Browse Collections
-
SaleCicada Audio 14CXK65 Mid-Bass Component Speaker Kit (2Ω & 4Ω)
Vendor:Cicada AudioCicada Audio 14CXK65 6.5″ Mid-Bass Component Speaker Kit 2Ω & 4Ω FEATURES: Designed for 2014-2023 H-D® factory-designed locations Rain or Shine™ all-weather performance design OFC Copper shorting ring for extended high-frequency performance The Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high-temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor DiDie-castluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty SPECIFICATIONS: 4Ω – 6.5-inch mid-bass driver Power handling: 250W RMS/500W MAX Voice Coils: 2.0-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94dB, 1W / 1M response 70Hz – 20kHz +/- 3dB Mounting Depth: 2.64-inch/67mm Mounting Diameter: 5.67-inch/144mm 4Ω – 1.0-inch shallow ring radiator horn tweeter Power handling: 200W RMS/400W MAX Voice Coils: 1.0-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12dB-7kHz external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Magnet: Neodymium Sensitivity: 107dB, 1W / 1M response 2kHz – 20kHz +/- 3dB Mounting Depth: 0.75-inch/18mm Mounting Diameter: 2.0-inch/50mmSale -
SaleCicada Audio CM65X 6.5" Mid-Bass Component Speakers with CMC Cones (Pair)
Vendor:Cicada AudioCicada Audio CM65X 6.5-inch Mid-Bass Component Speakers with CMC™ Cones FEATURES Designed exclusively for 2014 to current H-D® factory designed locations Rain or Shine™ all weather performance design OFC Copper shorting ring for extended high frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty SPECIFICATIONS 4Ω / 6.5-inch mid-bass driver Power Handling: 250W RMS / 500W MAX Voice Coil: 2-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 10 kHz +/- 3 dB Mounting Depth: 2.3-inch/58mm Mounting Diameter: 5.7-inch/144mmSale -
SaleCicada Audio CM69X 6x9" Midrange Speakers 6x9" (Pair)
Vendor:Cicada AudioCicada Audio CM69X 6X9-inch Mid-Bass Component Speakers FEATURES Rain or Shine™ all weather performance design OFC Copper shorting ring for extended high frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty SPECIFICATIONS 2Ω / 6X9-inch mid-bass driver Power Handling: 250W RMS / 500W MAX Voice Coil: 2-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 10 kHz +/- 3 dB Mounting Depth: 3.26-inch/83mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mmSale -
SaleCicada Audio CM8X 8" Mid-Bass Component Speakers with CMC Cones (Pair)
Vendor:Cicada AudioCicada Audio CM8X 8" Mid-Bass Component Speakers with CMC™ Cones FEATURES Rain or Shine™ all weather performance design OFC Copper shorting ring for extended high frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty SPECIFICATIONS 2Ω – 8.0-inch mid-bass driver Power Handling: 250W RMS/500W MAX Voice Coils: 2.0-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 20 kHz +/- 3 dB Mounting Depth: 3.2-inch/81mm Mounting Diameter: 7.1-inch/180mm SPECIFICATIONS 4Ω – 8.0-inch mid-bass driver Power Handling: 250W RMS/500W MAX Voice Coils: 2.0-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 20 kHz +/- 3 dB Mounting Depth: 3.2-inch/81mm Mounting Diameter: 7.1-inch/180mmSale -
SaleCicada Audio CMB10.S4NEO 10" Pro Mid-Bass Driver w/ CMC™ & NEO Technology - 4Ω (Single)
Vendor:Cicada AudioCicada Audio® 10" CMB10.S4 Pro Mid-Bass Driver w/ CMC™ & NEO Technology Model: CMB10.S4NEO – For Harley-Davidson® & Motorcycle Audio Lightweight. Loud. Legendary. The Cicada Audio® CMB10.S4NEO is the ultimate 10-inch mid-bass driver engineered for Harley-Davidson® motorcycles and high-performance motorcycle audio systems. Featuring our cutting-edge Carbon Matrix Composite™ (CMC™) cone and ultra-efficient NEO motor technology, this speaker delivers powerful, distortion-free mid-bass while keeping weight minimal—perfect for riders who demand loud, clear sound at cruising speeds. Key Features: ✔ Motorcycle-Optimized – Designed specifically for Harley-Davidson® and custom motorcycle sound systems✔ NEO Motor Technology – High-output N42 neodymium magnetic structure for maximum efficiency with minimal weight✔ Carbon Matrix Composite™ (CMC™) Cone – Lightweight, ultra-rigid, and weather-resistant for crisp, powerful mid-bass✔ Rain or Shine™ All-Weather Performance – Built to withstand the elements✔ Proprietary Cicada Audio® “A” Basket Design – Die-cast aluminum with Vortex Flow Venting™ for superior heat dissipation and structural integrity✔ Black Coat™ OFC Copper Voice Coil – Ensures high conductivity, low resistance, and extreme thermal performance✔ Engineered in the U.S.A. – Designed by American audio experts for premium sound✔ Two-Year Warranty – Confidence in quality and durability Specifications: Power Handling: 500W RMS / 1000W MAX Voice Coil: 3-inch / 4Ω / 6-layer OFC Copper with Black Coat™ Magnet: N42 Neodymium Slug Basket: Heavy-duty die-cast aluminum with Vortex Flow Venting™ Cooling: Vented voice coil gap + advanced heat sink design for maximum heat dissipation Frequency Response: 35 Hz – 3 kHz ±5 dB Sensitivity: 90 dB (1W/1M) Total Diameter: 10.24” / 260 mm Mounting Depth: 4.5” / 115 mm Mounting Diameter: 8.98” / 228 mm Recommended Amplifiers: Pair the CMB10.S4NEO with one of these high-performance Cicada Audio® amplifiers for optimal results: FLX1600.1 – Mono Block Amplifier FLX1400.4 – 4-Channel Pro Amplifier (350W x 4) FLX1600.1 – Mono Subwoofer Amplifier (1600W) These amplifiers are a perfect match for the CMB10.S4NEO, delivering the clean, powerful output needed to make your 10s truly shine—whether you’re cruising the highway or parked at the show.Sale -
SaleCicada Audio CXK69 - 6X9-inch Mid-Bass 2 Way Component Speaker Kit (2Ω or 4Ω)
Vendor:Cicada AudioCicada Audio CXK69 (2Ω or 4Ω) 6X9-inch Mid-Bass 2-Way Component Speaker Kit Fits 6x9 lids for 14-23 Does not fit 23.5-24 HD Lids MID-BASS FEATURES Rain or Shine™ all-weather performance design OFC Copper shorting ring for extended high-frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high-temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die-cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty MID_BASS SPECIFICATIONS 2Ω / 6X9-inch mid-bass driver 4Ω / 6X9-inch mid-bass driver Power Handling: 250W RMS / 500W MAX Voice Coil: 2-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 10 kHz +/- 3 dB Mounting Depth: 3.26-inch/83mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm TWEETER FEATURES Rain or Shine™ all-weather performance design The aluminum tweeter dome diaphragm delivers brighter sound and maximized efficiency OFC Copper wire voice coil offers great sound while generating less heat Custom tooled, vented, encased external crossover Field replaceable diaphragm Aluminum die-cast custom tooled backplate N35SH Neodymium magnet motor Two (2) year warranty TWEETER SPECIFICATIONS 4Ω / 1-inch shallow ring radiator horn tweeter Power Handling: 50W RMS / 100W MAX Voice Coil: 1-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12 dB @ 7 kHz Magnet: Neodymium Sensitivity: 101 dB, 1W / 1M Frequency Response: 2 kHz – 20 kHz +/- 3 dB Mounting Depth: 1.1-inch/28mm Mounting Diameter: 2-inch/50.8mmSale -
SaleCicada Audio CXXM65 6.5" Mid-Bass Speakers | 2Ω or 4Ω – Pair
Vendor:Cicada AudioHIGH-OUTPUT 6.5-INCH MOTORCYCLE MID-BASS Cicada Audio CXXM65 6.5" Mid-Bass Speakers | 2Ω or 4Ω – Pair The Cicada Audio CXXM65 is a high-output 6.5-inch mid-bass speaker pair available in 2Ω and 4Ω versions for motorcycle audio systems. Each speaker combines a moisture-resistant Kevlar® cone, efficient neodymium motor, high-sensitivity design and shallow mounting depth for tight, responsive mid-bass in demanding open-air installations. Choose Impedance View Specifications Responsive Motorcycle Mid-Bass Available in 2Ω and 4Ω configurations Sold as a matched pair 100 watts RMS per speaker 200 watts maximum per speaker Lightweight Kevlar® cones N45H neodymium magnet motors Shallow 2.26-inch mounting depth 6.5-inch grilles and hardware included Rain or Shine™ all-weather construction Cicada CXXM65 Mid-Bass Speaker Overview The Cicada Audio CXXM65 is designed for motorcycle audio systems that need clean, punchy mid-bass without the depth and weight of a conventional automotive woofer. Its lightweight Kevlar® cone is engineered to remain rigid while resisting heat and moisture. Combined with an efficient neodymium motor and 92dB sensitivity, the CXXM65 delivers responsive mid-bass from a