Browse Collections
-
Kicker Audio Kit for Harley Davidson (2014-2023)
Vendor:KickerKicker Audio Kit for Harley-Davidson (2014-2023) Add great sound to your 2014 - 2023 Harley-Davidson fairing with this complete audio lid kit. It’s a complete audio solution loaded with waterproof KICKER 6-1/2-inch Coaxial Speakers (2 Ohm) and pre-measured, terminated speaker harnesses. FEATURES: 100% plug-and-play installation Everything you need in one box 6-1/2" redesigned high-performance, weather-proof coaxial speakers (pair) Polypropylene woofer cones resist moisture Super-efficient, 20mm neo-titanium-dome tweeters, bridge-mounted Neodymium magnet structure reduces weight for superb bike balancing Extreme volume level for clear music reproduction through helmets Small-footprint, high-power amp with very low current draw Custom-fit mounting bracket for amp Coaxials - Max Recommended Amp Power (Peak/RMS): 120W/60W Redesigned Amp - RMS Power (watts/ch.) @14.4 Volts, 2 Ohms: 75x4 3-year warranty on parts -
2014-2023 Harley-Davidson 2-Speaker Plug and Play Audio System | DS18
Vendor:DS18 Motorcycle Audio2014–2023 ROAD GLIDE OR STREET GLIDE 2014–2023 Harley-Davidson 2-Speaker Plug-and-Play Audio System | DS18 Upgrade a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide with a complete two-speaker audio system built around a DS18 ION1600.4D amplifier, two high-output 6.5-inch hybrid speakers, factory-radio integration and the primary power, mounting and installation components required for the selected motorcycle. Select Road Glide or Street Glide before ordering so the system can be supplied with the correct fairing-specific amplifier mounting configuration. Two amplifier channels power the included speakers, while two channels remain available for a properly matched future rear-speaker upgrade. Check Motorcycle Fitment See Everything Included Complete Two-Speaker Audio System Road Glide and Street Glide options Compatible 2014–2023 Harley-Davidson Touring platform DS18 ION1600.4D four-channel Class-D amplifier Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers 4-ohm nominal impedance per speaker 150 watts RMS per included speaker Built-in 1-inch titanium compression drivers DS18 factory-radio plug-and-play harness 4-AWG amplifier power wiring Bike-specific amplifier mounting solution Two amplifier channels available for future expansion Complete 2-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package combines the amplifier, front fairing speakers, factory-radio signal interface, power wiring and motorcycle-specific mounting components required to build a complete two-speaker audio system in a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide. The included DS18 PRO-HY6.4MSL speakers combine a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. The hybrid design delivers the midrange projection and high-frequency output needed to overcome motorcycle, road and wind noise. The DS18 ION1600.4D provides four channels of full-range Class-D power. Two channels operate the included fairing speakers. The remaining two channels can support a compatible rear-speaker pair after the correct speakers, wiring, mounting hardware and amplifier setup are added. Plug-and-play clarification: The included RY-HARNESS.HD provides a plug-and-play connection to compatible factory Harley-Davidson radio wiring. The complete installation still requires amplifier power wiring, speaker mounting, secure amplifier mounting and proper gain and crossover setup. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible 2014–2023 sharknose-fairing motorcycle. This option must include the amplifier rack and front-speaker installation components configured for the Road Glide fairing. 2014–2023 Road Glide fairing configuration Road Glide-specific amplifier mounting solution Two front fairing speakers Factory-radio integration harness Street Glide Option Select Street Glide for a compatible 2014–2023 batwing-fairing motorcycle. This option must include the amplifier rack and front-speaker installation components configured for the Street Glide fairing. 2014–2023 Street Glide fairing configuration Street Glide-specific amplifier mounting solution Two front fairing speakers Factory-radio integration harness Confirm the motorcycle before ordering: Verify the model year, exact trim, Road Glide or Street Glide fairing, factory radio, factory amplifier configuration and any existing audio modifications. Everything Included in the Audio System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms and 800 watts RMS × 2 bridged at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers One pair of 6.5-inch shallow hybrid speakers with 4-ohm impedance, 150-watt RMS power handling and built-in 1-inch titanium compression drivers. DS18 RY-HARNESS.HD A factory-radio plug-and-play amplifier harness with four-channel RCA pre-output, oxygen-free copper wiring and water-resistant construction. NVS 4-AWG Amplifier Power Kit Heavy-gauge amplifier power and ground wiring with quick-disconnect hardware for cleaner installation, saddlebag removal and future servicing. Front-Speaker Installation Components Fairing-specific speaker spacers, mounting hardware and installation components are supplied according to the selected Road Glide or Street Glide configuration. Bike-Specific Amplifier Rack The selected motorcycle option includes a Road Glide- or Street Glide-specific amplifier mounting solution for a secure, vibration-resistant installation. Two-speaker system: Rear speakers, saddlebag speaker adapters, speaker lids, rear-speaker wiring and rear grilles are not included unless specifically added to the order. Speaker Impedance and Amplifier Channel Configuration Front-Left Speaker One PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated ION1600.4D amplifier channel. Front-Right Speaker The second PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Two Available Channels Two amplifier channels remain available for compatible future rear speakers after the required wiring and mounting components are installed. Included Speaker Count Two speakers / one pair Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Amplifier Output at 4Ω 240W RMS per channel Front-Left Channel One PRO-HY6.4MSL speaker at 4Ω Front-Right Channel One PRO-HY6.4MSL speaker at 4Ω Loaded Amplifier Channels Two Available Amplifier Channels Two Bridging Required No Output must be limited correctly: The ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The DS18 ION1600.4D is a compact full-range Class-D amplifier that provides substantial output from a motorcycle-friendly chassis. It can power the included two-speaker system while retaining two channels for a properly designed future expansion. 240W × 4 at 4Ω Published four-channel output for compatible 4-ohm speaker systems. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm speaker systems. 800W × 2 Bridged Published bridged output into compatible 4-ohm speaker loads. Four Full-Range Channels Two channels operate the included speakers while two remain available for future rear-speaker expansion. Compact Chassis The amplifier is designed to deliver high output from a compact installation footprint. System Setup Controls Gain and crossover controls allow the output to be configured for the included hybrid speakers. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 channels Output at 2Ω 400W RMS × 4 channels Bridged Output at 4Ω 800W RMS × 2 channels Minimum Stereo Impedance 2Ω per channel Minimum Bridged Impedance 4Ω System Configuration Two channels used and two channels available Built-In DSP No Power Wiring 4-AWG amplifier wiring required DS18 PRO-HY6.4MSL 6.5-Inch Hybrid Speakers Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. The two-way hybrid design provides both midrange and upper-frequency output from the front fairing speaker locations. 150W RMS Each included speaker is rated for 150 watts RMS and 300 watts maximum. 4-Ohm Impedance Each speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Hybrid Two-Way Design A built-in titanium compression driver supplies high-frequency output without a separately mounted tweeter. Shallow Mounting Depth The 2.82-inch mounting depth supports tighter motorcycle fairing installations. IP65 Rated Water-resistant construction helps protect the speakers in motorcycle and powersports environments. 