-
MMATS Pro Audio MBW690 6Ă—9" Subwoofer
Vendor:MMats Pro AudioMMATS Pro Audio MBW690 6×9" Subwoofer Single MMATS believes this to be the first in our industry of a true 6×9 Subwoofer. The Voice Coil is the same spec as our LS series of subwoofers. At 2” in diameter and a winding length of 1.25”, this subwoofer delivers an excursion that has never been seen before in a 6×9 speaker. An excellent under-the-seat truck application and with 4 of these firing forward, the amount of bass is sure to impress. Most importantly, you do not need to raise your seat. At a 2 cubic feet net with a 20 sq. inch port tuned to 35Hz, you would be hard-pressed to find a higher output approach—a tremendous subwoofer for Bagger Audio. Specs: Power Handling: 500 Watts Program / 300 Watts RMS Voice Coil: 2" Copper wire, Aluminum former, single 4-ohm Magnet: 50 oz. Y-30 ferrite magnet / NEO blend Freq. Response: 28Hz-250Hz Efficiency: 88dB 1 watt @ 1 meter  -
Rockford Fosgate 14+ Harley-Davidson CVO Stage-2 Kit (Gen-3)
Vendor:Rockford FosgateRockford Fosgate HD14CVO-STG2 UNRELENTING PERFORMANCE The HD14CVO-STG2 is a high-performance 2-speaker, 800-watt amplified audio system that includes the following: • (2) 6.5" fairing speakers • (2) 5x7" saddlebag speakers • (1) 800W 4-channel amp • (1) amp installation kit You must flash your factory radio to use this kit. FEATURES AT A GLANCE Kits bolt to factory attachment points Plug and Play design for easy installation No drilling or cutting is required. Direct connect wiring harnesses for Harley-Davidson® models M5-800X4: 800-watt 4-channel IPX6 Element Ready™ amplifier TMS57: Factory replacement 5"x7" 2-way speaker with integrated phase-aligned 25 mm tweeter 90-degree harness included with amp install kit for Road Glide® installations Factory Harley-Davidson® Boom!™ Box 4.3, 6.5GT, and GTS must be flashed to use this kit RATS (Rockford Automated Testing System) proprietary quality & performance tested Klippel Verified certification program delivers the best possible loudspeakers T-harness features loop-thru for Digital Signal Processor (DSR1 sold separately) T-harness supports front/rear fader (requires flash: "Rockford Fosgate 2014+ All Bikes") Y-adaptors support the expansion of speakers in the lower fairing, saddlebags, or Tour-Pak® 2-Year Warranty TMS65: 6.5" 2-way Element Ready™ speaker with integrated phase-aligned 25 mm tweeter Speakers custom-tuned to hear music over wind, road & exhaust noise at highway speed RFK-HD14M5: Amp install kit for M5-800X4 on 2014+ Harley-Davidson® models The next step in motorcycle performance is our M5 audio kits, which are the loudest and clearest audio systems we’ve created. Featuring simple plug-and-play installation and paired with freeway speed output all create the best in-class on-bike audio experience. Plug-and-Play Design: It is designed to work right out of the box. Everything is included for easy installation and to ensure less time in the garage and more time out riding. Full Throttle Output: Audio engineered to perform on the open road. Speakers and amplifiers are specifically tuned and designed to not only overcome wind, road, and exhaust noise but also to give you that second-to-none audio experience on your bike. RF3 (Rockford Factory Fit and Finish): Designed and engineered to match and compliment the factory fit and finish of your bike. These components are purpose-built to the exact specifications to ensure the best-in-class fitment and look. Element Ready™: Purpose-built for the harsh motorcycle environment. The speakers and amplifier are designed to stand up to water, dirt, UV, and motorcycle vibration, ensuring that your audio system will stand the test of time.
