1998-2013 Harley Speaker Lids
Speaker lids for 1998-2013 Harley-Davidson touring motorcycles, built for rear speaker output.
THE REFERENCE STANDARD
Build It Right the First Time
Not sure which parts fit your exact bike and setup? Start with a clean, correct plan.
- Fitment confirmed for your exact bike and year
- Parts matched to your speakers and amplifier
- Build help from a GBS specialist
Browse Collections
-
SaleCerwin-Vega 98-13 Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 98-13 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Plug-and-play wiring harness Recommended For Extra Protection FSWPG69 Water Repelling Grill Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment Harley Davidson® 1998-2013 models Upgrade to Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that upgrades your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 1998-2013 Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley.Sale -
SaleCicada Audio CBG8MT 8" Flush Style Billet Grilles w/ RR075T Tweeter Mount
Vendor:Cicada AudioCicada Audio CBG8MT 8-INCH FLUSH STYLE BILLET GRILLES w/ RR075T- Tweeter Mount (Pair) Cicada Audio® Branded Aluminum Grilles (w/ RR05T Mounts) Description: 8″ Cicada Audio® Branded Aluminum Grilles (w/ RR075T Mounts)Description:This is a premium 8″ custom grille set from Cicada Audio®, engineered for riders who demand both exceptional sound and standout style. CNC-Machined from solid aluminum, these grilles are built to exacting standards for a precise fit and long-lasting durability. Designed with a flush-mount profile, they provide a clean, integrated look when installed—no bulky protrusions or awkward fitment. Features a dedicated tweeter mount specifically engineered for the RR075T Micro Horn Tweeter, allowing for seamless integration and optimal audio performance. Coated with a rugged black powder-coated finish to resist wear, corrosion, and road grime—while complementing any bike’s aesthetics. Sold in pairs, ready to install with no guesswork. Perfect for high-performance Harley-Davidson audio upgrades, the CBG8MT grilles offer the quality and branding you expect from Cicada Audio®, delivering both visual impact and professional-grade functionality.Sale -
SaleCicada Audio CHD69HD 6X9″ Plastic Dividers for Saddle Bags (Pair)
Vendor:Cicada AudioThe Cicada Audio CHD69HD is a pair of 6x9-inch molded ABS dividers for Harley-Davidson saddlebags, built to isolate Cicada CH and CHX series 6x9 coax horn speakers.Key Specs Custom molded high-grade ABS Designed for Cicada Audio 6x9-inch CH/CHX speakers only Damping mat included Installation hardware included Sold in pairs Set the amp or DSP crossover to 250Hz at 12-24dB per octave or higher Fitment and Installation NotesCicada warns that a crossover set lower than 250Hz will cause distortion and can damage the speaker, and that damage is not covered by warranty.See the rest of the Cicada Audio collection and matching motorcycle coaxial speakers.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio CHD69SD 6X9″ Silicone Dividers for Saddle Bags (Pair)
Vendor:Cicada AudioThe Cicada Audio CHD69SD is a pair of 6x9-inch molded silicone dividers for Harley-Davidson saddlebags. It is designed for use with the Cicada CMB8.S4 or CMB10.S4 Pro Mid-bass drivers.Key Specs Custom molded high-grade silicone Designed for CMB8.S4 or CMB10.S4 Pro Mid-bass drivers Stops 6x9 coax or horn coax speakers acting as a passive radiator to the mid-bass woofer Sold in pairs Set the amp or DSP crossover to 250Hz at 12-24dB per octave or higher Fitment and Installation NotesCicada warns that a lower crossover point will cause distortion and can damage the speaker, and that damage is not covered by warranty.See the rest of the Cicada Audio collection and matching motorcycle coaxial speakers.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio CHD8HD 8" Plastic Bag Divider (PAIR)
