1998-2013 Harley Cut-In Lid Kits
1998-2013 Harley-Davidson 6x9 cut-in saddlebag lid kits from Cerwin-Vega, Diamond Audio and Rockford Fosgate. Compare speaker brand and power handling, and ask us to confirm fitment for your bags.
THE REFERENCE STANDARD
Build It Right the First Time
Not sure which parts fit your exact bike and setup? Start with a clean, correct plan.
- Fitment confirmed for your exact bike and year
- Parts matched to your speakers and amplifier
- Build help from a GBS specialist
Browse Collections
-
SaleCerwin-Vega 98-13 Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 98-13 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Plug-and-play wiring harness Recommended For Extra Protection FSWPG69 Water Repelling Grill Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment Harley Davidson® 1998-2013 models Upgrade to Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that upgrades your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 1998-2013 Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley.Sale -
SaleDiamond Audio 98-13 Harley Davidson Cut-In Lid Kit w/Speakers
Vendor:Diamond AudioDiamond Audio 98-13 Harley Davidson Cut-In Lid Kit w/Speakers Diamond Audio Harley Davidson Motorcycle Audio Fitment Harley Davidson® 1998-2013 models Get More Sound from Your Lids with Diamond Audio's Cut-In Lid Kits Upgrade your ride with Diamond Audio's Cut-in Lid Kits, custom-engineered for 1998-2013 Harley Davidson® motorcycles. This premier audio upgrade brings unparalleled clarity and power to your journey, ensuring every ride is an adventure in sound. Seamless Integration Designed specifically for Harley Davidson® models from 1998-2013, Diamond Audio guarantees a perfect fit and a factory-finish appearance, blending effortlessly with your bike's aesthetic. Choices in 6x9" Speakers include: HXM69F4 (4Ω) 2-Way Marine Speakers w/Titanium Dome Tweeter (4Ω) 6"x9" 2-Way Speaker System (Pair) 150W RMS / 450W MAX Power Rating Flush Mount Design Water Spray and Salt Water Resistant, 100% UV Stable Ultra Small Neodymium Motor Structure With Max Xmax Suspension High Temp Injection Molded Composite Basket Molded, UV-Coated, Patent Pending Waterproof Injection PP Cone Integrated Dream RGB LED Lighting Mounting Diameter: 8.64” x 6.0” / 219 x 152.5mm Mounting Depth: 3.15” / 80mm MS692CX2(2Ω) 2-Way Coaxial Subwoofers w/Titanium Dome Tweeter (2Ω) 6"x9" 2-Way Speaker System (Pair) Power Handling Watts (RMS/Peak): 130W/520W Nominal Impedance (Ω): 2Ω Frequency Response (Hz): 45Hz-23kHz Voice Coil: 1.66" (42.2mm) Fs - Free Air Resonance (Hz): 46Hz Qts: 0.51 Vas ft³ (Liter): 0.794" (22.5L) Sensitivity (1W/1M): 87.6db Sensitivity( 2.83V/1M): 94.6db Xmax (mm): 0.315" (8mm) Mounting Depth: 3.818” (97mm) Mounting Diameter: 5.98”x8.85” (152mmX225mm) Manufactured to IPx65 Marine Grade Compliant Specifications 1" High Output Titanium Dome Tweeter UV-Treated Thermal Molded Waterproof Kevlar Cone with Rubber Surround 12dB Bessel Crossover Network Super High Energy Ferrite Motor System With Milled Aluminum Top Plate T-Yoke Back Plate Drilled For 35% More Cooling, Increased Power Handling High-Temperature Cast Aluminum Basket Coax-sub HXM69F2 (2Ω) 2-Way Marine Speakers w/Titanium Dome Tweeter (2Ω) 6"x9" 2-Way Speaker System (Pair) 150W RMS/450W MAX Power Rating Flush Mount Design Water Resistant, 100% UV Stable Ultra Small Neodymium Motor Structure With Max Xmax Suspension High Temp Injection Molded Composite Basket