Marine Pro Coaxial Speakers 6.5" Collection | Premium Marine Audio
6.5" marine pro coaxial speakers at Garage Bagger Stereo: Kicker KMXL65 horn-loaded, Kicker MSS65 component and Wet Sounds Zero 6 XZ-B.
6.5" pro coaxials add a horn or component design to a common marine speaker size. Confirm cutout and mounting depth on each product page and match impedance to your amplifier.
- Kicker KMXL65 horn-loaded with RGB LEDs
- Kicker MSS65 component speaker
- Wet Sounds Zero 6 XZ-B high output marine coaxial
6.5" Marine Pro Coaxials
Three different 6.5-inch designs: horn-loaded, component and high-output coaxial.
- Kicker KMXL65 horn-loaded, RGB LEDs
- Kicker MSS65 component, RGBW LEDs
- Wet Sounds Zero 6 XZ-B high-output
Browse Collections
-
SaleCicada Audio CHX65 PRO 6.5" Pro Coaxial Horn Speakers (Pair)
Vendor:Cicada AudioThe Cicada Audio CHX65 PRO is a 6.5" pro coaxial horn speaker sold as a pair in 2Ω (CHX65.2PRO) or 4Ω (CHX65.4PRO), rated 300 watts RMS / 600 watts max with 92dB sensitivity. Carbon Matrix Composite cone, aluminum tweeter dome and N45SH neodymium motor External 12dB crossover at 4kHz with -3/-6dB tweeter attenuation Weatherproof: Nanofram horn cover and Rain or Shine Pro all-weather design 2.6" (67mm) mounting depth, 5.75" (145.4mm) mounting diameter Fits all 1998-Present Harley-Davidson Touring models: drop-in on 2014-2023 and 2024-Present fairings; 1998-2013 fairings require Metra 82-9601 adapter rings Tour pack: 1998-2013 requires the Speed Rings Lowers/Pak Expansion Kit; 2014-Present may need Cicada's SPACER65-0.5 1/2" spacer Three-year Cicada warrantySale -
SaleCicada Audio CXX65 6.5" Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CXX65 6.5" Coaxial Speaker Pair Cicada Audio CXX65 6.5" Coaxial Speakers are built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and bagger audio systems that need clean full-range output, weatherproof performance, and strong 6.5" speaker upgrade potential. The CXX65 is a high-performance coaxial speaker designed for riders who want better clarity, improved efficiency, and reliable motorcycle audio performance in factory-style Harley speaker locations. Shop Cicada Audio 6.5" Coaxial Speakers Cicada Amplifiers THE REFERENCE STANDARD Weatherproof 6.5" Cicada Speakers for Harley Audio Built for riders who want clean sound, better clarity, strong efficiency, and reliable all-weather performance from a 6.5" Harley-Davidson motorcycle speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CXX65 6.5" Coaxial Speaker Pair Speaker Size 6.5" Speaker Type High-performance full-range coaxial motorcycle speaker Impedance Options 2Ω and 4Ω versions available depending on selected variant Best For Harley-Davidson Touring audio upgrades, factory-style 6.5" speaker locations, fairing speaker upgrades, and clean full-range motorcycle audio systems System Goal Clean output, better clarity, efficient performance, weatherproof durability, and improved Harley bagger audio Sold As Pair Always verify impedance, speaker location, mounting depth, grille clearance, amplifier compatibility, and final fitment before ordering for your Harley-Davidson audio build. Built for Harley-Davidson Touring Audio Upgrades The Cicada CXX65 is designed for riders who want a clean, efficient 6.5" coaxial speaker upgrade for Harley-Davidson motorcycle audio systems. It is a strong option for factory-designed Harley speaker locations where riders want better sound quality, weatherproof construction, and stronger output than a basic replacement speaker. With its low-profile design, all-weather performance, built-in crossover, V8™ Dispersion Guide, and efficient coaxial layout, the CXX65 is built to deliver clear sound in real motorcycle riding conditions. Weatherproof Full-Range Coaxial Design The CXX65 uses Cicada’s Rain or Shine™ all-weather performance design with moisture-resistant speaker materials, UV protection over all surfaces, a PEI