Collection: Cerwin Vega
Cerwin-Vega Motorcycle Audio for Harley-Davidson Baggers (1998–Current)
Unleash powerful, crystal-clear sound on your Harley-Davidson Bagger with Cerwin-Vega motorcycle audio, engineered for 1998–current touring models. Whether you ride a Street Glide, Road Glide, Electra Glide, or Ultra, our high-SPL speakers, compact amplifiers, and plug-and-play audio kits deliver volume and clarity that stock Harley systems can’t match. Designed for weather resistance, high-output performance, and easy installation, Cerwin-Vega motorcycle speakers cut through wind and engine noise, giving you the ultimate soundtrack for the open road. Upgrade your Harley-Davidson touring motorcycle audio system today and experience legendary Cerwin-Vega performance built for baggers.
Shop Cerwin-Vega Speakers, Amps & Audio Kits for Harley Baggers
- Cerwin-Vega motorcycle speakers – high-SPL, weather-resistant, and engineered for fairing, saddlebag, and tour pack installs.
- Motorcycle amplifiers – compact, efficient, and designed to power your music at highway speeds.
- Plug-and-play audio kits – custom-fit for Harley-Davidson Baggers 1998–current, eliminating guesswork and complex wiring.
- Subwoofers & bass solutions – deep, rich low-end that transforms your riding experience.
-
SaleCerwin-Vega 23.5+ Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 23.5+ 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Wiring harness included Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment 23.5-Current Street Glide and Road Glide, including CVO ST Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 2023.5 and Newer Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley. Compatibility with Harley Davidson Motorcycles This cut-in lid kit is compatible with a variety of Harley Davidson models, including: Street Glide Road Glide The fitment range extends from 2023.5 to the current model year, ensuring you can enjoy enhanced audio regardless of your bike's vintage.Sale -
Cerwin-Vega CMHR2 - 98+ HD 2 Channel Amplifier Installation Kit
Vendor:Cerwin-VegaCerwin-Vega CMHR2 Harley Davidson 1998-current 2-Channel Amplifier Installation Kit Product Details Pre-cut, Loomed Power/Ground Wire & Speaker Wire Harnesses Direct-Fit Wiring with Ferrule Connectors and Fused Power Terminals Direct-fit OEM-Compatible Harness Connectors Designed for Street, Electra, and Road Guide Motorcycles 8-Gauge Oxygen-Free Copper Power and Ground Cables 16-Gauge Speaker Wiring 60-Amp MAXI fuse protection Specifications 8 Gauge OFC Power and Ground Battery Connections Waterproof fuse holder includes a 60A mini ANL fuse and Allen key for service. Heavy-duty power quick disconnects Quality twisted OFC RCAs with quick disconnects included All cable runs are blacked out, loomed, & terminated Stainless steel chrome plated wire inlets for both saddlebags included Comprehensive terminal kit with speaker terminal & amplifier power connections Zip ties Amplifier remote turn-on integrated into quick disconnect harness No special tools needed for installation History of Innovation Since 1954, Cerwin-Vega has stood at the forefront of the audio industry, delivering audio equipment with high-quality materials that have been verified and tested to ensure the best sounding and most reliable product on the market. These products represent the culmination of decades of acoustic research and technological advancement, utilizing the latest advances in acoustic technology in sound reproduction for your vehicle. This 2-channel version of their Harley Davidson-specific audio wiring kit is for speakers in bags only with 2 channels of signal RCA. Designed exclusively for saddlebag speaker configurations, this specialized kit features two dedicated channels of RCA signal connectivity, optimized for the unique requirements of motorcycle audio systems. Whether you're boosting your audio performance for highway cruising or upgrading your bike’s stereo for richer, clearer sound, this innovative Cerwin-Vega 2-channel amp installation kit provides the perfect foundation for a hassle-free setup. Key Features Complete Wiring Kit: Includes high-quality power, ground, and speaker wiring for a smooth and professional installation.Optimized for Harley-Davidson Models (1998-2023): Precision-engineered to integrate with your bike’s electrical system.Heavy-Duty Components: Specifically built to handle the demands of motorcycle audio systems while maintaining reliability.Simple Plug-and-Play Design: Fit for quick and easy installation and reduces the need for modifications.Supports 2-Channel Amplifiers: Designed for use with Cerwin-Vega and other compatible motorcycle amplifiers. -
