Collection: MMats Pro Audio
MMats Pro Audio for Harley-Davidson Baggers
Upgrade your Harley-Davidson Touring motorcycle with MMats Pro Audio amplifiers, speakers, and compression drivers from Garage Bagger Stereo. Explore high-output motorcycle audio components for clearer, more powerful sound on the road.
Built for High-Output Motorcycle Audio
Explore MMats LSX Series amplifiers, motorcycle speakers, and compression drivers for custom Harley-Davidson bagger audio installations.
Match your components to your motorcycle, amplifier configuration, speaker impedance, and performance goals.
MMats LSX Series Motorcycle Amplifiers
The MMats LSX Series provides amplifier options for custom Harley-Davidson motorcycle audio systems. Whether you're upgrading fairing speakers, adding saddlebag speakers, or planning a high-output build, selecting the right amplifier starts with the speaker configuration and required power.
Explore the available MMats LSX amplifiers to compare configurations for your next motorcycle audio upgrade.
MMats Motorcycle Speakers & Compression Drivers
Build a system that delivers strong midbass, clear vocals, and the output needed to compete with highway wind and road noise.
Shop MMats motorcycle speakers and compression drivers for custom bagger installations. Confirm speaker dimensions, mounting depth, impedance, and compatible installation locations before ordering.
Build Your Harley Audio System with GBS
Garage Bagger Stereo specializes in Harley-Davidson motorcycle audio upgrades, including amplifiers, speakers, wiring, DSP tuning, and custom installation solutions.
Browse the MMats Pro Audio collection and compare components for your motorcycle's audio system.
Need help choosing the correct combination? Contact Garage Bagger Stereo for assistance with system planning and fitment.
Browse Collections
-
SaleMMATS MBW690 6x9" Subwoofer — NOT FOR LIDS
Vendor:MMats Pro AudioMMATS Pro Audio MBW690 6×9" Subwoofer Single FITMENT WARNING — READ BEFORE ORDERING MMATS believes this to be the first in our industry of a true 6×9 Subwoofer. The Voice Coil is the same spec as our LS series of subwoofers. At 2” in diameter and a winding length of 1.25”, this subwoofer delivers an excursion that has never been seen before in a 6×9 speaker. An excellent under-the-seat truck application and with 4 of these firing forward, the amount of bass is sure to impress. Most importantly, you do not need to raise your seat. At a 2 cubic feet net with a 20 sq. inch port tuned to 35Hz, you would be hard-pressed to find a higher output approach—a tremendous subwoofer for Bagger Audio. Specs: Power Handling: 500 Watts Program / 300 Watts RMS Voice Coil: 2" Copper wire, Aluminum former, single 4-ohm Magnet: 50 oz. Y-30 ferrite magnet / NEO blend Freq. Response: 28Hz-250Hz Efficiency: 88dB 1 watt @ 1 meter NOT MADE FOR SPEAKER LIDS This MMATS MBW690 is a 6x9" subwoofer, not a standard 6x9 speaker and not a drop-in speaker-lid replacement. This subwoofer does not fit standard Harley-Davidson speaker lids. Special order item. 20% restocking fee applies. Do not order by size alone. If you are unsure about fitment, mounting depth, enclosure space, amplifier power, or whether this will work for your motorcycle audio build, call Garage Bagger Stereo at 864-334-6131 before ordering.Sale -
