Marine Subwoofers 10"
10" marine subwoofers at Garage Bagger Stereo: Wet Sounds REVO and STEALTH, DS18 Hydro NXL, Rockford Fosgate M2 DVC and Kicker KM Freeair and MWE.
A 10" marine subwoofer is a common choice for deep bass on a boat. Decide between free air (infinite baffle), a sub for an enclosure, or an active enclosure, then match impedance and RMS power to your amplifier.
- Wet Sounds REVO 10 FA and REVO 10 HP free air and high power subs
- Wet Sounds STEALTH AS-10 active enclosure
- Rockford Fosgate M2 10" DVC and Kicker KM 10" Freeair
10" Marine Subwoofers
The most popular size, in free air, infinite baffle, boxed and active versions.
- DS18 NXL-10SUB: 300W RMS, 4Ω, IP65
- Rockford Fosgate M2 10": 400W RMS, IPX6
- Wet Sounds REVO 10 FA V2 and HP S4-B V2
Browse Collections
-
SaleDB Drive Xpert EXFW10NCF 10" Shallow Subwoofer
Vendor:DB DriveThe DB Drive XPERT EXFW10NCF is a 10" shallow-mount NEO carbon fiber subwoofer with a dual 4 ohm voice coil, sold as a single. The shallow basket helps in installs with limited depth.Key Specs Carbon fiber cone, rubber surround, weather resistant cone and surround 2.5" (63.5mm) voice coil, dual 4 ohm (3.6 + 3.6 ohm) Power handling: 400W, dynamic 1000W Sensitivity: 84.4dB (1W/1m); resonant frequency 35.813Hz Mounting depth 3.54"; cutout diameter 9.32" Suggested enclosure: sealed 0.55 cu ft, vented 0.67 cu ft Fitment and Installation NotesRings are needed to install. Confirm the 3.54" depth and 9.32" cutout for your enclosure.Browse more motorcycle subwoofers and motorcycle amplifiers, or get a custom build planned around your bike.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleDB Drive Xpert EXW10CF 10" Dual 2-Ohm Carbon Fiber Subwoofer
Vendor:DB DriveThe DB Drive XPERT EXW10CF is a 10" dual 2 ohm carbon fiber subwoofer with a ferrite magnet and a 3" voice coil, sold as a single.Key Specs Carbon fiber cone, foam surround, die-cast aluminum basket 3" voice coil, dual 2 ohm 8-layer (1.8 + 1.8 ohm) Ferrite magnet; large-gauge compression terminals; PVC gasket Power handling: 1000W, dynamic 2000W Sensitivity: 83.1dB (1W/1m) Fitment and Installation NotesRings are needed to install this 10" subwoofer.Browse more motorcycle subwoofers and motorcycle amplifiers, or get a custom build planned around your bike.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
DS18 Hydro NXL-10SUB 10" Marine Subwoofer
Vendor:DS18Marine Subwoofer with Integrated RGB Lights Highlights DS18 Hydro design to withstand extreme elements and keep you playing. RGB LED design to brighten up your system through the night all while displaying whatever color you want with our (sold separately) LED BTC. SPECIFICATIONS Nominal Diameter 10” Nominal Impedance 4 OHMS RMS Power Handling 300W MAX Power Handling 600W Sensitivity (1w/1m) 89dB Frequency Response 35Hz-250KHz Mounting Depth 4.98" / 126.5 mm Overall Diameter 10.75” / 273 mm Overall Height 6.71" / 170.5 mm 2 year manufacturing warranty for defects Sold as singles -
DS18 HYDRO NXL-10SUBLD 10" Marine & Motorsports Subwoofer Box
Vendor:DS18Marine & Motorsports Subwoofer Box Loaded with Integrated RGB Lights Highlights 10" Passive Radiation for Bass Boost 350W RMS/ 700W MAX 100% UV Stable IP65 Marine Grade Compliant Specifications Polyethylene Plastic Box Waterproof Integrated RGB Lighting Compatible with DS18 LED-BTC or any other RF/BT/Wifi Controller for Multi-Function RGB LED Lighting (Sold Separately) Motor Structure uses Y35 Ferrite Magnet SPECIFICATIONS Nominal Diameter 10” Nominal Impedance 4 OHMS RMS Power Handling 350W MAX Power Handling 700W Sensitivity (1w/1m) 87dB Frequency Response 35Hz-1.2KHz Voice Coil Diameter 2” / 50.8 mm 2 year manufacturing warranty for defects Sold as singles -
Elite Sounds ES1250 10" 1250W RMS D4/D2 Bagger Subwoofer
Vendor:Elite Sounds AudioThe Elite Sounds ES1250-3W-10D4 is a 10-inch dual 4-ohm subwoofer designed for fiberglass bagger audio systems. It is intended for properly designed ported saddlebag enclosures.Key Specs 10-inch subwoofer, dual 4 ohm voice coils Ported bag enclosure required Water-resistant paper cone with carbon fiber dust cap Push terminals Manufacturer tuning range 40-500 Hz Fitment and Installation NotesMatch amplifier power, enclosure volume, port area and tuning to the build, and confirm physical clearances before fabrication.Related: motorcycle subwoofers, motorcycle amplifiers, or get a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Hertz MPS 250 S2 10" 2Ω Mille PRO Shallow Subwoofer
