-
SaleDiamond Audio HXM57F2BK 5×7 Harley Direct Replacement Speakers | 2Ω – Pair
Vendor:Diamond AudioHARLEY-DAVIDSON 5×7 DIRECT-REPLACEMENT SPEAKERS Diamond Audio HXM57F2BK 5×7 Harley Direct Replacement Speakers Upgrade a compatible Harley-Davidson factory 5×7-inch speaker location with the Diamond Audio HXM57F2BK high-output two-way coaxial speaker pair. The 2-ohm design, rigid carbon-fiber cones and oversized titanium tweeters are engineered for strong output and improved clarity in an open-air motorcycle environment. Each speaker handles 150 watts RMS and uses a lightweight neodymium motor, extended-excursion suspension and a high-temperature composite basket. Water-spray, saltwater and UV-resistant materials help prepare the speakers for demanding motorcycle and powersports installations. View Specifications Check Fitment Notes High-Output Harley Speaker Pair 5×7-inch two-way coaxial speaker system Harley-Davidson direct-replacement design Sold as one matched pair 2-ohm nominal impedance per speaker 150 watts RMS per speaker 300 watts maximum per speaker Rigid carbon-fiber cones 1.25-inch titanium dome tweeters Lightweight neodymium motor structures Water-spray, saltwater and UV-resistant construction HXM57F2BK Speaker Overview The Diamond Audio HXM57F2BK is designed as a high-output replacement for compatible Harley-Davidson 5×7-inch speaker locations. Its two-way coaxial configuration combines a carbon-fiber midrange cone and an oversized titanium dome tweeter in one compact direct-replacement speaker assembly. The 2-ohm voice-coil configuration allows a compatible motorcycle amplifier to deliver more output than it typically would into a 4-ohm load. Each speaker must be connected to an amplifier channel that is stable at 2 ohms and configured to remain within the speaker’s usable power range. Diamond Audio uses a lightweight neodymium motor, extended-excursion suspension and a high-temperature molded composite basket to support strong output without excessive speaker weight. Why Riders Choose the HXM57F2BK Harley Direct-Replacement Design The 5×7 frame is designed for compatible factory-style Harley speaker locations, reducing the fabrication associated with a universal speaker installation. High-Power 2Ω Operation The 2-ohm impedance is suited to compatible motorcycle amplifiers designed to produce increased output into lower-impedance loads. Carbon-Fiber Cone A rigid, lightweight carbon-fiber cone supports controlled movement, stronger output and improved durability in open-air audio systems. Oversized Titanium Tweeter The 1.25-inch titanium dome tweeter is designed to produce detailed high-frequency output that remains audible through wind, engine and road noise. Neodymium Motor The lightweight neodymium motor structure supports high output while reducing the weight associated with a conventional ferrite magnet. Weather-Resistant Materials Water-spray, saltwater and UV-resistant materials help protect the speakers in motorcycle, marine and powersports environments. Two-Way Coaxial Speaker Design Carbon-Fiber Midrange Cone The main cone reproduces the vocal, instrument and lower-frequency content handled by the speaker. Its rigid construction supports cleaner movement under higher amplifier output. Titanium Dome Tweeter The integrated 1.25-inch tweeter reproduces the upper frequencies, creating a complete two-way speaker without requiring a separate externally mounted tweeter. Coaxial speaker system: The tweeter is integrated into the speaker assembly. No separate external tweeter location is required for the supplied pair. Amplifier Power and Impedance Matching 2Ω Per Speaker Each HXM57F2BK speaker has a nominal impedance of 2 ohms and should normally be powered from its own compatible amplifier channel. 150W RMS Per Speaker Select and configure the amplifier around the speaker’s continuous RMS rating rather than its short-duration maximum-power figure. Clean Signal Required Correct gain structure, filtering and unclipped amplifier output are critical to reliable operation in a high-output motorcycle system. Left Speaker One 2Ω speaker on one amplifier channel Right Speaker One 2Ω speaker on one amplifier channel Recommended Amplifier Type Two-channel or multi-channel amplifier stable at 2Ω stereo Speaker Power Rating 150W RMS / 300W maximum per speaker Amplifier compatibility: Do not connect these speakers to an amplifier channel that is not stable at 2 ohms. Gain and crossover settings must be configured for the speaker pair and the complete audio system. Diamond Audio HXM57F2BK Specifications Manufacturer Diamond Audio Model HXM57F2BK Speaker Type Two-way coaxial Harley-Davidson direct-replacement speakers Nominal Speaker Size 5×7 inches Quantity Two speakers / one matched pair Nominal Impedance 2Ω per speaker RMS Power Handling 150 watts per speaker Maximum Power Handling 300 watts per speaker Sensitivity 91dB, 1W / 1M Cone Material Rigid carbon fiber Tweeter 1.25-inch oversized titanium dome tweeter Motor Structure Lightweight neodymium motor Suspension Extended-excursion Max Xmax suspension Basket High-temperature lightweight injection-molded composite Mounting Style Flush mount or rear mount Mounting Depth 2.55 inches / 64.84mm Published Cutout Measurement 7.11 inches / 180.72mm Overall Dimensions 7.80 × 5.44 inches / 198.21 × 138.2mm Overall Height 3.11 inches / 78.87mm Environmental Resistance Water-spray and saltwater resistant UV Protection 100% UV-stable materials Measurement clarification: Diamond Audio publishes a single 7.11-inch cutout measurement even though the speaker uses an oval 5×7 frame. Compare the actual mounting template and vehicle opening before modifying any speaker enclosure or saddlebag lid. Weather-Resistant Motorcycle Construction Water-Spray Resistance The speaker materials are designed to tolerate water spray encountered in open-air motorcycle and powersports installations. Saltwater Resistance Materials selected for saltwater resistance provide additional protection in humid and coastal environments. UV-Stable Materials UV-stable components help reduce deterioration caused by prolonged exposure to direct sunlight. Not described as waterproof: Water-spray and saltwater resistance should not be interpreted as a waterproof rating. Protect speaker terminals and wiring connections from standing water and direct high-pressure spray. Harley-Davidson Fitment Notes Verify the exact speaker location: Diamond Audio’s current product page describes the HXM57F2BK as a direct-replacement lid speaker while also referencing factory fairing locations. Confirm the motorcycle year, model, factory 5×7 location and enclosure before ordering. Confirm that the motorcycle uses a factory-style 5×7-inch speaker opening. Verify whether the intended location is a saddlebag lid, fairing or custom enclosure. Measure the actual opening before relying on the published cutout dimension. Confirm at least 2.55 inches of rear mounting depth. Check the 3.11-inch overall height against the grille or lid clearance. Confirm that the speaker terminals clear the enclosure and mounting hardware. Verify that the amplifier is stable at 2 ohms per channel. Do not assume universal fitment across all Harley-Davidson Touring models. Use the factory hardware or appropriate replacement fasteners for the application. Professional fitment verification is recommended before modifying painted lids. Installation and System Setup Disconnect the motorcycle battery before beginning the installation. Remove the existing speaker and inspect the complete mounting opening. Compare the HXM57F2BK basket and mounting pattern with the factory location. Confirm mounting depth, terminal clearance and grille clearance. Verify that the amplifier channel is stable at a 2-ohm load. Observe correct positive and negative speaker polarity. Use weather-resistant terminals or connectors suitable for the location. Configure appropriate high-pass filtering for the installation. Set amplifier gain using clean measured output. Secure all wiring against vibration, moisture, heat and sharp edges. Test both speakers before reinstalling the fairing or saddlebag components. Inspect for rattles, air leaks and mechanical interference after assembly. Best For Compatible Harley-Davidson