Browse Collections
-
SaleCicada Audio CH65 6.5" Pro Coaxial Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio CH65 6.5" Pro Coaxial Horn Speaker Pair Cicada Audio CH65 6.5" Pro Coaxial Horn Speakers are built for Harley-Davidson baggers and high-output motorcycle audio systems that need real volume, strong projection, and cleaner sound at highway speed. The CH65 combines a powerful midbass driver with an integrated horn tweeter for loud vocals, crisp highs, aggressive open-air output, and the kind of efficiency needed for amplified Harley audio builds. Shop Cicada Audio 6.5" Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD High-Output 6.5" Cicada Speakers for Harley Audio Built for riders who want louder fairing speaker output, sharper vocals, stronger mids, and better projection from a 6.5" motorcycle speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CH65 6.5" Pro Coaxial Horn Speaker Pair Current Part Numbers CH652C = 2Ω version / CH654C = 4Ω version Speaker Size 6.5" Speaker Type Pro coaxial horn speaker Sold As Pair Best For Harley-Davidson bagger audio, fairing speaker upgrades, high-output motorcycle audio systems, and amplified 6.5" speaker locations System Goal Louder vocals, stronger mids, crisp highs, better projection, and cleaner highway-speed output Always verify impedance, amplifier power, speaker pod fitment, mounting depth, wiring, and tuning before ordering for your Harley-Davidson audio build. Built for Loud Harley-Davidson Bagger Audio The Cicada CH65 is a strong choice for riders upgrading factory Harley-Davidson audio systems with aftermarket amplifier power. These speakers are made for motorcycle audio builds where basic replacement speakers are not enough and the goal is more volume, stronger clarity, and real projection while the bike is moving. If you are building a louder fairing speaker setup, a pro-audio style motorcycle system, or a high-output Harley bagger audio upgrade, the CH65 gives you the efficiency and output needed to cut through wind noise, road noise, and helmet interference. Fitment Note On 2015+ Road Glide models, speaker pods may require modification for proper installation. Always verify pod clearance, mounting depth, speaker location, impedance, amplifier compatibility, and final system layout before ordering. Specifications Power Handling 500 watts RMS / 1000 watts max per pair Frequency Response 75Hz–20kHz +/-5dB Magnet Structure Neodymium high-energy lightweight N35 magnet Basket Heavy-duty die-cast aluminum basket Midbass Voice Coil 2.0" high-temp voice coil Tweeter Voice Coil 1.4" aluminum diaphragm high-temp voice coil Sensitivity 94dB / 99dB average 1W/1M, 2.83V Crossover 12dB crossover with custom-tooled vented crossover case Bi-Amp Capable Horn tweeters can be run on dedicated amplifier channels Heat Control Advanced voice coil heat sink design for improved heat dissipation Speaker Control Shorting ring design for improved speaker control Mounting Depth 3.0" / 76.2mm Mounting Diameter 5.7" / 145.5mm Treatment Weather treated for motorcycle audio use Sold Pair Best Use for the Cicada CH65 The Cicada CH65 is best used in Harley-Davidson motorcycle audio builds where the goal is louder fairing speaker output, stronger vocal projection, improved clarity, and more efficient performance from a 6.5" speaker location. Amplified System Recommended These are not basic replacement speakers. The CH65 is intended for amplified motorcycle audio systems where output, control, tuning, and projection matter. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation path. These related collections help match the CH65 with the right Harley audio upgrade direction. Shop Motorcycle 6.5" Pro Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuningSale -
SaleCicada Audio HDPG8K 8 Gauge HD OFC Amplifier Installation Kit
Vendor:Cicada AudioCicada Audio HDPG8K 8 GUAGE POWER/GROUND HARNESS KIT FOR HD Looking to upgrade your audio system on your HD motorcycle? Using one of our amplifiers? Then this is the Heavy Duty power kit solution for your motorcycle audio needs. The HDPG8K Power/ground kit is designed to handle the higher current needs of the Cicada Audio DSP125.4D/CX125.4 and CX250.2 amplifiers. HDPG8K Power kit uses high-quality 8-gauge OFC copper cable eliminating chances of corrosion or increases cable resistance over time due to the harsh open environment. Capable of supplying current to most any heavy-duty application up to 60A (or 1000 WRMS!) of continuous current draw. HDPG8K Power Kit comes complete with a custom-molded WaterProof fuse holder (w/fuse), insulated high current ring terminals, and factory-type wire looming for the ultimate in power cable integration. Works In Most Any Motorcycle Amplifier Application Up To 60A. Includes Custom Tooled WaterProof Hi-Current Fuse Holder (w/60A fuse). Pre-Terminated And Insulated Battery Ring Terminals. 8-Gauge Hi-Quality OFC Copper Core Cable (No CCA garbage here). Loomed Harness Design Improved Integration And Ease Of Installation Into Your Motorcycle. Will work for any amp requiring 8g wiringSale -
