Browse Collections
-
SaleCerwin-Vega PH694 6x9" Pro Full-Range Coaxial Horn Speakers
Vendor:Cerwin-VegaCerwin-Vega 6x9" Pro Full-Range Coax Horn Speakers PH694 The Cerwin-Vega PH694 6x9" Pro Series horn-loaded coaxial speakers deliver powerful output, sharp high-frequency projection, and strong midbass for motorcycles and high-SPL mobile audio systems. Featuring a treated paper cone, compression horn tweeter, and rugged steel basket, the PH694 provides clear, high-efficiency sound that cuts through road and wind noise while maintaining durability under heavy use. Specifications: Speaker Type: 2-Way Full-Range Coaxial Horn SpeakerSize: 6" x 9"Power Handling (RMS): 160 wattsPower Handling (Peak): 320 wattsImpedance: 4 ohm (Single Voice Coil)Sensitivity: 101 dB (High-efficiency SPL output)Frequency Response: 80 Hz – 18,000 HzMidrange Cone Material: Treated paperTweeter Type: Horn-loaded compression driverTweeter Diaphragm: PolyimideSurround Material: Treated clothFrame/Basket: Stamped steelMagnet Type: Ferrite (Ceramic)Crossover: Internal passive networkBi-Amp Capable: YesMounting Depth: 3.9 in (approx.)Cutout Dimensions: 8.74 in x 5.98 inRecommended Use Cases:– Motorcycle audio– Powersports / side-by-side– High-SPL car audio– Outdoor/open-air vehicles– Demo builds and competition systemsSale -
SaleCerwin-Vega SM69F4 RPM Stroker Marine 6x9" 2-Way Speakers
Vendor:Cerwin-VegaCerwin-Vega RPM Stroker Marine 6x9" 2- Way Speakers SM69F4 Built on a cast aluminum basket with IPX5 water resistance, UV-stable waterproof composite cone, and integrated RGB LED lighting, they are engineered for harsh marine and powersports environments while maintaining clean highs, strong midbass, and long-term durability. Key Specifications: Speaker size: 6x9 in Speaker type: 2-way coaxial Impedance: 4 ohm (single voice coil) Cone material: polypropylene Diaphragm material: titanium Basket material: cast aluminium Magnet type: ferrite (ceramic) Surround material: treated cloth Crossover: internal Water resistance: IPX5 Frequency response: 80Hz–20kHz Voice coil diameter: 1.5 in (38mm) Sensitivity (1W/1m): 93dB Xmax: 4mm Power handling (RMS): 150W Power handling (MAX): 300W Mounting diameter: 8.64 x 6 in (219.5 x 152.5mm).Sale -
SaleCerwin-Vega ST69CX Stroker 6x9" 2-Way Coax Speakers
Vendor:Cerwin-VegaCerwin-Vega Stroker 6x9" 2-Way Coax Speakers (2Ω or 4Ω) ST69CX Featuring a polypropylene cone, titanium dome tweeter, cast aluminum basket, and IPX5-rated construction, this 4-ohm component-style coax set delivers deep midbass, crisp highs, and high SPL performance, making it ideal for aggressive builds, show vehicles, and serious daily drivers. Key Specifications Speaker size: 6x9 in Speaker type: component/coax set Bi-ampable: yes Impedance: 4 ohm (single voice coil) Cone material: polypropylene Diaphragm material: titanium Basket material: cast aluminium Magnet type: woofer ferrite / tweeter neodymium Surround material: Santoprene Crossover: internal Water resistance: IPX5 Frequency response: 45Hz–20kHz Voice coil diameter: 1.5 in (38mm) Sensitivity (1W/1m): 90.5dB Vas: 4.5L Xmax: 39mm (1.6 in) Power handling (RMS): 125W Power handling (MAX): 500W Mounting depth: 4.25 in (107.9mm) Mounting diameter: 8.8 x 9.5 in (225.5 x 241.3mm).Sale -
SaleCicada Audio CX69 6x9" Coaxial Speaker (Pair)