factory 5×7 speaker replacements Harley Touring motorcycles using supported 5×7 locations Two-ohm motorcycle amplifier systems Riders wanting stronger output than a basic factory speaker Systems requiring integrated midrange and high-frequency reproduction Motorcycle installations exposed to sunlight and occasional water spray Amplified Harley-Davidson audio systems Related Motorcycle Audio Categories Motorcycle Speaker Upgrades Shop Motorcycle Speakers Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Amplifiers and Integration Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Diamond Audio HXM57F2BK FAQ Are the HXM57F2BK speakers sold as a pair? Yes. The product includes two matched 5×7-inch coaxial speakers. What impedance are the speakers? Each speaker has a nominal impedance of 2 ohms. How much power can each speaker handle? Each HXM57F2BK is rated for 150 watts RMS and 300 watts maximum. Does each speaker include a tweeter? Yes. Each coaxial speaker includes an integrated oversized 1.25-inch titanium dome tweeter. What material is used for the main cone? The main speaker cone uses rigid carbon-fiber construction. What amplifier should be used? Use an amplifier that is stable at 2 ohms per channel and can be configured around the speakers’ 150-watt RMS rating. Are these direct-replacement Harley speakers? Diamond Audio markets them as Harley-Davidson 5×7 direct-replacement speakers. Exact year, model and speaker-location compatibility must still be verified. Are these fairing or saddlebag speakers? Diamond Audio’s current official page contains conflicting references to lid and fairing locations. Confirm the actual factory 5×7 location on the motorcycle before ordering. What is the mounting depth? The published mounting depth is 2.55 inches, or 64.84mm. Can these be flush mounted or rear mounted? Diamond Audio lists both flush-mount and rear-mount installation capability, subject to the enclosure and mounting location. Are the speakers waterproof? Diamond Audio describes them as resistant to water spray and saltwater and built with UV-stable materials. The manufacturer does not publish a waterproof IP rating for this model. Do these require a DSP? A DSP is not required for basic operation, but a compatible processor can provide more precise filtering, equalization, time alignment and output control. Need Help Confirming Your Harley 5×7 Speaker Fitment? Garage Bagger Stereo can help verify the motorcycle’s speaker location, mounting depth, 2-ohm amplifier compatibility, wiring, filtering and factory or aftermarket signal integration before the speakers are installed. Installation Services Request a Custom BuildSale -
SaleCicada Audio CXXM65 6.5" Mid-Bass Speakers | 2Ω or 4Ω – Pair
Vendor:Cicada AudioHIGH-OUTPUT 6.5-INCH MOTORCYCLE MID-BASS Cicada Audio CXXM65 6.5" Mid-Bass Speakers | 2Ω or 4Ω – Pair The Cicada Audio CXXM65 is a high-output 6.5-inch mid-bass speaker pair available in 2Ω and 4Ω versions for motorcycle audio systems. Each speaker combines a moisture-resistant Kevlar® cone, efficient neodymium motor, high-sensitivity design and shallow mounting depth for tight, responsive mid-bass in demanding open-air installations. Choose Impedance View Specifications Responsive Motorcycle Mid-Bass Available in 2Ω and 4Ω configurations Sold as a matched pair 100 watts RMS per speaker 200 watts maximum per speaker Lightweight Kevlar® cones N45H neodymium magnet motors Shallow 2.26-inch mounting depth 6.5-inch grilles and hardware included Rain or Shine™ all-weather construction Cicada CXXM65 Mid-Bass Speaker Overview The Cicada Audio CXXM65 is designed for motorcycle audio systems that need clean, punchy mid-bass without the depth and weight of a conventional automotive woofer. Its lightweight Kevlar® cone is engineered to remain rigid while resisting heat and moisture. Combined with an efficient neodymium motor and 92dB sensitivity, the CXXM65 delivers responsive mid-bass from a properly matched motorcycle amplifier. Select the CXXM65.2 2Ω version or the CXXM65.4 4Ω version based on your amplifier, speaker wiring and final channel impedance requirements. Available Impedance Options and SKUs CXXM65.2 — 2-Ohm Version Select the 2Ω version when your amplifier is stable at the intended 2-ohm channel load and the speaker wiring is designed for the lower impedance. CXXM65.4 — 4-Ohm Version Select the 4Ω version for amplifiers and multi-speaker configurations designed around a 4-ohm channel load. Choose the correct impedance: Your selection must match the amplifier’s rated load, the number of speakers connected to each channel and the final series or parallel wiring configuration. What Comes in the Box Two Cicada Audio CXXM65 6.5-inch mid-bass speakers Selected 2Ω or 4Ω speaker configuration Two protective 6.5-inch speaker grilles Speaker installation hardware Important: Motorcycle-specific speaker adapters, fairing brackets, saddlebag rings, wiring harnesses and amplifier installation components are not included unless specifically added as product options. Why Riders Choose the CXXM65 100W RMS Power Handling Each 6.5-inch speaker handles 100 watts RMS and 200 watts maximum for strong output from a properly matched motorcycle amplifier. 2Ω or 4Ω Variants Two impedance options allow the speakers to be matched to different amplifiers, channel loads and multi-speaker configurations. Kevlar Mid-Bass Cone The lightweight Kevlar® cone is strong, heat resistant and moisture resistant for tight, controlled mid-bass output. High-Sensitivity Design A 92dB sensitivity rating helps the CXXM65 produce clean output without requiring excessive amplifier power. Shallow Mounting Depth A 2.26-inch mounting depth supports motorcycle installations where available fairing, lower or saddlebag space is limited. All-Weather Construction Rain or Shine™ construction and UV-protected surfaces are engineered for exposed motorcycle audio environments. CXXM65 Speaker Technology Kevlar® cone provides a lightweight, rigid, high-temperature and moisture-resistant speaker diaphragm OFC copper voice coil supports efficient conductivity while helping reduce heat generation N45H neodymium motor produces strong output and high efficiency without unnecessary speaker weight Custom-tooled polycarbonate frame is engineered to withstand extreme heat in motorcycle installations UV-protected surfaces help prevent fading and damage from extended sun exposure Cicada CXXM65 Specifications Available Models CXXM65.2 and CXXM65.4 Speaker Size 6.5-inch mid-bass driver Quantity Pair Impedance Options 2Ω or 4Ω 2Ω Variant SKU CXXM65.2 4Ω Variant SKU CXXM65.4 Power Handling 100W RMS / 200W maximum per speaker Cone Material Kevlar® Magnet N45H neodymium Sensitivity 92dB, 1W / 1M Frequency Response 60Hz–5kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Grilles Included Warranty Two-year manufacturer warranty Fitment and Ordering Notes Fitment: The CXXM65 is designed for compatible custom 6.5-inch motorcycle speaker locations. Verify the speaker opening, mounting depth, grille clearance and amplifier impedance before ordering. Select CXXM65.2 for the 2Ω version. Select CXXM65.4 for the 4Ω version. Both variants are sold as a pair. Each speaker is rated for 100 watts RMS. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Verify the 2.26-inch mounting depth and 5.43-inch cutout before installation. Motorcycle-specific adapters or mounting brackets may be required. Apply the correct crossover and amplifier gain settings before extended use. Professional installation and system tuning are recommended. Best For High-output motorcycle fairing audio systems Custom 6.5-inch saddlebag speaker installations Motorcycle lower-fairing speaker locations Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker systems requiring a specific final channel impedance Riders wanting tighter mid-bass from a shallow speaker platform Related Motorcycle Audio Categories Cicada and Motorcycle Speakers Shop Cicada Audio Shop Motorcycle Speakers Motorcycle Speaker Installation Parts Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Lids Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada CXXM65 FAQ Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select CXXM65.2 for the 2Ω speaker pair or CXXM65.4 for the 4Ω speaker pair before adding the product to your cart. Are the CXXM65 speakers sold individually or as a pair? Both the CXXM65.2 and CXXM65.4 variants are sold as a pair. Which impedance should I choose? Choose the impedance supported by your amplifier and complete speaker wiring plan. The final channel load depends on the number of speakers connected and whether they are wired in series or parallel. How much power can the CXXM65 handle? Each speaker is rated for 100 watts RMS and 200 watts maximum power. Are these coaxial speakers? No. The CXXM65 is a dedicated 6.5-inch mid-bass speaker without an integrated tweeter. Are these subwoofers? No. The CXXM65 is a mid-bass speaker with a published frequency response of 60Hz–5kHz. It is not intended to replace a dedicated subwoofer. Are speaker grilles included? Yes. The pair includes two 6.5-inch protective grilles and installation hardware. Will these speakers fit factory Harley-Davidson locations? Fitment depends on the motorcycle year, speaker location, mounting opening, available depth and adapters being used. Model-specific brackets or mounting adapters may be required. Does this speaker pair need an amplifier? A properly matched motorcycle amplifier that is stable at the selected speaker impedance is recommended to take advantage of the speakers’ power handling and output capability. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for both CXXM65 impedance variants. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your motorcycle year, speaker locations, amplifier model and planned wiring. We’ll help determine which CXXM65 impedance is correct and recommend the proper mounting and installation components for your system. Call 864-334-6131 Ask GBS for HelpSale -
SaleCicada Audio CXK69 6x9" Component Speaker Kit | 2-Ohm or 4-Ohm
Vendor:Cicada AudioHIGH-OUTPUT 6X9 COMPONENT AUDIO Cicada Audio CXK69 6x9" Component Speaker Kit | 2-Ohm or 4-Ohm The Cicada Audio CXK69 is a complete component speaker system available in 2Ω and 4Ω versions for high-output motorcycle audio builds using compatible 6x9-inch speaker locations. Each kit combines powerful Carbon Matrix Composite mid-bass drivers, separate shallow ring-radiator horn tweeters and external crossovers for strong mid-bass, focused highs and dependable all-weather performance. Choose Impedance View Specifications Serious 6x9 Motorcycle Audio Available in 2Ω and 4Ω configurations High-output 6x9-inch mid-bass drivers 250 watts RMS per mid-bass driver Separate shallow ring-radiator horn tweeters External 12dB crossovers at 7kHz Carbon Matrix Composite™ cones Rain or Shine™ all-weather performance design Cicada CXK69 Component Kit Overview The Cicada Audio CXK69 is built for riders who want more output, stronger mid-bass and better high-frequency projection than a basic coaxial speaker can provide. This component system separates the 6x9-inch mid-bass drivers from the horn tweeters. The mid-bass drivers concentrate on powerful lower and middle frequencies while the dedicated tweeters produce the focused high-frequency output needed for open-road motorcycle listening. Select the CXK69.2 2Ω version or CXK69.4 4Ω version based on your amplifier, channel configuration and total system impedance requirements. Available Impedance Options and SKUs CXK69.2 — 2-Ohm Version Select the 2Ω version when your amplifier is stable at a 2-ohm channel load and the system is designed to produce greater power into the lower impedance. CXK69.4 — 4-Ohm Version Select the 4Ω version for amplifiers and multi-speaker system configurations designed around a 4-ohm channel load. Choose carefully: The correct impedance depends on your amplifier’s rated load, the number of speakers connected to each channel and the final wiring configuration. Do not select impedance based only on which version appears to offer more power. What Comes in the Kit Pair of Cicada Audio 6x9-inch mid-bass drivers in the selected 2Ω or 4Ω configuration Pair of 4Ω 1-inch shallow ring-radiator horn tweeters External component crossovers Important: Motorcycle-specific saddlebag lids, cut-in kits, speaker adapters, grilles, tweeter mounting bridges and wiring harnesses are not included unless specifically stated in the product options. Why Riders Choose This Kit 250W RMS Mid-Bass Drivers The 6x9-inch drivers are engineered for substantial amplifier power and strong output in demanding open-air motorcycle environments. Separate Horn Tweeters Dedicated ring-radiator horn tweeters provide focused high-frequency projection without limiting the movement of the mid-bass cone. 2Ω or 4Ω Variants Two impedance options make it easier to match the component kit to different amplifiers, channel loads and multi-speaker configurations. Carbon Matrix Composite Cone Cicada’s CMC™ cone is lightweight, rigid, heat resistant and designed for efficient, controlled mid-bass performance. External Crossovers Dedicated external crossovers divide the audio signal between the mid-bass drivers and horn tweeters for controlled component operation. All-Weather Construction Rain or Shine™ construction supports real motorcycle use and the changing environmental conditions encountered on the road. Mid-Bass Driver Technology Carbon Matrix Composite™ cone provides a lightweight, strong and high-temperature-resistant speaker diaphragm OFC copper shorting ring helps extend the upper-frequency performance of the 6x9-inch mid-bass driver Black Coat™ OFC copper voice coil supports high conductivity, low resistance and extreme thermal performance N35SH neodymium motor provides strong motor force without the weight of a large conventional ferrite structure Die-cast aluminum basket features Cicada Audio Vortex Flow Venting™ for airflow and structural integrity 6x9-Inch Mid-Bass Specifications Available Models CXK69.2 and CXK69.4 Driver Type 6x9-inch mid-bass driver Impedance Options 2Ω or 4Ω 2Ω Variant SKU CXK69.2 4Ω Variant SKU CXK69.4 Power Handling 250W RMS / 500W maximum Voice Coil 2 inches / 51mm Cone Material Carbon Matrix Composite™ Magnet N35SH neodymium Sensitivity 94dB, 1W / 1M Frequency Response 70Hz–10kHz ±3dB Mounting Depth 3.26 inches / 83mm Mounting Diameter 5.7 × 8.5 inches / 145 × 216mm Horn Tweeter and Crossover Specifications Tweeter Type 1-inch shallow ring-radiator horn tweeter Tweeter Impedance 4Ω Power Handling 50W RMS / 100W maximum Voice Coil 1 inch / 25mm Tweeter Dome Aluminum Magnet N35SH neodymium Sensitivity 101dB, 1W / 1M Frequency Response 2kHz–20kHz ±3dB Mounting Depth 1.1 inches / 28mm Mounting Diameter 2 inches / 50.8mm Crossover External 12dB crossover at 7kHz Fitment and Ordering Notes Fitment: The CXK69 is a component speaker system for compatible 6x9-inch speaker locations. Verify your motorcycle year, model, saddlebag lid configuration, mounting depth, required adapters and amplifier impedance requirements before ordering. Select CXK69.2 for the 2Ω mid-bass version. Select CXK69.4 for the 4Ω mid-bass version. Both kit variants include 4Ω horn tweeters. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Harley-Davidson saddlebag installations require compatible 6x9 speaker lids or a cut-in lid kit. Some factory speaker lids may require model-specific mounting adapters. Confirm tweeter, crossover and wiring placement before beginning installation. Apply the correct high-pass crossover and amplifier gain settings. Professional installation and system tuning are recommended. Best For High-output motorcycle saddlebag audio systems Compatible 6x9-inch Harley-Davidson speaker lids Custom saddlebag speaker installations Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker builds requiring specific final channel impedance Riders wanting stronger mid-bass and focused high-frequency output Related Motorcycle Audio Categories Speakers and Saddlebag Lids Shop Cicada Audio Shop Motorcycle Speakers Motorcycle Speaker Lids Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Installation Parts Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada CXK69 FAQ Is the CXK69 a coaxial or component speaker system? The CXK69 is a component system with separate 6x9-inch mid-bass drivers, horn tweeters and external crossovers. Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select CXK69.2 for the 2Ω mid-bass kit or CXK69.4 for the 4Ω mid-bass kit before adding the product to your cart. Are the tweeters also available in 2Ω and 4Ω versions? No. The separate ring-radiator horn tweeters supplied with both CXK69 variants are rated at 4Ω. Which impedance should I choose? Choose the impedance supported by your amplifier and overall speaker wiring plan. The 2Ω version can allow a compatible amplifier to produce more power, while the 4Ω version may be better suited to multi-speaker configurations or amplifiers designed around a 4-ohm channel load. How much power can the 6x9 speakers handle? Each 6x9-inch mid-bass driver is rated for 250 watts RMS and 500 watts maximum power. Does this kit include separate tweeters? Yes. The system includes separate shallow ring-radiator horn tweeters designed to operate through the included external crossovers. Will these speakers fit factory Harley saddlebag lids? Fitment depends on the motorcycle year, factory lid configuration, speaker opening, mounting depth and adapters being used. Compatible 6x9 speaker lids or a model-specific cut-in kit may be required. Are saddlebag lids included? No. Saddlebag lids, cut-in kits, grilles and model-specific adapters are sold separately unless specifically added as a product option. Does this component kit need an amplifier? A properly matched motorcycle amplifier is recommended to take advantage of the system’s power handling and output capability. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for the mid-bass drivers and tweeters. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your motorcycle year, model, saddlebag lid configuration, amplifier and planned speaker wiring. We’ll help determine which CXK69 impedance is correct and recommend the proper lid kit, wiring and supporting equipment. Call 864-334-6131 Ask GBS for HelpSale -
DS18 PRO-CF6 — 6.5" Slim Carbon Fiber Motorcycle Loudspeaker
Vendor:DS18DS18 MOTORCYCLE LOUDSPEAKER DS18 PRO-CF6 6.5" Slim Carbon Fiber Motorcycle Loudspeaker The DS18 PRO-CF6 is a 6.5 inch slim carbon fiber loudspeaker built for motorcycle, powersports, ATV, UTV, and custom audio systems where space is tight but output still matters. Its shallow mounting depth, neodymium motor, 150W RMS power handling, and water-resistant carbon fiber cone make it a strong fit for fairings, pods, lids, lowers, and tight custom locations. View Specs Need Help? Slim Fitment with Serious Output 6.5 inch slim motorcycle loudspeaker 150W RMS / 300W max power handling Water-resistant carbon fiber cone Neodymium magnet 93dB sensitivity 2Ω and 4Ω options 2.3 inch mounting depth DS18 PRO-CF6 Motorcycle Speaker Overview The DS18 PRO-CF6 is built for riders who need a shallow 6.5 inch speaker with strong midrange output, efficient performance, and motorcycle-ready construction. This speaker is a strong fit for Harley-Davidson, Indian, powersports, ATV, UTV, and custom audio systems where mounting depth and output both matter. With its slim profile, water-resistant carbon fiber cone, and neodymium motor structure, the PRO-CF6 works well in fairing speaker upgrades, lower fairing locations, saddlebag lid builds, pods, and custom mounting locations where deeper speakers may not fit. Why Riders Choose It Shallow 6.5" Design The PRO-CF6 is built for tight motorcycle and powersports installs where a standard-depth speaker may not work. Carbon Fiber Cone The water-resistant carbon fiber cone helps deliver durable output for real riding conditions and open-air audio systems. Neodymium Magnet The neodymium motor helps reduce weight while still supporting strong control and efficient output. 150W RMS Power With 150W RMS and 300W max power handling, this speaker is built for loud, clean midrange performance. 2Ω and 4Ω Options Choose the correct impedance option to match your amplifier, wiring layout, and system design. High-Output Builds This speaker is a strong choice for Harley, Indian, powersports, and custom motorcycle audio systems. Best With Harley-Davidson motorcycle audio builds Indian motorcycle audio upgrades Fairing speaker installations Lower fairing speaker upgrades Saddlebag lid speaker builds Custom motorcycle speaker pods ATV, UTV, and powersports audio systems Motorcycle amplifiers with proper high-pass crossover setup Systems needing slim mounting depth and strong midrange output Sold individually. Grilles are not included. Key Specifications Speaker Model DS18 PRO-CF6 Speaker Type 6.5 inch slim carbon fiber motorcycle loudspeaker Size 6.5" / 165mm Power Handling 150W RMS / 300W Max Impedance Options 2Ω or 4Ω Sensitivity 93dB Frequency Response 100Hz – 6kHz Recommended High-Pass 120Hz Cone / Dust Cap Water-resistant carbon fiber Voice Coil 1.5" / 38mm CCAW on Kapton former Magnet Neodymium Mounting Depth 2.3" / 58mm Cutout 5.6" / 144mm Always verify depth, cutout, impedance, crossover settings, and amplifier power before final installation. Garage Bagger Stereo Advantage Speaker matching for Harley-Davidson, Indian, and powersports builds Clean amplifier pairing and crossover recommendations Tech support for fitment, wiring, and tuning Real motorcycle audio experience from Garage Bagger Stereo Important Installation Notes Sold individually unless otherwise stated. Grilles are not included. Choose the correct 2Ω or 4Ω version for your amplifier setup. Use proper crossover settings before playing at high volume. Confirm mounting depth and cutout before installation. Professional installation is recommended for custom motorcycle audio builds. Related Motorcycle Audio Categories Motorcycle Speakers Motorcycle Speakers 6.5 Inch Midrange Motorcycle Speakers 6.5 Inch Pro Coaxial Motorcycle Speakers Amplifiers and Wiring Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP & Signal Integration Install Support Motorcycle Speaker Installation Parts Motorcycle Speaker Lids Motorcycle Audio Installation in Taylors, SC DS18 PRO-CF6 FAQ Is the DS18 PRO-CF6 sold as a single speaker? Yes. The DS18 PRO-CF6 is sold individually unless otherwise stated. Does the DS18 PRO-CF6 include grilles? No. Grilles are not included. Is this speaker good for motorcycle audio? Yes. The slim design, carbon fiber cone, neodymium magnet, and shallow mounting depth make it a strong option for motorcycle and powersports audio systems. What amplifier should I use? The correct amplifier depends on whether you choose the 2Ω or 4Ω version, how many speakers are being used, and the rest of the system design. What high-pass crossover should I use? The recommended high-pass point is 120Hz. Final tuning may vary based on the bike, speaker location, amplifier power, and system goals. Need Help Matching This Speaker? Call Garage Bagger Stereo with your bike, speaker locations, and amplifier setup. We’ll help match the right impedance, amplifier power, and tuning direction for your build. Call 864-334-6131 Ask GBS for Help
-
Sale
Diamond Audio HXM57F2BK 5×7 Harley Direct Replacement Speakers | 2Ω – Pair
Vendor:Diamond AudioHARLEY-DAVIDSON 5×7 DIRECT-REPLACEMENT SPEAKERS Diamond Audio HXM57F2BK 5×7 Harley Direct Replacement Speakers Upgrade a compatible Harley-Davidson factory 5×7-inch speaker location with the Diamond Audio HXM57F2BK high-output two-way coaxial speaker pair. The 2-ohm design, rigid carbon-fiber cones and oversized titanium tweeters are engineered for strong output and improved clarity in an open-air motorcycle environment. Each speaker handles 150 watts RMS and uses a lightweight neodymium motor, extended-excursion suspension and a high-temperature composite basket. Water-spray, saltwater and UV-resistant materials help prepare the speakers for demanding motorcycle and powersports installations. View Specifications Check Fitment Notes High-Output Harley Speaker Pair 5×7-inch two-way coaxial speaker system Harley-Davidson direct-replacement design Sold as one matched pair 2-ohm nominal impedance per speaker 150 watts RMS per speaker 300 watts maximum per speaker Rigid carbon-fiber cones 1.25-inch titanium dome tweeters Lightweight neodymium motor structures Water-spray, saltwater and UV-resistant construction HXM57F2BK Speaker Overview The Diamond Audio HXM57F2BK is designed as a high-output replacement for compatible Harley-Davidson 5×7-inch speaker locations. Its two-way coaxial configuration combines a carbon-fiber