SaleCicada Audio CX65 6.5" Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CX65 6.5" Coaxial Speaker Pair Cicada Audio CX65 6.5" Coaxial Speakers are built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and bagger audio systems that need clean sound, shallow fitment, weatherproof construction, and simple 6.5" speaker upgrade performance. Available in 2Ω and 4Ω versions, the CX65 gives riders a strong full-range coaxial speaker option for factory-style Harley speaker locations. Shop Cicada Audio 6.5" Coaxial Speakers Cicada Amplifiers THE REFERENCE STANDARD Shallow 6.5" Cicada Speakers for Harley Audio Built for riders who want clean full-range sound, simple factory-style fitment, weatherproof durability, and stronger output from a 6.5" Harley-Davidson speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CX65 6.5" Coaxial Speaker Pair Speaker Size 6.5" Speaker Type High-performance full-range coaxial motorcycle speaker Impedance Options 2Ω and 4Ω versions available depending on selected variant Best For Harley-Davidson Touring audio upgrades, 2014+ Harley factory-style 6.5" speaker locations, fairing speaker upgrades, and clean full-range motorcycle audio systems System Goal Clean sound, shallow fitment, better clarity, weatherproof durability, efficient output, and improved Harley bagger audio Sold As Pair Always verify impedance, speaker location, mounting depth, grille clearance, amplifier compatibility, and final fitment before ordering for your Harley-Davidson audio build. Built for 2014+ Harley-Davidson Fairing Speaker Upgrades The Cicada CX65 is designed as a strong 6.5" speaker upgrade for 2014 and later Harley-Davidson factory-style fairing speaker locations. Its shallow, low-profile design helps simplify installation while giving riders better output, cleaner clarity, and weatherproof performance compared to basic factory replacement speakers. The CX65 does not require a separate tweeter location in the fairing. The full-range coaxial design keeps the install cleaner while still giving Harley riders better sound quality, improved efficiency, and a stronger motorcycle audio foundation. Weatherproof Full-Range Coaxial Design The CX65 uses a weatherproof IMPP cone with NBR surround, high-temperature polymer frame, PEI dome tweeter, neodymium magnet structure, built-in 6dB crossover, DPSH® Dual-Phase Slot Horn design, and advanced voice coil heat sink construction. The 2Ω version can help produce more output with smaller, higher-efficiency amplifiers, while the 4Ω version gives builders another option depending on amplifier setup, system layout, and final impedance goals. Specifications Speaker Size 6.5" coaxial speaker Power Handling 100 watts RMS / 200 watts max Frequency Response 54Hz–20kHz +/-5dB Sensitivity 94dB 1W/1M average, 2.83V Magnet Structure Neodymium high-energy lightweight N35 magnet structure Cone Waterproof IMPP cone Surround NBR surround Frame / Basket Heavy-duty injected high-temperature polymer frame Midbass Voice Coil 1.4" high-temperature 2Ω or 4Ω Black Coat™ voice coil Tweeter 1.0" PEI dome tweeter with neodymium magnet Horn / Dispersion Technology DPSH® Dual-Phase Slot Horn Crossover Built-in 6dB crossover Speaker Control Shorting ring design for improved speaker control Heat Control Advanced voice coil heat sink design for improved heat dissipation Mounting Depth 2.26" / 57.4mm Mounting Diameter 5.32" / 135.1mm Outside Dimensions 6.5" / 165mm Weather Protection Weatherproof motorcycle speaker construction Sold Pair Best Use for the Cicada CX65 The CX65 is best used in Harley-Davidson Touring and bagger audio systems where riders want a shallow 6.5" coaxial speaker upgrade with clean sound, simple fitment, and weatherproof construction for daily riding. Factory-Style Speaker Locations The CX65 is a strong option for 2014+ Harley-Davidson factory-style speaker locations. Always verify speaker depth, mounting diameter, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Fitment and Installation Notes The Cicada CX65 is intended for 2014+ Harley-Davidson fairing speaker locations and factory-style 6.5" motorcycle audio upgrades. Every installation should still be verified before ordering. Confirm mounting depth, mounting diameter, grille clearance, pod fitment, wiring path, impedance, and amplifier compatibility before installation. Some Road Glide, Street Glide, CVO, Indian, and custom bagger applications may require additional installation planning depending on factory parts, speaker pods, adapters, fairing layout, or final audio system design. