-
Sale1998-2013 Harley Davidson Plug and Play Audio System (DS18)
Vendor:DS18 Motorcycle Audio1998-2013 HARLEY PLUG AND PLAY AUDIO 1998-2013 Harley-Davidson Plug and Play Audio System | DS18 This plug and play audio system is built for 1998-2013 Harley-Davidson Road Glide and Street Glide models using a DS18 ION1600.4D four-channel amplifier, two DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers, a bike-specific amplifier rack, and radio-specific plug and play wiring. Check Fitment What’s Included DS18 Power for 1998-2013 Harley Touring Road Glide and Street Glide options Plug and play for stock Harley radio Plug and play for aftermarket radio DS18 ION1600.4D four-channel amplifier DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers Bike-specific amp rack and radio-specific wiring included DS18 Plug and Play Harley Audio Upgrade The 1998-2013 Harley-Davidson Plug and Play Audio System with DS18 is designed for riders who want a louder, cleaner, and more aggressive audio upgrade without piecing together random parts. This bundle gives you the core components needed to upgrade the fairing speaker system on compatible Road Glide and Street Glide models. With the DS18 ION1600.4D four-channel amplifier and DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers, this system is built for strong output, efficient power, and better performance than basic factory Harley audio. What Comes in the Kit DS18 ION1600.4D four-channel amplifier 2 x DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers Bike-specific amplifier rack Radio-specific plug and play wiring Fitment and Options Motorcycle Fitment 1998-2013 Harley-Davidson Road Glide and Street Glide models Bike Model Options Road Glide or Street Glide Radio Options Plug and play for stock Harley radio or aftermarket radio Amplifier DS18 ION1600.4D four-channel amplifier Speakers 2 x DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers Amplifier Rack Bike-specific amplifier rack included Wiring Radio-specific plug and play wiring included Installation Type Plug and play audio system Why This DS18 Kit Makes Sense Matched DS18 System This bundle combines DS18 amplifier power, DS18 6.5 inch speakers, a bike-specific rack, and radio-specific wiring into one cleaner Harley audio package. Road Glide and Street Glide Options Select the correct model option so the kit is built around your 1998-2013 Harley-Davidson Touring fairing setup. Stock or Aftermarket Radio Choose the correct radio option so the plug and play wiring matches your current source unit setup. ION1600.4D Amplifier The DS18 ION1600.4D gives this kit strong four-channel amplifier power in a compact motorcycle-friendly package. Hybrid Slim Loudspeakers The DS18 PRO-HY6 MSL speakers are built for loud, clear motorcycle audio where output and fitment matter. GBS Built Bundle Garage Bagger Stereo builds plug and play Harley audio packages around real motorcycle audio needs, not generic car audio parts. Best For 1998-2013 Harley-Davidson Road Glide audio upgrades 1998-2013 Harley-Davidson Street Glide audio upgrades Riders upgrading from factory fairing speakers Harley owners wanting a DS18 amp and speaker package Stock radio and aftermarket radio audio builds Motorcycle audio systems that need loud, clear speaker output Important Ordering Notes Choose the correct bike model and radio type before ordering. Road Glide and Street Glide kits use bike-specific parts, and the wiring setup may differ depending on whether your bike has the stock Harley radio or an aftermarket radio. If you are not sure which option is correct for your bike, contact Garage Bagger Stereo before placing your order. Related Motorcycle Audio Categories Harley Audio Kits 2014-2023 Harley Plug and Play Kits 2023.5+ Harley Plug and Play Kits Harley Plug and Play Amplifiers Speakers and Amplifiers Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Brands in This Kit DS18 Motorcycle Audio Motorcycle 6.5 Pro Coaxial Speakers Motorcycle Audio Installation in Taylors, SC FAQ Will this kit fit both Road Glide and Street Glide models? Yes. This bundle has options for 1998-2013 Harley-Davidson Road Glide and Street Glide models. Choose the correct bike model before ordering. Does this kit work with the stock Harley radio? Yes. This kit can be ordered plug and play for the stock Harley radio. Does this kit work with an aftermarket radio? Yes. This kit also has an aftermarket radio option. Select the correct radio type before ordering. Are the speakers included? Yes. This kit includes two DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers. Is wiring included? Yes. Radio-specific plug and play wiring is included for the selected kit configuration. Need Help Choosing the Right DS18 Kit? Call Garage Bagger Stereo before ordering if you are unsure whether your 1998-2013 Harley-Davidson Road Glide or Street Glide needs the stock radio or aftermarket radio version. Call 864-334-6131 Ask GBS for HelpSale -
2014-2023 Harley-Davidson 2-Speaker Plug and Play Audio System | DS18
Vendor:DS18 Motorcycle Audio2014–2023 ROAD GLIDE OR STREET GLIDE 2014–2023 Harley-Davidson 2-Speaker Plug-and-Play Audio System | DS18 Upgrade a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide with a complete two-speaker audio system built around a DS18 ION1600.4D amplifier, two high-output 6.5-inch hybrid speakers, factory-radio integration and the primary power, mounting and installation components required for the selected motorcycle. Select Road Glide or Street Glide before ordering so the system can be supplied with the correct fairing-specific amplifier mounting configuration. Two amplifier channels power the included speakers, while two channels remain available for a properly matched future rear-speaker upgrade. Check Motorcycle Fitment See Everything Included Complete Two-Speaker Audio System Road Glide and Street Glide options Compatible 2014–2023 Harley-Davidson Touring platform DS18 ION1600.4D four-channel Class-D amplifier Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers 4-ohm nominal impedance per speaker 150 watts RMS per included speaker Built-in 1-inch titanium compression drivers DS18 factory-radio plug-and-play harness 4-AWG amplifier power wiring Bike-specific amplifier mounting solution Two amplifier channels available for future expansion Complete 2-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package combines the amplifier, front fairing speakers, factory-radio signal interface, power wiring and motorcycle-specific mounting components required to build a complete two-speaker audio system in a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide. The included DS18 PRO-HY6.4MSL speakers combine a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. The hybrid design delivers the midrange projection and high-frequency output needed to overcome motorcycle, road and wind noise. The DS18 ION1600.4D provides four channels of full-range Class-D power. Two channels operate the included fairing speakers. The remaining two channels can support a compatible rear-speaker pair after the correct speakers, wiring, mounting hardware and amplifier setup are added. Plug-and-play clarification: The included RY-HARNESS.HD provides a plug-and-play connection to compatible factory Harley-Davidson radio wiring. The complete installation still requires amplifier power wiring, speaker mounting, secure amplifier mounting and proper gain and crossover setup. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible 2014–2023 sharknose-fairing motorcycle. This option must include the amplifier rack and front-speaker installation components configured for the Road Glide fairing. 2014–2023 Road Glide fairing configuration Road Glide-specific amplifier mounting solution Two front fairing speakers Factory-radio integration harness Street Glide Option Select Street Glide for a compatible 2014–2023 batwing-fairing motorcycle. This option must include the amplifier rack and front-speaker installation components configured for the Street Glide fairing. 2014–2023 Street Glide fairing configuration Street Glide-specific amplifier mounting solution Two front fairing speakers Factory-radio integration harness Confirm the motorcycle before ordering: Verify the model year, exact trim, Road Glide or Street Glide fairing, factory radio, factory amplifier configuration and any existing audio modifications. Everything Included in the Audio System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms and 800 watts RMS × 2 bridged at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers One pair of 6.5-inch shallow hybrid speakers with 4-ohm impedance, 150-watt RMS power handling and built-in 1-inch titanium compression drivers. DS18 RY-HARNESS.HD A factory-radio plug-and-play amplifier harness with four-channel RCA pre-output, oxygen-free copper wiring and water-resistant construction. NVS 4-AWG Amplifier Power Kit Heavy-gauge amplifier power and ground wiring with quick-disconnect hardware for cleaner installation, saddlebag removal and future servicing. Front-Speaker Installation Components Fairing-specific speaker spacers, mounting hardware and installation components are supplied according to the selected Road Glide or Street Glide configuration. Bike-Specific Amplifier Rack The selected motorcycle option includes a Road Glide- or Street Glide-specific amplifier mounting solution for a secure, vibration-resistant installation. Two-speaker system: Rear speakers, saddlebag speaker adapters, speaker lids, rear-speaker wiring and rear grilles are not included unless specifically added to the order. Speaker Impedance and Amplifier Channel Configuration Front-Left Speaker One PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated ION1600.4D amplifier channel. Front-Right Speaker The second PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Two Available Channels Two amplifier channels remain available for compatible future rear speakers after the required wiring and mounting components are installed. Included Speaker Count Two speakers / one pair Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Amplifier Output at 4Ω 240W RMS per channel Front-Left Channel One PRO-HY6.4MSL speaker at 4Ω Front-Right Channel One PRO-HY6.4MSL speaker at 4Ω Loaded Amplifier Channels Two Available Amplifier Channels Two Bridging Required No Output must be limited correctly: The ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The DS18 ION1600.4D is a compact full-range Class-D amplifier that provides substantial output from a motorcycle-friendly chassis. It can power the included two-speaker system while retaining two channels for a properly designed future expansion. 240W × 4 at 4Ω Published four-channel output for compatible 4-ohm speaker systems. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm speaker systems. 800W × 2 Bridged Published bridged output into compatible 4-ohm speaker loads. Four Full-Range Channels Two channels operate the included speakers while two remain available for future rear-speaker expansion. Compact Chassis The amplifier is designed to deliver high output from a compact installation footprint. System Setup Controls Gain and crossover controls allow the output to be configured for the included hybrid speakers. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 channels Output at 2Ω 400W RMS × 4 channels Bridged Output at 4Ω 800W RMS × 2 channels Minimum Stereo Impedance 2Ω per channel Minimum Bridged Impedance 4Ω System Configuration Two channels used and two channels available Built-In DSP No Power Wiring 4-AWG amplifier wiring required DS18 PRO-HY6.4MSL 6.5-Inch Hybrid Speakers Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. The two-way hybrid design provides both midrange and upper-frequency output from the front fairing speaker locations. 150W RMS Each included speaker is rated for 150 watts RMS and 300 watts maximum. 4-Ohm Impedance Each speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Hybrid Two-Way Design A built-in titanium compression driver supplies high-frequency output without a separately mounted tweeter. Shallow Mounting Depth The 2.82-inch mounting depth supports tighter motorcycle fairing installations. IP65 Rated Water-resistant construction helps protect the speakers in motorcycle and powersports environments. 140Hz High-Pass Reference DS18 publishes 140Hz as the recommended high-pass crossover reference for this speaker. Speaker Model DS18 PRO-HY6.4MSL Quantity Included Two speakers / one pair Nominal Size 6.5 inches / 165.1mm Nominal Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Sensitivity 93dB, 1W / 1m Frequency Response 100Hz–20kHz Recommended High-Pass Crossover 140Hz Speaker Design Two-way shallow hybrid loudspeaker Midrange Voice Coil 1.5 inches / 38.6mm Compression Driver 1-inch titanium diaphragm with neodymium magnet Cone Material Water-resistant treated paper Weather Rating IP65 Mounting Cutout 5.6 inches / 142mm Mounting Depth 2.82 inches / 72mm Protective Grille Included with each speaker Check fairing clearance: Pod modification, magnet-cap clearance work, additional speaker spacing or other installation adjustments may be required depending on the exact motorcycle and factory enclosure. Factory Harley-Davidson Radio Integration The DS18 RY-HARNESS.HD connects a compatible 2014–2023 factory Harley-Davidson radio system to the aftermarket amplifier without cutting the primary factory-radio signal wiring. OEM Plug-and-Play Connection Factory-style connections simplify amplifier signal integration. Four-Channel RCA Pre-Output Four RCA channels support the included four-channel amplifier and future rear-speaker expansion. OFC Wiring Oxygen-free copper conductors and noise-rejecting RCA connections support reliable signal transfer. Designed for compatible 2014–2023 Street Glide and Road Glide models Factory-radio plug-and-play connection Four-channel RCA pre-output Oxygen-free copper wiring Water-resistant harness construction No cutting of the primary factory-radio signal wiring Factory configuration matters: Motorcycles with a factory amplifier, CVO equipment, aftermarket radio or previous audio modifications may require additional signal-integration work. Power Wiring and Amplifier Mounting 4-AWG Amplifier Wiring The included NVS power kit provides the heavy-gauge power and ground wiring needed for the amplifier, along with quick-disconnect connections for serviceability. Road Glide or Street Glide Rack Road Glide and Street Glide fairings use different amplifier mounting layouts. The selected motorcycle option determines the mounting solution supplied with the kit. Disconnect the motorcycle battery before installation. Mount the amplifier securely with adequate airflow. Install the correct fuse protection near the battery connection. Protect wiring from steering movement, sharp edges and heat. Use clean, secure power and ground connections. Verify all rack and fairing hardware before final assembly. Inspect battery and charging-system condition before high-output use. Gain and Crossover Setup Correct setup is required because the ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Connect one included speaker to each of two amplifier channels. Do not bridge the amplifier channels for the included speakers. Configure the two active channels for high-pass operation. Use 140Hz as the published speaker high-pass reference. Adjust the final crossover for the fairing and intended output level. Set amplifier gain using measured clean output. Do not use the amplifier gain control as a volume control. Reduce output immediately if distortion or mechanical noise is heard. Verify speaker polarity before closing the fairing. Professional setup recommended: Incorrect gain or crossover settings can damage the included speakers even when the system initially appears to play normally. Future Rear-Speaker Expansion The two unused amplifier channels provide a direct path for a future rear-speaker upgrade. Rear expansion must be designed around compatible speaker impedance, RMS power handling, mounting depth, wiring and crossover requirements. Already Available in the System Two unused amplifier channels Four-channel factory-radio interface Independent amplifier channel controls 4-AWG amplifier power foundation Required for Rear Expansion Compatible rear speakers Saddlebag lids, adapters or speaker pods Rear-speaker wiring and connectors Correct impedance and RMS-power matching Final crossover and gain setup Rear equipment is not included: This remains a two-speaker audio system until compatible rear speakers, mounting components and wiring are purchased and installed. Complete System Specifications System Type Two-speaker plug-and-play motorcycle audio system Motorcycle Options Road Glide or Street Glide Vehicle Application Compatible 2014–2023 Harley-Davidson models Amplifier DS18 ION1600.4D four-channel Class-D amplifier Amplifier Output at 4Ω 240W RMS × 4 channels Included Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Loaded Amplifier Channels Two channels at 4Ω each Available Amplifier Channels Two Factory-Radio Interface DS18 RY-HARNESS.HD Power Wiring NVS 4-AWG amplifier power kit with quick disconnect Amplifier Mounting Road Glide- or Street Glide-specific mounting solution Built-In DSP No Rear Speakers Included No Shopify Option Choose Road Glide or Street Glide Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, exact