midrange cone and an oversized titanium dome tweeter in one compact direct-replacement speaker assembly. The 2-ohm voice-coil configuration allows a compatible motorcycle amplifier to deliver more output than it typically would into a 4-ohm load. Each speaker must be connected to an amplifier channel that is stable at 2 ohms and configured to remain within the speaker’s usable power range. Diamond Audio uses a lightweight neodymium motor, extended-excursion suspension and a high-temperature molded composite basket to support strong output without excessive speaker weight. Why Riders Choose the HXM57F2BK Harley Direct-Replacement Design The 5×7 frame is designed for compatible factory-style Harley speaker locations, reducing the fabrication associated with a universal speaker installation. High-Power 2Ω Operation The 2-ohm impedance is suited to compatible motorcycle amplifiers designed to produce increased output into lower-impedance loads. Carbon-Fiber Cone A rigid, lightweight carbon-fiber cone supports controlled movement, stronger output and improved durability in open-air audio systems. Oversized Titanium Tweeter The 1.25-inch titanium dome tweeter is designed to produce detailed high-frequency output that remains audible through wind, engine and road noise. Neodymium Motor The lightweight neodymium motor structure supports high output while reducing the weight associated with a conventional ferrite magnet. Weather-Resistant Materials Water-spray, saltwater and UV-resistant materials help protect the speakers in motorcycle, marine and powersports environments. Two-Way Coaxial Speaker Design Carbon-Fiber Midrange Cone The main cone reproduces the vocal, instrument and lower-frequency content handled by the speaker. Its rigid construction supports cleaner movement under higher amplifier output. Titanium Dome Tweeter The integrated 1.25-inch tweeter reproduces the upper frequencies, creating a complete two-way speaker without requiring a separate externally mounted tweeter. Coaxial speaker system: The tweeter is integrated into the speaker assembly. No separate external tweeter location is required for the supplied pair. Amplifier Power and Impedance Matching 2Ω Per Speaker Each HXM57F2BK speaker has a nominal impedance of 2 ohms and should normally be powered from its own compatible amplifier channel. 150W RMS Per Speaker Select and configure the amplifier around the speaker’s continuous RMS rating rather than its short-duration maximum-power figure. Clean Signal Required Correct gain structure, filtering and unclipped amplifier output are critical to reliable operation in a high-output motorcycle system. Left Speaker One 2Ω speaker on one amplifier channel Right Speaker One 2Ω speaker on one amplifier channel Recommended Amplifier Type Two-channel or multi-channel amplifier stable at 2Ω stereo Speaker Power Rating 150W RMS / 300W maximum per speaker Amplifier compatibility: Do not connect these speakers to an amplifier channel that is not stable at 2 ohms. Gain and crossover settings must be configured for the speaker pair and the complete audio system. Diamond Audio HXM57F2BK Specifications Manufacturer Diamond Audio Model HXM57F2BK Speaker Type Two-way coaxial Harley-Davidson direct-replacement speakers Nominal Speaker Size 5×7 inches Quantity Two speakers / one matched pair Nominal Impedance 2Ω per speaker RMS Power Handling 150 watts per speaker Maximum Power Handling 300 watts per speaker Sensitivity 91dB, 1W / 1M Cone Material Rigid carbon fiber Tweeter 1.25-inch oversized titanium dome tweeter Motor Structure Lightweight neodymium motor Suspension Extended-excursion Max Xmax suspension Basket High-temperature lightweight injection-molded composite Mounting Style Flush mount or rear mount Mounting Depth 2.55 inches / 64.84mm Published Cutout Measurement 7.11 inches / 180.72mm Overall Dimensions 7.80 × 5.44 inches / 198.21 × 138.2mm Overall Height 3.11 inches / 78.87mm Environmental Resistance Water-spray and saltwater resistant UV Protection 100% UV-stable materials Measurement clarification: Diamond Audio publishes a single 7.11-inch cutout measurement even though the speaker uses an oval 5×7 frame. Compare the actual mounting template and vehicle opening before modifying any speaker enclosure or saddlebag lid. Weather-Resistant Motorcycle Construction Water-Spray Resistance The speaker materials are designed to tolerate water spray encountered in open-air motorcycle and powersports installations. Saltwater Resistance Materials selected for saltwater resistance provide additional protection in humid and coastal environments. UV-Stable Materials UV-stable components help reduce deterioration caused by prolonged exposure to direct sunlight. Not described as waterproof: Water-spray and saltwater resistance should not be interpreted as a waterproof rating. Protect speaker terminals and wiring connections from standing water and direct high-pressure spray. Harley-Davidson Fitment Notes Verify the exact speaker location: Diamond Audio’s current product page describes the HXM57F2BK as a direct-replacement lid speaker while also referencing factory fairing locations. Confirm the motorcycle year, model, factory 5×7 location and enclosure before ordering. Confirm that the motorcycle uses a factory-style 5×7-inch speaker opening. Verify whether the intended location is a saddlebag lid, fairing or custom enclosure. Measure the actual opening before relying on the published cutout dimension. Confirm at least 2.55 inches of rear mounting depth. Check the 3.11-inch overall height against the grille or lid clearance. Confirm that the speaker terminals clear the enclosure and mounting hardware. Verify that the amplifier is stable at 2 ohms per channel. Do not assume universal fitment across all Harley-Davidson Touring models. Use the factory hardware or appropriate replacement fasteners for the application. Professional fitment verification is recommended before modifying painted lids. Installation and System Setup Disconnect the motorcycle battery before beginning the installation. Remove the existing speaker and inspect the complete mounting opening. Compare the HXM57F2BK basket and mounting pattern with the factory location. Confirm mounting depth, terminal clearance and grille clearance. Verify that the amplifier channel is stable at a 2-ohm load. Observe correct positive and negative speaker polarity. Use weather-resistant terminals or connectors suitable for the location. Configure appropriate high-pass filtering for the installation. Set amplifier gain using clean measured output. Secure all wiring against vibration, moisture, heat and sharp edges. Test both speakers before reinstalling the fairing or saddlebag components. Inspect for rattles, air leaks and mechanical interference after assembly. Best For Compatible Harley-Davidson factory 5×7 speaker replacements Harley Touring motorcycles using supported 5×7 locations Two-ohm motorcycle amplifier systems Riders wanting stronger output than a basic factory speaker Systems requiring integrated midrange and high-frequency reproduction Motorcycle installations exposed to sunlight and occasional water spray Amplified Harley-Davidson audio systems Related Motorcycle Audio Categories Motorcycle Speaker Upgrades Shop Motorcycle Speakers Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Amplifiers and Integration Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Diamond Audio HXM57F2BK FAQ Are the HXM57F2BK speakers sold as a pair? Yes. The product includes two matched 5×7-inch coaxial speakers. What impedance are the speakers? Each speaker has a nominal impedance of 2 ohms. How much power can each speaker handle? Each HXM57F2BK is rated for 150 watts RMS and 300 watts maximum. Does each speaker include a tweeter? Yes. Each coaxial speaker includes an integrated oversized 1.25-inch titanium dome tweeter. What material is used for the main cone? The main speaker cone uses rigid carbon-fiber construction. What amplifier should be used? Use an amplifier that is stable at 2 ohms per channel and can be configured around the speakers’ 150-watt RMS rating. Are these direct-replacement Harley speakers? Diamond Audio markets them as Harley-Davidson 5×7 direct-replacement speakers. Exact year, model and speaker-location compatibility must still be verified. Are these fairing or saddlebag speakers? Diamond Audio’s current official page contains conflicting references to lid and fairing locations. Confirm the actual factory 5×7 location on the motorcycle before ordering. What is the mounting depth? The published mounting depth is 2.55 inches, or 64.84mm. Can these be flush mounted or rear mounted? Diamond Audio lists both flush-mount and rear-mount installation capability, subject to the enclosure and mounting location. Are the speakers waterproof? Diamond Audio describes them as resistant to water spray and saltwater and built with UV-stable materials. The manufacturer does not publish a waterproof IP rating for this model. Do these require a DSP? A DSP is not required for basic operation, but a compatible processor can provide more precise filtering, equalization, time alignment and output control. Need Help Confirming Your Harley 5×7 Speaker Fitment? Garage Bagger Stereo can help verify the motorcycle’s speaker location, mounting depth, 2-ohm amplifier compatibility, wiring, filtering and factory or aftermarket signal integration before the speakers are installed. Installation Services Request a Custom BuildSale -