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio CHX65 6.5" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX65 6.5" Pro Coax Horn Speakers Cicada Audio CHX65 6.5" Pro Coax Horn Speakers are built for Harley-Davidson bagger audio systems that need loud, clean, all-weather motorcycle sound at highway speed. Designed for high-output motorcycle audio, the CHX65 combines a 6.5" pro coaxial driver, horn-loaded clarity, Carbon Matrix Composite cone construction, and strong projection for riders who want more output from their Harley audio system. Shop Cicada Audio 6.5" Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD All-Weather 6.5" Cicada Speakers for Harley Audio Built for riders who want loud vocals, sharper clarity, stronger projection, and real motorcycle audio performance from a 6.5" Harley speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CHX65 6.5" Pro Coax Horn Speakers Current Part Numbers CHX65.2 = 2Ω version / CHX65.4 = 4Ω version Speaker Size 6.5" Speaker Type Pro coaxial horn speaker Best For Harley-Davidson bagger audio, fairing speaker upgrades, high-output motorcycle audio systems, and amplified 6.5" speaker locations System Goal Louder vocals, stronger projection, clean open-air output, all-weather durability, and better highway-speed performance Sold As Pair Always verify impedance, speaker location, mounting depth, amplifier power, wiring, crossover setup, and final fitment before ordering for your Harley-Davidson audio build. Built for Harley-Davidson Bagger Audio The Cicada CHX65 is made for riders who want more than a basic replacement speaker. It is built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and custom bagger audio systems that need louder output, cleaner vocals, better clarity, and strong projection in real riding conditions. With a horn-loaded design, all-weather protection, high-efficiency output, and motorcycle-focused construction, the CHX65 is a strong fit for amplified Harley audio systems where the speaker needs to perform at speed, not just sound good in the garage. All-Weather Pro Coax Horn Design The CHX65 uses Cicada’s all-weather design with a Nanofram horn cover, Carbon Matrix Composite cone, neodymium magnet structure, aluminum tweeter diaphragm, and external crossover network. This makes it a strong speaker choice for Harley riders who want loud, clear, reliable motorcycle audio in real-world riding conditions. The included horn cover helps protect the compression driver, while the pro coaxial layout gives the speaker the projection and efficiency needed for open-air Harley audio builds. Specifications Speaker Size 6.5" pro coaxial horn driver Impedance Options CHX65.2 = 2Ω / CHX65.4 = 4Ω Power Handling 300 watts RMS / 600 watts max Frequency Response 70Hz–20kHz +/-4dB Sensitivity 92dB, 1W / 1M Midbass Voice Coil 2.0" / 51mm high-temperature voice coil Tweeter Voice Coil 1.4" / 35.56mm tweeter voice coil Cone Carbon Matrix Composite™ cone Tweeter Dome Aluminum tweeter diaphragm Magnet Neodymium magnet structure Crossover External 12dB custom-tooled, vented, encased crossover Tweeter Attenuation -3dB / -6dB heat-sink encased resistor pack Horn Cover Nanofram™ horn cover Weather Protection Exclusive Cicada all-weather design for rain protection, waterproofing, and UV protection Mounting Depth 2.64" / 67mm Mounting Diameter 5.67" / 144mm Best Use for the Cicada CHX65 The CHX65 is best used in Harley-Davidson bagger audio systems where the goal is loud 6.5" speaker output, strong vocal projection, clean highs, and better performance from fairing or custom speaker locations. Amplified System Recommended These speakers are intended for serious motorcycle audio systems. For best results, match the CHX65 with proper amplifier power, correct impedance selection, clean wiring, and a real tuning plan. Fitment and Installation Notes The Cicada CHX65 is designed for 2014+ Harley-Davidson factory-designed speaker locations, but every motorcycle audio build should be verified before ordering. Confirm speaker depth, mounting diameter, pod clearance, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, and custom bagger applications may require installation planning, speaker pod work, adapter rings, or system tuning depending on the exact bike and audio layout. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CHX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Pro Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CHX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio HDPG4K 4 AWG Amp Power Kit
Vendor:Cicada AudioHDPG4K 4 AWG AMP POWER KIT Kit Includes 4 AWG H-D® Amplifier Power Kit 6ft Power/Ground with black over braid, terminated w/ ring terminals at the battery side, Ferrules on the amp side Remote trigger wire w/ H-D® plug for termination to remote trigger or plug into the H-D® harness Waterproof Mini ANL Fuse Holder w/60- and 100-amp fuses Need some distribution blocks?Sale -
SaleCicada Audio HDTSLINKAR-B 2014–2023 Harley Factory Radio T-Harness
