-
SaleCicada Audio 23.5+ Harley Davidson Street Glide Grills w/Horns
Vendor:Speed RingsSpeed Rings 23.5 CVO+ Harley Davidson STREET GLIDE GRILL W/TWEETER Motorcycle Compression Drivers and Horns 23.5 Harley Davidson Street Glide grills from Brock Black Designs and Speed Rings RR075T – 1” SHALLOW RING RADIATOR HORN TWEETER 200WRMS/400 MAX Power Handling- PAIR Neodymium High Energy/ Light Weight N35 Magnet structure Heavy Duty/ Die-cast Aluminum Basket 4 Ohm for increased durability 1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter Advanced Voice Coil Heat Sink Design for Better Heat Dissipation Frequency Response: 2Hz -20Khz+/-5dB High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V) 12dB Crossover with custom tooled/ Vented crossover case Mounting Depth: 0.75” / 18mm Mounting Diameter: 2” / 50mm SOLD ONLY IN PAIRSSale -
SaleCicada Audio 24CHDLID 2024+ H‑D Saddlebag Lid 6×9 Cut‑In Kit
Vendor:Cicada Audio2024+ Harley-Davidson® 6×9 Saddlebag Lid Mounting Kit Cut-in mounting system engineered for the updated 2024+ Harley touring saddlebags View Mounting Kit Motorcycle Speaker Lids Build Consultation THE REFERENCE STANDARD Cut-In. Clamp. Seal. Angled baffle projection, waterproof sealing, and a secure top-load clamp system for real touring use. Start a Build Consultation Call 864-334-6131 Key Specifications Product Type Saddlebag Lid Cut-In Speaker Mounting Kit Application 2024+ Harley-Davidson® Touring Saddlebags (updated design) Speaker Size Supported 6×9 inch Mounting Method Cut-in, top-load baffle with clamping ring Baffle Design Angled baffle for rider-focused projection Construction Materials High-strength ASA plastic + powder-coated steel mesh grille Weather Protection Waterproof gasket system + updated lid gasket seals + rainproof lid covers Notes Speakers not included Specs summarized from manufacturer technical data. Verify fitment and follow the installation guide for proper sealing and long-term reliability. Engineered for the 2024+ Harley Touring Saddlebag Update The 2024+ Harley-Davidson® Saddlebag Lid 6×9″ Cut-In Mounting Kit is engineered specifically for the updated 2024-present Harley touring saddlebags. This kit provides a secure, weather-resistant solution for mounting full-size 6×9 speakers directly into factory saddlebag lids, featuring a precision-cut-in design. Unlike surface-mount or retrofit adapters, this system uses a unique top-load speaker baffle with a dedicated clamping ring and waterproof gasket. The three-part assembly locks the speaker securely in place while maintaining proper lid sealing and structural integrity. An optimized baffle angle projects sound upward and forward toward the rider, improving on-road clarity at speed. This design is intended for real-world touring use where rear speaker placement and projection angle directly affect audibility and system balance. The kit is constructed from high-strength, UV-resistant ASA plastic and finished with a heavy-duty powder-coated steel mesh grille. Updated gasket seals and improved waterproofing allow the use of full-depth, high-output 6×9 speakers without compromising durability or saddlebag function. This mounting kit is compatible with 2024+ Harley touring models equipped with electric-lock saddlebags and supports advanced rear-audio systems when paired with appropriate amplification and tuning. Speakers are not included. Fitment verification and adherence to the installation guide are required. Full Product Specifications Product Type Saddlebag Lid Cut-In Speaker Mounting Kit Application 2024+ Harley-Davidson® Touring Saddlebags (updated design) Speaker Size Supported 6×9 inch Mounting Method Cut-in, top-load baffle with clamping ring Baffle Design Angled baffle for rider-focused projection Construction Materials High-strength ASA plastic; heavy-duty powder-coated steel mesh grille Weather Protection Waterproof gasket system; updated lid gasket seals; rainproof lid covers included Compatibility Cicada 6×9 speakers; Cicada hard divider; Cicada tweeter bridge; Cicada 24RING10; Cicada 24PORT3; Cicada 8″ and 10″ mid-bass drivers; electric-lock saddlebags What’s Included • Speaker grilles and angled baffles • Clamping rings with gaskets • ABS cutout templates • Updated lid gasket seals • Rainproof lid covers • Cicada tethers with crossover pouch • Die-cut speaker gasketing Important Notes • Speakers not included • Verify fitment before installation • Follow the provided installation guide • Designed for full-size, full-depth 6×9 speakersSale -
SaleCicada Audio 24CHDRGG 2024+ Road Glide Grilles
Vendor:Cicada AudioCicada Audio 24CHDRGG Harley Road Glide Replacement Grills (Pair) 2024+ Road Glide Cicada Audio® Branded Grilles Description:Crafted from high-quality aluminum, these custom-built grilles are designed specifically to fit 2024 and newer Harley-Davidson Road Glide models. Each grille includes a Cicada Audio® Branded Emblems, ensuring a precise fit and clean installation. Built for durability and performance, these grilles offer a sleek, factory-style appearance while optimizing audio performance—all proudly featuring the Cicada Audio® brand.Sale -
SaleCicada Audio 24CHDRGGTK-075 Road Glide Grilles with RR075T Tweeters
Vendor:Cicada Audio2023.5 CVO / 2024+ ROAD GLIDE AUDIO Cicada Audio 24CHDRGGTK-075 Road Glide Grilles with RR075T Tweeters Add powerful high-frequency projection to a compatible late-model Harley-Davidson Road Glide with model-specific Cicada Audio kidney grilles loaded with RR075T ring-radiator horn tweeters. Each 4-ohm tweeter uses an aluminum diaphragm, high-temperature voice coil, neodymium motor and external crossover protection to produce efficient, detailed highs that cut through wind, engine and road noise. See Everything Included View Specifications Road Glide Fairing Tweeter Upgrade Road Glide-specific kidney grille design Matched left and right grille pair Two Cicada Audio RR075T horn tweeters 4-ohm impedance per tweeter 50 watts RMS / 100 watts maximum per tweeter 100 watts RMS / 200 watts maximum per pair One-inch aluminum diaphragms N35 neodymium magnet structures 107 dB sensitivity 2 kHz–20 kHz frequency response External 12 dB crossover protection Powder-coated metal grilles Replaceable CRT075 diaphragms Sold as a matched pair High-Output Road Glide Tweeter and Grille Upgrade The Cicada Audio 24CHDRGGTK-075 combines custom Road Glide kidney grilles, integrated tweeter mounting, two RR075T ring-radiator horn tweeters and the required crossover protection in one model-specific fairing upgrade. The RR075T tweeters are designed to improve vocal detail, cymbal definition and upper-frequency projection in open-air motorcycle audio systems. Their high 107 dB sensitivity produces strong output without requiring excessive amplifier power. Powder-coated metal grilles protect the tweeters while maintaining the distinct Road Glide kidney-grille appearance. The compact installation footprint allows the tweeters to sit inside the custom fairing grilles without the bulk of a universal surface-mounted horn. Tweeter and grille kit only: This package does not include 6.5-inch mid-bass or full-range speakers, an amplifier, speaker wiring or factory-radio integration. The RR075T tweeters must be used with their supplied crossover protection. Harley-Davidson Road Glide Fitment 2023.5 CVO Road Glide Intended for compatible late-production CVO Road Glide motorcycles using the redesigned fairing and kidney-grille configuration. 2024+ Road Glide Designed around compatible 2024 and newer Harley-Davidson Road Glide fairing grille locations. Road Glide-specific configuration: These kidney grilles are not designed for Street Glide fairings. Confirm the exact motorcycle year, model, trim, fairing design and existing audio equipment before ordering. Everything Included Left Road Glide Kidney Grille One precision-punched, powder-coated metal grille with an integrated mounting location for the supplied Cicada RR075T tweeter. Right Road Glide Kidney Grille One matching right-side grille engineered for clean, balanced fitment in the compatible Road Glide fairing. Two Cicada RR075T Tweeters One matched pair of 4-ohm ring-radiator horn tweeters with aluminum diaphragms, high-temperature voice coils and N35 neodymium motors. External Crossover Protection Supplied 12 dB crossover protection filters frequencies below the tweeters’ intended operating range and reduces distortion. Why Riders Choose the 24CHDRGGTK-075 Road Glide-Specific Grilles Precision-punched kidney grilles provide cleaner fitment than a universal surface-mounted tweeter installation. High Sensitivity The 107 dB sensitivity rating supports strong high-frequency output with comparatively modest amplifier power. Aluminum Diaphragms Lightweight, rigid diaphragms reproduce crisp detail and retain clarity at elevated motorcycle listening levels. N35 Neodymium Motors Compact high-energy magnet structures provide efficient output without adding unnecessary fairing weight. Advanced Heat Dissipation Integrated heat-sink construction supports more consistent performance during extended high-volume use. Serviceable Design The tweeter diaphragms can be replaced with Cicada CRT075 service diaphragms instead of replacing the complete tweeter assembly. Key Specifications Manufacturer Cicada Audio Manufacturer SKU 24CHDRGGTK-075 Legacy GBS SKU Reference 24CHDRGGTK Product Type Road Glide fairing grille and horn tweeter kit Vehicle Application Compatible 2023.5 CVO and 2024+ Harley-Davidson Road Glide Quantity Matched left and right pair Tweeter Model Cicada Audio RR075T Tweeter Type 0.75-inch ring-radiator horn tweeter Nominal Impedance 4Ω per tweeter Power Handling Per Tweeter 50W RMS / 100W maximum Power Handling Per Pair 100W RMS / 200W maximum Diaphragm One-inch aluminum diaphragm Voice Coil High-temperature aluminum voice-coil design Magnet N35 neodymium Basket Heavy-duty die-cast aluminum Sensitivity 107 dB at 1W/1m Frequency Response 2 kHz–20 kHz ±5 dB Crossover External 12 dB crossover in a vented enclosure Grille Design Road Glide-specific precision-punched kidney grilles Grille Finish Powder-coated metal Mounting Depth 1.13 inches / 28.9 mm Mounting Diameter 2 inches / 50 mm Replacement Diaphragm Cicada Audio CRT075, sold separately RR075T Ring-Radiator Horn Tweeters The RR075T is a compact horn tweeter designed to deliver efficient high-frequency projection from limited motorcycle fairing space. Its aluminum diaphragm and high-temperature voice coil provide crisp output, while the N35 neodymium motor keeps the assembly compact and lightweight. 