Molded, UV-Coated, Patent Pending Waterproof Injection PP Cone Integrated Dream RGB LED Lighting Mounting Diameter: 8.64" x 6.0" / 219 x 152.5mm Mounting Depth: 3.15" / 80m MS69CX (4Ω) 2-Way Coaxial Subwoofers w/Titanium Dome Tweeter (4Ω) 6"x9" 2-Way Speaker System (Pair) Power Handling Watts (RMS/Peak): 125W/500W Nominal Impedance (Ω): 4Ω Frequency Response (Hz): 46Hz-20kHz Voice Coil: 1.66" (42.2mm) Fs - Free Air Resonance (Hz): 46Hz Qts: 0.57 Vas ft³ (Liter): 0.829" (23.5L) Sensitivity (1W/1M): 87.4db Sensitivity( 2.83V/1M): 91.1db Xmax (mm): 0.315" (8mm) Mounting Depth: 3.81” (97mm) Mounting Diameter: 5.98” x 8.85” (152mm x 225mm) Manufactured to IPx65 Marine Grade Compliant Specifications 1" High Output Titanium Dome Tweeter UV-Treated Thermal Molded Waterproof Kevlar Cone with Rubber Surround 12dB Bessel Crossover Network Super High Energy Ferrite Motor System With Milled Aluminum Top Plate T-Yoke Back Plate Drilled For 35% More Cooling, Increased Power Handling High-Temperature Cast Aluminum Basket Coax-Sub MP694 (4Ω) 2-Way Full-Range Coaxial Speakers w/1" Horn Tweeters (4Ω) 6"x9" 2-Way Speaker System (Pair) Power: 150W RMS/300W MAX SPL(dB) MidBass: 95.6 SPL(dB) Tweeter: 107 Fs(Hz): 82.6 Hi-pass Filter: 12dB 2nd Order Crossover Diameter: 9.33"x6.57" (237mm x 167mm) Mounting Diameter: 8.86"x5.98" (225mm x 152mm) Mounting Depth: 3.99" (101.3mm) Total Depth: 4.26" (108.3mm) Magnet Diameter: 3.94" (100mm) NEO Magnet Heavy Duty Steel Basket Mid Driver: 1.5" Single Layer High Temp 4Ω Voice Coil Tweeter: 1.0" 8 Ohm - Single Layer High Temp Voice Coil Frequency Response: 80Hz -18Khz High Sensitivity 101dB 1W/1M 12dB 2nd Order Filter Crossover MP692 (2Ω) 2-Way Full-Range Coaxial Speakers w/1" Horn Tweeters (2Ω) 6"x9" PRO Full-Range Co-Ax Horn Speaker 250W RMS/500 MAX Power Handling Ferrite Strontium High Temp Magnet structure Heavy Duty Die-cast Aluminum Basket Advanced Voice Coil Heat Sink Design for Better Heat Dissipation 1.5" Single Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer 1.0" Single Layer High Temp Voice Coil with Black Coated VC former for Tweeter Frequency Response: 80Hz -18Khz High Sensitivity 101dB 1W/1M 12dB Crossover Mounting Depth: 3.99" / 101.3mm Mounting Diameter: 8.86" x 5.98" (225 x 152mm) MS69NEO (4Ω) MSNEO SERIES High Output Neo Midrange Speakers (4Ω) Power: 350W RMS/700W MAX SPL(dB): 96 Fs(Hz): 90 Frequency Response: 90Hz-10kHz Diameter: 9.193" x 6.378" (233.5mm x 162mm) Mounting Diameter: 8.583" x 5.748" (218mm x 146mm) Mounting Depth: 3.091" (78.5mm) Magnet Diameter: Heavy Duty Industrial Cast Aluminum Basket Waterproof Black DUPONT™ Kevlar Cone Neodymium Magnet Motor Structure US manufactured 2” Black High Temperature Coated Voice CoilSale -
Rockford Fosgate 98-13 Harley-Davidson® 6x9" Rear Audio Lid Kit
Vendor:Rockford FosgateRockford Fosgate 98-13 Harley-Davidson® 6x9" Rear Audio Lid Kit Retrofit kit allows the addition of rear speakers on your existing factory bag lids. Eliminates the need to paint and color match. Integrates into existing HD9813RG-TKIT & HD9813SG-TKIT audio systems. Are you someone who’s been thinking of adding rear speakers to your Harley-Davidson® bags but didn’t want to buy a new set of bag lids? Not to mention the expense of painting them to match your bike? Well, we have the answer to your problems. The TMS69BL9813 allows you to add rear speakers to your existing factory bag lids with our easy-to-use cutting guide and mounting system. The best part is that