140Hz High-Pass Reference DS18 publishes 140Hz as the recommended high-pass crossover reference for this speaker. Speaker Model DS18 PRO-HY6.4MSL Quantity Included Two speakers / one pair Nominal Size 6.5 inches / 165.1mm Nominal Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Sensitivity 93dB, 1W / 1m Frequency Response 100Hz–20kHz Recommended High-Pass Crossover 140Hz Speaker Design Two-way shallow hybrid loudspeaker Midrange Voice Coil 1.5 inches / 38.6mm Compression Driver 1-inch titanium diaphragm with neodymium magnet Cone Material Water-resistant treated paper Weather Rating IP65 Mounting Cutout 5.6 inches / 142mm Mounting Depth 2.82 inches / 72mm Protective Grille Included with each speaker Check fairing clearance: Pod modification, magnet-cap clearance work, additional speaker spacing or other installation adjustments may be required depending on the exact motorcycle and factory enclosure. Factory Harley-Davidson Radio Integration The DS18 RY-HARNESS.HD connects a compatible 2014–2023 factory Harley-Davidson radio system to the aftermarket amplifier without cutting the primary factory-radio signal wiring. OEM Plug-and-Play Connection Factory-style connections simplify amplifier signal integration. Four-Channel RCA Pre-Output Four RCA channels support the included four-channel amplifier and future rear-speaker expansion. OFC Wiring Oxygen-free copper conductors and noise-rejecting RCA connections support reliable signal transfer. Designed for compatible 2014–2023 Street Glide and Road Glide models Factory-radio plug-and-play connection Four-channel RCA pre-output Oxygen-free copper wiring Water-resistant harness construction No cutting of the primary factory-radio signal wiring Factory configuration matters: Motorcycles with a factory amplifier, CVO equipment, aftermarket radio or previous audio modifications may require additional signal-integration work. Power Wiring and Amplifier Mounting 4-AWG Amplifier Wiring The included NVS power kit provides the heavy-gauge power and ground wiring needed for the amplifier, along with quick-disconnect connections for serviceability. Road Glide or Street Glide Rack Road Glide and Street Glide fairings use different amplifier mounting layouts. The selected motorcycle option determines the mounting solution supplied with the kit. Disconnect the motorcycle battery before installation. Mount the amplifier securely with adequate airflow. Install the correct fuse protection near the battery connection. Protect wiring from steering movement, sharp edges and heat. Use clean, secure power and ground connections. Verify all rack and fairing hardware before final assembly. Inspect battery and charging-system condition before high-output use. Gain and Crossover Setup Correct setup is required because the ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Connect one included speaker to each of two amplifier channels. Do not bridge the amplifier channels for the included speakers. Configure the two active channels for high-pass operation. Use 140Hz as the published speaker high-pass reference. Adjust the final crossover for the fairing and intended output level. Set amplifier gain using measured clean output. Do not use the amplifier gain control as a volume control. Reduce output immediately if distortion or mechanical noise is heard. Verify speaker polarity before closing the fairing. Professional setup recommended: Incorrect gain or crossover settings can damage the included speakers even when the system initially appears to play normally. Future Rear-Speaker Expansion The two unused amplifier channels provide a direct path for a future rear-speaker upgrade. Rear expansion must be designed around compatible speaker impedance, RMS power handling, mounting depth, wiring and crossover requirements. Already Available in the System Two unused amplifier channels Four-channel factory-radio interface Independent amplifier channel controls 4-AWG amplifier power foundation Required for Rear Expansion Compatible rear speakers Saddlebag lids, adapters or speaker pods Rear-speaker wiring and connectors Correct impedance and RMS-power matching Final crossover and gain setup Rear equipment is not included: This remains a two-speaker audio system until compatible rear speakers, mounting components and wiring are purchased and installed. Complete System Specifications System Type Two-speaker plug-and-play motorcycle audio system Motorcycle Options Road Glide or Street Glide Vehicle Application Compatible 2014–2023 Harley-Davidson models Amplifier DS18 ION1600.4D four-channel Class-D amplifier Amplifier Output at 4Ω 240W RMS × 4 channels Included Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Loaded Amplifier Channels Two channels at 4Ω each Available Amplifier Channels Two Factory-Radio Interface DS18 RY-HARNESS.HD Power Wiring NVS 4-AWG amplifier power kit with quick disconnect Amplifier Mounting Road Glide- or Street Glide-specific mounting solution Built-In DSP No Rear Speakers Included No Shopify Option Choose Road Glide or Street Glide Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, exact model, fairing style, factory radio, factory amplifier and current speaker configuration before ordering. Select Road Glide or Street Glide before adding the kit to the cart. The package includes two front fairing speakers. Each included speaker has a nominal 4-ohm impedance. Two amplifier channels remain available for future expansion. The amplifier does not include built-in DSP. Factory-amplified motorcycles may require additional integration. Speaker pod modification or additional spacing may be required. Correct gain and high-pass crossover setup are required. Rear speakers and rear mounting components are not included. Professional installation and system setup are recommended. Best For 2014–2023 Harley-Davidson Road Glide audio upgrades 2014–2023 Harley-Davidson Street Glide audio upgrades Riders retaining a compatible factory Harley-Davidson radio High-output two-speaker fairing systems Riders planning to add saddlebag speakers later Four-channel systems designed for staged expansion Professional motorcycle audio installations Related Motorcycle Audio Categories Speakers and Amplifiers Shop Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Parts Signal and Electrical Support Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Plan a Complete Motorcycle Audio System Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries DS18 2-Speaker Plug-and-Play Audio System FAQ How many speakers are included? The system includes two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers for the front fairing. What impedance are the included speakers? Each included speaker has a nominal impedance of 4 ohms. How much power can each speaker handle? Each PRO-HY6.4MSL is rated for 150 watts RMS and 300 watts maximum. How much power does the amplifier produce at 4 ohms? The ION1600.4D is rated for up to 240 watts RMS on each of its four channels at 4 ohms. Is the amplifier too powerful for the speakers? The amplifier can produce more continuous power than each speaker is rated to handle. It can be used safely when gain, high-pass crossover and maximum clean output are configured correctly. Are all four amplifier channels used? No. The supplied two-speaker system uses two channels. Two additional channels remain available for a compatible future rear-speaker pair. Does the system work with the factory Harley-Davidson radio? The included RY-HARNESS.HD is designed to integrate an aftermarket amplifier with compatible 2014–2023 Harley-Davidson factory radios. Does the factory radio wiring need to be cut? The compatible factory-radio signal connection uses a plug-and-play harness and does not require cutting the primary factory signal wiring. Does the amplifier include DSP? No. The ION1600.4D provides conventional gain and crossover controls but does not include digital signal processing. Are the speakers weather resistant? Yes. The speakers are