properly matched motorcycle amplifier. Select the CXXM65.2 2Ω version or the CXXM65.4 4Ω version based on your amplifier, speaker wiring and final channel impedance requirements. Available Impedance Options and SKUs CXXM65.2 — 2-Ohm Version Select the 2Ω version when your amplifier is stable at the intended 2-ohm channel load and the speaker wiring is designed for the lower impedance. CXXM65.4 — 4-Ohm Version Select the 4Ω version for amplifiers and multi-speaker configurations designed around a 4-ohm channel load. Choose the correct impedance: Your selection must match the amplifier’s rated load, the number of speakers connected to each channel and the final series or parallel wiring configuration. What Comes in the Box Two Cicada Audio CXXM65 6.5-inch mid-bass speakers Selected 2Ω or 4Ω speaker configuration Two protective 6.5-inch speaker grilles Speaker installation hardware Important: Motorcycle-specific speaker adapters, fairing brackets, saddlebag rings, wiring harnesses and amplifier installation components are not included unless specifically added as product options. Why Riders Choose the CXXM65 100W RMS Power Handling Each 6.5-inch speaker handles 100 watts RMS and 200 watts maximum for strong output from a properly matched motorcycle amplifier. 2Ω or 4Ω Variants Two impedance options allow the speakers to be matched to different amplifiers, channel loads and multi-speaker configurations. Kevlar Mid-Bass Cone The lightweight Kevlar® cone is strong, heat resistant and moisture resistant for tight, controlled mid-bass output. High-Sensitivity Design A 92dB sensitivity rating helps the CXXM65 produce clean output without requiring excessive amplifier power. Shallow Mounting Depth A 2.26-inch mounting depth supports motorcycle installations where available fairing, lower or saddlebag space is limited. All-Weather Construction Rain or Shine™ construction and UV-protected surfaces are engineered for exposed motorcycle audio environments. CXXM65 Speaker Technology Kevlar® cone provides a lightweight, rigid, high-temperature and moisture-resistant speaker diaphragm OFC copper voice coil supports efficient conductivity while helping reduce heat generation N45H neodymium motor produces strong output and high efficiency without unnecessary speaker weight Custom-tooled polycarbonate frame is engineered to withstand extreme heat in motorcycle installations UV-protected surfaces help prevent fading and damage from extended sun exposure Cicada CXXM65 Specifications Available Models CXXM65.2 and CXXM65.4 Speaker Size 6.5-inch mid-bass driver Quantity Pair Impedance Options 2Ω or 4Ω 2Ω Variant SKU CXXM65.2 4Ω Variant SKU CXXM65.4 Power Handling 100W RMS / 200W maximum per speaker Cone Material Kevlar® Magnet N45H neodymium Sensitivity 92dB, 1W / 1M Frequency Response 60Hz–5kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Grilles Included Warranty Two-year manufacturer warranty Fitment and Ordering Notes Fitment: The CXXM65 is designed for compatible custom 6.5-inch motorcycle speaker locations. Verify the speaker opening, mounting depth, grille clearance and amplifier impedance before ordering. Select CXXM65.2 for the 2Ω version. Select CXXM65.4 for the 4Ω version. Both variants are sold as a pair. Each speaker is rated for 100 watts RMS. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Verify the 2.26-inch mounting depth and 5.43-inch cutout before installation. Motorcycle-specific adapters or mounting brackets may be required. Apply the correct crossover and amplifier gain settings before extended use. Professional installation and system tuning are recommended. Best For High-output motorcycle fairing audio systems Custom 6.5-inch saddlebag speaker installations Motorcycle lower-fairing speaker locations Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker systems requiring a specific final channel impedance Riders wanting tighter mid-bass from a shallow speaker platform Related Motorcycle Audio Categories Cicada and Motorcycle Speakers Shop Cicada Audio Shop Motorcycle Speakers Motorcycle Speaker Installation Parts Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Lids Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada CXXM65 FAQ Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select CXXM65.2 for the 2Ω speaker pair or CXXM65.4 for the 4Ω speaker pair before adding the product to your cart. Are the CXXM65 speakers sold individually or as a pair? Both the CXXM65.2 and CXXM65.4 variants are sold as a pair. Which impedance should I choose? Choose the impedance supported by your amplifier and complete speaker wiring plan. The final channel load depends on the number of speakers connected and whether they are wired in series or parallel. How much power can the CXXM65 handle? Each speaker is rated for 100 watts RMS and 200 watts maximum power. Are these coaxial speakers? No. The CXXM65 is a dedicated 6.5-inch mid-bass speaker without an integrated tweeter. Are these subwoofers? No. The CXXM65 is a mid-bass speaker with a published frequency response of 60Hz–5kHz. It is not intended to replace a dedicated subwoofer. Are speaker grilles included? Yes. The pair includes two 6.5-inch protective grilles and installation hardware. Will these speakers fit factory Harley-Davidson locations? Fitment depends on the motorcycle year, speaker location, mounting opening, available depth and adapters being used. Model-specific brackets or mounting adapters may be required. Does this speaker pair need an amplifier? A properly matched motorcycle amplifier that is stable at the selected speaker impedance is recommended to take advantage of the speakers’ power handling and output capability. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for both CXXM65 impedance variants. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your motorcycle year, speaker locations, amplifier model and planned wiring. We’ll help determine which CXXM65 impedance is correct and recommend the proper mounting and installation components for your system. Call 864-334-6131 Ask GBS for HelpSale -
SaleCicada Audio CXXM8 8" Mid-Bass Speakers | 2Ω or 4Ω – Pair
Vendor:Cicada AudioHIGH-OUTPUT 8-INCH MOTORCYCLE MID-BASS Cicada Audio CXXM8 8" Mid-Bass Speakers | 2Ω or 4Ω – Pair The Cicada Audio CXXM8 is a high-output 8-inch mid-bass speaker pair available in 2Ω and 4Ω versions for custom motorcycle audio systems. Each speaker combines a moisture-resistant Kevlar® cone, efficient neodymium motor, high-sensitivity design and shallow mounting depth for tight, punchy mid-bass in demanding open-air installations. Choose Impedance View Specifications Powerful 8-Inch Mid-Bass Output Available in 2Ω and 4Ω configurations Sold as a matched pair 200 watts RMS per speaker 400 watts maximum per speaker Lightweight Kevlar® cones N45H neodymium magnet motors Shallow 2.7-inch mounting depth 8-inch grilles and hardware included Rain or Shine™ all-weather construction Cicada CXXM8 Mid-Bass Speaker Overview The Cicada Audio CXXM8 is designed for motorcycle audio systems that need stronger mid-bass impact without the mounting depth and weight of a conventional automotive woofer. Its lightweight Kevlar® cone is engineered to remain rigid while resisting heat and moisture. Combined with a high-efficiency neodymium motor and 93dB sensitivity, the CXXM8 produces clean, responsive mid-bass from available amplifier power. Select the CXXM8.2 2Ω version or the CXXM8.4 4Ω version based on your amplifier, speaker wiring and final channel impedance requirements. Available Impedance Options and SKUs CXXM8.2 — 2-Ohm Version Select the 2Ω version when your amplifier is stable at the intended 2-ohm channel load and your speaker wiring is designed for the lower impedance. CXXM8.4 — 4-Ohm Version Select the 4Ω version for amplifiers and multi-speaker system configurations designed around a 4-ohm channel load. Choose the correct impedance: Your selection must match the amplifier’s rated load, the number of speakers connected to each channel and the final series or parallel wiring configuration. What Comes in the Box Two Cicada Audio CXXM8 8-inch mid-bass speakers Selected 2Ω or 4Ω speaker configuration Two protective 8-inch speaker grilles Speaker installation hardware Important: Motorcycle-specific speaker adapters, saddlebag rings, lid kits, wiring harnesses and amplifier installation components are not included unless specifically added as product options. Why Riders Choose the CXXM8 200W RMS Power Handling Each 8-inch speaker handles 200 watts RMS and 400 watts maximum for strong output from a properly matched motorcycle amplifier. 