Browse Collections
-
SaleCicada Audio CHX65 6.5" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX65 6.5" Pro Coax Horn Speakers Cicada Audio CHX65 6.5" Pro Coax Horn Speakers are built for Harley-Davidson bagger audio systems that need loud, clean, all-weather motorcycle sound at highway speed. Designed for high-output motorcycle audio, the CHX65 combines a 6.5" pro coaxial driver, horn-loaded clarity, Carbon Matrix Composite cone construction, and strong projection for riders who want more output from their Harley audio system. Shop Cicada Audio 6.5" Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD All-Weather 6.5" Cicada Speakers for Harley Audio Built for riders who want loud vocals, sharper clarity, stronger projection, and real motorcycle audio performance from a 6.5" Harley speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CHX65 6.5" Pro Coax Horn Speakers Current Part Numbers CHX65.2 = 2Ω version / CHX65.4 = 4Ω version Speaker Size 6.5" Speaker Type Pro coaxial horn speaker Best For Harley-Davidson bagger audio, fairing speaker upgrades, high-output motorcycle audio systems, and amplified 6.5" speaker locations System Goal Louder vocals, stronger projection, clean open-air output, all-weather durability, and better highway-speed performance Sold As Pair Always verify impedance, speaker location, mounting depth, amplifier power, wiring, crossover setup, and final fitment before ordering for your Harley-Davidson audio build. Built for Harley-Davidson Bagger Audio The Cicada CHX65 is made for riders who want more than a basic replacement speaker. It is built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and custom bagger audio systems that need louder output, cleaner vocals, better clarity, and strong projection in real riding conditions. With a horn-loaded design, all-weather protection, high-efficiency output, and motorcycle-focused construction, the CHX65 is a strong fit for amplified Harley audio systems where the speaker needs to perform at speed, not just sound good in the garage. All-Weather Pro Coax Horn Design The CHX65 uses Cicada’s all-weather design with a Nanofram horn cover, Carbon Matrix Composite cone, neodymium magnet structure, aluminum tweeter diaphragm, and external crossover network. This makes it a strong speaker choice for Harley riders who want loud, clear, reliable motorcycle audio in real-world riding conditions. The included horn cover helps protect the compression driver, while the pro coaxial layout gives the speaker the projection and efficiency needed for open-air Harley audio builds. Specifications Speaker Size 6.5" pro coaxial horn driver Impedance Options CHX65.2 = 2Ω / CHX65.4 = 4Ω Power Handling 300 watts RMS / 600 watts max Frequency Response 70Hz–20kHz +/-4dB Sensitivity 92dB, 1W / 1M Midbass Voice Coil 2.0" / 51mm high-temperature voice coil Tweeter Voice Coil 1.4" / 35.56mm tweeter voice coil Cone Carbon Matrix Composite™ cone Tweeter Dome Aluminum tweeter diaphragm Magnet Neodymium magnet structure Crossover External 12dB custom-tooled, vented, encased crossover Tweeter Attenuation -3dB / -6dB heat-sink encased resistor pack Horn Cover Nanofram™ horn cover Weather Protection Exclusive Cicada all-weather design for rain protection, waterproofing, and UV protection Mounting Depth 2.64" / 67mm Mounting Diameter 5.67" / 144mm Best Use for the Cicada CHX65 The CHX65 is best used in Harley-Davidson bagger audio systems where the goal is loud 6.5" speaker output, strong vocal projection, clean highs, and better performance from fairing or custom speaker locations. Amplified System Recommended These speakers are intended for serious motorcycle audio systems. For best results, match the CHX65 with proper amplifier power, correct impedance selection, clean wiring, and a real tuning plan. Fitment and Installation Notes The Cicada CHX65 is designed for 2014+ Harley-Davidson factory-designed speaker locations, but every motorcycle audio build should be verified before ordering. Confirm speaker depth, mounting diameter, pod clearance, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, and custom bagger applications may require installation planning, speaker pod work, adapter rings, or system tuning depending on the exact bike and audio layout. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CHX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Pro Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CHX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair) All Weather 6x9 Pro Coaxial Driver A Weatherproof Horn Cover is included on the compression driver. SPECIFICATIONS: 4Ω – 6X9-inch PRO coaxial horn driver Power handling: 400W RMS/800W MAX each Voice Coil: 2.5-inch/64mm Mid-bass & 1.75-inch/44mm Tweeter High-temperature design Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 92dB, 1W / 1M response 46Hz – 20kHz +/- 3dB Mounting Depth: 3.75-inch/96mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Rain or Shine™ all-weather performance design Available in 4 or 2Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient 1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat External 12dB crossover with optional -3/-6 tweeter resistor attenuatorSale -
