Motorcycle Speakers
Motorcycle speakers for touring bikes, including 6.5-inch coaxial and midrange speakers from Cicada Audio, Ground Zero, Diamond Audio and Hertz, 6x9 coaxial models and 8-inch midrange options. Pick the size for your mounting location first, then match power to your amplifier.
THE REFERENCE STANDARD
Build It Right the First Time
Not sure which parts fit your exact bike and setup? Start with a clean, correct plan.
- Fitment confirmed for your exact bike and year
- Parts matched to your speakers and amplifier
- Build help from a GBS specialist
Browse Collections
-
Sky High Car Audio SH-HD8.4E 8" Speakers (Single) - Open Box
Vendor:Garage Bagger StereoCondition: Open Box / Return - Never installed. Packaging may show wear. Sky High Car Audio SH-HD8.4E are 8-inch speakers with 4Ω impedance. Designed for clean, powerful sound in motorcycle or marine applications. Single speaker. -
DC Audio Destroyer 10" - Open Box
Vendor:Garage Bagger StereoCondition: Open Box / Return - Never installed. Packaging may show wear. The DC Audio Destroyer is a 10-inch subwoofer designed for high-output bass in compact enclosures. Perfect for motorcycle or marine applications where space is limited. -
SoundQubed 6" BGX Series Pro‑Hybrid Mid w/ 2" Horn
Vendor:SoundQubedBagger / Motorcycle Speaker SoundQubed 6" BGX Series Pro‑Hybrid Mid w/ 2" Horn — Hybrid Horn Mid for Bagger Audio Why Riders Choose It Hybrid mid + horn for clarity and projection 6-inch pro driver built for bagger fairings/lids High sensitivity for loud results on motorcycle power Best With Active systems with proper HPF/LPF Matched horn drivers and DSP/EQ Solid mounting and weather protection Key Specifications Size 6" mid with integrated 2" horn Nominal Impedance 4Ω (check variant) Recommended HPF 100–150 Hz (install dependent) Motor/Frame Pro‑audio design for motorcycles Specs based on manufacturer materials. Verify impedance and enclosure/placement before installation. RMS Power Handling: 300W MAX Power Handling: 600W Freq. Response: 70Hz-20KHz Overall Diameter: 6.85" Overall Depth: 4.05" Mounting Depth: 3.7" Motor Diameter: 4.33" -
SaleDiamond Audio HXM8FBK 8" 2-Way High Output Marine Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio HXM8FBK 8" High-Output Horn Coaxial Speakers — 2Ω or 4Ω The Diamond Audio HXM8FBK Black Series 8-inch horn-loaded coaxial speakers are built for high-output motorcycle, marine, and powersports systems that need strong midrange projection, crisp high-frequency output, and weather-resistant construction. Available in both 2-ohm and 4-ohm versions, the HXM8FBK combines a rigid carbon-fiber cone, oversized 1.5-inch titanium dome tweeter, neodymium motor structure, and reinforced composite basket for serious output in demanding open-air environments. THE REFERENCE STANDARD High Output Built for Open-Air Audio Designed for motorcycles, boats, and powersports systems where projection, durability, and efficient output matter. Start a Build Consultation Call 864-334-6131 Diamond Audio HXM8FBK Key Specifications Series HXM Black Series Speaker Size 8 inches Speaker Type Horn-Loaded 2-Way Coaxial 2Ω Model HXM8F2BK 4Ω Model HXM8F4BK Power Handling 175W RMS / 600W MAX Sensitivity 95 dB (1W/1M) Voice Coil 2-inch Cone Material Carbon Fiber Tweeter 1.5-inch Oversized Titanium Dome Tweeter Motor Neodymium Basket Fiberglass-Reinforced Polymer / Composite Surround Rubber Xmax 3.25 mm Fs 83 Hz Mounting Depth 3.11″ (78.9 mm) Cutout Diameter 7.02″ (178.38 mm) Overall Diameter 8.31″ (211 mm) Overall Height 3.56″ (90.32 mm) Mounting Style Flush Mount or Back Mount Environmental Protection Water spray resistant, salt-water resistant, UV stable Fitment warning: Verify mounting depth, cutout diameter, grille clearance, enclosure depth, and speaker impedance before ordering. Rigid Carbon-Fiber Cone for Increased Output The HXM8FBK Black Series uses a rigid carbon-fiber cone designed to improve output and low-frequency impact while maintaining control at higher playback levels. Carbon fiber provides a strong, lightweight cone structure that is well suited to motorcycle and powersports systems where efficiency and projection are critical. Oversized 1.5-Inch Titanium Tweeter Diamond Audio pairs the 8-inch midrange cone with an oversized 1.5-inch titanium dome tweeter to increase high-frequency output and improve projection in open-air environments. That additional high-frequency energy helps the speaker remain clear against wind, road, engine, and exhaust noise. 