Cerwin-Vega CMHR4 - 98+ HD 4 Channel Amplifier Installation Kit
Vendor:Cerwin-VegaCerwin-Vega CMHR4 Harley Davidson 1998-current 4-Channel Amplifier Installation Kit Product Details Pre-cut, Loomed Power/Ground Wire & Speaker Wire Harnesses Direct Fit Wiring with Ferrule Connectors and Fused Power Terminals Includes Direct-fit OEM-Compatible Harness Connectors Compatible with Street, Electra, and Road Glide models Premium 8-Gauge Oxygen-Free Copper Power/Ground Wiring 16-Gauge Speaker Wiring 60-Amp MAXI fuse protection Specifications 8 Gauge OFC Power and Ground Battery Connections Waterproof fuse holder with 60A mini ANL fuse and Allen key Heavy-duty power quick disconnects Quality twisted OFC RCAs with quick disconnects included All cable runs are blacked out, loomed, & terminated Stainless steel chrome plated wire inlets for both saddlebags Speaker terminal assortment, amplifier power & speaker terminal forks Zip ties Amplifier remote turn-on integrated into quick disconnect harness No special tools are needed for installation 70 Years of Audio Excellence Established in 1954, Cerwin-Vega continues its legacy of high-performance audio solutions. Each product undergoes rigorous testing and quality assurance to deliver superior sound reproduction and reliability for your motorcycle. These audio solutions use the latest technology to offer professional-grade sound quality and reliability, every time you ride. This specialized 4-channel amp installation kit is engineered for saddlebag speaker setups on Harley Davidson motorcycles, featuring four channels of RCA signal connectivity. This purpose-built system is meant to meet the specific needs of these motorcycles for a top-tier audio experience. Whether you're enhancing your sound quality for highway cruising or seeking premium audio performance for your rides, this Cerwin-Vega installation kit provides the foundation for a seamless, professional-grade audio upgrade. Key Features Complete Wiring Kit: Includes high-quality power, ground, and speaker wiring for a clean and professional installation.Optimized for Harley-Davidson Models (1998-2023): Precision-engineered for seamless compatibility with your bike’s electrical system.Heavy-Duty Components: Built to handle the specific demands of motorcycle audio systems while maintaining reliability.Streamlined Design: Makes amplifier installation faster and easier, reducing the need for modifications.Supports 4-Channel Amplifiers: Compatible with Cerwin-Vega and other motorcycle amplifiers. -
Cerwin-Vega 98-13 Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 98-13 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Plug-and-play wiring harness Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment Harley Davidson® 1998-2013 models Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 1998-2013 Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley. -
Cerwin-Vega ST69CX Stroker 6x9" 2-Way Coax Speakers
Vendor:Cerwin-VegaCerwin-Vega Stroker 6x9" 2-Way Coax Speakers (2Ω or 4Ω) ST69CX Featuring a polypropylene cone, titanium dome tweeter, cast aluminum basket, and IPX5-rated construction, this 4-ohm component-style coax set delivers deep midbass, crisp highs, and high SPL performance, making it ideal for aggressive builds, show vehicles, and serious daily drivers. Key Specifications Speaker size: 6x9 in Speaker type: component/coax set Bi-ampable: yes Impedance: 4 ohm (single voice coil) Cone material: polypropylene Diaphragm material: titanium Basket material: cast aluminium Magnet type: woofer ferrite / tweeter neodymium Surround material: Santoprene Crossover: internal Water resistance: IPX5 Frequency response: 45Hz–20kHz Voice coil diameter: 1.5 in (38mm) Sensitivity (1W/1m): 90.5dB Vas: 4.5L Xmax: 39mm (1.6 in) Power handling (RMS): 125W Power handling (MAX): 500W Mounting depth: 4.25 in (107.9mm) Mounting diameter: 8.8 x 9.5 in (225.5 x 241.3mm). -
Cerwin-Vega SM69F4 RPM Stroker Marine 6x9" 2-Way Speakers