SaleCicada Audio CHX8 8" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX8 8" Pro Coaxial Horn Speaker Pair Cicada Audio CHX8 8" Pro Coaxial Horn Speakers are built for Harley-Davidson bagger audio systems that need serious output, strong projection, and clean all-weather motorcycle sound. Designed for high-output custom Harley audio builds, the CHX8 combines an 8" pro coaxial horn driver, Carbon Matrix Composite cone, neodymium motor structure, external crossover, and horn-loaded clarity for riders who want more authority from larger speaker locations. Shop Cicada Audio Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD High-Output 8" Cicada Speakers for Harley Audio Built for riders who need louder vocals, stronger projection, more speaker authority, and all-weather motorcycle audio performance from an 8" speaker platform. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CHX8 8" Pro Coaxial Horn Speaker Pair Speaker Size 8" Speaker Type Pro coaxial horn driver speaker Impedance Options 2Ω and 4Ω versions available depending on selected variant Best For Harley-Davidson bagger audio, custom speaker locations, larger fairing or pod upgrades, and high-output motorcycle audio systems System Goal Louder output, stronger projection, cleaner vocals, improved open-air sound, and all-weather Harley audio performance Sold As Pair Always verify impedance, mounting depth, mounting diameter, speaker pod clearance, amplifier power, crossover setup, wiring, and final fitment before ordering for your Harley-Davidson audio build. Built for High-Output Harley-Davidson Bagger Audio The Cicada CHX8 is designed for riders building serious Harley-Davidson motorcycle audio systems where a standard replacement speaker is not enough. With a larger 8" speaker platform, horn-loaded output, and all-weather construction, this speaker is built for custom bagger audio systems that need volume, clarity, and projection while the bike is moving. This speaker is a strong option for Harley audio builds using larger speaker locations, custom pods, advanced fairing setups, or full custom bagger systems where the goal is more authority and a stronger open-air listening experience. All-Weather Pro Coax Horn Design The CHX8 uses Cicada’s all-weather pro coaxial horn design with a weatherproof horn cover, Carbon Matrix Composite cone, neodymium magnet structure, aluminum tweeter diaphragm, and external crossover network. This construction supports strong output, clean projection, and reliable motorcycle audio performance in real riding conditions. The included Nanofram™ horn cover helps protect the compression driver, while the external 12dB crossover and optional tweeter attenuation help tune the speaker for different system goals. Specifications Speaker Size 8" pro coaxial horn driver Power Handling 400 watts RMS / 800 watts max each Frequency Response 46Hz–20kHz +/-3dB Sensitivity 92dB, 1W / 1M Midbass Voice Coil 2.5" / 64mm voice coil Tweeter Voice Coil 1.75" / 44mm OFC copper wire tweeter voice coil Tweeter Dome Aluminum tweeter diaphragm Cone Carbon Matrix Composite™ cone Magnet Neodymium magnet structure Crossover External 12dB custom-tooled, vented, encased crossover Tweeter Attenuation -3dB / -6dB heat-sink encased resistor crossover option Horn Cover Nanofram™ horn cover Weather Protection Rain or Shine™ all-weather performance design with protection for motorcycle audio use Mounting Depth 3.3" / 84mm Mounting Diameter 7.2" / 182mm Sold Pair Best Use for the Cicada CHX8 The CHX8 is best used in Harley-Davidson bagger audio builds where the goal is larger speaker output, stronger projection, more authority, and a louder open-air motorcycle audio system. Custom Fitment Required This is an 8" pro coaxial horn speaker. Always confirm the exact mounting location, pod depth, adapter requirements, grille clearance, amplifier power, and system layout before ordering. Fitment and Installation Notes The Cicada CHX8 is intended for serious motorcycle audio systems and custom Harley-Davidson bagger builds. Because this is an 8" speaker platform, fitment must be verified carefully before ordering. Confirm speaker depth, mounting diameter, pod clearance, grille clearance, wiring path, impedance, amplifier compatibility, and final system layout before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, Road King, and custom bagger applications may require custom pods, adapter rings, fabrication, or system planning depending on the exact bike and speaker location. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker size, amplifier power, DSP plan, wiring, and installation parts. These related collections help match the Cicada CHX8 with the right Harley audio upgrade path. Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop pro coaxial motorcycle speakers for Harley bagger audio Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CHX8 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker size, impedance, amplifier power, DSP, wiring, fabrication needs, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleDB Drive Euphoria XPERT EX6NCD-CFV2 6.5″ 2-Way Loudspeakers
