Browse Collections
-
SaleCerwin-Vega PH694 6x9" Pro Full-Range Coaxial Horn Speakers
Vendor:Cerwin-VegaCerwin-Vega 6x9" Pro Full-Range Coax Horn Speakers PH694 The Cerwin-Vega PH694 6x9" Pro Series horn-loaded coaxial speakers deliver powerful output, sharp high-frequency projection, and strong midbass for motorcycles and high-SPL mobile audio systems. Featuring a treated paper cone, compression horn tweeter, and rugged steel basket, the PH694 provides clear, high-efficiency sound that cuts through road and wind noise while maintaining durability under heavy use. Specifications: Speaker Type: 2-Way Full-Range Coaxial Horn SpeakerSize: 6" x 9"Power Handling (RMS): 160 wattsPower Handling (Peak): 320 wattsImpedance: 4 ohm (Single Voice Coil)Sensitivity: 101 dB (High-efficiency SPL output)Frequency Response: 80 Hz – 18,000 HzMidrange Cone Material: Treated paperTweeter Type: Horn-loaded compression driverTweeter Diaphragm: PolyimideSurround Material: Treated clothFrame/Basket: Stamped steelMagnet Type: Ferrite (Ceramic)Crossover: Internal passive networkBi-Amp Capable: YesMounting Depth: 3.9 in (approx.)Cutout Dimensions: 8.74 in x 5.98 inRecommended Use Cases:– Motorcycle audio– Powersports / side-by-side– High-SPL car audio– Outdoor/open-air vehicles– Demo builds and competition systemsSale -
SaleCerwin-Vega SM69F4 RPM Stroker Marine 6x9" 2-Way Speakers
Vendor:Cerwin-VegaCerwin-Vega RPM Stroker Marine 6x9" 2- Way Speakers SM69F4 Built on a cast aluminum basket with IPX5 water resistance, UV-stable waterproof composite cone, and integrated RGB LED lighting, they are engineered for harsh marine and powersports environments while maintaining clean highs, strong midbass, and long-term durability. Key Specifications: Speaker size: 6x9 in Speaker type: 2-way coaxial Impedance: 4 ohm (single voice coil) Cone material: polypropylene Diaphragm material: titanium Basket material: cast aluminium Magnet type: ferrite (ceramic) Surround material: treated cloth Crossover: internal Water resistance: IPX5 Frequency response: 80Hz–20kHz Voice coil diameter: 1.5 in (38mm) Sensitivity (1W/1m): 93dB Xmax: 4mm Power handling (RMS): 150W Power handling (MAX): 300W Mounting diameter: 8.64 x 6 in (219.5 x 152.5mm).Sale -
SaleCerwin-Vega ST69CX Stroker 6x9" 2-Way Coax Speakers
Vendor:Cerwin-VegaThe Cerwin-Vega ST69CX Stroker is a 6x9" 2-way coaxial speaker set with a titanium dome tweeter, built for high-output audio systems. This listing covers the 4 ohm ST69CX; a 2 ohm version, ST692CX2, is also offered.Key Specs Impedance: 4 ohms (single voice coil); bi-ampable Power handling: 125 W RMS, 500 W max Frequency response: 45 Hz to 20 kHz; sensitivity 90.5 dB Polypropylene cone, titanium diaphragm, Santoprene surround, cast aluminum basket Ferrite woofer magnet, neodymium tweeter magnet; internal crossover IPX5 water resistance Mounting depth 4.25"; mounting diameter 8.8 x 9.5" Fitment and Installation NotesCheck the 4.25" mounting depth and 8.8 x 9.5" diameter against your lid or fairing before ordering.Browse more coaxial speakers, Cerwin-Vega and speaker adapters.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio 24CXK69 6x9" Component Speaker Kit for 2024-Present Harley-Davidson | 2Ω or 4Ω
Vendor:Cicada AudioThe Cicada Audio 24CXK69 is a complete 6x9-inch component speaker kit: a mid-bass driver plus a 1-inch ring radiator horn tweeter with external crossover. It is available with a 2-ohm or 4-ohm mid-bass driver.Key Specs Mid-bass: 6x9 in, 250W RMS / 500W max, 94 dB sensitivity, 70Hz-10kHz (+/-3 dB) Mid-bass cone: Carbon Matrix Composite; N35SH neodymium magnet; die-cast aluminum basket Mid-bass mounting depth 3.26 in (83mm); mounting diameter 5.7 in x 8.5 in (145mm x 216mm) Tweeter: 4-ohm 1-inch aluminum dome, 50W RMS / 100W max, 101 dB, 12dB/7kHz crossover Tweeter mounting depth 1.1 in (28mm), diameter 2 in (50.8mm) Two-year warranty Fitment and Installation NotesSold for compatible 2024+ Harley-Davidson models. Measure your 6x9 location against the depth and diameter above before ordering.Related: Cicada Audio, speaker installation parts, midrange and mid-bass speakers.