175W RMS High-Output Power Handling Each HXM8FBK speaker is rated for 175 watts RMS and 600 watts maximum power. The available 2-ohm and 4-ohm versions allow the system designer to match amplifier loading and channel configuration more precisely. 2Ω — HXM8F2BK The 2-ohm version can be used when the amplifier and system design benefit from a lower impedance load and increased available channel output. 4Ω — HXM8F4BK The 4-ohm version offers additional flexibility for multi-speaker wiring, bridged amplifier configurations, and systems designed around higher-impedance loads. Neodymium Motor and High-Excursion Suspension The HXM8FBK uses a lightweight neodymium motor structure paired with Diamond Audio’s maximum-Xmax suspension design. The compact motor helps reduce weight and mounting depth while maintaining the magnetic strength required for high-output performance. Diamond lists 3.25 mm of Xmax on the current 4-ohm technical specification, giving the 8-inch cone usable excursion for stronger midbass performance. Built for Motorcycle, Marine and Powersports Environments The Black Series is designed for exposed audio installations where conventional automotive speakers may not survive long-term use. Water-spray resistant construction. Salt-water resistant materials. 100% UV-stable components. High-temperature lightweight injection-molded construction. Fiberglass-reinforced composite basket. Rubber surround. Flush-mount or back-mount installation capability. Motorcycle Audio System Applications The HXM8FBK is a strong option for custom Harley-Davidson, Indian, Slingshot, powersports, and marine systems where an 8-inch coaxial speaker is needed for high-output full-range or midrange-heavy operation. Common applications include custom fairing pods, lower pods, tour-pack enclosures, saddlebag installations, custom speaker panels, marine locations, and other fabricated 8-inch speaker positions. Application note: These are high-output 8-inch speakers and should not be treated as a universal drop-in replacement. Confirm the physical opening, mounting depth, enclosure volume, grille clearance, amplifier power, crossover strategy, and impedance before installation. Installation and Tuning Notes Choose the 2Ω or 4Ω version based on amplifier loading and complete system design. Verify the amplifier's RMS output at the selected speaker impedance. Confirm the 7.02-inch cutout and 3.11-inch mounting depth before fabrication. Check rear clearance for the motor structure and speaker terminals. Use appropriate crossover protection for the intended system and power level. Secure all mounting hardware for vibration-heavy motorcycle and powersports applications. Protect wiring and terminals from moisture, abrasion, heat, and moving components. Complete final EQ and crossover tuning after the full system is installed. Diamond Audio HXM Black Series Manual Review the current Diamond Audio HXM Black Series installation and specification manual before installation. Download HXM Black Series Manual Need Help Choosing 2Ω or 4Ω? Speaker impedance should be selected around the amplifier, number of speakers, channel configuration, wiring method, and overall system design — not simply by choosing the lowest impedance available. Start a Build Consultation Call 864-334-6131Sale -
Beyma PRO65ND - 6.5" Pro Neo Midrange Speaker (Single)