Vendor:DB DriveDB Drive XPERT 6.5" 2-Way NEO Carbon Fiber Loudspeakers EX6NCD-CFV2 (Pair) Built for serious high-output sound systems, the DB Drive Xpert EX6NCD-CFV2 combines competition-level performance with exceptional clarity and durability. The included 12dB passive crossover ensures clean frequency separation, while the custom aluminum basket with radial venting improves cooling and long-term reliability. Features 2.0" (51mm) Voice Coil Neodymium M-Ring Magnet Assembly Optimized for High Output SQ Sound Systems Rear-Mounted Full-Sized Compression Driver Weather-Resistant Carbon Fiber Cone with Cloth Surround Custom Aluminum Basket with Radial Venting 1.4"(36mm) Polyester Tweeter Diaphragm Wide Dispersion Conical HF Waveguide 12dB Passive Crossover Included Protective Grills Included Specifications Impedance: 3Ω Power Handling: 400W Dynamic Wattage: 800W Resonant Frequency: (fs) 92.1 Hz Sensitivity (1w/1M): 106.1 dB Voice Coil: 2.0" Overall Diameter: 6.52" Cutout Diameter: 5.49" Mounting Depth: 2.72" Dimensions Overall Diameter: 6.85"/ 174 mm Cutout Diameter: 5.49"/ 139.43 mm Mounting Depth: 3.44"/ 87.30 mmSale -
SaleDB Drive Euphoria XPERT EX8SNCD-CF 8″ 2-Way Loudspeaker
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. 8” 2-WAY CARBON FIBER LOUDSPEAKERwith Backloaded Compression Driver Features Neodymium Magnet Assembly Rear Mounted Full Sized Compression Driver IP54 Rated Weather Resistant Carbon Fiber Cone with Rubber Surround Stamped Steel Basket with Radial Venting 1.4”(36mm) Polyester Tweeter Diaphragm Wide Dispersion Conical HF Waveguide 12dB Passive Crossover Included Protective Grills Included Specifications Nominal Impedance 4Ω Power Handling 450 Watts Dynamic Wattage 900 Watts Freq Response 80hZ-20kHz Sensitivity (1w/1M) 86.2 DB Voice Coil Diameter 2" Res Freq 76.2 HZSale -
SaleDB Drive EX8NCD Euphoria XPERT 8″ Pro Coaxial Speaker
Vendor:DB DriveEX8NCD 8″ 2-Way Loudspeaker With Backloaded Compression Driver Early on, we have been committed to innovation in all things involving car audio. Experience the passion through audio designed and engineered for that moment you want to raise the bar and set the mood. Features 2″ (51mm) Midrange Voice Coil Neodymium Ring Magnet Assembly Rear Mounted Full Sized Compression Driver IP52 Rateed Paper Cone With Treated Cloth Surround Die-Cast Aluminum Basket With Radial Venting 1.4″ (36mm) Polyester Tweeter Diaphragm Wide Dispersion Conical HF Waveguide 12dB Passive Crossover Included Protective Grills Included Sold in pairs All weather Specifications Nominal Impedance 5.2Ω Power Handling 400 Watts Dynamic Wattage 800 Watts Freq Response 80hZ-20kHz Sensitivity (1w/1M) 105.7 DB Voice Coil Diameter 2"Sale -
DB Drive EX8NMB-CFX2 8" Neo Carbon Fiber 2-Way Midbass
Vendor:DB DriveDB Drive EX8NMB-CFX2 8" Neo Carbon Fiber 2-Way Midbass EX8NMB-CFX2 is an 8" Neo Carbon Fiber 2-way midbass set designed for high-output systems. It uses a lightweight neodymium ring magnet, a 2.0" midrange voice coil, and an IP65 carbon fiber cone in a die-cast basket. Combined frequency response: 50Hz–17kHz LF power handling: 300W AES / 600W dynamic HF power handling: 15W AES / 30W dynamic Sensitivity: HF 99.3dB, LF 91.3dB (1W/1m) Nominal impedance: 4Ω Sold in pairs -
DB Drive WDX6MOTO-CD (pairs)
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. Specifications Max Power 500 watts Nominal Power 250 watts Freq Response 90-18000 Impedance 4Ω Sensitivity 102.7db 6.5″ High Efficiency 2-way Loudspeaker 1″ Aluminum Compression Style Tweeter Element Rated Cone Design Bi-Ribbed Treated Cloth Surround 1.5″ High Output Til Midrange Voice Protective Grill Included Dimensions Depth 3.08" Cutout Diameter 5.67" -
SaleDiamond Audio MS652NEO 6.5" 2-Way Coaxial Neo Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio MS652NEO 6.5" Pro Coaxial Neo Speakers — 2Ω or 4Ω The Diamond Audio MS652NEO is a 6.5-inch horn-loaded pro coaxial speaker designed for serious motorcycle, marine, powersports, and high-output vehicle audio systems. Its combination of a carbon-fiber cone, PEN high-frequency diaphragm, neodymium motor structure, and cast-aluminum basket is engineered to produce strong projection and clean output in demanding open-air environments. Available in 2-ohm and 4-ohm versions, the MS652NEO delivers 200 watts RMS of power handling with a dual-voice-coil, bi-ampable architecture that gives system builders additional flexibility when configuring amplification and DSP control. THE REFERENCE STANDARD 6.5" Pro Coaxial Output Built for the Highway Horn-loaded high-frequency projection, carbon-fiber midrange performance, and efficient neodymium motor technology for serious motorcycle audio systems. Start a Build Consultation Call 864-334-6131 Diamond Audio MS652NEO Key Specifications Series MS NEO Speaker Size 6.5 inches Speaker Type 2-Way Horn-Loaded Pro Coaxial 2Ω Model MS652NEO2 4Ω Model MS652NEO4 Power Handling 200W RMS / 400W MAX Sensitivity 93 dB (1W/1M) Voice Coil Configuration Dual Voice Coil Bi-Ampable Yes Field-Serviceable Voice Coil Yes Voice Coil Diameter 2 inches Cone Material Carbon Fiber High-Frequency Diaphragm PEN — Polyethylene Naphthalate Motor Neodymium Basket Cast Aluminum Surround Rubber Re 3.2Ω Qms 10.357 Qes 0.67 Qts 0.629 Fs 151 Hz Vas 2.756 L Cms 0.094 mm/N Mms 11.728 g Sd 143.14 cm² BL 7.289 T·m Xmax 1.2 mm Mounting Depth 3.43″ (87.13 mm) Cutout Diameter 5.63″ (143 mm) Overall Diameter 6.65″ (169 mm) Overall Height 3.79″ (96.33 mm) Fitment warning: These are high-output 6.5-inch pro coaxial speakers and are not a universal drop-in replacement. Verify cutout diameter, mounting depth, motor clearance, grille clearance, amplifier power, impedance, and complete system layout before ordering. 