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio CH69W 6x9" Pro Coaxial Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio CH69W Pro Coaxial Horn Speaker 6x9" (2Ω and 4Ω) FEATURES: Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Removable threaded horn ring for easy modification Rain or Shine™ all-weather performance design Available in 4- or 2-Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient External 12dB crossover with optional -3/-6 tweeter attenuator 4-inch OFC copper wire tweeter voice coils offer great sound while generating less heat Water-resistant treated paper cone Lightweight / rigid Maximized efficiency / super strong Black Coat™ 2-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance N35SH Neodymium magnet Die-cast Aluminum custom tooled basket with Vortex Flow Venting™ Warranty: 2 years SPECIFICATIONS: 4Ω – 6X9-inch coaxial horn driver Power handling: 250W RMS/500W MAX Voice Coil: 2.5-inch/64mm Mid-bass & 1.4-inch/36mm Tweeter Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: water resistant treated paper cone Magnet: Neodymium Sensitivity: 95dB Frequency response 75Hz – 20kHz +/- 3dB Mounting Depth: 3.7-inch/93mm Mounting Diameter: 6.6-inch/155mm X 9.3-inch/226mmSale -
SaleCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair) All Weather 6x9 Pro Coaxial Driver A Weatherproof Horn Cover is included on the compression driver. SPECIFICATIONS: 4Ω – 6X9-inch PRO coaxial horn driver Power handling: 400W RMS/800W MAX each Voice Coil: 2.5-inch/64mm Mid-bass & 1.75-inch/44mm Tweeter High-temperature design Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 92dB, 1W / 1M response 46Hz – 20kHz +/- 3dB Mounting Depth: 3.75-inch/96mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Rain or Shine™ all-weather performance design Available in 4 or 2Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient 1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat External 12dB crossover with optional -3/-6 tweeter resistor attenuatorSale -
Cicada Audio CHX69.4 6x9 Speakers 4Ω – Open Box
Vendor:Cicada AudioOpen Box Item Cicada Audio CHX69-4 4Ω 6x9 speaker. This open box unit has been inspected and tested to ensure full functionality. Fully tested and functional May show minor cosmetic wear Original packaging and accessories may be missing or show wear May have been installed and played for demo purposes only -
SaleCicada Audio CM69X 6x9" Midrange Speakers 6x9" (Pair)
Vendor:Cicada AudioThe Cicada Audio CM69X is a pair of 6x9" mid-bass component speakers with Carbon Matrix Composite cones, offered in 2 ohm and 4 ohm versions. Cicada designs them with a Rain or Shine all-weather construction.Key Specs Power handling: 250W RMS / 500W MAX 2" / 51mm voice coil, OFC copper wire with Black Coat N35SH neodymium magnet; die-cast aluminum basket Sensitivity: 94dB; response 70Hz-10kHz +/-3dB Mounting depth 3.26" / 83mm Mounting diameter 5.7" / 145mm x 8.5" / 216mm Two-year warranty Browse more midrange speakers and Cicada Audio, or see our custom build options.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
Cicada Audio CMB69 6x9 Mid Bass Speakers All-Weather Motorcycle Audio