Sale
Cicada Audio CXXM65 6.5" Mid-Bass Speakers | 2Ω or 4Ω – Pair
Vendor:Cicada AudioHIGH-OUTPUT 6.5-INCH MOTORCYCLE MID-BASS Cicada Audio CXXM65 6.5" Mid-Bass Speakers | 2Ω or 4Ω – Pair The Cicada Audio CXXM65 is a high-output 6.5-inch mid-bass speaker pair available in 2Ω and 4Ω versions for motorcycle audio systems. Each speaker combines a moisture-resistant Kevlar® cone, efficient neodymium motor, high-sensitivity design and shallow mounting depth for tight, responsive mid-bass in demanding open-air installations. Choose Impedance View Specifications Responsive Motorcycle Mid-Bass Available in 2Ω and 4Ω configurations Sold as a matched pair 100 watts RMS per speaker 200 watts maximum per speaker Lightweight Kevlar® cones N45H neodymium magnet motors Shallow 2.26-inch mounting depth 6.5-inch grilles and hardware included Rain or Shine™ all-weather construction Cicada CXXM65 Mid-Bass Speaker Overview The Cicada Audio CXXM65 is designed for motorcycle audio systems that need clean, punchy mid-bass without the depth and weight of a conventional automotive woofer. Its lightweight Kevlar® cone is engineered to remain rigid while resisting heat and moisture. Combined with an efficient neodymium motor and 92dB sensitivity, the CXXM65 delivers responsive mid-bass from a properly matched motorcycle amplifier. Select the CXXM65.2 2Ω version or the CXXM65.4 4Ω version based on your amplifier, speaker wiring and final channel impedance requirements. Available Impedance Options and SKUs CXXM65.2 — 2-Ohm Version Select the 2Ω version when your amplifier is stable at the intended 2-ohm channel load and the speaker wiring is designed for the lower impedance. CXXM65.4 — 4-Ohm Version Select the 4Ω version for amplifiers and multi-speaker configurations designed around a 4-ohm channel load. Choose the correct impedance: Your selection must match the amplifier’s rated load, the number of speakers connected to each channel and the final series or parallel wiring configuration. What Comes in the Box Two Cicada Audio CXXM65 6.5-inch mid-bass speakers Selected 2Ω or 4Ω speaker configuration Two protective 6.5-inch speaker grilles Speaker installation hardware Important: Motorcycle-specific speaker adapters, fairing brackets, saddlebag rings, wiring harnesses and amplifier installation components are not included unless specifically added as product options. Why Riders Choose the CXXM65 100W RMS Power Handling Each 6.5-inch speaker handles 100 watts RMS and 200 watts maximum for strong output from a properly matched motorcycle amplifier. 2Ω or 4Ω Variants Two impedance options allow the speakers to be matched to different amplifiers, channel loads and multi-speaker configurations. Kevlar Mid-Bass Cone The lightweight Kevlar® cone is strong, heat resistant and moisture resistant for tight, controlled mid-bass output. High-Sensitivity Design A 92dB sensitivity rating helps the CXXM65 produce clean output without requiring excessive amplifier power. Shallow Mounting Depth A 2.26-inch mounting depth supports motorcycle installations where available fairing, lower or saddlebag space is limited. All-Weather Construction Rain or Shine™ construction and UV-protected surfaces are engineered for exposed motorcycle audio environments. CXXM65 Speaker Technology Kevlar® cone provides a lightweight, rigid, high-temperature and moisture-resistant speaker diaphragm OFC copper voice coil supports efficient conductivity while helping reduce heat generation N45H neodymium motor produces strong output and high efficiency without unnecessary speaker weight Custom-tooled polycarbonate frame is engineered to withstand extreme heat in motorcycle installations UV-protected surfaces help prevent fading and damage from extended sun exposure Cicada CXXM65 Specifications Available Models CXXM65.2 and CXXM65.4 Speaker Size 6.5-inch mid-bass driver Quantity Pair Impedance Options 2Ω or 4Ω 2Ω Variant SKU CXXM65.2 4Ω Variant SKU CXXM65.4 Power Handling 100W RMS / 200W maximum per speaker Cone Material Kevlar® Magnet N45H neodymium Sensitivity 92dB, 1W / 1M Frequency Response 60Hz–5kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Grilles Included Warranty Two-year manufacturer warranty Fitment and Ordering Notes Fitment: The CXXM65 is designed for compatible custom 6.5-inch motorcycle speaker locations. Verify the speaker opening, mounting depth, grille clearance and amplifier impedance before ordering. Select CXXM65.2 for the 2Ω version. Select CXXM65.4 for the 4Ω version. Both variants are sold as a pair. Each speaker is rated for 100 watts RMS. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Verify the 2.26-inch mounting depth and 5.43-inch cutout before installation. Motorcycle-specific adapters or mounting brackets may be required. Apply the correct crossover and amplifier gain settings before extended use. Professional installation and system tuning are recommended. Best For High-output motorcycle fairing audio systems Custom 6.5-inch saddlebag speaker installations Motorcycle lower-fairing speaker locations Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker systems requiring a specific final channel impedance Riders wanting tighter mid-bass from a shallow speaker platform Related Motorcycle Audio Categories Cicada and Motorcycle Speakers Shop Cicada Audio Shop Motorcycle Speakers Motorcycle Speaker Installation Parts Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Lids Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada CXXM65 FAQ Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select CXXM65.2 for the 2Ω speaker pair or CXXM65.4 for the 4Ω speaker pair before adding the product to your cart. Are the CXXM65 speakers sold individually or as a pair? Both the CXXM65.2 and CXXM65.4 variants are sold as a pair. Which impedance should I choose? Choose the impedance supported by your amplifier and complete speaker wiring plan. The final channel load depends on the number of speakers connected and whether they are wired in series or parallel. How much power can the CXXM65 handle? Each speaker is rated for 100 watts RMS and 200 watts maximum power. Are these coaxial speakers? No. The CXXM65 is a dedicated 6.5-inch mid-bass speaker without an integrated tweeter. Are these subwoofers? No. The CXXM65 is a mid-bass speaker with a published frequency response of 60Hz–5kHz. It is not intended to replace a dedicated subwoofer. Are speaker grilles included? Yes. The pair includes two 6.5-inch protective grilles and installation hardware. Will these speakers fit factory Harley-Davidson locations? Fitment depends on the motorcycle year, speaker location, mounting opening, available depth and adapters being used. Model-specific brackets or mounting adapters may be required. Does this speaker pair need an amplifier? A properly matched motorcycle amplifier that is stable at the selected speaker impedance is recommended to take advantage of the speakers’ power handling and output capability. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for both CXXM65 impedance variants. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your motorcycle year, speaker locations, amplifier model and planned wiring. We’ll help determine which CXXM65 impedance is correct and recommend the proper mounting and installation components for your system. Call 864-334-6131 Ask GBS for HelpSale -