200W RMS High-Output Pro Coaxial Performance The MS652NEO is designed for motorcycle audio systems where a traditional automotive coaxial speaker may not provide enough output or projection. Its horn-loaded architecture increases high-frequency efficiency while the carbon-fiber cone handles the midrange and midbass frequencies required for strong open-air performance. Diamond Audio's formal technical specifications rate the MS652NEO platform at 200 watts RMS and 400 watts maximum power. Horn-Loaded Coaxial Architecture The high-frequency driver is positioned within the same overall speaker platform as the 6.5-inch cone, creating a compact coaxial system capable of delivering both midrange and high-frequency output from one mounting location. The horn-loaded high-frequency section is designed to improve projection so vocals, cymbals, guitars, and other upper-frequency information remain audible against wind, road, engine, and exhaust noise. Carbon-Fiber Cone and Neodymium Motor Diamond Audio uses a rigid carbon-fiber cone to provide a strong, lightweight moving surface capable of maintaining control at elevated playback levels. The neodymium motor provides high magnetic strength while reducing the size and weight associated with conventional ferrite magnet structures, making the platform particularly useful for motorcycle and powersports installations. PEN High-Frequency Diaphragm High-frequency reproduction is handled by a PEN — polyethylene naphthalate — diaphragm. Combined with the horn-loaded architecture, this design is intended to provide clean, efficient high-frequency output with strong forward projection. Choose 2Ω or 4Ω The MS652NEO is available in separate 2-ohm and 4-ohm configurations. The correct version should be selected based on amplifier output, number of speakers, channel configuration, wiring method, and final impedance presented to the amplifier. 2Ω — MS652NEO2 The 2-ohm version is suited to systems where the amplifier and channel configuration are designed to operate at a lower impedance and provide increased available power. 4Ω — MS652NEO4 The 4-ohm version provides greater flexibility for multi-speaker wiring and amplifier configurations where a higher final impedance is required. Dual Voice Coil and Bi-Amp Capability The MS652NEO uses a dual-voice-coil, bi-ampable architecture. This allows advanced system builders to configure the speaker differently depending on amplifier channel availability and DSP strategy. A properly designed bi-amped system can provide independent amplification and signal processing for different sections of the coaxial platform, allowing greater control over crossover points, output level, EQ, and time alignment. System-design note: Bi-amp capability does not mean the speaker must be bi-amped. Wiring, amplifier channels, crossover configuration, and DSP settings must be planned around the complete system and the selected 2Ω or 4Ω version. Cast-Aluminum Basket and Field-Serviceable Design The rigid cast-aluminum basket provides structural support and helps resist flex and vibration during high-output operation. Diamond Audio also specifies a field-serviceable voice-coil design, adding serviceability for demanding custom motorcycle, marine, and powersports systems. Built for Motorcycle and Powersports Audio With its compact 6.5-inch format, high-output architecture, and 3.43-inch mounting depth, the MS652NEO is suited to a wide range of custom motorcycle and powersports speaker locations where adequate physical clearance is available. Harley-Davidson custom audio systems. Road Glide and Street Glide fairing applications. Custom lower speaker pods. Saddlebag speaker installations. Tour-pack speaker locations. Custom fabricated speaker panels. Marine and powersports applications. Slingshot and UTV audio systems. Installation and Tuning Notes Select the 2Ω or 4Ω model based on amplifier loading and complete system design. Verify amplifier RMS output at the selected impedance. Confirm the 5.63-inch mounting cutout before modifying any factory or aftermarket panel. Verify the complete 3.43-inch mounting depth and rear motor clearance. Confirm the 6.65-inch overall diameter and grille clearance before final assembly. Determine whether the speaker will be conventionally powered or bi-amped before wiring. Use appropriate crossover protection based on amplifier power, installation location, and system goals. Secure all speaker mounting hardware for motorcycle vibration. Protect wiring and terminals from moisture, abrasion, heat, and moving components. Complete final DSP, EQ, crossover, and level tuning after the full system is installed. Diamond Audio MS NEO Coaxial Specifications Review the Diamond Audio MS NEO coaxial technical information before installation and system configuration. View MS NEO Coaxial Specifications Need Help Choosing 2Ω or 4Ω? The correct impedance depends on amplifier output, number of speakers, channel configuration, wiring method, DSP strategy, and the complete system design. Garage Bagger Stereo can help determine the correct MS652NEO version for your system. Start a Build Consultation Call 864-334-6131Sale -