tweeter dome, Kevlar cone construction, neodymium magnet structure, and a high-temperature resistant polycarbonate basket. The built-in 6dB crossover and V8™ Dispersion Guide help improve tweeter dispersion and speaker performance for motorcycle audio systems where sound needs to remain clear while the bike is moving. Specifications Speaker Size 6.5" coaxial speaker Power Handling 100 watts RMS / 200 watts max Frequency Response 55Hz–20kHz +/-3dB Sensitivity 93dB 1W/1M average, 2.83V Magnet Structure Neodymium high-energy lightweight magnet structure Cone Kevlar cone with moisture-resistant construction Surround NBR surround Frame / Basket High-temperature resistant polycarbonate custom-tooled basket Midbass Voice Coil 1.4" / 35mm voice coil Tweeter Voice Coil 1.0" / 25mm tweeter voice coil Tweeter Dome PEI tweeter dome Tweeter Design V8™ Dispersion Guide for 360-degree tweeter sound dispersion Crossover Built-in 6dB crossover Speaker Control Shorting ring design for improved speaker control Heat Control Advanced voice coil heat sink design for improved heat dissipation Mounting Depth 2.26" / 57.4mm Mounting Diameter 5.43" / 138mm Outside Dimensions 6.5" / 165mm Weather Protection Rain or Shine™ all-weather performance design with UV protection over all surfaces Included 6.5" grilles and hardware Warranty Two-year warranty Sold Pair Best Use for the Cicada CXX65 The CXX65 is best used in Harley-Davidson Touring and bagger audio systems where riders want a clean 6.5" coaxial speaker upgrade with strong clarity, efficient output, and weatherproof construction for daily riding. Factory-Style Speaker Locations The CXX65 is designed for 2014-2023 Harley-Davidson factory-designed speaker locations. Always verify mounting depth, speaker clearance, grille fitment, impedance, and amplifier compatibility before installation. Fitment and Installation Notes The Cicada CXX65 is designed for 2014-2023 Harley-Davidson factory-designed speaker locations, but every motorcycle audio build should be verified before ordering. Confirm speaker depth, mounting diameter, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, and custom bagger applications may require additional installation planning depending on the speaker location, factory parts, pods, adapters, and final audio system layout. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CXX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CXX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleDB Drive Euphoria XPERT EX6NCD-CFV2 6.5″ 2-Way Loudspeakers
Vendor:DB DriveDB Drive XPERT 6.5" 2-Way NEO Carbon Fiber Loudspeakers EX6NCD-CFV2 (Pair) Built for serious high-output sound systems, the DB Drive Xpert EX6NCD-CFV2 combines competition-level performance with clarity and durability. The included 12dB passive crossover handles frequency separation, while the custom aluminum basket with radial venting improves cooling and long-term reliability. Features 2.0" (51mm) Voice Coil Neodymium M-Ring Magnet Assembly Optimized for High Output SQ Sound Systems Rear-Mounted Full-Sized Compression Driver Weather-Resistant Carbon Fiber Cone with Cloth Surround Custom Aluminum Basket with Radial Venting 1.4" (36mm) Polyester Tweeter Diaphragm Wide Dispersion Conical HF Waveguide 12dB Passive Crossover Included Protective Grills Included Sold in Pairs Specifications Impedance: 3Ω Power Handling: 400W Dynamic Wattage: 800W Resonant Frequency (fs): 92.1 Hz Sensitivity (1W/1M): 106.1 dB Voice Coil: 2.0" (51mm) Dimensions Overall Diameter: 6.85" / 174 mm Cutout Diameter: 5.49" / 139.43 mm Mounting Depth: 3.44" / 87.30 mm Thiele-Small Parameters DC Voice Coil Resistance (Re): 3Ω Mechanical Q (Qms): 9.82 Electrical Q (Qes): 0.38 Total Q (Qts): 0.37 Vas: 4.6 L Cms: 0.19 mm/N Shop more 6.5" pro coaxial motorcycle speakers and DB Drive, or start a build consultation.Sale -
DB Drive WDX6MOTO-CD (pairs)
