Harley Plug-and-Play Amplifiers
Harley-Davidson plug and play amplifiers: four-channel models from Cicada Audio (FLX series, including the FLX700.4PRO and FLX1400.4PRO DSP versions), DS18 (ION series), DB Drive (Euphoria XPERT) and SounDigital (XP series), plus Diamond Audio NEO DSP amplifiers in 6-channel and monoblock versions. Compare output per channel, match it to your speakers, and confirm the harness for your bike year (1998-2013, 2014-2023 or 2024-Present).
Build It Right the First Time
Not sure which parts fit your exact bike and setup? Start with a clean, correct plan.
- Fitment confirmed for your exact bike and year
- Parts matched to your speakers and amplifier
- Build help from a GBS specialist
Browse Collections
-
DS18 ION1000.4D Four Channel Amplifier
Vendor:DS18 Motorcycle AudioDS18 ION1000.4 Compact Full-Range Class D 4-Channel Amplifier 4 x 150 Watts RMS @ 4-ohm ION 1000.4D RMS Power @ 4Ω 4x150W RMS Power @ 2Ω 4x250W RMS Power @ 4Ω Bridge 2x500W Product Dimensions: 6.14 x 4.72 x 2.0 in Hi-Level Inputs Tiffany RCA Terminal LED Clip Indicator High Efficiency Micro Digital Design Power Input Terminal Size 4 AWG Fuse Size 80A Selectable X-Over LPF/HPF/Full Efficiency at 4Ω 88% 2 Year Warranty 4 AWG Power Kit Register your product Introducing DS18’s ION1000.4D, the perfect digital micro amplifier addition to your car audio system for boosting performance ensuring a premium listening experience! Hi-level Inputs and Tiffany RCA’s allow this amplifier to be easily integrated into any existing audio setup and ensure optimal signal transfer for crystal clear sound. The ION1000.4D’s miniature size and surface mount component technology allows it to be placed almost anywhere in your build without taking up too much space. The full variable crossover switch lets you customize your audio settings to your preferences for enhanced audio clarity across all frequencies. Fine tune these levels with the convenient remote level knob control! Surface mount component technology makes this amplifier highly resistant to vibrations, ensuring stable performance even on rough terrain. Additionally, protective coating prevents moisture corrosion on the PCB, guaranteeing longevity and durability. Safety was a top priority in the creation of DS18’s ION1000.4D amplifier. The power, protection, and clipping LED indicator always keeps you informed of the amplifiers status. While short circuit thermal, DC offset, and high/low voltage protection features, give you the comfort of knowing that your amplifier will operate reliably and safely. The ION1000.4D has power ratings of 2 X 500W at 4-ohm bridged, 2 x 250W at 2 ohms, and 4 x 150W at 4 ohms; perfect power ratings to turbocharge every component in your system! Experience the power and precision of DS18’s ION1000.4D! -
DS18 ION1600.4D Four Channel Amplifier
Vendor:DS18 Motorcycle AudioDS18 ION1600.4 Compact Full-Range Class D 4-Channel Amplifier 4 x 240 Watts RMS @ 4-ohm ION 1600.4D RMS Power @ 4Ω 4x240W RMS Power @ 2Ω 4x400W RMS Power @ 4Ω Bridge 2x800W Product Dimensions: 7.32 x 4.72 x 2.0 in Hi-Level Inputs Tiffany RCA Terminal LED Clip Indicator High Efficiency Micro Digital Design Power Input Terminal Size 4 AWG Fuse Size 140A Selectable X-Over LPF/HPF/Full Efficiency at 4Ω 88% 2 Year Warranty 4 AWG Power Kit Register your product Introducing DS18’s ION1600.4D, the perfect digital micro amplifier addition to your car audio system for boosting performance ensuring a premium listening experience! Hi-level Inputs and Tiffany RCA’s allow this amplifier to be easily integrated into any existing audio setup and ensure optimal signal transfer for crystal clear sound. The ION1600.4D’s miniature size and surface mount component technology allows it to be placed almost anywhere in your build without taking up too much space. The full variable crossover switch lets you