IP65 rated and use a water-resistant treated paper cone. They should not be described as submersible. Can rear speakers be added later? Yes. The two available amplifier channels can power a properly matched rear-speaker pair after the required speakers, mounting hardware, wiring and system setup are added. Is the Road Glide amplifier rack the same as the Street Glide rack? No. Road Glide and Street Glide fairings require different amplifier mounting configurations. Select the correct motorcycle option before ordering. Will the speakers fit without modification? Fitment depends on the exact fairing enclosure and existing equipment. Speaker pod modification, additional spacing or other clearance work may be required. Are saddlebag speakers included? No. This is a two-speaker audio system. Rear speakers, saddlebag mounting components and rear-speaker wiring must be purchased separately. Need Help Matching This 2-Speaker Harley Audio System? Garage Bagger Stereo can help verify Road Glide or Street Glide fitment, speaker impedance selection, amplifier matching, fairing and amplifier mounting, power and speaker wiring, and factory-radio signal integration before installation. Installation Services Request a Custom Build -
Sale2014–2023 Harley-Davidson Plug-and-Play 2-Speaker Audio Kit | DB Drive / SounDigital
Vendor:SounDigital EVO62014–2023 HARLEY PLUG-AND-PLAY AUDIO 2014–2023 Harley-Davidson Plug-and-Play 2-Speaker Audio Kit Radio Flash Kit Included for Stock Radio Upgrade a Harley-Davidson Road Glide or Street Glide with DB Drive Euphoria XPERT 6.5-inch loudspeakers, a compact SounDigital 800.4 EVO6 amplifier and the installation components required for your selected motorcycle and radio. Choose your motorcycle model and either stock Harley radio or aftermarket radio integration directly from the product options. View Kit Options Verify Fitment Complete Two-Speaker Upgrade Fits 2014–2023 Harley Touring motorcycles Street Glide and Road Glide options Stock and aftermarket radio options DB Drive XPERT 6.5-inch speakers SounDigital 800.4 EVO6 amplifier Bike-specific Cicada amplifier rack 8-gauge OFC amplifier wiring kit 6.5-inch Harley speaker spacer rings Required speaker plug connections No dealer radio flash with stock-radio kit Choose Your Motorcycle and Radio This product uses two Shopify options. Select the correct motorcycle model first, followed by the radio currently installed in the bike. Motorcycle Model 2014–2023 Street Glide 2015–2023 Road Glide Your motorcycle selection determines which Cicada Audio amplifier rack is included. Radio Type Stock Harley Radio Aftermarket Radio Your radio selection determines which signal-integration components are included with the kit. Stock Harley Radio: No Dealer Flash Required The stock-radio version includes the Cicada Audio HDTSLINKAR-B factory radio T-harness with Maestro AR integration. This included integration package handles the factory-radio setup required for the audio upgrade. The customer does not need to take the motorcycle to a Harley-Davidson dealer to have the stock radio flashed for this kit. No dealer flash: Select the Stock Harley Radio option to receive the Cicada HDTSLINKAR-B and Maestro AR integration package. DB Drive Euphoria XPERT 6.5-Inch Loudspeakers The included EX6NCD-CFV2 loudspeakers combine a weather-resistant carbon fiber cone with a rear-mounted full-size compression driver for strong output and clear high-frequency performance on a motorcycle. High-Output Design Built around a neodymium M-ring magnet assembly and a two-inch voice coil for high-output motorcycle audio systems. Compression Driver A rear-mounted compression driver and wide-dispersion waveguide provide clear high-frequency output. Carbon Fiber Construction Weather-resistant carbon fiber cones and custom aluminum baskets are designed for demanding powersports installations. Speaker Model DB Drive Euphoria XPERT EX6NCD-CFV2 Speaker Size 6.5 inches Configuration Two-way loudspeaker with rear-mounted compression driver Power Handling 400 watts Dynamic Power 800 watts Impedance 3 ohms Sensitivity 106.1 dB at 1 watt / 1 meter Mounting Depth 3.44 inches Protective Grilles Included Quantity One matched pair SounDigital 800.4 EVO6 Amplifier The SounDigital 800.4 EVO6 delivers 800 watts RMS across four channels from a compact amplifier chassis designed for installations where mounting space is limited. 800 Watts RMS Four-channel output provides the power and system flexibility required for a high-output motorcycle audio build. Compact Footprint Its compact EVO6 chassis is well suited for installation on the included motorcycle-specific amplifier rack. Four-Channel Platform The four-channel design provides a strong foundation for the included fairing-speaker system and future system planning. What Is Included With Every Kit SounDigital Amplifier One SounDigital 800.4 EVO6 800-watt four-channel amplifier. DB Drive Speakers One pair of DB Drive Euphoria XPERT EX6NCD-CFV2 6.5-inch two-way loudspeakers. Amplifier Wiring Kit One Cicada Audio HDPG8K eight-gauge OFC amplifier installation kit. Speaker Spacer Rings One pair of DS18 6.5-inch Harley-Davidson speaker spacer rings. Bike-Specific Amplifier Rack The correct Cicada Audio amplifier rack for the selected Road Glide or Street Glide. Required Plug Connections The speaker plug connections required for the selected radio configuration. Radio-Specific Components Stock Harley Radio Includes the Cicada Audio HDTSLINKAR-B factory-radio T-harness and Maestro AR integration. No Harley-Davidson dealer radio flash is required with this configuration. Aftermarket Radio Includes the required speaker plug connections and two RCA audio cables for integration with a compatible aftermarket radio. Harley-Davidson Fitment Street Glide Select Street Glide to receive the Cicada Audio 14HDAR-SG amplifier rack. Road Glide Select Road Glide to receive the Cicada Audio 14HDAR-RG amplifier rack. Fitment range: This kit is intended for compatible 2014–2023 Street Glide and 2015–2023 Road Glide motorcycles. It is not designed for 2023.5+ CVO or 2024+ Harley Touring A2B audio systems. Installation and Ordering Notes Select the correct Road Glide or Street Glide amplifier rack. Select stock Harley radio or aftermarket radio integration. Confirm that the motorcycle is within the listed model-year range. Verify that the fairing accepts the included 6.5-inch speakers and spacer rings. Disconnect the motorcycle battery before installation. Mount the amplifier securely on the included bike-specific rack. Set amplifier gain and crossover controls after the system is installed. Test radio controls, balance and speaker operation before reinstalling the fairing. Related Motorcycle Audio Categories Shop Audio Components Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Parts Complete the System Motorcycle DSP and Signal Integration Cicada Audio Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries 2014–2023 Harley 2-Speaker Kit FAQ What motorcycles does this audio kit fit? It is offered for compatible 2014–2023 Street Glide and 2015–2023 Road Glide motorcycles. Select the correct model so the proper amplifier rack is included. Can I use this kit with the stock Harley radio? Yes. Select Stock Harley Radio to receive the Cicada Audio HDTSLINKAR-B and Maestro AR integration package. Does the stock radio need to be flashed by a Harley dealer? No. The stock-radio version includes the Cicada harness and Maestro AR integration required for this kit, so a separate dealer flash is not required. Can I use the kit with an aftermarket radio? Yes. Select Aftermarket Radio and the kit will include the appropriate plug connections and RCA cables instead of the factory-radio integration harness. What changes between Road Glide and Street Glide versions? The primary motorcycle-specific change is the amplifier rack. The Street Glide receives the 14HDAR-SG rack, while the Road Glide receives the 14HDAR-RG rack. How many speakers are included? The kit includes one pair of DB Drive Euphoria XPERT EX6NCD-CFV2 6.5-inch loudspeakers for the front fairing. Is the amplifier included? Yes. Every version includes one SounDigital 800.4 EVO6 four-channel amplifier. Does this fit 2024 and newer Harley Touring motorcycles? No. Newer A2B-equipped Harley Touring motorcycles require a different radio interface and installation package. Need Help Selecting the Correct Kit? Garage Bagger Stereo can help verify your motorcycle model, radio type, amplifier rack, speaker fitment, impedance matching, mounting and factory or aftermarket signal integration before installation. Installation Services Request a Custom BuildSale -