Vendor:DB DriveThe DB Drive WDX6MOTO-CD is a 6.5" 2-way coaxial speaker pair with a rear-mounted compression driver behind a 1" aluminum tweeter element. It is a high-efficiency pro coaxial for 6.5" speaker locations.Key Specs 1" aluminum compression-style tweeter, 1.5" high-output midrange voice coil Bi-ribbed treated cloth surround, protective grill included Power: 250W nominal, 500W max Frequency response: 90Hz-18kHz; sensitivity 102.7dB Nominal impedance 4 ohm Depth 3.08"; cutout diameter 5.67" Fitment and Installation NotesConfirm the cutout and mounting depth against your lid, fairing or saddlebag before ordering.Browse more motorcycle pro coaxial speakers and DB Drive motorcycle audio, or get a custom build planned around your bike.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
SaleDiamond Audio MS652NEO 6.5" 2-Way Coaxial Neo Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio MS652NEO 6.5" Pro Coaxial Neo Speakers — 2Ω or 4Ω The Diamond Audio MS652NEO is a 6.5-inch horn-loaded pro coaxial speaker designed for serious motorcycle, marine, powersports, and high-output vehicle audio systems. Its combination of a carbon-fiber cone, PEN high-frequency diaphragm, neodymium motor structure, and cast-aluminum basket is engineered to produce strong projection and clean output in demanding open-air environments. Available in 2-ohm and 4-ohm versions, the MS652NEO delivers 200 watts RMS of power handling with a dual-voice-coil, bi-ampable architecture that gives system builders additional flexibility when configuring amplification and DSP control. THE REFERENCE STANDARD 6.5" Pro Coaxial Output Built for the Highway Horn-loaded high-frequency projection, carbon-fiber midrange performance, and efficient neodymium motor technology for serious motorcycle audio systems. Start a Build Consultation Call 864-334-6131 Diamond Audio MS652NEO Key Specifications Series MS NEO Speaker Size 6.5 inches Speaker Type 2-Way Horn-Loaded Pro Coaxial 2Ω Model MS652NEO2 4Ω Model MS652NEO4 Power Handling 200W RMS / 400W MAX Sensitivity 93 dB (1W/1M) Voice Coil Configuration Dual Voice Coil Bi-Ampable Yes Field-Serviceable Voice Coil Yes Voice Coil Diameter 2 inches Cone Material Carbon Fiber High-Frequency Diaphragm PEN — Polyethylene Naphthalate Motor Neodymium Basket Cast Aluminum Surround Rubber Re 3.2Ω Qms 10.357 Qes 0.67 Qts 0.629 Fs 151 Hz Vas 2.756 L Cms 0.094 mm/N Mms 11.728 g Sd 143.14 cm² BL 7.289 T·m Xmax 1.2 mm Mounting Depth 3.43″ (87.13 mm) Cutout Diameter 5.63″ (143 mm) Overall Diameter 6.65″ (169 mm) Overall Height 3.79″ (96.33 mm) Fitment warning: These are high-output 6.5-inch pro coaxial speakers and are not a universal drop-in replacement. Verify cutout diameter, mounting depth, motor clearance, grille clearance, amplifier power, impedance, and complete system layout before ordering. 200W RMS High-Output Pro Coaxial Performance The MS652NEO is designed for motorcycle audio systems where a traditional automotive coaxial speaker may not provide enough output or projection. Its horn-loaded architecture increases high-frequency efficiency while the carbon-fiber cone handles the midrange and midbass frequencies required for strong open-air performance. Diamond Audio's formal technical specifications rate the MS652NEO platform at 200 watts RMS and 400 watts maximum power. Horn-Loaded Coaxial Architecture The high-frequency driver is positioned within the same overall speaker platform as the 6.5-inch cone, creating a compact coaxial system capable of delivering both midrange and high-frequency output from one mounting location. The horn-loaded high-frequency section is designed to improve projection so vocals, cymbals, guitars, and other upper-frequency information remain audible against wind, road, engine, and exhaust noise. Carbon-Fiber Cone and Neodymium Motor Diamond Audio uses a rigid carbon-fiber cone to provide a strong, lightweight moving surface capable of maintaining control at