customize your audio settings to your preferences for enhanced audio clarity across all frequencies. Surface mount component technology makes this amplifier highly resistant to vibrations, ensuring stable performance even on rough terrain. Additionally, protective coating prevents moisture corrosion on the PCB, guaranteeing longevity and durability. Safety was a top priority in the creation of DS18’s ION1600.4D amplifier. The power, protection, and clipping LED indicator always keeps you informed of the amplifiers status. While short circuit thermal, DC offset, and high/low voltage protection features, give you the comfort of knowing that your amplifier will operate reliably and safely. The ION1600.4D has power ratings of 2 X 800W at 4-ohm bridged, 4 x 400W at 2 ohms, and 4 x 240W at 4 ohms; perfect power ratings to turbocharge every component in your system! Experience the power and precision of DS18’s ION1600.4D! -
SaleCicada Audio FLX700.4 Motorcycle Amplifier
Vendor:Cicada AudioCicada Audio FLX700.4 4-Channel Motorcycle Amplifier The Cicada Audio FLX700.4 is a compact 4-channel motorcycle amplifier built for Harley-Davidson and Indian touring audio systems that need clean power, efficient output, and reliable highway-speed performance. With up to 175 watts x 4 at 2Ω, onboard crossover control, REM/DC turn-on, and a small motorcycle-ready chassis, the FLX700.4 is a strong fit for fairing speakers, saddlebag lid speakers, and clean amplified bagger audio builds. Cicada Amplifiers Motorcycle Amplifiers Shop Cicada Audio THE REFERENCE STANDARD Compact 4-Channel Power for Harley Audio Built for riders who need clean motorcycle amplifier power, compact installation, 2Ω/4Ω speaker support, and dependable output for real bagger audio systems. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio FLX700.4 4-Channel Motorcycle Amplifier Amplifier Type Compact 4-channel motorcycle amplifier Best For Harley-Davidson and Indian touring audio systems, fairing speakers, saddlebag lid speakers, coaxial speakers, and clean amplified motorcycle audio builds System Goal Clean power, stronger speaker output, better clarity, compact installation, and louder highway-speed performance Speaker Support 2Ω and 4Ω speaker systems, depending on final wiring and system design Install Focus Compact motorcycle amplifier layout for Harley-Davidson Touring, Road Glide, Street Glide, CVO, Indian, and custom bagger audio systems Always verify speaker impedance, wiring layout, fuse size, amplifier placement, gain structure, charging system capacity, and final system design before ordering or installing this amplifier. Built for Clean Harley-Davidson and Indian Audio Power The Cicada FLX700.4 is built for riders who want a clean, compact amplifier upgrade without overcomplicating the system. It gives Harley-Davidson and Indian touring motorcycles the power needed to run upgraded motorcycle-specific speakers with better clarity, stronger output, and more control than factory power alone. This amplifier is a strong choice for riders powering front fairing speakers, rear speakers, saddlebag lid speakers, or a balanced 4-channel motorcycle audio system. When matched with the right speakers, wiring, and tuning, the FLX700.4 helps the system stay cleaner and louder at speed. Power and Performance Specifications Channels 4 RMS Power @ 4Ω 125 watts x 4 channels RMS Power @ 2Ω 175 watts x 4 channels Bridged Power @ 4Ω 350 watts x 2 channels Crossovers HPF / LPF / FULL, 30Hz–300Hz Signal-to-Noise Ratio 95dB THD <0.1% Operating Voltage 8V–16V Fuse Rating 60A total, 2 x 30A Dimensions 11.5" x 5.1" x 1.8" Best Use for the FLX700.4 The FLX700.4 is best used in Harley-Davidson and Indian bagger audio builds that need compact 4-channel amplifier power for fairing speakers, rear speakers, saddlebag lid speakers, or efficient coaxial speaker