Vendor:Cicada Audio2014–2023 HARLEY FACTORY RADIO INTEGRATION Cicada Audio HDTSLINKAR-B 2014–2023 Harley Factory Radio T-HarnessNo stock radio Flashing Required! Integrate a compatible four-channel aftermarket amplifier with the factory radio in a 2014–2023 Harley-Davidson Road Glide or Street Glide without cutting or splicing the motorcycle’s factory wiring. Removable RCA connectors support conventional aftermarket amplifiers, while the built-in four-position Molex connector provides a cleaner direct connection to Cicada Audio amplifiers. View Connection Options Verify Harley Fitment One Harness for Complete Audio Integration Fits compatible 2014–2023 Harley Touring motorcycles Road Glide and Street Glide applications Factory-amplified and non-amplified systems Basic through CVO Ultra factory audio systems Designed for four-channel amplifier integration Removable RCA output connectors Four-position Cicada amplifier Molex connector Balanced factory-radio audio signal Maestro AR ready Retains supported factory fade operation Retains supported handlebar audio controls No factory-wire cutting or splicing Updated Replacement for the Cicada HDTSLINKv2 The HDTSLINKAR-B replaces the previous HDTSLINK and HDTSLINKv2 factory-radio harness with a more flexible amplifier connection system. The updated removable RCA connections allow the harness to integrate with compatible four-channel amplifiers using conventional low-level RCA inputs. Installers using Cicada Audio amplifiers can instead use the built-in four-position Molex connector for a cleaner direct connection. This dual-connection design removes the old limitation that prevented the previous harness from connecting directly to certain amplifier platforms. Correct fitment: This updated harness is for 2014–2023 Harley-Davidson Road Glide and Street Glide motorcycles. It is not the correct A2B interface for 2023.5+ CVO or 2024+ Touring motorcycles. Harley-Davidson Fitment 2014–2023 Road Glide Supports compatible Road Glide factory-radio systems within the 2014–2023 Harley Touring platform. 2014–2023 Street Glide Supports compatible Street Glide factory-radio systems within the 2014–2023 Harley Touring platform. CVO and Ultra Systems Designed to support compatible basic, factory-amplified, non-amplified and CVO Ultra stereo configurations. Confirm the complete audio configuration: Verify the motorcycle year, exact model, factory radio, factory amplifier, fairing-speaker locations, rear-speaker locations and existing audio modifications before ordering. Two Amplifier Connection Options Removable RCA Outputs Use the removable RCA connectors to feed a compatible four-channel aftermarket amplifier with traditional low-level RCA inputs. Cicada Molex Connection Use the built-in four-position Molex connector for direct plug-in integration with compatible Cicada Audio amplifiers. Provides front and rear four-channel audio integration. Supports compatible fairing and rear-speaker configurations. Reduces unnecessary adapter harnesses and connection points. Maintains a cleaner factory-style installation. Allows the same primary harness to support multiple amplifier platforms. Amplifier input verification: Confirm the selected amplifier accepts the available RCA or Cicada Molex connection before beginning installation. Factory Radio and OEM Control Retention The HDTSLINKAR-B is designed to provide a clean audio signal from the original Harley-Davidson radio while avoiding unnecessary changes to the motorcycle’s factory CAN-bus wiring. Factory Fade Support Retains supported front-to-rear fade operation when the complete audio system is wired and configured correctly. Handlebar Controls Maintains supported factory handlebar audio adjustments through the original radio system. Factory EQ Integration Supports factory EQ operation and Maestro AR integration for systems requiring radio-EQ correction or flashing. Maestro AR Integration Cicada identifies the HDTSLINKAR-B as Maestro AR ready for compatible systems using ADS Maestro AR to flatten or flash factory radio EQ settings. Cicada’s current package listing states that Maestro and AR are included. Confirm the exact Maestro hardware and accessories contained in current inventory when receiving and fulfilling the product. Programming may still be required: Maestro-supported radio flashing, EQ correction and module configuration must be completed according to the requirements of the motorcycle, radio and final audio system. Multiple Harness Functions in One Assembly The HDTSLINKAR-B combines the functions that previously required several separate adapters, power taps and speaker harnesses. Front Signal Integration Provides the required front factory-radio signal path for a compatible aftermarket amplifier. Rear Signal Integration Supports rear audio signal routing for compatible saddlebag, lid or Tour-Pak speaker systems. Accessory Power Connection Replaces the need for a separate stealth accessory power-tap harness in supported installations. Rear Speaker Wiring Provides the rear speaker wiring path required for compatible bag or Tour-Pak audio configurations. Battery and Ground Tap Consolidates supported battery and ground