SaleDiamond Audio MS652NEOS 6.5" 2-Way Coaxial Shallow Mount Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio MS652NEOS 6.5" Shallow-Mount Pro Coaxial Speakers — 2Ω or 4Ω The Diamond Audio MS652NEOS is the shallow-mount version of Diamond Audio's high-output 6.5-inch MS NEO pro coaxial platform. Built for motorcycle, powersports, marine, and custom audio systems where mounting depth is limited, it combines horn-loaded high-frequency projection with a rigid carbon-fiber cone and lightweight neodymium motor structure. Available in 2-ohm and 4-ohm versions, the MS652NEOS is rated at 200 watts RMS and uses a dual-voice-coil, bi-ampable architecture for advanced amplifier and DSP system configurations. THE REFERENCE STANDARD Pro Coaxial Output in a 2.74" Shallow-Mount Package Designed for tight fairings, pods, doors, and custom motorcycle installations where a full-depth 6.5-inch pro coaxial will not fit. Start a Build Consultation Call 864-334-6131 Diamond Audio MS652NEOS Key Specifications Series MS NEO Shallow Mount Speaker Size 6.5 inches Speaker Type 2-Way Horn-Loaded Pro Coaxial 2Ω Model MS652NEO2S 4Ω Model MS652NEO4S Power Handling 200W RMS / 400W MAX Sensitivity 93 dB (1W/1M) Voice Coil Configuration Dual Voice Coil Bi-Ampable Yes Field-Serviceable Voice Coil Yes Voice Coil Diameter 2 inches Cone Material Carbon Fiber High-Frequency Diaphragm PEN — Polyethylene Naphthalate Motor Neodymium Basket Cast Aluminum Surround Rubber Fs 151 Hz Mounting Depth 2.74″ (69.50 mm) Cutout Diameter 5.63″ (143 mm) Overall Diameter 6.29″ (159.68 mm) Overall Height 3.38″ (85.9 mm) Fitment warning: Shallow mount does not mean universal fitment. Verify the 5.63-inch cutout, 2.74-inch mounting depth, basket clearance, grille clearance, amplifier power, impedance, and complete system layout before ordering. 2.74" Shallow-Mount Pro Coaxial Design The biggest advantage of the MS652NEOS is its reduced installation depth. At only 2.74 inches deep, it gives system builders additional clearance in motorcycle fairings, factory speaker locations, shallow pods, doors, and custom enclosures where the standard-depth MS652NEO may not fit. The shallower chassis retains the core MS NEO architecture instead of moving to a conventional low-output automotive coaxial design. 200W RMS High-Output Pro Coaxial Performance The MS652NEOS is designed for open-air systems where projection and efficiency are critical. Diamond Audio rates the shallow-mount platform at 200 watts RMS, providing substantial power handling from a compact 6.5-inch driver. Its horn-loaded coaxial architecture helps maintain midrange and high-frequency presence against wind, road, engine, and exhaust noise. Carbon-Fiber Cone and Neodymium Motor The carbon-fiber cone provides a rigid, lightweight moving surface designed for responsive midrange and controlled midbass output at elevated playback levels. A high-efficiency neodymium motor provides strong magnetic force while helping Diamond Audio reduce the overall depth and weight of the speaker assembly. Horn-Loaded PEN High-Frequency Driver The MS652NEOS uses a PEN — polyethylene naphthalate — high-frequency diaphragm integrated into its horn-loaded coaxial architecture. The horn increases acoustic projection and efficiency, helping vocals and high-frequency information remain clear in motorcycle and other open-air listening environments. Choose 2Ω or 4Ω The MS652NEOS is available in separate 2-ohm and 4-ohm models. The correct impedance should be selected around the amplifier's output, number of speakers, channel configuration, wiring method, and final load presented to the amplifier. 2Ω — MS652NEO2S The 2-ohm shallow model is suited to systems designed to take advantage of increased amplifier output at a lower channel impedance. 4Ω — MS652NEO4S The 4-ohm shallow model provides additional flexibility for multi-speaker wiring and amplifier configurations requiring a higher final load. Dual Voice Coil and Bi-Amp Capability The MS652NEOS uses a dual-voice-coil, bi-ampable architecture that allows advanced system builders to configure amplification and DSP control around the needs of the complete system. In a properly designed bi-amped configuration, amplifier and DSP channels can provide more independent control over crossover, output level, EQ, and timing. System-design note: Bi-amp capability does not mean the speaker must be bi-amped. Wiring, amplifier channels, DSP configuration, and crossover strategy should be planned around the entire system. Built for Motorcycle and Powersports Installations The reduced mounting depth makes the MS652NEOS particularly useful in motorcycle installations where fairing, pod, enclosure, or