systems. Designed Around Real Motorcycle Audio Motorcycle audio is different from car audio. Wind noise, road speed, speaker placement, electrical limits, wiring path, and mounting space all matter. This amplifier should be matched with the correct speaker load, clean wiring, and a proper tuning plan. Recommended System Planning To get the best performance from the Cicada FLX700.4, match it with efficient motorcycle-specific speakers, proper OFC power and ground wiring, correct battery-side fusing, clean signal input, and a real tuning plan. For Harley-Davidson Touring, Indian touring, and custom bagger audio systems, amplifier power should always be planned around the speakers, impedance, charging system, mounting location, and final sound goal. If you are unsure whether this amplifier is the right choice for your Road Glide, Street Glide, CVO, Road King, Indian, or custom motorcycle audio build, contact Garage Bagger Stereo before ordering. Related Cicada & Motorcycle Audio Paths Build the system around the correct amplifier, speakers, DSP, wiring, and installation parts. These related collections help match the FLX700.4 with the right Harley or Indian audio upgrade path. Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle amplifiers for Harley bagger audio systems Shop Cicada Audio speakers, amplifiers, DSP, and bagger audio upgrades Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle amplifier installation parts Need Help Choosing the Right Cicada Amplifier? Need help matching the Cicada FLX700.4 to your speakers, bike, wiring, DSP, or complete Harley audio system? Call Garage Bagger Stereo or start a build consultation and we’ll help match the amplifier power, speaker layout, impedance, wiring, and tuning plan to your build. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio FLX700.4PRO – 175W x 4ch DSP Pro Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX700.4PRO — Compact 4-Channel Power with Built-In DSP Small chassis, big control. The FLX700.4PRO delivers clean power with an onboard 6-channel DSP (4 amplified + 2 pass-through), Bluetooth® streaming, and USB-C PC tuning. Designed for H-D® amp racks with multiple brackets, plus Molex® inputs for RCA or bike-specific termination. Why Riders Choose It Real output — 120×4 @ 4Ω, 175×4 @ 2Ω, or 350×2 bridged @ 4Ω (14.4V). 6-ch DSP onboard — tune crossovers/EQ on the bike; Bluetooth® audio built in. Bike-ready build — conformal-coated PCB in an extruded aluminum heatsink. Flexible turn-on — REM / DC / VOX with status & clipping LEDs. Premium I/O — 4 AWG power, 12 AWG speaker busbar-style terminals. Best With Front & rear pro speakers at 2–4Ω Bridged 4Ω pairs for lids/mid-bass OFC wiring, correct fusing, and solid grounds Factory radio or DSP signal — we’ll help map gains/filters Tell us your bike and speakers — we’ll pre-map crossovers and gains for highway-clear performance. Key Specifications RMS @ 4Ω (14.4V) 120 × 4 RMS @ 2Ω (14.4V) 175 × 4 Bridged @ 4Ω (14.4V) 350 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD + N (10% rated power) 0.1% @ 2Ω per ch SNR (A-wt) / Damping Factor 91 dB / 200 DSP / Tuning 6-ch DSP (4 amp + 2 pass), Bluetooth® audio, USB-C PC tuning Turn-On Modes REM / DC / VOX Operating Voltage 9 – 16 V Current Draw (Music / Max) 50 A / 80 A Recommended Fuse (Music) 50 A Efficiency ~80% Gain Range 0.2 – 12 V Dimensions (with brackets) 5.3″ × 4.9″ × 2.0″ (134 × 125 × 51 mm) Dimensions (chassis) 4.1″ × 4.9″ × 2.0″ (104 × 125 × 51 mm) Specs per Cicada Audio product page. Always verify wiring/impedance and set gains conservatively. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean OFC wiring and correct fusing On-bike DSP tuning for loud, clear highway sound Nationwide shipping & tech support Need Help? Call (864) 334-6131. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX1000.4 — 4‑Channel Motorcycle Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX1000.4 — Compact 4-Channel Power for Bagger Audio Big output in a small chassis. The FLX1000.4 feeds your front + rear speakers real power from a palm-size, bike-ready amp. Flexible HPF/LPF crossovers, REM/DC turn-on, and clean tuning make it a favorite for Harley-Davidson® and Indian® builds that need highway-clear sound without bulky gear. Why Riders Choose It Serious output — up to 254×4 @ 2Ω or 530×2 bridged @ 4Ω (14.4V). Compact chassis — 6.0″ × 4.9″ × 2.0″ fits behind fairings or in bags. Bike-ready — designed for the motorcycle environment. Flexible turn-on — REM / DC options for easy integration. On-board crossovers — HPF / FULL / LPF 30–300 Hz, 12 dB/oct. Shop Motorcycle Amplifiers Best With Front & rear speakers at 2–4Ω Bridged 4Ω pairs for lids or mid-bass OFC wiring with correct fusing and clean grounds Factory radio or DSP — we’ll map gains & filters Tell us your bike and speakers — we’ll set crossover points and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (12.5V / 14.4V) 150 × 4 / 168 × 4 RMS Power @ 2Ω (12.5V / 14.4V) 220 × 4 / 254 × 4 Bridged @ 4Ω (12.5V / 14.4V) 461 × 2 / 530 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor 91 dB / 200 Crossovers HPF / FULL / LPF: 30–300 Hz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 8 – 16 V Current Draw (Music / Max) 60 A / 116 A Recommended Fuse (Music) 120 A Efficiency ~79% Dimensions (L × W × H) 6.0″ × 4.9″ × 2.0″ (152 × 124 × 51 mm) Specs from Cicada’s product page; retailer listings corroborate ratings and dimensions. Always verify wiring/impedance before power-on. Frequently Asked Questions — Motorcycle Audio Can it run fronts and lids with one amp? Yes — many builds run four channels at 2–4Ω. Use HPF/LPF and proper gains for clean balance. Will it work with my factory radio? Yes. Use REM or DC turn-on and set gains carefully. Add a DSP if you need advanced EQ/time alignment. Can I bridge it for more power? Yes — bridge pairs at 4Ω for up to ~530 W × 2 (14.4V). Use LPF for mid-bass or small sub duty. What wiring and fuse do I need? Use OFC power/ground sized for current draw; fuse at the battery (120 A music rec.). Keep grounds short and solid. Is it motorcycle-ready? Yes — designed for bikes. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131 with your bike and speakers. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX1400.4 — 4‑Channel Motorcycle Amplifier
Vendor:Cicada AudioCicada Audio FLX1400.4 4-Channel Motorcycle Amplifier The Cicada Audio FLX1400.4 is a high-output 4-channel motorcycle amplifier built for Harley-Davidson bagger audio systems that need serious clean power, strong speaker control, and reliable highway-speed output. This amplifier is a strong fit for riders powering fairing speakers, saddlebag lid speakers, midbass, or bridged speaker pairs in a loud, clean, motorcycle-ready audio build. Cicada Amplifiers Motorcycle Amplifiers Shop Cicada Audio THE REFERENCE STANDARD Clean 4-Channel Power for Harley Bagger Audio Built for riders who need compact motorcycle amplifier power, flexible crossover control, 2Ω/4Ω speaker support, and strong output for real Harley audio systems. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio FLX1400.4 4-Channel Motorcycle Amplifier Amplifier Type High-output 4-channel motorcycle amplifier Best For Harley-Davidson bagger audio, fairing speakers, saddlebag lid speakers, midbass, and amplified motorcycle audio systems System Goal Clean power, stronger output, better speaker control, and louder highway-speed performance Speaker Support 2Ω and 4Ω speaker systems, depending on final wiring and system design Install Focus Compact motorcycle amplifier layout for Harley-Davidson Touring and custom bagger audio builds Always verify speaker impedance, wiring layout, fuse size, amplifier placement, gain structure, and