integration functions within the primary installation package. Fairing Speaker Pod Adapters Replaces separate fairing-speaker pod plug adapters in supported factory speaker configurations. Recommended Audio-System Applications The HDTSLINKAR-B provides its most complete integration benefits in four-channel Harley Touring audio systems using both front fairing speakers and rear speakers. Fairing and Saddlebag Speakers Supports systems using front fairing speakers and compatible saddlebag-lid speakers. Fairing and Tour-Pak Speakers Supports compatible Ultra systems using front fairing and rear Tour-Pak speaker locations. Four-Channel Amplifier Systems Designed around the signal and speaker-routing requirements of a conventional four-channel amplifier installation. Installation and Ordering Notes Disconnect the motorcycle battery before beginning installation. Confirm 2014–2023 Road Glide or Street Glide fitment. Identify whether the motorcycle is factory amplified. Confirm all factory and aftermarket speaker locations. Verify the amplifier uses compatible RCA or Cicada Molex inputs. Route harness wiring away from sharp edges, heat and steering movement. Secure all unused connectors against vibration and moisture. Confirm left, right, front and rear channel assignments before final assembly. Set amplifier gain and crossover controls after signal integration. Test fade, balance and handlebar controls before reinstalling the fairing. Not for current A2B motorcycles: A compatible A2B interface is required for 2023.5+ CVO and 2024+ Harley Touring factory audio systems. Product Specifications Manufacturer Cicada Audio Current Manufacturer SKU HDTSLINKAR-B Replaces HDTSLINK and HDTSLINKv2 Product Type Factory-radio amplifier integration T-harness Vehicle Platform 2014–2023 Harley-Davidson Touring Primary Models Road Glide and Street Glide Factory Audio Systems Factory-amplified and non-amplified systems Aftermarket Amplifier Channels Four-channel integration Conventional Amplifier Connection Removable RCA outputs Cicada Amplifier Connection Built-in four-position Molex connector Maestro AR Support Maestro AR ready Factory-Wire Cutting Required No Shopify Variants None Related Motorcycle Audio Categories Amplifier Integration Motorcycle Amplifier Parts Motorcycle Amplifiers Motorcycle DSP and Signal Integration Complete the Harley System Motorcycle Speakers Cicada Audio Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada HDTSLINKAR-B FAQ What motorcycles does the HDTSLINKAR-B fit? It is designed for compatible 2014–2023 Harley-Davidson Road Glide and Street Glide factory-radio systems. Does it fit 2024 and newer Harley Touring motorcycles? No. The newest Harley Touring motorcycles use a different A2B factory-audio architecture and require an appropriate A2B interface. Does it work with factory-amplified motorcycles? Yes. Cicada designed the harness to support compatible factory-amplified and non-amplified 2014–2023 Harley systems. Can it connect to a non-Cicada amplifier? Yes. The removable RCA connectors support compatible four-channel aftermarket amplifiers using conventional RCA inputs. How does it connect to Cicada amplifiers? A built-in four-position Molex connector provides a direct plug-in path for compatible Cicada Audio amplifiers. Does it retain the factory fade control? It supports factory front-to-rear fade operation when the complete system is wired and configured correctly. Is it Maestro AR ready? Yes. Cicada identifies the HDTSLINKAR-B as Maestro AR ready for compatible factory-radio EQ flashing or correction. Does the installation require cutting factory wiring? No. The harness is designed as a plug-and-play integration solution without cutting or splicing the motorcycle’s factory wiring. Is an amplifier included? No. The aftermarket amplifier, power wiring, amplifier rack and additional system components are selected separately. Need Help Integrating a 2014–2023 Harley Factory Radio? Garage Bagger Stereo can help verify amplifier matching, mounting, power and speaker wiring, factory-radio signal integration and the correct RCA or Cicada Molex connection before installation. Installation Services Request a Custom BuildSale -
SaleCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair) All Weather 6x9 Pro Coaxial Driver A Weatherproof Horn Cover is included on the compression driver. SPECIFICATIONS: 4Ω – 6X9-inch PRO coaxial horn driver Power handling: 400W RMS/800W MAX each Voice Coil: 2.5-inch/64mm Mid-bass & 1.75-inch/44mm Tweeter High-temperature design Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 92dB, 1W / 1M response 46Hz – 20kHz +/- 3dB Mounting Depth: 3.75-inch/96mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Rain or Shine™ all-weather performance design Available in 4 or 2Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient 1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat External 12dB crossover with optional -3/-6 tweeter resistor attenuatorSale -