Vendor:Cicada Audio6x9" 2Ω or 4Ω High Performance Full-Range Coaxial Speaker The new Cicada Audio CX69.2 speakers are a perfect solution for 2014 and later Harley Fairings. These 6x9 2 or 4 ohm 2-Way Coaxial waterproof speakers are shallow, an easy fit, and do not require an additional tweeter location on the fairing. They simply bolt into the factory speaker locations. Available in 4Ω or 2Ω …the 2Ω get more output with smaller higher efficiency / lower output amplifiers and don’t NEED a giant “current hog” for an amplifier to drive these. Specs: 125WRMS/250MAX Power Handling- EACH Frequency Response: 53Hz -20Khz+/-5dB Neodymium High Energy/ Light Weight N35 Magnet structure Waterproof IMPP Cone with NBR surrounds Heavy Duty/ Injected High-Temp Polymer Frame. 1.4” 2Ω or 4Ω – High Temp Voice Coil (Black Coat™) Voice Coil MidBass Shortening Ring for the Ultimate in Speaker Control 1.0” PEI dome tweeter with Neodymium magnet DPSH ® “Dual-Phase Slot Horn” Advanced Voice Coil Heat Sink Design for Better Heat Dissipation High Sensitivity: 934dB 1W/1M Average (1W/1M – 2.83V) Built in 6dB Crossover Low Profile Design / Easy Fit Mounting Depth: 2.55” / 64.8mm Mounting Diameter: 5.77” X 8.5” / 145.5mm X 215.9mm Outside Dimensions: 6.4” X 9.2” / 126.56mm X 233.7mm SOLD IN PAIRS Weather treatedSale -
SaleCicada Audio CXX57 5x7" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CXX57 High-Performance Full-Range 5×7-inch Pro Coaxial (2Ω or 4Ω) New to our mid-line series, the CXX57.2 is a drop-in replacement 5″ x 7″ bag lid speaker featuring a 1.4″, 2Ω, voice coil woofer and a 1″ PEI, 4Ω, tweeter. This model can be operated as a coaxial or is bi-ampable for a direct replacement on the Boom 2 system FEATURES: Designed for 1998 to 2023 H-D® factory designed locations Power handling: 125W RMS/250W MAX V8™ Dispersion Guide Exclusive Cicada Design for 360o sound from tweeter N45H Neo Magnets All weather design for Rain or Shine™ Bi-Amp ready for OEM Hook up for H-D® Boom 2® System Switchable built-In 6dB crossover Available in 4- or 2-Ohm versions PEI – (High temp polymer dome) tweeter diaphragm material Brighter sound More efficient Moisture resistant Kevlar cone Extremely light / rigid / moisture resistant Maximized efficiency Hi-Temperature Polycarbonate custom tooled basket All surfaces have UV protection Warranty: 2 yearsSale -
SaleCicada Audio CXX69 6x9" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CXX69 High-Performance Full-Range 6x9" Pro Coaxial Speakers SPECS: 4Ω and 2Ω / 6X9-inch high performance coaxial driver Power handling: 200W RMS/400W MAX Voice Coils: 2.0-inch/49mm Mid-bass and 1.2-inch/31mm Tweeter Cone: Kevlar Tweeter Dome: PEI Magnet: Neodymium Sensitivity: 93dB Frequency response 50 Hz– 20 kHz +/- 3dB Mounting Depth: 2.7-inch/69mm Mounting Diameter: 6.4-inch/163mm X 9.2-inch/234mm FEATURES: V8™ Dispersion Guide Exclusive Cicada Design for 360o sound from tweeter Rain or Shine™ all-weather performance design Built-in 6dB crossover Available in 4- or 2-Ohm versions PEI tweeter dome for best sound dispersion Moisture resistant Brighter sound More efficiency Kevlar cone Extremely lightweight and strong Moisture resistant Maximized efficiency Copper wire voice coils offer great sound while generating less heat N45H Neo Magnets High-temperature resistant Polycarbonate custom tooled basket UV protection over all surfaces Two (2) year warrantySale -
SaleDB Drive Euphoria Xpert EX69NPS-CF 6×9" 2-Way NEO Carbon Fiber Point Source Loudspeaker
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. EX69NPS-CF 6×9" 2-Way NEO Carbon Fiber Point Source Loudspeaker Featuring a high-intensity NEO ring magnet and an IP65-rated weather-resistant carbon fiber cone, this speaker is built to withstand the elements and deliver top-notch performance. Features: 1.5″ (38.1mm) Midrange voice coil High-intensity NEO ring magnet IP65 rated weather resistant Carbon fiber cone Cloth surround Stamped steel basket Wide dispersion 1″ aluminum dome tweeter Protective grill Specs: Resonant Frequency (fs): 68.8Hz D.C. Voice Coil Resistance: (Re) Nominal Impedance: 4Ω Power Handling: 400 Watts Dynamic Wattage: 800 Watts Sensitivity (1w/1m): 92dB Frequency Response: 77Hz-19KHzSale -