factory-panel clearance limits the use of deeper high-output speakers. Harley-Davidson fairing speaker locations. Road Glide and Street Glide custom audio systems. Shallow lower-pod installations. Tour-pack speaker locations. Custom saddlebag speaker panels. Limited-depth fabricated enclosures. Slingshot and UTV audio systems. Marine and powersports installations. Standard MS652NEO vs MS652NEOS Shallow Mount MS652NEO Standard Depth 3.43″ MS652NEOS Shallow Depth 2.74″ Depth Reduction Approximately 0.69″ MS652NEOS Cutout 5.63″ MS652NEOS Overall Diameter 6.29″ Choose the shallow MS652NEOS when available mounting depth is the limiting factor. Do not assume the shallow version and standard version have identical external dimensions. Installation and Tuning Notes Select the 2Ω or 4Ω version based on amplifier loading and complete system design. Verify amplifier RMS output at the selected impedance. Confirm the 5.63-inch mounting cutout before modifying any panel. Verify the full 2.74-inch mounting depth and rear clearance. Confirm the 6.29-inch overall diameter and grille clearance. Determine whether the speaker will be conventionally powered or bi-amped before wiring. Use appropriate crossover protection based on amplifier power and installation location. Secure mounting hardware for motorcycle vibration. Protect wiring and terminals from moisture, heat, abrasion, and moving components. Complete final DSP, EQ, crossover, level, and time-alignment tuning after the system is installed. Diamond Audio MS NEO Coaxial Specifications Review the Diamond Audio MS NEO coaxial technical information before installation and system configuration. View MS NEO Coaxial Specifications Need Help Choosing the Correct MS NEO? The right speaker depends on mounting depth, amplifier output, impedance, number of speakers, wiring configuration, and DSP strategy. Garage Bagger Stereo can help determine whether the standard-depth or shallow MS652NEO platform is the better fit for your system. Start a Build Consultation Call 864-334-6131Sale -
SaleDiamond Audio MS692NEO 6x9" 2-Way Coaxial Neo Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio MS692NEO 6x9" Pro Coaxial Neo Speakers — 2Ω or 4Ω The Diamond Audio MS692NEO is a high-output 6x9-inch horn-loaded pro coaxial speaker built for serious motorcycle, powersports, marine, and custom audio systems. Its large carbon-fiber cone, PEN high-frequency diaphragm, neodymium motor structure, and cast-aluminum basket are designed to deliver strong projection and clean output in demanding open-air environments. Available in 2-ohm and 4-ohm versions, the MS692NEO is rated at 200 watts RMS and uses a dual-voice-coil, bi-ampable architecture for advanced amplifier and DSP configurations. THE REFERENCE STANDARD 6x9" Pro Coaxial Output for High-Power Bagger Systems Built for saddlebag lids, custom rear speaker locations, and high-output motorcycle systems where projection, durability, and amplifier efficiency matter. Start a Build Consultation Call 864-334-6131 Diamond Audio MS692NEO Key Specifications Series MS NEO Speaker Size 6x9 inches Speaker Type 2-Way Horn-Loaded Pro Coaxial 2Ω Model MS692NEO2 4Ω Model MS692NEO4 Power Handling 200W RMS / 400W MAX Sensitivity 94 dB (1W/1M) Voice Coil Configuration Dual Voice Coil Bi-Ampable Yes Field-Serviceable Voice Coil Yes Voice Coil Diameter 2 inches Cone Material Carbon Fiber High-Frequency Diaphragm PEN — Polyethylene Naphthalate Motor Neodymium Basket Cast Aluminum Surround Rubber Re 3.2Ω Qms 7.368 Qes 0.597 Qts 0.552 Fs 104 Hz Vas 9 L Cms 0.148 mm/N Mms 15.6 g Sd 206.84 cm² BL 7.418 T·m Xmax 1.2 mm Mounting Depth 3.74″ (95 mm) Cutout Dimensions 8.58″ x 5.75″ (218 mm x 146 mm) Overall Dimensions 9.19″ x 6.38″ (233.5 mm x 162 mm) Overall Height 4.08″ (103.7 mm) Fitment warning: These are high-output 6x9-inch pro coaxial speakers and are not a universal drop-in replacement. Verify cutout dimensions, mounting depth, basket clearance, grille clearance, amplifier power, impedance, and complete system layout before ordering. 200W RMS 6x9" Pro Coaxial Performance The MS692NEO is designed for motorcycle audio systems where a conventional automotive 6x9 cannot provide enough projection or output. Its horn-loaded architecture increases high-frequency efficiency while the large carbon-fiber cone provides strong midrange and midbass performance. Diamond Audio's formal technical specifications rate the MS692NEO platform at 200 watts RMS and 400 watts maximum power. Built for Saddlebag and Rear Speaker Applications The 6x9 format makes the MS692NEO especially useful in Harley-Davidson saddlebag lid systems, cut-in lid conversions, custom rear speaker panels, and other fabricated locations where a high-output 6x9 pro coaxial is required. Diamond Audio also uses the MS692NEO platform in dedicated Harley-Davidson cut-in lid kits, reinforcing its intended role in high-output bagger systems. :contentReference[oaicite:1]{index=1} Carbon-Fiber Cone and Neodymium Motor The MS692NEO uses a rigid carbon-fiber cone to provide a strong, lightweight moving surface capable of maintaining control at elevated playback levels. The neodymium motor provides high magnetic strength while helping reduce overall speaker weight and motor bulk compared with conventional ferrite designs. Horn-Loaded PEN High-Frequency Driver High-frequency reproduction is handled by a PEN — polyethylene naphthalate — diaphragm incorporated into the horn-loaded coaxial architecture. The horn improves acoustic projection and efficiency, helping vocals, percussion, guitars, and upper-frequency information remain audible at highway speeds and in other open-air environments. Choose 2Ω or 4Ω The MS692NEO is available in separate 2-ohm and 4-ohm models. The correct impedance should be chosen around amplifier output, number of speakers, wiring configuration, and final load presented to each amplifier channel. 