it will easily integrate into an existing Rockford Fosgate audio system like the HD9813RG-TKIT or HD9813SG-TKIT. The kit is custom designed to retrofit onto 1998 to 2013 Harley-Davidson® Road Glide® or Street Glide® motorcycles with hard-shell bags and includes all hardware and integrated grille assemblies. Harley-Davidson®, Road Glide®, and Street Glide® are registered trademarks of Harley-Davidson Motor Company Compatible with 1998-2013 Factory Harley-Davidson® Hardshell Bag Lids Designed for use with existing HD9813RG-TKIT and HD9813SG-TKIT audio systems Ultra‐High Temperature Glass Re‐Inforced Polymer Frame Direct Connect Wiring Harness Painted Stamped Steel Grill with ASA Plastic Frame for UV Protection Sandwich Clamping Gasket Design for Environmental Seal Includes Custom Cut-Out Guide Includes TMS69 Power Element Ready 6x9” full-range speakers Includes all Installation Hardware and Accessories Patent Pending Plug-N-Play Operation not Compatible With Tour-Pak® Speakers (contact support) NOTE: May not be compatible with CVO™ and Screaming Eagle™ models May not be compatible with H-D® Power Lock Kit Leave 2" minimum clearance under the speaker magnet when packing bags -
SaleHertz HSP3-13 4-Speaker Kit with Saddlebag 6x9 Lids for 1998-2013 Harley
Vendor:HertzHertz HSP3-13 4-Speaker Kit with Saddlebag 6x9 Lids for 1998-2013 Harley The Hertz HSP3-13 is a plug and play four-speaker sound pack for 1998-2013 Harley-Davidson touring bikes. It puts an SP 4.900 four-channel amplifier behind a pair of SX 165 NEO fairing speakers and a pair of SX 690 NEO.1 6×9 speakers in the saddlebag lids. The kit ships with the HD13H saddlebag lid kit and speaker harness, the HTHP13 T-Power harness, the HD13AP amplifier mounting bracket and both Street Glide and Road Glide front speaker grilles. Shop HertzHarley Plug and Play Kits1998-2013 Harley Audio 1998-2013 HARLEY-DAVIDSON FAIRING AND SADDLEBAG SOUND PACKFour-Speaker 1998-2013 Sound Pack SP 4.900 power for fairing and saddlebag speakers in one 1998-2013 kit. 250W RMS × 4 at 2Ω / 160W RMS × 4 at 4Ω SX 165 NEO fairing pair + SX 690 NEO.1 6×9 pair HD13H lid kit, HTHP13 harness, SG and RG grilles Start a Build ConsultationCall 864-334-6131 Amplifier mounting: The included HD13AP is listed as an amplifier mounting plate and bracket mount for Road Glide. On a Street Glide or other batwing bike, confirm the amplifier location with us before ordering. Key Product Details Kit Model / SKU HSP3-13 Brand Hertz (Elettromedia) Vehicle Application 1998-2013 Harley-Davidson touring models Amplifier Hertz SP 4.900 four-channel Fairing Speakers Hertz SX 165 NEO 6.5-inch coaxials (pair) Saddlebag Speakers Hertz SX 690 NEO.1 6×9 three-way coaxials (pair) Speaker Impedance 4Ω per speaker Saddlebag Lid Kit HD13H lid kit with speaker harness Power Harness HTHP13 T-Power harness Amplifier Mount HD13AP amplifier mounting bracket Front Grilles Street Glide and Road Glide speaker grilles Speakers in Kit Four Listed for 1998-2013 Harley-Davidson touring models. Verify your year, fairing style, factory radio and saddlebag lids before ordering.Hertz Front and Saddlebag Audio for 1998-2013 Harley-Davidson The HSP3-13 covers both ends of a 1998-2013 bagger in one box. The SX 165 NEO coaxials go in the front fairing and the SX 690 NEO.1 6×9 speakers go in the saddlebag lids through the included HD13H lid kit. All four speakers are 4Ω and the SP 4.900 is rated for a 2Ω minimum load per channel in four-channel