50W RMS Per Tweeter The current manufacturer rating provides a reliable amplifier matching reference for each 4-ohm driver. 107 dB Sensitivity High efficiency allows the tweeters to produce strong output from appropriately matched amplifier power. 2 kHz–20 kHz Response The broad upper-frequency range supports vocal detail, percussion definition and high-frequency sparkle. Use the supplied crossover protection: Do not connect either RR075T directly to an unfiltered full-range or mid-bass amplifier channel. Amplifier and Crossover Matching Each RR075T presents a nominal 4-ohm load and handles 50 watts RMS. Amplifier gain and crossover settings must be configured around the tweeter’s continuous-power rating rather than its maximum rating. Use one protected output path for each tweeter. Install the supplied 12 dB crossover protection. Do not send unfiltered midrange or bass frequencies to the tweeters. Verify positive and negative polarity on both sides. Secure crossover components away from direct moisture and vibration. Limit clean amplifier output to the tweeters’ RMS capability. Do not use amplifier gain as a volume control. Reduce output if harshness, distortion or mechanical noise occurs. System balance matters: Match the tweeter output to the front mid-bass or full-range speakers. Excessive tweeter gain can create an overly bright and poorly integrated front soundstage. Installation and Mounting Notes Remove the Road Glide fairing according to the motorcycle service procedure. Confirm left and right kidney-grille orientation before installation. Verify tweeter and crossover clearance inside the fairing. Protect wiring from steering movement, heat and sharp edges. Secure each crossover so it cannot move or contact the fairing. Confirm tweeter polarity before reinstalling the outer fairing. Test the complete audio system at low volume before final assembly. Confirm grille alignment and fastener engagement before riding. Best For 2023.5 CVO Road Glide high-frequency upgrades 2024+ Road Glide fairing audio systems Cicada Audio component speaker systems High-output motorcycle mid-bass systems needing dedicated tweeters Replacing universal tweeter mounts with model-specific grilles Improving vocal detail and highway-speed clarity Custom Road Glide DSP and amplifier systems Fitment and Ordering Notes Sold as one matched left and right grille-and-tweeter pair. Designed for compatible late-model Road Glide fairings. Not designed for Street Glide fairing grille locations. Mid-bass and full-range speakers are not included. An amplifier and speaker wiring are not included. Factory-radio or aftermarket signal integration is not included. The external crossover protection must be installed. Confirm fairing fitment and current speaker configuration before ordering. Confirm amplifier power and gain settings before playing the system. Current Shipping Promotion Enter code ShipOne at checkout for eligible free shipping. Current checkout requirements and product exclusions apply. Related Motorcycle Audio Categories Road Glide and Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Motorcycle Speakers Cicada Audio Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Road Glide Grille and Tweeter FAQ What is included with the 24CHDRGGTK-075? The package includes a matched pair of Road Glide kidney grilles, two Cicada RR075T horn tweeters and external crossover protection. Is 24CHDRGGTK-075 the current manufacturer SKU? Yes. Cicada currently identifies the complete 2024+ Road Glide grille and RR075T tweeter package as 24CHDRGGTK-075. Does this kit include 6.5-inch speakers? No. This kit adds grille-mounted horn tweeters. Mid-bass or full-range fairing speakers must be installed separately. What motorcycles does it fit? It is designed for compatible 2023.5 CVO Road Glide and 2024 or newer Harley-Davidson Road Glide fairings. Will it fit a Street Glide? No. The Street Glide uses a different fairing and grille design. What impedance are the tweeters? Each RR075T tweeter has a nominal impedance of 4 ohms. How much power does each RR075T handle? Each tweeter is currently rated for 50 watts RMS and 100 watts maximum. What is the total power rating for the pair? The matched pair is rated for 100 watts RMS and 200 watts maximum. What is the frequency response? Cicada specifies a frequency response of 2 kHz through 20 kHz, within plus or minus 5 dB. Are crossovers included? The package includes external 12 dB crossover protection in a vented enclosure design. Can the tweeters be connected directly to an amplifier? No. The crossover protection must remain in the signal path to prevent damaging lower frequencies from reaching the tweeters. Can the tweeter diaphragms be replaced? Yes. Cicada offers the CRT075 replacement diaphragm separately for servicing the RR075T tweeter. Is professional installation recommended? Yes. Correct fairing removal, crossover placement, polarity, amplifier matching, wiring and gain setup are important for reliable performance. Need Help Matching This Road Glide Tweeter Kit? Garage Bagger Stereo can help verify Road Glide fitment, 4-ohm impedance selection, amplifier matching, grille and crossover mounting, speaker wiring and factory or aftermarket signal integration before installation. Installation Services Request a Custom BuildSale -
Cicada Audio 24CHDSGGTK-05 Street Glide Grilles with RR05T Tweeters
Vendor:Cicada Audio2023.5+ CVO / 2024+ STREET GLIDE AUDIO Cicada Audio 24CHDSGGTK-05 Street Glide Grilles with RR05T Tweeters Add stronger high-frequency projection to a compatible late-model Harley-Davidson Street Glide with model-specific Cicada Audio fairing grilles loaded with RR05T horn tweeters. Each 4-ohm tweeter uses a titanium dome, neodymium motor and supplied external crossover to produce clear, efficient highs that cut through wind, engine and road noise. See Everything Included View Specifications Street Glide Tweeter Upgrade Street Glide-specific fairing grille design Matched left and right grille pair Two Cicada Audio RR05T tweeters 4-ohm impedance per tweeter 40W RMS / 80W maximum published power handling Titanium tweeter domes Neodymium magnet structures 99 dB sensitivity 3 kHz–20 kHz frequency response External 7 kHz/12 dB crossovers Powder-coated steel grilles All-weather motorcycle construction Sold as a matched pair High-Frequency Upgrade for the Late-Model Street Glide The Cicada Audio 24CHDSGGTK-05 combines custom Street Glide fairing grilles, dedicated tweeter mounts, two RR05T tweeters and their required crossover networks into one vehicle-specific high-frequency upgrade. The RR05T tweeters are engineered to improve vocal detail, cymbal definition and upper-frequency projection in open-air motorcycle audio systems. Their efficient 99 dB sensitivity helps produce strong output without requiring excessive amplifier power. Powder-coated steel grilles protect the tweeters while maintaining a clean, factory-style installation in compatible Street Glide fairings. Tweeter kit only: This package does not include 6.5-inch mid-bass or full-range speakers. The tweeters must be used with the supplied crossovers and properly matched front speakers and amplification. Harley-Davidson Fitment 2023.5+ CVO Street Glide Intended for compatible late-production CVO Street Glide fairings using the redesigned grille configuration. 2024+ Street Glide Designed around compatible 2024 and newer Harley-Davidson Street Glide fairing grille locations. Street Glide-specific fitment: This is not the Road Glide grille configuration. Confirm the motorcycle year, exact model, trim, fairing design and existing audio equipment before ordering. Everything Included Left Street Glide Fairing Grille One powder-coated steel grille with an integrated mount for the supplied Cicada RR05T tweeter. Right Street Glide Fairing Grille One matching right-side grille engineered for a balanced, factory-clean fairing installation. Two Cicada RR05T Tweeters One matched pair of 4-ohm horn tweeters with titanium domes and neodymium magnet structures. External Crossover Networks Two custom-tooled, vented 7 kHz/12 dB crossover networks that filter and protect the tweeters. Why Riders Choose the 24CHDSGGTK-05 Vehicle-Specific Grilles Custom grille geometry delivers a cleaner installation than a universal surface-mounted tweeter arrangement. Strong Highway Projection High sensitivity helps preserve vocal and high-frequency detail at highway listening levels. Titanium Dome The rigid tweeter diaphragm supports crisp, detailed high-frequency reproduction. Neodymium Motor A compact, lightweight magnet structure provides efficient output without excessive fairing weight. Protected Crossover The supplied external network filters frequencies below the tweeter’s intended operating range. All-Weather Design Materials are selected for vibration, heat and exposed motorcycle operating conditions. Key Specifications Manufacturer Cicada Audio Manufacturer SKU 24CHDSGGTK-05 Product Type Street Glide fairing grille and tweeter kit Vehicle Application Compatible 2023.5+ CVO and 2024+ Street Glide Quantity Matched left and right pair Tweeter Model Cicada Audio RR05T Nominal Impedance 4Ω per tweeter Published Power Handling 40W RMS / 80W maximum Tweeter Dome Titanium Voice Coil 19 mm high-temperature design Magnet Neodymium Sensitivity 99 dB at 1W/1m Frequency Response 3 kHz–20 kHz ±3 dB External Crossover 7 kHz / 12 dB per octave Grille Material Powder-coated steel Flush Mounting Depth 0.85 inch / 21.7 mm Flush Mounting Diameter 1.75 inches / 38.1 mm Surface Mounting Protrusion 1.1 inches / 28 mm Surface Mounting Diameter 1.8 inches / 46.1 mm Warranty Two years through Cicada Audio Amplifier and Crossover Matching The RR05T tweeters must receive a filtered high-frequency signal. Always install the supplied 7 kHz crossover networks between the amplifier output and the