DB Drive EX57NPS-CF 5×7" NEO Carbon Fiber Point Source Loudspeaker
Vendor:DB DriveDB Drive EX57NPS-CF 5"×7" NEO Carbon Fiber Point Source Loudspeaker EX57NPS‑CF is a 5x7" NEO carbon fiber point source speaker with a wide‑dispersion 1" aluminum dome tweeter, IP65 carbon fiber cone, and treated cloth surround. High‑intensity NEO ring magnet and 1.5" voice coil. Power handling: 225W (450W dynamic) Sensitivity: 93.3dB (1W/1m) Frequency response: 81Hz–19kHz Nominal impedance: 4Ω Protective grill included -
SaleDB Drive Xpert Speakers EX69NCX
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. Specifications 6″x9″ 2-Way Loudspeaker 1.5″ (38.1mm) Midrange Voice Coil 10 Neodymium Ring Magnet Assembly IP52 Rated Weather Resistant Paper Cone with Cloth Surround Die-Cast Aluminum Basket with Radial Venting Wide Dispersion 1.25″ (28mm) Aluminum Dome Tweeter Resonant Freq 92.1Hz D.C Coils 3.2Ω Impedance 4Ω Power Handling 400 watts Dynamic wattage 800 Sensitivity 96.5 dB Depth 3.31"Sale -
SaleDiamond Audio HXM57F2BK 5×7 Harley Direct Replacement Speakers | 2Ω – Pair
Vendor:Diamond AudioHARLEY-DAVIDSON 5×7 DIRECT-REPLACEMENT SPEAKERS Diamond Audio HXM57F2BK 5×7 Harley Direct Replacement Speakers Upgrade a compatible Harley-Davidson factory 5×7-inch speaker location with the Diamond Audio HXM57F2BK high-output two-way coaxial speaker pair. The 2-ohm design, rigid carbon-fiber cones and oversized titanium tweeters are engineered for strong output and improved clarity in an open-air motorcycle environment. Each speaker handles 150 watts RMS and uses a lightweight neodymium motor, extended-excursion suspension and a high-temperature composite basket. Water-spray, saltwater and UV-resistant materials help prepare the speakers for demanding motorcycle and powersports installations. View Specifications Check Fitment Notes High-Output Harley Speaker Pair 5×7-inch two-way coaxial speaker system Harley-Davidson direct-replacement design Sold as one matched pair 2-ohm nominal impedance per speaker 150 watts RMS per speaker 300 watts maximum per speaker Rigid carbon-fiber cones 1.25-inch titanium dome tweeters Lightweight neodymium motor structures Water-spray, saltwater and UV-resistant construction HXM57F2BK Speaker Overview The Diamond Audio HXM57F2BK is designed as a high-output replacement for compatible Harley-Davidson 5×7-inch speaker locations. Its two-way coaxial configuration combines a carbon-fiber midrange cone and an oversized titanium dome tweeter in one compact direct-replacement speaker assembly. The 2-ohm voice-coil configuration allows a compatible motorcycle amplifier to deliver more output than it typically would into a 4-ohm load. Each speaker must be connected to an amplifier channel that is stable at 2 ohms and configured to remain within the speaker’s usable power range. Diamond Audio uses a lightweight neodymium motor, extended-excursion suspension and a high-temperature molded composite basket to support strong output without excessive speaker weight. Why Riders Choose the HXM57F2BK Harley Direct-Replacement Design The 5×7 frame is designed for compatible factory-style Harley speaker locations, reducing the fabrication associated with a universal speaker installation. High-Power 2Ω Operation The 2-ohm impedance is suited to compatible motorcycle amplifiers designed to produce increased output into