MMATS PRO AUDIO LSX600x4
Vendor:MMats Pro AudioMMATS PRO AUDIO LSX600x4 4-Channel Amplifier RMS Power @4Ω 100Wx4 RMS Power @2Ω 150Wx4 RMS Power @1Ω 300Wx2 Freq Response (-3dB) - 10Hz to 22KHz THD - <0.1% Signal-to-Noise Ratio - >96dB Efficiency@Full Power - 94% 4-ohms stereo Dimensions - 4.3" x 4.2" x 1.7" -
MMATS PRO AUDIO LSX1000.1D
Vendor:MMats Pro AudioMMATS PRO AUDIO LSX1000.1D Mono Amplifier RMS Power @4Ω 350Wx1 RMS Power @2Ω 750Wx1 RMS Power @1Ω 1200Wx1 Freq Response (-3dB) - 10Hz to 22KHz THD - <0.1% Signal to Noise Ratio - >96dB Efficiency@Full Power - 86% 1-ohm Resistive Dimensions - 5 x 6.43 x 2.2 -
MMATS PRO AUDIO LSX900x4
Vendor:MMats Pro AudioMMATS PRO AUDIO LSX900x4 4-Channel Amplifier RMS Power @4Ω 150Wx4 RMS Power @2Ω 220Wx4 RMS Power @1Ω 440Wx2 Freq Response (-3dB) - 10Hz to 22KHz THD - <0.1% Signal to Noise Ratio - >96dB Efficiency@Full Power - 88% 2-ohms stereo Resistive Dimensions - 5.2" x 5" x 2.1" -
MMATS PRO AUDIO LSX2000.1D
Vendor:MMats Pro AudioMMATS PRO AUDIO LSX2000.1D Mono Amplifier RMS Power @4Ω 660Wx1 RMS Power @2Ω 1325Wx1 RMS Power @1Ω 2000Wx1 Freq Response (-3dB) - 10Hz to 22KHz THD - <0.1% Signal to Noise Ratio - >96dB Efficiency@Full Power - 84% 1-ohm Resistive Dimensions - 7 x 5.2 x 2.1 -
MMATS PRO AUDIO LSX1400x4
Vendor:MMats Pro AudioMMATS PRO AUDIO LSX1400x4 4-Channel Amplifier RMS Power @4Ω 225Wx4 RMS Power @2Ω 360Wx4 RMS Power @1Ω 720Wx2 Freq Response (-3dB) - 10Hz to 22KHz THD - <0.1% Signal to Noise Ratio - >96dB Efficiency@Full Power - 86% 2-ohm stereo Resistive Dimensions - 7.0" x 5.2" x 2.0" -
MMATS PRO AUDIO LSX4000.1D
Vendor:MMats Pro AudioMMATS PRO AUDIO LSX4000.1D Mono Amplifier RMS Power @4Ω 1280Wx1 RMS Power @2Ω 2100Wx1 RMS Power @1Ω 4000Wx1 RMS Power Mono Ω 600wx2CH Freq Response (-3dB) - 10Hz to 20KHz THD - <0.05% Signal to Noise Ratio - >96dB Efficiency@Full Power - 79% Dimensions - 9.4 x 6 x 2.25 -
MMATS PRO AUDIO LSX2600x4
Vendor:MMats Pro AudioMMATS PRO AUDIO LSX2600x4 4-Channel Amplifier RMS Power @4Ω 430Wx4 RMS Power @2Ω 660Wx4 RMS Power @1Ω 1320Wx2 Freq Response (-3dB) - 10Hz to 22KHz THD - <0.1% Signal to Noise Ratio - >96dB Efficiency@Full Power - 86% 2-ohm stereo Resistive Dimensions - 8.25" x 5.2" x 2.0" -
MMATS PRO AUDIO LSX8000.1D
Vendor:MMats Pro AudioMMATS PRO AUDIO LSX8000.1D Mono Amplifier RMS Power @4Ω 2680Wx1 RMS Power @2Ω 4325Wx1 Freq Response (-3dB) - 10Hz to 22KHz THD - <0.1% Signal to Noise Ratio - >96dB Efficiency@Full Power - 86% 2-ohm Resistive Dimensions - 10" x 6.43" x 2.2" -
MMATS PRO AUDIO HiFi-4250D
Vendor:MMats Pro AudioMMATS PRO AUDIO HiFi-4250D Class D 4-Channel Amplifier RMS Power 250Wx4 @4Ω RMS Power 400Wx4 @2Ω RMS Power 800x2 @4Ω bridged DirectFet Technology Burr Brown op amps Dimensions - 9.5" x 10" x 2.2" -
MMATS PRO AUDIO HiFi-6150D
Vendor:MMats Pro AudioMMATS PRO AUDIO HiFi-6150D Class D 6-Channel Amplifier RMS Power 150Wx6 @4Ω RMS Power 275Wx6 @2Ω RMS Power 150Wx4 @4Ω + 1000WRMS @ 1 ohm mono RMS Power 275Wx4 @2Ω + 550WRMS @ 2 ohm mono DirectFet Mosfets Burr Brown pre-amp Dimensions - 9.5" x 10" x 2.25"