Sale
Cicada Audio CXK69 6x9" Component Speaker Kit | 2-Ohm or 4-Ohm
Vendor:Cicada AudioHIGH-OUTPUT 6X9 COMPONENT AUDIO Cicada Audio CXK69 6x9" Component Speaker Kit | 2-Ohm or 4-Ohm The Cicada Audio CXK69 is a complete component speaker system available in 2Ω and 4Ω versions for high-output motorcycle audio builds using compatible 6x9-inch speaker locations. Each kit combines powerful Carbon Matrix Composite mid-bass drivers, separate shallow ring-radiator horn tweeters and external crossovers for strong mid-bass, focused highs and dependable all-weather performance. Choose Impedance View Specifications Serious 6x9 Motorcycle Audio Available in 2Ω and 4Ω configurations High-output 6x9-inch mid-bass drivers 250 watts RMS per mid-bass driver Separate shallow ring-radiator horn tweeters External 12dB crossovers at 7kHz Carbon Matrix Composite™ cones Rain or Shine™ all-weather performance design Cicada CXK69 Component Kit Overview The Cicada Audio CXK69 is built for riders who want more output, stronger mid-bass and better high-frequency projection than a basic coaxial speaker can provide. This component system separates the 6x9-inch mid-bass drivers from the horn tweeters. The mid-bass drivers concentrate on powerful lower and middle frequencies while the dedicated tweeters produce the focused high-frequency output needed for open-road motorcycle listening. Select the CXK69.2 2Ω version or CXK69.4 4Ω version based on your amplifier, channel configuration and total system impedance requirements. Available Impedance Options and SKUs CXK69.2 — 2-Ohm Version Select the 2Ω version when your amplifier is stable at a 2-ohm channel load and the system is designed to produce greater power into the lower impedance. CXK69.4 — 4-Ohm Version Select the 4Ω version for amplifiers and multi-speaker system configurations designed around a 4-ohm channel load. Choose carefully: The correct impedance depends on your amplifier’s rated load, the number of speakers connected to each channel and the final wiring configuration. Do not select impedance based only on which version appears to offer more power. What Comes in the Kit Pair of Cicada Audio 6x9-inch mid-bass drivers in the selected 2Ω or 4Ω configuration Pair of 4Ω 1-inch shallow ring-radiator horn tweeters External component crossovers Important: Motorcycle-specific saddlebag lids, cut-in kits, speaker adapters, grilles, tweeter mounting bridges and wiring harnesses are not included unless specifically stated in the product options. Why Riders Choose This Kit 250W RMS Mid-Bass Drivers The 6x9-inch drivers are engineered for substantial amplifier power and strong output in demanding open-air motorcycle environments. Separate Horn Tweeters Dedicated ring-radiator horn tweeters provide focused high-frequency projection without limiting the movement of the mid-bass cone. 2Ω or 4Ω Variants Two impedance options make it easier to match the component kit to different amplifiers, channel loads and multi-speaker configurations. Carbon Matrix Composite Cone Cicada’s CMC™ cone is lightweight, rigid, heat resistant and designed for efficient, controlled mid-bass performance. External Crossovers Dedicated external crossovers divide the audio signal between the mid-bass drivers and horn tweeters for controlled component operation. All-Weather Construction Rain or Shine™ construction supports real motorcycle use and the changing environmental conditions encountered on the road. Mid-Bass Driver Technology Carbon Matrix Composite™ cone provides a lightweight, strong and high-temperature-resistant speaker diaphragm OFC copper shorting ring helps extend the upper-frequency performance of the 6x9-inch mid-bass driver Black Coat™ OFC copper voice coil supports high conductivity, low resistance and extreme thermal performance N35SH neodymium motor provides strong motor force without the weight of a large conventional ferrite structure Die-cast aluminum basket features Cicada Audio Vortex Flow Venting™ for airflow and structural integrity 6x9-Inch Mid-Bass Specifications Available Models CXK69.2 and CXK69.4 Driver Type 6x9-inch mid-bass driver Impedance Options 2Ω or 4Ω 2Ω Variant SKU CXK69.2 4Ω Variant SKU CXK69.4 Power Handling 250W RMS / 500W maximum Voice Coil 2 inches / 51mm Cone Material Carbon Matrix Composite™ Magnet N35SH neodymium Sensitivity 94dB, 1W / 1M Frequency Response 70Hz–10kHz ±3dB Mounting Depth 3.26 inches / 83mm Mounting Diameter 5.7 × 8.5 inches / 145 × 216mm Horn Tweeter and Crossover Specifications Tweeter Type 1-inch shallow ring-radiator horn tweeter Tweeter Impedance 4Ω Power Handling 50W RMS / 100W maximum Voice Coil 1 inch / 25mm Tweeter Dome Aluminum Magnet N35SH neodymium Sensitivity 101dB, 1W / 1M Frequency Response 2kHz–20kHz ±3dB Mounting Depth 1.1 inches / 28mm Mounting Diameter 2 inches / 50.8mm Crossover External 12dB crossover at 7kHz Fitment and Ordering Notes Fitment: The CXK69 is a component speaker system for compatible 6x9-inch speaker locations. Verify your motorcycle year, model, saddlebag lid configuration, mounting depth, required adapters and amplifier impedance requirements before ordering. Select CXK69.2 for the 2Ω mid-bass version. Select CXK69.4 for the 4Ω mid-bass version. Both kit variants include 4Ω horn tweeters. Use an amplifier stable at the final impedance presented by the speaker wiring. Do not connect a 2Ω load to an amplifier channel that is not rated for 2Ω operation. Harley-Davidson saddlebag installations require compatible 6x9 speaker lids or a cut-in lid kit. Some factory speaker lids may require model-specific mounting adapters. Confirm tweeter, crossover and wiring placement before beginning installation. Apply the correct high-pass crossover and amplifier gain settings. Professional installation and system tuning are recommended. Best For High-output motorcycle saddlebag audio systems Compatible 6x9-inch Harley-Davidson speaker lids Custom saddlebag speaker installations Amplified systems requiring a 2Ω speaker option Amplified systems requiring a 4Ω speaker option Multi-speaker builds requiring specific final channel impedance Riders wanting stronger mid-bass and focused high-frequency output Related Motorcycle Audio Categories Speakers and Saddlebag Lids Shop Cicada Audio Shop Motorcycle Speakers Motorcycle Speaker Lids Amplifiers and Signal Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Speaker Installation Parts Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Cicada CXK69 FAQ Is the CXK69 a coaxial or component speaker system? The CXK69 is a component system with separate 6x9-inch mid-bass drivers, horn tweeters and external crossovers. Is this listing for the 2Ω or 4Ω version? This single listing includes both versions. Select CXK69.2 for the 2Ω mid-bass kit or CXK69.4 for the 4Ω mid-bass kit before adding the product to your cart. Are the tweeters also available in 2Ω and 4Ω versions? No. The separate ring-radiator horn tweeters supplied with both CXK69 variants are rated at 4Ω. Which impedance should I choose? Choose the impedance supported by your amplifier and overall speaker wiring plan. The 2Ω version can allow a compatible amplifier to produce more power, while the 4Ω version may be better suited to multi-speaker configurations or amplifiers designed around a 4-ohm channel load. How much power can the 6x9 speakers handle? Each 6x9-inch mid-bass driver is rated for 250 watts RMS and 500 watts maximum power. Does this kit include separate tweeters? Yes. The system includes separate shallow ring-radiator horn tweeters designed to operate through the included external crossovers. Will these speakers fit factory Harley saddlebag lids? Fitment depends on the motorcycle year, factory lid configuration, speaker opening, mounting depth and adapters being used. Compatible 6x9 speaker lids or a model-specific cut-in kit may be required. Are saddlebag lids included? No. Saddlebag lids, cut-in kits, grilles and model-specific adapters are sold separately unless specifically added as a product option. Does this component kit need an amplifier? A properly matched motorcycle amplifier is recommended to take advantage of the system’s power handling and output capability. What warranty does Cicada Audio provide? Cicada Audio lists a two-year manufacturer warranty for the mid-bass drivers and tweeters. Need Help Choosing 2 Ohms or 4 Ohms? Call Garage Bagger Stereo with your motorcycle year, model, saddlebag lid configuration, amplifier and planned speaker wiring. We’ll help determine which CXK69 impedance is correct and recommend the proper lid kit, wiring and supporting equipment. Call 864-334-6131 Ask GBS for HelpSale -