model, fairing style, factory radio, factory amplifier and current speaker configuration before ordering. Select Road Glide or Street Glide before adding the kit to the cart. The package includes two front fairing speakers. Each included speaker has a nominal 4-ohm impedance. Two amplifier channels remain available for future expansion. The amplifier does not include built-in DSP. Factory-amplified motorcycles may require additional integration. Speaker pod modification or additional spacing may be required. Correct gain and high-pass crossover setup are required. Rear speakers and rear mounting components are not included. Professional installation and system setup are recommended. Best For 2014–2023 Harley-Davidson Road Glide audio upgrades 2014–2023 Harley-Davidson Street Glide audio upgrades Riders retaining a compatible factory Harley-Davidson radio High-output two-speaker fairing systems Riders planning to add saddlebag speakers later Four-channel systems designed for staged expansion Professional motorcycle audio installations Related Motorcycle Audio Categories Speakers and Amplifiers Shop Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Parts Signal and Electrical Support Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Plan a Complete Motorcycle Audio System Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries DS18 2-Speaker Plug-and-Play Audio System FAQ How many speakers are included? The system includes two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers for the front fairing. What impedance are the included speakers? Each included speaker has a nominal impedance of 4 ohms. How much power can each speaker handle? Each PRO-HY6.4MSL is rated for 150 watts RMS and 300 watts maximum. How much power does the amplifier produce at 4 ohms? The ION1600.4D is rated for up to 240 watts RMS on each of its four channels at 4 ohms. Is the amplifier too powerful for the speakers? The amplifier can produce more continuous power than each speaker is rated to handle. It can be used safely when gain, high-pass crossover and maximum clean output are configured correctly. Are all four amplifier channels used? No. The supplied two-speaker system uses two channels. Two additional channels remain available for a compatible future rear-speaker pair. Does the system work with the factory Harley-Davidson radio? The included RY-HARNESS.HD is designed to integrate an aftermarket amplifier with compatible 2014–2023 Harley-Davidson factory radios. Does the factory radio wiring need to be cut? The compatible factory-radio signal connection uses a plug-and-play harness and does not require cutting the primary factory signal wiring. Does the amplifier include DSP? No. The ION1600.4D provides conventional gain and crossover controls but does not include digital signal processing. Are the speakers weather resistant? Yes. The speakers are IP65 rated and use a water-resistant treated paper cone. They should not be described as submersible. Can rear speakers be added later? Yes. The two available amplifier channels can power a properly matched rear-speaker pair after the required speakers, mounting hardware, wiring and system setup are added. Is the Road Glide amplifier rack the same as the Street Glide rack? No. Road Glide and Street Glide fairings require different amplifier mounting configurations. Select the correct motorcycle option before ordering. Will the speakers fit without modification? Fitment depends on the exact fairing enclosure and existing equipment. Speaker pod modification, additional spacing or other clearance work may be required. Are saddlebag speakers included? No. This is a two-speaker audio system. Rear speakers, saddlebag mounting components and rear-speaker wiring must be purchased separately. Need Help Matching This 2-Speaker Harley Audio System? Garage Bagger Stereo can help verify Road Glide or Street Glide fitment, speaker impedance selection, amplifier matching, fairing and amplifier mounting, power and speaker wiring, and factory-radio signal integration before installation. Installation Services Request a Custom Build -
2014-2023 Harley-Davidson Road & Street Glide 4-Speaker Audio System | DS18 / Cerwin-Vega
Vendor:DS18 Motorcycle Audio2014-2023 HARLEY-DAVIDSON FOUR-SPEAKER SYSTEM Road Glide & Street Glide Plug-and-Play Audio System Upgrade a compatible 2014-2023 Harley-Davidson Road Glide or Street Glide with a complete four-speaker package built around DS18 amplifier power, hybrid front speakers and Cerwin-Vega 6×9 saddlebag speakers. The factory-radio signal connection is handled through a DS18 plug-and-play harness. Select the correct motorcycle before ordering so the package can be configured with the proper fairing-specific amplifier mounting solution. Check Fitment See Everything Included Complete Front and Rear Audio Upgrade Road Glide and Street Glide options Designed for compatible 2014-2023 Harley Touring models DS18 ION1600.4D four-channel amplifier 240 watts RMS × 4 channels at 4 ohms Two DS18 PRO-HY6.4MSL front speakers Two Cerwin-Vega ST69CX 6×9 rear speakers Four 4-ohm speaker channels Factory Harley radio integration harness 4-AWG amplifier power wiring Cut-in saddlebag lid installation system Complete Harley Audio System Overview This Garage Bagger Stereo package combines the front fairing speakers, rear saddlebag speakers, four-channel amplifier, factory-radio interface, power wiring and motorcycle-specific mounting components required for a complete 2014-2023 Harley-Davidson Touring audio upgrade. Two DS18 PRO-HY6.4MSL hybrid loudspeakers upgrade the front fairing locations. Each speaker combines a 6.5-inch midrange driver with an integrated titanium compression driver to produce strong vocal clarity and high-frequency projection in open-air riding conditions. The Cerwin-Vega cut-in lid system adds two ST69CX 6×9 speakers to the factory saddlebag lids. All four speakers connect to individual channels of the DS18 ION1600.4D amplifier. Important installation distinction: The factory-radio interface is plug-and-play, but the rear-speaker installation is not cutting-free. Both compatible factory saddlebag lids must be permanently cut using the supplied templates. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible 2014-2023 sharknose-fairing motorcycle. The package must include the amplifier mounting solution configured for the Road Glide fairing. Street Glide Option Select Street Glide for a compatible 2014-2023 batwing-fairing motorcycle. The package must include the amplifier mounting solution configured for the Street Glide fairing. Factory-radio application: The included DS18 RY-HARNESS.HD is designed around compatible factory Harley-Davidson radio integration. Aftermarket-radio installations may require a different signal and remote-turn-on configuration. Confirm the motorcycle year and exact model. Select Road Glide or Street Glide before adding the kit to the cart. Confirm that the motorcycle retains a compatible factory radio. Identify any factory amplifier or CVO audio equipment before ordering. Verify that the motorcycle has compatible factory saddlebag lids. Everything Included in the System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers Two 6.5-inch 4-ohm hybrid loudspeakers with built-in 1-inch titanium compression drivers for the front fairing. DS18 RY-HARNESS.HD Factory-radio plug-and-play interface with four-channel RCA outputs, integrated high-to-low conversion, OFC wiring and amplifier remote turn-on. 4-AWG Amplifier Power Kit Heavy-gauge amplifier power and ground wiring with the protection and installation hardware configured for the package. Bike-Specific Amplifier Mounting The package is configured with a Road Glide or Street Glide mounting solution according to the motorcycle selected at checkout. Cerwin-Vega 6×9 Lid Kit One pair of 4-ohm ST69CX 6×9 speakers with cut-in lid grilles, left and right templates, half-inch spacers and speaker wiring. Confirm current package contents: Product substitutions or mounting-hardware changes should be reflected in the Shopify variant and fulfillment notes before the order is released. Speaker Impedance and Amplifier Channel Configuration Front Fairing Channels Each DS18 PRO-HY6.4MSL front speaker presents a nominal 4-ohm load to its assigned amplifier channel. Rear Saddlebag Channels Each Cerwin-Vega ST69CX rear speaker presents a nominal 4-ohm load to its assigned amplifier channel. Channel 1 Front-left PRO-HY6.4MSL — 4Ω Channel 2 Front-right PRO-HY6.4MSL — 4Ω Channel 3 Rear-left ST69CX — 4Ω Channel 4 Rear-right ST69CX — 4Ω Amplifier Output at 4Ω 240 watts RMS per channel Front Speaker Rating 150 watts RMS per speaker Rear Speaker Rating 125 watts RMS per speaker Unused Amplifier Channels None Output must be limited: The ION1600.4D can produce more continuous power at 4 ohms than either included speaker model is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The ION1600.4D is a compact full-range Class-D amplifier with high-level and RCA inputs, adjustable filtering, a cooling fan and power, protection and clipping indicators. 240W × 4 at 4Ω Published output for the four included 4-ohm speaker channels. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm systems. 800W × 2 Bridged Published bridged output into compatible 4-ohm loads. Adjustable Crossovers Selectable low-pass, high-pass and full-range operating modes. Clip Indicator Visual clipping indication assists with measured gain setup. Compact Motorcycle Installation Small chassis with vibration-resistant surface-mount construction. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 Output at 2Ω 400W RMS × 4 Bridged Output at 4Ω 800W RMS × 2 Frequency Response 10Hz–20kHz Signal-to-Noise Ratio Greater than 95dB Input Range 0.2–6V Crossover Modes LPF / HPF / FULL Crossover Range 40Hz–2kHz Minimum Impedance 2Ω stereo / 4Ω bridged Power Input 4-AWG Published External Fuse 140A Cooling Fan Yes Dimensions 7.32 × 4.72 × 2 inches / 186 × 120 × 52mm DS18 PRO-HY6.4MSL Front Fairing Speakers The PRO-HY6.4MSL combines a slim 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. This hybrid construction provides midrange and high-frequency output from one compact speaker. Speaker Model PRO-HY6.4MSL Quantity Two speakers Nominal Size 6.5 inches Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Frequency Response 100Hz–20kHz Sensitivity 97dB Compression Driver 1-inch titanium diaphragm Speaker Cone Water-resistant treated paper Weather Rating IP65 Mounting Depth 2.82 inches / 72mm Check fairing clearance: Speaker pod modification, spacing or other installation adjustments may be required depending on the motorcycle model, factory enclosure and existing components. Cerwin-Vega ST69CX 6×9 Saddlebag Speakers The rear system uses one pair of Cerwin-Vega ST69CX 4-ohm 6×9 coaxial speakers. The cut-in kit converts compatible factory saddlebag lids into rear speaker locations without requiring replacement painted lids. Speaker Model Cerwin-Vega ST69CX Quantity Two speakers / one pair Speaker Size 6×9 inches Speaker Design Two-way high-output coaxial speaker Impedance 4Ω per speaker Power Handling 125W RMS / 250W maximum per speaker Tweeter Titanium dome Sensitivity 93.5dB Mounting Depth 3.875 inches Included Lid Components Grilles, templates, half-inch spacers and speaker wiring Water-resistant, not waterproof: Protect the speakers from direct heavy water exposure and follow the manufacturer’s care instructions. Factory Radio Integration The DS18 RY-HARNESS.HD connects to compatible 2014-2023 Harley-Davidson factory-radio wiring and supplies the low-level signal and remote turn-on needed for aftermarket amplifier integration. Four RCA Outputs Provides four low-level channels for the four-channel amplifier. Integrated Conversion Built-in load resistors and high-to-low conversion condition the factory signal. Remote Turn-On Supplies amplifier activation when the compatible factory radio turns on. Factory harness connection without cutting the radio signal wiring Four-channel RCA pre-output Oxygen-free copper wiring Noise-rejecting RCA construction Water-resistant harness construction Compatible factory-radio applications only Saddlebag Lid Installation The supplied cut-in kit uses model-specific left and right templates to create the 6×9 speaker openings in compatible factory saddlebag lids. The grilles and half-inch spacer rings complete the visible installation. Remove and inspect both saddlebag lids before cutting. Confirm template orientation for the left and right lids. Check speaker depth and electrical-lock clearance. Confirm hinge, tether and weather-seal clearance. Route the rear-speaker wiring before final assembly. Seal and protect all cut edges after modification. Test speaker polarity before reinstalling the lids. Permanent modification: Cutting the factory saddlebag lids is irreversible. Professional installation is recommended when the installer is not experienced with Harley-Davidson lid conversions. Amplifier Setup and Speaker Protection The amplifier has significantly more available power at 4 ohms than the included front and rear speakers are rated to handle continuously. Measured setup is essential to prevent damage. Connect one speaker to each amplifier channel. Set the amplifier channels to high-pass operation. Set separate front and rear gains when the amplifier layout permits. Use measured clean voltage rather than setting gain by ear. Do not use the amplifier gain control as a volume control. Watch the clipping indicator during setup. Reduce output immediately if distortion or mechanical noise is heard. Confirm the correct external fuse near the battery. Evaluate battery and charging-system condition before high-output use. Complete System Specifications Vehicle Application Compatible 2014-2023 Harley-Davidson Road Glide or Street Glide Motorcycle Options Road Glide or Street Glide Radio Application Compatible factory Harley-Davidson radio Amplifier DS18 ION1600.4D Amplifier Output 240W RMS × 4 at 4Ω Front Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Rear Speakers Two Cerwin-Vega ST69CX 6×9 coaxial speakers Speaker Impedance 4Ω per speaker Loaded Amplifier Channels All four channels at 4Ω each Factory Radio Harness DS18 RY-HARNESS.HD Power Wiring 4-AWG amplifier installation kit Amplifier Mounting Bike-specific Road Glide or Street Glide mounting solution Rear Mounting Cerwin-Vega 6×9 cut-in saddlebag lid system Saddlebag Cutting Required Yes Built-In DSP No Fitment and Ordering Notes Submit the complete motorcycle information: Confirm the year, exact model, Road Glide or Street Glide fairing, factory radio, factory amplifier configuration and current speaker locations. Select Road Glide or Street Glide before ordering. The included radio harness is intended for compatible factory radios. Two front and two rear speakers are included. All four included speakers are 4 ohms. All four amplifier channels are used. The amplifier does not include built-in DSP. Front speaker pod modification or spacing may be required. Both factory saddlebag lids require permanent cutting. Correct amplifier gain and crossover setup are required. Professional installation is strongly recommended. Best For 2014-2023 Harley-Davidson Road Glide audio upgrades 2014-2023 Harley-Davidson Street Glide audio upgrades Riders keeping a compatible factory Harley radio Four-speaker front-and-rear audio systems Motorcycles using factory saddlebag lids High-output highway audio builds Professional motorcycle audio installations Related Motorcycle Audio Categories 2014-2023 Harley Audio 2014-2023 Harley Plug-and-Play Kits Shop Motorcycle Speakers Motorcycle Amplifiers System Components Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Harley Four-Speaker Audio System FAQ Which motorcycles does this system fit? It is configured for compatible 2014-2023 Harley-Davidson Road Glide and Street Glide motorcycles. Select the correct fairing style before ordering. How many speakers are included? Four speakers are included: two DS18 6.5-inch front speakers and two Cerwin-Vega 6×9 rear saddlebag speakers. What impedance are the speakers? All four included speakers have a nominal impedance of 4 ohms. How much power does the amplifier produce? The ION1600.4D produces 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms or 800 watts RMS × 2 bridged at 4 ohms. Does the amplifier include DSP? No. The ION1600.4D provides conventional gain and crossover controls but does not contain an integrated digital signal processor. Does this work with the factory Harley radio? The included RY-HARNESS.HD is designed to integrate the amplifier with compatible 2014-2023 factory Harley-Davidson radios. Does the factory radio wiring need to be cut? The compatible factory-radio signal connection uses the plug-and-play DS18 harness and does not require cutting the factory signal wiring. Do the saddlebag lids need to be cut? Yes. Both compatible factory saddlebag lids must be permanently cut to install the Cerwin-Vega 6×9 lid system. Are the speakers waterproof? The DS18 front speakers are IP65 rated, and the Cerwin-Vega rear speakers are water resistant. They should not be represented as submersible or completely waterproof. Why does the amplifier need careful gain setup? The amplifier can produce more continuous power per channel than the included speakers are rated to handle. Gain and crossover settings must limit clean output to safe levels. Is a Road Glide amplifier rack included with the Street Glide version? No. The mounting solution must match the selected motorcycle. The Road Glide and Street Glide versions require different fairing-specific mounting configurations. Is professional installation recommended? Yes. The package requires amplifier wiring, measured gain setup, fairing work and permanent saddlebag lid modification. Need Help Matching This Harley Audio System? Garage Bagger Stereo can help verify motorcycle fitment, speaker impedance selection, amplifier matching, fairing and saddlebag mounting, power and speaker wiring, and factory-radio signal integration before installation. Installation Services Request a Custom Build -
