Browse Collections
-
SaleCerwin-Vega 23.5+ Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 23.5+ 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Wiring harness included Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment 23.5-Current Street Glide and Road Glide, including CVO ST Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 2023.5 and Newer Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley. Compatibility with Harley Davidson Motorcycles This cut-in lid kit is compatible with a variety of Harley Davidson models, including: Street Glide Road Glide The fitment range extends from 2023.5 to the current model year, ensuring you can enjoy enhanced audio regardless of your bike's vintage.Sale -
SaleCerwin-Vega 98-13 Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 98-13 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Plug-and-play wiring harness Recommended For Extra Protection FSWPG69 Water Repelling Grill Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment Harley Davidson® 1998-2013 models Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 1998-2013 Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley.Sale -
SaleCerwin‑Vega 2014-2023 Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin Vega Harley 6x9 Multi Speaker Lid Kits The Cerwin Vega Harley 6x9 Lid Kits – Multi Speaker configuration is designed for riders building high-output rear audio systems on Harley Davidson touring motorcycles. These saddlebag lid kits provide the structural support and internal geometry required to mount multiple 6x9 speakers per lid while maintaining proper fitment and durability. Shop Harley Speaker Lids Shop Motorcycle Amplifiers Shop Motorcycle DSP Processors THE REFERENCE STANDARD Build It Right the First Time Not sure what fits your exact year and saddlebag setup? Start with a clean, correct plan. Start a Build Consultation Call 864-334-6131 Key Specifications Fitment 2014–2023 Harley Davidson® touring saddlebags Kit Type Cut In Saddlebag Lid Kit Speaker Configuration Multi 6x9 Speaker Layout Speaker Model ST692CX2 (2Ω or 4Ω) Power Handling 125W RMS – 250W RMS Included Components 2 lid kit grills w/Cerwin-Vega logo, 2 pre-cut templates (right & left), 2 - .5" speaker ring spacer, speaker wire harness Specs summarized from manufacturer technical data. Always verify fitment, impedance, and wiring before installation. Built for High-Output Rear Audio Systems Unlike single-speaker lid solutions, multi-speaker lid kits allow increased cone area and improved rear sound pressure when paired with adequate amplification. This makes them ideal for full front-and-rear systems where rear output must keep pace with high-powered fairing speakers. These lid kits are engineered specifically for Harley touring saddlebags and are designed to integrate cleanly with aftermarket amplifiers and DSP-controlled systems. Reinforced mounting zones minimize flex, while proper speaker spacing ensures consistent output and long-term reliability. Key Features Multi-speaker 6x9 configuration per saddlebag lid Harley touring-specific fitment Reinforced construction for high-output applications Designed for use with dedicated rear-channel amplification Amplification and Tuning Requirements Proper amplification and tuning are required to realize the full performance of multi-speaker lid systems. These kits are best paired with 4-channel or multi-channel amplifiers and DSP processors to manage level control, crossover points, and system balance. This product is intended for serious bagger audio builds where rear speaker performance is not an afterthought, but an integrated part of the overall system design. Build Links Motorcycle Amplifiers Motorcycle DSP Processors Motorcycle Speaker Installation Parts Harley Speaker LidsSale -
SaleCicada Audio 14CHDLID8 8" 2014-2023 HD LID KIT
Vendor:Cicada AudioCicada Audio 14CHDLID8 Cicada Audio Harley Davidson 8" Speaker Lids Fitted for 2014-2023 Models 14CHDLID8 H-D® 2014-2023 8-inch Lid Kit Vivid Black Finish 8-inch Speaker Hard Dividers 8-inch Billet Grill Kit (included) Works with CH, CM, CHX / Power coated metal grill / Billet Aluminum ring Included lid gaskets Installation GuideSale -
Sale
Cicada Audio 14CHDLID8R 8" 2014-2023 HD LID KIT (Raw)