2Ω — MS692NEO2 The 2-ohm version is designed for systems that can take advantage of increased amplifier output at a lower channel impedance. 4Ω — MS692NEO4 The 4-ohm version provides additional flexibility for multi-speaker wiring and amplifier configurations requiring a higher final impedance. Dual Voice Coil and Bi-Amp Capability The MS692NEO uses a dual-voice-coil, bi-ampable architecture that allows more advanced amplifier and DSP system configurations. In a properly designed bi-amped setup, the system can provide greater control over crossover points, level, EQ, and timing than a conventional single-input coaxial configuration. System-design note: Bi-amp capability does not mean the speaker must be bi-amped. Amplifier channels, DSP configuration, crossover strategy, and wiring should be planned around the complete system. Cast-Aluminum Basket and Serviceable Design Diamond Audio uses a rigid cast-aluminum basket to support the speaker assembly and resist flex and vibration during high-output operation. The MS692NEO also uses a field-serviceable voice-coil design, providing additional serviceability for high-performance motorcycle, marine, and powersports systems. Motorcycle Audio Applications Harley-Davidson saddlebag lid speaker systems. Cut-in saddlebag lid conversions. Road Glide and Street Glide rear speaker systems. Custom 6x9 speaker panels. Tour-pack and fabricated rear speaker locations. Marine audio systems. Slingshot, UTV, and powersports installations. Custom vehicle audio systems requiring high-output 6x9 coaxials. Installation and Tuning Notes Select the 2Ω or 4Ω model based on amplifier loading and complete system design. Verify amplifier RMS output at the selected impedance. Confirm the 8.58″ x 5.75″ mounting cutout before modifying saddlebag lids or panels. Verify the full 3.74-inch mounting depth and rear motor clearance. Confirm the 9.19″ x 6.38″ overall frame dimensions and grille clearance. Determine whether the speaker will be conventionally powered or bi-amped before wiring. Use appropriate crossover protection for the installed power level and application. Secure all mounting hardware for motorcycle vibration. Protect terminals and wiring from moisture, abrasion, heat, and moving components. Complete final DSP, EQ, crossover, level, and time-alignment tuning after installation. Need Help Choosing 2Ω or 4Ω? The correct MS692NEO version depends on amplifier output, number of speakers, channel configuration, wiring method, DSP strategy, and complete system design. Garage Bagger Stereo can help determine the correct impedance and amplifier configuration before you order. Start a Build Consultation Call 864-334-6131Sale -
SaleDiamond Audio MS82NEO 8" 2-Way Coaxial Neo Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio MS82NEO 8" Pro Coaxial Neo Speakers — 2Ω or 4Ω The Diamond Audio MS82NEO is an 8-inch high-output horn-loaded pro coaxial speaker built for serious motorcycle, marine, and powersports audio systems. Designed to project clean, aggressive output in open-air environments, the MS82NEO combines a rigid carbon-fiber cone, PEN high-frequency diaphragm, neodymium motor structure, and cast-aluminum basket in a purpose-built high-performance platform. Available in 2-ohm and 4-ohm versions and sold in pairs, the MS82NEO is rated at 300 watts RMS / 900 watts MAX per pair and features a dual-voice-coil, bi-ampable design for advanced amplifier and DSP system configurations. THE REFERENCE STANDARD 8" Pro Coaxial Output for Serious Motorcycle Audio High-efficiency neodymium motors, carbon-fiber cones, horn-loaded high-frequency output, and bi-amp capability make the MS82NEO a serious option for high-output bagger systems. Start a Build Consultation Call 864-334-6131 Diamond Audio MS82NEO Key Specifications Series MS NEO Speaker Size 8 inches Speaker Type 2-Way Horn-Loaded Pro Coaxial 2Ω Model MS82NEO2 4Ω Model MS82NEO4 Sold Pair Power Handling 300W RMS / 900W MAX per pair Voice Coil Configuration Dual Voice Coil Bi-Ampable Yes Field-Serviceable Voice Coil Yes Cone Material Carbon Fiber High-Frequency Diaphragm PEN (Polyethylene Naphthalate) Motor Neodymium Basket Cast Aluminum Surround Rubber Voice Coil Diameter 2 inches Mounting Depth 3.80″ (96.5 mm) Cutout Diameter 7.01″ (178 mm) Overall Diameter 8.27″ (210 mm) Overall Height 4.16″ (105.7 mm) Fitment warning: These are high-output 8-inch pro coaxial speakers and are not a universal drop-in replacement. Verify cutout diameter, mounting depth, motor clearance, grille clearance, amplifier power, impedance, and complete system layout before ordering. 