SaleCicada Audio CH69W 6x9" Pro Coaxial Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio CH69W Pro Coaxial Horn Speaker 6x9" (2Ω and 4Ω) FEATURES: Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Removable threaded horn ring for easy modification Rain or Shine™ all-weather performance design Available in 4- or 2-Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient External 12dB crossover with optional -3/-6 tweeter attenuator 4-inch OFC copper wire tweeter voice coils offer great sound while generating less heat Water-resistant treated paper cone Lightweight / rigid Maximized efficiency / super strong Black Coat™ 2-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance N35SH Neodymium magnet Die-cast Aluminum custom tooled basket with Vortex Flow Venting™ Warranty: 2 years SPECIFICATIONS: 4Ω – 6X9-inch coaxial horn driver Power handling: 250W RMS/500W MAX Voice Coil: 2.5-inch/64mm Mid-bass & 1.4-inch/36mm Tweeter Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: water resistant treated paper cone Magnet: Neodymium Sensitivity: 95dB Frequency response 75Hz – 20kHz +/- 3dB Mounting Depth: 3.7-inch/93mm Mounting Diameter: 6.6-inch/155mm X 9.3-inch/226mmSale -
SaleCicada Audio CHDLID 14+ HD Cut In Saddlebag Speaker Lid Kit
Vendor:Cicada AudioCicada Audio CHDLID Cut In Saddlebag Speaker Installation Kit for 2014-current Harley-Davidson® Touring Models 6″ x 9″ Saddlebag Lid Kit without speakers lets you add almost any speakers to your factory bag lids. Designed for select 2014 and newer Harley-Davidson® motorcycles with hard bags. HASSLE-FREE INSTALLATION The installer-friendly cutting guide and mounting arrangement means you can enjoy the more powerful sound without replacing the saddlebags or dealing with painting. Kit includes all hardware and integrated Cicda grills. Not compatible with models with electric locks. Adapters to Install 6”x9” Speaker to Stock Saddlebag Lid Saddlebag Lid Cut Template for Exact Fitment Included Black Speaker Grills w/ Premium Fit-n-Finish Included Speakers Not Included Designed for Cicada Audio Speakers Will work with other speakers but a spacer may be required Wiring Harness Not included Order wiring harness hereSale -
SaleCicada Audio CM65X 6.5" Mid-Bass Component Speakers with CMC Cones (Pair)
Vendor:Cicada AudioCicada Audio CM65X 6.5-inch Mid-Bass Component Speakers with CMC™ Cones FEATURES Designed exclusively for 2014 to current H-D® factory designed locations Rain or Shine™ all weather performance design OFC Copper shorting ring for extended high frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty SPECIFICATIONS 4Ω / 6.5-inch mid-bass driver Power Handling: 250W RMS / 500W MAX Voice Coil: 2-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 10 kHz +/- 3 dB Mounting Depth: 2.3-inch/58mm Mounting Diameter: 5.7-inch/144mmSale -
SaleCicada Audio CXX65 6.5" Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CXX65 6.5" Coaxial Speaker Pair Cicada Audio CXX65 6.5" Coaxial Speakers are built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and bagger audio systems that need clean full-range output, weatherproof performance, and strong 6.5" speaker upgrade potential. The CXX65 is a high-performance coaxial speaker designed for riders who want better clarity, improved efficiency, and reliable motorcycle audio performance in factory-style Harley speaker locations. Shop Cicada Audio 6.5" Coaxial Speakers Cicada Amplifiers THE REFERENCE STANDARD Weatherproof 6.5" Cicada Speakers for Harley Audio Built for riders who want clean sound, better clarity, strong efficiency, and reliable all-weather performance from a 6.5" Harley-Davidson motorcycle speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CXX65 6.5" Coaxial Speaker Pair Speaker Size 6.5" Speaker Type High-performance full-range pro coaxial motorcycle speaker Impedance Options 2Ω and 4Ω versions available depending on selected variant Best For Harley-Davidson Touring audio upgrades, factory-style 6.5" speaker locations, fairing speaker upgrades, and clean full-range motorcycle audio systems System Goal Clean output, better clarity, efficient performance, weatherproof durability, and improved Harley bagger audio Sold As Pair Always verify impedance, speaker location, mounting depth, grille clearance, amplifier compatibility, and final fitment before ordering for your Harley-Davidson audio build. Built for Harley-Davidson Touring Audio Upgrades The Cicada CXX65 is designed for riders who want a clean, efficient 6.5" coaxial speaker upgrade for Harley-Davidson motorcycle audio systems. It is a strong option for factory-designed Harley speaker locations where riders want better sound quality, weatherproof construction, and stronger output than a basic replacement speaker. With its low-profile design, all-weather performance, built-in crossover, V8™ Dispersion Guide, and efficient coaxial layout, the CXX65 is built to deliver clear sound in real motorcycle