Vendor:Cicada AudioCicada Audio 14CHDLID8R Cicada Audio Harley Davidson (Raw Finish) 8" Speaker Lids Fitted for 2014-2023 Models 14CHDLID8R H-D® 2014-2023 8-inch Lid Kit Raw Finish 8-inch Speaker Hard Dividers 8-inch Billet Grill Kit (included) Works with CH, CM, CHX / Power coated metal grill / Billet Aluminum ring Included lid gaskets Installation GuideSale -
SaleCicada Audio 2014-2023 H-D® 6X9" Saddlebag Lid Kit
Vendor:Cicada AudioSaddlebag Lids — 6×9″ Cicada Audio 14HDLID69 — 6×9″ Saddlebag Lid Kit for Harley (2014–2023) Turn your touring bike’s lids into real front-row seats. The Cicada Audio 14HDLID69 swaps stock lids for Vivid Black saddlebag lids built to house 6×9″ speakers (sold separately). You get pre-cut damping, stainless hardware, branded hinges and lid covers, and a rear Molex® extension harness for a cleaner, faster install — all designed for 2014–2023 Harley-Davidson® touring platforms. Sold in pairs. Why Riders Choose It Instant 6×9″ upgrade — step up from stock openings for real output. Vivid Black lids — bolt on now, paint later if you want. Cleaner install — damping mat pre-cut for the lids. Built to last — stainless fasteners + OEM-style components. Harley-specific — all parts matched for ’14–’23 touring bags. Shop Saddlebag Lids Best With Cicada 6×9″ speakers (CHX/CXX/CX/CXK series) Quality amp power with proper OFC wiring & fusing Bag-lid grills/dividers for weather and airflow control Our pre-wired Molex® harness solutions for quick connects Need a parts list for your year/model? Call us at (864) 334-6131 — we’ll match speakers, amps, wiring and grills to these lids. Key Specifications Fitment Harley-Davidson® Touring (2014–2023) Speaker Size 6×9″ speakers (sold separately) Finish Vivid Black (unpainted optional) Damping Pre-cut damping mat included Hardware Stainless steel hardware included Included Components HDROM rear Molex® output extension harness; CHDJS branded crossover lid hinges; CHDLCv2 branded lid covers Sold In pairs SKU 14HDLID69 Always test-fit before paint. Confirm speaker depth, grille choice, and wire routing with your specific amplifier setup. Frequently Asked Questions — Motorcycle Audio Do these include speakers? No — speakers are sold separately. We’ll recommend 2Ω or 4Ω models based on your amp power and tuning goals. Are grills and dividers included? Grilles/dividers are typically separate. Ask us for Cicada matched grills and silicone dividers to keep weather out and mid-bass controlled. Will they fit CVO or electric-lock bags? These lids are designed for standard ’14–’23 H-D touring bags. For CVO/electric lock setups, contact us for compatibility and alternatives. What amps work best with 6×9″ lids? Most builds run 150–300W RMS per channel with proper HPF settings. We’ll spec amps and crossovers to keep things clean and loud at highway speeds. Garage Bagger Stereo Advantage Bike-specific fitment help for 2014–2023 touring platforms Clean, serviceable OFC wiring with correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and phone support Non-Returnable Item Need Help? Call us at (864) 334-6131 with your bike year/model and speaker/amp plan. We’ll map the right drivers, power, and wiring for these lids.Sale -
Cicada Audio 24CHD69TB — 6×9″ Tweeter Bridge for 2024+ H‑D (Pair)
Vendor:Cicada AudioCicada 6×9 Tweeter Bridge – 2024+ Harley Integrated tweeter mounting solution for Cicada 6×9 rear saddlebag audio systems View Tweeter Bridge 2024+ Harley Speaker Lids Build Consultation THE REFERENCE STANDARD Build It Right the First Time Supporting line goes here. (Same font size as eyebrow) Start a Build Consultation Call 864-334-6131 Key Specifications Product Type 6×9 Tweeter Bridge Application 2024+ Harley-Davidson® Touring Motorcycles Compatibility Cicada 6×9 saddlebag lid systems; Cicada hard divider; Cicada 2024+ rear audio configurations Mounting Location Saddlebag lid (6×9 configuration) Sold As Pair Design Purpose Secure tweeter mounting and correct high-frequency positioning Specs summarized from manufacturer technical data. Always verify fitment and compatibility before installation. Product Overview The Cicada 24CHD69TB 6×9 Tweeter Bridge is engineered specifically for 2024+ Harley-Davidson® touring saddlebag lids using Cicada 6×9 rear speaker systems. This bridge