Vendor:BeymaBeyma PRO65ND 6.5" Pro Neo Midrange Speaker (Sold in singles) BEYMA PRO 65ND IS A HIGH POWER LIGHTWEIGHT 6.5" MIDRANGE SPEAKER FROM THE BEYMA COMPETITION SERIES FEATURES A VERY HIGH EFFICIENCY OF 100DB SPL DELIVERS CLEAR, CRISP & DETAILED MIDRANGE OF HIGH QUALITY AVAILABLE IN 4 OHMS ONLY Specifications Nominal Basket Diameter 6.5 / 165mm Impedance 4 ohms Frequency Response 150Hz - 8.0kHz Sensitivity (1W/1m) 100dB Voice Coil Diameter 1.5" / 38.5mm BL Factor 8.2 N/A Mounting Information Overall Diameter 6.5" / 165mm Bolt Circle Diameter 6.14" / 156mm Baffle Cutout Diameter- - Front Mount 5.67" / 144mm No. Of Mounting Holes 4 Overall Depth 2.74" / 70mm Materials Basket Die Cast Aluminum Cone Paper Thiele-Small Parameters Resonant Frequency (fs) 215 Hz Impedance (Re) 3.5 ohms Coil Inductance (Le) .35 mH Mechanical Q (Qms) 8.0 Electrical Factor (Qes) .51 Total Q (Qts) .48 Comp. Equivelant Vol. (Vas) .074 ft3 / 2.1 Liters Surface Area of Cone (Sd)m2 0.140 Reference Efficiency 4% -
DS18 PRO-HY10.4B 10" Pro Coaxial Speaker
Vendor:DS18 BoatThe DS18 PRO-HY10.4B is a 10" hybrid mid-range loudspeaker with a built-in 1.5" compression driver horn, sold as a single. The horn uses a titanium diaphragm and neodymium magnet, so one driver covers midrange and highs.Key Specs Power handling: 350W RMS / 700W max Nominal impedance 4 ohm; sensitivity 100dB (1W/1m) Frequency response: 40Hz-20kHz; recommended high-pass crossover 70Hz Water-resistant cone Overall diameter 10.3"; overall depth 5.7"; mounting depth 5.31" 2 year manufacturer warranty for defects (per store listing) Fitment and Installation NotesAt 5.31" mounting depth this driver needs deep mounting space, so verify clearance before ordering.Browse more motorcycle pro coaxial speakers and DS18 motorcycle audio, or get a custom build planned around your bike.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Rockford Fosgate M2 10" Color Optix™ 2-Way Horn Loaded Speaker
Vendor:RF Boat10" Color Optix™ 2-Way Horn Loaded Speaker Specifications Speaker Type 2 way Size 10" Power Handling 300 RMS /1200 PEAK Impedance 4Ω Crossover 12dB/Octave Sensitivity 94DB Freq Response 20Hz- 25kHz Shipping Weight 10.2 Lbs. Sold in pairs Features & Benefits: Color Optix™: Adjust your own bright, wide, and limitless lighting experience with the Rockford Fosgate Color Optix™ plug-and-play controller and App (Sold Separately.) Element Ready™: Purpose Built for the Marine Environment, Rockford’s Element Ready™ products are built to stand up to Water, Salt, and UV, making sure your speakers stand the test of time. Infinite Customization: Multiple grille options are designed to dial in your personalized-on water experience. True Marine Ecosystem: Dual Integrated Deutsch™ / Amphenol™ connections provide industry leading marine plug-and-play connectivity and flexible install options. -
SaleDB Drive Euphoria XPERT EX10NCD 10″ 2-Way Loudspeaker
Vendor:DB DriveThe DB Drive Euphoria XPERT EX10NCD is a 10" 2-way loudspeaker with a rear-mounted full-size compression driver. It is a pro coaxial design for high-efficiency bagger builds.Key Specs 2.5" (63.5mm) voice coil, neodymium ring magnet Rear-mounted compression driver with 1.4" (36mm) polyester diaphragm and conical HF waveguide IP52 rated paper cone, treated cloth surround, die-cast aluminum basket 12dB passive crossover and protective grills included Power handling: 500W, dynamic 1000W Nominal impedance 5.2 ohm; sensitivity 106.1dB (1W/1m); frequency response 70Hz-20kHz Fitment and Installation NotesCheck the depth and cutout against your lid or bag, and plan for the adapter rings your build needs.Browse more motorcycle pro coaxial speakers and speaker adapters, or get a custom build planned around your bike.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleDiamond Audio HXM57F2BK 5×7 Harley Direct Replacement Speakers | 2Ω – Pair