Vendor:HertzThe Hertz MPS 250 S2 is a shallow 10" 2 ohm Mille PRO subwoofer for builds where mounting depth is limited, including custom bagger saddlebag installs.Key Specs Size: 10" (250 mm), 2 ohm single voice coil Power handling: 500W continuous, 1000W peak Voice coil: 38 mm (1.5") six-layer copper Mounting depth: 3.25" (82.6 mm) Metal grille included Fitment and Installation NotesVerify available mounting depth and enclosure volume before building, and match the 2 ohm impedance to your amplifier.Related: Motorcycle Subwoofers and Hertz. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Kicker 10" CompRT All Weather Ultra Thin Subwoofer
Vendor:KickerThe Kicker 10 inch CompRT All Weather Ultra Thin Subwoofer is a shallow-mount dual voice coil sub available in 2 ohm or 4 ohm, sold individually.Key Specs Dual voice coils, 2 ohm or 4 ohm; 400 W RMS, 800 W peak Sensitivity 84.8 dB; frequency response 25-500 Hz Mounting depth 3-7/16 in; mounting diameter 9-1/8 in Polypropylene cone with Santoprene surround, UV resistant Sealed box 0.4-1.25 cu ft; vented box 1.25-1.75 cu ft Grille not included; box includes sticker, four adhesive screw covers, manual and template Browse more subwoofers and Kicker, or ask about a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Kicker 10" MWE Marine Subwoofer (4Ω)
Vendor:KickerKICKER All Weather 10" MWE Marine Subwoofer for Enclosures (4Ω) KICKER M-Class Premium products feature key moisture-deterring characteristics that set them apart as a true product line built to use in the outdoors. It’s all REAL MARINE™. Features: The MWE Subwoofer is designed for use in a sealed or vented enclosure for tight, most accurate bass Utilizes a carbon-fiber-infused poly-cone co-molded to a tough TPE surround for a solid balance of durability and resonance control Glass-filled nylon basket frames for excellent thermal performance and toughness Corrosion-resistant, water-proof connectors for speakers and lighting Equipped with RGBW LED lighting for endless colors Includes a charcoal grille (the MWGW white grille is available and sold separately) KICKER REAL MARINE™ designed specifically for marine environments with marine-compliant terminals, splash-and-spray resistance, and more Meets or exceeds ASTM standards for UV and salt/fog exposure (ASTM B117 200 hr. salt/fog test and ASTM G154 400 hr. accelerated UV test) sold in singles Specs: Rated Impedance (Ohms) - 4Ω Rec Amp Power (watts RMS) - 200W RMS - 400W RMS Peak Power Handling (watts) - 800W Freq Resp (Hz) - 20Hz-500Hz Model # - 51MWE104 -
Kicker 10" Solo-Baric L7S
Vendor:KickerThe Kicker 10 inch Solo-Baric L7S is a dual voice coil subwoofer rated at 600 watts RMS and 1,200 watts peak. This listing's Kicker specs are for the 4 ohm dual voice coil model.Key Specs Recommended amplifier power: 600 W RMS, 1,200 W peak Sensitivity: 86.8 dB (1 W/1 m) Frequency response: 24-100 Hz Mounting depth: 6-1/4 in; square cutout 9-5/16 in Sealed enclosure: 1.0 to 1.25 cu ft Vented enclosure: 1.25 to 2.25 cu ft Dual 4-ohm voice coils Fitment and Installation NotesKicker provides a CNC cutout template for the square mounting hole.Browse more motorcycle subwoofers and motorcycle amplifiers at Garage Bagger Stereo.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Kicker KM 10" Freeair Marine Subwoofer (2Ω or 4Ω)
Vendor:KickerKICKER KM 10" Freeair Marine Subwoofer (2Ω or 4Ω) (All Weather) Features: Two-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) sold in singles Specs: Up to 175 watts RMS (350 watts peak power) Frequency response: 30-500 Hz Sensitivity: 86.27 dB Impedance: 4 or 2 ohms Mounting depth: 5" Mounting cutout diameter: 9-3/16" -
SalePRV Audio MT10SW1000-D4 10" Shallow Subwoofer