Vendor:Cicada AudioThe Cicada Audio CHD8HD is a pair of 8-inch molded ABS dividers for Harley-Davidson saddlebags. It fits all Cicada Audio 8-inch speakers except the CMB8.S4.Key Specs Custom molded high-grade ABS Fits Cicada Audio 8-inch speakers (excludes CMB8.S4) Damping mat included Installation hardware included Sold in pairs Set the amp or DSP crossover to 250Hz at 12-24dB per octave or higher Fitment and Installation NotesCicada warns that a lower crossover point will cause distortion and can damage the speaker, and that damage is not covered by warranty.See the rest of the Cicada Audio collection and matching motorcycle coaxial speakers.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio CHDJS HD Bag Lid Hinge Cover (Pair)
Vendor:Cicada AudioThe Cicada Audio CHDJS is a pair of Harley-Davidson bag lid hinges with a built-in crossover pocket, so Cicada crossovers can be mounted inside the hinge itself. The same hinges are supplied in Cicada's 2014-2023 8-inch saddlebag lid kits.See the rest of the Cicada Audio collection and matching motorcycle coaxial speakers.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
Curly's Inc 8" Speaker Grills (Pair)
Vendor:Curly's IncThe Curly's Inc 8" Speaker Grills are a universal 8-inch grill pair machined from 6061 aluminum. They stand 3/4" tall with 1/2" of cone travel, so no plastic spacer is needed.Key Specs Material: 6061 aluminum Raw aluminum mesh Height 3/4", with 1/2" for cone travel Through holes or blind holes Finishes: raw, black, black contrast cut, chrome Sold as a pair Fitment and Installation NotesChrome finish is final sale, no returns.Browse more Curly's Inc and Harley-Davidson speaker grilles, or see our custom build options.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
SaleDiamond Audio 98-13 Harley Davidson Cut-In Lid Kit w/Speakers
Vendor:Diamond AudioDiamond Audio 98-13 Harley Davidson Cut-In Lid Kit w/Speakers Diamond Audio Harley Davidson Motorcycle Audio Fitment Harley Davidson® 1998-2013 models Get More Sound from Your Lids with Diamond Audio's Cut-In Lid Kits Upgrade your ride with Diamond Audio's Cut-in Lid Kits, custom-engineered for 1998-2013 Harley Davidson® motorcycles. This premier audio upgrade brings unparalleled clarity and power to your journey, ensuring every ride is an adventure in sound. Seamless Integration Designed specifically for Harley Davidson® models from 1998-2013, Diamond Audio guarantees a perfect fit and a factory-finish appearance, blending effortlessly with your bike's aesthetic. Choices in 6x9" Speakers include: HXM69F4 (4Ω) 2-Way Marine Speakers w/Titanium Dome Tweeter (4Ω) 6"x9" 2-Way Speaker System (Pair) 150W RMS / 450W MAX Power Rating Flush Mount Design Water Spray and Salt Water Resistant, 100% UV Stable Ultra Small Neodymium Motor Structure With Max Xmax Suspension High Temp Injection Molded Composite Basket Molded, UV-Coated, Patent Pending Waterproof Injection PP Cone Integrated Dream RGB LED Lighting Mounting Diameter: 8.64” x 6.0” / 219 x 152.5mm Mounting Depth: 3.15” / 80mm MS692CX2(2Ω) 2-Way Coaxial Subwoofers w/Titanium Dome Tweeter (2Ω) 6"x9" 2-Way Speaker System (Pair) Power Handling Watts (RMS/Peak): 130W/520W Nominal Impedance (Ω): 2Ω Frequency Response (Hz): 45Hz-23kHz Voice Coil: 1.66" (42.2mm) Fs - Free Air Resonance (Hz): 46Hz Qts: 0.51 Vas ft³ (Liter): 0.794" (22.5L) Sensitivity (1W/1M): 87.6db Sensitivity( 2.83V/1M): 94.6db Xmax (mm): 0.315" (8mm) Mounting Depth: 3.818” (97mm) Mounting Diameter: 5.98”x8.85” (152mmX225mm) Manufactured to IPx65 Marine Grade Compliant Specifications 1" High Output Titanium Dome Tweeter UV-Treated Thermal Molded Waterproof Kevlar Cone with Rubber Surround 12dB Bessel Crossover Network Super High Energy Ferrite Motor System With Milled Aluminum Top Plate T-Yoke Back Plate Drilled For 35% More Cooling, Increased Power Handling High-Temperature Cast Aluminum Basket Coax-sub HXM69F2 (2Ω) 2-Way Marine Speakers w/Titanium Dome Tweeter (2Ω) 6"x9" 2-Way Speaker System (Pair) 150W RMS/450W MAX Power Rating Flush Mount Design Water Resistant, 100% UV Stable Ultra Small Neodymium Motor Structure With Max