mode. The HTHP13 T-Power harness and HD13AP bracket are the install parts American Hard Bag supplies for this generation of bike. SP 4.900 Amplifier: Four channels of D-class power in an IP55 aluminum chassis with no cooling fan and sealed connections. Hertz rates it at 160W RMS × 4 at 4Ω. Fairing Pair: Two SX 165 NEO two-way coaxials, 4Ω, rated 100W continuous each, with 96.5dB sensitivity. Saddlebag Pair: Two SX 690 NEO.1 6×9 three-way coaxials, 4Ω, rated 130W continuous each, with 94dB sensitivity. Factory Radio Signal: The SP 4.900 takes pre-amp or speaker-level input and includes USS for head units that check for a speaker load.What's Included and Specifications Hertz SP 4.900 Four-Channel Amplifier IP55 D-class amplifier rated 160W RMS × 4 at 4Ω, 250W RMS × 4 at 2Ω or 500W RMS × 2 bridged at 4Ω, with USS for factory head units that use speaker load detection. HD13AP Amplifier Mounting Bracket Amplifier mounting plate and bracket mount (listed for Road Glide). Hertz SX 165 NEO Coaxial Speakers 6.5-inch two-way SPL coaxials, 4Ω, 100W continuous / 200W peak, 96.5dB sensitivity, neodymium motors and water-repellent, anti-UV cones. Hertz SX 690 NEO.1 3-Way Speakers 6×9-inch three-way coaxials, 4Ω, 130W continuous / 260W peak, 94dB sensitivity, 1.4-inch dome tweeter plus 1-inch super tweeter. HTHP13 T-Power Harness 1998-2013 T-Power harness supplied with the kit. HD13H Saddlebag Lid Kit with Speaker Harness 1998-2013 saddlebag lid kit with speaker harness for the 6×9 speakers. Street Glide and Road Glide Speaker Grilles Both front speaker grille styles are included in the kit. Kit contents are listed as published on the Elettromedia (Hertz) 2026 Hertz Moto price sheet. Component specifications are from Hertz product pages. SP 4.900 Amplifier Specifications Amplifier Model Hertz SPL Show SP 4.900 Amplifier Type Four-channel D-class amplifier (Hertz ADC output stage) Output at 4Ω 160W RMS × 4 channels at 14.4V Output at 2Ω 250W RMS × 4 channels at 14.4V Bridged Output 500W RMS × 2 channels at 4Ω, 14.4V Total RMS Power 1000W Minimum Load 2Ω in 4-channel mode / 4Ω bridged Chassis Protection IP55 aluminum chassis, no cooling fan, sealed power, input and speaker connections Inputs Pre-in (0.6–6 V RMS) and speaker-level in (2.2–22 V RMS) Speaker Load Detection USS (Universal Speakers Simulator) for head units with speaker load detection Crossovers Ch 1-2 high-pass / low-pass 50Hz–5kHz, Ch 3-4 high-pass 50Hz–5kHz, 12dB/octave Bass Boost 0–8dB (low-pass on only) Bandwidth 10Hz–35kHz (−3dB) Signal-to-Noise Ratio 105 dBA THD 0.02% at 100Hz, 4Ω, 70% rated power Damping Factor 200 Power Supply 11–15 VDC nominal / 6–16 VDC operating Dimensions 211.6 × 130 × 49 mm (8.3 × 5.1 × 1.9 in) Weight 2.15 kg SX 165 NEO Fairing Speakers Speaker Model Hertz SPL Show SX 165 NEO Speaker Type 6.5-inch (165mm) two-way SPL coaxial Quantity One pair Impedance 4Ω Power Handling 100W continuous / 200W peak per speaker Sensitivity 96.5dB Frequency Response 100Hz–20kHz Woofer Voice Coil 38mm Tweeter 35mm (1.4 in) neodymium PEI dome with resettable protection circuit Magnets N38H neodymium Cone Water-repellent pressed paper with anti-UV treatment Terminals Double Faston terminals SX 690 NEO.1 Saddlebag Speakers Speaker Model Hertz SPL Show SX 690 NEO.1 Speaker Type 6×9-inch three-way coaxial (1.4-in dome tweeter + 1-in dome super tweeter) Quantity One pair Impedance 4Ω Power Handling 130W continuous / 260W peak per speaker Sensitivity 94dB Woofer