2014–2023 Harley Touring Plug & Play Audio Bundle - CXX65 + Amp Choice
Vendor:Cicada Audio2014–2023 Harley Touring Plug & Play Audio Bundle built for riders who want real highway volume and a clean install without piecing a system together. This bundle includes Cicada Audio CXX65 6.5" coaxial speakers plus your choice of a plug and play 4-channel amplifier so you can match output to your riding style and budget. Shop All 2014–2023 Plug and Play Kits Amplifier Installation Parts Speaker Installation Parts Choose your amplifier option below based on how loud you want to ride and how much headroom you want at speed. What’s Included Cicada Audio CXX65 6.5" Coaxial Speakers Plug and Play 4-Channel Amplifier Option (choose one): DS18 ION1600.4 or Cicada FLX1000 Built for 2014–2023 Harley touring bikes with plug and play focused integration Why This Bundle Works on 2014–2023 Harley Touring Bikes This bundle is built around the two things that matter most on baggers: speaker clarity and clean power. The CXX65 speakers provide a strong front-stage upgrade, and adding a dedicated 4-channel amplifier gives you the headroom needed for louder volume and cleaner sound at highway speed. With plug and play amplifier options, you get a cleaner install and more consistent results without guessing what works. Choose Your Plug and Play Amplifier Option DS18 ION1600.4 (Plug and Play Option) Built for riders who want strong output and loud, clean performance. Great for higher volume systems that need more power on tap. View DS18 ION1600.4 Amplifier Cicada Audio FLX1000 (Plug and Play Option) Clean power with strong clarity and an easy install. A great balance of output and sound quality for touring systems. View Cicada Audio FLX1000 Amplifier Speaker Details The Cicada Audio CXX65 speakers are a high-performance 6.5" coaxial upgrade designed to deliver better clarity and stronger volume than stock. When amplified, they provide a major improvement in detail and output at highway speeds. View Cicada Audio CXX65 Speakers Recommended Add-Ons for Best Results For the cleanest install and best performance, most builds pair this bundle with the correct install parts: Amplifier Installation Parts Speaker Installation Parts Specifications & Links Product Links Cicada Audio CXX65 Speakers DS18 ION1600.4D Amplifier Cicada Audio FLX1000 Amplifier If you need help choosing the right amplifier option for your speaker goals and riding style, Garage Bagger Stereo can help you dial in the best setup. Fitment Designed for 2014–2023 Harley Davidson touring motorcycles. If you have questions about your exact model or factory audio configuration, Garage Bagger Stereo can help confirm the right configuration before you order. Shop the Bundle Select your amplifier option and upgrade your 2014–2023 Harley touring audio with a plug and play bundle designed for louder volume, cleaner sound, and a cleaner install. -
SaleDiamond Audio Stage II Plug-N-Play Kit 2014-23 Harley Davidson
Vendor:Diamond AudioDiamond Audio Plug & Play Bundle Fits 2014-2023 Harley Davidson Baggers Upgrade your Harley Davidson’s audio system with the Diamond Audio Stage II Kit, designed for seamless integration and superior sound performance. This plug-and-play kit delivers powerful, high-quality audio, ensuring an unmatched riding experience with crystal-clear sound at any speed. Kit Details Diamond Audio MP654 Pro Coax 6.5” (2Ω) Speakers: High-performance speakers engineered to cut through wind and road noise. Diamond Audio DXM800.4 Marine Amplifier: A weather-resistant, high-efficiency amplifier built to handle extreme riding conditions while delivering clear, distortion-free power. Plug & Play Amplifier T-Harness: Simplifies installation with pre-configured connections for a hassle-free setup. Eight-Gauge Power and Ground Kit: Provides stable power delivery to support optimal amplifier performance. Batwing Universal Amplifier Rack & Shark Nose XEL Amp Rack: Secure mounting solutions designed to keep your amp stable and minimize vibrations on the road. Stock Pods on a 15-23 Road Glide will need modifications Diamond Audio’s Commitment to Excellence Diamond Audio has spent over 30 years developing top tier products to offer customers superior sound quality. These innovative amplifiers made with unmatched features utilize cutting-edge technology to prioritize perfection in performance, durability, and reliability. Diamond Audio full-range speakers offer powerful, distortion-free sound, no matter the road conditions. Designed for Harley Davidson Stereo Systems Precision-crafted to fit Harley Davidson motorcycle audio systems, this bundle is made to accommodate factory radios from 2014-2023 Harley models. Whether you're upgrading your Bagger’s audio for long highway rides or enhancing overall sound clarity, integrating a Diamond Audio amp offers a straightforward installation and an unmatched riding experience. Key Features This plug-and-play kit includes all the materials you need to set up a Diamond Audio amplifier with your Bagger. Complete with a DXM800.4 Marine Amplifier and the additional motor components needed for a high-end Harley radio setup, Garage Bagger Stereo's Diamond Audio Stage II 2014-2023 Harley Davidson baggers kit provides the ultimate convenience for Baggers. Enjoy unparalleled clarity, volume, and power on the road.Sale -
Sale2014–2023 Harley Touring Plug & Play Audio Bundle - CHX65 + Amp Choice
Vendor:Cicada Audio2014–2023 Harley Touring Plug & Play Audio Bundle built for riders who want real highway volume and a clean install without piecing a system together. This bundle includes Cicada Audio CHX65 6.5" Pro Coaxial Speakers plus your choice of a plug and play 4-channel amplifier so you can match output to your riding style and budget. Shop All 2014–2023 Plug and Play Kits Amplifier Installation Parts Speaker Installation Parts Choose your amplifier option below based on how loud you want to ride and how much headroom you want at speed. What’s Included Cicada Audio CHX65 6.5" Pro Coaxial Speakers Plug and Play 4-Channel Amplifier Option (choose one): DS18 ION1600.4D or Cicada FLX1000 Built for 2014–2023 Harley touring bikes with plug and play focused integration Why This Bundle Works on 2014–2023 Harley Touring Bikes This bundle is built for riders who want higher output and clean clarity at speed. The CHX65 Pro Coax speakers are designed for stronger projection and volume, and the 4-channel amplifier option gives you the power and headroom needed to keep the system clean when you turn it up. Plug and play amplifier options keep the install cleaner and reduce guesswork so you get consistent results. Choose Your Plug and Play Amplifier Option DS18 ION1600.4D (Plug and Play Option) Built for riders who want strong output and loud, clean performance. Great for higher volume systems that need more power on tap. View DS18 ION1600.4D Amplifier Cicada Audio FLX1000 (Plug and Play Option) Clean power with strong clarity and an easy install. A great balance of output and sound quality for touring systems. View Cicada Audio FLX1000 Amplifier Speaker Details The Cicada Audio CHX65 speakers are a high-output 6.5" pro coaxial upgrade designed for louder, clearer sound on baggers. When amplified, they deliver stronger projection and the volume needed for real highway riding. View Cicada Audio CHX65 Pro Coaxial Speakers Recommended Add-Ons for Best Results For the cleanest install and best performance, most builds pair this bundle with the correct install parts: Amplifier Installation Parts Speaker Installation Parts Product Links Included + Options Cicada Audio CHX65 Pro Coaxial Speakers DS18 ION1600.4D Amplifier Cicada Audio FLX1000 Amplifier If you need help choosing the right amplifier option for your speaker goals and riding style, Garage Bagger Stereo can help you dial in the best setup. Fitment Designed for 2014–2023 Harley Davidson touring motorcycles. If you have questions about your exact model or factory audio configuration, Garage Bagger Stereo can help confirm the right configuration before you order. Shop the Bundle Select your amplifier option and upgrade your 2014–2023 Harley touring audio with a plug and play bundle designed for louder volume, cleaner sound, and a cleaner install.Sale -