Vendor:Diamond AudioThe Diamond Audio HXM57F2BK is a pair of 5x7-inch 2-way coaxial speakers from the HXMF Black Series, made as a direct replacement for factory Harley-Davidson fairing speaker locations. It uses a 2-ohm design with a 1.25-inch titanium dome tweeter.Key Specs Impedance: 2 ohms; sold as a pair Power: 150W RMS / 300W max; sensitivity 91 dB (1W/1m) Rigid carbon fiber cone, neodymium magnet, injection-molded composite basket 1.25-inch titanium dome tweeter Mounting depth 2.55 in (64.84mm); cutout diameter 7.11 in (180.72mm) Overall size 7.80 x 5.44 in; overall height 3.11 in; flush or back mount UV stable and water-spray resistant Fitment and Installation NotesDiamond Audio describes these as a direct fit for factory Harley-Davidson fairing speaker locations but does not list specific models or years, so confirm your bike with us first.Related: coaxial speakers, Diamond Audio, motorcycle speaker lids.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleHertz SPL Show SV 200.1 8" SPL Midrange Speakers (Set)
Vendor:HertzHertz SPL Show SV 200.1 8" SPL Midrange Speakers (Set) The Hertz SV 200.1 is a ferrite-magnet SPL midrange built to get loud and stay loud. A 38 mm (1.5 in) double-layer copper voice coil on a KSV former, tin-plated high-current terminals, a damped fabric surround and an ultra-light water-repellent paper cone deliver 100 dB sensitivity from an 8-inch frame. Hertz Motorcycle Audio8-inch Mid-Range SpeakersMotorcycle Amplifiers Hertz SPL Show Midrange8-inch SPL Midrange, 100 dB Sensitivity Ferrite-magnet 8-inch SPL midrange for loud lids, lowers and Tour-Paks. 500W peak / 150W continuous at 4Ω 100Hz–9kHz frequency response 38 mm (1.5 in) voice coil, ferrite magnet Start a Build ConsultationCall 864-334-6131 Key Product Details Product Hertz SPL Show SV 200.1 8" SPL Midrange Speakers (Set) Speaker Type 8-inch (200mm) SPL midrange, 4Ω Best For High-output midrange in bagger lids, Tour-Paks, fairing lowers and custom enclosures System Goal Loud, punchy midrange that holds up to amplifier power Impedance 4Ω Sold As Set Install Focus 83.8 mm mounting depth; confirm the opening and depth before ordering Always verify mounting depth, opening size, impedance, amplifier power and crossover settings before ordering or installing these speakers.Why the SV 200.1 and Not the NEO Hertz builds the SV 200.1 around a high density flux ferrite magnet. The SV NEO models use a neodymium magnet with UV and waterproofing treatment. The .1 is the ferrite-magnet SPL midrange and sits at a lower price. It is a midrange, not a full-range coaxial. Run it on an amplifier with a crossover or DSP, and pair it with a tweeter or compression driver for the top end.Speaker Specifications Nominal Diameter 200 mm (8-inch) Impedance 4Ω Power Handling 500W peak / 150W continuous (AES) Sensitivity 100 dB Frequency Response 100Hz–9kHz Voice Coil 38 mm (1.5 in), double-layer copper on KSV former Magnet High density flux ferrite, 130 x 60 x 20 mm Cone Ultra-light water-repellent pressed paper Surround Damped fabric Xmax 1.5 mm Mounting Depth 83.8 mm Grilles Included No Thiele-Small Parameters Re 3.2Ω Fs 103 Hz Le 0.22 mH Vas 7.5 L Mms 16.5 g Cms 0.1 mm/N BL 8.3 T•m Qts 0.55 Qes 0.58 Qms 10.3 Recommended System Planning Give the SV 200.1 amplifier power that respects its 150W continuous rating, a crossover or DSP to keep it in its 100Hz–9kHz range, and an opening with at least 83.8 mm of mounting depth. Pair it with a compression tweeter for the high end. If you are unsure whether it fits your lids, Tour-Pak, lowers or custom enclosure, contact Garage Bagger Stereo before ordering.What to Pair With the SV 200.1 Power, tuning and high-frequency parts for an SPL midrange build. Hertz SP 4.900 4-Channel Motorcycle Amplifier Sealed Hertz 4-channel amplifier for midrange pairs. Hertz ST 25K NEO SPL Show Tweeters Hertz bullet compression tweeters for the top end. Hertz S8 DSP Crossover, EQ and time alignment. Motorcycle Speaker Installation Adapters, mounting and wiring parts. Related Hertz & Motorcycle Audio Paths Compare Hertz midrange options and build the system around them. Shop 8-inch motorcycle mid-range speakers Shop all motorcycle mid-range speakers Compare the Hertz SV 200 NEO SPL Show midrange Shop Hertz motorcycle audio amplifiers, speakers and DSP Shop motorcycle