lower-impedance loads. Carbon-Fiber Cone A rigid, lightweight carbon-fiber cone supports controlled movement, stronger output and improved durability in open-air audio systems. Oversized Titanium Tweeter The 1.25-inch titanium dome tweeter is designed to produce detailed high-frequency output that remains audible through wind, engine and road noise. Neodymium Motor The lightweight neodymium motor structure supports high output while reducing the weight associated with a conventional ferrite magnet. Weather-Resistant Materials Water-spray, saltwater and UV-resistant materials help protect the speakers in motorcycle, marine and powersports environments. Two-Way Coaxial Speaker Design Carbon-Fiber Midrange Cone The main cone reproduces the vocal, instrument and lower-frequency content handled by the speaker. Its rigid construction supports cleaner movement under higher amplifier output. Titanium Dome Tweeter The integrated 1.25-inch tweeter reproduces the upper frequencies, creating a complete two-way speaker without requiring a separate externally mounted tweeter. Coaxial speaker system: The tweeter is integrated into the speaker assembly. No separate external tweeter location is required for the supplied pair. Amplifier Power and Impedance Matching 2Ω Per Speaker Each HXM57F2BK speaker has a nominal impedance of 2 ohms and should normally be powered from its own compatible amplifier channel. 150W RMS Per Speaker Select and configure the amplifier around the speaker’s continuous RMS rating rather than its short-duration maximum-power figure. Clean Signal Required Correct gain structure, filtering and unclipped amplifier output are critical to reliable operation in a high-output motorcycle system. Left Speaker One 2Ω speaker on one amplifier channel Right Speaker One 2Ω speaker on one amplifier channel Recommended Amplifier Type Two-channel or multi-channel amplifier stable at 2Ω stereo Speaker Power Rating 150W RMS / 300W maximum per speaker Amplifier compatibility: Do not connect these speakers to an amplifier channel that is not stable at 2 ohms. Gain and crossover settings must be configured for the speaker pair and the complete audio system. Diamond Audio HXM57F2BK Specifications Manufacturer Diamond Audio Model HXM57F2BK Speaker Type Two-way coaxial Harley-Davidson direct-replacement speakers Nominal Speaker Size 5×7 inches Quantity Two speakers / one matched pair Nominal Impedance 2Ω per speaker RMS Power Handling 150 watts per speaker Maximum Power Handling 300 watts per speaker Sensitivity 91dB, 1W / 1M Cone Material Rigid carbon fiber Tweeter 1.25-inch oversized titanium dome tweeter Motor Structure Lightweight neodymium motor Suspension Extended-excursion Max Xmax suspension Basket High-temperature lightweight injection-molded composite Mounting Style Flush mount or rear mount Mounting Depth 2.55 inches / 64.84mm Published Cutout Measurement 7.11 inches / 180.72mm Overall Dimensions 7.80 × 5.44 inches / 198.21 × 138.2mm Overall Height 3.11 inches / 78.87mm Environmental Resistance Water-spray and saltwater resistant UV Protection 100% UV-stable materials Measurement clarification: Diamond Audio publishes a single 7.11-inch cutout measurement even though the speaker uses an oval 5×7 frame. Compare the actual mounting template and vehicle opening before modifying any speaker enclosure or saddlebag lid. Weather-Resistant Motorcycle Construction Water-Spray Resistance The speaker materials are designed to tolerate water spray encountered in open-air motorcycle and powersports installations. Saltwater Resistance Materials selected for saltwater resistance provide