tweeters. Use one crossover network for each tweeter. Do not connect either tweeter directly to full-range amplifier power. Verify positive and negative polarity on both sides. Secure each crossover where it is protected from water and vibration. Match amplifier output to the published tweeter power handling. Reduce gain immediately if the tweeters sound harsh or distorted. Confirm that the existing front speakers can blend with a 7 kHz tweeter crossover. System matching matters: Adding high-frequency output without balancing the mid-bass speakers, amplifier gain and crossover response can create an overly bright or poorly integrated front stage. Installation Resources Street Glide Fairing Access 2024+ Street Glide Fairing Removal Speaker System Planning Shop Motorcycle Speakers Shop Motorcycle Amplifiers Shop Cicada Audio Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Fitment and Ordering Notes Sold as one matched left and right grille-and-tweeter pair. Designed for compatible late-model Street Glide fairings. Not designed for Road Glide fairing grille locations. Mid-bass and full-range speakers are not included. Amplifier, speaker wiring and signal integration are not included. Both external crossover networks must be installed. Confirm fairing fitment and current speaker configuration before ordering. Confirm amplifier output and gain settings before playing the system. Current Shipping Promotion Enter code ShipOne at checkout for eligible free shipping. Current checkout requirements and exclusions apply. Related Motorcycle Audio Categories Late-Model Harley Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Motorcycle Speakers Cicada Audio Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Street Glide Grille and Tweeter FAQ What is included with the 24CHDSGGTK-05? The package includes a matched pair of Street Glide fairing grilles, two Cicada RR05T tweeters and two external crossover networks. Does this kit include 6.5-inch speakers? No. This package adds grille-mounted tweeters only. Mid-bass or full-range fairing speakers must already be installed or purchased separately. What motorcycles does it fit? It is designed for compatible 2023.5+ CVO Street Glide and 2024+ Harley-Davidson Street Glide fairings. Will it fit a Road Glide? No. The Road Glide uses a different fairing and grille configuration. What impedance are the tweeters? Each RR05T tweeter has a nominal impedance of 4 ohms. How much power do the tweeters handle? Cicada publishes 40 watts RMS and 80 watts maximum power handling. Are crossovers included? Yes. Two external 7 kHz/12 dB crossover networks are included. Can the tweeters be connected directly to an amplifier? No. The supplied crossover networks must be installed to prevent damaging low frequencies from reaching the tweeters. Are the grilles sold separately from the tweeters? This SKU is the complete grille-and-tweeter package. Cicada also offers grille-only versions under separate part numbers. Is professional installation recommended? Yes. Correct fairing removal, crossover mounting, wiring polarity, amplifier matching and gain setup are important for reliable performance. Need Help Matching This Street Glide Tweeter Kit? Garage Bagger Stereo can help verify motorcycle fitment, 4-ohm impedance selection, amplifier matching, grille and crossover mounting, speaker wiring and factory or aftermarket signal integration before installation. Installation Services Request a Custom Build -
SaleCicada Audio 24CXK65 6.5" Component Speaker Kit for 2024+ Road Glide | 2Ω or 4Ω
Vendor:Cicada Audio2024+ ROAD GLIDE COMPONENT AUDIO Cicada Audio 24CXK65 6.5" Component Speaker Kit for 2024+ Road Glide | 2Ω or 4Ω The Cicada Audio 24CXK65 is a complete component speaker upgrade available in 2Ω and 4Ω versions for factory speaker locations on 2024 and newer Harley-Davidson Road Glide models. Each kit combines high-output 6.5-inch Carbon Matrix Composite mid-bass drivers, shallow ring-radiator horn tweeters, external crossovers and Road Glide-specific grille integration. Choose Impedance View Specifications High-Output Road Glide Front Stage Designed for 2024+ Harley-Davidson Road Glide Available with 2Ω or 4Ω mid-bass drivers Two 6.5-inch Carbon Matrix Composite drivers 250 watts RMS per mid-bass driver Separate 4Ω shallow horn tweeters Road Glide grille-mounted tweeter design External 12dB crossovers at 7kHz -3dB / -6dB tweeter attenuation capability Rain or Shine™ all-weather performance design Cicada 24CXK65 Road Glide Kit Overview The Cicada Audio 24CXK65 is built for Road Glide riders who want more output, stronger mid-bass and clearer high-frequency detail than a factory speaker or basic coaxial speaker replacement can provide. This component system separates the 6.5-inch mid-bass drivers from the shallow ring-radiator horn tweeters. The tweeters mount in Road Glide-specific grille assemblies, helping create a more focused front soundstage while preserving the factory speaker locations. Select the 24CXK65.2RG 2Ω version or the 24CXK65.4RG 4Ω version based on your amplifier, channel configuration and final system impedance. Available Impedance Options and SKUs 24CXK65.2RG — 2-Ohm Version Includes 2Ω 6.5-inch mid-bass drivers. Select this version when your amplifier is stable at the intended 2-ohm channel load and the speaker wiring is designed for the lower impedance. 24CXK65.4RG — 4-Ohm Version Includes 4Ω 6.5-inch mid-bass drivers. Select this version for amplifiers and multi-speaker configurations designed around a 4-ohm channel load. Choose the correct impedance: The proper version depends on your amplifier’s rated impedance, the number of speakers connected to each channel and the final wiring configuration. What Comes in the Kit Two Cicada Audio 6.5-inch mid-bass drivers in the selected 2Ω or 4Ω configuration Two 4Ω shallow ring-radiator horn tweeters Road Glide grille assemblies with integrated tweeter locations Two external 12dB / 7kHz component crossovers -3dB / -6dB tweeter attenuation capability Why Riders Choose This Kit Road Glide-Specific Design Designed around factory speaker locations on 2024 and newer Harley-Davidson Road Glide models. 250W RMS Mid-Bass Drivers The 6.5-inch drivers are built for substantial amplifier power and stronger mid-bass output in open-air motorcycle riding conditions. 2Ω or 4Ω Variants Two impedance options allow the component kit to be matched to different amplifiers, channel loads and system configurations. Grille-Mounted Horn Tweeters The Road Glide grille assemblies position the shallow horn tweeters for focused high-frequency output and clearer highway listening. External Crossovers Separate 12dB crossovers control the transition between the mid-bass drivers and tweeters while providing attenuation options. All-Weather Construction Rain or Shine™ construction supports motorcycle use and changing riding conditions. Mid-Bass Driver Technology Carbon Matrix Composite™ cone provides a lightweight, rigid and efficient speaker diaphragm OFC copper shorting ring helps extend high-frequency performance from the mid-bass driver OFC copper Black Coat™ voice coil supports high conductivity, low resistance and extreme thermal performance N35SH neodymium motor provides strong output from a compact and lightweight motor structure Die-cast aluminum basket features Cicada Audio Vortex Flow Venting™ 6.5-Inch Mid-Bass Specifications Available Models 24CXK65.2RG and 24CXK65.4RG Driver Type 6.5-inch mid-bass driver Impedance Options 2Ω or 4Ω 2Ω Variant SKU 24CXK65.2RG 4Ω Variant SKU 24CXK65.4RG Power Handling 250W RMS / 500W maximum Voice Coil 2 inches / 51mm Cone Carbon Matrix Composite™ Magnet N35SH neodymium Sensitivity 94dB, 1W / 1M Frequency Response 70Hz–20kHz ±3dB Mounting Depth 2.64 inches / 67mm Mounting Diameter 5.67 inches / 144mm Horn Tweeter and Crossover Specifications Tweeter Type 1-inch shallow ring-radiator horn tweeter Tweeter Impedance 4Ω with both kit variants Power Handling 200W RMS / 400W maximum Voice Coil 1 inch / 25mm Tweeter Dome Aluminum Magnet Neodymium Sensitivity 107dB, 1W / 1M Frequency Response 2kHz–20kHz ±3dB Mounting Depth 0.75 inch / 18mm Mounting Diameter 2 inches / 50mm Crossover External 12dB crossover at 7kHz Tweeter Attenuation -3dB / -6dB heat-sink-encased resistor crossover Fitment and Ordering Notes Fitment: Designed for factory speaker locations on 2024 and newer Harley-Davidson Road Glide models. Verify your exact year, trim, factory audio configuration, available mounting depth, connector requirements and amplifier impedance before ordering. Select 24CXK65.2RG for the 2Ω mid-bass version. Select 24CXK65.4RG for the 4Ω mid-bass version. Both versions include 4Ω horn tweeters. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Confirm crossover placement and available fairing space before installation. Set amplifier gains only after all speakers and crossovers are connected. Professional installation and system tuning are recommended. Best For 2024+ Harley-Davidson Road Glide upper-fairing audio upgrades Riders replacing factory Road Glide speakers with a component system Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker builds requiring a specific final channel impedance Systems needing stronger mid-bass and clearer high-frequency output Road Glide builds using separate mid-bass drivers and horn tweeters Related Motorcycle Audio Categories Cicada and Road Glide Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Installation Parts Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada 24CXK65 Road Glide FAQ What motorcycles does the 24CXK65 fit? It is designed for factory speaker locations on 2024 and newer Harley-Davidson Road Glide models. Exact trim and factory audio configuration should be confirmed before ordering. Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select 24CXK65.2RG for the 2Ω mid-bass kit or 24CXK65.4RG for the 4Ω mid-bass kit before adding the product to your cart. Are the included tweeters 2Ω or 4Ω? The shallow ring-radiator horn tweeters included with both kit variants are rated at 4Ω. Which impedance should I choose? Choose the impedance supported by your amplifier and overall speaker wiring plan. The 2Ω version may allow a compatible amplifier to produce more power, while the 4Ω version may be better suited to multi-speaker configurations or amplifiers designed around a 4-ohm channel load. Does the kit include Road Glide grilles? Yes. Each kit includes Road Glide grille assemblies with integrated locations for the separate horn tweeters. Does the kit include mid-bass speakers and tweeters? Yes. Each kit includes a pair of 6.5-inch mid-bass drivers, a pair of shallow ring-radiator horn tweeters and external crossovers. Does this component kit need an amplifier? A properly matched motorcycle amplifier that is stable at the selected speaker impedance is recommended to take advantage of the system’s power handling and output capability. Are the external crossovers included? Yes. External 12dB / 7kHz crossovers with tweeter attenuation options are included. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for both versions of this component speaker kit. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your Road Glide year, trim, factory audio system, amplifier and planned speaker wiring. We’ll help determine which 24CXK65 impedance is correct and recommend the proper supporting equipment for your build. Call 864-334-6131 Ask GBS for HelpSale -