2Ω or 4Ω Variants Two impedance options allow the speakers to be matched to different amplifiers, channel loads and multi-speaker configurations. Kevlar Mid-Bass Cone The lightweight Kevlar® cone is strong, heat resistant and moisture resistant for tight, controlled mid-bass output. High-Sensitivity Design A 93dB sensitivity rating helps the CXXM8 play loudly and cleanly without requiring excessive amplifier power. Shallow Mounting Depth A 2.7-inch mounting depth supports custom motorcycle installations where available space is limited. All-Weather Construction Rain or Shine™ construction and UV-protected surfaces are engineered for exposed motorcycle audio environments. CXXM8 Speaker Technology Kevlar® cone provides a lightweight, rigid, high-temperature and moisture-resistant speaker diaphragm OFC copper voice coil supports efficient conductivity while helping reduce heat generation N45H neodymium motor produces strong output and high efficiency without unnecessary speaker weight Custom-tooled polycarbonate frame is engineered to withstand extreme heat in motorcycle installations UV-protected surfaces help prevent fading and damage from extended sun exposure Cicada CXXM8 Specifications Available Models CXXM8.2 and CXXM8.4 Speaker Size 8-inch mid-bass driver Quantity Pair Impedance Options 2Ω or 4Ω 2Ω Variant SKU CXXM8.2 4Ω Variant SKU CXXM8.4 Power Handling 200W RMS / 400W maximum per speaker Cone Material Kevlar® Magnet N45H neodymium Sensitivity 93dB, 1W / 1M Frequency Response 50Hz–3kHz ±3dB Mounting Depth 2.7 inches / 69mm Mounting Diameter 7 inches / 177.4mm Grilles Included Warranty Two-year manufacturer warranty Fitment and Ordering Notes Fitment: The CXXM8 is designed for compatible custom 8-inch motorcycle speaker locations. Verify the speaker opening, mounting depth, grille clearance, enclosure requirements and amplifier impedance before ordering. Select CXXM8.2 for the 2Ω version. Select CXXM8.4 for the 4Ω version. Both variants are sold as a pair. Each speaker is rated for 200 watts RMS. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Verify the 2.7-inch mounting depth and 7-inch cutout before installation. Motorcycle-specific adapters or mounting rings may be required. Apply the correct crossover and amplifier gain settings before extended use. Professional installation and system tuning are recommended. Best For High-output motorcycle saddlebag audio systems Custom 8-inch speaker lid installations Motorcycle fairing and lower-fairing speaker locations Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker systems requiring a specific final channel impedance Riders wanting stronger, tighter mid-bass without a deep speaker basket Related Motorcycle Audio Categories Cicada and Motorcycle Speakers Shop Cicada Audio Shop Motorcycle Speakers Motorcycle Speaker Lids Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Installation Parts Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada CXXM8 FAQ Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select CXXM8.2 for the 2Ω speaker pair or CXXM8.4 for the 4Ω speaker pair before adding the product to your cart. Are the CXXM8 speakers sold individually or as a pair? Both the CXXM8.2 and CXXM8.4 variants are sold as a pair. Which impedance should I choose? Choose the impedance supported by your amplifier and complete speaker wiring plan. The final load depends on the number of speakers connected to each channel and whether they are wired in series or parallel. How much power can the CXXM8 handle? Each speaker is rated for 200 watts RMS and 400 watts maximum power. Are these subwoofers? No. The CXXM8 is an 8-inch mid-bass speaker with a published frequency response of 50Hz–3kHz. It is designed to deliver strong mid-bass rather than replace a dedicated subwoofer. Are speaker grilles included? Yes. The pair includes two 8-inch protective grilles and installation hardware. Will these speakers fit factory Harley-Davidson speaker locations? Fitment depends on the motorcycle year, speaker location, mounting opening, available depth and adapters being used. Custom rings, speaker lids or mounting adapters may be required. Does this speaker pair need an amplifier? A properly matched motorcycle amplifier that is stable at the selected speaker impedance is recommended to take advantage of the speakers’ power handling and output capability. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for both CXXM8 impedance variants. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your motorcycle year, speaker locations, amplifier model and planned wiring. We’ll help determine which CXXM8 impedance is correct and recommend the proper mounting and installation components for your system. Call 864-334-6131 Ask GBS for HelpSale -
SaleCicada Promo – Cicada CMB10.S4 10" Mid-Bass Pair + FREE 23.5+ Install Kit & Templates
Vendor:Cicada AudioGarage Bagger Stereo CICADA Promotion FREE 24HDRING10 + 24HDRINGT Cicada CMB10.S4 10" Mid-Bass Pair for 23.5+ Harley Touring Build a serious 10-inch saddlebag mid-bass system for the newest Harley-Davidson Touring platform with a pair of Cicada Audio CMB10.S4 Pro Mid-Bass speakers. Purchase the qualifying pair during the Garage Bagger Stereo September promotion and receive the matching Cicada 24HDRING10 saddlebag ring and grille kit plus the 24HDRINGT direct-fit template kit FREE. YOU BUY: 2 × CMB10.S4 10" Pro Mid-Bass Speakers FREE: 24HDRING10 10" Saddlebag Ring & Grille Kit FREE: 24HDRINGT Direct-Fit Template Kit FITMENT: 2023.5+ / 2024+ Harley-Davidson Touring September Promo Bundle 2 × Cicada CMB10.S4 10" Pro Mid-Bass Speakers 1 × Cicada 24HDRING10 Mounting Ring & Grille Kit — FREE 1 × Cicada 24HDRINGT Direct-Fit Template Kit — FREE Key Specifications Speaker Model Cicada Audio CMB10.S4 Quantity 2 Speakers Speaker Size 10 Inch Speaker Type Pro Mid-Bass Nominal Impedance 4Ω Each Power Handling 800W RMS / 1600W Max Each Frequency Response 35 Hz – 1.8 kHz ±3 dB Sensitivity 87.2 dB (1W/1M) Voice Coil 3" / 76 mm, 4Ω, 6-Layer Black Coat Magnet Y30 Ferrite Ceramic Basket Heavy-Duty Die-Cast Aluminum Total Diameter 10.2" / 259 mm Mounting Diameter 8.9" / 228 mm Mounting Depth 4.3" / 110 mm Fitment 2023.5+ / 2024+ Harley-Davidson Touring Installation Location Saddlebags What's Included 2 × Cicada CMB10.S4 10" Pro Mid-Bass Speakers High-output 4Ω 10-inch Pro Mid-Bass drivers rated at 800W RMS each and designed for high-performance motorcycle saddlebag audio systems. FREE Cicada 24HDRING10 Ring & Grille Kit A matched pair of precision-fit 10-inch saddlebag mounting rings and protective grilles engineered for 2024+ Harley-Davidson saddlebags. FREE Cicada 24HDRINGT Template Kit Direct-fit left and right saddlebag templates provide speaker cutout guides, port location guides and brace drilling/alignment points for the installation. 23.5+ Harley Touring Platform This version is designed around the 2023.5+/2024+ Harley-Davidson Touring saddlebag platform. CMB10.S4 Pro Mid-Bass 10-inch Pro Mid-Bass driver 4Ω single voice coil 800W RMS / 1600W maximum power handling per speaker Y30 ferrite ceramic magnet motor Heavy-duty die-cast aluminum basket 3-inch 6-layer Black Coat voice coil Vented voice-coil gap for improved thermal management 35 Hz – 1.8 kHz frequency response 87.2 dB sensitivity 4.3-inch mounting depth 24HDRING10 Saddlebag Ring & Grille Kit Designed for 2024+ Harley-Davidson saddlebags 10-inch Pro Mid-Bass mounting rings Protective speaker grilles Sold as a matched pair Designed for high-output saddlebag mid-bass installations Used with the 24HDRINGT template system 24HDRINGT Direct-Fit Template Kit Custom molded high-grade ABS templates Left and right 2024+ Harley saddlebag templates CMB10.S4 speaker cutout guides 24HDPORT3 port cutout guidelines Left and right saddlebag brace templates Brace drilling and alignment guides September Promotion BUY THE SPEAKERS — GET THE INSTALL KIT FREE.Purchase the qualifying pair of Cicada CMB10.S4 speakers and receive the Cicada 24HDRING10 mounting ring and grille kit and 24HDRINGT template kit FREE through the Garage Bagger Stereo September