Vendor:Cicada AudioCicada Audio CMB69 6x9" Mid Bass Speaker The Cicada Audio CMB69 is a purpose-built 6x9 mid-bass driver designed for motorcycle audio systems, delivering real low-frequency authority without sacrificing clarity. Built for all-weather use and optimized for Cicada Audio lid kits, the CMB69 delivers controlled, punchy bass where it matters most. Shop Motorcycle 6x9 Speakers View Plug-and-Play Kits Shop Plug-and-Play Amplifiers Add DSP Control THE REFERENCE STANDARD Fitment First. Then Performance. We’ll confirm your lid platform, wiring path, and amplification plan so the system hits hard and stays clean at speed. Features & Benefits True mid bass performance for motorcycle audio systems All-weather construction for harsh riding conditions Optimized for Cicada Audio lid kits (all model years) High power handling with controlled cone movement Designed to integrate cleanly with amplified systems Specifications Impedance4Ω or 2Ω Speaker Size6x9-inch Mid Bass Driver Power Handling150W RMS / 300W MAX (each) Voice Coil1.5-inch Cone MaterialCarbon Matrix Composite™ MagnetY3S Ferrite Sensitivity88dB (1W / 1M) Frequency Response45Hz – 1kHz ±3dB Mounting Depth3.9-inch Compatibility & Notes Works with Cicada Audio lid kits for all years Designed as a dedicated bass driver Sold as a pair Frequently Asked Questions Is this a full-range 6x9? No—CMB69 is a dedicated mid-bass driver built for low-end authority and control. Do I need an amplifier? For real output and tight control, yes—these are designed to integrate cleanly with amplified systems. Will this work with my lid setup? It’s optimized for Cicada Audio lid kits across model years. If you’re unsure, we’ll confirm fitment. Start a Build Consultation Amplifier Installation Parts -
SaleCicada Audio CX69 6x9" Coaxial Speaker (Pair)
Vendor:Cicada Audio6x9" 2Ω or 4Ω High Performance Full-Range Coaxial Speaker The new Cicada Audio CX69.2 speakers are a perfect solution for 2014 and later Harley Fairings. These 6x9 2 or 4 ohm 2-Way Coaxial waterproof speakers are shallow, an easy fit, and do not require an additional tweeter location on the fairing. They simply bolt into the factory speaker locations. Available in 4Ω or 2Ω …the 2Ω get more output with smaller higher efficiency / lower output amplifiers and don’t NEED a giant “current hog” for an amplifier to drive these. Specs: 125WRMS/250MAX Power Handling- EACH Frequency Response: 53Hz -20Khz+/-5dB Neodymium High Energy/ Light Weight N35 Magnet structure Waterproof IMPP Cone with NBR surrounds Heavy Duty/ Injected High-Temp Polymer Frame. 1.4” 2Ω or 4Ω  – High Temp Voice Coil (Black Coat™) Voice Coil MidBass Shortening Ring for the Ultimate in Speaker Control 1.0” PEI dome tweeter with Neodymium magnet DPSH ® “Dual-Phase Slot Horn” Advanced Voice Coil Heat Sink Design for Better Heat Dissipation High Sensitivity: 934dB 1W/1M Average (1W/1M – 2.83V) Built in 6dB Crossover Low Profile Design / Easy Fit Mounting Depth: 2.55” / 64.8mm Mounting Diameter: 5.77” X 8.5” / 145.5mm X 215.9mm Outside Dimensions: 6.4” X 9.2” / 126.56mm X 233.7mm SOLD IN PAIRS Weather treatedSale -
SaleCicada Audio CXK69 - 6X9-inch Mid-Bass 2 Way Component Speaker Kit (2Ω or 4Ω)
Vendor:Cicada AudioCicada Audio CXK69 (2Ω or 4Ω) 6X9-inch Mid-Bass 2-Way Component Speaker Kit Fits 6x9 lids for 14-23 Does not fit 23.5-24 HD Lids MID-BASS FEATURES Rain or Shine™ all-weather performance design OFC Copper shorting ring for extended high-frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high-temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die-cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty MID_BASS SPECIFICATIONS 2Ω / 6X9-inch mid-bass driver 4Ω / 6X9-inch mid-bass driver Power Handling: 250W RMS / 500W MAX Voice Coil: 2-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 10 kHz +/- 3 dB Mounting Depth: 3.26-inch/83mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm TWEETER FEATURES Rain or Shine™ all-weather performance design The aluminum tweeter dome diaphragm delivers brighter sound and maximized efficiency OFC Copper wire voice coil offers great sound while generating less heat Custom tooled, vented, encased external crossover Field replaceable diaphragm Aluminum die-cast custom tooled backplate N35SH Neodymium magnet motor Two (2) year warranty TWEETER SPECIFICATIONS 4Ω / 1-inch shallow ring radiator horn tweeter Power Handling: 50W RMS / 100W MAX Voice Coil: 1-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12 dB @ 7 kHz Magnet: Neodymium Sensitivity: 101 dB, 1W / 1M Frequency Response: 2 kHz – 20 kHz +/- 3 dB Mounting Depth: 1.1-inch/28mm Mounting Diameter: 2-inch/50.8mmSale -