SaleCicada Audio 24CXK65 6.5" Component Speaker Kit for 2024+ Street Glide | 2Ω or 4Ω
Vendor:Cicada Audio2024+ STREET GLIDE COMPONENT AUDIO Cicada Audio 24CXK65 6.5" Component Speaker Kit for 2024+ Street Glide | 2Ω or 4Ω The Cicada Audio 24CXK65 is a complete component speaker upgrade available in 2Ω and 4Ω versions for factory speaker locations on 2024 and newer Harley-Davidson Street Glide models. Each kit combines high-output 6.5-inch Carbon Matrix Composite mid-bass drivers, shallow ring-radiator horn tweeters, external crossovers and Street Glide-specific integration components. Choose Impedance View Specifications High-Output Street Glide Front Stage Designed for 2024+ Harley-Davidson Street Glide Available with 2Ω or 4Ω mid-bass drivers Two 6.5-inch Carbon Matrix Composite drivers 250 watts RMS per mid-bass driver Separate 4Ω shallow horn tweeters External 12dB crossovers at 7kHz -3dB / -6dB tweeter attenuation capability Rain or Shine™ all-weather performance design Cicada 24CXK65 Street Glide Kit Overview The Cicada Audio 24CXK65 is built for Street Glide riders who want more output, stronger mid-bass and clearer high-frequency detail than a factory speaker or basic coaxial speaker replacement can provide. This component system separates the 6.5-inch mid-bass drivers from the shallow ring-radiator horn tweeters. The separate tweeter placement helps create a more focused front soundstage while maintaining the factory speaker locations of the 2024 and newer Street Glide fairing. Select the 24CXK65.2SG 2Ω version or the 24CXK65.4SG 4Ω version based on your amplifier, channel configuration and final system impedance. Available Impedance Options and SKUs 24CXK65.2SG — 2-Ohm Version Includes 2Ω 6.5-inch mid-bass drivers. Select this version when your amplifier is stable at the intended 2-ohm channel load and your system wiring is designed for the lower impedance. 24CXK65.4SG — 4-Ohm Version Includes 4Ω 6.5-inch mid-bass drivers. Select this version for amplifiers and multi-speaker configurations designed around a 4-ohm channel load. Choose the correct impedance: The proper version depends on your amplifier’s rated impedance, the number of speakers connected to each channel and the final wiring configuration. What Comes in the Kit Two Cicada Audio 6.5-inch mid-bass drivers in the selected 2Ω or 4Ω configuration Two 4Ω shallow ring-radiator horn tweeters Street Glide-specific tweeter and grille integration components Two external 12dB / 7kHz component crossovers -3dB / -6dB tweeter attenuation capability Why Riders Choose This Kit Street Glide-Specific Design Designed around factory speaker locations on 2024 and newer Harley-Davidson Street Glide models. 250W RMS Mid-Bass Drivers The 6.5-inch drivers are built for substantial amplifier power and stronger mid-bass output in open-air motorcycle riding conditions. 2Ω or 4Ω Variants Two impedance options allow the component kit to be matched to different amplifiers, channel loads and system configurations. High-Efficiency Horn Tweeters Shallow ring-radiator horn tweeters deliver high sensitivity and focused high-frequency output for clearer highway listening. External Crossovers Separate 12dB crossovers control the transition between the mid-bass drivers and tweeters while providing attenuation options. All-Weather Construction Rain or Shine™ construction supports motorcycle use and changing riding conditions. Mid-Bass Driver Technology Carbon Matrix Composite™ cone provides a lightweight, rigid and efficient speaker diaphragm OFC copper shorting ring helps extend high-frequency performance from the mid-bass driver OFC copper Black Coat™ voice coil supports high conductivity, low resistance and extreme thermal performance N35SH neodymium motor provides strong output from a compact and lightweight motor structure Die-cast aluminum basket features Cicada Audio Vortex Flow Venting™ 6.5-Inch Mid-Bass Specifications Available Models 24CXK65.2SG and 24CXK65.4SG Driver Type 6.5-inch mid-bass driver Impedance Options 2Ω or 4Ω 2Ω Variant SKU 24CXK65.2SG 4Ω Variant SKU 24CXK65.4SG Power Handling 250W RMS / 500W maximum Voice Coil 2 inches / 51mm Cone Carbon Matrix Composite™ Magnet N35SH neodymium Sensitivity 94dB, 1W / 1M Frequency Response 70Hz–20kHz ±3dB Mounting Depth 2.64 inches / 67mm Mounting Diameter 5.67 inches / 144mm Horn Tweeter and Crossover Specifications Tweeter Type 1-inch shallow ring-radiator horn tweeter Tweeter Impedance 4Ω with both kit variants Power Handling 200W RMS / 400W maximum Voice Coil 1 inch / 25mm Tweeter Dome Aluminum Magnet Neodymium Sensitivity 107dB, 1W / 1M Frequency Response 2kHz–20kHz ±3dB Mounting Depth 0.75 inch / 18mm Mounting Diameter 2 inches / 50mm Crossover External 12dB crossover at 7kHz Tweeter Attenuation -3dB / -6dB heat-sink-encased resistor crossover Fitment and Ordering Notes Fitment: Designed for factory speaker locations on 2024 and newer Harley-Davidson Street Glide models. Verify your exact year, trim, factory audio configuration, available mounting depth, connector requirements and amplifier impedance before ordering. Select 24CXK65.2SG for the 2Ω mid-bass version. Select 24CXK65.4SG for the 4Ω mid-bass version. Both versions include 4Ω horn tweeters. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Confirm crossover placement and available fairing space before installation. Set amplifier gains only after all speakers and crossovers are connected. Professional installation and system tuning are recommended. Best For 2024+ Harley-Davidson Street Glide upper-fairing audio upgrades Riders replacing factory Street Glide speakers with a component system Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker builds requiring a specific final channel impedance Systems needing stronger mid-bass and clearer high-frequency output Street Glide builds using separate mid-bass drivers and horn tweeters Related Motorcycle Audio Categories Cicada and Street Glide Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Installation Parts Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada 24CXK65 Street Glide FAQ What motorcycles does the 24CXK65 fit? It is designed for factory speaker locations on 2024 and newer Harley-Davidson Street Glide models. Exact trim and factory audio configuration should be confirmed before ordering. Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select 24CXK65.2SG for the 2Ω mid-bass kit or 24CXK65.4SG for the 4Ω mid-bass kit before adding the product to your cart. Are the included tweeters 2Ω or 4Ω? The shallow ring-radiator horn tweeters included with both kit variants are rated at 4Ω. Which impedance should I choose? Choose the impedance supported by your amplifier and overall speaker wiring plan. The 2Ω version may allow a compatible amplifier to produce more power, while the 4Ω version may be better suited to multi-speaker configurations or amplifiers designed around a 4-ohm channel load. Does the kit include mid-bass speakers and tweeters? Yes. Each kit includes a pair of 6.5-inch mid-bass drivers, a pair of shallow ring-radiator horn tweeters and external component crossovers. Does this component kit need an amplifier? A properly matched motorcycle amplifier that is stable at the selected speaker impedance is recommended to take advantage of the system’s power handling and output capability. Are the external crossovers included? Yes. External 12dB / 7kHz crossovers with tweeter attenuation options are included. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for both versions of this component speaker kit. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your Street Glide year, trim, factory audio system, amplifier and planned speaker wiring. We’ll help determine which 24CXK65 impedance is correct and recommend the proper supporting equipment for your build. Call 864-334-6131 Ask GBS for HelpSale -