-
SaleDB Drive Euphoria Xpert EX69NPS-CF 6Ă—9" 2-Way NEO Carbon Fiber Point Source Loudspeaker
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. EX69NPS-CF 6×9" 2-Way NEO Carbon Fiber Point Source Loudspeaker Featuring a high-intensity NEO ring magnet and an IP65-rated weather-resistant carbon fiber cone, this speaker is built to withstand the elements and deliver top-notch performance. Features: 1.5″ (38.1mm) Midrange voice coil High-intensity NEO ring magnet IP65 rated weather resistant Carbon fiber cone Cloth surround Stamped steel basket Wide dispersion 1″ aluminum dome tweeter Protective grill Specs: Resonant Frequency (fs): 68.8Hz D.C. Voice Coil Resistance: (Re) Nominal Impedance: 4Ω Power Handling: 400 Watts Dynamic Wattage: 800 Watts Sensitivity (1w/1m): 92dB Frequency Response: 77Hz-19KHzSale -
Diamond Audio HXM69FBK 6x9" 2-Way High Output Marine Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio HXM69FBK 6x9" 2-Way High Output Marine Speakers (2Ω or 4Ω) All Weather 6x9" Marine Speakers  SPECIFICATIONS: HXM69FBK (2Ω or 4Ω) SPEAKER SIZE - 6X9" POWER HANDLING RMS: 150 POWER HANDLING MAX: 300 SPEAKER TYPE - HORN LOADED Procoaxial OHMS (PER COIL) - 4Ω or 2Ω NUMBER OF VOICE COILS - SINGLE CONE MATERIAL - CARBON FIBER DIAPHRAGM MATERIAL - TITANIUM BASKET MATERIAL - FIBREGLASS REINFORCED POLYMER MAGNET TYPE - NEODYMIUM SURROUND MATERIAL - RUBBER WATER RESISTANCE - VOICE COIL DIAMETER - INCH (MM) - 2" THIELE/SMALL PARAMETERS SENSITIVITY (1W/1M): 94 RE (Ω) [SERIES]: 2 QMS: 3.759 QES: 0.471 QTS: 0.419 FS (HZ): 69 VAS (L): 23.014 CMS (MM/N): 0.343 MMS (G): 15.599 SD (M2): 217.28 BL (T*M): 5.348 XMAX (MM): 3.25 MOUNTING DEPTH: IN.(MM):3.10" (78.81MM) CUT OUT DIAMETER IN.(MM):8.51" (216.03MM) OVER ALL DIAMETER IN.(MM):9.46" (240.29MM) OVER ALL HEIGHT IN.(MM):3.58" (90.81MM) HXMF4 Series Manual -
Diamond Audio MS692NEO 6x9" 2-Way Coaxial Neo Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio MS692NEO 6x9" 2-Way Coaxial Neo Speakers (2Ω or 4Ω) All Weather 6x9" Pro Coaxial Driver Speaker  SPECIFICATIONS: MS692NEO (2Ω or 4Ω) SPEAKER SIZE - 6X9" SPEAKER TYPE - HORN LOADED CO AXIAL BI-AMPABLE YES OHMS (PER COIL) - 4 NUMBER OF VOICE COILS - DUAL FIELD SERVICABLE VOICE COIL - YES CONE MATERIAL - CARBON FIBER DIAPHRAGM MATERIAL - (PEN) POLYETHYLENE NAPHTHALATE BASKET MATERIAL - CAST ALUMINIUM MAGNET TYPE - NEODYMIUM SURROUND MATERIAL - RUBBER WATER RESISTANCE - VOICE COIL DIAMETER - INCH (MM) - 2" THIELE/SMALL PARAMETERS SENSITIVITY (1W/1M): 94 RE (Ω) [SERIES]: 3.2 QMS: 7.368 QES: 0.597 QTS: 0.552 FS (HZ): 104 VAS (L): 9 CMS (MM/N): 0.148 MMS (G): 15.6 SD (M2): 206.84 BL (T*M): 7.418 XMAX (MM): 1.2 POWER HANDLING RMS: 200 POWER HANDLING MAX: 400 MOUNTING DEPTH: IN.(MM):3.74" (95MM) CUT OUT DIAMETER IN.(MM):8.58" (218MM) OVER ALL DIAMETER IN.(MM):9.19" (233.5MM) OVER ALL HEIGHT IN.(MM):4.08" (103.7MM) -
SaleDiamond Audio MS69CX 6x9" 2-Way Coaxsub Speakers (Pair)