amplifiers for Harley bagger audio systems Best Use for the SV 200.1 Choose it for SPL-style midrange in lids, Tour-Paks, lowers or custom enclosures where output per dollar matters and the speaker is protected from direct weather. Designed Around Real Motorcycle Audio Wind noise, road speed and enclosure space decide how loud a midrange has to play. Plan it with the amplifier, crossover and tweeters. Hertz SV 200.1 FAQ What is the power rating of the SV 200.1? Hertz rates it at 500W peak and 150W continuous (AES) at 4Ω, with 100 dB sensitivity. What is the difference between the SV 200.1 and the SV NEO? The SV 200.1 uses a high density ferrite magnet. The SV NEO models use a neodymium magnet with UV and waterproofing treatment. How deep is the SV 200.1? Hertz lists a mounting depth of 83.8 mm. Is the SV 200.1 sold as a pair? It is sold as a set. Does the SV 200.1 need a crossover? Yes. It is a midrange with a 100Hz–9kHz response, so run it on an amplifier crossover or DSP and add a tweeter for the high end. Does Garage Bagger Stereo install the SV 200.1? Garage Bagger Stereo installs motorcycle audio at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz SPL Show SV 165.1 6.5" SPL Midrange Speakers (Set)
Vendor:HertzHertz SPL Show SV 165.1 6.5" SPL Midrange Speakers (Set) The Hertz SV 165.1 is a ferrite-magnet SPL midrange built to get loud and stay loud. A 38 mm (1.5 in) double-layer copper voice coil on a KSV former, tin-plated high-current terminals, a damped fabric surround and an ultra-light water-repellent paper cone deliver 97 dB sensitivity from a 6.5-inch frame. Hertz Motorcycle Audio6.5-inch Mid-Range SpeakersMotorcycle Amplifiers Hertz SPL Show Midrange6.5-inch SPL Midrange, 97 dB Sensitivity Ferrite-magnet SPL midrange for loud lids, lowers and Tour-Paks. 400W peak / 200W continuous at 4Ω 100Hz–10kHz frequency response 38 mm (1.5 in) voice coil, ferrite magnet Start a Build ConsultationCall 864-334-6131 Key Product Details Product Hertz SPL Show SV 165.1 6.5" SPL Midrange Speakers (Set) Speaker Type 6.5-inch (165mm) SPL midrange, 4Ω Best For High-output midrange in bagger lids, Tour-Paks, fairing lowers and custom enclosures System Goal Loud, punchy midrange that holds up to amplifier power Impedance 4Ω Sold As Set Install Focus 66 mm mounting depth; confirm the opening and depth before ordering Always verify mounting depth, opening size, impedance, amplifier power and crossover settings before ordering or installing these speakers.Why the SV 165.1 and Not the NEO Hertz builds the SV 165.1 around a high density flux ferrite magnet. The SV NEO models use a neodymium magnet with UV and waterproofing treatment. The .1 is the ferrite-magnet SPL midrange and sits at a lower price. It is a midrange, not a full-range coaxial. Run it on an amplifier with a crossover or DSP, and pair it with a tweeter or compression driver for the top end.Speaker Specifications Nominal Diameter 165 mm (6.5-inch) Impedance 4Ω Power Handling 400W peak / 200W continuous (AES) Sensitivity 97 dB Frequency Response 100Hz–10kHz Voice Coil 38 mm (1.5 in), double-layer copper on KSV former Magnet High density flux ferrite, 110 x 45 x 20 mm Cone Ultra-light water-repellent pressed paper Surround Damped fabric Xmax 1.2 mm Mounting Depth 66 mm Grilles Included No Thiele-Small Parameters Re 3.2Ω Fs 110 Hz Le 0.26 mH Vas 4.65 L Mms 10.4 g Cms 0.2 mm/N BL 6.5 T•m Qts 0.5 Qes 0.55 Qms 5.53 Recommended System Planning Give the SV 165.1 amplifier power that respects its 200W continuous rating, a crossover or DSP to keep it in its 100Hz–10kHz range, and an opening with at least 66 mm of mounting depth. Pair it with a compression tweeter for the high end. If you are unsure whether it fits your lids, Tour-Pak, lowers or custom enclosure, contact Garage Bagger Stereo before ordering.What to Pair With the SV 165.1 Power, tuning and high-frequency parts for an SPL midrange build. Hertz SP 4.900 4-Channel Motorcycle Amplifier Sealed Hertz 4-channel amplifier for midrange pairs. Hertz