SaleCicada Audio CHX65 6.5" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX65 6.5" Pro Coax Horn Speakers Cicada Audio CHX65 6.5" Pro Coax Horn Speakers are built for Harley-Davidson bagger audio systems that need loud, clean, all-weather motorcycle sound at highway speed. Designed for high-output motorcycle audio, the CHX65 combines a 6.5" pro coaxial driver, horn-loaded clarity, Carbon Matrix Composite cone construction, and strong projection for riders who want more output from their Harley audio system. Shop Cicada Audio 6.5" Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD All-Weather 6.5" Cicada Speakers for Harley Audio Built for riders who want loud vocals, sharper clarity, stronger projection, and real motorcycle audio performance from a 6.5" Harley speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CHX65 6.5" Pro Coax Horn Speakers Current Part Numbers CHX65.2 = 2Ω version / CHX65.4 = 4Ω version Speaker Size 6.5" Speaker Type Pro coaxial horn speaker Best For Harley-Davidson bagger audio, fairing speaker upgrades, high-output motorcycle audio systems, and amplified 6.5" speaker locations System Goal Louder vocals, stronger projection, clean open-air output, all-weather durability, and better highway-speed performance Sold As Pair Always verify impedance, speaker location, mounting depth, amplifier power, wiring, crossover setup, and final fitment before ordering for your Harley-Davidson audio build. Built for Harley-Davidson Bagger Audio The Cicada CHX65 is made for riders who want more than a basic replacement speaker. It is built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and custom bagger audio systems that need louder output, cleaner vocals, better clarity, and strong projection in real riding conditions. With a horn-loaded design, all-weather protection, high-efficiency output, and motorcycle-focused construction, the CHX65 is a strong fit for amplified Harley audio systems where the speaker needs to perform at speed, not just sound good in the garage. All-Weather Pro Coax Horn Design The CHX65 uses Cicada’s all-weather design with a Nanofram horn cover, Carbon Matrix Composite cone, neodymium magnet structure, aluminum tweeter diaphragm, and external crossover network. This makes it a strong speaker choice for Harley riders who want loud, clear, reliable motorcycle audio in real-world riding conditions. The included horn cover helps protect the compression driver, while the pro coaxial layout gives the speaker the projection and efficiency needed for open-air Harley audio builds. Specifications Speaker Size 6.5" pro coaxial horn driver Impedance Options CHX65.2 = 2Ω / CHX65.4 = 4Ω Power Handling 300 watts RMS / 600 watts max Frequency Response 70Hz–20kHz +/-4dB Sensitivity 92dB, 1W / 1M Midbass Voice Coil 2.0" / 51mm high-temperature voice coil Tweeter Voice Coil 1.4" / 35.56mm tweeter voice coil Cone Carbon Matrix Composite™ cone Tweeter Dome Aluminum tweeter diaphragm Magnet Neodymium magnet structure Crossover External 12dB custom-tooled, vented, encased crossover Tweeter Attenuation -3dB / -6dB heat-sink encased resistor pack Horn Cover Nanofram™ horn cover Weather Protection Exclusive Cicada all-weather design for rain protection, waterproofing, and UV protection Mounting Depth 2.64" / 67mm Mounting Diameter 5.67" / 144mm Best Use for the Cicada CHX65 The CHX65 is best used in Harley-Davidson bagger audio systems where the goal is loud 6.5" speaker output, strong vocal projection, clean highs, and better performance from fairing or custom speaker locations. Amplified System Recommended These speakers are intended for serious motorcycle audio systems. For best results, match the CHX65 with proper amplifier power, correct impedance selection, clean wiring, and a real tuning plan. Fitment and Installation Notes The Cicada CHX65 is designed for 2014+ Harley-Davidson factory-designed speaker locations, but every motorcycle audio build should be verified before ordering. Confirm speaker depth, mounting diameter, pod clearance, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, and custom bagger applications may require installation planning, speaker pod work, adapter rings, or system tuning depending on the exact bike and audio layout. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CHX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Pro Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CHX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio CM65X 6.5" Mid-Bass Component Speakers with CMC Cones (Pair)
Vendor:Cicada AudioCicada Audio CM65X 6.5-inch Mid-Bass Component Speakers with CMC™ Cones FEATURES Designed exclusively for 2014 to current H-D® factory designed locations Rain or Shine™ all weather performance design OFC Copper shorting ring for extended high frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty SPECIFICATIONS 4Ω / 6.5-inch mid-bass driver Power Handling: 250W RMS / 500W MAX Voice Coil: 2-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 10 kHz +/- 3 dB Mounting Depth: 2.3-inch/58mm Mounting Diameter: 5.7-inch/144mmSale -
SaleCicada Audio CX65 6.5" Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CX65 6.5" Coaxial Speaker Pair Cicada Audio CX65 6.5" Coaxial Speakers are built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and bagger audio systems that need clean sound, shallow fitment, weatherproof construction, and simple 6.5" speaker upgrade performance. Available in 2Ω and 4Ω versions, the CX65 gives riders a strong full-range coaxial speaker option for factory-style Harley speaker locations. Shop Cicada Audio 6.5" Coaxial Speakers Cicada Amplifiers THE REFERENCE STANDARD Shallow 6.5" Cicada Speakers for Harley Audio Built for riders who want clean full-range sound, simple factory-style fitment, weatherproof durability, and stronger output from a 6.5" Harley-Davidson speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CX65 6.5" Coaxial Speaker Pair Speaker Size 6.5" Speaker Type High-performance full-range coaxial motorcycle speaker Impedance Options 2Ω and 4Ω versions available depending on selected variant Best For Harley-Davidson Touring audio upgrades, 2014+ Harley factory-style 6.5" speaker locations, fairing speaker upgrades, and clean full-range motorcycle audio systems System Goal Clean sound, shallow fitment, better clarity, weatherproof durability, efficient output, and improved Harley bagger audio Sold As Pair Always verify impedance, speaker location, mounting depth, grille clearance, amplifier compatibility, and final fitment before ordering for your Harley-Davidson audio build. Built for 2014+ Harley-Davidson Fairing Speaker Upgrades The Cicada CX65 is designed as a strong 6.5" speaker upgrade for 2014 and later Harley-Davidson factory-style fairing speaker locations. Its shallow, low-profile design helps simplify installation while giving riders better output, cleaner clarity, and weatherproof performance compared to basic factory replacement speakers. The CX65 does not require a separate tweeter location in the fairing. The full-range coaxial design keeps the install cleaner while still giving Harley riders better sound quality, improved efficiency, and a stronger motorcycle audio foundation. Weatherproof Full-Range Coaxial Design The CX65 uses a weatherproof IMPP cone with NBR surround, high-temperature polymer frame, PEI dome tweeter, neodymium magnet structure, built-in 6dB crossover, DPSH® Dual-Phase Slot Horn design, and advanced voice coil heat sink construction. The 2Ω version can help produce more output with smaller, higher-efficiency amplifiers, while the 4Ω version gives builders another option depending on amplifier setup, system layout, and final impedance goals. Specifications Speaker Size 6.5" coaxial speaker Power Handling 100 watts RMS / 200 watts max Frequency Response 54Hz–20kHz +/-5dB Sensitivity 94dB 1W/1M average, 2.83V Magnet Structure Neodymium high-energy lightweight N35 magnet structure Cone Waterproof IMPP cone Surround NBR surround Frame / Basket Heavy-duty injected high-temperature polymer frame Midbass Voice Coil 1.4" high-temperature 2Ω or 4Ω Black Coat™ voice coil Tweeter 1.0" PEI dome tweeter with neodymium magnet Horn / Dispersion Technology DPSH® Dual-Phase Slot Horn Crossover Built-in 6dB crossover Speaker Control Shorting ring design for improved speaker control Heat Control Advanced voice coil heat sink design for improved heat dissipation Mounting Depth 2.26" / 57.4mm Mounting Diameter 5.32" / 135.1mm Outside Dimensions 6.5" / 165mm Weather Protection Weatherproof motorcycle speaker construction Sold Pair Best Use for the Cicada CX65 The CX65 is best used in Harley-Davidson Touring and bagger audio systems where riders want a shallow 6.5" coaxial speaker upgrade with clean sound, simple fitment, and weatherproof construction for daily riding. Factory-Style Speaker Locations The CX65 is a strong option for 2014+ Harley-Davidson factory-style speaker locations. Always verify speaker depth, mounting diameter, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Fitment and Installation Notes The Cicada CX65 is intended for 2014+ Harley-Davidson fairing speaker locations and factory-style 6.5" motorcycle audio upgrades. Every installation should still be verified before ordering. Confirm mounting depth, mounting diameter, grille clearance, pod fitment, wiring path, impedance, and amplifier compatibility before installation. Some Road Glide, Street Glide, CVO, Indian, and custom bagger applications may require additional installation planning depending on factory parts, speaker pods, adapters, fairing layout, or final audio system design. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio CXX65 6.5" Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CXX65 6.5" Coaxial Speaker Pair Cicada Audio CXX65 6.5" Coaxial Speakers are built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and bagger audio systems that need clean full-range output, weatherproof performance, and strong 6.5" speaker upgrade potential. The CXX65 is a high-performance coaxial speaker designed for riders who want better clarity, improved efficiency, and reliable motorcycle audio performance in factory-style Harley speaker locations. Shop Cicada Audio 6.5" Coaxial Speakers Cicada Amplifiers THE REFERENCE STANDARD Weatherproof 6.5" Cicada Speakers for Harley Audio Built for riders who want clean sound, better clarity, strong efficiency, and reliable all-weather performance from a 6.5" Harley-Davidson motorcycle speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CXX65 6.5" Coaxial Speaker Pair Speaker Size 6.5" Speaker Type High-performance full-range pro coaxial motorcycle speaker Impedance Options 2Ω and 4Ω versions available depending on selected variant Best For Harley-Davidson Touring audio upgrades, factory-style 6.5" speaker locations, fairing speaker upgrades, and clean full-range motorcycle audio systems System Goal Clean output, better clarity, efficient performance, weatherproof durability, and improved Harley bagger audio Sold As Pair Always verify impedance, speaker location, mounting depth, grille clearance, amplifier compatibility, and final fitment before ordering for your Harley-Davidson audio build. Built for Harley-Davidson Touring Audio Upgrades The Cicada CXX65 is designed for riders who want a clean, efficient 6.5" coaxial speaker upgrade for