2014-2023 Harley-Davidson Road & Street Glide 4-Speaker Audio System | DS18 / Cerwin-Vega
Vendor:DS18 Motorcycle Audio2014-2023 HARLEY-DAVIDSON FOUR-SPEAKER SYSTEM Road Glide & Street Glide Plug-and-Play Audio System Upgrade a compatible 2014-2023 Harley-Davidson Road Glide or Street Glide with a complete four-speaker package built around DS18 amplifier power, hybrid front speakers and Cerwin-Vega 6×9 saddlebag speakers. The factory-radio signal connection is handled through a DS18 plug-and-play harness. Select the correct motorcycle before ordering so the package can be configured with the proper fairing-specific amplifier mounting solution. Check Fitment See Everything Included Complete Front and Rear Audio Upgrade Road Glide and Street Glide options Designed for compatible 2014-2023 Harley Touring models DS18 ION1600.4D four-channel amplifier 240 watts RMS × 4 channels at 4 ohms Two DS18 PRO-HY6.4MSL front speakers Two Cerwin-Vega ST69CX 6×9 rear speakers Four 4-ohm speaker channels Factory Harley radio integration harness 4-AWG amplifier power wiring Cut-in saddlebag lid installation system Complete Harley Audio System Overview This Garage Bagger Stereo package combines the front fairing speakers, rear saddlebag speakers, four-channel amplifier, factory-radio interface, power wiring and motorcycle-specific mounting components required for a complete 2014-2023 Harley-Davidson Touring audio upgrade. Two DS18 PRO-HY6.4MSL hybrid loudspeakers upgrade the front fairing locations. Each speaker combines a 6.5-inch midrange driver with an integrated titanium compression driver to produce strong vocal clarity and high-frequency projection in open-air riding conditions. The Cerwin-Vega cut-in lid system adds two ST69CX 6×9 speakers to the factory saddlebag lids. All four speakers connect to individual channels of the DS18 ION1600.4D amplifier. Important installation distinction: The factory-radio interface is plug-and-play, but the rear-speaker installation is not cutting-free. Both compatible factory saddlebag lids must be permanently cut using the supplied templates. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible 2014-2023 sharknose-fairing motorcycle. The package must include the amplifier mounting solution configured for the Road Glide fairing. Street Glide Option Select Street Glide for a compatible 2014-2023 batwing-fairing motorcycle. The package must include the amplifier mounting solution configured for the Street Glide fairing. Factory-radio application: The included DS18 RY-HARNESS.HD is designed around compatible factory Harley-Davidson radio integration. Aftermarket-radio installations may require a different signal and remote-turn-on configuration. Confirm the motorcycle year and exact model. Select Road Glide or Street Glide before adding the kit to the cart. Confirm that the motorcycle retains a compatible factory radio. Identify any factory amplifier or CVO audio equipment before ordering. Verify that the motorcycle has compatible factory saddlebag lids. Everything Included in the System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers Two 6.5-inch 4-ohm hybrid loudspeakers with built-in 1-inch titanium compression drivers for the front fairing. DS18 RY-HARNESS.HD Factory-radio plug-and-play interface with four-channel RCA outputs, integrated high-to-low conversion, OFC wiring and amplifier remote turn-on. 4-AWG Amplifier Power Kit Heavy-gauge amplifier power and ground wiring with the protection and installation hardware configured for the package. Bike-Specific Amplifier Mounting The package is configured with a Road Glide or Street Glide mounting solution according to the motorcycle selected at checkout. Cerwin-Vega 6×9 Lid Kit One pair of 4-ohm ST69CX 6×9 speakers with cut-in lid grilles, left and right templates, half-inch spacers and speaker wiring. Confirm current package contents: Product substitutions or mounting-hardware changes should be reflected in the Shopify variant and fulfillment notes before the order is released. Speaker Impedance and Amplifier Channel Configuration Front Fairing Channels Each DS18 PRO-HY6.4MSL front speaker presents a nominal 4-ohm load to its assigned amplifier channel. Rear Saddlebag Channels Each Cerwin-Vega ST69CX rear speaker presents a nominal 4-ohm load to its assigned amplifier channel. Channel 1 Front-left PRO-HY6.4MSL — 4Ω Channel 2 Front-right PRO-HY6.4MSL — 4Ω Channel 3 Rear-left ST69CX — 4Ω Channel 4 Rear-right ST69CX — 4Ω Amplifier Output at 4Ω 240 watts RMS per channel Front Speaker Rating 150 watts RMS per speaker Rear Speaker Rating 125 watts RMS per speaker Unused Amplifier Channels None Output must be limited: The ION1600.4D can produce more continuous power at 4 ohms than either included speaker model is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The ION1600.4D is a compact full-range Class-D amplifier with high-level and RCA inputs, adjustable filtering, a cooling fan and power, protection and clipping indicators. 240W × 4 at 4Ω Published output for the four included 4-ohm speaker channels. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm systems. 800W × 2 Bridged Published bridged output into compatible 4-ohm loads. Adjustable Crossovers Selectable low-pass, high-pass and full-range operating modes. Clip Indicator Visual clipping indication assists with measured gain setup. Compact Motorcycle Installation Small chassis with vibration-resistant surface-mount construction. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 Output at 2Ω 400W RMS × 4 Bridged Output at 4Ω 800W RMS × 2 Frequency Response 10Hz–20kHz Signal-to-Noise Ratio Greater than 95dB Input Range 0.2–6V Crossover Modes LPF / HPF / FULL Crossover Range 40Hz–2kHz Minimum Impedance 2Ω stereo / 4Ω bridged Power Input 4-AWG Published External Fuse 140A Cooling Fan Yes Dimensions 7.32 × 4.72 × 2 inches / 186 × 120 × 52mm DS18 PRO-HY6.4MSL Front Fairing Speakers The PRO-HY6.4MSL combines a slim 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. This hybrid construction provides midrange and high-frequency output from one compact speaker. Speaker Model PRO-HY6.4MSL Quantity Two speakers Nominal Size 6.5 inches Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Frequency Response 100Hz–20kHz Sensitivity 97dB Compression Driver 1-inch titanium diaphragm Speaker Cone Water-resistant treated paper Weather Rating IP65 Mounting Depth 2.82 inches / 72mm Check fairing clearance: Speaker pod modification, spacing or other installation adjustments may be required depending on the motorcycle model, factory enclosure and existing components. Cerwin-Vega ST69CX 6×9 Saddlebag Speakers The rear system uses one pair of Cerwin-Vega ST69CX 4-ohm 6×9 coaxial speakers. The cut-in kit converts compatible factory saddlebag lids into rear speaker locations without requiring replacement painted lids. Speaker Model Cerwin-Vega ST69CX Quantity Two speakers / one pair Speaker Size 6×9 inches Speaker Design Two-way high-output coaxial speaker Impedance 4Ω per speaker Power Handling 125W RMS / 250W maximum per speaker Tweeter Titanium dome Sensitivity 93.5dB Mounting Depth 3.875 inches Included Lid Components Grilles, templates, half-inch spacers and speaker wiring Water-resistant, not waterproof: Protect the speakers from direct heavy water exposure and follow the manufacturer’s care instructions. Factory Radio Integration The DS18 RY-HARNESS.HD connects to compatible 2014-2023 Harley-Davidson factory-radio wiring and supplies the low-level signal and remote turn-on needed for aftermarket amplifier integration. Four RCA Outputs