2023.5+ Harley-Davidson 2-Speaker Plug and Play Audio System | DS18
Vendor:DS18 Motorcycle Audio2023.5+ HARLEY-DAVIDSON PLUG-AND-PLAY AUDIO 2023.5+ Harley-Davidson 2-Speaker Plug-and-Play Audio System | DS18 Upgrade a compatible 2023.5 and newer Harley-Davidson Road Glide or Street Glide with a complete two-speaker audio system built around a DS18 four-channel amplifier, two high-output hybrid fairing speakers, NAV-TV factory A2B integration and the primary power and installation components required for the system. Select Road Glide or Street Glide before ordering so the correct motorcycle configuration can be supplied. Two amplifier channels power the included front speakers, while two channels remain available for a properly matched future rear-speaker upgrade. Check Motorcycle Fitment See Everything Included Complete Two-Speaker Audio System Road Glide and Street Glide options Designed for compatible late-model Harley A2B systems DS18 ION1600.4D four-channel Class-D amplifier 240 watts RMS × 4 channels at 4 ohms Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers 150 watts RMS per included speaker 4-ohm nominal impedance per speaker Built-in 1-inch titanium compression drivers NAV-TV ZEN-H A2B factory-radio integration 4-AWG amplifier power wiring Half-inch speaker spacers included Two amplifier channels available for expansion Complete 2-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package combines the amplifier, two front fairing speakers, factory A2B signal interface, amplifier power wiring and speaker-spacing components required to build a high-output two-speaker audio system in a compatible late-model Harley-Davidson Road Glide or Street Glide. The included DS18 PRO-HY6.4MSL speakers combine a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. This hybrid design produces both midrange and high-frequency output from each fairing speaker location. The DS18 ION1600.4D supplies four full-range amplifier channels. Two channels operate the included front speakers. The remaining channels can support a properly matched rear-speaker pair after the required speakers, wiring, mounting components and amplifier setup are added. Plug-and-play clarification: The NAV-TV interface provides plug-and-play factory A2B signal integration. The complete installation still requires amplifier power wiring, speaker mounting, proper cable routing and measured gain and crossover setup. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible late-model sharknose-fairing motorcycle using the factory Harley-Davidson A2B audio platform. Road Glide fairing configuration Two front fairing speakers Half-inch speaker spacers NAV-TV A2B integration Street Glide Option Select Street Glide for a compatible late-model batwing-fairing motorcycle using the factory Harley-Davidson A2B audio platform. Street Glide fairing configuration Two front fairing speakers Half-inch speaker spacers NAV-TV A2B integration Exact model verification required: Confirm the motorcycle year, model, trim, factory radio, factory amplifier, A2B configuration and existing audio equipment before ordering. Not every motorcycle described broadly as 2023.5+ uses identical factory audio hardware or fairing geometry. Current Plug-and-Play Kit Lead Time The current listed fulfillment time for this plug-and-play system is approximately 5–10 business days. Build time may vary with component availability and motorcycle configuration. Everything Included in the Audio System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms and 800 watts RMS × 2 bridged at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers One pair of 6.5-inch shallow hybrid speakers with 4-ohm impedance, 150-watt RMS power handling and built-in 1-inch titanium compression drivers. NAV-TV ZEN-H A2B Interface One factory A2B interface that converts the compatible Harley radio signal into eight channels of 5-volt analog RCA output for aftermarket amplifier integration. 4-AWG Amplifier Power Kit Heavy-gauge power and ground wiring with the primary connections and protection hardware required for the amplifier installation. Half-Inch Speaker Spacers Speaker-spacing components provide additional mounting clearance for the DS18 hybrid speakers in the applicable front fairing locations. Road Glide or Street Glide Configuration The selected Shopify variant identifies which motorcycle and fairing configuration the system is being prepared for. Two-speaker system: Rear speakers, saddlebag speaker adapters, speaker lids, rear-speaker wiring, rear grilles and a rear mounting system are not included unless separately added to the order. Speaker Impedance and Amplifier Channel Configuration Front-Left Speaker One PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated ION1600.4D amplifier channel. Front-Right Speaker The second PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Two Available Channels Two amplifier channels remain available for a compatible future rear-speaker pair after the required mounting and wiring components are installed. Included Speaker Count Two speakers / one pair Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Amplifier Output at 4Ω 240W RMS per channel Front-Left Channel One PRO-HY6.4MSL speaker at 4Ω Front-Right Channel One PRO-HY6.4MSL speaker at 4Ω Loaded Amplifier Channels Two Available Amplifier Channels Two Bridging Required No Output must be limited correctly: The ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The ION1600.4D is a compact full-range Class-D amplifier that delivers substantial output from a motorcycle-friendly chassis. High-level and RCA inputs, variable crossovers, protection circuits and a clipping indicator support flexible system integration and measured setup. 240W × 4 at 4Ω Published four-channel output for compatible 4-ohm speaker systems. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm speaker systems. 800W × 2 Bridged Published bridged output into properly configured 4-ohm loads. Adjustable Crossovers Low-pass, high-pass and full-range modes support system-specific frequency control. Clip Indicator Power, protection and clipping indicators assist with safe amplifier setup. Compact Chassis The small amplifier footprint helps conserve installation space on a motorcycle. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 channels Output at 2Ω 400W RMS × 4 channels Bridged Output at 4Ω 800W RMS × 2 channels Frequency Response 10Hz–20kHz Signal-to-Noise Ratio Greater than 95dB Efficiency at 4Ω 88% Damping Factor 210 Total Harmonic Distortion 0.01% Input Range 0.2–6V Crossover Modes LPF / HPF / FULL Crossover Range 40Hz–2kHz Minimum Impedance 2Ω stereo / 4Ω bridged Power Input Terminal 4-AWG Published External Fuse 140A Cooling Fan Yes Dimensions 7.32 × 4.72 × 2 inches / 186 × 120 × 52mm Fuse and wiring verification: Confirm that the supplied 4-AWG power kit, fuse holder and installed fuse match the amplifier’s published current and protection requirements before operating the system. DS18 PRO-HY6.4MSL Hybrid Fairing Speakers Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange loudspeaker with a built-in 1-inch titanium compression driver. This two-way hybrid arrangement provides both midrange projection and high-frequency output from one speaker assembly. 150W RMS Each included speaker is rated for 150 watts RMS and 300 watts maximum. 4-Ohm Impedance Each speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Hybrid Two-Way Design A built-in titanium compression driver supplies high-frequency output without a separate tweeter location. Shallow Mounting Depth The 2.82-inch mounting depth supports tight motorcycle fairing installations. IP65 Rated Water-resistant construction and a protected grille support powersports use. 140Hz High-Pass Reference DS18 publishes 140Hz as the recommended high-pass crossover reference. Speaker Model DS18 PRO-HY6.4MSL Quantity Included Two speakers / one pair Nominal Size 6.5 inches / 165.1mm Nominal Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Sensitivity 93dB, 1W / 1m Frequency Response 100Hz–20kHz Recommended High-Pass Crossover 140Hz Speaker Design Two-way shallow hybrid loudspeaker Midrange Voice Coil 1.5 inches / 38.6mm Compression Driver 1-inch titanium diaphragm with neodymium magnet Cone Material Water-resistant treated paper Weather Rating IP65 Front Mount Cutout 5.6 inches / 142mm Mounting Depth 2.82 inches / 72mm Protective Grille Included with each speaker Check fairing clearance: Half-inch spacers are included, but additional pod modification, magnet-cap clearance work or other installation adjustments may still be required depending on the exact motorcycle and factory enclosure. NAV-TV ZEN-H Factory A2B Integration The NAV-TV ZEN-H converts the compatible factory Harley-Davidson A2B radio signal into eight channels of analog RCA output for the DS18 amplifier and future system expansion. Eight Analog Outputs Supplies eight channels of low-level analog RCA output at up to 5 volts RMS. Factory Control Retention Retains compatible factory volume, balance, fader and radio EQ functions. Direct A2B Integration Interfaces directly with the compatible factory A2B data and audio system. Designed for compatible late-model Harley A2B audio systems Eight-channel analog RCA output Up to 5-volt RMS output Factory volume retention Factory balance and fader retention Factory EQ preset retention where supported No replacement aftermarket radio required No built-in system DSP: This package uses the standard ZEN-H interface and the conventional DS18 ION1600.4D amplifier. Advanced equalization, time alignment and output limiting require a separately added compatible DSP. Power Wiring and Speaker Installation 4-AWG Amplifier Wiring The included power kit supplies the heavy-gauge power and ground foundation required for the ION1600.4D amplifier. Half-Inch Speaker Spacers The supplied spacers provide additional fairing clearance for the shallow hybrid speakers. Disconnect the motorcycle battery before installation. Mount the amplifier securely with adequate ventilation. Install appropriate fuse protection close to the battery. Protect wiring from steering movement, heat and sharp edges. Use clean and secure battery and chassis connections. Confirm speaker depth and spacer clearance before assembly. Verify speaker polarity before reinstalling the fairing. Inspect battery and charging-system condition before high-output use. Gain and Crossover Setup Proper setup is critical because the ION1600.4D can produce more continuous power at 4 ohms than each included PRO-HY6.4MSL is rated to handle. Connect one front speaker to each of two amplifier channels. Do not bridge the amplifier channels for the included speakers. Configure the active channels for high-pass operation. Use 140Hz as the manufacturer’s published high-pass reference. Adjust the final crossover for the fairing and desired output. Set gain using measured clean output rather than by ear. Do not use amplifier gain as a volume control. Monitor the clipping indicator during setup. Reduce output immediately if distortion or mechanical noise occurs. Professional setup recommended: Incorrect gain or crossover settings can damage the speakers even when the system appears to play normally at moderate volume. Future Rear-Speaker Expansion Two unused amplifier channels and additional NAV-TV RCA outputs provide a path for a future rear-speaker upgrade. Rear expansion must be designed around compatible speaker impedance, RMS power handling, mounting depth, wiring and crossover requirements. Already Available Two unused amplifier channels Additional NAV-TV RCA outputs Four-channel amplifier crossover controls 4-AWG amplifier power foundation Required for Expansion Compatible rear speakers Saddlebag lids, adapters or speaker pods Rear-speaker wiring and connectors Correct impedance and RMS-power matching Final crossover and gain setup Rear equipment is not included: This remains a two-speaker audio system until compatible rear speakers, mounting components and wiring are purchased and installed. Complete System Specifications System Type Two-speaker plug-and-play motorcycle audio system Motorcycle Options Road Glide or Street Glide Vehicle Application Compatible 2023.5 and newer Harley-Davidson A2B applications Amplifier DS18 ION1600.4D four-channel Class-D amplifier Amplifier Output at 4Ω 240W RMS × 4 channels Included Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Loaded Amplifier Channels Two channels at 4Ω each Available Amplifier Channels Two Factory Signal Interface NAV-TV ZEN-H A2B interface NAV-TV Output Eight-channel analog RCA at up to 5V RMS Power Wiring 4-AWG amplifier power installation kit Speaker Spacers Half-inch spacers included Built-In DSP No Rear Speakers Included No Shopify Option Choose Road Glide or Street Glide Current Listed Lead Time Approximately 5–10 business days Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, exact model, trim, Road Glide or Street Glide fairing, factory radio, factory amplifier, A2B configuration and current speaker setup before ordering. Select Road Glide or Street Glide before adding the kit to the cart. The package includes two front fairing speakers. Each included speaker has a nominal 4-ohm impedance. Two amplifier channels remain available for future expansion. The package uses NAV-TV factory A2B integration. The amplifier does not include built-in DSP. Half-inch speaker spacers are included. Additional fairing modification may still be required. Correct gain and high-pass crossover setup are required. Rear speakers and rear mounting components are not included. Professional installation and system setup are recommended. Best For Compatible 2023.5+ Harley-Davidson audio upgrades 2024+ Road Glide front-speaker upgrades 2024+ Street Glide front-speaker upgrades Factory Skyline radio and A2B audio integration High-output two-speaker fairing systems Riders planning to add saddlebag speakers later Professional motorcycle audio installations Related Motorcycle Audio Categories 2023.5+ Harley Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Motorcycle Amplifiers Signal and Amplifier Support Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries 2023.5+ Harley 2-Speaker Audio System FAQ How many speakers are included? The system includes two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers for the front fairing. What impedance are the included speakers? Each included speaker has a nominal impedance of 4 ohms. How much power can each speaker handle? Each PRO-HY6.4MSL is rated for 150 watts RMS and 300 watts maximum. How much power does the amplifier produce at 4 ohms? The ION1600.4D produces up to 240 watts RMS on each of its four channels at 4 ohms. Is the amplifier too powerful for the speakers? The amplifier can produce more continuous power than each speaker is rated to handle. It can be used safely when gain, high-pass crossover and maximum clean output are configured correctly. Are all four amplifier channels used? No. Two channels power the supplied speakers. Two channels remain available for a compatible future rear-speaker pair. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley A2B signal into analog RCA outputs that can be connected to the aftermarket amplifier. Does the NAV-TV interface retain factory controls? It retains compatible factory volume, balance, fader and supported EQ functions while integrating the aftermarket amplifier. Does this package include DSP? No. The standard ZEN-H interface and ION1600.4D amplifier do not provide advanced system DSP. A compatible external processor can be added when equalization, time alignment or output limiting is needed. Are the speakers weather resistant? Yes. The speakers are IP65 rated and use water-resistant cones and protective grille cloth. They should not be described as submersible. Can rear speakers be added later? Yes. The two unused amplifier channels can power a properly matched rear-speaker pair after the required speakers, wiring, mounting hardware and system setup are added. Are speaker spacers included? Yes. The package includes half-inch spacers to provide additional fairing speaker clearance. Will the speakers fit without modification? Fitment depends on the motorcycle and factory speaker enclosure. Additional spacing, pod modification or clearance work may still be required. Are saddlebag speakers included? No. This is a two-speaker system. Rear speakers, saddlebag mounting parts and rear-speaker wiring must be purchased separately. How long does the kit take to fulfill? The current listed lead time is approximately 5–10 business days, subject to component availability and motorcycle configuration. Need Help Matching This 2023.5+ Harley Audio System? Garage Bagger Stereo can help verify Road Glide or Street Glide fitment, speaker impedance selection, amplifier matching, speaker and amplifier mounting, power and speaker wiring, and factory A2B signal integration before installation. Installation Services Request a Custom Build -