promotion. No Promo Code Required.The applicable promotion is applied automatically when the qualifying bundle requirements are met. You May Also Want Cicada Audio 24HDPORT3 3" Right-Angle Port Kit Add the Cicada 24HDPORT3 when building a ported 23.5+/2024+ Harley saddlebag configuration. The 24HDRINGT includes pre-marked guidelines for locating the port cutouts. View Cicada Audio 24HDPORT3 Port Kit Nagy's Customs 10" 23.5+/2024+ Harley Bag Seals For customers planning a sealed 10-inch saddlebag configuration on the newer Harley Touring platform, the Nagy's Customs 10-inch bag seals are another enclosure option. Important: These bag seals may require modification depending on the speaker, mounting ring, saddlebag and final installation configuration. View Nagy's Customs 10" 23.5+/2024+ Harley Bag Seals Installation Notes Custom Installation Required:This 10-inch saddlebag installation requires cutting and modification of the factory saddlebags. Professional installation is recommended. Amplifier Not Included:This promotion includes the speaker pair and listed installation components only. Amplifier, wiring, DSP, ports and other system components are not included unless specifically stated. Build Your 23.5+ Harley 10" Saddlebag Mid-Bass System The Cicada CMB10.S4 September package combines a pair of high-output 10-inch Pro Mid-Bass drivers with the matching 23.5+/2024+ saddlebag mounting and template hardware needed to start the installation correctly.Sale -
SaleCicada Promo – Cicada CMB10.S4NEO 10" Mid-Bass Pair + FREE 23.5+ Install Kit & Templates
Vendor:Cicada AudioGarage Bagger Stereo CICADA Promotion FREE 24HDRING10 + 24HDRINGT Cicada CMB10.S4NEO 10" Mid-Bass Pair for 23.5+ Harley Touring Step up to Cicada Audio's lightweight CMB10.S4NEO 10-inch Pro Mid-Bass drivers with Carbon Matrix Composite cone technology and an N42 neodymium motor for the newest Harley-Davidson Touring saddlebag platform. Purchase the qualifying pair during the Garage Bagger Stereo September promotion and receive the matching Cicada 24HDRING10 saddlebag ring and grille kit plus the 24HDRINGT direct-fit template kit FREE. YOU BUY: 2 × CMB10.S4NEO 10" Pro Mid-Bass Speakers FREE: 24HDRING10 10" Saddlebag Rings & Grilles FREE: 24HDRINGT Direct-Fit Template Kit FITMENT: 2023.5+ / 2024+ Harley-Davidson Touring September Promo Bundle 2 × Cicada CMB10.S4NEO 10" Pro Mid-Bass Drivers 1 × Cicada 24HDRING10 Ring & Grille Kit — FREE 1 × Cicada 24HDRINGT Template Kit — FREE Key Specifications Speaker Model Cicada Audio CMB10.S4NEO Quantity 2 Speakers Speaker Size 10 Inch Speaker Type Pro Mid-Bass Nominal Impedance 4Ω Each Power Handling 800W RMS / 1600W Max Each Frequency Response 35 Hz – 1.8 kHz ±3 dB Sensitivity 88 dB (1W/1M) Voice Coil 3" / 76 mm, 4Ω, 6-Layer OFC Copper with Black Coat Magnet N42 Neodymium Cone Carbon Matrix Composite (CMC) Basket Heavy-Duty Die-Cast Aluminum with Vortex Flow Venting Mounting Diameter 9" / 228 mm Mounting Depth 4.5" / 115 mm Fitment 2023.5+ / 2024+ Harley-Davidson Touring Installation Location Saddlebags What's Included 2 × Cicada CMB10.S4NEO 10" Pro Mid-Bass Drivers Lightweight high-output 4Ω 10-inch mid-bass drivers featuring Cicada's Carbon Matrix Composite cone and N42 neodymium motor technology. FREE Cicada 24HDRING10 Rings & Grilles Matched 10-inch saddlebag mounting rings and protective grilles engineered for the 2024+ Harley-Davidson Touring saddlebag platform. FREE Cicada 24HDRINGT Template Kit Direct-fit left and right saddlebag templates provide the speaker cutout guides, 24HDPORT3 port locations and brace drilling/alignment points. 23.5+ Harley Touring Platform The mounting and template system is designed around the newest Harley-Davidson Touring saddlebag architecture. CMB10.S4NEO Technology N42 Neodymium Motor High-output NEO motor technology reduces weight while providing the motor strength needed for serious motorcycle mid-bass output. Carbon Matrix Composite Cone Cicada's CMC cone combines low mass, rigidity and weather resistance for clean, powerful mid-bass performance. Vortex Flow Venting The heavy-duty die-cast aluminum basket incorporates Cicada's Vortex Flow Venting design to improve airflow and heat dissipation. Rain or Shine Performance Engineered for the environmental demands of high-performance motorcycle audio systems. 