-
Beyma PRO6CXND - 6.5" Pro Coaxial Speaker (Single)
Vendor:BeymaBeyma PRO6CXND 6.5" Pro Coaxial Speaker (Sold in Singles) Nominal diameter 165 mm 6.5 inNominal impedance LF/HF 8/8 ohmPower capacity LF/HF 200/40 W AESProgram power LF/HF 400 / 80 wSensitivity LF/HF 95/104 2.83 @ 1 m @ 2πFrequency range 82-20000 Hz -
Beyma PRO6FX240ND - 6.5" Pro Carbon Fiber Coaxial Speaker (Single)
Vendor:BeymaBeyma PRO6FX240ND 6.5" Pro Carbon Fiber Coaxial Speaker (Sold in Singles) KEY FEATURES• High power handling: 400 / 80 W Program Power (LF / HF)• High Sensitivity: 94 / 103 dB (LF / HF)• Extended controlled displacement: Xmax 5,5 mm shorting copper pad for low harmonic distortion and linear impedance• Carbon Fiber cone with High-End quality sound CONEX spider for higher resistance and consistency• Common Neodymium magnetic system for low-weight and mounting depth• Excellent off-axis response 70° conical coverage for HF dispersion control• PM4 diaphragm for natural sound Specifications Nominal Basket Diameter 6.5" / 165mm Impedance 8 ohms Low Frequency AES Power Rating 200 Watts Low Frequency Program Power 400 Watts High Frequency AES Power Rating 40 Watts High Frequency Program Power 80 Watts Frequency Response 100Hz - 20kHz High Frequency Sensitivity (1W/1m) 103dB Low Frequency Sensitivity (1W/1m) 94dB LF Voice Coil Diameter 2" / 50.8mm HF Voice Coil Diameter 1.75" / 44.4mm Recom. Crossover Frequency 2.5kHz or higher @ 12dB/oct. Voice Coil Length 14 mm Air Gap Height 7 mm X Damage (peak to peak) 26 mm BL Factor 9.1 N/A Mounting Information Overall Diameter 6.9" / 174mm Bolt Circle Diameter 6.2" / 158mm Baffle Cutout Diameter 5.71" / 145.1mm No. Of Mounting Holes 4 Volume Displaced By Driver 0.02 ft3 / .55 Liters Overall Depth 4.0" / 103.1mm Net Weight 4.2 lb. / 1.9 kg. Shipping Weight 4.6 lb. / 2.1 kg. Materials Low Frequency Woofer Basket Die-Cast Aluminum Cone Carbon Fiber Surround Two Roll Treated Cloth Voice Coil Aluminum Spider Conex Magnet Neodymium High Frequency Tweeter Diaphragm PM-4 Voice Coil Edgewound Aluminum Ribbon Voice Coil Former Kapton Magnet Neodymium Thiele-Small Parameters Resonant Frequency (fs) 100 Hz Impedance (Re) 4.6 ohms Coil Inductance (Le) .24 mH Mechanical Q (Qms) 3.5 Electrical Factor (Qes) .56 Total Q (Qts) .48 Comp. Equivalent Vol. (Vas) .14 ft3 / 4 Liters Voice Coil Overhang (Xmax) 5.5 mm Diaphragm Mass (Mms) 15 Grams Surface Area of Cone (Sd)m2 0.0135m2 Reference Efficiency .83% Displacement Volume (Vd) 74 cm3 -
Beyma PRO8CXND - 8" Pro Coaxial Speaker (Single)
Vendor:BeymaBeyma PRO8CXND 8" Pro Coaxial Speaker (Sold in Singles) Nominal diameter 8 inNominal impedance 8 ohmPower capacity LF/HF 250/50 W AESProgram power LF/HF 500/100 wSensitivity 96-104 dB Frequency range 40-20000 Hz -
Beyma PRO8FX370ND - 8" High Power Pro Coaxial Speaker (Single)
Vendor:BeymaBeyma PRO8FX370ND 8" Pro High Power Coaxial Speaker (Sold in Singles) BEYMA PRO8FX370ND 8" COAXIAL SPEAKER HAS A STRONG CARBON FIBER CONE, NEODYMIUM MAGNET & 1.4" EXIT HF DRIVER BEYMA PRO8FX370ND COAXIAL SPEAKER INCLUDES A LIGHTWEIGHT NEODYMIUM 8" CAST FRAME SPEAKER & 1.4" EXIT HIGH-FREQUENCY COMPRESSION DRIVER FEATURES A WATERPROOF CARBON FIBER CONE & ONE NEODYMIUM MAGNET FOR BOTH LOW & HIGH FREQUENCY FOR PROPER TIME ALIGNMENT HANDLES 250 WATTS AES & 500 WATTS PROGRAM DEMODULATION RING FOR THE LOW FREQUENCY TO FLATTEN RESPONSE AND LOWER DISTORTION FOR ALL HIGH-QUALITY SOUND SINGLE POINT SOURCE APPLICATIONS INCLUDING HOUSE OF WORSHIP, STUDIO MONITORS, HOME THEATER SYSTEMS, MOVIE THEATERS, SMALL PA SYSTEMS, ETC. -
SaleCicada Audio CH65 6.5" Pro Coaxial Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio CH65 6.5" Pro Coaxial Horn Speaker Pair Cicada Audio CH65 6.5" Pro Coaxial Horn Speakers are built for Harley-Davidson baggers and high-output motorcycle audio systems that need real volume, strong projection, and cleaner sound at highway speed. The CH65 combines a powerful midbass driver with an integrated horn tweeter for loud vocals, crisp highs, aggressive open-air output, and the kind of efficiency needed for amplified Harley audio builds. Shop Cicada Audio 6.5" Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD High-Output 6.5" Cicada Speakers for Harley Audio Built for riders who want louder fairing speaker output, sharper vocals, stronger mids, and better projection from a 6.5" motorcycle speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CH65 6.5" Pro Coaxial Horn Speaker Pair Current Part Numbers CH652C = 2Ω version / CH654C = 