2023.5+ Harley-Davidson 4-Speaker Plug-and-Play Audio System | DS18 / Cerwin-Vega
Vendor:DS18 Motorcycle Audio2023.5+ HARLEY FOUR-SPEAKER AUDIO SYSTEM 2023.5+ Harley-Davidson 4-Speaker Plug-and-Play Audio System Upgrade a compatible late-model Harley-Davidson Road Glide or Street Glide with a complete front-and-rear audio package built around a DS18 four-channel amplifier, DS18 hybrid fairing speakers, Cerwin-Vega 6×9 saddlebag speakers and NAV-TV factory A2B integration. The system includes the primary signal integration, power wiring, rear-speaker wiring, front-speaker spacing and saddlebag lid conversion components needed to create a matched four-speaker motorcycle audio system. See Everything Included View Speaker Configuration Complete Front and Rear System Compatible Road Glide and Street Glide applications DS18 ION1600.4D four-channel Class-D amplifier Two DS18 PRO-HY6.4MSL 6.5-inch front speakers Two Cerwin-Vega ST692CX2 6×9 rear speakers Four dedicated amplifier channels NAV-TV ZEN-H factory A2B integration Cerwin-Vega saddlebag lid cut-in kit Cicada Audio 24HDRO rear-output harness 4-AWG amplifier power wiring Half-inch front-speaker spacers Typical listed lead time of 5–10 business days Complete 4-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package creates a complete front-and-rear audio system for compatible 2023.5 and newer Harley-Davidson Touring motorcycles. Two DS18 hybrid speakers upgrade the front fairing, while two Cerwin-Vega Stroker 6×9 speakers add high-output rear audio through the factory saddlebag lids. The DS18 ION1600.4D supplies one dedicated amplifier channel to each speaker. The front speakers operate at a nominal 4-ohm load, and the rear speakers operate at a nominal 2-ohm load. The NAV-TV ZEN-H converts the compatible factory A2B audio signal into analog RCA outputs for the aftermarket amplifier. The Cicada Audio 24HDRO harness routes the rear amplifier output toward the saddlebags using factory-style connections. Plug-and-play does not mean cutting-free: The factory A2B signal interface and rear-output wiring use plug-and-play connections. Both compatible factory saddlebag lids must still be permanently cut to install the included Cerwin-Vega 6×9 speaker system. Road Glide and Street Glide Fitment Road Glide Applications Designed for compatible late-model Road Glide motorcycles equipped with the supported factory Harley-Davidson A2B audio platform. Road Glide sharknose fairing Two front 6.5-inch speaker locations Factory A2B radio integration Factory-style rear speaker output routing Street Glide Applications Designed for compatible late-model Street Glide motorcycles equipped with the supported factory Harley-Davidson A2B audio platform. Street Glide batwing fairing Two front 6.5-inch speaker locations Factory A2B radio integration Factory-style rear speaker output routing Verify the exact motorcycle: Confirm the year, model, trim, factory radio, factory amplifier, A2B configuration, saddlebag type, electrical locks and existing audio modifications before ordering. The 2023.5 designation primarily applies to the late-production CVO platform, while standard Road Glide and Street Glide applications begin with the redesigned 2024 platform. Everything Included in the Audio System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms and 400 watts RMS × 4 at 2 ohms. Two DS18 PRO-HY6.4MSL Speakers Two 6.5-inch, 4-ohm shallow hybrid fairing speakers with built-in titanium compression drivers and 150-watt RMS power handling. NAV-TV ZEN-H A2B Interface Factory A2B interface providing eight channels of analog RCA output for aftermarket amplifier integration. 4-AWG Amplifier Power Kit Heavy-gauge power and ground wiring with the primary terminals, fuse protection and installation hardware required for the amplifier. Half-Inch Front-Speaker Spacers Spacing components provide additional clearance for the DS18 hybrid speakers inside compatible factory fairing enclosures. Cerwin-Vega 6×9 Cut-In Lid Kit Saddlebag lid conversion system with adapters, protective grilles, cutting templates, plug-and-play wiring and required installation hardware. Two Cerwin-Vega ST692CX2 Speakers Two 2-ohm Stroker 6×9 two-way coaxial speakers with titanium-dome tweeters and 125-watt RMS power handling. Cicada Audio 24HDRO Harness Plug-and-play rear-output speaker harness with factory-style connectors, extensions and braided protective sheathing. Confirm current package contents: Review the active Shopify bundle and fulfillment notes before releasing the order if any amplifier wiring, spacers, brackets or lid-kit hardware have been substituted. Speaker Impedance and Amplifier Channel Configuration Front Fairing Channels Each DS18 PRO-HY6.4MSL front speaker presents a nominal 4-ohm load to its assigned amplifier channel. Rear Saddlebag Channels Each Cerwin-Vega ST692CX2 rear speaker presents a nominal 2-ohm load to its assigned amplifier channel. Channel 1 Front-left PRO-HY6.4MSL — 4Ω Channel 2 Front-right PRO-HY6.4MSL — 4Ω Channel 3 Rear-left ST692CX2 — 2Ω Channel 4 Rear-right ST692CX2 — 2Ω Amplifier Output at 4Ω 240W RMS per channel Amplifier Output at 2Ω 400W RMS per channel Front Speaker Rating 150W RMS per speaker Rear Speaker Rating 125W RMS per speaker Unused Amplifier Channels None Channel output must be limited carefully: The amplifier can produce substantially more continuous power than either included speaker model is rated to handle. Configure the front and rear channel pairs independently and set gain with measured clean output. DS18 ION1600.4D Four-Channel Amplifier The ION1600.4D is a compact full-range Class-D amplifier with selectable high-pass, low-pass and full-range operation. It includes low-level and high-level inputs, power and protection indicators, a clipping indicator and multiple electrical protection circuits. 240W × 4 at 4Ω Published output for the included 4-ohm front speaker channels. 400W × 4 at 2Ω Published output capability for the included 2-ohm rear channels. 800W × 2 Bridged Published bridged output into compatible 4-ohm loads. Adjustable Filtering Selectable LPF, HPF and full-range modes with variable crossover control. Clip Indicator Visual clipping indication assists with measured gain configuration. Compact Chassis Small dimensions support installation in space-conscious motorcycle builds. Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 Output at 2Ω 400W RMS × 4 Bridged Output at 4Ω 800W RMS × 2 Frequency Response 10Hz–20kHz Signal-to-Noise Ratio Greater than 95dB Efficiency at 4Ω 88% Damping Factor 210 Total Harmonic Distortion 0.01% Input Range 0.2–6V Crossover Modes LPF / HPF / FULL Crossover Range 40Hz–2kHz Minimum Impedance 2Ω stereo / 4Ω bridged Power Input 4-AWG Published External Fuse 140A Cooling Fan Yes Dimensions 7.32 × 4.72 × 2 inches / 186 × 120 × 52mm Power-kit verification: Confirm that the supplied cable, fuse holder and final fuse value meet the ION1600.4D requirements before operating the system. DS18 PRO-HY6.4MSL Front Fairing Speakers Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange loudspeaker with a built-in 1-inch titanium compression driver. This hybrid design provides midrange projection and high-frequency output from a single fairing speaker location. Speaker Model DS18 PRO-HY6.4MSL Quantity Two speakers / one pair Nominal Size 6.5 inches / 165.1mm Nominal Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Sensitivity 93dB, 1W / 1m Frequency Response 100Hz–20kHz Recommended High-Pass Crossover 140Hz Compression Driver 1-inch titanium diaphragm with neodymium magnet Cone Water-resistant treated paper Weather Rating IP65 Mounting Cutout 5.6 inches / 142mm Mounting Depth 2.82 inches / 72mm Check fairing clearance: Half-inch spacers are included, but pod modification, magnet-cap clearance work or additional spacing may still be required depending on the exact motorcycle and enclosure. Cerwin-Vega ST692CX2 Rear Saddlebag Speakers The rear system uses two Cerwin-Vega Stroker 6×9 two-way coaxial speakers. Each driver combines a polypropylene woofer cone with a titanium-dome tweeter and an internal crossover. Speaker Model Cerwin-Vega ST692CX2 Quantity Two speakers / one pair Speaker Size 6×9 inches Speaker Design Two-way coaxial speaker with titanium-dome tweeter Nominal Impedance 2Ω per speaker Power Handling 125W RMS / 250W maximum per speaker Sensitivity 90.5dB, 1W / 1m Frequency Response 45Hz–20kHz Woofer Cone Polypropylene Tweeter Diaphragm Titanium Internal Crossover Included Water Resistance IPX5 Mounting Depth 4.25 inches / 107.9mm Rear-channel output warning: The amplifier can produce up to 400 watts RMS per channel at 2 ohms, while each rear speaker is rated for 125 watts RMS. Rear gain and output voltage must be limited correctly. NAV-TV ZEN-H Factory A2B Integration The NAV-TV ZEN-H allows the factory Harley-Davidson head unit to feed aftermarket amplifiers through low-level analog RCA outputs while retaining supported factory controls. Eight RCA Outputs Provides eight channels of low-level analog audio output. Up to 5V RMS Supplies a strong low-level signal for compatible amplifiers. Factory Control Retention Retains supported volume, fader, balance, chimes and EQ presets. No system DSP is included: The standard ZEN-H and ION1600.4D do not provide advanced equalization, time alignment or output limiting. A compatible external DSP can be added when those functions are required. Cerwin-Vega Saddlebag Lid Conversion The cut-in lid system converts compatible factory saddlebag lids into 6×9 rear-speaker locations without requiring replacement painted lids. Cutting Templates Left and right templates support more accurate lid modification. Speaker Adapters Adapters secure the Cerwin-Vega 6×9 speakers to the modified lids. Protective Grilles Included grilles protect the speakers and complete the visible installation. Remove and inspect both saddlebag lids before cutting. Confirm the left and right template orientation. Check speaker depth and electrical-lock clearance. Confirm hinge, tether and weather-seal clearance. Route the 24HDRO wiring before final lid assembly. Protect and seal all cut edges after modification. Verify speaker polarity before reinstalling the lids. Permanent cutting required: Cutting both factory saddlebag lids is irreversible. Professional installation is recommended when the installer is not experienced with late-model Harley-Davidson lid conversions. Cicada Audio 24HDRO Rear-Speaker Harness The 24HDRO routes aftermarket rear-speaker output into compatible late-model Harley-Davidson saddlebags with factory-style connections. Compatible with supported 2024 and newer Harley-Davidson models Main harness with factory-style connectors Two short extensions and two longer speaker leads Color-coded wiring for easier identification Braided black protective sheathing No cutting or splicing of the compatible factory rear-output harness Gain, Crossover and Speaker Protection The amplifier has considerably more available power than the included front and rear speakers require. Proper setup is mandatory. Connect one speaker to each amplifier channel. Do not bridge any channels for the supplied four-speaker layout. Configure the front channels for high-pass operation. Use 140Hz as the published front-speaker high-pass reference. Configure an appropriate high-pass crossover for the rear 6×9 speakers. Set the front and rear gain controls independently. Use measured clean output voltage rather than setting gain by ear. Do not use amplifier gain as a volume control. Monitor the clipping indicator during setup. Reduce output immediately if distortion or mechanical noise occurs. Professional setup strongly recommended: Incorrect gain or crossover settings can damage the speakers quickly because of the amplifier’s available output. Complete System Specifications System Type Four-speaker front-and-rear plug-and-play audio system Vehicle Application Compatible 2023.5+ Harley-Davidson Road Glide and Street Glide Amplifier DS18 ION1600.4D four-channel Class-D amplifier Front Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Front Impedance 4Ω per speaker Rear Speakers Two Cerwin-Vega ST692CX2 6×9 coaxial speakers Rear Impedance 2Ω per speaker Loaded Amplifier Channels All four channels Factory Signal Interface NAV-TV ZEN-H A2B interface Rear Speaker Wiring Cicada Audio 24HDRO plug-and-play harness Power Wiring 4-AWG amplifier power installation kit Front Speaker Spacers Half-inch spacers included Rear Mounting System Cerwin-Vega 6×9 saddlebag lid cut-in kit Built-In DSP No Saddlebag Cutting Required Yes Typical Listed Lead Time Approximately 5–10 business days Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, exact model, trim, factory radio, factory amplifier, A2B configuration, saddlebag type and current audio modifications. The system includes two front and two rear speakers. The front speakers are 4 ohms each. The rear speakers are 2 ohms each. All four amplifier channels are used. The factory signal interface is plug-and-play on compatible applications. The rear-output harness is plug-and-play on compatible applications. Both factory saddlebag lids require permanent cutting. Half-inch front-speaker spacers are included. Additional fairing clearance work may still be required. The system does not include built-in DSP. Correct front and rear gain settings are mandatory. Professional installation and setup are strongly recommended. Best For Compatible 2023.5+ Harley-Davidson complete audio upgrades 2024+ Road Glide front-and-rear speaker systems 2024+ Street Glide front-and-rear speaker systems Factory Skyline radio and A2B integration Four-channel amplified motorcycle audio systems Factory saddlebag lid conversions Professional Harley-Davidson audio installations Related Motorcycle Audio Categories 2023.5+ Harley Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Motorcycle Amplifiers Amplifier and Signal Support Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries 2023.5+ Harley 4-Speaker Audio System FAQ How many speakers are included? Four speakers are included: two DS18 6.5-inch hybrid fairing speakers and two Cerwin-Vega 6×9 saddlebag speakers. What impedance are the front speakers? Each DS18 front speaker has a nominal impedance of 4 ohms. What impedance are the rear speakers? Each Cerwin-Vega rear speaker has a nominal impedance of 2 ohms. Are all four amplifier channels used? Yes. Two channels power the front speakers and two channels power the rear speakers. How much power does the amplifier produce? The ION1600.4D produces 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms or 800 watts RMS × 2 bridged at 4 ohms. Why is careful gain setup required? The amplifier can produce more continuous power than the included speakers are rated to handle. Front and rear gain settings must be configured independently and limited to safe clean output. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley-Davidson A2B signal into analog RCA outputs for the aftermarket amplifier. Does the package include DSP? No. The standard ZEN-H and ION1600.4D do not provide advanced digital signal processing. Does the factory signal wiring need to be cut? The compatible NAV-TV A2B connection does not require cutting the primary factory signal wiring. Is rear-speaker wiring included? Yes. The system includes the Cicada Audio 24HDRO plug-and-play rear-output speaker harness. Do the saddlebag lids need to be cut? Yes. Both compatible factory saddlebag lids must be permanently cut for the Cerwin-Vega 6×9 installation. Are front-speaker spacers included? Yes. Half-inch front-speaker spacers are included. Are the speakers weather resistant? The DS18 front speakers are IP65 rated, and the Cerwin-Vega rear speakers are rated IPX5. Neither should be described as submersible. How long does the kit take to fulfill? The current listed lead time is approximately 5–10 business days, subject to component availability and motorcycle configuration. Need Help Matching This 4-Speaker Harley Audio System? Garage Bagger Stereo can help verify motorcycle fitment, front and rear speaker impedance selection, amplifier matching, fairing and saddlebag mounting, power and speaker wiring, and factory A2B signal integration before installation. Installation Services Request a Custom Build -
DS18 I48DSP 4-In/8-Out DSP w/ Bluetooth App Control
Vendor:DS18 Motorcycle AudioDS18 i48DSP — DSP Control for Clean, Repeatable Harley Tuning i48DSP is built for riders who want control the stock radio can’t provide: correct crossover management, stable EQ shaping, and tuning results that stay consistent at highway speed. Shop Plug-and-Play DSPs Amplifier Installation Parts Start a Build Consultation THE REFERENCE STANDARD Fitment First. Then Performance. We confirm your channel plan and integration so it installs clean and tunes correctly. What This DSP Does Adds proper crossover points and EQ control so your speakers work together. The result is cleaner staging, stronger midbass authority, and repeatable tuning outcomes. Best Use-Case on Harley Builds Systems where “loud but messy” needs to become loud and controlled Multi-speaker builds that require correct crossover and alignment Riders who want clean installs and serviceable wiring paths Need Help Deciding? Speak now to one of our sales consultants or support team. Call: 864-334-6131 -