ST 25K NEO SPL Show Tweeters Hertz bullet compression tweeters for the top end. Hertz S8 DSP Crossover, EQ and time alignment. Motorcycle Speaker Installation Adapters, mounting and wiring parts. Related Hertz & Motorcycle Audio Paths Compare Hertz midrange options and build the system around them. Shop 6.5-inch motorcycle mid-range speakers Shop all motorcycle mid-range speakers Compare the Hertz SV 165 NEO SPL Show midrange Shop Hertz motorcycle audio amplifiers, speakers and DSP Shop motorcycle amplifiers for Harley bagger audio systems Best Use for the SV 165.1 Choose it for SPL-style midrange in lids, Tour-Paks, lowers or custom enclosures where output per dollar matters and the speaker is protected from direct weather. Designed Around Real Motorcycle Audio Wind noise, road speed and enclosure space decide how loud a midrange has to play. Plan it with the amplifier, crossover and tweeters. Hertz SV 165.1 FAQ What is the power rating of the SV 165.1? Hertz rates it at 400W peak and 200W continuous (AES) at 4Ω, with 97 dB sensitivity. What is the difference between the SV 165.1 and the SV NEO? The SV 165.1 uses a high density ferrite magnet. The SV NEO models use a neodymium magnet with UV and waterproofing treatment. How deep is the SV 165.1? Hertz lists a mounting depth of 66 mm. Is the SV 165.1 sold as a pair? It is sold as a set. Does the SV 165.1 need a crossover? Yes. It is a midrange with a 100Hz–10kHz response, so run it on an amplifier crossover or DSP and add a tweeter for the high end. Does Garage Bagger Stereo install the SV 165.1? Garage Bagger Stereo installs motorcycle audio at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz SPL Show SV 250.1 10" SPL Midrange Speaker (Each)
Vendor:HertzHertz SPL Show SV 250.1 10" SPL Midrange Speaker (Each) The Hertz SV 250.1 is a ferrite-magnet SPL midrange built to get loud and stay loud. A 50 mm double-layer copper voice coil on a KSV former, tin-plated high-current terminals, a damped fabric surround and an ultra-light water-repellent paper cone deliver 101 dB sensitivity from a 10-inch frame. Hertz Motorcycle Audio10-inch Mid-Range SpeakersMotorcycle Amplifiers Hertz SPL Show Midrange10-inch SPL Midrange, 101 dB Sensitivity Ferrite-magnet 10-inch SPL midrange for builds with room for a big driver. 500W peak / 150W continuous at 4Ω 90Hz–7kHz frequency response 50 mm voice coil, ferrite magnet Start a Build ConsultationCall 864-334-6131 Key Product Details Product Hertz SPL Show SV 250.1 10" SPL Midrange Speaker (Each) Speaker Type 10-inch (250mm) SPL midrange, 4Ω Best For High-output midrange in bagger lids, Tour-Paks, fairing lowers and custom enclosures System Goal Loud, punchy midrange that holds up to amplifier power Impedance 4Ω Sold As Each (single speaker) Install Focus 101 mm mounting depth; confirm the opening and depth before ordering Always verify mounting depth, opening size, impedance, amplifier power and crossover settings before ordering or installing these speakers.A 10-Inch SPL Midrange for Big Openings The SV 250.1 puts a 50 mm voice coil, a 155 mm high density ferrite magnet and 3 mm of Xmax behind a 10-inch water-repellent paper cone, rated at 101 dB sensitivity. It is made for builds with room for a 10-inch driver and the power to push it. It is a midrange, not a full-range coaxial. Run it on an amplifier with a crossover or DSP, and pair it with a tweeter or compression driver for the top end.Speaker Specifications Nominal Diameter 250 mm (10-inch) Impedance 4Ω Power Handling 500W peak / 150W continuous (AES) Sensitivity 101 dB Frequency Response 90Hz–7kHz Voice Coil 50 mm, double-layer copper on KSV former Magnet High density flux ferrite, 155 x 70 x 20 mm Cone Ultra-light water-repellent pressed paper Surround Damped fabric Xmax 3 mm Mounting Depth 101 mm Grilles Included No Thiele-Small Parameters Re 3.3Ω Fs 90 Hz Le 0.23 mH Vas 20 L Mms 26.5 g Cms 0.12 mm/N BL 10.7 T•m Qts 0.4 Qes 0.42 Qms 12.1 Recommended System Planning Give the SV 250.1 amplifier power that