elevated playback levels. The neodymium motor provides high magnetic strength while reducing the size and weight associated with conventional ferrite magnet structures, making the platform particularly useful for motorcycle and powersports installations. PEN High-Frequency Diaphragm High-frequency reproduction is handled by a PEN — polyethylene naphthalate — diaphragm. Combined with the horn-loaded architecture, this design is intended to provide clean, efficient high-frequency output with strong forward projection. Choose 2Ω or 4Ω The MS652NEO is available in separate 2-ohm and 4-ohm configurations. The correct version should be selected based on amplifier output, number of speakers, channel configuration, wiring method, and final impedance presented to the amplifier. 2Ω — MS652NEO2 The 2-ohm version is suited to systems where the amplifier and channel configuration are designed to operate at a lower impedance and provide increased available power. 4Ω — MS652NEO4 The 4-ohm version provides greater flexibility for multi-speaker wiring and amplifier configurations where a higher final impedance is required. Dual Voice Coil and Bi-Amp Capability The MS652NEO uses a dual-voice-coil, bi-ampable architecture. This allows advanced system builders to configure the speaker differently depending on amplifier channel availability and DSP strategy. A properly designed bi-amped system can provide independent amplification and signal processing for different sections of the coaxial platform, allowing greater control over crossover points, output level, EQ, and time alignment. System-design note: Bi-amp capability does not mean the speaker must be bi-amped. Wiring, amplifier channels, crossover configuration, and DSP settings must be planned around the complete system and the selected 2Ω or 4Ω version. Cast-Aluminum Basket and Field-Serviceable Design The rigid cast-aluminum basket provides structural support and helps resist flex and vibration during high-output operation. Diamond Audio also specifies a field-serviceable voice-coil design, adding serviceability for demanding custom motorcycle, marine, and powersports systems. Built for Motorcycle and Powersports Audio With its compact 6.5-inch format, high-output architecture, and 3.43-inch mounting depth, the MS652NEO is suited to a wide range of custom motorcycle and powersports speaker locations where adequate physical clearance is available. Harley-Davidson custom audio systems. Road Glide and Street Glide fairing applications. Custom lower speaker pods. Saddlebag speaker installations. Tour-pack speaker locations. Custom fabricated speaker panels. Marine and powersports applications. Slingshot and UTV audio systems. Installation and Tuning Notes Select the 2Ω or 4Ω model based on amplifier loading and complete system design. Verify amplifier RMS output at the selected impedance. Confirm the 5.63-inch mounting cutout before modifying any factory or aftermarket panel. Verify the complete 3.43-inch mounting depth and rear motor clearance. Confirm the 6.65-inch overall diameter and grille clearance before final assembly. Determine whether the speaker will be conventionally powered or bi-amped before wiring. Use appropriate crossover protection based on amplifier power, installation location, and system goals. Secure all speaker mounting hardware for motorcycle vibration. Protect wiring and terminals from moisture, abrasion, heat, and moving components. Complete final DSP, EQ, crossover, and level tuning after the full system is installed. Diamond Audio MS NEO Coaxial Specifications Review the Diamond Audio MS NEO coaxial technical information before installation and system configuration. View MS NEO Coaxial Specifications Need Help Choosing 2Ω or 4Ω? The correct impedance depends on amplifier output, number of speakers, channel configuration, wiring method, DSP strategy, and the complete system design. Garage Bagger Stereo can help determine the correct MS652NEO version for your system. Start a Build Consultation Call 864-334-6131Sale -