DS18 ION1600.4D Four Channel Amplifier
Vendor:DS18 Motorcycle AudioDS18 ION1600.4 Compact Full-Range Class D 4-Channel Amplifier 4 x 240 Watts RMS @ 4-ohm ION 1600.4D RMS Power @ 4Ω 4x240W RMS Power @ 2Ω 4x400W RMS Power @ 4Ω Bridge 2x800W Product Dimensions: 7.32 x 4.72 x 2.0 in Hi-Level Inputs Tiffany RCA Terminal LED Clip Indicator High Efficiency Micro Digital Design Power Input Terminal Size 4 AWG Fuse Size 140A Selectable X-Over LPF/HPF/Full Efficiency at 4Ω 88% 2 Year Warranty 4 AWG Power Kit Register your product Introducing DS18’s ION1600.4D, the perfect digital micro amplifier addition to your car audio system for boosting performance ensuring a premium listening experience! Hi-level Inputs and Tiffany RCA’s allow this amplifier to be easily integrated into any existing audio setup and ensure optimal signal transfer for crystal clear sound. The ION1600.4D’s miniature size and surface mount component technology allows it to be placed almost anywhere in your build without taking up too much space. The full variable crossover switch lets you customize your audio settings to your preferences for enhanced audio clarity across all frequencies. Surface mount component technology makes this amplifier highly resistant to vibrations, ensuring stable performance even on rough terrain. Additionally, protective coating prevents moisture corrosion on the PCB, guaranteeing longevity and durability. Safety was a top priority in the creation of DS18’s ION1600.4D amplifier. The power, protection, and clipping LED indicator always keeps you informed of the amplifiers status. While short circuit thermal, DC offset, and high/low voltage protection features, give you the comfort of knowing that your amplifier will operate reliably and safely. The ION1600.4D has power ratings of 2 X 800W at 4-ohm bridged, 4 x 400W at 2 ohms, and 4 x 240W at 4 ohms; perfect power ratings to turbocharge every component in your system! Experience the power and precision of DS18’s ION1600.4D! -
DS18 PRO-HY6 MSL 6.5" — Hybrid Slim Loudspeaker (Single)
Vendor:DS18 Motorcycle AudioDS18 PRO-HY6MSL 6.5″ Hybrid Slim Loudspeaker w/ Built-in Compression Driver (2Ω/4Ω/8Ω) (Sold in singles) Engineered for tight fairings and small lids, the 6.5″ PRO-HY6MSL blends a shallow mid-range with an integrated 1″ compression driver for loud, clear vocals in compact spaces. Water-resistant construction and a slim basket make it a go-to for motorcycle and powersports builds. Key Specifications: Power Handling (RMS / Max): 150 W / 300 W Impedance Options: 2Ω / 4Ω / 8Ω Configuration: Hybrid slim mid-range + built-in 1″ compression driver Form Factor: Shallow-mount for tight fairings/lids Cone/Surround: Water-resistant materials (bike-ready) Recommended High-Pass: ≥120 Hz Mounting Depth: 2.82” Frequency Response: 100Hz-20Khz Free Air Resonance (Fs): 160Hz -
DS18 ION700.2D Two Channel Amplifier
Vendor:DS18 Motorcycle AudioDS18 ION700.2D Compact Full Range 2 Channel Amplifier 2 x 350W RMS @ 2-Ohm ION700.2D 2 Channel Full Range Class D 2 - 4 Ohm Stable 2 X 240 Watts @ 4 Ohm Power / Clip / Protection Indicator Compact 2 x 350W RMS TECHNICAL DATA SPECS SKU - ION700.2DTotal Watts (Peak) - 2100WRMS Power @ 4 ohm - 2 x 240WRMS Power @ 2 ohm - 2 x 350WRMS Power @ 1 ohm - N/ARMS Power @ 4 ohm Bridge - 700W AUDIO Frequency Response - 10Hz-20KHzSignal-to-Noise Ratio - >95dBEfficiency @ 4 ohm - 88%Damping Factor - 210Input Impedance - 27KohmsChannel Separation - 59dBTotal Harmonic Distortion (THD) - 0.01%Low-Level Input Range - 0.2-6VHigh-Level Input -YesSelectable X-Over - LPF/HPF/FULLX-Over Filter Range - 40Hz-2KHzBass Boost Range - 0~12dBBass Boost Frequency - 45Hz FEATURES Amplifier Class - DigitalAmplifier Type - Full-Range StereoNumber of Channels - 2Minimum Impedance - 2 Ohm (St) / 4 Ohms (Bridge)Led Indicator - Power / Protect / ClippingPower Input Terminal Size - 4 AWGFuse Size - 60A (external)Remote Level Control - YesCooling Fan - NoThermal Protection - YesOver-Load Protection - YesDC Output Protection - YesShort Circuit Output Protection - YesVoltage Input Protection - YesClipping Protection - YesBody Color / Finish - Aluminum Black / Silver EXTRA FEATURES Hi-Level Speaker connector - YesTiffany RCA Terminal - YesLED Clip Indicator - YesHigh-Efficiency Micro Digital Design - Yes MEASUREMENT Overall Length - 6.14" / 156mmOverall Wide - 4.72" / 120mmOverall Height - 2" / 52mmHeatsink Length - 4.84" / 123mmGross Single Unit Weight - 1.65 lbs / 0.75 kg Introducing DS18’s ION700.2D, the perfect digital micro amplifier addition to your audio system for boosting performance and efficiency for a premium listening experience! Hi-level Inputs and Tiffany RCA’s allow this amplifier to be easily integrated into any existing audio setup and ensure optimal signal transfer for crystal clear sound. The ION700.2D miniature size and surface mount component technology allow it to be placed almost anywhere in your build without taking up too much space. The full variable crossover switch lets you customize your audio settings to your preferences for enhanced audio clarity across all frequencies. You also can adjust the amplifier's 45Hz Bass Boost level up to 12dB. Fine-tune these levels with the convenient remote level knob control! Safety was a top priority in the creation of DS18’s ION700.2D amplifier. The power, protection, and clipping LED indicator always keep you informed of the amplifier's status. While short circuit thermal, DC offset, and high/low voltage protection features, give you the comfort of knowing that your amplifier will operate reliably and safely. Additionally, protective coating prevents moisture corrosion on the PCB, guaranteeing longevity and durability. The ION700.2D has power ratings of 700W at 4-ohm bridged, 2 x 350W at 2 ohms, and 2 x 240W at 4 ohms; perfect power ratings to turbocharge every component in your system! Experience the power and precision of DS18’s ION700.2D! TECHNICAL DATA SPECS SKU - ION700.2DTotal Watts (Peak) - 2100WRMS Power @ 4 ohm - 2 x 240WRMS Power @ 2 ohm - 2 x 350WRMS Power @ 1 ohm - N/ARMS Power @ 4 ohm Bridge - 700W AUDIO Frequency Response - 10Hz-20KHzSignal-to-Noise Ratio - >95dBEfficiency @ 4 ohm - 88%Damping Factor - 210Input Impedance - 27KohmsChannel Separation - 59dBTotal Harmonic Distortion (THD) - 0.01%Low-Level Input Range - 0.2-6VHigh-Level Input -YesSelectable X-Over - LPF/HPF/FULLX-Over Filter Range - 40Hz-2KHzBass Boost Range - 0~12dBBass Boost Frequency - 45Hz FEATURES Amplifier Class - DigitalAmplifier Type - Full-Range StereoNumber of Channels - 2Minimum Impedance - 2 Ohm (St) / 4 Ohms (Bridge)Led Indicator - Power / Protect / ClippingPower Input Terminal Size - 4 AWGFuse Size - 60A (external)Remote Level Control - YesCooling Fan - NoThermal Protection - YesOver-Load Protection - YesDC Output Protection - YesShort Circuit Output Protection - YesVoltage Input Protection - YesClipping Protection - YesBody Color / Finish - Aluminum Black / Silver EXTRA FEATURES Hi-Level Speaker connector - YesTiffany RCA Terminal - YesLED Clip Indicator - YesHigh-Efficiency Micro Digital Design - Yes MEASUREMENT Overall Length - 6.14" / 156mmOverall Wide - 4.72" / 120mmOverall Height - 2" / 52mmHeatsink Length - 4.84" / 123mmGross Single Unit Weight - 1.65 lbs / 0.75 kg -
DS18 ION1000.4D Four Channel Amplifier
Vendor:DS18 Motorcycle AudioDS18 ION1000.4 Compact Full-Range Class D 4-Channel Amplifier 4 x 150 Watts RMS @ 4-ohm ION 1000.4D RMS Power @ 4Ω 4x150W RMS Power @ 2Ω 4x250W RMS Power @ 4Ω Bridge 2x500W Product Dimensions: 6.14 x 4.72 x 2.0 in Hi-Level Inputs Tiffany RCA Terminal LED Clip Indicator High Efficiency Micro Digital Design Power Input Terminal Size 4 AWG Fuse Size 80A Selectable X-Over LPF/HPF/Full Efficiency at 4Ω 88% 2 Year Warranty 4 AWG Power Kit Register your product Introducing DS18’s ION1000.4D, the perfect digital micro amplifier addition to your car audio system for boosting performance ensuring a premium listening experience! Hi-level Inputs and Tiffany RCA’s allow this amplifier to be easily integrated into any existing audio setup and ensure optimal signal transfer for crystal clear sound. The ION1000.4D’s miniature size and surface mount component technology allows it to be placed almost anywhere in your build without taking up too much space. The full variable crossover switch lets you customize your audio settings to your preferences for enhanced audio clarity across all frequencies. Fine tune these levels with the convenient remote level knob control! Surface mount component technology makes this amplifier highly resistant to vibrations, ensuring stable performance even on rough terrain. Additionally, protective coating prevents moisture corrosion on the PCB, guaranteeing longevity and durability. Safety was a top priority in the creation of DS18’s ION1000.4D amplifier. The power, protection, and clipping LED indicator always keeps you informed of the amplifiers status. While short circuit thermal, DC offset, and high/low voltage protection features, give you the comfort of knowing that your amplifier will operate reliably and safely. The ION1000.4D has power ratings of 2 X 500W at 4-ohm bridged, 2 x 250W at 2 ohms, and 4 x 150W at 4 ohms; perfect power ratings to turbocharge every component in your system! Experience the power and precision of DS18’s ION1000.4D! -
DS18 ION1200.1D Subwoofer Amplifier
Vendor:DS18 Motorcycle AudioDS18 ION1200.1D Compact Full Range 1 Channel Amplifier 1200 Watts RMS @ 1-Ohm ION1200.1D 1 Channel Full Range Class D 1 - 4 Ohm Stable 1 X 1200 Watts @ 1 Ohm Power / Clip / Protection Indicator Compact Power Rating: 1200W RMS TECHNICAL DATA SKU - ION1200.1DTotal Watts (Peak) - 3600WRMS Power @ 4 ohm - 400WRMS Power @ 2 ohm - 800WRMS Power @ 1 ohm - 1200WRMS Power @ 4 ohm Bridge - N/A AUDIO Frequency Response - 10Hz-20KHzSignal-to-Noise Ratio - >95dBEfficiency @ 4 ohm - 88%Damping Factor - 210Input Impedance - 27KohmsChannel Separation - N/ATotal Harmonic Distortion (THD) - 0.01%Low-Level Input Range - 0.2-6VHigh-Level Input - YesSelectable X-Over - Band-PassX-Over Filter Range - HP: 15Hz-1KHz / LP: 40Hz-20KHzBass Boost Range - 0~12dBBass Boost Frequency - 45Hz FEATURES Amplifier Class - DigitalAmplifier Type - Full-Range MonoblockNumber of Channels - 1Minimum Impedance - 1 OhmLed Indicator - Power / Protect / ClippingPower Input Terminal Size - 4 AWGFuse Size - 100A (external)Remote Level Control - YesCooling Fan - NoThermal Protection - Yes (90?C)Over-Load Protection - YesDC Output Protection - YesShort Circuit Output Protection - YesVoltage Input Protection - YesClipping Protection - YesBody Color / Finish - Aluminum Black / Silver EXTRA FEATURES Hi-Level Speaker connector - YesTiffany RCA Terminal - YesLED Clip Indicator - YesHigh-Efficiency Micro Digital Design - Yes MEASUREMENT Overall Length - 6.92" / 176mmOverall Wide - 4.72" / 120mmOverall Height - 2" / 52mmHeatsink Length - 5.62" / 143mmGross Single Unit Weight - 2.2 lbs / 1 kg Experience an unparalleled sound journey with DS18's ION1200.1D, a full-range high-efficiency micro digital 1-channel amplifier designed for powerful and crisp audio performance that will elevate your listening experience to new heights. Built for seamless integration into your audio system, DS18's ION1200.1D allows for easy connectivity and optimal signal transfer using Hi-Level Inputs and Tiffany RCAs. Its miniature size and surface-mount component technology allow you to place the ION1200.1D almost anywhere in your build. With a frequency response of 10Hz – 20KHz this full-range amplifier comes with variable full-range crossover filters for precise control over your sound. This gives the ION1200.1D the ability to be configured for bass or mids/highs, depending on how you set the full-range crossover. Fine-tune these levels with the convenient remote level control knob! The ION1200.1D is engineered to withstand the test of time. Protective coating on the PCB prevents moisture corrosion, while bonded components provide extra vibration protection. Safety was a top priority in the construction of DS18's ION1200.1D amplifier. The power, protection, and clipping LED indicators always keep you informed of the amplifier's status. Short circuit thermal, DC offset, and high/low voltage protection features give you the comfort of knowing that your amplifier will operate reliably and safely. The ION1200.1D has power ratings of 1200W at 1 ohm, 800W at 2 ohms, and 400W at 4 ohms; perfect power ratings to turbocharge every piece of equipment in your system! Immerse yourself in a world of superior sound quality and reliability with DS18's DS18's0.1D! TECHNICAL DATA SKU - ION1200.1DTotal Watts (Peak) - 3600WRMS Power @ 4 ohm - 400WRMS Power @ 2 ohm - 800WRMS Power @ 1 ohm - 1200WRMS Power @ 4 ohm Bridge - N/A AUDIO Frequency Response - 10Hz-20KHzSignal-to-Noise Ratio - >95dBEfficiency @ 4 ohm - 88%Damping Factor - 210Input Impedance - 27KohmsChannel Separation - N/ATotal Harmonic Distortion (THD) - 0.01%Low-Level Input Range - 0.2-6VHigh-Level Input - YesSelectable X-Over - Band-PassX-Over Filter Range - HP: 15Hz-1KHz / LP: 40Hz-20KHzBass Boost Range - 0~12dBBass Boost Frequency - 45Hz FEATURES Amplifier Class - DigitalAmplifier Type - Full-Range MonoblockNumber of Channels - 1Minimum Impedance - 1 OhmLed Indicator - Power / Protect / ClippingPower Input Terminal Size - 4 AWGFuse Size - 100A (external)Remote Level Control - YesCooling Fan - NoThermal Protection - Yes (90?C)Over-Load Protection - YesDC Output Protection - YesShort Circuit Output Protection - YesVoltage Input Protection - YesClipping Protection - YesBody Color / Finish - Aluminum Black / Silver EXTRA FEATURES Hi-Level Speaker connector - YesTiffany RCA Terminal - YesLED Clip Indicator - YesHigh-Efficiency Micro Digital Design - Yes MEASUREMENT Overall Length - 6.92" / 176 "mOverall Wide - 4.72" / 120" mOverall Height - 2" / 52m"Heatsink Length - 5.62" / 143 "mGross Single Unit Weight - 2.2 lbs / 1 kg -
DS18 ION600.1D Subwoofer Amplifier
Vendor:DS18 Motorcycle AudioDS18 ION600.1D Compact Full Range 1 Channel Amplifier 600 Watts RMS @ 1-Ohm ION600.1D 1 Channel Full Range Class D 1 - 4 Ohm Stable 1 X 600 Watts @ 1 Ohm Power / Clip / Protection Indicator Compact Power Rating: 600W RMS TECHNICAL DATA SPECS SKU - ION600.1DTotal Watts (Peak) - 1800WRMS Power @ 4 ohm - 200WRMS Power @ 2 ohm - 400WRMS Power @ 1 ohm - 600WRMS Power @ 4 ohm Bridge - N/A AUDIO Frequency Response - 10Hz-20KHzSignal to Noise Ratio - >95dBEfficiency @ 4 ohm - 88%Damping Factor - 210Input Impedance - 27KohmsChannel Separation - N/ATotal Harmonic Distortion (THD) - 0.01%Low-Level Input Range - 0.2-6VHigh-Level Input - YesSelectable X-Over - Band-PassX-Over Filter Range - HP: 15Hz-1KHz / LP: 40Hz-20KHzBass Boost Range - 0~12dBBass Boost Frequency - 45Hz FEATURES Amplifier Class - DigitalAmplifier Type - Full-Range MonoblockNumber of Channels - 1Minimum Impedance - 1 OhmLed Indicator - Power / Protect / ClippingPower Input Terminal Size - 4 AWGFuse Size - 80A (external)Remote Level Control - YesCooling Fan - NoThermal Protection - YesOver-Load Protection. - YesDC Output Protection. -YesShort Circuit Output Protection. - YesVoltage Input Protection - YesClipping Protection - YesBody Color / Finish - Aluminum Black / Silver EXTRA FEATURES Hi-Level Speaker connector - YesTiffany RCA Terminal - YesLED Clip Indicator - YesHigh-Efficiency Micro Digital Design - Yes MEASUREMENT Overall Length - 6.14" / 156mmOverall Wide - 4.72" / 120mmOverall Height - 2" / 52mmHeatsink Length - 4.84" / 123mmGross Single Unit Weight - 1.54 lbs / 0.7Kg Experience an unparalleled sound journey with DS18’s ION600.1D, a full-range high-efficiency micro digital 1-channel amplifier designed for powerful and crisp audio performance that will elevate your listening experience to new heights. Built for seamless integration into your audio system, DS18’s ION600.1D allows for easy connectivity and optimal signal transfer using Hi-Level Inputs and Tiffany RCAs. With a frequency response of 10Hz – 20KHz this full-range amplifier comes with variable full-range crossover filters for precise control over your sound. This gives the ION600.1D the ability to be configured for bass or mids/highs, depending on how you set the full-range crossover. Fine-tune these levels with the convenient remote level control knob! The ION600.1D is engineered to withstand the test of time. Protective coating on the PCB prevents moisture corrosion, while bonded components provide extra vibration protection. Safety was a top priority in the construction of DS18’s ION600.1D amplifier. The power, protection, and clipping LED indicators always keep you informed of the amplifier’s status. Short circuit thermal, DC offset, and high/low voltage protection features give you the comfort of knowing that your amplifier will operate reliably and safely. The ION600.1D has power ratings of 600W at 1 ohm, 400W at 2 ohms, and 200W at 4 ohms; perfect power ratings to turbocharge every piece of equipment in your system! Immerse yourself in a world of superior sound quality and reliability with DS18’s ION600.1D!