Xmax Suspension High Temp Injection Molded Composite Basket Molded, UV-Coated, Patent Pending Waterproof Injection PP Cone Integrated Dream RGB LED Lighting Mounting Diameter: 8.64" x 6.0" / 219 x 152.5mm Mounting Depth: 3.15" / 80m MS69CX (4Ω) 2-Way Coaxial Subwoofers w/Titanium Dome Tweeter (4Ω) 6"x9" 2-Way Speaker System (Pair) Power Handling Watts (RMS/Peak): 125W/500W Nominal Impedance (Ω): 4Ω Frequency Response (Hz): 46Hz-20kHz Voice Coil: 1.66" (42.2mm) Fs - Free Air Resonance (Hz): 46Hz Qts: 0.57 Vas ft³ (Liter): 0.829" (23.5L) Sensitivity (1W/1M): 87.4db Sensitivity( 2.83V/1M): 91.1db Xmax (mm): 0.315" (8mm) Mounting Depth: 3.81” (97mm) Mounting Diameter: 5.98” x 8.85” (152mm x 225mm) Manufactured to IPx65 Marine Grade Compliant Specifications 1" High Output Titanium Dome Tweeter UV-Treated Thermal Molded Waterproof Kevlar Cone with Rubber Surround 12dB Bessel Crossover Network Super High Energy Ferrite Motor System With Milled Aluminum Top Plate T-Yoke Back Plate Drilled For 35% More Cooling, Increased Power Handling High-Temperature Cast Aluminum Basket Coax-Sub MP694 (4Ω) 2-Way Full-Range Coaxial Speakers w/1" Horn Tweeters (4Ω) 6"x9" 2-Way Speaker System (Pair) Power: 150W RMS/300W MAX SPL(dB) MidBass: 95.6 SPL(dB) Tweeter: 107 Fs(Hz): 82.6 Hi-pass Filter: 12dB 2nd Order Crossover Diameter: 9.33"x6.57" (237mm x 167mm) Mounting Diameter: 8.86"x5.98" (225mm x 152mm) Mounting Depth: 3.99" (101.3mm) Total Depth: 4.26" (108.3mm) Magnet Diameter: 3.94" (100mm) NEO Magnet Heavy Duty Steel Basket Mid Driver: 1.5" Single Layer High Temp 4Ω Voice Coil Tweeter: 1.0" 8 Ohm - Single Layer High Temp Voice Coil Frequency Response: 80Hz -18Khz High Sensitivity 101dB 1W/1M 12dB 2nd Order Filter Crossover MP692 (2Ω) 2-Way Full-Range Coaxial Speakers w/1" Horn Tweeters (2Ω) 6"x9" PRO Full-Range Co-Ax Horn Speaker 250W RMS/500 MAX Power Handling Ferrite Strontium High Temp Magnet structure Heavy Duty Die-cast Aluminum Basket Advanced Voice Coil Heat Sink Design for Better Heat Dissipation 1.5" Single Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer 1.0" Single Layer High Temp Voice Coil with Black Coated VC former for Tweeter Frequency Response: 80Hz -18Khz High Sensitivity 101dB 1W/1M 12dB Crossover Mounting Depth: 3.99" / 101.3mm Mounting Diameter: 8.86" x 5.98" (225 x 152mm) MS69NEO (4Ω) MSNEO SERIES High Output Neo Midrange Speakers (4Ω) Power: 350W RMS/700W MAX SPL(dB): 96 Fs(Hz): 90 Frequency Response: 90Hz-10kHz Diameter: 9.193" x 6.378" (233.5mm x 162mm) Mounting Diameter: 8.583" x 5.748" (218mm x 146mm) Mounting Depth: 3.091" (78.5mm) Magnet Diameter: Heavy Duty Industrial Cast Aluminum Basket Waterproof Black DUPONT™ Kevlar Cone Neodymium Magnet Motor Structure US manufactured 2” Black High Temperature Coated Voice CoilSale -
Dirty Bird Concepts Loud Lids 1998-2013 Harley Davidson 8″ Speaker Lids
Vendor:Dirty Bird ConceptsDirty Bird Concepts Loud Lids 1998-2013 Harley Davidson 8″ Speaker Lids Current Lead time 3-4 weeks (estimated) All body part sales are final! Bigger is better, right? John has re-invented the wheel with these new 8″ speaker saddlebag lids for early and late-model baggers. It fits like a glove on a saddlebag that accepts OEM factory lids. Made from our famous NYB polymer, so you know it's super tough with superior fitment. Just mock these bad boys to your bike and then send them off to paint. It is just that easy—level 2 Installation. See below for more details. DBC-260 It is made from NYB polymer, not ABS or fiberglass. Fits just about any 8″ speaker in the market. Up to 2013, 8.8″ speakers will fit with slight shaving around the ring. Accepts all factory hardware. Speaker not included. They are sold as a pair. Made in the USA. All lids sales are FINAL. Modification may be required Want to get the lids loaded with some Beyma Coax drivers, grills, or both? Give us a call at the shop at 864-334-6131 -
DS18 RY-HD69BAFFLE Universal 6×9 Sealed Speaker Enclosures | Pair