Vendor:Cerwin-VegaCerwin-Vega RPM Stroker Marine 6x9" 2- Way Speakers SM69F4 Built on a cast aluminum basket with IPX5 water resistance, UV-stable waterproof composite cone, and integrated RGB LED lighting, they are engineered for harsh marine and powersports environments while maintaining clean highs, strong midbass, and long-term durability. Key Specifications: Speaker size: 6x9 in Speaker type: 2-way coaxial Impedance: 4 ohm (single voice coil) Cone material: polypropylene Diaphragm material: titanium Basket material: cast aluminium Magnet type: ferrite (ceramic) Surround material: treated cloth Crossover: internal Water resistance: IPX5 Frequency response: 80Hz–20kHz Voice coil diameter: 1.5 in (38mm) Sensitivity (1W/1m): 93dB Xmax: 4mm Power handling (RMS): 150W Power handling (MAX): 300W Mounting diameter: 8.64 x 6 in (219.5 x 152.5mm). -
Cerwin-Vega PH694 6x9" Pro Full-Range Coaxial Horn Speakers
Vendor:Cerwin-VegaCerwin-Vega 6x9" Pro Full-Range Coax Horn Speakers PH694 The Cerwin-Vega PH694 6x9" Pro Series horn-loaded coaxial speakers deliver powerful output, sharp high-frequency projection, and strong midbass for motorcycles and high-SPL mobile audio systems. Featuring a treated paper cone, compression horn tweeter, and rugged steel basket, the PH694 provides clear, high-efficiency sound that cuts through road and wind noise while maintaining durability under heavy use. Specifications: Speaker Type: 2-Way Full-Range Coaxial Horn SpeakerSize: 6" x 9"Power Handling (RMS): 160 wattsPower Handling (Peak): 320 wattsImpedance: 4 ohm (Single Voice Coil)Sensitivity: 101 dB (High-efficiency SPL output)Frequency Response: 80 Hz – 18,000 HzMidrange Cone Material: Treated paperTweeter Type: Horn-loaded compression driverTweeter Diaphragm: PolyimideSurround Material: Treated clothFrame/Basket: Stamped steelMagnet Type: Ferrite (Ceramic)Crossover: Internal passive networkBi-Amp Capable: YesMounting Depth: 3.9 in (approx.)Cutout Dimensions: 8.74 in x 5.98 inRecommended Use Cases:– Motorcycle audio– Powersports / side-by-side– High-SPL car audio– Outdoor/open-air vehicles– Demo builds and competition systems
-
Sale
Cerwin-Vega 23.5+ Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 23.5+ 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Wiring harness included Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment 23.5-Current Street Glide and Road Glide, including CVO ST Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 2023.5 and Newer Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley. Compatibility with Harley Davidson Motorcycles This cut-in lid kit is compatible with a variety of Harley Davidson models, including: Street Glide Road Glide The fitment range extends from 2023.5 to the current model year, ensuring you can enjoy enhanced audio regardless of your bike's vintage.Sale -
Cerwin-Vega CMHR2 - 98+ HD 2 Channel Amplifier Installation Kit
Vendor:Cerwin-VegaCerwin-Vega CMHR2 Harley Davidson 1998-current 2-Channel Amplifier Installation Kit Product Details Pre-cut, Loomed Power/Ground Wire & Speaker Wire Harnesses Direct-Fit Wiring with Ferrule Connectors and Fused Power Terminals Direct-fit OEM-Compatible Harness Connectors Designed for Street, Electra, and Road Guide Motorcycles 8-Gauge Oxygen-Free Copper Power and Ground Cables 16-Gauge Speaker Wiring 60-Amp MAXI fuse protection Specifications 8 Gauge OFC Power and Ground Battery Connections Waterproof fuse holder includes a 60A mini ANL fuse and Allen key for service. Heavy-duty power quick disconnects Quality twisted OFC RCAs with quick disconnects included All cable runs are blacked out, loomed, & terminated Stainless steel chrome plated wire inlets for both saddlebags included Comprehensive terminal kit with speaker terminal & amplifier power connections Zip ties Amplifier remote turn-on integrated into quick disconnect harness No special tools needed for installation History of Innovation Since 1954, Cerwin-Vega has stood at the forefront of the audio industry, delivering audio equipment with high-quality materials that have been verified and tested to ensure the best sounding and most reliable product on the market. These products represent the culmination of decades of acoustic research and technological advancement, utilizing the latest advances in acoustic technology in sound reproduction for your vehicle. This 2-channel version of their Harley Davidson-specific audio wiring kit is for speakers in bags only with 2 channels of signal RCA. Designed exclusively for saddlebag speaker configurations, this specialized kit features two dedicated channels of RCA signal connectivity, optimized for the unique requirements of motorcycle audio systems. Whether you're boosting your audio performance for highway cruising or upgrading your