-
Sale
1998-2013 Harley Davidson Plug and Play Audio System (DS18)
Vendor:DS18 Motorcycle Audio1998-2013 HARLEY PLUG AND PLAY AUDIO 1998-2013 Harley-Davidson Plug and Play Audio System | DS18 This plug and play audio system is built for 1998-2013 Harley-Davidson Road Glide and Street Glide models using a DS18 ION1600.4D four-channel amplifier, two DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers, a bike-specific amplifier rack, and radio-specific plug and play wiring. Check Fitment What’s Included DS18 Power for 1998-2013 Harley Touring Road Glide and Street Glide options Plug and play for stock Harley radio Plug and play for aftermarket radio DS18 ION1600.4D four-channel amplifier DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers Bike-specific amp rack and radio-specific wiring included DS18 Plug and Play Harley Audio Upgrade The 1998-2013 Harley-Davidson Plug and Play Audio System with DS18 is designed for riders who want a louder, cleaner, and more aggressive audio upgrade without piecing together random parts. This bundle gives you the core components needed to upgrade the fairing speaker system on compatible Road Glide and Street Glide models. With the DS18 ION1600.4D four-channel amplifier and DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers, this system is built for strong output, efficient power, and better performance than basic factory Harley audio. What Comes in the Kit DS18 ION1600.4D four-channel amplifier 2 x DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers Bike-specific amplifier rack Radio-specific plug and play wiring Fitment and Options Motorcycle Fitment 1998-2013 Harley-Davidson Road Glide and Street Glide models Bike Model Options Road Glide or Street Glide Radio Options Plug and play for stock Harley radio or aftermarket radio Amplifier DS18 ION1600.4D four-channel amplifier Speakers 2 x DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers Amplifier Rack Bike-specific amplifier rack included Wiring Radio-specific plug and play wiring included Installation Type Plug and play audio system Why This DS18 Kit Makes Sense Matched DS18 System This bundle combines DS18 amplifier power, DS18 6.5 inch speakers, a bike-specific rack, and radio-specific wiring into one cleaner Harley audio package. Road Glide and Street Glide Options Select the correct model option so the kit is built around your 1998-2013 Harley-Davidson Touring fairing setup. Stock or Aftermarket Radio Choose the correct radio option so the plug and play wiring matches your current source unit setup. ION1600.4D Amplifier The DS18 ION1600.4D gives this kit strong four-channel amplifier power in a compact motorcycle-friendly package. Hybrid Slim Loudspeakers The DS18 PRO-HY6 MSL speakers are built for loud, clear motorcycle audio where output and fitment matter. GBS Built Bundle Garage Bagger Stereo builds plug and play Harley audio packages around real motorcycle audio needs, not generic car audio parts. Best For 1998-2013 Harley-Davidson Road Glide audio upgrades 1998-2013 Harley-Davidson Street Glide audio upgrades Riders upgrading from factory fairing speakers Harley owners wanting a DS18 amp and speaker package Stock radio and aftermarket radio audio builds Motorcycle audio systems that need loud, clear speaker output Important Ordering Notes Choose the correct bike model and radio type before ordering. Road Glide and Street Glide kits use bike-specific parts, and the wiring setup may differ depending on whether your bike has the stock Harley radio or an aftermarket radio. If you are not sure which option is correct for your bike, contact Garage Bagger Stereo before placing your order. Related Motorcycle Audio Categories Harley Audio Kits 2014-2023 Harley Plug and Play Kits 2023.5+ Harley Plug and Play Kits Harley Plug and Play Amplifiers Speakers and Amplifiers Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Brands in This Kit DS18 Motorcycle Audio Motorcycle 6.5 Pro Coaxial Speakers Motorcycle Audio Installation in Taylors, SC FAQ Will this kit fit both Road Glide and Street Glide models? Yes. This bundle has options for 1998-2013 Harley-Davidson Road Glide and Street Glide models. Choose the correct bike model before ordering. Does this kit work with the stock Harley radio? Yes. This kit can be ordered plug and play for the stock Harley radio. Does this kit work with an aftermarket radio? Yes. This kit also has an aftermarket radio option. Select the correct radio type before ordering. Are the speakers included? Yes. This kit includes two DS18 PRO-HY6 MSL 6.5 inch Hybrid Slim loudspeakers. Is wiring included? Yes. Radio-specific plug and play wiring is included for the selected kit configuration. Need Help Choosing the Right DS18 Kit? Call Garage Bagger Stereo before ordering if you are unsure whether your 1998-2013 Harley-Davidson Road Glide or Street Glide needs the stock radio or aftermarket radio version. Call 864-334-6131 Ask GBS for HelpSale -
2014-2023 Harley-Davidson 2-Speaker Plug and Play Audio System | DS18
Vendor:DS18 Motorcycle Audio2014–2023 ROAD GLIDE OR STREET GLIDE 2014–2023 Harley-Davidson 2-Speaker Plug-and-Play Audio System | DS18 Upgrade a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide with a complete two-speaker audio system built around a DS18 ION1600.4D amplifier, two high-output 6.5-inch hybrid speakers, factory-radio integration and the primary power, mounting and installation components required for the selected motorcycle. Select Road Glide or Street Glide before ordering so the system can be supplied with the correct fairing-specific amplifier mounting configuration. Two amplifier channels power the included speakers, while two channels remain available for a properly matched future rear-speaker upgrade. Check Motorcycle Fitment See Everything Included Complete Two-Speaker Audio System Road Glide and Street Glide options Compatible 2014–2023 Harley-Davidson Touring platform DS18 ION1600.4D four-channel Class-D amplifier Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers 4-ohm nominal impedance per speaker 150 watts RMS per included speaker Built-in 1-inch titanium compression drivers DS18 factory-radio plug-and-play harness 4-AWG amplifier power wiring Bike-specific amplifier mounting solution Two amplifier channels available for future expansion Complete 2-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package combines the amplifier, front fairing speakers, factory-radio signal interface, power wiring and motorcycle-specific mounting components required to build a complete two-speaker audio system in a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide. The included DS18 PRO-HY6.4MSL speakers combine a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. The hybrid design delivers the midrange projection and high-frequency output needed to overcome motorcycle, road and wind noise. The DS18 ION1600.4D provides four channels of full-range Class-D power. Two channels operate the included fairing speakers. The remaining two channels can support a compatible rear-speaker pair after the correct speakers, wiring, mounting hardware and amplifier setup are added. Plug-and-play clarification: The included RY-HARNESS.HD provides a plug-and-play connection to compatible factory Harley-Davidson radio wiring. The complete installation still requires amplifier power wiring, speaker mounting, secure amplifier mounting and proper gain and crossover setup. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible 2014–2023 sharknose-fairing motorcycle. This option must include the amplifier rack and front-speaker installation components configured for the Road Glide fairing. 2014–2023 Road Glide fairing configuration Road Glide-specific amplifier mounting solution Two front fairing speakers Factory-radio integration harness Street Glide Option Select Street Glide for a compatible 2014–2023 batwing-fairing motorcycle. This option must include the amplifier rack and front-speaker installation components configured for the Street Glide fairing. 2014–2023 Street Glide fairing configuration Street Glide-specific amplifier mounting solution Two front fairing speakers Factory-radio integration harness Confirm the motorcycle before ordering: Verify the model year, exact trim, Road Glide or Street Glide fairing, factory radio, factory amplifier configuration and any existing audio modifications. Everything Included in the Audio System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms and 800 watts RMS × 2 bridged at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers One pair of 6.5-inch shallow hybrid speakers with 4-ohm impedance, 150-watt RMS power handling and built-in 1-inch titanium compression drivers. DS18 RY-HARNESS.HD A factory-radio plug-and-play amplifier harness with four-channel RCA pre-output, oxygen-free copper wiring and water-resistant construction. NVS 4-AWG Amplifier Power Kit Heavy-gauge amplifier power and ground wiring with quick-disconnect hardware for cleaner installation, saddlebag removal and future servicing. Front-Speaker Installation Components Fairing-specific speaker spacers, mounting hardware and installation components are supplied according to the selected Road Glide or Street Glide configuration. Bike-Specific Amplifier Rack The selected motorcycle option includes a Road Glide- or Street Glide-specific amplifier mounting solution for a secure, vibration-resistant installation. Two-speaker system: Rear speakers, saddlebag speaker adapters, speaker lids, rear-speaker wiring and rear grilles are not included unless specifically added to the order. Speaker Impedance and Amplifier Channel Configuration Front-Left Speaker One PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated ION1600.4D amplifier channel. Front-Right Speaker The second PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Two Available Channels Two amplifier channels remain available for compatible future rear speakers after the required wiring and mounting components are installed. Included Speaker Count Two speakers / one pair Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Amplifier Output at 4Ω 240W RMS per channel Front-Left Channel One PRO-HY6.4MSL speaker at 4Ω Front-Right Channel One PRO-HY6.4MSL speaker at 4Ω Loaded Amplifier Channels Two Available Amplifier Channels Two Bridging Required No Output must be limited correctly: The ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The DS18 ION1600.4D is a compact full-range Class-D amplifier that provides substantial output from a motorcycle-friendly chassis. It can power the included two-speaker system while retaining two channels for a properly designed future expansion. 240W × 4 at 4Ω Published four-channel output for compatible 4-ohm speaker systems. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm speaker systems. 800W × 2 Bridged Published bridged output into compatible 4-ohm speaker loads. Four Full-Range Channels Two channels operate the included speakers while two remain available for future rear-speaker expansion. Compact Chassis The amplifier is designed to deliver high output from a compact installation footprint. System Setup Controls Gain and crossover controls allow the output to be configured for the included hybrid speakers. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 channels Output at 2Ω 400W RMS × 4 channels Bridged Output at 4Ω 800W RMS × 2 channels Minimum Stereo Impedance 2Ω per channel Minimum Bridged Impedance 4Ω System Configuration Two channels used and two channels available Built-In DSP No Power Wiring 4-AWG amplifier wiring required DS18 PRO-HY6.4MSL 6.5-Inch Hybrid Speakers Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. The two-way hybrid design provides both midrange and upper-frequency output from the front fairing speaker locations. 150W RMS Each included speaker is rated for 150 watts RMS and 300 watts maximum. 4-Ohm Impedance Each speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Hybrid Two-Way Design A built-in titanium compression driver supplies high-frequency output without a separately mounted tweeter. Shallow Mounting Depth The 2.82-inch mounting depth supports tighter motorcycle fairing installations. IP65 Rated Water-resistant construction helps protect the speakers in motorcycle and powersports environments. 140Hz High-Pass Reference DS18 publishes 140Hz as the recommended high-pass crossover reference for this speaker. Speaker Model DS18 PRO-HY6.4MSL Quantity Included Two speakers / one pair Nominal Size 6.5 inches / 165.1mm Nominal Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Sensitivity 93dB, 1W / 1m Frequency Response 100Hz–20kHz Recommended High-Pass Crossover 140Hz Speaker Design Two-way shallow hybrid loudspeaker Midrange Voice Coil 1.5 inches / 38.6mm Compression Driver 1-inch titanium diaphragm with neodymium magnet Cone Material Water-resistant treated paper Weather Rating IP65 Mounting Cutout 5.6 inches / 142mm Mounting Depth 2.82 inches / 72mm Protective Grille Included with each speaker Check fairing clearance: Pod modification, magnet-cap clearance work, additional speaker spacing or other installation adjustments may be required depending on the exact motorcycle and factory enclosure. Factory Harley-Davidson Radio Integration The DS18 RY-HARNESS.HD connects a compatible 2014–2023 factory Harley-Davidson radio system to the aftermarket amplifier without cutting the primary factory-radio signal wiring. OEM Plug-and-Play Connection Factory-style connections simplify amplifier signal integration. Four-Channel RCA Pre-Output Four RCA channels support the included four-channel amplifier and future rear-speaker expansion. OFC Wiring Oxygen-free copper conductors and noise-rejecting RCA connections support reliable signal transfer. Designed for compatible 2014–2023 Street Glide and Road Glide models Factory-radio plug-and-play connection Four-channel RCA pre-output Oxygen-free copper wiring Water-resistant harness construction No cutting of the primary factory-radio signal wiring Factory configuration matters: Motorcycles with a factory amplifier, CVO equipment, aftermarket radio or previous audio modifications may require additional signal-integration work. Power Wiring and Amplifier Mounting 4-AWG Amplifier Wiring The included NVS power kit provides the heavy-gauge power and ground wiring needed for the amplifier, along with quick-disconnect connections for serviceability. Road Glide or Street Glide Rack Road Glide and Street Glide fairings use different amplifier mounting layouts. The selected motorcycle option determines the mounting solution supplied with the kit. Disconnect the motorcycle battery before installation. Mount the amplifier securely with adequate airflow. Install the correct fuse protection near the battery connection. Protect wiring from steering movement, sharp edges and heat. Use clean, secure power and ground connections. Verify all rack and fairing hardware before final assembly. Inspect battery and charging-system condition before high-output use. Gain and Crossover Setup Correct setup is required because the ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Connect one included speaker to each of two amplifier channels. Do not bridge the amplifier channels for the included speakers. Configure the two active channels for high-pass operation. Use 140Hz as the published speaker high-pass reference. Adjust the final crossover for the fairing and intended output level. Set amplifier gain using measured clean output. Do not use the amplifier gain control as a volume control. Reduce output immediately if distortion or mechanical noise is heard. Verify speaker polarity before closing the fairing. Professional setup recommended: Incorrect gain or crossover settings can damage the included speakers even when the system initially appears to play normally. Future Rear-Speaker Expansion The two unused amplifier channels provide a direct path for a future rear-speaker upgrade. Rear expansion must be designed around compatible speaker impedance, RMS power handling, mounting depth, wiring and crossover requirements. Already Available in the System Two unused amplifier channels Four-channel factory-radio interface Independent amplifier channel controls 4-AWG amplifier power foundation Required for Rear Expansion Compatible rear speakers Saddlebag lids, adapters or speaker pods Rear-speaker wiring and connectors Correct impedance and RMS-power matching Final crossover and gain setup Rear equipment is not included: This remains a two-speaker audio system until compatible rear speakers, mounting components and wiring are purchased and installed. Complete System Specifications System Type Two-speaker plug-and-play motorcycle audio system Motorcycle Options Road Glide or Street Glide Vehicle Application Compatible 2014–2023 Harley-Davidson models Amplifier DS18 ION1600.4D four-channel Class-D amplifier Amplifier Output at 4Ω 240W RMS × 4 channels Included Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Loaded Amplifier Channels Two channels at 4Ω each Available Amplifier Channels Two Factory-Radio Interface DS18 RY-HARNESS.HD Power Wiring NVS 4-AWG amplifier power kit with quick disconnect Amplifier Mounting Road Glide- or Street Glide-specific mounting solution Built-In DSP No Rear Speakers Included No Shopify Option Choose Road Glide or Street Glide Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, exact model, fairing style, factory radio, factory amplifier and current speaker configuration before ordering. Select Road Glide or Street Glide before adding the kit to the cart. The package includes two front fairing speakers. Each included speaker has a nominal 4-ohm impedance. Two amplifier channels remain available for future expansion. The amplifier does not include built-in DSP. Factory-amplified motorcycles may require additional integration. Speaker pod modification or additional spacing may be required. Correct gain and high-pass crossover setup are required. Rear speakers and rear mounting components are not included. Professional installation and system setup are recommended. Best For 2014–2023 Harley-Davidson Road Glide audio upgrades 2014–2023 Harley-Davidson Street Glide audio upgrades Riders retaining a compatible factory Harley-Davidson radio High-output two-speaker fairing systems Riders planning to add saddlebag speakers later Four-channel systems designed for staged expansion Professional motorcycle audio installations Related Motorcycle Audio Categories Speakers and Amplifiers Shop Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Parts Signal and Electrical Support Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Plan a Complete Motorcycle Audio System Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries DS18 2-Speaker Plug-and-Play Audio System FAQ How many speakers are included? The system includes two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers for the front fairing. What impedance are the included speakers? Each included speaker has a nominal impedance of 4 ohms. How much power can each speaker handle? Each PRO-HY6.4MSL is rated for 150 watts RMS and 300 watts maximum. How much power does the amplifier produce at 4 ohms? The ION1600.4D is rated for up to 240 watts RMS on each of its four channels at 4 ohms. Is the amplifier too powerful for the speakers? The amplifier can produce more continuous power than each speaker is rated to handle. It can be used safely when gain, high-pass crossover and maximum clean output are configured correctly. Are all four amplifier channels used? No. The supplied two-speaker system uses two channels. Two additional channels remain available for a compatible future rear-speaker pair. Does the system work with the factory Harley-Davidson radio? The included RY-HARNESS.HD is designed to integrate an aftermarket amplifier with compatible 2014–2023 Harley-Davidson factory radios. Does the factory radio wiring need to be cut? The compatible factory-radio signal connection uses a plug-and-play harness and does not require cutting the primary factory signal wiring. Does the amplifier include DSP? No. The ION1600.4D provides conventional gain and crossover controls but does not include digital signal processing. Are the speakers weather resistant? Yes. The speakers are IP65 rated and use a water-resistant treated paper cone. They should not be described as submersible. Can rear speakers be added later? Yes. The two available amplifier channels can power a properly matched rear-speaker pair after the required speakers, mounting hardware, wiring and system setup are added. Is the Road Glide amplifier rack the same as the Street Glide rack? No. Road Glide and Street Glide fairings require different amplifier mounting configurations. Select the correct motorcycle option before ordering. Will the speakers fit without modification? Fitment depends on the exact fairing enclosure and existing equipment. Speaker pod modification, additional spacing or other clearance work may be required. Are saddlebag speakers included? No. This is a two-speaker audio system. Rear speakers, saddlebag mounting components and rear-speaker wiring must be purchased separately. Need Help Matching This 2-Speaker Harley Audio System? Garage Bagger Stereo can help verify Road Glide or Street Glide fitment, speaker impedance selection, amplifier matching, fairing and amplifier mounting, power and speaker wiring, and factory-radio signal integration before installation. Installation Services Request a Custom Build -