system design before ordering or installing this amplifier. Built for High-Output Harley Audio Systems The Cicada FLX1400.4 is built for Harley-Davidson and motorcycle audio systems where factory power is not enough. It gives riders the headroom needed to drive upgraded 6.5" speakers, 6x9 speakers, pro coaxials, midbass drivers, and bridged speaker pairs with cleaner output and better control. This amplifier is a strong choice when the goal is louder vocals, stronger midbass, reduced distortion, and better open-air performance at speed. In a properly planned Harley bagger audio system, the FLX1400.4 can support front and rear speaker layouts, fairing and lid speaker upgrades, or bridged power for more aggressive output. Power and Performance Specifications RMS Power @ 4Ω Approximately 200 watts x 4 channels at 14.4V RMS Power @ 2Ω Approximately 350 watts x 4 channels at 14.4V Bridged Power @ 4Ω Approximately 700 watts x 2 channels at 14.4V Frequency Response 20Hz–20kHz +/-3dB THD < 0.5% at 1kHz Signal-to-Noise Ratio Approximately 91dB A-weighted Damping Factor Approximately 200 Crossovers HPF / FULL / LPF, 30Hz–300Hz, 12dB/octave Turn-On Modes REM / DC turn-on support Operating Voltage 8V–16V Current Draw Approximately 70A music / 130A max Recommended Fuse Approximately 150A for music use Best Use for the FLX1400.4 The FLX1400.4 is best used in Harley-Davidson bagger audio builds that need strong 4-channel amplifier power for fairing speakers, saddlebag lid speakers, midbass, or bridged speaker layouts. It is built for riders who want more output without giving up control or clarity. Designed Around Real Motorcycle Audio Motorcycle audio is different from car audio. Wind noise, road speed, speaker placement, electrical load, and limited mounting space all matter. This amplifier belongs in systems where the speaker choice, wiring, fusing, and tuning plan are matched correctly. Recommended System Planning To get the best performance from the Cicada FLX1400.4, match it with the right speakers, proper OFC power and ground wiring, correct battery-side fusing, clean signal input, and a real tuning plan. For Harley-Davidson Touring and custom bagger audio systems, amplifier power should always be planned around the speakers, impedance, charging system, mounting location, and final sound goal. If you are unsure whether this amplifier is the right choice for your Road Glide, Street Glide, CVO, Road King, Indian, or custom motorcycle audio build, contact Garage Bagger Stereo before ordering. Related Cicada & Motorcycle Audio Paths Build the system around the correct amplifier, speakers, DSP, wiring, and installation parts. These related collections help match the FLX1400.4 with the right Harley audio upgrade path. Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle amplifiers for Harley bagger audio systems Shop Cicada Audio speakers, amplifiers, DSP, and bagger audio upgrades Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle amplifier installation parts Need Help Choosing the Right Cicada Amplifier? Need help matching the Cicada FLX1400.4 to your speakers, bike, wiring, DSP, or complete Harley audio system? Call Garage Bagger Stereo or start a build consultation and we’ll help match the amplifier power, speaker layout, impedance, and tuning plan to your build. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio FLX2000.4 — 4‑Channel Motorcycle Amplifier