additional protection in humid and coastal environments. UV-Stable Materials UV-stable components help reduce deterioration caused by prolonged exposure to direct sunlight. Not described as waterproof: Water-spray and saltwater resistance should not be interpreted as a waterproof rating. Protect speaker terminals and wiring connections from standing water and direct high-pressure spray. Harley-Davidson Fitment Notes Verify the exact speaker location: Diamond Audio’s current product page describes the HXM57F2BK as a direct-replacement lid speaker while also referencing factory fairing locations. Confirm the motorcycle year, model, factory 5×7 location and enclosure before ordering. Confirm that the motorcycle uses a factory-style 5×7-inch speaker opening. Verify whether the intended location is a saddlebag lid, fairing or custom enclosure. Measure the actual opening before relying on the published cutout dimension. Confirm at least 2.55 inches of rear mounting depth. Check the 3.11-inch overall height against the grille or lid clearance. Confirm that the speaker terminals clear the enclosure and mounting hardware. Verify that the amplifier is stable at 2 ohms per channel. Do not assume universal fitment across all Harley-Davidson Touring models. Use the factory hardware or appropriate replacement fasteners for the application. Professional fitment verification is recommended before modifying painted lids. Installation and System Setup Disconnect the motorcycle battery before beginning the installation. Remove the existing speaker and inspect the complete mounting opening. Compare the HXM57F2BK basket and mounting pattern with the factory location. Confirm mounting depth, terminal clearance and grille clearance. Verify that the amplifier channel is stable at a 2-ohm load. Observe correct positive and negative speaker polarity. Use weather-resistant terminals or connectors suitable for the location. Configure appropriate high-pass filtering for the installation. Set amplifier gain using clean measured output. Secure all wiring against vibration, moisture, heat and sharp edges. Test both speakers before reinstalling the fairing or saddlebag components. Inspect for rattles, air leaks and mechanical interference after assembly. Best For Compatible Harley-Davidson factory 5×7 speaker replacements Harley Touring motorcycles using supported 5×7 locations Two-ohm motorcycle amplifier systems Riders wanting stronger output than a basic factory speaker Systems requiring integrated midrange and high-frequency reproduction Motorcycle installations exposed to sunlight and occasional water spray Amplified Harley-Davidson audio systems Related Motorcycle Audio Categories Motorcycle Speaker Upgrades Shop Motorcycle Speakers Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Amplifiers and Integration Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Diamond Audio HXM57F2BK FAQ Are the HXM57F2BK speakers sold as a pair? Yes. The product includes two matched 5×7-inch coaxial speakers. What impedance are the speakers? Each speaker has a nominal impedance of 2 ohms. How much power can each speaker handle? Each HXM57F2BK is rated for 150 watts RMS and 300 watts maximum. Does each speaker include a tweeter? Yes. Each coaxial speaker includes an integrated oversized 1.25-inch titanium dome tweeter. What material is used for the main cone? The main speaker cone uses rigid carbon-fiber construction. What amplifier should be used? Use an amplifier that is stable at 2 ohms per channel and can be configured around the speakers’ 150-watt RMS rating. Are these direct-replacement Harley speakers? Diamond