2014-2023 Harley-Davidson Road & Street Glide 4-Speaker Audio System | DS18 / Cerwin-Vega
Vendor:DS18 Motorcycle Audio2014-2023 HARLEY-DAVIDSON FOUR-SPEAKER SYSTEM Road Glide & Street Glide Plug-and-Play Audio System Upgrade a compatible 2014-2023 Harley-Davidson Road Glide or Street Glide with a complete four-speaker package built around DS18 amplifier power, hybrid front speakers and Cerwin-Vega 6×9 saddlebag speakers. The factory-radio signal connection is handled through a DS18 plug-and-play harness. Select the correct motorcycle before ordering so the package can be configured with the proper fairing-specific amplifier mounting solution. Check Fitment See Everything Included Complete Front and Rear Audio Upgrade Road Glide and Street Glide options Designed for compatible 2014-2023 Harley Touring models DS18 ION1600.4D four-channel amplifier 240 watts RMS × 4 channels at 4 ohms Two DS18 PRO-HY6.4MSL front speakers Two Cerwin-Vega ST69CX 6×9 rear speakers Four 4-ohm speaker channels Factory Harley radio integration harness 4-AWG amplifier power wiring Cut-in saddlebag lid installation system Complete Harley Audio System Overview This Garage Bagger Stereo package combines the front fairing speakers, rear saddlebag speakers, four-channel amplifier, factory-radio interface, power wiring and motorcycle-specific mounting components required for a complete 2014-2023 Harley-Davidson Touring audio upgrade. Two DS18 PRO-HY6.4MSL hybrid loudspeakers upgrade the front fairing locations. Each speaker combines a 6.5-inch midrange driver with an integrated titanium compression driver to produce strong vocal clarity and high-frequency projection in open-air riding conditions. The Cerwin-Vega cut-in lid system adds two ST69CX 6×9 speakers to the factory saddlebag lids. All four speakers connect to individual channels of the DS18 ION1600.4D amplifier. Important installation distinction: The factory-radio interface is plug-and-play, but the rear-speaker installation is not cutting-free. Both compatible factory saddlebag lids must be permanently cut using the supplied templates. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible 2014-2023 sharknose-fairing motorcycle. The package must include the amplifier mounting solution configured for the Road Glide fairing. Street Glide Option Select Street Glide for a compatible 2014-2023 batwing-fairing motorcycle. The package must include the amplifier mounting solution configured for the Street Glide fairing. Factory-radio application: The included DS18 RY-HARNESS.HD is designed around compatible factory Harley-Davidson radio integration. Aftermarket-radio installations may require a different signal and remote-turn-on configuration. Confirm the motorcycle year and exact model. Select Road Glide or Street Glide before adding the kit to the cart. Confirm that the motorcycle retains a compatible factory radio. Identify any factory amplifier or CVO audio equipment before ordering. Verify that the motorcycle has compatible factory saddlebag lids. Everything Included in the System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers Two 6.5-inch 4-ohm hybrid loudspeakers with built-in 1-inch titanium compression drivers for the front fairing. DS18 RY-HARNESS.HD Factory-radio plug-and-play interface with four-channel RCA outputs, integrated high-to-low conversion, OFC wiring and amplifier remote turn-on. 4-AWG Amplifier Power Kit Heavy-gauge amplifier power and ground wiring with the protection and installation hardware configured for the package. Bike-Specific Amplifier Mounting The package is configured with a Road Glide or Street Glide mounting solution according to the motorcycle selected at checkout. Cerwin-Vega 6×9 Lid Kit One pair of 4-ohm ST69CX 6×9 speakers with cut-in lid grilles, left and right templates, half-inch spacers and speaker wiring. Confirm current package contents: Product substitutions or mounting-hardware changes should be reflected in the Shopify variant and fulfillment notes before the order is released. Speaker Impedance and Amplifier Channel Configuration Front Fairing Channels Each DS18 PRO-HY6.4MSL front speaker presents a nominal 4-ohm load to its assigned amplifier channel. Rear Saddlebag Channels Each Cerwin-Vega ST69CX rear speaker presents a nominal 4-ohm load to its assigned amplifier channel. Channel 1 Front-left PRO-HY6.4MSL — 4Ω Channel 2 Front-right PRO-HY6.4MSL — 4Ω Channel 3 Rear-left ST69CX — 4Ω Channel 4 Rear-right ST69CX — 4Ω Amplifier Output at 4Ω 240 watts RMS per channel Front Speaker Rating 150 watts RMS per speaker Rear Speaker Rating 125 watts RMS per speaker Unused Amplifier Channels None Output must be limited: The ION1600.4D can produce more continuous power at 4 ohms than either included speaker model is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The ION1600.4D is a compact full-range Class-D amplifier with high-level and RCA inputs, adjustable filtering, a cooling fan and power, protection and clipping indicators. 240W × 4 at 4Ω Published output for the four included 4-ohm speaker channels. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm systems. 800W × 2 Bridged Published bridged output into compatible 4-ohm loads. Adjustable Crossovers Selectable low-pass, high-pass and full-range operating modes. Clip Indicator Visual clipping indication assists with measured gain setup. Compact Motorcycle Installation Small chassis with vibration-resistant surface-mount construction. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 Output at 2Ω 400W RMS × 4 Bridged Output at 4Ω 800W RMS × 2 Frequency Response 10Hz–20kHz Signal-to-Noise Ratio Greater than 95dB Input Range 0.2–6V Crossover Modes LPF / HPF / FULL Crossover Range 40Hz–2kHz Minimum Impedance 2Ω stereo / 4Ω bridged Power Input 4-AWG Published External Fuse 140A Cooling Fan Yes Dimensions 7.32 × 4.72 × 2 inches / 186 × 120 × 52mm DS18 PRO-HY6.4MSL Front Fairing Speakers The PRO-HY6.4MSL combines a slim 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. This hybrid construction provides midrange and high-frequency output from one compact speaker. Speaker Model PRO-HY6.4MSL Quantity Two speakers Nominal Size 6.5 inches Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Frequency Response 100Hz–20kHz Sensitivity 97dB Compression Driver 1-inch titanium diaphragm Speaker Cone Water-resistant treated paper Weather Rating IP65 Mounting Depth 2.82 inches / 72mm Check fairing clearance: Speaker pod modification, spacing or other installation adjustments may be required depending on the motorcycle model, factory enclosure and existing components. Cerwin-Vega ST69CX 6×9 Saddlebag Speakers The rear system uses one pair of Cerwin-Vega ST69CX 4-ohm 6×9 coaxial speakers. The cut-in kit converts compatible factory saddlebag lids into rear speaker locations without requiring replacement painted lids. Speaker Model Cerwin-Vega ST69CX Quantity Two speakers / one pair Speaker Size 6×9 inches Speaker Design Two-way high-output coaxial speaker Impedance 4Ω per speaker Power Handling 125W RMS / 250W maximum per speaker Tweeter Titanium dome Sensitivity 93.5dB Mounting Depth 3.875 inches Included Lid Components Grilles, templates, half-inch spacers and speaker wiring Water-resistant, not waterproof: Protect the speakers from direct heavy water exposure and follow the manufacturer’s care instructions. Factory Radio Integration The DS18 RY-HARNESS.HD connects to compatible 2014-2023 Harley-Davidson factory-radio wiring and supplies the low-level signal and remote turn-on needed for aftermarket amplifier integration. Four RCA Outputs Provides four low-level channels for the four-channel amplifier. Integrated Conversion Built-in load resistors and high-to-low conversion condition the factory signal. Remote Turn-On Supplies amplifier activation when the compatible factory radio turns on. Factory harness connection without cutting the radio signal wiring Four-channel RCA pre-output Oxygen-free copper wiring Noise-rejecting RCA construction Water-resistant harness construction Compatible factory-radio applications only Saddlebag Lid Installation The supplied cut-in kit uses model-specific left and right templates to create the 6×9 speaker openings in compatible factory saddlebag lids. The grilles and half-inch spacer rings complete the visible installation. Remove and inspect both saddlebag lids before cutting. Confirm template orientation for the left and right lids. Check speaker depth and electrical-lock clearance. Confirm hinge, tether and weather-seal clearance. Route the rear-speaker wiring before final assembly. Seal and protect all cut edges after modification. Test speaker polarity before reinstalling the lids. Permanent modification: Cutting the factory saddlebag lids is irreversible. Professional installation is recommended when the installer is not experienced with Harley-Davidson lid conversions. Amplifier Setup and Speaker Protection The amplifier has significantly more available power at 4 ohms than the included front and rear speakers are rated to handle continuously. Measured setup is essential to prevent damage. Connect one speaker to each amplifier channel. Set the amplifier channels to high-pass operation. Set separate front and rear gains when the amplifier layout permits. Use measured clean voltage rather than setting gain by ear. Do not use the amplifier gain control as a volume control. Watch the clipping indicator during setup. Reduce output immediately if distortion or mechanical noise is heard. Confirm the correct external fuse near the battery. Evaluate battery and charging-system condition before high-output use. Complete System Specifications Vehicle Application Compatible 2014-2023 Harley-Davidson Road Glide or Street Glide Motorcycle Options Road Glide or Street Glide Radio Application Compatible factory Harley-Davidson radio Amplifier DS18 ION1600.4D Amplifier Output 240W RMS × 4 at 4Ω Front Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Rear Speakers Two Cerwin-Vega ST69CX 6×9 coaxial speakers Speaker Impedance 4Ω per speaker Loaded Amplifier Channels All four channels at 4Ω each Factory Radio Harness DS18 RY-HARNESS.HD Power Wiring 4-AWG amplifier installation kit Amplifier Mounting Bike-specific Road Glide or Street Glide mounting solution Rear Mounting Cerwin-Vega 6×9 cut-in saddlebag lid system Saddlebag Cutting Required Yes Built-In DSP No Fitment and Ordering Notes Submit the complete motorcycle information: Confirm the year, exact model, Road Glide or Street Glide fairing, factory radio, factory amplifier configuration and current speaker locations. Select Road Glide or Street Glide before ordering. The included radio harness is intended for compatible factory radios. Two front and two rear speakers are included. All four included speakers are 4 ohms. All four amplifier channels are used. The amplifier does not include built-in DSP. Front speaker pod modification or spacing may be required. Both factory saddlebag lids require permanent cutting. Correct amplifier gain and crossover setup are required. Professional installation is strongly recommended. Best For 2014-2023 Harley-Davidson Road Glide audio upgrades 2014-2023 Harley-Davidson Street Glide audio upgrades Riders keeping a compatible factory Harley radio Four-speaker front-and-rear audio systems Motorcycles using factory saddlebag lids High-output highway audio builds Professional motorcycle audio installations Related Motorcycle Audio Categories 2014-2023 Harley Audio 2014-2023 Harley Plug-and-Play Kits Shop Motorcycle Speakers Motorcycle Amplifiers System Components Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Harley Four-Speaker Audio System FAQ Which motorcycles does this system fit? It is configured for compatible 2014-2023 Harley-Davidson Road Glide and Street Glide motorcycles. Select the correct fairing style before ordering. How many speakers are included? Four speakers are included: two DS18 6.5-inch front speakers and two Cerwin-Vega 6×9 rear saddlebag speakers. What impedance are the speakers? All four included speakers have a nominal impedance of 4 ohms. How much power does the amplifier produce? The ION1600.4D produces 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms or 800 watts RMS × 2 bridged at 4 ohms. Does the amplifier include DSP? No. The ION1600.4D provides conventional gain and crossover controls but does not contain an integrated digital signal processor. Does this work with the factory Harley radio? The included RY-HARNESS.HD is designed to integrate the amplifier with compatible 2014-2023 factory Harley-Davidson radios. Does the factory radio wiring need to be cut? The compatible factory-radio signal connection uses the plug-and-play DS18 harness and does not require cutting the factory signal wiring. Do the saddlebag lids need to be cut? Yes. Both compatible factory saddlebag lids must be permanently cut to install the Cerwin-Vega 6×9 lid system. Are the speakers waterproof? The DS18 front speakers are IP65 rated, and the Cerwin-Vega rear speakers are water resistant. They should not be represented as submersible or completely waterproof. Why does the amplifier need careful gain setup? The amplifier can produce more continuous power per channel than the included speakers are rated to handle. Gain and crossover settings must limit clean output to safe levels. Is a Road Glide amplifier rack included with the Street Glide version? No. The mounting solution must match the selected motorcycle. The Road Glide and Street Glide versions require different fairing-specific mounting configurations. Is professional installation recommended? Yes. The package requires amplifier wiring, measured gain setup, fairing work and permanent saddlebag lid modification. Need Help Matching This Harley Audio System? Garage Bagger Stereo can help verify motorcycle fitment, speaker impedance selection, amplifier matching, fairing and saddlebag mounting, power and speaker wiring, and factory-radio signal integration before installation. Installation Services Request a Custom Build -
2023.5+ Harley-Davidson 2-Speaker Plug and Play Audio System | DS18