allows proper tweeter integration within the 6×9 lid configuration while maintaining structural integrity and correct acoustic alignment. Designed for use with Cicada 2024+ Harley saddlebag lid kits, the tweeter bridge ensures accurate high-frequency positioning and secure mounting. Proper tweeter placement is critical in high-output rear audio systems, especially when balancing amplified front and rear stages in touring builds. Constructed for durability and long-term use in touring environments, the bridge integrates cleanly with compatible Cicada components including hard dividers and rear mid-bass configurations. Sold as a pair. Designed specifically for 2024+ Harley touring models with compatible Cicada 6×9 lid systems. Important Notes • Designed specifically for 2024+ Harley touring models• Intended for use with compatible Cicada 6×9 lid systems• Tweeters and speakers sold separately• Professional installation recommended -
SaleCicada Audio 24CHDCVOLG OEM-Style Rear Saddlebag Lid Grilles for 2024+ Harley-Davidson – Pair
Vendor:Cicada Audio2024+ HARLEY REAR SADDLEBAG AUDIO Cicada Audio 24CHDCVOLG OEM-Style Rear Saddlebag Lid Grilles for 2024+ Harley-Davidson The Cicada Audio 24CHDCVOLG kit includes a pair of Cicada-branded OEM-style aluminum speaker grilles designed for compatible rear saddlebag lids on 2024 and newer Harley-Davidson motorcycles. They provide a clean factory-inspired appearance while protecting the rear speakers in your motorcycle audio system. What’s Included View Product Details OEM-Style Saddlebag Finish Designed for compatible 2024+ Harley-Davidson rear saddlebag lids Sold as a matching left and right pair Durable aluminum construction Factory-inspired grille design Cicada Audio branded appearance Designed for rear saddlebag audio systems Grilles only—speakers and lids are not included Cicada 24CHDCVOLG Grille Kit Overview The Cicada Audio 24CHDCVOLG grille kit is designed to complete a rear saddlebag speaker installation on compatible 2024 and newer Harley-Davidson motorcycles. Each grille features a clean OEM-style shape that integrates with the rear saddlebag lid while adding visible Cicada Audio branding. The aluminum construction provides a durable barrier over the speaker opening without giving the installation an oversized aftermarket look. This is an appearance and speaker-protection component only. It does not include speakers, saddlebag lids, speaker adapters, wiring or installation hardware unless separately stated in the product options. What Comes in the Kit One left rear saddlebag lid speaker grille One right rear saddlebag lid speaker grille Cicada Audio branded OEM-style design Durable aluminum grille construction Grilles only: Speakers, saddlebag lids, cut-in templates, mounting rings, wiring and complete speaker installation kits are not included. Why Riders Choose These Grilles 2024+ Harley Fitment Designed for compatible rear saddlebag speaker lid applications on 2024 and newer Harley-Davidson motorcycles. OEM-Style Appearance The factory-inspired design provides a clean integrated appearance instead of an oversized universal speaker grille. Aluminum Construction Durable aluminum provides long-lasting speaker protection and resistance to normal motorcycle riding conditions. Cicada Audio Branding Visible Cicada Audio branding gives the rear audio installation a complete, professionally matched appearance. Sold as a Pair The kit includes matching left and right grilles for both rear saddlebag speaker locations. Rear Speaker Protection The grille structure helps protect the speaker cone from contact, debris and normal use around the saddlebag lid. Designed for a Complete Rear Audio Installation The 24CHDCVOLG grilles are an ideal finishing component for Harley-Davidson rear saddlebag audio systems using compatible speaker lids and Cicada Audio rear speakers. Maintains a clean factory-inspired saddlebag appearance Provides visible protection over the rear speaker opening Complements Cicada Audio rear component and coaxial speaker systems Matches left and right saddlebag speaker locations Supports custom and plug-and-play Harley audio upgrades Product Details Brand Cicada Audio Model / SKU 24CHDCVOLG Product Type Rear saddlebag lid speaker grilles Vehicle