SaleDiamond Audio MS652NEOS 6.5" 2-Way Coaxial Shallow Mount Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio MS652NEOS 6.5" Shallow-Mount Pro Coaxial Speakers — 2Ω or 4Ω The Diamond Audio MS652NEOS is the shallow-mount version of Diamond Audio's high-output 6.5-inch MS NEO pro coaxial platform. Built for motorcycle, powersports, marine, and custom audio systems where mounting depth is limited, it combines horn-loaded high-frequency projection with a rigid carbon-fiber cone and lightweight neodymium motor structure. Available in 2-ohm and 4-ohm versions, the MS652NEOS is rated at 200 watts RMS and uses a dual-voice-coil, bi-ampable architecture for advanced amplifier and DSP system configurations. THE REFERENCE STANDARD Pro Coaxial Output in a 2.74" Shallow-Mount Package Designed for tight fairings, pods, doors, and custom motorcycle installations where a full-depth 6.5-inch pro coaxial will not fit. Start a Build Consultation Call 864-334-6131 Diamond Audio MS652NEOS Key Specifications Series MS NEO Shallow Mount Speaker Size 6.5 inches Speaker Type 2-Way Horn-Loaded Pro Coaxial 2Ω Model MS652NEO2S 4Ω Model MS652NEO4S Power Handling 200W RMS / 400W MAX Sensitivity 93 dB (1W/1M) Voice Coil Configuration Dual Voice Coil Bi-Ampable Yes Field-Serviceable Voice Coil Yes Voice Coil Diameter 2 inches Cone Material Carbon Fiber High-Frequency Diaphragm PEN — Polyethylene Naphthalate Motor Neodymium Basket Cast Aluminum Surround Rubber Fs 151 Hz Mounting Depth 2.74″ (69.50 mm) Cutout Diameter 5.63″ (143 mm) Overall Diameter 6.29″ (159.68 mm) Overall Height 3.38″ (85.9 mm) Fitment warning: Shallow mount does not mean universal fitment. Verify the 5.63-inch cutout, 2.74-inch mounting depth, basket clearance, grille clearance, amplifier power, impedance, and complete system layout before ordering. 2.74" Shallow-Mount Pro Coaxial Design The biggest advantage of the MS652NEOS is its reduced installation depth. At only 2.74 inches deep, it gives system builders additional clearance in motorcycle fairings, factory speaker locations, shallow pods, doors, and custom enclosures where the standard-depth MS652NEO may not fit. The shallower chassis retains the core MS NEO architecture instead of moving to a conventional low-output automotive coaxial design. 200W RMS High-Output Pro Coaxial Performance The MS652NEOS is designed for open-air systems where projection and efficiency are critical. Diamond Audio rates the shallow-mount platform at 200 watts RMS, providing substantial power handling from a compact 6.5-inch driver. Its horn-loaded coaxial architecture helps maintain midrange and high-frequency presence against wind, road, engine, and exhaust noise. Carbon-Fiber Cone and Neodymium Motor The carbon-fiber cone provides a rigid, lightweight moving surface designed for responsive midrange and controlled midbass output at elevated playback levels. A high-efficiency neodymium motor provides strong magnetic force while helping Diamond Audio reduce the overall depth and weight of the speaker assembly. Horn-Loaded PEN High-Frequency Driver The MS652NEOS uses a PEN — polyethylene naphthalate — high-frequency diaphragm integrated into its horn-loaded coaxial architecture. The horn increases acoustic projection and efficiency, helping vocals and high-frequency information remain clear in motorcycle and other open-air listening environments. Choose 2Ω or 4Ω The MS652NEOS is available in separate 2-ohm and 4-ohm models. The correct impedance should be selected around the amplifier's output, number of speakers, channel configuration, wiring method, and final load presented to the amplifier. 2Ω — MS652NEO2S The 2-ohm shallow model is suited to systems designed to take advantage of increased amplifier output at a lower channel impedance. 