Vendor:DS18 Motorcycle Audio2023.5+ HARLEY-DAVIDSON PLUG-AND-PLAY AUDIO 2023.5+ Harley-Davidson 2-Speaker Plug-and-Play Audio System | DS18 Upgrade a compatible 2023.5 and newer Harley-Davidson Road Glide or Street Glide with a complete two-speaker audio system built around a DS18 four-channel amplifier, two high-output hybrid fairing speakers, NAV-TV factory A2B integration and the primary power and installation components required for the system. Select Road Glide or Street Glide before ordering so the correct motorcycle configuration can be supplied. Two amplifier channels power the included front speakers, while two channels remain available for a properly matched future rear-speaker upgrade. Check Motorcycle Fitment See Everything Included Complete Two-Speaker Audio System Road Glide and Street Glide options Designed for compatible late-model Harley A2B systems DS18 ION1600.4D four-channel Class-D amplifier 240 watts RMS × 4 channels at 4 ohms Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers 150 watts RMS per included speaker 4-ohm nominal impedance per speaker Built-in 1-inch titanium compression drivers NAV-TV ZEN-H A2B factory-radio integration 4-AWG amplifier power wiring Half-inch speaker spacers included Two amplifier channels available for expansion Complete 2-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package combines the amplifier, two front fairing speakers, factory A2B signal interface, amplifier power wiring and speaker-spacing components required to build a high-output two-speaker audio system in a compatible late-model Harley-Davidson Road Glide or Street Glide. The included DS18 PRO-HY6.4MSL speakers combine a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. This hybrid design produces both midrange and high-frequency output from each fairing speaker location. The DS18 ION1600.4D supplies four full-range amplifier channels. Two channels operate the included front speakers. The remaining channels can support a properly matched rear-speaker pair after the required speakers, wiring, mounting components and amplifier setup are added. Plug-and-play clarification: The NAV-TV interface provides plug-and-play factory A2B signal integration. The complete installation still requires amplifier power wiring, speaker mounting, proper cable routing and measured gain and crossover setup. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible late-model sharknose-fairing motorcycle using the factory Harley-Davidson A2B audio platform. Road Glide fairing configuration Two front fairing speakers Half-inch speaker spacers NAV-TV A2B integration Street Glide Option Select Street Glide for a compatible late-model batwing-fairing motorcycle using the factory Harley-Davidson A2B audio platform. Street Glide fairing configuration Two front fairing speakers Half-inch speaker spacers NAV-TV A2B integration Exact model verification required: Confirm the motorcycle year, model, trim, factory radio, factory amplifier, A2B configuration and existing audio equipment before ordering. Not every motorcycle described broadly as 2023.5+ uses identical factory audio hardware or fairing geometry. Current Plug-and-Play Kit Lead Time The current listed fulfillment time for this plug-and-play system is approximately 5–10 business days. Build time may vary with component availability and motorcycle configuration. Everything Included in the Audio System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms and 800 watts RMS × 2 bridged at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers One pair of 6.5-inch shallow hybrid speakers with 4-ohm impedance, 150-watt RMS power handling and built-in 1-inch titanium compression drivers. NAV-TV ZEN-H A2B Interface One factory A2B interface that converts the compatible Harley radio signal into eight channels of 5-volt analog RCA output for aftermarket amplifier integration. 4-AWG Amplifier Power Kit Heavy-gauge power and ground wiring with the primary connections and protection hardware required for the amplifier installation. Half-Inch Speaker Spacers Speaker-spacing components provide additional mounting clearance for the DS18 hybrid speakers in the applicable front fairing locations. Road Glide or Street Glide Configuration The selected Shopify variant identifies which motorcycle and fairing configuration the system is being prepared for. Two-speaker system: Rear speakers, saddlebag speaker adapters, speaker lids, rear-speaker wiring, rear grilles and a rear mounting system are not included unless separately added to the order. Speaker Impedance and Amplifier Channel Configuration Front-Left Speaker One PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated ION1600.4D amplifier channel. Front-Right Speaker The second PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Two Available Channels Two amplifier channels remain available for a compatible future rear-speaker pair after the required mounting and wiring components are installed. Included Speaker Count Two speakers / one pair Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Amplifier Output at 4Ω 240W RMS per channel Front-Left Channel One PRO-HY6.4MSL speaker at 4Ω Front-Right Channel One PRO-HY6.4MSL speaker at 4Ω Loaded Amplifier Channels Two Available Amplifier Channels Two Bridging Required No Output must be limited correctly: The ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The ION1600.4D is a compact full-range Class-D amplifier that delivers substantial output from a motorcycle-friendly chassis. High-level and RCA inputs, variable crossovers, protection circuits and a clipping indicator support flexible system integration and measured setup. 240W × 4 at 4Ω Published four-channel output for compatible 4-ohm speaker systems. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm speaker systems. 800W × 2 Bridged Published bridged output into properly configured 4-ohm loads. Adjustable Crossovers Low-pass, high-pass and full-range modes support system-specific frequency control. Clip Indicator Power, protection and clipping indicators assist with safe amplifier setup. Compact Chassis The small amplifier footprint helps conserve installation space on a motorcycle. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 channels Output at 2Ω 400W RMS × 4 channels Bridged Output at 4Ω 800W RMS × 2 channels Frequency Response 10Hz–20kHz Signal-to-Noise Ratio Greater than 95dB Efficiency at 4Ω 88% Damping Factor 210 Total Harmonic Distortion 0.01% Input Range 0.2–6V Crossover Modes LPF / HPF / FULL Crossover Range 40Hz–2kHz Minimum Impedance 2Ω stereo / 4Ω bridged Power Input Terminal 4-AWG Published External Fuse 140A Cooling Fan Yes Dimensions 7.32 × 4.72 × 2 inches / 186 × 120 × 52mm Fuse and wiring verification: Confirm that the supplied 4-AWG power kit, fuse holder and installed fuse match the amplifier’s published current and protection requirements before operating the system. DS18 PRO-HY6.4MSL Hybrid Fairing Speakers Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange loudspeaker with a built-in 1-inch titanium compression driver. This two-way hybrid arrangement provides both midrange projection and high-frequency output from one speaker assembly. 150W RMS Each included speaker is rated for 150 watts RMS and 300 watts maximum. 4-Ohm Impedance Each speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Hybrid Two-Way Design A built-in titanium compression driver supplies high-frequency output without a separate tweeter location. Shallow Mounting Depth The 2.82-inch mounting depth supports tight motorcycle fairing installations. IP65 Rated Water-resistant construction and a protected grille support powersports use. 140Hz High-Pass Reference DS18 publishes 140Hz as the recommended high-pass crossover reference. Speaker Model DS18 PRO-HY6.4MSL Quantity Included Two speakers / one pair Nominal Size 6.5 inches / 165.1mm Nominal Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Sensitivity 93dB, 1W / 1m Frequency Response 100Hz–20kHz Recommended High-Pass Crossover 140Hz Speaker Design Two-way shallow hybrid loudspeaker Midrange Voice Coil 1.5 inches / 38.6mm Compression Driver 1-inch titanium diaphragm with neodymium magnet Cone Material Water-resistant treated paper Weather Rating IP65 Front Mount Cutout 5.6 inches / 142mm Mounting Depth 2.82 inches / 72mm Protective Grille Included with each speaker Check fairing clearance: Half-inch spacers are included, but additional pod modification, magnet-cap clearance work or other installation adjustments may still be required depending on the exact motorcycle and factory enclosure. NAV-TV ZEN-H Factory A2B Integration The NAV-TV ZEN-H converts the compatible factory Harley-Davidson A2B radio signal into eight channels of analog RCA output for the DS18 amplifier and future system expansion. Eight Analog Outputs Supplies eight channels of low-level analog RCA output at up to 5 volts RMS. Factory Control Retention Retains compatible factory volume, balance, fader and radio EQ functions. Direct A2B Integration Interfaces directly with the compatible factory A2B data and audio system. Designed for compatible late-model Harley A2B audio systems Eight-channel analog RCA output Up to 5-volt RMS output Factory volume retention Factory balance and fader retention Factory EQ preset retention where supported No replacement aftermarket radio required No built-in system DSP: This package uses the standard ZEN-H interface and the conventional DS18 ION1600.4D amplifier. Advanced equalization, time alignment and output limiting require a separately added compatible DSP. Power Wiring and Speaker Installation 4-AWG Amplifier Wiring The included power kit supplies the heavy-gauge power and ground foundation required for the ION1600.4D amplifier. Half-Inch Speaker Spacers The supplied spacers provide additional fairing clearance for the shallow hybrid speakers. Disconnect the motorcycle battery before installation. Mount the amplifier securely with adequate ventilation. Install appropriate fuse protection close to the battery. Protect wiring from steering movement, heat and sharp edges. Use clean and secure battery and chassis connections. Confirm speaker depth and spacer clearance before assembly. Verify speaker polarity before reinstalling the fairing. Inspect battery and charging-system condition before high-output use. Gain and Crossover Setup Proper setup is critical because the ION1600.4D can produce more continuous power at 4 ohms than each included PRO-HY6.4MSL is rated to handle. Connect one front speaker to each of two amplifier channels. Do not bridge the amplifier channels for the included speakers. Configure the active channels for high-pass operation. Use 140Hz as the manufacturer’s published high-pass reference. Adjust the final crossover for the fairing and desired output. Set gain using measured clean output rather than by ear. Do not use amplifier gain as a volume control. Monitor the clipping indicator during setup. Reduce output immediately if distortion or mechanical noise occurs. Professional setup recommended: Incorrect gain or crossover settings can damage the speakers even when the system appears to play normally at moderate volume. Future Rear-Speaker Expansion Two unused amplifier channels and additional NAV-TV RCA outputs provide a path for a future rear-speaker upgrade. Rear expansion must be designed around compatible speaker impedance, RMS power handling, mounting depth, wiring and crossover requirements. Already Available Two unused amplifier channels Additional NAV-TV RCA outputs Four-channel amplifier crossover controls 4-AWG amplifier power foundation Required for Expansion Compatible rear speakers Saddlebag lids, adapters or speaker pods Rear-speaker wiring and connectors Correct impedance and RMS-power matching Final crossover and gain setup Rear equipment is not included: This remains a two-speaker audio system until compatible rear speakers, mounting components and wiring are purchased and installed. Complete System Specifications System Type Two-speaker plug-and-play motorcycle audio system Motorcycle Options Road Glide or Street Glide Vehicle Application Compatible 2023.5 and newer Harley-Davidson A2B applications Amplifier DS18 ION1600.4D four-channel Class-D amplifier Amplifier Output at 4Ω 240W RMS × 4 channels Included Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Loaded Amplifier Channels Two channels at 4Ω each Available Amplifier Channels Two Factory Signal Interface NAV-TV ZEN-H A2B interface NAV-TV Output Eight-channel analog RCA at up to 5V RMS Power Wiring 4-AWG amplifier power installation kit Speaker Spacers Half-inch spacers included Built-In DSP No Rear Speakers Included No Shopify Option Choose Road Glide or Street Glide Current Listed Lead Time Approximately 5–10 business days Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, exact model, trim, Road Glide or Street Glide fairing, factory radio, factory amplifier, A2B configuration and current speaker setup before ordering. Select Road Glide or Street Glide before adding the kit to the cart. The package includes two front fairing speakers. Each included speaker has a nominal 4-ohm impedance. Two amplifier channels remain available for future expansion. The package uses NAV-TV factory A2B integration. The amplifier does not include built-in DSP. Half-inch speaker spacers are included. Additional fairing modification may still be required. Correct gain and high-pass crossover setup are required. Rear speakers and rear mounting components are not included. Professional installation and system setup are recommended. Best For Compatible 2023.5+ Harley-Davidson audio upgrades 2024+ Road Glide front-speaker upgrades 2024+ Street Glide front-speaker upgrades Factory Skyline radio and A2B audio integration High-output two-speaker fairing systems Riders planning to add saddlebag speakers later Professional motorcycle audio installations Related Motorcycle Audio Categories 2023.5+ Harley Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Motorcycle Amplifiers Signal and Amplifier Support Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries 2023.5+ Harley 2-Speaker Audio System FAQ How many speakers are included? The system includes two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers for the front fairing. What impedance are the included speakers? Each included speaker has a nominal impedance of 4 ohms. How much power can each speaker handle? Each PRO-HY6.4MSL is rated for 150 watts RMS and 300 watts maximum. How much power does the amplifier produce at 4 ohms? The ION1600.4D produces up to 240 watts RMS on each of its four channels at 4 ohms. Is the amplifier too powerful for the speakers? The amplifier can produce more continuous power than each speaker is rated to handle. It can be used safely when gain, high-pass crossover and maximum clean output are configured correctly. Are all four amplifier channels used? No. Two channels power the supplied speakers. Two channels remain available for a compatible future rear-speaker pair. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley A2B signal into analog RCA outputs that can be connected to the aftermarket amplifier. Does the NAV-TV interface retain factory controls? It retains compatible factory volume, balance, fader and supported EQ functions while integrating the aftermarket amplifier. Does this package include DSP? No. The standard ZEN-H interface and ION1600.4D amplifier do not provide advanced system DSP. A compatible external processor can be added when equalization, time alignment or output limiting is needed. Are the speakers weather resistant? Yes. The speakers are IP65 rated and use water-resistant cones and protective grille cloth. They should not be described as submersible. Can rear speakers be added later? Yes. The two unused amplifier channels can power a properly matched rear-speaker pair after the required speakers, wiring, mounting hardware and system setup are added. Are speaker spacers included? Yes. The package includes half-inch spacers to provide additional fairing speaker clearance. Will the speakers fit without modification? Fitment depends on the motorcycle and factory speaker enclosure. Additional spacing, pod modification or clearance work may still be required. Are saddlebag speakers included? No. This is a two-speaker system. Rear speakers, saddlebag mounting parts and rear-speaker wiring must be purchased separately. How long does the kit take to fulfill? The current listed lead time is approximately 5–10 business days, subject to component availability and motorcycle configuration. Need Help Matching This 2023.5+ Harley Audio System? Garage Bagger Stereo can help verify Road Glide or Street Glide fitment, speaker impedance selection, amplifier matching, speaker and amplifier mounting, power and speaker wiring, and factory A2B signal integration before installation. Installation Services Request a Custom Build
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.
DS18 Motorcycle Audio Video
DS18 Harley Audio Video
Key Specifications
| Collection Name | DS18 Motorcycle Audio |
| Brand Focus | DS18 Motorcycle |
| Primary Use | Harley-Davidson and motorcycle audio upgrades |
| Core Product Types | Motorcycle speakers, motorcycle amplifiers, motorcycle radios, subwoofers, and audio accessories |
| Designed For | Motorcycle audio, touring and cruiser bikes, and high-performance sound systems |
| System Goal | Loud, clean, aggressive bagger audio with real fitment and highway-speed performance |
| Collection Depth | 30 products |
Always verify speaker size, mounting depth, amplifier placement, wiring path, impedance, and total system design before ordering parts for your Harley audio build.
Fresh DS18 Upgrades for Harley-Davidson Touring
DS18 is a strong fit for Harley-Davidson riders who want output that hits harder, projects farther, and stays present once the bike is moving. This collection includes motorcycle speakers, amplifiers, radios, subwoofers, and install-focused audio parts that support louder bagger systems where projection, power handling, and real-world performance matter.
If your goal is louder vocals, stronger front-stage attack, more amplifier-backed control, deeper bass support, or a more complete Harley Touring system, DS18 gives you aggressive upgrade paths that can be built around the way a motorcycle is actually used on the road.
High-Output Speakers That Cut Through Wind Noise
Harley bagger audio needs speakers that can project and stay controlled at speed. DS18 is a smart fit for riders who want sharper vocal presence, stronger projection, and more usable volume once the bike is actually moving.
Amplifier Power and Real System Flexibility
Strong speakers still need the right power behind them. DS18 amplifier options help support cleaner output, stronger control, and the headroom needed for Harley audio builds expected to stay loud and musical on the highway.
Best DS18 Upgrade Paths for Harley Riders
The right DS18 setup depends on the bike, the current system, and how aggressive the final build needs to be. Some riders need better front speakers. Others need amplifier power, radio upgrades, subwoofer support, or a more complete Harley audio system. This collection gives Harley riders a stronger place to start.
- DS18 motorcycle speakers for Harley baggers
- Motorcycle amplifiers for stronger Harley audio systems
- Motorcycle radios for upgrade-focused builds
- Subwoofers for bass-focused motorcycle systems
- Parts selected for real-world Harley Touring installation logic
- Products built for loud, clean motorcycle audio performance
Why DS18 Works So Well on Harley Baggers
Harley-Davidson audio systems are limited by wind noise, mounting space, vibration, and the need for parts that can actually work together. DS18 stands out because the brand supports louder, more aggressive system goals while still giving riders real motorcycle-focused options across speakers, amplifiers, radios, and bass products.
For riders chasing louder and cleaner sound on a touring bike, that matters. The right DS18 setup can give you better projection, stronger dynamics, and a more aggressive listening experience that actually works at road speed instead of just sounding good parked.
Why Buy DS18 from Garage Bagger Stereo?
Garage Bagger Stereo builds around what works in the real world. This DS18 collection is not just a brand page. It is a Harley-focused upgrade path built around products that support bagger audio installs with the right mix of projection, power, clarity, and installation practicality.
If you are trying to decide between speaker upgrades, amplifier power, radio upgrades, bass support, or a more complete DS18 Harley audio system, this collection gives you a stronger place to start and a better path to building the bike correctly the first time.
Need Help Deciding?
Speak now to one of our sales consultants or support team.