Application Compatible 2024 and newer Harley-Davidson motorcycles Installation Location Rear saddlebag speaker lids Construction Aluminum Design OEM-style with Cicada Audio branding Quantity Pair—one left and one right grille Speakers Included No Saddlebag Lids Included No Fitment and Ordering Notes Verify fitment: These grilles are designed for compatible rear saddlebag speaker lid applications on 2024 and newer Harley-Davidson motorcycles. Confirm your exact year, model, factory audio package and saddlebag lid configuration before ordering. This listing includes the left and right grilles only. Rear speakers are not included. Saddlebag lids are not included. Speaker mounting rings and adapters are not included. Confirm that your saddlebag lids accept this OEM-style grille design. Verify all speaker and grille clearances before final installation. Professional installation is recommended when modifying saddlebag lids. Best For 2024+ Harley-Davidson rear saddlebag audio upgrades Replacing missing or damaged rear speaker grilles Completing a Cicada Audio rear speaker installation Custom saddlebag speaker lid builds Riders wanting an OEM-style rear speaker appearance Road Glide and Street Glide rear audio systems with compatible lids Related Motorcycle Audio Categories Cicada and Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Speaker Lids and Installation Motorcycle Speaker Lids Motorcycle Speaker Installation Parts Motorcycle Amplifier Installation Parts Installation Support Motorcycle Amplifiers Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada 24CHDCVOLG FAQ What motorcycles are these grilles designed for? They are designed for compatible rear saddlebag speaker lid applications on 2024 and newer Harley-Davidson motorcycles. Exact fitment should be confirmed before ordering. Are the grilles sold individually or as a pair? The 24CHDCVOLG kit is sold as a pair and includes one left and one right rear saddlebag lid grille. Are speakers included? No. This listing includes the Cicada Audio branded grilles only. Speakers must be purchased separately. Are saddlebag lids included? No. The rear saddlebag lids are not included. What are the grilles made from? Cicada Audio specifies durable aluminum construction for long-lasting performance and resistance to normal riding conditions. Do these grilles fit every 2024+ Harley-Davidson? Fitment depends on the motorcycle model, factory audio package and saddlebag lid configuration. Confirm compatibility before ordering. Can these be used with Cicada Audio rear speaker kits? Yes. They are designed as an OEM-style finishing component for compatible rear saddlebag audio systems, including Cicada Audio speaker upgrades. Need Help Confirming Saddlebag Grille Fitment? Call Garage Bagger Stereo with your Harley-Davidson year, model, factory audio package, saddlebag lid configuration and rear speaker setup. We’ll help confirm whether the Cicada 24CHDCVOLG grilles are correct for your bike. Call 864-334-6131 Ask GBS for HelpSale -
SaleCicada Audio 24CHDLID 2024+ H‑D Saddlebag Lid 6×9 Cut‑In Kit
Vendor:Cicada Audio2024+ Harley-Davidson® 6×9 Saddlebag Lid Mounting Kit Cut-in mounting system engineered for the updated 2024+ Harley touring saddlebags View Mounting Kit Motorcycle Speaker Lids Build Consultation THE REFERENCE STANDARD Cut-In. Clamp. Seal. Angled baffle projection, waterproof sealing, and a secure top-load clamp system for real touring use. Start a Build Consultation Call 864-334-6131 Key Specifications Product Type Saddlebag Lid Cut-In Speaker Mounting Kit Application 2024+ Harley-Davidson® Touring Saddlebags (updated design) Speaker Size Supported 6×9 inch Mounting Method Cut-in, top-load baffle with clamping ring Baffle Design Angled baffle for rider-focused projection Construction Materials High-strength ASA plastic + powder-coated steel mesh grille Weather Protection Waterproof gasket system + updated lid gasket seals + rainproof lid covers Notes Speakers not included Specs summarized from manufacturer technical data. Verify fitment and follow the installation guide for proper sealing and long-term reliability. Engineered for the 2024+ Harley Touring Saddlebag Update The 2024+ Harley-Davidson® Saddlebag Lid 6×9″ Cut-In Mounting Kit is engineered specifically