Harley-Davidson motorcycle audio systems. It is a strong option for factory-designed Harley speaker locations where riders want better sound quality, weatherproof construction, and stronger output than a basic replacement speaker. With its low-profile design, all-weather performance, built-in crossover, V8™ Dispersion Guide, and efficient coaxial layout, the CXX65 is built to deliver clear sound in real motorcycle riding conditions. Weatherproof Full-Range Coaxial Design The CXX65 uses Cicada’s Rain or Shine™ all-weather performance design with moisture-resistant speaker materials, UV protection over all surfaces, a PEI tweeter dome, Kevlar cone construction, neodymium magnet structure, and a high-temperature resistant polycarbonate basket. The built-in 6dB crossover and V8™ Dispersion Guide help improve tweeter dispersion and speaker performance for motorcycle audio systems where sound needs to remain clear while the bike is moving. Specifications Speaker Size 6.5" coaxial speaker Power Handling 100 watts RMS / 200 watts max Frequency Response 55Hz–20kHz +/-3dB Sensitivity 93dB 1W/1M average, 2.83V Magnet Structure Neodymium high-energy lightweight magnet structure Cone Kevlar cone with moisture-resistant construction Surround NBR surround Frame / Basket High-temperature resistant polycarbonate custom-tooled basket Midbass Voice Coil 1.4" / 35mm voice coil Tweeter Voice Coil 1.0" / 25mm tweeter voice coil Tweeter Dome PEI tweeter dome Tweeter Design V8™ Dispersion Guide for 360-degree tweeter sound dispersion Horn / Dispersion Technology DPSH® Dual-Phase Slot Horn Crossover Built-in 6dB crossover Speaker Control Shorting ring design for improved speaker control Heat Control Advanced voice coil heat sink design for improved heat dissipation Mounting Depth 2.26" / 57.4mm Mounting Diameter 5.32" / 135.1mm Outside Dimensions 6.5" / 165mm Weather Protection Rain or Shine™ all-weather performance design with UV protection over all surfaces Included 5" grilles and hardware Warranty Two-year warranty Sold Pair Best Use for the Cicada CXX65 The CXX65 is best used in Harley-Davidson Touring and bagger audio systems where riders want a clean 6.5" coaxial speaker upgrade with strong clarity, efficient output, and weatherproof construction for daily riding. Factory-Style Speaker Locations The CXX65 is designed for 2014+ Harley-Davidson factory-designed speaker locations. Always verify mounting depth, speaker clearance, grille fitment, impedance, and amplifier compatibility before installation. Fitment and Installation Notes The Cicada CXX65 is designed for 1998+ Harley-Davidson factory-designed speaker locations, but every motorcycle audio build should be verified before ordering. Confirm speaker depth, mounting diameter, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, and custom bagger applications may require additional installation planning depending on the speaker location, factory parts, pods, adapters, and final audio system layout. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CXX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CXX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio CXXM65 6.5" Mid-Bass Speakers | 2Ω or 4Ω – Pair
Vendor:Cicada AudioHIGH-OUTPUT 6.5-INCH MOTORCYCLE MID-BASS Cicada Audio CXXM65 6.5" Mid-Bass Speakers | 2Ω or 4Ω – Pair The Cicada Audio CXXM65 is a high-output 6.5-inch mid-bass speaker pair available in 2Ω and 4Ω versions for motorcycle audio systems. Each speaker combines a moisture-resistant Kevlar® cone, efficient neodymium motor, high-sensitivity design and shallow mounting depth for tight, responsive mid-bass in demanding open-air installations. Choose Impedance View Specifications Responsive Motorcycle Mid-Bass Available in 2Ω and 4Ω configurations Sold as a matched pair 100 watts RMS per speaker 200 watts maximum per speaker Lightweight Kevlar® cones N45H neodymium magnet motors Shallow 2.26-inch mounting depth 6.5-inch grilles and hardware included Rain or Shine™ all-weather construction Cicada CXXM65 Mid-Bass Speaker Overview The Cicada Audio CXXM65 is designed for motorcycle audio systems that need clean, punchy mid-bass without the depth and weight of a conventional automotive woofer. Its lightweight Kevlar® cone is engineered to remain rigid while resisting heat and moisture. Combined with an efficient neodymium motor and 92dB sensitivity, the CXXM65 delivers responsive mid-bass from a properly matched motorcycle amplifier. Select the CXXM65.2 2Ω version or the CXXM65.4 4Ω version based on your amplifier, speaker wiring and final channel impedance requirements. Available Impedance Options and SKUs CXXM65.2 — 2-Ohm Version Select the 2Ω version when your amplifier is stable at the intended 2-ohm channel load and the speaker wiring is designed for the lower impedance. CXXM65.4 — 4-Ohm Version Select the 4Ω version for amplifiers and multi-speaker configurations designed around a 4-ohm channel load. Choose the correct impedance: Your selection must match the amplifier’s rated load, the number of speakers connected to each channel and the final series or parallel wiring configuration. What Comes in the Box Two Cicada Audio CXXM65 6.5-inch mid-bass speakers Selected 2Ω or 4Ω speaker configuration Two protective 6.5-inch speaker grilles Speaker installation hardware Important: Motorcycle-specific speaker adapters, fairing brackets, saddlebag rings, wiring harnesses and amplifier installation components are not included unless specifically added as product options. Why Riders Choose the CXXM65 100W RMS Power Handling Each 6.5-inch speaker handles 100 watts RMS and 200 watts maximum for strong output from a properly matched motorcycle amplifier. 2Ω or 4Ω Variants Two impedance options allow the speakers to be matched to different amplifiers, channel loads and multi-speaker configurations. Kevlar Mid-Bass Cone The lightweight Kevlar® cone is strong, heat resistant and moisture resistant for tight, controlled mid-bass output. High-Sensitivity Design A 92dB sensitivity rating helps the CXXM65 produce clean output without requiring excessive amplifier power. Shallow Mounting Depth A 2.26-inch mounting depth supports motorcycle installations where available fairing, lower or saddlebag space is limited. All-Weather Construction Rain or Shine™ construction and UV-protected surfaces are engineered for exposed motorcycle audio environments. CXXM65 Speaker Technology Kevlar® cone provides a lightweight, rigid, high-temperature and moisture-resistant speaker diaphragm OFC copper voice coil supports efficient conductivity while helping reduce heat generation N45H neodymium motor produces strong output and high efficiency without unnecessary speaker weight Custom-tooled polycarbonate frame is engineered to withstand extreme heat in motorcycle installations UV-protected surfaces help prevent fading and damage from extended sun exposure Cicada CXXM65 Specifications Available Models CXXM65.2 and CXXM65.4 Speaker Size 6.5-inch mid-bass driver Quantity Pair Impedance Options 2Ω or 4Ω 2Ω Variant SKU CXXM65.2 4Ω Variant SKU CXXM65.4 Power Handling 100W RMS / 200W maximum per speaker Cone Material Kevlar® Magnet N45H neodymium Sensitivity 92dB, 1W / 1M Frequency Response 60Hz–5kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Grilles Included Warranty Two-year manufacturer warranty Fitment and Ordering Notes Fitment: The CXXM65 is designed for compatible custom 6.5-inch motorcycle speaker locations. Verify the speaker opening, mounting depth, grille clearance and amplifier impedance before ordering. Select CXXM65.2 for the 2Ω version. Select CXXM65.4 for the 4Ω version. Both variants are sold as a pair. Each speaker is rated for 100 watts RMS. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Verify the 2.26-inch mounting depth and 5.43-inch cutout before installation. Motorcycle-specific adapters or mounting brackets may be required. Apply the correct crossover and amplifier gain settings before extended use. Professional installation and system tuning are recommended. Best For High-output motorcycle fairing audio systems Custom 6.5-inch saddlebag speaker installations Motorcycle lower-fairing speaker locations Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker systems requiring a specific final channel impedance Riders wanting tighter mid-bass from a shallow speaker platform Related Motorcycle Audio Categories Cicada and Motorcycle Speakers Shop Cicada Audio Shop Motorcycle Speakers Motorcycle Speaker Installation Parts Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Lids Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada CXXM65 FAQ Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select CXXM65.2 for the 2Ω speaker pair or CXXM65.4 for the 4Ω speaker pair before adding the product to your cart. Are the CXXM65 speakers sold individually or as a pair? Both the CXXM65.2 and CXXM65.4 variants are sold as a pair. Which impedance should I choose? Choose the impedance supported by your amplifier and complete speaker wiring plan. The final channel load depends on the number of speakers connected and whether they are wired in series or parallel. How much power can the CXXM65 handle? Each speaker is rated for 100 watts RMS and 200 watts maximum power. Are these coaxial speakers? No. The CXXM65 is a dedicated 6.5-inch mid-bass speaker without an integrated tweeter. Are these subwoofers? No. The CXXM65 is a mid-bass speaker with a published frequency response of 60Hz–5kHz. It is not intended to replace a dedicated subwoofer. Are speaker grilles included? Yes. The pair includes two 6.5-inch protective grilles and installation hardware. Will these speakers fit factory Harley-Davidson locations? Fitment depends on the motorcycle year, speaker location, mounting opening, available depth and adapters being used. Model-specific brackets or mounting adapters may be required. Does this speaker pair need an amplifier? A properly matched motorcycle amplifier that is stable at the selected speaker impedance is recommended to take advantage of the speakers’ power handling and output capability. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for both CXXM65 impedance variants. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your motorcycle year, speaker locations, amplifier model and planned wiring. We’ll help determine which CXXM65 impedance is correct and recommend the proper mounting and installation components for your system. Call 864-334-6131 Ask GBS for HelpSale