Audio markets them as Harley-Davidson 5×7 direct-replacement speakers. Exact year, model and speaker-location compatibility must still be verified. Are these fairing or saddlebag speakers? Diamond Audio’s current official page contains conflicting references to lid and fairing locations. Confirm the actual factory 5×7 location on the motorcycle before ordering. What is the mounting depth? The published mounting depth is 2.55 inches, or 64.84mm. Can these be flush mounted or rear mounted? Diamond Audio lists both flush-mount and rear-mount installation capability, subject to the enclosure and mounting location. Are the speakers waterproof? Diamond Audio describes them as resistant to water spray and saltwater and built with UV-stable materials. The manufacturer does not publish a waterproof IP rating for this model. Do these require a DSP? A DSP is not required for basic operation, but a compatible processor can provide more precise filtering, equalization, time alignment and output control. Need Help Confirming Your Harley 5×7 Speaker Fitment? Garage Bagger Stereo can help verify the motorcycle’s speaker location, mounting depth, 2-ohm amplifier compatibility, wiring, filtering and factory or aftermarket signal integration before the speakers are installed. Installation Services Request a Custom BuildSale -
SaleDiamond Audio HXM69FBK 6x9" 2-Way High Output Marine Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio HXM69FBK 6x9" 2-Way High Output Marine Speakers (2Ω or 4Ω) All Weather 6x9" Marine Speakers SPECIFICATIONS: HXM69FBK (2Ω or 4Ω) SPEAKER SIZE - 6X9" POWER HANDLING RMS: 150 POWER HANDLING MAX: 300 SPEAKER TYPE - HORN LOADED Procoaxial OHMS (PER COIL) - 4Ω or 2Ω NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - CARBON FIBER DIAPHRAGM MATERIAL - TITANIUM BASKET MATERIAL - FIBREGLASS REINFORCED POLYMER MAGNET TYPE - NEODYMIUM SURROUND MATERIAL - RUBBER WATER RESISTANCE - VOICE COIL DIAMETER - INCH (MM) - 2" THIELE/SMALL PARAMETERS SENSITIVITY (1W/1M): 94 RE (Ω) [SERIES]: 2 QMS: 3.759 QES: 0.471 QTS: 0.419 FS (HZ): 69 VAS (L): 23.014 CMS (MM/N): 0.343 MMS (G): 15.599 SD (M2): 217.28 BL (T*M): 5.348 XMAX (MM): 3.25 MOUNTING DEPTH: IN.(MM):3.10" (78.81MM) CUT OUT DIAMETER IN.(MM):8.51" (216.03MM) OVER ALL DIAMETER IN.(MM):9.46" (240.29MM) OVER ALL HEIGHT IN.(MM):3.58" (90.81MM) HXMF4 Series ManualSale -
SaleDiamond Audio MS69CX 6x9" 2-Way Coaxsub Speakers (Pair)
Vendor:Diamond AudioDiamond Audio MS69CX MS69CX – 6” X 9” 2-WAY High Output Coaxsub Speaker System 6"x9" 2-Way High Power MotorSport Coaxsub Manufactured to IPx65 Marine Grade Compliant Specifications 1" High Output Titanium Dome Tweeter UV-Treated Thermal Molded Waterproof Kevlar Cone with Rubber Surround 12dB Bessel Crossover Network Super High Energy Ferrite Motor System with Milled Aluminum Top Plate T-Yoke Back Plate Drilled for 35% More Cooling, Increased Power Handling High Temperature Cast Aluminum Basket Sold in pairs Specifications: Power Handling: 120W RMS 240W Max High Output Titanium Dome Tweeter: 1" Freq Response 45-23k Nominal Impedance: 4-Ohm Mounting Depth: 3.818" Cut-Out Diameter: 5.984" x 8.858"Sale
Key Specifications
| Speaker Size | 6×9 |
| Speaker Type | Coaxial (midrange + tweeter) |
| Primary Use | Saddlebag lids and rear speaker locations |
| Performance Focus | Higher output and stronger midbass |
| System Pairing | Aftermarket amplification and DSP tuning |
| Install Requirement | Correct mounting depth, sealing, and vibration control |
Specs summarized from manufacturer technical data. Always verify fitment, mounting depth, impedance, and filtering before installation.