for the updated 2024-present Harley touring saddlebags. This kit provides a secure, weather-resistant solution for mounting full-size 6×9 speakers directly into factory saddlebag lids, featuring a precision-cut-in design. Unlike surface-mount or retrofit adapters, this system uses a unique top-load speaker baffle with a dedicated clamping ring and waterproof gasket. The three-part assembly locks the speaker securely in place while maintaining proper lid sealing and structural integrity. An optimized baffle angle projects sound upward and forward toward the rider, improving on-road clarity at speed. This design is intended for real-world touring use where rear speaker placement and projection angle directly affect audibility and system balance. The kit is constructed from high-strength, UV-resistant ASA plastic and finished with a heavy-duty powder-coated steel mesh grille. Updated gasket seals and improved waterproofing allow the use of full-depth, high-output 6×9 speakers without compromising durability or saddlebag function. This mounting kit is compatible with 2024+ Harley touring models equipped with electric-lock saddlebags and supports advanced rear-audio systems when paired with appropriate amplification and tuning. Speakers are not included. Fitment verification and adherence to the installation guide are required. Full Product Specifications Product Type Saddlebag Lid Cut-In Speaker Mounting Kit Application 2024+ Harley-Davidson® Touring Saddlebags (updated design) Speaker Size Supported 6×9 inch Mounting Method Cut-in, top-load baffle with clamping ring Baffle Design Angled baffle for rider-focused projection Construction Materials High-strength ASA plastic; heavy-duty powder-coated steel mesh grille Weather Protection Waterproof gasket system; updated lid gasket seals; rainproof lid covers included Compatibility Cicada 6×9 speakers; Cicada hard divider; Cicada tweeter bridge; Cicada 24RING10; Cicada 24PORT3; Cicada 8″ and 10″ mid-bass drivers; electric-lock saddlebags What’s Included • Speaker grilles and angled baffles • Clamping rings with gaskets • ABS cutout templates • Updated lid gasket seals • Rainproof lid covers • Cicada tethers with crossover pouch • Die-cut speaker gasketing Important Notes • Speakers not included • Verify fitment before installation • Follow the provided installation guide • Designed for full-size, full-depth 6×9 speakersSale -
SaleCicada Audio CBG8MT 8" Flush Style Billet Grilles w/ RR075T Tweeter Mount
Vendor:Cicada AudioCicada Audio CBG8MT 8-INCH FLUSH STYLE BILLET GRILLES w/ RR075T- Tweeter Mount (Pair) Cicada Audio® Branded Aluminum Grilles (w/ RR05T Mounts) Description: 8″ Cicada Audio® Branded Aluminum Grilles (w/ RR075T Mounts)Description:This is a premium 8″ custom grille set from Cicada Audio®, engineered for riders who demand both exceptional sound and standout style. CNC-Machined from solid aluminum, these grilles are built to exacting standards for a precise fit and long-lasting durability. Designed with a flush-mount profile, they provide a clean, integrated look when installed—no bulky protrusions or awkward fitment. Features a dedicated tweeter mount specifically engineered for the RR075T Micro Horn Tweeter, allowing for seamless integration and optimal audio performance. Coated with a rugged black powder-coated finish to resist wear, corrosion, and road grime—while complementing any bike’s aesthetics. Sold in pairs, ready to install with no guesswork. Perfect for high-performance Harley-Davidson audio upgrades, the CBG8MT grilles offer the quality and branding you expect from Cicada Audio®, delivering both visual impact and professional-grade functionality.Sale -
SaleCicada Audio CHD69HD 6X9″ Plastic Dividers for Saddle Bags (Pair)
Vendor:Cicada AudioCicada Audio CHD69HD 6X9″ Plastic Dividers for Saddle Bags CHD69HD CH/CHX series 6X9″ Plastic Dividers for Saddle Bags to be used with 8″ or 10″ Pro Midbass DriversSale -
SaleCicada Audio CHD69SD 6X9″ Silicone Dividers for Saddle Bags (Pair)
Vendor:Cicada AudioCicada Audio CHD69SD 6X9″ Silicone Dividers for Saddle Bags 6 x 9″ Silicone Bag Divider use w/ only 8″ Mid-bass Drivers. Use this divider to keep your 6 x 9″ coax or horn coax from becoming a passive radiator to the mid-bass woofer.Sale