-
Sale
Cicada Audio 23.5+ Harley Davidson Street Glide Grills w/Horns
Vendor:Speed RingsSpeed Rings 23.5 CVO+ Harley Davidson STREET GLIDE GRILL W/TWEETER Motorcycle Compression Drivers and Horns 23.5 Harley Davidson Street Glide grills from Brock Black Designs and Speed Rings RR075T – 1” SHALLOW RING RADIATOR HORN TWEETER 200WRMS/400 MAX Power Handling- PAIR Neodymium High Energy/ Light Weight N35 Magnet structure Heavy Duty/ Die-cast Aluminum Basket 4 Ohm for increased durability 1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter Advanced Voice Coil Heat Sink Design for Better Heat Dissipation Frequency Response: 2Hz -20Khz+/-5dB High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V) 12dB Crossover with custom tooled/ Vented crossover case Mounting Depth: 0.75” / 18mm Mounting Diameter: 2” / 50mm SOLD ONLY IN PAIRSSale -
Sale
Cicada Audio 24CHDLID 2024+ H‑D Saddlebag Lid 6×9 Cut‑In Kit
Vendor:Cicada Audio2024+ Harley-Davidson® 6×9 Saddlebag Lid Mounting Kit Cut-in mounting system engineered for the updated 2024+ Harley touring saddlebags View Mounting Kit Motorcycle Speaker Lids Build Consultation THE REFERENCE STANDARD Cut-In. Clamp. Seal. Angled baffle projection, waterproof sealing, and a secure top-load clamp system for real touring use. Start a Build Consultation Call 864-334-6131 Key Specifications Product Type Saddlebag Lid Cut-In Speaker Mounting Kit Application 2024+ Harley-Davidson® Touring Saddlebags (updated design) Speaker Size Supported 6×9 inch Mounting Method Cut-in, top-load baffle with clamping ring Baffle Design Angled baffle for rider-focused projection Construction Materials High-strength ASA plastic + powder-coated steel mesh grille Weather Protection Waterproof gasket system + updated lid gasket seals + rainproof lid covers Notes Speakers not included Specs summarized from manufacturer technical data. Verify fitment and follow the installation guide for proper sealing and long-term reliability. Engineered for the 2024+ Harley Touring Saddlebag Update The 2024+ Harley-Davidson® Saddlebag Lid 6×9″ Cut-In Mounting Kit is engineered specifically for the updated 2024-present Harley touring saddlebags. This kit provides a secure, weather-resistant solution for mounting full-size 6×9 speakers directly into factory saddlebag lids, featuring a precision-cut-in design. Unlike surface-mount or retrofit adapters, this system uses a unique top-load speaker baffle with a dedicated clamping ring and waterproof gasket. The three-part assembly locks the speaker securely in place while maintaining proper lid sealing and structural integrity. An optimized baffle angle projects sound upward and forward toward the rider, improving on-road clarity at speed. This design is intended for real-world touring use where rear speaker placement and projection angle directly affect audibility and system balance. The kit is constructed from high-strength, UV-resistant ASA plastic and finished with a heavy-duty powder-coated steel mesh grille. Updated gasket seals and improved waterproofing allow the use of full-depth, high-output 6×9 speakers without compromising durability or saddlebag function. This mounting kit is compatible with 2024+ Harley touring models equipped with electric-lock saddlebags and supports advanced rear-audio systems when paired with appropriate amplification and tuning. Speakers are not included. Fitment verification and adherence to the installation guide are required. Full Product Specifications Product Type Saddlebag Lid Cut-In Speaker Mounting Kit Application 2024+ Harley-Davidson® Touring Saddlebags (updated design) Speaker Size Supported 6×9 inch Mounting Method Cut-in, top-load baffle with clamping ring Baffle Design Angled baffle for rider-focused projection Construction Materials High-strength ASA plastic; heavy-duty powder-coated steel mesh grille Weather Protection Waterproof gasket system; updated lid gasket seals; rainproof lid covers included Compatibility Cicada 6×9 speakers; Cicada hard divider; Cicada tweeter bridge; Cicada 24RING10; Cicada 24PORT3; Cicada 8″ and 10″ mid-bass drivers; electric-lock saddlebags What’s Included • Speaker grilles and angled baffles • Clamping rings with gaskets • ABS cutout templates • Updated lid gasket seals • Rainproof lid covers • Cicada tethers with crossover pouch • Die-cut speaker gasketing Important Notes • Speakers not included • Verify fitment before installation • Follow the provided installation guide • Designed for full-size, full-depth 6×9 speakersSale -
Sale
Cicada Audio 24CHDRGG 2024+ Road Glide Grilles
Vendor:Cicada AudioCicada Audio 24CHDRGG Harley Road Glide Replacement Grills (Pair) 2024+ Road Glide Cicada Audio® Branded Grilles Description:Crafted from high-quality aluminum, these custom-built grilles are designed specifically to fit 2024 and newer Harley-Davidson Road Glide models. Each grille includes a Cicada Audio® Branded Emblems, ensuring a precise fit and clean installation. Built for durability and performance, these grilles offer a sleek, factory-style appearance while optimizing audio performance—all proudly featuring the Cicada Audio® brand.Sale -
Sale
Cicada Audio 24CHDRGGTK-075 Road Glide Grilles with RR075T Tweeters
Vendor:Cicada Audio2023.5 CVO / 2024+ ROAD GLIDE AUDIO Cicada Audio 24CHDRGGTK-075 Road Glide Grilles with RR075T Tweeters Add powerful high-frequency projection to a compatible late-model Harley-Davidson Road Glide with model-specific Cicada Audio kidney grilles loaded with RR075T ring-radiator horn tweeters. Each 4-ohm tweeter uses an aluminum diaphragm, high-temperature voice coil, neodymium motor and external crossover protection to produce efficient, detailed highs that cut through wind, engine and road noise. See Everything Included View Specifications Road Glide Fairing Tweeter Upgrade Road Glide-specific kidney grille design Matched left and right grille pair Two Cicada Audio RR075T horn tweeters 4-ohm impedance per tweeter 50 watts RMS / 100 watts maximum per tweeter 100 watts RMS / 200 watts maximum per pair One-inch aluminum diaphragms N35 neodymium magnet structures 107 dB sensitivity 2 kHz–20 kHz frequency response External 12 dB crossover protection Powder-coated metal grilles Replaceable CRT075 diaphragms Sold as a matched pair High-Output Road Glide Tweeter and Grille Upgrade The Cicada Audio 24CHDRGGTK-075 combines custom Road Glide kidney grilles, integrated tweeter mounting, two RR075T ring-radiator horn tweeters and the required crossover protection in one model-specific fairing upgrade. The RR075T tweeters are designed to improve vocal detail, cymbal definition and upper-frequency projection in open-air motorcycle audio systems. Their high 107 dB sensitivity produces strong output without requiring excessive amplifier power. Powder-coated metal grilles protect the tweeters while maintaining the distinct Road Glide kidney-grille appearance. The compact installation footprint allows the tweeters to sit inside the custom fairing grilles without the bulk of a universal surface-mounted horn. Tweeter and grille kit only: This package does not include 6.5-inch mid-bass or full-range speakers, an amplifier, speaker wiring or factory-radio integration. The RR075T tweeters must be used with their supplied crossover protection. Harley-Davidson Road Glide Fitment 2023.5 CVO Road Glide Intended for compatible late-production CVO Road Glide motorcycles using the redesigned fairing and kidney-grille configuration. 2024+ Road Glide Designed around compatible 2024 and newer Harley-Davidson Road Glide fairing grille locations. Road Glide-specific configuration: These kidney grilles are not designed for Street Glide fairings. Confirm the exact motorcycle year, model, trim, fairing design and existing audio equipment before ordering. Everything Included Left Road Glide Kidney Grille One precision-punched, powder-coated metal grille with an integrated mounting location for the supplied Cicada RR075T tweeter. Right Road Glide Kidney Grille One matching right-side grille engineered for clean, balanced fitment in the compatible Road Glide fairing. Two Cicada RR075T Tweeters One matched pair of 4-ohm ring-radiator horn tweeters with aluminum diaphragms, high-temperature voice coils and N35 neodymium motors. External Crossover Protection Supplied 12 dB crossover protection filters frequencies below the tweeters’ intended operating range and reduces distortion. Why Riders Choose the 24CHDRGGTK-075 Road Glide-Specific Grilles Precision-punched kidney grilles provide cleaner fitment than a universal surface-mounted tweeter installation. High Sensitivity The 107 dB sensitivity rating supports strong high-frequency output with comparatively modest amplifier power. Aluminum Diaphragms Lightweight, rigid diaphragms reproduce crisp detail and retain clarity at elevated motorcycle listening levels. N35 Neodymium Motors Compact high-energy magnet structures provide efficient output without adding unnecessary fairing weight. Advanced Heat Dissipation Integrated heat-sink construction supports more consistent performance during extended high-volume use. Serviceable Design The tweeter diaphragms can be replaced with Cicada CRT075 service diaphragms instead of replacing the complete tweeter assembly. Key Specifications Manufacturer Cicada Audio Manufacturer SKU 24CHDRGGTK-075 Legacy GBS SKU Reference 24CHDRGGTK Product Type Road Glide fairing grille and horn tweeter kit Vehicle Application Compatible 2023.5 CVO and 2024+ Harley-Davidson Road Glide Quantity Matched left and right pair Tweeter Model Cicada Audio RR075T Tweeter Type 0.75-inch ring-radiator horn tweeter Nominal Impedance 4Ω per tweeter Power Handling Per Tweeter 50W RMS / 100W maximum Power Handling Per Pair 100W RMS / 200W maximum Diaphragm One-inch aluminum diaphragm Voice Coil High-temperature aluminum voice-coil design Magnet N35 neodymium Basket Heavy-duty die-cast aluminum Sensitivity 107 dB at 1W/1m Frequency Response 2 kHz–20 kHz ±5 dB Crossover External 12 dB crossover in a vented enclosure Grille Design Road Glide-specific precision-punched kidney grilles Grille Finish Powder-coated metal Mounting Depth 1.13 inches / 28.9 mm Mounting Diameter 2 inches / 50 mm Replacement Diaphragm Cicada Audio CRT075, sold separately RR075T Ring-Radiator Horn Tweeters The RR075T is a compact horn tweeter designed to deliver efficient high-frequency projection from limited motorcycle fairing space. Its aluminum diaphragm and high-temperature voice coil provide crisp output, while the N35 neodymium motor keeps the assembly compact and lightweight. 