Voice Coil 38mm Magnets N38H neodymium Cone Water-repellent pressed paper with anti-UV treatment Tweeter Protection Resettable solid-state protection circuit Terminals Double Faston terminals Recommended System Planning The HTHP13 T-Power harness and HD13H lid harness are part of the kit, and the amplifier mounts on the HD13AP bracket. Both Street Glide and Road Glide front grilles are in the box, so the kit is not limited to one fairing style. We install Hertz kits at our Taylors, SC shop. If you are doing it yourself, call us before you start so we can walk through the parts for your exact bike. Gain setting matters: At 4Ω the SP 4.900 is rated for 160W RMS per channel, which is more than the continuous rating of every speaker in this kit. Set the gains so each channel stays inside the speaker's continuous rating. Saddlebag lids: Confirm your saddlebag lid style and any lid modification needed for the HD13H kit before you start.What to Pair With the HSP3-13 Everything to run the kit is in the box. These are the same parts sold on their own, plus power support. Hertz SP 4.900 Amplifier The IP55 four-channel amplifier used in every Hertz sound pack, sold on its own. Hertz SX 165 NEO 6.5-inch Coaxials The fairing coaxial pair from this kit, sold separately as a replacement or spare pair. Hertz SX 690 NEO.1 6x9 Speakers The 6x9 three-way pair from this kit, sold separately. Motorcycle Audio Batteries Battery upgrades for builds that run the amplifier hard. Ask us whether your charging system needs one. Related Hertz & Motorcycle Audio Paths Build around the right parts for a 1998-2013 bagger. Shop Hertz Motorcycle Audio 1998-2013 Harley-Davidson Audio 1998-2013 Harley Speaker Lids Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Hertz HSP3 for 2014-2023 Harley Best Use for the HSP3-13 1998-2013 Street Glide and Road Glide owners who want front and saddlebag speakers powered by one IP55 amplifier while keeping the factory radio. Built Around Real Motorcycle Audio Wind, road speed and weather all work against bagger audio. Neodymium SPL speakers with weather-treated cones and a sealed IP55 amplifier are what this kit is built on. Hertz HSP3-13 FAQ What comes in the HSP3-13 kit? An SP 4.900 amplifier, HD13AP amplifier mounting bracket, SX 165 NEO coaxial speakers, SX 690 NEO.1 6x9 3-way speakers, the HTHP13 T-Power harness, the HD13H saddlebag lid kit with speaker harness, and both Street Glide and Road Glide speaker grilles. Which years does it fit? Hertz lists the HSP3-13 for 1998-2013 Harley-Davidson motorcycles. Confirm your exact bike with us before ordering. Does it fit Street Glide and Road Glide? The kit includes both Street Glide and Road Glide front speaker grilles. The HD13AP amplifier bracket is listed for Road Glide, so call us to confirm amplifier mounting on a Street Glide. What impedance are the speakers? All four speakers are 4 ohms. How much power does the SP 4.900 make? Hertz rates the SP 4.900 at 160W RMS × 4 at 4Ω, 250W RMS × 4 at 2Ω and 500W RMS × 2 bridged at 4Ω, 1000W RMS total at 14.4V. Will the amplifier work with a factory head unit? The SP 4.900 accepts pre-amp or speaker-level input and includes USS (Universal Speakers Simulator) for head units with speaker load detection. Can the amplifier overpower the speakers? Yes, if the gains are set too high. The SP 4.900 is rated 160W RMS per channel at 4 ohms, while the SX 165 NEO is rated 100W continuous and the SX 690 NEO.1 130W continuous. Set the gains to protect the speakers. Are the speakers weather resistant? Hertz SPL Show NEO speakers use water-repellent pressed-paper cones with water, humidity and anti-UV treatment, and the SP 4.900 uses an IP55-rated aluminum chassis.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz HD13H 6x9 Saddlebag Lid Kit with SX 690 NEO.1 Speakers for 1998-2013 Harley