riding conditions. Weatherproof Full-Range Coaxial Design The CXX65 uses Cicada’s Rain or Shine™ all-weather performance design with moisture-resistant speaker materials, UV protection over all surfaces, a PEI tweeter dome, Kevlar cone construction, neodymium magnet structure, and a high-temperature resistant polycarbonate basket. The built-in 6dB crossover and V8™ Dispersion Guide help improve tweeter dispersion and speaker performance for motorcycle audio systems where sound needs to remain clear while the bike is moving. Specifications Speaker Size 6.5" coaxial speaker Power Handling 100 watts RMS / 200 watts max Frequency Response 55Hz–20kHz +/-3dB Sensitivity 93dB 1W/1M average, 2.83V Magnet Structure Neodymium high-energy lightweight magnet structure Cone Kevlar cone with moisture-resistant construction Surround NBR surround Frame / Basket High-temperature resistant polycarbonate custom-tooled basket Midbass Voice Coil 1.4" / 35mm voice coil Tweeter Voice Coil 1.0" / 25mm tweeter voice coil Tweeter Dome PEI tweeter dome Tweeter Design V8™ Dispersion Guide for 360-degree tweeter sound dispersion Horn / Dispersion Technology DPSH® Dual-Phase Slot Horn Crossover Built-in 6dB crossover Speaker Control Shorting ring design for improved speaker control Heat Control Advanced voice coil heat sink design for improved heat dissipation Mounting Depth 2.26" / 57.4mm Mounting Diameter 5.32" / 135.1mm Outside Dimensions 6.5" / 165mm Weather Protection Rain or Shine™ all-weather performance design with UV protection over all surfaces Included 5" grilles and hardware Warranty Two-year warranty Sold Pair Best Use for the Cicada CXX65 The CXX65 is best used in Harley-Davidson Touring and bagger audio systems where riders want a clean 6.5" coaxial speaker upgrade with strong clarity, efficient output, and weatherproof construction for daily riding. Factory-Style Speaker Locations The CXX65 is designed for 2014+ Harley-Davidson factory-designed speaker locations. Always verify mounting depth, speaker clearance, grille fitment, impedance, and amplifier compatibility before installation. Fitment and Installation Notes The Cicada CXX65 is designed for 1998+ Harley-Davidson factory-designed speaker locations, but every motorcycle audio build should be verified before ordering. Confirm speaker depth, mounting diameter, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, and custom bagger applications may require additional installation planning depending on the speaker location, factory parts, pods, adapters, and final audio system layout. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CXX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CXX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio RR1T 1" Ring Radiator Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio RR1T Motorcycle Compression Drivers and Horns The new Cicada Audio RR1T Ring radiator Tweeters are a perfect solution for 2014 and later baggers, Harley or otherwise. These speakers are relatively easy fit. And Shallow. But still may need “Custom” installation. Making them PERFECT for custom coaxial mounting “in-grill” as it has been very popular as of late. SPECS: 100WRMS/400 MAX Power Handling- PAIR Frequency Response: 2Hz -20Khz+/-5dB Neodymium High Energy/ Light Weight N35 Magnet structure Heavy Duty/ Die-cast Aluminum Basket 4 Ohm for increased durability V9 Phase Plug for increased Dispersion and Increased Sound Quality (a Cicada Exclusive!) 1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter Advanced Voice Coil Heat Sink Design for Better Heat Dissipation High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V) 12dB Crossover with custom tooled/ Vented crossover case Mounting Depth: 1.625” / 41.3mm (measured from back of “bezel” mounting ring) Mounting Diameter: 2” / 50mm SOLD ONLY IN PAIRSSale
Cicada Audio Video Overview
Cicada Audio Product Video
Cicada Audio Harley Build Video
Cicada Audio Motorcycle Speaker & Amplifier Paths
| Collection Focus | Cicada Audio motorcycle speakers, amplifiers, DSP, subwoofers, and Harley bagger audio upgrades |
| Primary Fitment | Harley-Davidson Touring, Road Glide, Street Glide, CVO, baggers, and custom motorcycle audio builds |
| Core Product Types | Cicada 6.5 speakers, 6x9 speakers, pro coaxial speakers, horn speakers, midbass, motorcycle amplifiers, DSP amplifiers, subwoofers, and audio accessories |
| Best For | Riders building louder Harley front-stage audio, stronger lid speaker output, DSP-controlled systems, amplified bagger audio, and complete Cicada motorcycle sound systems |
| System Goal | Loud, clean, controlled Harley audio with strong projection, better clarity, tighter bass, reliable fitment, and real highway-speed performance |
| Collection Depth | 105 Cicada Audio products |
Always verify speaker size, mounting depth, amplifier placement, wiring path, impedance, DSP needs, and total system design before ordering parts for your Harley audio build.