50W RMS Per Tweeter The current manufacturer rating provides a reliable amplifier matching reference for each 4-ohm driver. 107 dB Sensitivity High efficiency allows the tweeters to produce strong output from appropriately matched amplifier power. 2 kHz–20 kHz Response The broad upper-frequency range supports vocal detail, percussion definition and high-frequency sparkle. Use the supplied crossover protection: Do not connect either RR075T directly to an unfiltered full-range or mid-bass amplifier channel. Amplifier and Crossover Matching Each RR075T presents a nominal 4-ohm load and handles 50 watts RMS. Amplifier gain and crossover settings must be configured around the tweeter’s continuous-power rating rather than its maximum rating. Use one protected output path for each tweeter. Install the supplied 12 dB crossover protection. Do not send unfiltered midrange or bass frequencies to the tweeters. Verify positive and negative polarity on both sides. Secure crossover components away from direct moisture and vibration. Limit clean amplifier output to the tweeters’ RMS capability. Do not use amplifier gain as a volume control. Reduce output if harshness, distortion or mechanical noise occurs. System balance matters: Match the tweeter output to the front mid-bass or full-range speakers. Excessive tweeter gain can create an overly bright and poorly integrated front soundstage. Installation and Mounting Notes Remove the Road Glide fairing according to the motorcycle service procedure. Confirm left and right kidney-grille orientation before installation. Verify tweeter and crossover clearance inside the fairing. Protect wiring from steering movement, heat and sharp edges. Secure each crossover so it cannot move or contact the fairing. Confirm tweeter polarity before reinstalling the outer fairing. Test the complete audio system at low volume before final assembly. Confirm grille alignment and fastener engagement before riding. Best For 2023.5 CVO Road Glide high-frequency upgrades 2024+ Road Glide fairing audio systems Cicada Audio component speaker systems High-output motorcycle mid-bass systems needing dedicated tweeters Replacing universal tweeter mounts with model-specific grilles Improving vocal detail and highway-speed clarity Custom Road Glide DSP and amplifier systems Fitment and Ordering Notes Sold as one matched left and right grille-and-tweeter pair. Designed for compatible late-model Road Glide fairings. Not designed for Street Glide fairing grille locations. Mid-bass and full-range speakers are not included. An amplifier and speaker wiring are not included. Factory-radio or aftermarket signal integration is not included. The external crossover protection must be installed. Confirm fairing fitment and current speaker configuration before ordering. Confirm amplifier power and gain settings before playing the system. Current Shipping Promotion Enter code ShipOne at checkout for eligible free shipping. Current checkout requirements and product exclusions apply. Related Motorcycle Audio Categories Road Glide and Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Motorcycle Speakers Cicada Audio Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Road Glide Grille and Tweeter FAQ What is included with the 24CHDRGGTK-075? The package includes a matched pair of Road Glide kidney grilles, two Cicada RR075T horn tweeters and external crossover protection. Is 24CHDRGGTK-075 the current manufacturer SKU? Yes. Cicada currently identifies the complete 2024+ Road Glide grille and RR075T tweeter package as 24CHDRGGTK-075. Does this kit include 6.5-inch speakers? No. This kit adds grille-mounted horn tweeters. Mid-bass or full-range fairing speakers must be installed separately. What motorcycles does it fit? It is designed for compatible 2023.5 CVO Road Glide and 2024 or newer Harley-Davidson Road Glide fairings. Will it fit a Street Glide? No. The Street Glide uses a different fairing and grille design. What impedance are the tweeters? Each RR075T tweeter has a nominal impedance of 4 ohms. How much power does each RR075T handle? Each tweeter is currently rated for 50 watts RMS and 100 watts maximum. What is the total power rating for the pair? The matched pair is rated for 100 watts RMS and 200 watts maximum. What is the frequency response? Cicada specifies a frequency response of 2 kHz through 20 kHz, within plus or minus 5 dB. Are crossovers included? The package includes external 12 dB crossover protection in a vented enclosure design. Can the tweeters be connected directly to an amplifier? No. The crossover protection must remain in the signal path to prevent damaging lower frequencies from reaching the tweeters. Can the tweeter diaphragms be replaced? Yes. Cicada offers the CRT075 replacement diaphragm separately for servicing the RR075T tweeter. Is professional installation recommended? Yes. Correct fairing removal, crossover placement, polarity, amplifier matching, wiring and gain setup are important for reliable performance. Need Help Matching This Road Glide Tweeter Kit? Garage Bagger Stereo can help verify Road Glide fitment, 4-ohm impedance selection, amplifier matching, grille and crossover mounting, speaker wiring and factory or aftermarket signal integration before installation. Installation Services Request a Custom BuildSale
Watch: 23.5+ Harley Audio Install Overview
This video explains what’s different on the 23.5+ touring platform and helps you avoid ordering the wrong parts for your build.
Why Upgrade 23.5+ 6.5" Speakers
The factory system on 23.5+ touring bikes is improved, but it still leaves volume and clarity on the table. Upgrading your 6.5" speakers gives you a stronger front stage, better detail, and cleaner sound at speed. For best results, pair them with the correct installation parts and amplification.
What You’ll Find in This Collection
- Coaxial speakers for clean, balanced sound upgrades
- Pro coax / high-output options for louder systems and stronger projection
- Platform-correct fitment designed for the 23.5+ touring fairings
Recommended Next Steps for Your Build
23.5+ Installation Parts
The correct mounting, wiring, and platform-specific parts for a clean 23.5+ install.
23.5+ Plug and Play Kits
Complete kits designed for correct fitment and clean integration on the newest Harley platform.
23.5+ Speaker Installation
Install essentials and hardware designed specifically for 23.5+ speaker upgrades.
23.5+ 6x9" Speakers
Rear speaker upgrades that match output goals and fitment for the newest touring platform.
Choose the Right Speaker for Your Riding Style
If you want help choosing between coaxial vs pro coax options for your exact system goals, Garage Bagger Stereo can help you match the right speaker setup for your 23.5+ Harley touring bike.
About Our 6.5" Speakers
Welcome to the future of motorcycle audio. At Garage Bagger Stereo, we specialize in delivering exceptional sound experiences for Harley Davidson enthusiasts. Our selection of 6.5" speakers are the perfect upgrade for your 2023 CVO or 2024 Road Glide, Street Glide, and other touring models, ensuring every ride is accompanied by unparalleled audio quality. These speakers are meticulously crafted to provide crystal-clear highs, robust mids, and deep bass, transforming your music into a rich, immersive experience.
Installation Made Easy
Installing these 6.5" speakers is straightforward and hassle-free, thanks to our comprehensive plug-and-play kits. Each kit is designed to fit perfectly with your Harley Davidson 2023 CVO or 2024 model, ensuring seamless integration without the need for cutting or splicing wires. Whether you’re a DIY enthusiast or prefer professional installation, our kits include all necessary components for a smooth setup, allowing you to get back to what matters most—riding with an epic soundtrack. See installation details here.
Tailored Solutions for Your Ride
We understand that every rider has unique preferences, which is why we offer a variety of 6.5" speakers to suit different audio needs. From weather-resistant models built to endure the rigors of the road to powerful units that deliver booming sound, our selection caters to all requirements. These speakers are compatible with a range of amplifier sizes and configurations, allowing you to customize your audio system to your exact specifications.
Why Choose Garage Bagger Stereo?
Garage Bagger Stereo is your ultimate destination for high-performance motorcycle audio solutions. We specialize in providing products that not only meet but exceed the expectations of Harley Davidson enthusiasts. Our commitment to quality and innovation ensures that every speaker we offer is built to withstand the rigors of the road while delivering exceptional sound. With years of experience and a passion for motorcycle audio, we understand the unique needs of riders and are dedicated to providing products that elevate your riding experience.
Ready for a Sound Revolution?
Transform your Harley Davidson 2023 CVO or 2024 model with a sound system that matches your motorcycle's power and prestige. Our plug-and-play audio kits are the perfect upgrade for riders demanding the best performance and ease of installation. Elevate your riding experience with premium sound quality that cuts through the noise of the road, making every ride more enjoyable and immersive. Browse our selection of 6.5" speakers today and take the first step towards aural excellence on your Harley. For further assistance or to place an order, contact the experts at Garage Bagger Stereo. Upgrade your ride’s audio system and experience the difference quality sound can make.