Provides four low-level channels for the four-channel amplifier. Integrated Conversion Built-in load resistors and high-to-low conversion condition the factory signal. Remote Turn-On Supplies amplifier activation when the compatible factory radio turns on. Factory harness connection without cutting the radio signal wiring Four-channel RCA pre-output Oxygen-free copper wiring Noise-rejecting RCA construction Water-resistant harness construction Compatible factory-radio applications only Saddlebag Lid Installation The supplied cut-in kit uses model-specific left and right templates to create the 6×9 speaker openings in compatible factory saddlebag lids. The grilles and half-inch spacer rings complete the visible installation. Remove and inspect both saddlebag lids before cutting. Confirm template orientation for the left and right lids. Check speaker depth and electrical-lock clearance. Confirm hinge, tether and weather-seal clearance. Route the rear-speaker wiring before final assembly. Seal and protect all cut edges after modification. Test speaker polarity before reinstalling the lids. Permanent modification: Cutting the factory saddlebag lids is irreversible. Professional installation is recommended when the installer is not experienced with Harley-Davidson lid conversions. Amplifier Setup and Speaker Protection The amplifier has significantly more available power at 4 ohms than the included front and rear speakers are rated to handle continuously. Measured setup is essential to prevent damage. Connect one speaker to each amplifier channel. Set the amplifier channels to high-pass operation. Set separate front and rear gains when the amplifier layout permits. Use measured clean voltage rather than setting gain by ear. Do not use the amplifier gain control as a volume control. Watch the clipping indicator during setup. Reduce output immediately if distortion or mechanical noise is heard. Confirm the correct external fuse near the battery. Evaluate battery and charging-system condition before high-output use. Complete System Specifications Vehicle Application Compatible 2014-2023 Harley-Davidson Road Glide or Street Glide Motorcycle Options Road Glide or Street Glide Radio Application Compatible factory Harley-Davidson radio Amplifier DS18 ION1600.4D Amplifier Output 240W RMS × 4 at 4Ω Front Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Rear Speakers Two Cerwin-Vega ST69CX 6×9 coaxial speakers Speaker Impedance 4Ω per speaker Loaded Amplifier Channels All four channels at 4Ω each Factory Radio Harness DS18 RY-HARNESS.HD Power Wiring 4-AWG amplifier installation kit Amplifier Mounting Bike-specific Road Glide or Street Glide mounting solution Rear Mounting Cerwin-Vega 6×9 cut-in saddlebag lid system Saddlebag Cutting Required Yes Built-In DSP No Fitment and Ordering Notes Submit the complete motorcycle information: Confirm the year, exact model, Road Glide or Street Glide fairing, factory radio, factory amplifier configuration and current speaker locations. Select Road Glide or Street Glide before ordering. The included radio harness is intended for compatible factory radios. Two front and two rear speakers are included. All four included speakers are 4 ohms. All four amplifier channels are used. The amplifier does not include built-in DSP. Front speaker pod modification or spacing may be required. Both factory saddlebag lids require permanent cutting. Correct amplifier gain and crossover setup are required. Professional installation is strongly recommended. Best For 2014-2023 Harley-Davidson Road Glide audio upgrades 2014-2023 Harley-Davidson Street Glide audio upgrades Riders keeping a compatible factory Harley radio Four-speaker front-and-rear audio systems Motorcycles using factory saddlebag lids High-output highway audio builds Professional motorcycle audio installations Related Motorcycle Audio Categories 2014-2023 Harley Audio 2014-2023 Harley Plug-and-Play Kits Shop Motorcycle Speakers Motorcycle Amplifiers System Components Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Harley Four-Speaker Audio System FAQ Which motorcycles does this system fit? It is configured for compatible 2014-2023 Harley-Davidson Road Glide and Street Glide motorcycles. Select the correct fairing style before ordering. How many speakers are included? Four speakers are included: two DS18 6.5-inch front speakers and two Cerwin-Vega 6×9 rear saddlebag speakers. What impedance are the speakers? All four included speakers have a nominal impedance of 4 ohms. How much power does the amplifier produce? The ION1600.4D produces 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms or 800 watts RMS × 2 bridged at 4 ohms. Does the amplifier include DSP? No. The ION1600.4D provides conventional gain and crossover controls but does not contain an integrated digital signal processor. Does this work with the factory Harley radio? The included RY-HARNESS.HD is designed to integrate the amplifier with compatible 2014-2023 factory Harley-Davidson radios. Does the factory radio wiring need to be cut? The compatible factory-radio signal connection uses the plug-and-play DS18 harness and does not require cutting the factory signal wiring. Do the saddlebag lids need to be cut? Yes. Both compatible factory saddlebag lids must be permanently cut to install the Cerwin-Vega 6×9 lid system. Are the speakers waterproof? The DS18 front speakers are IP65 rated, and the Cerwin-Vega rear speakers are water resistant. They should not be represented as submersible or completely waterproof. Why does the amplifier need careful gain setup? The amplifier can produce more continuous power per channel than the included speakers are rated to handle. Gain and crossover settings must limit clean output to safe levels. Is a Road Glide amplifier rack included with the Street Glide version? No. The mounting solution must match the selected motorcycle. The Road Glide and Street Glide versions require different fairing-specific mounting configurations. Is professional installation recommended? Yes. The package requires amplifier wiring, measured gain setup, fairing work and permanent saddlebag lid modification. Need Help Matching This Harley Audio System? Garage Bagger Stereo can help verify motorcycle fitment, speaker impedance selection, amplifier matching, fairing and saddlebag mounting, power and speaker wiring, and factory-radio signal integration before installation. Installation Services Request a Custom Build -
SaleHertz Audio Harley Davidson Plug and Play Fairing Kit (14-23)
Vendor:Hertz2014-2023 Harley Davidson Plug and Play Fairing Kit Product highlights • Power Handling: 200W Peak / 100W RMS• Water-repellent pressed paper cone speakers • Plug and Play • IP55 Aluminum chassis • Built-in sealed power cord• 4, 3, 2 Channel Modes Current Lead Time 5-7 business daysSale -
2014–2023 Harley Touring Plug & Play Audio Bundle - 14CXK65 Component + Amp Choice
Vendor:Cicada Audio2014–2023 Harley Touring Plug & Play Audio Bundle built for riders who want loud, clear sound at highway speed with a clean install path. This bundle includes Cicada Audio 14CXK65 6.5" component speakers plus your choice of a plug and play 4-channel amplifier so you can match output to your riding style and budget. Shop All 2014–2023 Plug and Play Kits Amplifier Installation Parts Speaker Installation Parts Component speakers deliver stronger front-stage detail and clarity. Choose your amplifier option below based on how loud you want to ride and how much headroom you want at speed. What’s Included Cicada Audio 14CXK65 6.5" Component Speaker Kit (midbass + tweeters) Plug and Play 4-Channel Amplifier Option (choose one): Cicada FLX1400 or DS18 ION1600 Built for 2014–2023 Harley touring bikes with plug and play focused integration Why This Bundle Works on 2014–2023 Harley Touring Bikes This bundle is designed for riders who want real performance gains without a complicated build. The 14CXK65 component system improves front-stage detail and output by separating the tweeter from the midbass, and pairing it with a dedicated 4-channel amplifier gives you the clean power needed for loud, clear sound at highway speed. Plug and play