Vendor:DS18 Motorcycle AudioThe DS18 RY-HD69BAFFLE is a pair of universal sealed enclosures for 6x9 speakers, with airtight gaskets and ribbed ABS construction. DS18 lists fairings, saddlebags, doors and custom panels as applications.Key Specs Speaker size: 6x9" Sold as a pair of sealed enclosures Material: ribbed ABS plastic Airtight gasket included Speakers not included Fitment and Installation NotesDS18 does not publish dimensions or model-specific Harley fitment, so measure available depth and clearance and test-fit before drilling.Related: Speaker Installation Parts and DS18 Motorcycle Audio. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
SaleHertz HD13H 6x9 Saddlebag Lid Kit with SX 690 NEO.1 Speakers for 1998-2013 Harley
Vendor:HertzHertz HD13H 6x9 Saddlebag Lid Kit with SX 690 NEO.1 Speakers for 1998-2013 Harley The Hertz HD13H 6x9 Kit pairs the HD13H saddlebag lid kit and speaker harness with a set of SX 690 NEO.1 6×9 three-way speakers for 1998-2013 Harley-Davidson touring bikes. It is the saddlebag half of the Hertz sound pack, sold on its own for bikes that already have front speakers and an amplifier channel pair ready for the rear. Shop Hertz1998-2013 Speaker Lids1998-2013 Harley Audio 1998-2013 HARLEY-DAVIDSON 6×9 SADDLEBAG SPEAKER KIT1998-2013 6×9 Saddlebag Kit Hertz 6×9 saddlebag speakers and lid kit for 1998-2013 Harley-Davidson. HD13H lid kit with speaker harness Two SX 690 NEO.1 6×9 three-way speakers 4Ω, 130W continuous / 260W peak each Start a Build ConsultationCall 864-334-6131 Amplifier required: This kit does not include an amplifier. Each 4Ω speaker needs its own amplifier channel. Plan the amplifier before you order. Key Product Details Kit Model / SKU HD13H6x9 Brand Hertz (Elettromedia) Vehicle Application 1998-2013 Harley-Davidson touring saddlebags Lid Kit HD13H saddlebag lid kit with speaker harness Speakers SX 690 NEO.1 6×9 three-way (pair) Speaker Impedance 4Ω per speaker Power Handling 130W continuous / 260W peak per speaker Amplifier Included No Speakers in Kit Two Listed for 1998-2013 Harley-Davidson touring saddlebags. Verify your year, saddlebag lids and amplifier plan before ordering.Hertz 6×9 Saddlebag Audio for 1998-2013 Harley-Davidson The HD13H 6x9 Kit puts a pair of SX 690 NEO.1 6×9 speakers in the saddlebag lids using the HD13H lid kit and its speaker harness. The kit does not include an amplifier. Each speaker is 4Ω and rated 130W continuous, so plan an amplifier channel for each speaker before you order. SX 690 NEO.1: 6×9 three-way coaxial with a 1.4-inch dome tweeter and 1-inch super tweeter, N38H neodymium magnet and water-repellent, anti-UV cone. Amplifier Required: No amplifier in this kit. The Hertz SP 4.900 used in the Hertz sound packs is rated 160W RMS × 4 at 4Ω, so gains must be set inside the speaker's 130W continuous rating.What's Included and Specifications HD13H Saddlebag Lid Kit with Speaker Harness 1998-2013 saddlebag lid kit with speaker harness. Hertz SX 690 NEO.1 3-Way Speakers 6×9-inch three-way coaxials, 4Ω, 130W continuous / 260W peak, 94dB sensitivity, 1.4-inch dome tweeter plus 1-inch super tweeter. Kit contents are listed as published on the Elettromedia (Hertz) 2026 Hertz Moto price sheet. Component specifications are from Hertz product pages. SX 690 NEO.1 Saddlebag Speakers Speaker Model Hertz SPL Show SX 690 NEO.1 Speaker Type 6×9-inch three-way coaxial (1.4-in dome tweeter + 1-in dome super tweeter) Quantity One pair Impedance 4Ω Power Handling 130W continuous / 260W peak per speaker Sensitivity 94dB Woofer Voice Coil 38mm Magnets N38H neodymium Cone Water-repellent pressed paper with anti-UV treatment Tweeter Protection Resettable solid-state protection circuit Terminals Double Faston terminals Recommended System Planning The HD13H lid kit includes the speaker harness for the saddlebag speakers. Confirm your lid style and any lid modification needed before you start. We install saddlebag speaker kits at our Taylors, SC shop. If you are doing it yourself, call us first so we can confirm parts for your