Vendor:HertzHertz HD13H 6x9 Saddlebag Lid Kit with SX 690 NEO.1 Speakers for 1998-2013 Harley The Hertz HD13H 6x9 Kit pairs the HD13H saddlebag lid kit and speaker harness with a set of SX 690 NEO.1 6×9 three-way speakers for 1998-2013 Harley-Davidson touring bikes. It is the saddlebag half of the Hertz sound pack, sold on its own for bikes that already have front speakers and an amplifier channel pair ready for the rear. Shop Hertz1998-2013 Speaker Lids1998-2013 Harley Audio 1998-2013 HARLEY-DAVIDSON 6×9 SADDLEBAG SPEAKER KIT1998-2013 6×9 Saddlebag Kit Hertz 6×9 saddlebag speakers and lid kit for 1998-2013 Harley-Davidson. HD13H lid kit with speaker harness Two SX 690 NEO.1 6×9 three-way speakers 4Ω, 130W continuous / 260W peak each Start a Build ConsultationCall 864-334-6131 Amplifier required: This kit does not include an amplifier. Each 4Ω speaker needs its own amplifier channel. Plan the amplifier before you order. Key Product Details Kit Model / SKU HD13H6x9 Brand Hertz (Elettromedia) Vehicle Application 1998-2013 Harley-Davidson touring saddlebags Lid Kit HD13H saddlebag lid kit with speaker harness Speakers SX 690 NEO.1 6×9 three-way (pair) Speaker Impedance 4Ω per speaker Power Handling 130W continuous / 260W peak per speaker Amplifier Included No Speakers in Kit Two Listed for 1998-2013 Harley-Davidson touring saddlebags. Verify your year, saddlebag lids and amplifier plan before ordering.Hertz 6×9 Saddlebag Audio for 1998-2013 Harley-Davidson The HD13H 6x9 Kit puts a pair of SX 690 NEO.1 6×9 speakers in the saddlebag lids using the HD13H lid kit and its speaker harness. The kit does not include an amplifier. Each speaker is 4Ω and rated 130W continuous, so plan an amplifier channel for each speaker before you order. SX 690 NEO.1: 6×9 three-way coaxial with a 1.4-inch dome tweeter and 1-inch super tweeter, N38H neodymium magnet and water-repellent, anti-UV cone. Amplifier Required: No amplifier in this kit. The Hertz SP 4.900 used in the Hertz sound packs is rated 160W RMS × 4 at 4Ω, so gains must be set inside the speaker's 130W continuous rating.What's Included and Specifications HD13H Saddlebag Lid Kit with Speaker Harness 1998-2013 saddlebag lid kit with speaker harness. Hertz SX 690 NEO.1 3-Way Speakers 6×9-inch three-way coaxials, 4Ω, 130W continuous / 260W peak, 94dB sensitivity, 1.4-inch dome tweeter plus 1-inch super tweeter. Kit contents are listed as published on the Elettromedia (Hertz) 2026 Hertz Moto price sheet. Component specifications are from Hertz product pages. SX 690 NEO.1 Saddlebag Speakers Speaker Model Hertz SPL Show SX 690 NEO.1 Speaker Type 6×9-inch three-way coaxial (1.4-in dome tweeter + 1-in dome super tweeter) Quantity One pair Impedance 4Ω Power Handling 130W continuous / 260W peak per speaker Sensitivity 94dB Woofer Voice Coil 38mm Magnets N38H neodymium Cone Water-repellent pressed paper with anti-UV treatment Tweeter Protection Resettable solid-state protection circuit Terminals Double Faston terminals Recommended System Planning The HD13H lid kit includes the speaker harness for the saddlebag