amplifier options keep your installation clean and reduce guesswork so the system performs the way it should. Choose Your Plug and Play Amplifier Option Cicada Audio FLX1400 (Plug and Play Option) Best choice for riders who want maximum headroom and strong clarity. Great when you want more output potential and clean power for higher-volume riding. View Cicada Audio FLX1400 Amplifier DS18 ION1600 (Plug and Play Option) Compact efficiency with clean amplification and strong real-world output. A proven touring amp platform for loud, clear sound at speed. View DS18 ION1600 Amplifier Speaker Details The Cicada Audio 14CXK65 component kit is designed for riders who want more front-stage detail and stronger clarity than a coaxial upgrade. Component speakers separate the tweeter from the midbass, improving imaging and giving you a cleaner, more defined sound when amplified. View Cicada Audio 14CXK65 Component Speaker Kit Recommended Add-Ons for Best Results For the cleanest install and best performance, most builds pair this bundle with the correct install parts: Amplifier Installation Parts Speaker Installation Parts Product Links Included + Options Cicada Audio 14CXK65 Component Speaker Kit DS18 ION1600.4 Amplifier Cicada Audio FLX1400 Amplifier If you need help choosing the right amplifier option for your output goals and riding style, Garage Bagger Stereo can help you dial in the best setup. Fitment Designed for 2014–2023 Harley Davidson touring motorcycles. If you have questions about your exact model or factory audio configuration, Garage Bagger Stereo can help confirm the right configuration before you order. Shop the Bundle Select your amplifier option and upgrade your 2014–2023 Harley touring audio with a plug and play bundle designed for louder volume, cleaner sound, and a cleaner install. -
2014-2023 Harley-Davidson Ultra 4-Speaker Audio System | Cicada Audio
Vendor:Cicada Audio2014-2023 HARLEY-DAVIDSON ULTRA AUDIO 2014-2023 Harley-Davidson Ultra 4-Speaker Audio System | Cicada Audio | 14FLXCXX-4X4U A complete Cicada Audio upgrade built for 2014-2023 Harley-Davidson Ultra motorcycles, combining a 4-channel FLX500.4 amplifier with two pairs of CXX65.2 Pro Coaxial speakers for four total speaker locations. The system ships complete with amplifier mounting hardware and Cicada-branded grilles for both Road Glide Ultra and Street Glide Ultra, so both sets are included with every order. See Everything Included View Channel Configuration Complete 4-Speaker Ultra System 2014-2023 Road Glide Ultra / Street Glide Ultra Cicada FLX500.4 4-channel amplifier Two pairs of CXX65.2 Pro Coaxial speakers (4 total) Model-specific amp rack and grilles included H-D T-harness with Maestro AR compatibility 8 AWG amplifier power install kit Cicada Audio Ultra 4-Speaker System Overview This Garage Bagger Stereo package is built around Cicada Audio's 14FLXCXX-4X4U system, engineered specifically for 2014-2023 Harley-Davidson Ultra motorcycles. It pairs a compact 4-channel amplifier with four Pro Coaxial speakers, giving each speaker its own dedicated amplifier channel for clean, evenly powered output front and rear. Because Road Glide Ultra and Street Glide Ultra use different amplifier mounting locations and grille shapes, this system includes both the Road Glide and Street Glide amplifier racks and both grille sets in every kit, so the correct hardware is on hand no matter which model you're installing on. Harley-Davidson Fitment 2014-2023 Road Glide Ultra Includes the 14HDAR-RG amplifier mounting rack and CHDRGG Cicada-branded grille set, included in every kit. 2014-2023 Street Glide Ultra Includes the 14HDAR-SG amplifier mounting rack and CHDSGG Cicada-branded grille set, included in every kit. Factory Speaker Locations Speakers are designed for factory Harley-Davidson speaker locations on 2014-and-newer touring models. Exact fitment verification required: Confirm your motorcycle year, model, existing radio, and any prior audio modifications before ordering. Everything Included in the System Cicada FLX500.4 Amplifier One compact 4-channel amplifier producing 95 watts RMS per channel at 4 ohms, or 125 watts RMS per channel at 2 ohms. (2) CXX65.2 Speaker Pairs Four total 6.5-inch, 2-ohm Pro Coaxial speakers with Kevlar cones and PEI tweeter domes. Both Amplifier Racks Included 14HDAR-RG for Road Glide Ultra and 14HDAR-SG for Street Glide Ultra, both included in every kit. Both Grille Sets Included CHDRGG for Road Glide Ultra and CHDSGG for Street Glide Ultra, both included with mounting hardware. HDPG8K Power Install Kit 8 AWG amplifier power and ground installation kit sized for the FLX500.4. HDTSLINKAR T-Harness Harley-Davidson T-harness with Maestro AR compatibility for factory radio and steering-control integration. Confirm installation hardware: Verify amplifier mounting location, speaker wiring runs, and any additional adapters needed for your specific motorcycle before installation. Amplifier and Speaker Configuration Four Independent Channels Each of the four 2-ohm CXX65.2 speakers is powered by its own dedicated FLX500.4 amplifier channel. No bridging is required. Matched 2-Ohm Load The FLX500.4's 2-ohm rating is matched directly to the CXX65.2's 2-ohm impedance for full rated output per channel. Speaker Count Four speakers / two pairs Speaker Model Cicada CXX65.2 Speaker Impedance 2Ω per speaker Speaker Power Handling 100W RMS / 200W maximum per speaker Amplifier Output at 2Ω 125W RMS × 4 Channels Used Four (one per speaker) Bridged Operation Required No Output setup required: Set gain and crossover points using proper test equipment rather than by ear to protect the speakers and amplifier. Cicada CXX65.2 Pro Coaxial Speakers The CXX65.2 is designed specifically for factory Harley-Davidson speaker locations, combining a Kevlar cone with a PEI-dome tweeter and Cicada's V8 Dispersion Guide for wide, even coverage. 100W RMS Each speaker handles 100 watts RMS and 200 watts maximum. 2-Ohm Impedance Matched to run one speaker per FLX500.4 channel. 93 dB Sensitivity High efficiency for strong output from motorcycle amplifier power. Kevlar Cone Lightweight, moisture-resistant, and built for efficiency. PEI Dome Tweeter Moisture-resistant tweeter dome for bright, dispersed high frequencies. Rain or Shine™ Design All-weather construction built for open-air motorcycle use. Speaker Model Cicada CXX65.2 Quantity Included Four speakers / two pairs Speaker Type Two-way coaxial loudspeaker Nominal Diameter 6.5 inches Nominal Impedance 2Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Sensitivity 93 dB Frequency Response 55 Hz–20 kHz ±3dB Cone Material Kevlar Tweeter 1-inch / 25mm PEI dome Mid-Bass Voice Coil 1.4-inch / 35mm Magnet N45H Neodymium Internal Crossover Built-in 6 dB crossover Mounting Diameter 5.43 inches / 138mm Mounting Depth 2.26 inches / 57mm Grilles & Hardware Included Warranty Two-year Cicada Audio warranty Verify mounting clearance: Confirm mounting diameter, depth, and grille fitment against your motorcycle before installation. Cicada FLX500.4 Four-Channel Amplifier The FLX500.4 is a compact, high-efficiency Class-D amplifier built for motorcycle installs where space is limited but clean, dedicated power per speaker still matters. 125W × 4 at 2Ω Rated output matched to the included 2-ohm speakers. 95W × 4 at 4Ω Also supports 4-ohm speaker configurations. 