4Ω version Speaker Size 6.5" Speaker Type Pro coaxial horn speaker Sold As Pair Best For Harley-Davidson bagger audio, fairing speaker upgrades, high-output motorcycle audio systems, and amplified 6.5" speaker locations System Goal Louder vocals, stronger mids, crisp highs, better projection, and cleaner highway-speed output Always verify impedance, amplifier power, speaker pod fitment, mounting depth, wiring, and tuning before ordering for your Harley-Davidson audio build. Built for Loud Harley-Davidson Bagger Audio The Cicada CH65 is a strong choice for riders upgrading factory Harley-Davidson audio systems with aftermarket amplifier power. These speakers are made for motorcycle audio builds where basic replacement speakers are not enough and the goal is more volume, stronger clarity, and real projection while the bike is moving. If you are building a louder fairing speaker setup, a pro-audio style motorcycle system, or a high-output Harley bagger audio upgrade, the CH65 gives you the efficiency and output needed to cut through wind noise, road noise, and helmet interference. Fitment Note On 2015+ Road Glide models, speaker pods may require modification for proper installation. Always verify pod clearance, mounting depth, speaker location, impedance, amplifier compatibility, and final system layout before ordering. Specifications Power Handling 500 watts RMS / 1000 watts max per pair Frequency Response 75Hz–20kHz +/-5dB Magnet Structure Neodymium high-energy lightweight N35 magnet Basket Heavy-duty die-cast aluminum basket Midbass Voice Coil 2.0" high-temp voice coil Tweeter Voice Coil 1.4" aluminum diaphragm high-temp voice coil Sensitivity 94dB / 99dB average 1W/1M, 2.83V Crossover 12dB crossover with custom-tooled vented crossover case Bi-Amp Capable Horn tweeters can be run on dedicated amplifier channels Heat Control Advanced voice coil heat sink design for improved heat dissipation Speaker Control Shorting ring design for improved speaker control Mounting Depth 3.0" / 76.2mm Mounting Diameter 5.7" / 145.5mm Treatment Weather treated for motorcycle audio use Sold Pair Best Use for the Cicada CH65 The Cicada CH65 is best used in Harley-Davidson motorcycle audio builds where the goal is louder fairing speaker output, stronger vocal projection, improved clarity, and more efficient performance from a 6.5" speaker location. Amplified System Recommended These are not basic replacement speakers. The CH65 is intended for amplified motorcycle audio systems where output, control, tuning, and projection matter. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation path. These related collections help match the CH65 with the right Harley audio upgrade direction. Shop Motorcycle 6.5" Pro Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuningSale -
SaleCicada Audio CH69W 6x9" Pro Coaxial Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio CH69W Pro Coaxial Horn Speaker 6x9" (2Ω and 4Ω) FEATURES: Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Removable threaded horn ring for easy modification Rain or Shine™ all-weather performance design Available in 4- or 2-Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient External 12dB crossover with optional -3/-6 tweeter attenuator 4-inch OFC copper wire tweeter voice coils offer great sound while generating less heat Water-resistant treated paper cone Lightweight / rigid Maximized efficiency / super strong Black Coat™ 2-inch high conductivity, low resistance OFC copper wire mid-bass voice coil ensures extreme temperature thermal performance N35SH Neodymium magnet Die-cast Aluminum custom tooled basket with Vortex Flow Venting™ Warranty: 2 years SPECIFICATIONS: 4Ω – 6X9-inch coaxial horn driver Power handling: 250W RMS/500W MAX Voice Coil: 2.5-inch/64mm Mid-bass & 1.4-inch/36mm Tweeter Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: water resistant treated paper cone Magnet: Neodymium Sensitivity: 95dB Frequency response 75Hz – 20kHz +/- 3dB Mounting Depth: 3.7-inch/93mm Mounting Diameter: 6.6-inch/155mm X 9.3-inch/226mmSale -