SaleCicada Audio CXK69 6x9" Component Speaker Kit | 2-Ohm or 4-Ohm
Vendor:Cicada AudioThe Cicada Audio CXK69 is a complete 6x9-inch component speaker kit: a mid-bass driver plus a 1-inch ring radiator horn tweeter with external crossover. It is available with a 2-ohm or 4-ohm mid-bass driver.Key Specs Mid-bass: 6x9 in, 250W RMS / 500W max, 94 dB sensitivity, 70Hz-10kHz (+/-3 dB) Mid-bass cone: Carbon Matrix Composite; N35SH neodymium magnet; die-cast aluminum basket Mid-bass mounting depth 3.26 in (83mm); mounting diameter 5.7 in x 8.5 in (145mm x 216mm) Tweeter: 4-ohm 1-inch aluminum dome, 50W RMS / 100W max, 101 dB, 12dB/7kHz crossover Tweeter mounting depth 1.1 in (28mm), diameter 2 in (50.8mm) Two-year warranty Fitment and Installation NotesCicada does not name a specific bike for this kit. Measure your 6x9 location against the depth and diameter above before ordering.Related: Cicada Audio, speaker installation parts, midrange and mid-bass speakers.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale
Key Specifications
| Application | Harley Davidson and Indian touring motorcycles |
| Category Role | System completion and installation support |
| Component Types | Adapters, wiring, power accessories, mounting hardware |
| Design Focus | Electrical integrity, fitment accuracy, reliability |
| Use Case | Staged upgrades and full custom audio builds |
| Installation Level | Professional-grade motorcycle audio systems |
Specifications summarized from manufacturer technical data. Always verify compatibility and system requirements before installation.
Motorcycle Audio Parts and Accessories
Motorcycle parts and accessories are the supporting components that allow an audio system to function correctly, reliably, and safely. This collection includes purpose-built parts selected specifically for Harley Davidson and Indian touring motorcycles, where fitment accuracy and electrical integrity matter.
These components are not optional add-ons — they are required to complete professional-grade audio installations. From signal integration to power management and mounting hardware, each item in this collection addresses a specific requirement in motorcycle audio system design.
This collection supports a wide range of system needs, including:
• Audio integration adapters and signal interfaces
• Electrical and power-management accessories
• Mounting hardware and installation components
• Model-specific fitment and interface parts
Proper accessory selection prevents noise issues, voltage instability, improper mounting, and premature component failure. These parts ensure speakers, amplifiers, DSPs, and subwoofers operate as designed within the constraints of touring motorcycle platforms.
All products in this collection are vetted for compatibility with Harley and Indian motorcycles and align with professional installation standards. This category serves as a system-completion resource for both staged upgrades and full custom audio builds.
System Essentials
Motorcycle Amplifiers
Motorcycle Digital Sound Processors
Motorcycle Speaker Installation Parts
Custom Motorcycle Audio Builds
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.Â
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.