Vendor:Diamond AudioDiamond Audio MS69CX MS69CX – 6” X 9” 2-WAY High Output Coaxsub Speaker System 6"x9" 2-Way High Power MotorSport Coaxsub Manufactured to IPx65 Marine Grade Compliant Specifications 1" High Output Titanium Dome Tweeter UV-Treated Thermal Molded Waterproof Kevlar Cone with Rubber Surround 12dB Bessel Crossover Network Super High Energy Ferrite Motor System with Milled Aluminum Top Plate T-Yoke Back Plate Drilled for 35% More Cooling, Increased Power Handling High Temperature Cast Aluminum Basket Sold in pairs Specifications: Power Handling: 120W RMS 240W Max High Output Titanium Dome Tweeter: 1" Freq Response 45-23k Nominal Impedance: 4-Ohm Mounting Depth: 3.818" Cut-Out Diameter: 5.984" x 8.858"Sale
What Are 6x9" Coaxial Speakers?
6x9" coaxial speakers are designed to deliver a full range of sound, combining a woofer cone for deep bass with a dome tweeter for crystal-clear highs. This integration of multiple components into a single unit ensures a balanced audio experience for riders. With their polypropylene cone and rubber surround, these speakers are built for durability and exceptional sound performance, even in challenging environments. They’re the perfect speaker choice for audio enthusiasts who demand better sound quality on the road.
Factors to Consider When Choosing 6x9" Motorcycle Speakers
Fitment and Installation: 6x9" coaxial speakers often come with multi-fit installation adapters, making them versatile for various setups. Whether replacing a factory speaker or adding an external amp for more power, choosing quality speakers that fit your motorcycle's layout is crucial.
Weather Resistance: Durable materials like rubber surrounds and ferrite magnets ensure your speakers can handle the elements, providing better sound quality no matter where you ride.
Power and Performance: Look for 2-way coaxial speakers with dedicated crossovers and a high frequency range to enhance sound clarity at high volumes. A speaker’s watts RMS and frequency response are key factors for consistent, clear highs and lows.
Audio System Compatibility: Make sure your chosen speakers pair well with your audio system, whether it’s a custom setup with a head unit and amplifier or a straightforward upgrade to car audio speakers.
Where Do 6x9" Coaxial Speakers Go on My Motorcycle?
The versatility of 6x9" coaxial speakers allows them to be installed in several locations on your motorcycle for optimal sound quality.
Saddlebags: Adding speakers to custom saddlebags creates a powerful rear audio system, delivering full range sound to you and your passengers.
Fairings: Speakers installed in the fairings deliver direct sound, ensuring better sound performance at high speeds.
Tour Packs: For riders with tour packs, 6x9" speakers are a great option to enhance the overall audio experience, offering both volume and clarity.
Why Choose Garage Bagger Stereo for Your 6x9" Coaxial Speakers?
Garage Bagger Stereo offers audio equipment tailored to Harley Davidson riders, specializing in high-quality 6x9" coaxial loudspeakers. With brands like Rockford Fosgate and a selection of series speakers featuring silk dome tweeters and voice coils designed for studio monitor-level sound, we deliver better sound and reliability. Our experts ensure your speakers, whether coaxial or component, are matched perfectly to your bike’s head unit and amplifier for superior time alignment and frequency range. Elevate your ride with high-performance car audio speakers and enjoy an audio system that’s built for the road.