Vendor:PRV AudioPRV Audio MT10SW1000-D4 10" Shallow Subwoofer (Single) 10" Shallow Subwoofer Waterproof 1000 Watts Dual 4 Ohm Sold as singles PRV Audio is proud to present our MT10SW1000 D4 Subwoofer from the MOTO Series (MT), a high-performance line dedicated to motorsport installations. Designed for small enclosures, this subwoofer will work in motorcycle saddlebags, slingshot pods, or any other enclosure around 1 cubic foot in size. This sub is made from the best materials and components to withstand the elements, so you can enjoy the highest low-frequency output while riding or sitting in an open parking lot. Optimized for use in compact enclosures this subwoofer is ideal for motorcycle saddlebags 4-layer high-temperature copper voice coil capable of handling 1,000 watts RMS program power, which makes high acoustic output High roll U surround is attached to the cone with dual stitching allowing a generous 14 mm of Xmax for deep bass reproduction without any issues. Another Key premium components that ensure power handling, and durability at high excursion is its large 7″ premium grade spider with weaved copper tinsel lead. Side Forced Cooling System with vented back plate Design for Better Heat Dissipation Dual 4 Ohm, Dual 4 Ohm, Works well with Mini MDX2500.1 1 Ohm Connect two subs in parallel to 1 ohm Its shallow profile takes up very little space inside any enclosure. This compact design will fit and sound great in any saddlebag that has about 1 cubic foot. Recommended enclosure: Compact Sealed Box: 0.9 cubic feetCompact Ported Box: 1 cubic foot with a 3″ Diameter by 7″ Long Port Tube tuned at 45HzOptimal Ported Box: 1.25 cubic feet with a 3″ Diameter by 9″ Long Port Tube tuned at 37Hz This subwoofer established the new benchmark for low frequency for outdoor applications, making it ideal for improving the sound system in your boat, UTV, 4-wheeler, Slingshot or motorcycle. This 10-inch subwoofer delivers the kind of bass output you feel outdoors, not just vibrations.Sale -
Rockford Fosgate M2 10" DVC Infinite Baffle Marine Subwoofer
Vendor:Rockford Fosgate10" Infinite Baffle Marine Subwoofer The M2D4-10I Color Optix™ 10” DVC 2-Ohm infinite baffle subwoofers deliver loud, clear, accurate bass, and light the way for your journey! M2 provides a customized look by using either the stainless-steel grille or the white “sport” grille insert. Specifications Size 10" Power Handling 400 RMS /1600 PEAK Voice Coil Diameter 2" Voice Coil Type Dual Voice coil Impedance 2-Ohm or 8-Ohm Switchable or 1-Ohm or 4-Ohm Switchable Crossover 12dB/Octave Sensitivity 94DB Freq Response 20Hz- 750Hz Cutout Diameter 8.87" (225.3 mm) Mounting Depth 4.44" (112.7 mm) Woofer Displacement 0.06 cu. ft. (1.74 Liters) FS Hz 43 Vas 30.5 Shipping Weight 13.8 Lbs. Sold as single 2-Year Warranty
Ten 10" Marine Subwoofer Options
Wet Sounds lists the REVO 10 FA V2 (2Ω or 4Ω), REVO 10 HP S4-B V2 and STEALTH AS-10 active enclosure. DS18 lists the Hydro NXL-10, NXL-10M, NXL-10SUB and NXL-10SUBLD box. Rockford Fosgate has the M2 10" DVC infinite baffle, and Kicker the KM 10" Freeair (2Ω or 4Ω) and 10" MWE (4Ω).
Verified Specifications
| DS18 NXL-10SUB/BK | 300W RMS, 4Ω, IP65, 8.78" cutout, 5" mounting depth |
| DS18 NXL-10SUBLD/BK | 350W RMS, 4Ω, IP65, passive radiator |
| Rockford Fosgate M2 10" DVC | 400W RMS, IPX6, 8.98" cutout, 4.70" mounting depth |
From DS18 and Rockford Fosgate product pages.
Choosing Between Them
Measure the cutout and mounting depth first. Choose a boxed unit like the DS18 NXL-10SUBLD or Wet Sounds STEALTH AS-10 if you do not want to build an enclosure, and a free air or infinite baffle model if you have a baffle or sealed space. Then size the amplifier. Start a build consultation or call 864-334-6131.
Related Marine Audio Collections
Marine Subwoofers 10" FAQ
Which 10" marine subwoofers come with an enclosure?
The DS18 NXL-10SUBLD box and the Wet Sounds STEALTH AS-10 active enclosure.
What cutout does the DS18 NXL-10SUB need?
8.78" with a 5" mounting depth, per DS18.
What cutout does the Rockford Fosgate M2 10" need?
8.98" with 4.70" mounting depth, per Rockford Fosgate.
Which 10" models come in 2Ω or 4Ω?
The Wet Sounds REVO 10 FA V2 and the Kicker KM 10" Freeair.
What power does the M2 10" handle?
Rockford Fosgate lists 400W RMS and 1600W peak.
Need Help Choosing 10" Marine Subwoofers?
Tell us about your boat, your amplifier and the speaker or subwoofer locations, and a Garage Bagger Stereo specialist will help you pick the right parts.