4Ω — MS652NEO4S The 4-ohm shallow model provides additional flexibility for multi-speaker wiring and amplifier configurations requiring a higher final load. Dual Voice Coil and Bi-Amp Capability The MS652NEOS uses a dual-voice-coil, bi-ampable architecture that allows advanced system builders to configure amplification and DSP control around the needs of the complete system. In a properly designed bi-amped configuration, amplifier and DSP channels can provide more independent control over crossover, output level, EQ, and timing. System-design note: Bi-amp capability does not mean the speaker must be bi-amped. Wiring, amplifier channels, DSP configuration, and crossover strategy should be planned around the entire system. Built for Motorcycle and Powersports Installations The reduced mounting depth makes the MS652NEOS particularly useful in motorcycle installations where fairing, pod, enclosure, or factory-panel clearance limits the use of deeper high-output speakers. Harley-Davidson fairing speaker locations. Road Glide and Street Glide custom audio systems. Shallow lower-pod installations. Tour-pack speaker locations. Custom saddlebag speaker panels. Limited-depth fabricated enclosures. Slingshot and UTV audio systems. Marine and powersports installations. Standard MS652NEO vs MS652NEOS Shallow Mount MS652NEO Standard Depth 3.43″ MS652NEOS Shallow Depth 2.74″ Depth Reduction Approximately 0.69″ MS652NEOS Cutout 5.63″ MS652NEOS Overall Diameter 6.29″ Choose the shallow MS652NEOS when available mounting depth is the limiting factor. Do not assume the shallow version and standard version have identical external dimensions. Installation and Tuning Notes Select the 2Ω or 4Ω version based on amplifier loading and complete system design. Verify amplifier RMS output at the selected impedance. Confirm the 5.63-inch mounting cutout before modifying any panel. Verify the full 2.74-inch mounting depth and rear clearance. Confirm the 6.29-inch overall diameter and grille clearance. Determine whether the speaker will be conventionally powered or bi-amped before wiring. Use appropriate crossover protection based on amplifier power and installation location. Secure mounting hardware for motorcycle vibration. Protect wiring and terminals from moisture, heat, abrasion, and moving components. Complete final DSP, EQ, crossover, level, and time-alignment tuning after the system is installed. Diamond Audio MS NEO Coaxial Specifications Review the Diamond Audio MS NEO coaxial technical information before installation and system configuration. View MS NEO Coaxial Specifications Need Help Choosing the Correct MS NEO? The right speaker depends on mounting depth, amplifier output, impedance, number of speakers, wiring configuration, and DSP strategy. Garage Bagger Stereo can help determine whether the standard-depth or shallow MS652NEO platform is the better fit for your system. Start a Build Consultation Call 864-334-6131Sale -
DS18 PRO-HY6.4B 6.5" Pro Coaxial Speaker
Vendor:DS18The DS18 PRO-HY6.4B is a 6.5" hybrid mid-range loudspeaker with a built-in 1" titanium compression driver, sold as a single. One driver handles midrange and highs.Key Specs Power handling: 225W RMS / 450W max Nominal impedance 4 ohm; sensitivity 96dB (1W/1m) Frequency response: 100Hz-20kHz; recommended high-pass crossover 120Hz 1.5" (38.6mm) voice coil; water resistant paper cone, cloth surround Overall diameter 6.85" (174mm); front mount cutout 5.91" (150mm) Mounting depth 3.92" (99.5mm); overall depth 4.28" (108.8mm) Fitment and Installation NotesThis speaker is large for many fairings and packs and is not an all-fit solution for motorcycles. Check depth and cutout first, or consider the slim HY6 MSL.Browse more motorcycle pro coaxial speakers and DS18 motorcycle audio, or get a custom build planned around your bike.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
KICKER KMXL65 6.5" Marine Horn‑Loaded Coaxial Speakers w/ RGB LEDs