Vendor:Cicada AudioCicada Audio FLX2000.4 is a compact high-output four-channel motorcycle amplifier designed for Harley-Davidson, bagger, powersports, and custom audio systems. It delivers up to 542 watts RMS per channel at 2 ohms at 14.4 volts, supports 2-ohm and 4-ohm speaker systems, and provides bridgeable power, onboard crossover control, and motorcycle-ready construction for clean highway-speed output. Cicada Audio FLX2000.4 2000W 4-Channel Motorcycle Amplifier The Cicada Audio FLX2000.4 is a compact high-output 4-channel motorcycle amplifier built for Harley-Davidson bagger audio systems that need serious power, clean control, and highway-speed volume. With strong output at 2Ω and 4Ω, bridgeable power, onboard crossover control, and motorcycle-ready construction, the FLX2000.4 is built for riders who want more speaker authority without adding oversized amplifier hardware. Cicada Amplifiers Motorcycle Amplifiers Shop Cicada Audio THE REFERENCE STANDARD Big 4-Channel Power for Harley Bagger Audio Built for high-output Harley audio systems that need compact amplifier power, clean tuning control, 2Ω/4Ω speaker support, and serious open-air performance. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio FLX2000.4 2000W 4-Channel Motorcycle Amplifier Amplifier Type High-output 4-channel motorcycle amplifier Best For Harley-Davidson bagger audio, fairing speakers, saddlebag lid speakers, midbass, bridged speaker pairs, and high-output amplified motorcycle systems System Goal More power, stronger speaker control, louder open-air output, cleaner tuning, and better highway-speed performance Speaker Support 2Ω and 4Ω speaker systems, depending on final wiring and system design Install Focus Compact motorcycle amplifier layout for Harley-Davidson Touring, Road Glide, Street Glide, CVO, Indian, and custom bagger audio builds Cicada Audio requires a lithium battery upgrade and 4 AWG power wire (HGPG4K) for this amplifier. Always verify speaker impedance, wiring layout, fuse size, amplifier placement, gain structure, charging system capacity, and final system design before ordering or installing this amplifier. Built for Serious Harley-Davidson Audio Power The Cicada FLX2000.4 is made for riders who need more than basic motorcycle amplifier power. It is designed to drive upgraded 6.5" speakers, 6x9 speakers, pro coaxials, saddlebag lid speakers, midbass drivers, or bridged 4Ω speaker pairs with serious output and control. In a properly planned Harley-Davidson bagger audio system, the FLX2000.4 can support aggressive front and rear speaker layouts, bridged midbass power, or full custom speaker systems where clean volume and highway-speed performance are the priority. Power and Performance Specifications RMS Power @ 4Ω 275 watts x 4 channels at 12.5V / 331 watts x 4 channels at 14.4V RMS Power @ 2Ω 450 watts x 4 channels at 12.5V / 542 watts x 4 channels at 14.4V Bridged Power @ 4Ω 866 watts x 2 channels at 12.5V / 1044 watts x 2 channels at 14.4V Frequency Response 20Hz–20kHz +/-3dB THD < 0.5% at 1kHz Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Crossovers HPF / FULL / LPF, 30Hz–300Hz, 12dB/octave Turn-On Modes REM / DC turn-on support Operating Voltage 8V–16V Current Draw 60A music / 240A max Recommended Fuse 120A for music use Efficiency Approximately 79% Gain Range 0.2V–12V Dimensions 9.2" x 4.9" x 2.0" / 233.68mm x 124mm x 51mm Best Use for the FLX2000.4 The FLX2000.4 is best used in Harley-Davidson and custom bagger audio builds that need strong 4-channel amplifier power for fairing speakers, saddlebag lid speakers, midbass, or bridged speaker pairs. Designed Around Real Motorcycle Audio Motorcycle audio is different from car audio. Wind noise, road speed, speaker placement, electrical load, limited mounting space, and heat management all matter. This amplifier belongs in systems where the speakers, wiring, fusing, and tuning plan are matched correctly. Recommended System Planning To get the best performance from the Cicada FLX2000.4, match it with the right speakers, proper OFC power and ground wiring, correct battery-side fusing, clean signal input, and a real tuning plan. For Harley-Davidson Touring and custom bagger audio systems, amplifier power should always be planned around the speakers, impedance, charging system, mounting location, and final sound goal. If you are unsure whether this amplifier is the right choice for your Road Glide, Street Glide, CVO, Road King, Indian, or custom motorcycle audio build, contact Garage Bagger Stereo before ordering. Related Cicada & Motorcycle Audio Paths Build the system around the correct amplifier, speakers, DSP, wiring, and installation parts. These related collections help match the FLX2000.4 with the right Harley audio upgrade path. Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle amplifiers for Harley bagger audio systems Shop Cicada Audio speakers, amplifiers, DSP, and bagger audio upgrades Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle amplifier installation parts Need Help Choosing the Right Cicada Amplifier? Need help matching the Cicada FLX2000.4 to your speakers, bike, wiring, DSP, or complete Harley audio system? Call Garage Bagger Stereo or start a build consultation and we’ll help match the amplifier power, speaker layout, impedance, wiring, and tuning plan to your build. Call 864-334-6131 Start a Build ConsultationSale -
SaleDB Drive Euphoria XPERT EX100.4 Full Range Class D 4-Channel Amplifier
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. EX100.4 : 4 Channel Full Range Class D Amplifier Achieve superior audio performance with the XPERT EX100.4, engineered for high output in a compact design—ideal for motorcycle and space-limited applications. Capable of powering high-performance tweeter, compression drivers, and midranges with ease. Features 4 Channel Class D Circuitry ACT - Adaptive Crossover Technology High efficiency Full Range Class D Technology Direct Connect Speaker Terminals Large Gauge Power Wire Inputs APC - Audio Protection Circuit SESI - Signal Evaluation Status Indicator Specifications @14.4 Volts - 1% THD 4 x 50 Watts @ 4 Ohm 4 x 100 Watts @ 2 Ohm 2 x 200 Watts @ 4 Ohm (Bridged) Working Voltage: 10 - 16 Volts Frequency Response: 10Hz - 20KHz Signal to Noise Ratio: < 85dB Damping Factor @ 4 Ohm > 57/ 1KHz Low Level Input: 6V - 0.2V Ch 1/2 High Pass Filter Variable: 20Hz - 5KHz Ch 1/2 Low Pass Filter Variable: 50Hz - 5KHz Ch 3/4 High Pass Filter Variable: 20Hz - 5KHz Ch 3/4 Low Pass Filter Variable: 50Hz - 5KHz Minimum Working Impedance: 2 Ohm Stereo Dimensions L - 5" / 127mm W - 5.20" / 132.08mm H - 2.50" / 63.50mmSale -
SaleDB Drive Euphoria XPERT EX200.4 Full Range Class D 4-Channel Amplifier
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. EX200.4 : 4 Channel Full Range Class D Amplifier Achieve superior audio performance with the XPERT EX200.4, engineered for high output in a compact design—ideal for motorcycle and space-limited applications. Capable of powering high-performance tweeter, compression drivers, and midranges with ease. Features 4 Channel Class D Circuitry ACT - Adaptive Crossover Technology High efficiency Full Range Class D Technology Direct Connect Speaker Terminals Large Gauge Power Wire Inputs APC - Audio Protection Circuit SESI - Signal Evaluation Status Indicator Specifications @14.4 Volts - 1% THD 4 x 200 Watts @ 4 Ohm 4 x 300 Watts @ 2 Ohm 2 x 400 Watts @ 4 Ohm (Bridged) Working Voltage: 10 - 16 Volts Frequency Response: 10Hz - 20KHz Signal to Noise Ratio: < 95dB Damping Factor @ 4 Ohm > 101/ 1KHz Low Level Input: 6V - 0.2V Ch 1/2 High Pass Filter Variable: 20Hz - 5KHz Ch 1/2 Low Pass Filter Variable: 50Hz - 5KHz Ch 3/4 High Pass Filter Variable: 20Hz - 5KHz Ch 3/4 Low Pass Filter Variable: 50Hz - 5KHz Minimum Working Impedance: 2 Ohm Stereo Dimensions L - 7.45" / 189.23mm W - 5.20" / 132.08mm H - 2.50" / 63.50mmSale -
SaleDB Drive Euphoria XPERT EX300.4 Full Range Class D 4-Channel Amplifier