250W × 2 Bridged Bridged mode available for properly matched applications. Ultra-Compact Chassis Sized to fit inside fairings, saddlebags, and tight mounting locations. Adjustable Crossovers Selectable LPF/FULL/HPF with 20 Hz–20 kHz range and 6/12/24/48 dB slopes. Flexible Turn-On REM, DC, or VOX turn-on modes for factory or aftermarket sources. Amplifier Model Cicada FLX500.4 Amplifier Type Four-channel Class-D amplifier Power at 4Ω 95W RMS × 4 Power at 2Ω 125W RMS × 4 Bridged Power at 4Ω 250W RMS × 2 Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Fuse 50A Frequency Response 20 Hz–20 kHz ±3dB Signal-to-Noise Ratio 91 dB (A-weighted) Damping Factor 200 THD + Noise 0.1% at 10% rated power (2Ω per channel) Gain Range 0.2V–12V Turn-On Modes REM / DC / VOX Crossover Modes LPF / FULL / HPF Crossover Range 20 Hz–20,000 Hz Crossover Slopes 6 / 12 / 24 / 48 dB per octave Dimensions (with brackets) 5.2 × 4.9 × 2.0 in Dimensions (chassis only) 4.0 × 4.9 × 2.0 in Power wiring verification: Confirm final power cable, ground cable, and fuse configuration against current Cicada Audio guidance before powering the amplifier. Factory Radio Integration The included HDTSLINKAR T-harness with Maestro AR compatibility integrates the amplifier with the factory Harley-Davidson radio system, supporting factory steering-control and audio integration on compatible models. Confirm compatibility: Verify Maestro AR module compatibility with your specific year and factory radio before ordering. Power Wiring and Installation Notes Disconnect the motorcycle battery before installation. Install primary fuse protection close to the positive battery terminal. Use secure, corrosion-resistant battery and ground connections. Protect wiring from steering movement, heat, and sharp edges. Keep signal wiring separated from high-current power wiring. Confirm charging-system and battery condition before high-output use. Connect one CXX65.2 speaker to each of the four amplifier channels. Set gain using measured clean output rather than by ear. Use the Road Glide or Street Glide amplifier rack and grille set that matches your motorcycle; the unused set can be kept as a spare. Professional installation recommended: Correct mounting, wiring, and gain setup protect the speakers and amplifier and improve long-term reliability. Related Motorcycle Audio Categories Cicada Audio Shop Cicada Audio Motorcycle Speakers Motorcycle Amplifiers Amplifier and Power Support Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Ultra 4-Speaker System FAQ Which motorcycles does this system fit? This system is built for 2014-2023 Harley-Davidson Road Glide Ultra and Street Glide Ultra motorcycles. Does it include hardware for both Road Glide and Street Glide? Yes. Every kit includes both the Road Glide and Street Glide amplifier racks and both grille sets, so you simply use the set that matches your motorcycle. How many speakers are included? Four total Cicada CXX65.2 Pro Coaxial speakers, supplied as two matched pairs. What impedance are the speakers? Each included speaker has a nominal impedance of 2 ohms. How much power does each channel produce? The FLX500.4 produces 125 watts RMS per channel at 2 ohms, matched to the included speakers. Are the speakers bridged? No. Each of the four speakers runs from its own individual amplifier channel. Does this integrate with the factory radio? Yes, through the included HDTSLINKAR T-harness with Maestro AR compatibility on supported models. Is professional installation recommended? Yes. Installation involves amplifier mounting, power wiring, speaker installation, and measured gain setup. Need Help Building the Right Ultra Audio System? Garage Bagger Stereo can help with impedance selection, amplifier matching, mounting, wiring and signal integration for your 2014-2023 Harley-Davidson Ultra. Installation Services Request a Custom Build -
Rockford Fosgate 14+ Harley-Davidson CVO Stage-2 Kit (Gen-3)
Vendor:Rockford FosgateRockford Fosgate HD14CVO-STG2 UNRELENTING PERFORMANCE The HD14CVO-STG2 is a high-performance 2-speaker, 800-watt amplified audio system that includes the following: • (2) 6.5" fairing speakers • (2) 5x7" saddlebag speakers • (1) 800W 4-channel amp • (1) amp installation kit You must flash your factory radio to use this kit. FEATURES AT A GLANCE Kits bolt to factory attachment points Plug and Play design for easy installation No drilling or cutting is required. Direct connect wiring harnesses for Harley-Davidson® models M5-800X4: 800-watt 4-channel IPX6 Element Ready™ amplifier TMS57: Factory replacement 5"x7" 2-way speaker with integrated phase-aligned 25 mm tweeter 90-degree harness included with amp install kit for Road Glide® installations Factory Harley-Davidson® Boom!™ Box 4.3, 6.5GT, and GTS must be flashed to use this kit RATS (Rockford Automated Testing System) proprietary quality & performance tested Klippel Verified certification program delivers the best possible loudspeakers T-harness features loop-thru for Digital Signal Processor (DSR1 sold separately) T-harness supports front/rear fader (requires flash: "Rockford Fosgate 2014+ All Bikes") Y-adaptors support the expansion of speakers in the lower fairing, saddlebags, or Tour-Pak® 2-Year Warranty TMS65: 6.5" 2-way Element Ready™ speaker with integrated phase-aligned 25 mm tweeter Speakers custom-tuned to hear music over wind, road & exhaust noise at highway speed RFK-HD14M5: Amp install kit for M5-800X4 on 2014+ Harley-Davidson® models The next step in motorcycle performance is our M5 audio kits, which are the loudest and clearest audio systems we’ve created. Featuring simple plug-and-play installation and paired with freeway speed output all create the best in-class on-bike audio experience. Plug-and-Play Design: It is designed to work right out of the box. Everything is included for easy installation and to ensure less time in the garage and more time out riding. Full Throttle Output: Audio engineered to perform on the open road. Speakers and amplifiers are specifically tuned and designed to not only overcome wind, road, and exhaust noise but also to give you that second-to-none audio experience on your bike. RF3 (Rockford Factory Fit and Finish): Designed and engineered to match and compliment the factory fit and finish of your bike. These components are purpose-built to the exact specifications to ensure the best-in-class fitment and look. Element Ready™: Purpose-built for the harsh motorcycle environment. The speakers and amplifier are designed to stand up to water, dirt, UV, and motorcycle vibration, ensuring that your audio system will stand the test of time. -
SaleHertz Audio Plug and Play 4 Speaker Kit for Factory Tour Pack HSP2
Vendor:Hertz2014-2023 Harley Davidson Plug and Play Fairing and Tour Pack Product highlights • Power Handling: 200W Peak / 100W RMS• Water-repellent pressed paper cone speakers • Plug and Play 4 speaker system • IP55 Aluminum chassis • Built-in sealed power cord• 4, 3, 2 Channel Modes Current Lead Time 5-7 business daysSale
THIS IS THE REFERENCE STANDARD FOR MOTORCYCLE AUDIO
Plug-and-play kits shouldn’t feel like a gamble. GBS builds around platform-correct wiring, known fitment, and clean output where it matters — on the highway.
- No guessing: correct fitment + correct wiring for touring platforms
- Cleaner installs with fewer surprises during install day
- Real performance gains once powered and tuned correctly
WHAT’S INCLUDED (VARIES BY BUILD)
- Correct-fit speakers
- Amplification options
- Platform-specific harnessing
- Mounting + install hardware
Choosing a full kit means fewer surprises during install and better results once the system is tuned and powered correctly.
Shop by Fitment
Kits designed for 2014–2023 Harley touring motorcycles with cleaner installation, correct wiring integration, and real sound gains over stock.
Kits built for the updated 23.5+ CVO and 2024+ touring platforms with correct fitment and clean integration for the new factory audio architecture.
Choose Your Harley Touring Platform
2014–2023 Harley Plug-and-Play Kits
Kits designed for 2014–2023 Harley touring motorcycles with cleaner installation, correct wiring integration, and real sound gains over stock.
23.5+ / 2024+ Harley Plug-and-Play Kits
Kits built for the updated 23.5+ CVO and 2024+ touring platforms with correct fitment and clean integration for the new factory audio architecture.
Plug-and-Play Amplifier Options (Amp-Only)
Already have speakers? Many of our 4-channel motorcycle amplifiers now offer plug-and-play options for 2014–2023 and 23.5+ touring builds.
Recommended Next Steps for Your Build
- Install clean and serviceable: Use correct wiring, mounts, and install essentials for your platform.
- Choose the right speakers: Match output goals and fitment with coaxial or pro coaxial options.
- Scale output correctly: The right amplifier and clean signal path is where “real riding speed” happens.
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.