Vendor:KickerKICKER KMXL65 6.5" Marine Horn‑Loaded Coaxial Speakers premium marine horn‑loaded coaxial speakers with integrated RGB LED lighting. Built to REAL MARINE™ standards for long‑lasting performance on the water. Key Features Horn‑Loaded Compression Driver for smooth, high‑output sound Aluminum 1‑1/4″ tweeter domes with lightweight neodymium motor UV‑treated, waterproof poly/carbon‑fiber woofer cones IP66‑style build; Real Marine™ tested Integrated multi‑color RGB LED lighting White & charcoal grilles included; shallow‑mount design Specifications Woofer Size 6‑1/2" (160 mm) Tweeter Size / Dome 1‑1/4" (32 mm) Aluminum Impedance 4 Ω Recommended Amplifier Power (RMS) 15–150 W Peak Power 300 W Sensitivity (1W/1m) 92 dB Frequency Response 90–20,000 Hz Cutout / Mounting Hole 5‑7/16" (139 mm) Mounting Depth 3‑3/16" (81 mm) Crossover (rec.) 12 dB/oct high‑pass @ 80 Hz Grilles Both White & Charcoal Warranty 3 years (authorized purchase) What’s in the Box (2) speakers with white & charcoal grilles Wiring pigtails for audio and RGB Mounting hardware -
Wet Sounds Zero 6 XZ-B | Wet Sounds High-Output 6.5" Marine Coaxial Speakers
Vendor:Wet SoundsWater Resistant Mid-Range Loudspeaker with Built-in Driver The ZERO 6 Series is a first of its kind innovation for Wet Sounds, the most advanced design available for the motorcycle, powersports & marine market, taking the legendary REV tower speaker performance and reimagining it for optimal use in more confined spaces. The high-output in small, sealed enclosures means ZERO Series allows for ZERO compromises. These speakers can also be used with or without a twist-lock grille, making them ideal for both custom and OEM replacement applications. The ZERO Series speakers utilize materials such as Nylas, a composite of nylon and fiberglass, providing improved stability and superior strength versus conventional speaker materials. Features: Shallow mount design Twist-lock grille to hide mounting hardware Available in a 2 tone gloss/matte finish in black or white Install with or without grille Incorporated motor heatsink High Strength Nylas Composite Frame Rigid PMGS Composite Cone TPR Surround Suspension System Reinforced Nomex Aramid Spider Oversized Neo motors for high power handling Horn-loaded tweeter Optimized for the demanding environments Sold in pairs All weather Specifications: Speaker Series: ZERO Grill Style: XZ RGB Backlighting: No Tweeter Size: 1" Horn-Loaded Titanium Dome RMS Watts: 100W PEAK Watts: 200W Speaker Size: 6.5" Weight: 2.4 lbs (1.08 Kg) Impedance: 4Ω Mounting Depth: 2.72” (69 mm) Hole Cut Out: 5.63” (143 mm) Frequency Response: 65 Hz - 20 KHz Sensitivity: 90 dB at 1W/m Diameter: 6.89” w/grill (175 mm)
Three 6.5" Pro Marine Designs
The Kicker KMXL65 is a marine horn-loaded coaxial with RGB LEDs. The Kicker MSS65 is a marine component speaker with RGBW LEDs, so it uses separate drivers. Wet Sounds' Zero 6 XZ-B is a high-output 6.5" marine coaxial.
At a Glance
| KMXL65 | Horn-loaded coaxial, RGB LEDs |
| MSS65 | Component speaker, RGBW LEDs |
| Zero 6 XZ-B | High-output coaxial, Wet Sounds |
Pro or Standard?
If you do not need a horn-loaded or component design, the 6.5" marine coaxial speakers include thin-mount and LED options. Start a build consultation or call 864-334-6131.
Related Marine Audio Collections
Marine Pro Coaxial Speakers 6.5" FAQ
What is the difference between the KMXL65 and MSS65?
The KMXL65 is a horn-loaded coaxial with RGB LEDs and the MSS65 is a component speaker with RGBW LEDs, per their titles.
Which 6.5" model comes from Wet Sounds?
The Zero 6 XZ-B high-output marine coaxial.
Where are the standard 6.5" coaxials?
In the 6.5" Marine Coaxial Speakers collection.
Need Help Choosing 6.5" Marine Pro Coaxials?
Tell us about your boat, your amplifier and the speaker or subwoofer locations, and a Garage Bagger Stereo specialist will help you pick the right parts.