300W RMS High-Output Pro Coaxial Performance Diamond Audio designed the MS82NEO for systems where conventional coaxial speakers do not provide enough output or projection. The horn-loaded two-way architecture is engineered to maintain strong midrange and high-frequency presence in open-air environments where wind, road, engine, and exhaust noise can overwhelm traditional speakers. Diamond currently rates both the 2-ohm MS82NEO2 and 4-ohm MS82NEO4 at 300 watts RMS / 900 watts maximum per pair. Carbon-Fiber Cone and Neodymium Motor The MS82NEO uses a rigid carbon-fiber cone designed for fast response, strong midrange output, and controlled midbass performance at elevated volume levels. A high-efficiency neodymium motor structure provides the magnetic strength required for serious output while reducing the weight and physical bulk associated with conventional ferrite motors. Horn-Loaded PEN High-Frequency Driver High-frequency reproduction is handled by a horn-loaded driver using a PEN — polyethylene naphthalate — diaphragm. The horn architecture increases projection and efficiency, helping high-frequency information remain present at highway speeds and in other demanding open-air environments. The MS82NEO is designed as a true high-output coaxial platform rather than a conventional automotive-style coaxial speaker. Choose 2Ω or 4Ω The MS82NEO is available in separate 2-ohm and 4-ohm configurations so the speaker load can be matched correctly to the amplifier, number of speakers, wiring layout, and complete audio system. 2Ω — MS82NEO2 The 2-ohm version is designed for systems where the amplifier and channel configuration are optimized around a lower-impedance load and increased available output. 4Ω — MS82NEO4 The 4-ohm version provides additional flexibility for multi-speaker wiring, bridged amplifier configurations, and systems requiring a higher final impedance. Dual Voice Coil and Bi-Amp Capability Unlike a basic coaxial speaker with a single shared input, the MS82NEO uses a dual-voice-coil, bi-ampable architecture. This provides advanced system builders with additional control over how the speaker is powered and tuned. In properly designed systems, bi-amping can provide independent amplifier and DSP control over different sections of the coaxial platform for more precise crossover, level, EQ, and time-alignment control. System-design note: Bi-amp capability does not mean the speaker must be bi-amped. Wiring and amplifier configuration should be determined by the complete system design, amplifier channels, DSP configuration, and selected 2Ω or 4Ω model. Cast-Aluminum Basket and Field-Serviceable Design The MS82NEO uses a rigid cast-aluminum basket designed to resist flex and vibration under high-output operation. This construction is particularly useful in motorcycle and powersports systems where speaker assemblies are exposed to significant mechanical vibration. Diamond Audio also specifies a field-serviceable voice-coil design, allowing service of critical speaker components without automatically replacing the complete driver assembly. Built for Motorcycle, Marine and Powersports Audio The Diamond Audio MS NEO Series is designed for high-output applications where speaker efficiency, physical size, durability, and projection all matter. The MS82NEO is particularly well suited to custom motorcycle and powersports systems that can accommodate its 8-inch frame and 3.80-inch mounting depth. Harley-Davidson custom audio systems. Road Glide and Street Glide custom speaker installations. Custom saddlebag speaker installations. Tour-pack and fabricated rear speaker locations. Custom fairing and lower-pod applications. Marine audio systems. UTV, Slingshot, and other powersports installations. Installation and Tuning Notes Select the 2Ω or 4Ω version based on amplifier loading and complete system design. Verify amplifier RMS output at the selected speaker impedance. Confirm the 7.01-inch mounting cutout before modifying factory or aftermarket panels. Verify the full 3.80-inch mounting depth and rear motor clearance. Confirm overall 8.27-inch diameter and grille clearance before final assembly. Determine whether the speaker will be conventionally powered or bi-amped before wiring. Use appropriate crossover protection based on the installed power and system configuration. Secure all mounting hardware for motorcycle and powersports vibration. Complete final DSP, crossover, EQ, and level tuning after the entire system is installed. Diamond Audio MS NEO Coaxial Manual Review the Diamond Audio MS NEO coaxial technical information before installation and system configuration. View MS NEO Coaxial Specifications Need Help Choosing 2Ω or 4Ω? The correct MS82NEO version depends on amplifier output, number of speakers, channel configuration, wiring method, DSP strategy, and the complete system design. Garage Bagger Stereo can help determine the correct impedance and amplifier configuration before you order. Start a Build Consultation Call 864-334-6131Sale