bike. Lid modification: Check speaker clearance, lid hardware and harness routing before modifying any saddlebag lid.What to Pair With the HD13H 6x9 This kit needs amplifier power. These are the parts to plan it with. Hertz SP 4.900 Amplifier The IP55 four-channel amplifier used in every Hertz sound pack, sold on its own. Hertz SX 690 NEO.1 6x9 Speakers The 6x9 three-way pair from this kit, sold separately. Motorcycle Amplifiers Other four-channel amplifiers if you are planning a different power level. Motorcycle Audio Batteries Battery upgrades for builds that run the amplifier hard. Ask us whether your charging system needs one. Related Hertz & Motorcycle Audio Paths Build around the right parts for 1998-2013 saddlebags. Shop Hertz Motorcycle Audio 1998-2013 Harley Speaker Lids 1998-2013 Harley-Davidson Audio Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle 6x9 Speakers Best Use for the HD13H 6x9 Kit 1998-2013 baggers adding saddlebag speakers to a system with an open amplifier channel pair. Built Around Real Motorcycle Audio Saddlebag speakers fill in the sound behind the rider at speed. The SX 690 NEO.1 uses weather-treated cones and neodymium magnets for high output in a light package. Hertz HD13H 6x9 Kit FAQ What comes in the HD13H 6x9 Kit? The HD13H saddlebag lid kit with speaker harness and a pair of SX 690 NEO.1 6x9 three-way speakers. Which years does it fit? Hertz lists it for 1998-2013 Harley-Davidson motorcycles. Confirm your exact bike with us before ordering. Is an amplifier included? No. Plan an amplifier channel for each 4-ohm speaker. How much power can the speakers handle? Hertz rates the SX 690 NEO.1 at 130W continuous and 260W peak per speaker, 4 ohms, 94dB sensitivity. Is a speaker harness included? Yes. The HD13H lid kit includes a speaker harness. Are the speakers weather resistant? Hertz uses water-repellent pressed-paper cones with water, humidity and anti-UV treatment on the SPL Show NEO 6x9 speakers.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
HogWorkz Speaker Lids for Harley 1994-2013 Saddlebags
Vendor:HogWorkzThe HogWorkz Speaker Lids replace the saddlebag lids on 1994-2013 Harley-Davidson touring models with lids that hold 6x9 speakers, aimed at ear height.Key Specs Direct replacement for existing saddlebag lids Designed for 6x9 speakers Lids do not come with speakers Fitment and Installation NotesTo have speakers loaded, call the shop at 864-334-6131.Browse more 1998-2013 speaker lids and speaker lids and audio, or ask about a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131.
1998-2013 Speaker Lids Quick Reference
| Collection Type | Speaker lids and lid kits for 1998-2013 Harley-Davidson saddlebags |
| Lid Sizes | 6x9" and 8" speaker lids |
| Lid Styles | Cut-in lid kits and replacement lids |
| Related Parts | Saddlebag dividers, lid covers, hinge covers, grilles and tweeter plates |
| Brands Carried | Cerwin-Vega, Cicada Audio, Diamond Audio, Dirty Bird Concepts, HogWorkz, Precision Power, Rockford Fosgate, Speed By Design |
Confirm your model year and bag style on the product page before ordering.
Speaker Lids for 1998-2013 Harley-Davidson Touring
Speaker lids let you add rear speakers to 1998-2013 Harley-Davidson Touring saddlebags. This collection includes 6x9" cut-in lid kits from Cerwin-Vega, Diamond Audio, Rockford Fosgate and Precision Power, plus 8" lids from Dirty Bird Concepts, Hogworkz lids and Speed By Design lids.
Dividers, lid covers and grilles from Cicada Audio and others are in the same collection so you can finish the install.
Complete the Lid Install
Motorcycle Speakers
Speaker Adapters
Amplifiers
Speaker Installation Parts
Choosing 1998-2013 Speaker Lids
- Confirm your model year and bag style
- Choose 6x9" or 8" based on the speakers you plan to run
- Decide between a cut-in kit and a replacement lid
Need help? Call 864-334-6131 or start a build consultation.
Need Help Choosing 1998-2013 Harley Speaker Lids?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.