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. EX300.4 : 4 Channel Full Range Class D Amplifier Achieve superior audio performance with the XPERT EX300.4, engineered for high output in a compact design—ideal for motorcycle and space-limited applications. Capable of powering high-performance tweeter, compression drivers, and midranges with ease. Features 4 Channel Class D Circuitry ACT - Adaptive Crossover Technology High efficiency Full Range Class D Technology Direct Connect Speaker Terminals Large Gauge Power Wire Inputs APC - Audio Protection Circuit SESI - Signal Evaluation Status Indicator Specifications @14.4 Volts - 1% THD 4 x 300 Watts @ 4 Ohm 4 x 500 Watts @ 2 Ohm 2 x 600 Watts @ 4 Ohm (Bridged) Working Voltage: 10 - 16 Volts Frequency Response: 10Hz - 20KHz Signal to Noise Ratio: < 95dB Damping Factor @ 4 Ohm > 114/ 1KHz Low Level Input: 6V - 0.2V Ch 1/2 High Pass Filter Variable: 20Hz - 5KHz Ch 1/2 Low Pass Filter Variable: 50Hz - 5KHz Ch 3/4 High Pass Filter Variable: 20Hz - 5KHz Ch 3/4 Low Pass Filter Variable: 50Hz - 5KHz Minimum Working Impedance: 2 Ohm Stereo Dimensions L - 9" / 228.6mm W - 5.20" / 132.08mm H - 2.50" / 63.50mmSale -
SaleSounDigital 400.4 XP - 4Ω Amplifier
Vendor:SounDigitalThe SounDigital 400.4 XP is a compact 4-channel, 4 ohm motorcycle amplifier built to fit tight mounting areas.Key Specs 4 x 66 W RMS at 4 ohm; 4 x 100 W RMS at 2 ohm Bridged: 2 x 200 W RMS at 4 ohm Dimensions: 4.7 x 4.4 x 2.0 in Frequency response (-3 dB): 5 Hz to 36 kHz Fitment and Installation NotesCompact chassis for tight installs. Share your bike and speaker setup and we will confirm wiring and fit before you order.Browse motorcycle amplifiers. Motorcycle coaxial speakers. Get a custom build quote.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleSounDigital 800.4 XP - 4Ω Amplifier
Vendor:SounDigitalThe SounDigital 800.4 XP is a compact 4-channel, 4 ohm motorcycle amplifier built to fit tight mounting areas.Key Specs 4 x 132 W RMS at 4 ohm; 4 x 200 W RMS at 2 ohm Bridged: 2 x 400 W RMS at 4 ohm Dimensions: 5.7 x 4.4 x 2.0 in Frequency response (-3 dB): 5 Hz to 25 kHz Fitment and Installation NotesCompact chassis for tight installs. Share your bike and speaker setup and we will confirm wiring and fit before you order.Browse motorcycle amplifiers. Motorcycle coaxial speakers. Get a custom build quote.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale
Plug-and-Play Amplifiers at a Glance
| Brands | Cicada Audio, DS18, DB Drive, SounDigital, Diamond Audio |
| Cicada Audio | FLX700.4, FLX700.4PRO, FLX1000.4, FLX1400.4, FLX1400.4PRO, FLX2000.4 |
| DS18 | ION1000.4D and ION1600.4D four-channel amplifiers |
| DB Drive / SounDigital | Euphoria XPERT EX100.4, EX200.4, EX300.4 and XP 400.4, 800.4, 1200.4, 2400.4 |
| Diamond Audio | NEO10001DSP 1000W RMS monoblock and NEO15006DSP 1500W RMS 6-channel, both with DSP |
Summarized from the products in this collection. Confirm your model, year and amplifier or speaker setup on each product page before ordering.
Plug-and-Play Motorcycle Amplifiers
Already have speakers? These amplifiers are the amp-only way to add power to a Harley-Davidson touring system, with plug-and-play options for the factory harness where the product page lists them.
Most are four-channel amplifiers for the front and rear speakers. Diamond Audio adds a 6-channel DSP amplifier and a DSP monoblock.
Related Shopping
Finish the system.
Plug-and-Play Kits
Plug-and-Play DSP
Motorcycle Amplifiers
Amplifier Parts
Choosing an Amplifier
Match the amplifier to the system:
- Channel count: four channels for two pairs of speakers, six for a larger system
- Power rating against the speakers you are running
- Whether you want built-in DSP, as on the FLX700.4PRO, FLX1400.4PRO and Diamond Audio models
- Impedance, such as 4 ohm only versus 4 ohm or 2 ohm, listed on the SounDigital XP models
Need help matching an amp to your speakers? Call us or request a custom build consultation.
Need Help Choosing Harley Plug-and-Play Amplifiers?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.