respects its 150W continuous rating, a crossover or DSP to keep it in its 90Hz–7kHz range, and an opening with at least 101 mm of mounting depth. Pair it with a compression tweeter for the high end. If you are unsure whether it fits your lids, Tour-Pak, lowers or custom enclosure, contact Garage Bagger Stereo before ordering.What to Pair With the SV 250.1 Power, tuning and high-frequency parts for an SPL midrange build. Hertz SP 4.900 4-Channel Motorcycle Amplifier Sealed Hertz 4-channel amplifier for midrange pairs. Hertz ST 25K NEO SPL Show Tweeters Hertz bullet compression tweeters for the top end. Hertz S8 DSP Crossover, EQ and time alignment. Motorcycle Speaker Installation Adapters, mounting and wiring parts. Related Hertz & Motorcycle Audio Paths Compare Hertz midrange options and build the system around them. Shop 10-inch motorcycle mid-range speakers Shop all motorcycle mid-range speakers Compare the Hertz SPL Show SV 200L 8-inch woofers Shop Hertz motorcycle audio amplifiers, speakers and DSP Shop motorcycle amplifiers for Harley bagger audio systems Best Use for the SV 250.1 Choose it for SPL-style midrange in custom enclosures, lids or Tour-Paks with a 10-inch opening and at least 101 mm of depth, where the speaker is protected from direct weather. Designed Around Real Motorcycle Audio Wind noise, road speed and enclosure space decide how loud a midrange has to play. Plan it with the amplifier, crossover and tweeters. Hertz SV 250.1 FAQ What is the power rating of the SV 250.1? Hertz rates it at 500W peak and 150W continuous (AES) at 4Ω, with 101 dB sensitivity. How deep is the SV 250.1? Hertz lists a mounting depth of 101 mm. Is the SV 250.1 sold as a pair? No. The SV 250.1 is sold each (single speaker). Does the SV 250.1 need a crossover? Yes. It is a midrange with a 90Hz–7kHz response, so run it on an amplifier crossover or DSP and add a tweeter for the high end. What are the SV 250.1 Thiele-Small parameters? Hertz lists Fs 90 Hz, Qts 0.4, Vas 20 L, Xmax 3 mm and BL 10.7 T•m. Does Garage Bagger Stereo install the SV 250.1? Garage Bagger Stereo installs motorcycle audio at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale
Motorcycle Speakers at a Glance
| Speaker Types | Coaxial, pro coaxial, midrange, mid-bass, component kits and subwoofers |
| Sizes | 6.5", 6x9", 8" and 10" |
| Brands | Cicada Audio, Ground Zero, Diamond Audio, Hertz, DB Drive, DS18, Beyma, PRV Audio, Rockford Fosgate |
| Platforms | Harley-Davidson touring fairings, saddlebag lids and Tour-Pak builds, plus custom baggers |
| Best For | Replacing factory speakers or building a full amplified system |
Summarized from the products in this collection. Confirm your model, year and speaker size on each product page before ordering.
Motorcycle Speakers
This is the full range of motorcycle speakers at Garage Bagger Stereo: coaxial and pro coaxial speakers for simple upgrades, midrange and mid-bass drivers for output and clarity, component kits for 2024-Present Harley-Davidson fairings, and subwoofers for saddlebag and Tour-Pak builds.
Start with the size your bike uses in each location, then choose the speaker type and the amplifier power that matches it.
Shop Speakers by Size and Type
Jump to the part of the build you are working on.
6.5" Speakers
6x9" Speakers
Coaxial Speakers
Pro Coaxial Speakers
Midrange Speakers
Subwoofers
Speaker Installation
Amplifiers
Choosing Motorcycle Speakers
Work through these before you order:
- Speaker size for each location: fairing, saddlebag lid, lower or Tour-Pak
- Impedance, 2 ohm or 4 ohm, so it matches your amplifier wiring plan
- Power handling compared with the amplifier you are using
- Mounting depth and the adapter or ring the speaker needs
- Harley-Davidson model and year, since 2024-Present bikes use their own kits
Not sure what fits your bike? Call us or request a custom build consultation and we will match speakers to your build.
Need Help Choosing Motorcycle Speakers?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.