Cicada Audio Upgrades for Harley-Davidson Touring & Baggers
Cicada Audio has become a serious name in Harley-Davidson bagger audio because the lineup covers the parts riders actually need for louder, cleaner motorcycle sound. That includes Cicada 6.5 speakers, 6x9 speakers, pro coaxial speakers, horn-loaded speaker options, motorcycle amplifiers, DSP control, subwoofer products, and complete system paths that make sense for daily riders, touring bikes, and full custom bagger builds.
This collection is built for riders who want more than basic replacement speakers. If your goal is louder vocals, stronger front-stage attack, cleaner highway listening, more output from saddlebag lids, tighter bass, or a complete Harley Touring audio system, Cicada Audio gives you real options to build the bike correctly from the start.
Cicada 6.5 Motorcycle Speakers
Cicada 6.5 motorcycle speakers are a strong fit for Harley riders who want better clarity, louder front-stage output, and cleaner sound from fairing speaker locations. These speakers are built for open-air motorcycle audio where wind noise, road speed, and speaker efficiency matter.
Cicada 6x9 Speakers for Harley Audio
Cicada 6x9 speakers are popular for Harley bagger audio systems that need more output from saddlebag lid locations. When matched with the right amplifier power and tuning, 6x9 upgrades can help build a larger, louder, more complete sound stage behind the rider.
Cicada Pro Coaxial Speakers and Midbass
Cicada pro coaxial speakers and midbass options are built for riders who want aggressive output, stronger projection, and more authority at highway speed. These products are aimed at motorcycle audio builds where the system needs to cut through wind, road noise, helmets, and open-road conditions.
Cicada Amplifiers, DSP, and System Control
Great Harley audio is not just about louder speakers. It is about clean power, signal control, crossover points, output level, and system balance. Cicada amplifiers and DSP-ready upgrade paths help riders build smarter systems with better control across speakers, subwoofers, and plug-and-play Harley layouts.
Best Cicada Audio Upgrade Paths for Harley Riders
The right Cicada system depends on the bike, factory radio platform, speaker locations, amplifier power, DSP plan, and final sound goal. Some riders need a clean plug-and-play Harley speaker upgrade. Others need more amplifier power, louder pro coaxials, stronger 6x9 lid output, or full bass support. These related collections help you move directly into the right path.
- Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds
- Shop pro coaxial motorcycle speakers for louder Harley bagger audio
- Shop motorcycle coaxial speakers for Harley Touring systems
- Shop plug-and-play DSP upgrades for Harley-Davidson audio tuning
- Shop plug-and-play amplifiers for Harley bagger audio systems
- See 2014–2023 Harley plug-and-play audio kits
- See 2023.5+ Harley-Davidson plug-and-play audio kits
Why Cicada Audio Works So Well on Harley Baggers
Harley-Davidson audio builds are limited by space, wind noise, vibration, electrical realities, speaker placement, and the need for parts that can actually work together. Cicada Audio stands out because the product line supports real motorcycle installation logic. You can build around loud front-stage speaker upgrades, compact amplifier power, DSP-driven tuning, 6x9 lid output, or more advanced bass systems without losing sight of fitment and system efficiency.
For riders chasing louder and cleaner sound on a touring bike, that matters. The right Cicada setup can give you sharper projection, stronger dynamics, better control, and a more complete listening experience that still makes sense on the bike instead of only sounding good on a spec sheet.
Why Buy Cicada Audio from Garage Bagger Stereo?
Garage Bagger Stereo builds around what works in the real world. This Cicada Audio collection is not just a brand listing. It is a Harley-focused motorcycle audio path built around products that support bagger audio installs with the right balance of power, projection, tuning, fitment, and installation practicality.
If you are trying to decide between Cicada 6.5 speakers, Cicada 6x9 speakers, pro coaxial upgrades, amplifier power, plug-and-play Harley kits, DSP tuning, subwoofer support, or a more complete Cicada bagger audio system, this collection gives you a stronger place to start and a better way to build the bike correctly the first time.
Need Help Choosing Cicada Audio for Your Harley?
Need help choosing the right Cicada Audio speakers, amplifier, DSP, subwoofer, plug-and-play kit, or Harley bagger audio path? Call Garage Bagger Stereo or start a build consultation and we’ll help match your bike, radio, speaker locations, amplifier power, tuning plan, and final sound goal to the right Cicada motorcycle audio setup.