speakers. Confirm your lid style and any lid modification needed before you start. We install saddlebag speaker kits at our Taylors, SC shop. If you are doing it yourself, call us first so we can confirm parts for your bike. Lid modification: Check speaker clearance, lid hardware and harness routing before modifying any saddlebag lid.What to Pair With the HD13H 6x9 This kit needs amplifier power. These are the parts to plan it with. Hertz SP 4.900 Amplifier The IP55 four-channel amplifier used in every Hertz sound pack, sold on its own. Hertz SX 690 NEO.1 6x9 Speakers The 6x9 three-way pair from this kit, sold separately. Motorcycle Amplifiers Other four-channel amplifiers if you are planning a different power level. Motorcycle Audio Batteries Battery upgrades for builds that run the amplifier hard. Ask us whether your charging system needs one. Related Hertz & Motorcycle Audio Paths Build around the right parts for 1998-2013 saddlebags. Shop Hertz Motorcycle Audio 1998-2013 Harley Speaker Lids 1998-2013 Harley-Davidson Audio Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle 6x9 Speakers Best Use for the HD13H 6x9 Kit 1998-2013 baggers adding saddlebag speakers to a system with an open amplifier channel pair. Built Around Real Motorcycle Audio Saddlebag speakers fill in the sound behind the rider at speed. The SX 690 NEO.1 uses weather-treated cones and neodymium magnets for high output in a light package. Hertz HD13H 6x9 Kit FAQ What comes in the HD13H 6x9 Kit? The HD13H saddlebag lid kit with speaker harness and a pair of SX 690 NEO.1 6x9 three-way speakers. Which years does it fit? Hertz lists it for 1998-2013 Harley-Davidson motorcycles. Confirm your exact bike with us before ordering. Is an amplifier included? No. Plan an amplifier channel for each 4-ohm speaker. How much power can the speakers handle? Hertz rates the SX 690 NEO.1 at 130W continuous and 260W peak per speaker, 4 ohms, 94dB sensitivity. Is a speaker harness included? Yes. The HD13H lid kit includes a speaker harness. Are the speakers weather resistant? Hertz uses water-repellent pressed-paper cones with water, humidity and anti-UV treatment on the SPL Show NEO 6x9 speakers.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale
1998-2013 Cut-In Lid Kits at a Glance
| Kits | Cerwin-Vega, Diamond Audio and Rockford Fosgate |
| Speaker Size | 6x9" rear speakers |
| Fitment | 1998-2013 Harley-Davidson saddlebag lids |
| Included | Cerwin-Vega and Diamond Audio kits include speakers |
| Best For | Adding rear speakers while keeping factory lids |
Summarized from the products in this collection. Confirm your model, year and fitment on each product page before ordering.
1998-2013 Harley Cut-In Lid Kits
Cut-in lid kits add 6x9" rear speakers to compatible factory saddlebag lids on 1998-2013 Harley-Davidson touring bikes, so you keep the original lid.
Review each listing for what is included, the lid application and the cutting and installation requirements before you start.
Related Shopping
Build out the rear section.
Amplifiers
Amplifier Parts
Speaker Lids
1998-2013 Hub
Choosing a Cut-In Lid Kit
Check these first:
- That your lids are the factory lids the kit is designed for
- Whether you need speakers included or already have them
- Where the amplifier and wiring will run
Questions about fitment? Call us or request a custom build consultation.
Need Help Choosing 1998-2013 Harley Cut-In Lid Kits?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.