DS18 PRO-CF6 — 6.5" Slim Carbon Fiber Motorcycle Loudspeaker
Vendor:DS18DS18 MOTORCYCLE LOUDSPEAKER DS18 PRO-CF6 6.5" Slim Carbon Fiber Motorcycle Loudspeaker The DS18 PRO-CF6 is a 6.5 inch slim carbon fiber loudspeaker built for motorcycle, powersports, ATV, UTV, and custom audio systems where space is tight but output still matters. Its shallow mounting depth, neodymium motor, 150W RMS power handling, and water-resistant carbon fiber cone make it a strong fit for fairings, pods, lids, lowers, and tight custom locations. View Specs Need Help? Slim Fitment with Serious Output 6.5 inch slim motorcycle loudspeaker 150W RMS / 300W max power handling Water-resistant carbon fiber cone Neodymium magnet 93dB sensitivity 2Ω and 4Ω options 2.3 inch mounting depth DS18 PRO-CF6 Motorcycle Speaker Overview The DS18 PRO-CF6 is built for riders who need a shallow 6.5 inch speaker with strong midrange output, efficient performance, and motorcycle-ready construction. This speaker is a strong fit for Harley-Davidson, Indian, powersports, ATV, UTV, and custom audio systems where mounting depth and output both matter. With its slim profile, water-resistant carbon fiber cone, and neodymium motor structure, the PRO-CF6 works well in fairing speaker upgrades, lower fairing locations, saddlebag lid builds, pods, and custom mounting locations where deeper speakers may not fit. Why Riders Choose It Shallow 6.5" Design The PRO-CF6 is built for tight motorcycle and powersports installs where a standard-depth speaker may not work. Carbon Fiber Cone The water-resistant carbon fiber cone helps deliver durable output for real riding conditions and open-air audio systems. Neodymium Magnet The neodymium motor helps reduce weight while still supporting strong control and efficient output. 150W RMS Power With 150W RMS and 300W max power handling, this speaker is built for loud, clean midrange performance. 2Ω and 4Ω Options Choose the correct impedance option to match your amplifier, wiring layout, and system design. High-Output Builds This speaker is a strong choice for Harley, Indian, powersports, and custom motorcycle audio systems. Best With Harley-Davidson motorcycle audio builds Indian motorcycle audio upgrades Fairing speaker installations Lower fairing speaker upgrades Saddlebag lid speaker builds Custom motorcycle speaker pods ATV, UTV, and powersports audio systems Motorcycle amplifiers with proper high-pass crossover setup Systems needing slim mounting depth and strong midrange output Sold individually. Grilles are not included. Key Specifications Speaker Model DS18 PRO-CF6 Speaker Type 6.5 inch slim carbon fiber motorcycle loudspeaker Size 6.5" / 165mm Power Handling 150W RMS / 300W Max Impedance Options 2Ω or 4Ω Sensitivity 93dB Frequency Response 100Hz – 6kHz Recommended High-Pass 120Hz Cone / Dust Cap Water-resistant carbon fiber Voice Coil 1.5" / 38mm CCAW on Kapton former Magnet Neodymium Mounting Depth 2.3" / 58mm Cutout 5.6" / 144mm Always verify depth, cutout, impedance, crossover settings, and amplifier power before final installation. Garage Bagger Stereo Advantage Speaker matching for Harley-Davidson, Indian, and powersports builds Clean amplifier pairing and crossover recommendations Tech support for fitment, wiring, and tuning Real motorcycle audio experience from Garage Bagger Stereo Important Installation Notes Sold individually unless otherwise stated. Grilles are not included. Choose the correct 2Ω or 4Ω version for your amplifier setup. Use proper crossover settings before playing at high volume. Confirm mounting depth and cutout before installation. Professional installation is recommended for custom motorcycle audio builds. Related Motorcycle Audio Categories Motorcycle Speakers Motorcycle Speakers 6.5 Inch Midrange Motorcycle Speakers 6.5 Inch Pro Coaxial Motorcycle Speakers Amplifiers and Wiring Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP & Signal Integration Install Support Motorcycle Speaker Installation Parts Motorcycle Speaker Lids Motorcycle Audio Installation in Taylors, SC DS18 PRO-CF6 FAQ Is the DS18 PRO-CF6 sold as a single speaker? Yes. The DS18 PRO-CF6 is sold individually unless otherwise stated. Does the DS18 PRO-CF6 include grilles? No. Grilles are not included. Is this speaker good for motorcycle audio? Yes. The slim design, carbon fiber cone, neodymium magnet, and shallow mounting depth make it a strong option for motorcycle and powersports audio systems. What amplifier should I use? The correct amplifier depends on whether you choose the 2Ω or 4Ω version, how many speakers are being used, and the rest of the system design. What high-pass crossover should I use? The recommended high-pass point is 120Hz. Final tuning may vary based on the bike, speaker location, amplifier power, and system goals. Need Help Matching This Speaker? Call Garage Bagger Stereo with your bike, speaker locations, and amplifier setup. We’ll help match the right impedance, amplifier power, and tuning direction for your build. Call 864-334-6131 Ask GBS for Help
THE REFERENCE STANDARD FOR CLEAN POWER INTEGRATION
Plug-and-play is how you build it right the first time—clean signal, correct turn-on behavior, and platform-correct integration without hacks. This is the GBS standard for real output at highway speed.
- No factory wire cutting — no guessing
- Platform-correct harnessing and signal integration
- Compact, motorcycle-ready form factors for real installs
WHAT YOU’RE BUILDING
- Clean install with correct integration
- Real power without splicing
- Factory or aftermarket radio compatibility
- Highway-speed performance you can trust
Plug-and-play amplifiers are the fastest way to go from “stock” to “built right” — clean integration first, then power and tuning.
Why Choose Plug-and-Play Amplifiers for Your Motorcycle
Not all amplifiers are motorcycle-ready. Plug-and-play amplifiers eliminate installation headaches by using platform-correct harnessing, proper signal integration, and compact form factors designed for fairings and saddlebag locations.
- No factory wire cutting — keep the bike clean and serviceable.
- Faster, cleaner installs using bike-specific wiring and mounting solutions.
- Proper signal voltage and turn-on behavior for reliable system operation.
- Compatibility with factory and aftermarket radios when paired with the correct harnessing.
- Reliable performance at highway speed — clean power delivery you can hear.
Built for Harley Touring Platforms
These plug-and-play amplifiers are designed to work with Harley-Davidson touring motorcycles when paired with the correct harnessing and installation parts.
- 2014–2023 Harley touring models
- 2023.5+ CVO and 2024+ touring platforms
- Fairing-mounted amplifier installs
- Saddlebag and rear speaker systems
Always confirm platform year and radio configuration before ordering.
What’s Included in This Plug-and-Play Amplifier Collection
- Motorcycle-specific plug-and-play amplifiers
- Amplifiers designed for fairing and saddlebag installs
- Compatible options for factory and aftermarket radios
- Power solutions for front stage, rear speakers, and subwoofers
- Amplifiers ready for DSP integration
Build the System the Right Way
A plug-and-play amplifier is one part of a complete system. For best results, pair your amplifier with platform-correct speakers, DSP tuning, and installation hardware.
If you’re unsure which amplifier fits your bike or goals, Garage Bagger Stereo can help you select the correct configuration.
High-output systems start with clean integration. Build it once, build it right.
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.