bike’s stereo for richer, clearer sound, this innovative Cerwin-Vega 2-channel amp installation kit provides the perfect foundation for a hassle-free setup. Key Features Complete Wiring Kit: Includes high-quality power, ground, and speaker wiring for a smooth and professional installation.Optimized for Harley-Davidson Models (1998-2023): Precision-engineered to integrate with your bike’s electrical system.Heavy-Duty Components: Specifically built to handle the demands of motorcycle audio systems while maintaining reliability.Simple Plug-and-Play Design: Fit for quick and easy installation and reduces the need for modifications.Supports 2-Channel Amplifiers: Designed for use with Cerwin-Vega and other compatible motorcycle amplifiers. -
Cerwin-Vega CMHR4 - 98+ HD 4 Channel Amplifier Installation Kit
Vendor:Cerwin-VegaCerwin-Vega CMHR4 Harley Davidson 1998-current 4-Channel Amplifier Installation Kit Product Details Pre-cut, Loomed Power/Ground Wire & Speaker Wire Harnesses Direct Fit Wiring with Ferrule Connectors and Fused Power Terminals Includes Direct-fit OEM-Compatible Harness Connectors Compatible with Street, Electra, and Road Glide models Premium 8-Gauge Oxygen-Free Copper Power/Ground Wiring 16-Gauge Speaker Wiring 60-Amp MAXI fuse protection Specifications 8 Gauge OFC Power and Ground Battery Connections Waterproof fuse holder with 60A mini ANL fuse and Allen key Heavy-duty power quick disconnects Quality twisted OFC RCAs with quick disconnects included All cable runs are blacked out, loomed, & terminated Stainless steel chrome plated wire inlets for both saddlebags Speaker terminal assortment, amplifier power & speaker terminal forks Zip ties Amplifier remote turn-on integrated into quick disconnect harness No special tools are needed for installation 70 Years of Audio Excellence Established in 1954, Cerwin-Vega continues its legacy of high-performance audio solutions. Each product undergoes rigorous testing and quality assurance to deliver superior sound reproduction and reliability for your motorcycle. These audio solutions use the latest technology to offer professional-grade sound quality and reliability, every time you ride. This specialized 4-channel amp installation kit is engineered for saddlebag speaker setups on Harley Davidson motorcycles, featuring four channels of RCA signal connectivity. This purpose-built system is meant to meet the specific needs of these motorcycles for a top-tier audio experience. Whether you're enhancing your sound quality for highway cruising or seeking premium audio performance for your rides, this Cerwin-Vega installation kit provides the foundation for a seamless, professional-grade audio upgrade. Key Features Complete Wiring Kit: Includes high-quality power, ground, and speaker wiring for a clean and professional installation.Optimized for Harley-Davidson Models (1998-2023): Precision-engineered for seamless compatibility with your bike’s electrical system.Heavy-Duty Components: Built to handle the specific demands of motorcycle audio systems while maintaining reliability.Streamlined Design: Makes amplifier installation faster and easier, reducing the need for modifications.Supports 4-Channel Amplifiers: Compatible with Cerwin-Vega and other motorcycle amplifiers. -
Cerwin-Vega 98-13 Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 98-13 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Plug-and-play wiring harness Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment Harley Davidson® 1998-2013 models Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 1998-2013 Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley.
Ride Louder, Ride Clearer – Cerwin-Vega for Harley-Davidson Baggers
From plug-and-play speaker kits to high-output amplifiers and weatherproof subwoofers, Cerwin-Vega motorcycle audio is the go-to choice for Harley-Davidson riders who demand more from their sound systems. Built for Harley touring models from 1998–current, these products are engineered to fit Street Glide, Road Glide, Electra Glide, and Ultra models without cutting or modification. Each component is tested for vibration resistance, waterproofing, and road-ready durability, so you get long-lasting performance at any speed. Whether you’re looking to replace your stock Harley speakers or build a complete custom audio upgrade, Garage Bagger Stereo has the Cerwin-Vega motorcycle speakers, amps, and kits you need to make your music louder, clearer, and better than ever.