24HDRING10 Saddlebag Ring & Grille Kit Designed specifically for 2024+ Harley-Davidson saddlebags Matched pair of 10-inch Pro Mid-Bass mounting rings Protective speaker grilles Designed for high-output saddlebag mid-bass installations Used with the 24HDRINGT direct-fit template system 24HDRINGT Direct-Fit Template Kit Custom molded high-grade ABS templates Left and right 2024+ Harley saddlebag templates Pre-marked CMB10.S4NEO speaker cutout guides Pre-marked 24HDPORT3 port cutout guidelines Left and right saddlebag brace templates Brace drilling and alignment guides September Promotion BUY THE SPEAKERS — GET THE INSTALL KIT FREE.Purchase the qualifying pair of Cicada CMB10.S4NEO speakers and receive the Cicada 24HDRING10 mounting ring and grille kit and 24HDRINGT template kit FREE through the Garage Bagger Stereo September promotion. No Promo Code Required.The applicable promotion is applied automatically when the qualifying bundle requirements are met. You May Also Want Cicada Audio 24HDPORT3 3" Right-Angle Port Kit Add the Cicada 24HDPORT3 when building a ported 23.5+/2024+ Harley saddlebag configuration. The 24HDRINGT includes pre-marked guidelines for locating the port cutouts. View Cicada Audio 24HDPORT3 Port Kit Nagy's Customs 10" 23.5+/2024+ Harley Bag Seals For customers planning a sealed 10-inch saddlebag configuration, Nagy's Customs 10-inch bag seals are another enclosure option for the newer Harley Touring platform. Important: These bag seals may require modification depending on the speaker, mounting ring, saddlebag and final installation configuration. View Nagy's Customs 10" 23.5+/2024+ Harley Bag Seals Installation Notes Custom Installation Required:This 10-inch saddlebag installation requires cutting and modification of the factory saddlebags. Professional installation is recommended. Amplifier Not Included:This promotion includes the speaker pair and listed installation components only. Amplifier, wiring, DSP, ports and other system components are not included unless specifically stated. Build a Lightweight High-Output 23.5+ Harley 10" Saddlebag System The Cicada CMB10.S4NEO September package combines Cicada's premium lightweight NEO 10-inch mid-bass drivers with the matching 23.5+/2024+ saddlebag mounting and template hardware needed to start the installation correctly.Sale -
DB Drive Euphoria XPERT EX8NMB-CFV2 8" NEO Carbon Fiber Midbass
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. EXWNMB-CFV2 8" Carbon Fiber NEO Midbass The XPERT EX8NMB-CFv2 carbon fiber midbass driver features a redesigned single-ring N52 neodymium magnet and a proprietary aluminum die-cast basket, reducing its mounting depth for tighter installations. Features 2″ (51 mm) Voice Coil Neodymium M-Ring Magnet Assembly Optimized for High Output SQ Sound Systems Weather Resistant Carbon Fiber Cone with Rubber Surround Custom Aluminum Basket with Radial Venting Specifications Impedance: 3.6Ω + 3.6Ω Power Handling: 300 Watts Dynamic Wattage: 600 Watts Sensitivity (1w/1M): 93.2dB Resonant Frequency (fs): 57.62 Hz D.C. Voice Coil Resistance (Re): 3Ω Impedance: 3Ω Dimensions Overall Diameter: 8.29"/ 210.50 mm Cutout Diameter: 7.09"/ 180 mm Mounting Depth: 3.78"/ 96 mm -
DB Drive Euphoria XPERT EXM8N-CFV2 8″ NEO Carbon Fiber Midrange (single)
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. EXM8N-CFV2 8″ NEO Carbon Fiber Midrange Early on, we have been committed to innovation in all things involving car audio. Experience the passion through audio designed and engineered for that moment you want to raise the bar and set the mood. Features 8" Neo Carbon Fiber midrange 2.0" (51mm) Midrange Voice Coil Neodymium Ring Magnet Assembly IP65 Rated Weather Resistant Carbon Fiber Cone Die-cast aluminum Basket with Radial VentingSpecifications Power Handling AES: 300 Watts* Dynamic Wattage: 600 Watts Frequency Response: 50Hz - 13KHz Sensitivity (1w/1m): 99.8dB Impedance: 4Ω Dimensions Overall Diameter: 8.29"/ 210.50 mm Mounting Depth: 3.29"/ 83.50 mm Cutout Diameter: 7.09"/ 180 mm