6×9 Motorcycle Speaker Overview
6×9 Coaxial Speakers for Saddlebag Lids and Rear Fill
6×9 motorcycle coaxial speakers are commonly used in saddlebag lids and rear speaker locations where higher output and increased cone area are required. This collection includes purpose-built 6×9 coaxial speakers engineered specifically for Harley Davidson and Indian touring motorcycles.
Compared with smaller fairing speakers, 6×9 coaxial speakers deliver greater midbass presence and overall output when properly powered. Their larger cone area makes them well-suited for rear fill applications, lid-mounted systems, and full front-and-rear audio builds designed to remain audible at highway speeds.
All speakers in this collection are selected for motorcycle-specific operating conditions, including sustained vibration, thermal exposure, and limited mounting depth. Proper sensitivity and impedance characteristics ensure compatibility with aftermarket amplifiers and DSP-controlled systems.
This collection supports a variety of use cases, including:
• Saddlebag lid speaker systems
• Rear fill for balanced front-and-rear staging
• High-output touring audio builds
• Plug-and-play and custom-installed systems
For optimal performance, 6×9 coaxial speakers should be paired with dedicated amplification and proper signal control. DSP integration allows level matching, crossover control, and tuning to ensure rear speakers complement the rest of the system without overpowering it.
This page serves as the primary category for rear speakers for riders expanding beyond fairing-only audio systems.
What Are 6x9" Coaxial Speakers?
6x9" coaxial speakers are designed to deliver a full range of sound, combining a woofer cone for deep bass with a dome tweeter for crystal-clear highs. This integration of multiple components into a single unit ensures a balanced audio experience for riders. With their polypropylene cone and rubber surround, these speakers are built for durability and exceptional sound performance, even in challenging environments. They’re the perfect speaker choice for audio enthusiasts who demand better sound quality on the road.
Factors to Consider When Choosing 6x9" Motorcycle Speakers
Fitment and Installation: 6x9" coaxial speakers often come with multi-fit installation adapters, making them versatile for various setups. Whether replacing a factory speaker or adding an external amp for more power, choosing quality speakers that fit your motorcycle's layout is crucial.
Weather Resistance: Durable materials like rubber surrounds and ferrite magnets ensure your speakers can handle the elements, providing better sound quality no matter where you ride.
Power and Performance: Look for 2-way coaxial speakers with dedicated crossovers and a high frequency range to enhance sound clarity at high volumes. A speaker’s watts RMS and frequency response are key factors for consistent, clear highs and lows.
Audio System Compatibility: Make sure your chosen speakers pair well with your audio system, whether it’s a custom setup with a head unit and amplifier or a straightforward upgrade to car audio speakers.
Where Do 6x9" Coaxial Speakers Go on My Motorcycle?
The versatility of 6x9" coaxial speakers allows them to be installed in several locations on your motorcycle for optimal sound quality.
Saddlebags: Adding speakers to custom saddlebags creates a powerful rear audio system, delivering full range sound to you and your passengers.
Fairings: Speakers installed in the fairings deliver direct sound, ensuring better sound performance at high speeds.
Tour Packs: For riders with tour packs, 6x9" speakers are a great option to enhance the overall audio experience, offering both volume and clarity.
Why Choose Garage Bagger Stereo for Your 6x9" Coaxial Speakers?
Garage Bagger Stereo offers audio equipment tailored to Harley Davidson riders, specializing in high-quality 6x9" coaxial loudspeakers. With brands like Rockford Fosgate and a selection of series speakers featuring silk dome tweeters and voice coils designed for studio monitor-level sound, we deliver better sound and reliability. Our experts ensure your speakers, whether coaxial or component, are matched perfectly to your bike’s head unit and amplifier for superior time alignment and frequency range. Elevate your ride with high-performance car audio speakers and enjoy an audio system that’s built for the road.