SaleCicada Audio CH8 8" Pro Coaxial Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio CH8 Pro Coaxial Horn Speaker 8" The new Cicada Audio CH8 speakers are a perfect solution for 2014 and later Harley baggers and other motorcycles. More output, lower frequency (NOT sub bass). Available in 4Ω or 2Ω …the 2Ω get more output with smaller higher efficiency / lower output amplifiers and don’t NEED a giant “current hog” for an amplifier to drive these. Specs: 500WRMS/1000 MAX Power Handling- PAIR Frequency Response: 75Hz -20Khz+/-5dB Neodymium High Energy/ Light Weight N35 Magnet structure Heavy Duty/ Die-cast Aluminum Basket 2.0” 2Ω or 4Ω – High Temp Voice Coil (Black Coat™) Voice Coil MidBass Shortening Ring for the Ultimate in speaker control 1.4” Aluminum Diaphragm High-Temp Voice Coil for Tweeter Advanced Voice Coil Heat Sink Design for Better Heat Dissipation High Sensitivity: > 99dB 1W/1M Average (1W/1M – 2.83V) 12dB Crossover with custom tooled/ Vented crossover case Can be Bi-Amped (Horn Tweeters can be run on their own dedicated channels) Total Diameter: 8.3” / 210.5mm Mounting Diameter: 7.1” / 180mm Mounting Depth: 3.6” / 91.2mm SOLD IN PAIRS Weather treated FITMENT APPLICATIONS: All Cicada Audio 8 inch and 6 X 9’s are “CUSTOM “ fitted. They do NOT drop in for an easy install (but neither does 95% of all 6 X 9’s and 100% of ALL 8 inch. These are ALL CUSTOM fitted. We recommend you find a really good motorcycle audio guy to do your install.Sale -
SaleCicada Audio CHX525 5.25" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCHX525.2 or .4Ω HIGH-PERFORMANCE PRO COAX HORN SPEAKERS New to our pro-line horn series, the CHX525.2 5.25″ coax horn speaker features a 1.5″, 2Ω, voice coil woofer and a 1.0″ horn, 8Ω, tweeter. It handles big power and is high-performance. 150w RMS / 300w MAX Power Handling each Heavy duty diecast basket 1.5″ high temp voice coil for mid-bass 1.0″ high temp voice coil for tweeter Freq Response: 90Hz – 20kHz +/- 5dB 91dB Sensitivity External 12dB / 6kHz tweeter crossover Mounting Depth: 2.26″ / 70mm Mounting Diameter: 5.25″ / 133mmSale -
Cicada Audio CHX65 6.5" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX65 6.5" Pro Coax Horn Speakers Cicada Audio CHX65 6.5" Pro Coax Horn Speakers are built for Harley-Davidson bagger audio systems that need loud, clean, all-weather motorcycle sound at highway speed. Designed for high-output motorcycle audio, the CHX65 combines a 6.5" pro coaxial driver, horn-loaded clarity, Carbon Matrix Composite cone construction, and strong projection for riders who want more output from their Harley audio system. Shop Cicada Audio 6.5" Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD All-Weather 6.5" Cicada Speakers for Harley Audio Built for riders who want loud vocals, sharper clarity, stronger projection, and real motorcycle audio performance from a 6.5" Harley speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CHX65 6.5" Pro Coax Horn Speakers Current Part Numbers CHX65.2 = 2Ω version / CHX65.4 = 4Ω version Speaker Size 6.5" Speaker Type Pro coaxial horn speaker Best For Harley-Davidson bagger audio, fairing speaker upgrades, high-output motorcycle audio systems, and amplified 6.5" speaker locations System Goal Louder vocals, stronger projection, clean open-air output, all-weather durability, and better highway-speed performance Sold As Pair Always verify impedance, speaker location, mounting depth, amplifier power, wiring, crossover setup, and final fitment before ordering for your Harley-Davidson audio build. Built for Harley-Davidson Bagger Audio The Cicada CHX65 is made for riders who want more than a basic replacement speaker. It is built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and custom bagger audio systems that need louder output, cleaner vocals, better clarity, and strong projection in real riding conditions. With a horn-loaded design, all-weather protection, high-efficiency output, and motorcycle-focused construction, the CHX65 is a strong fit for amplified Harley audio systems where the speaker needs to perform at speed, not just sound good in the garage. All-Weather Pro Coax Horn Design The CHX65 uses Cicada’s all-weather design with a Nanofram horn cover, Carbon Matrix Composite cone, neodymium magnet structure, aluminum tweeter diaphragm, and external crossover network. This makes it a strong speaker choice for Harley riders who want loud, clear, reliable motorcycle audio in real-world riding conditions. The included horn cover helps protect the compression driver, while the pro coaxial layout gives the speaker the projection and efficiency needed for open-air Harley audio builds. Specifications Speaker Size 6.5" pro coaxial horn driver Impedance Options CHX65.2 = 2Ω / CHX65.4 = 4Ω Power Handling 300 watts RMS / 600 watts max Frequency Response 70Hz–20kHz +/-4dB Sensitivity 92dB, 1W / 1M Midbass Voice Coil 2.0" / 51mm high-temperature voice coil Tweeter Voice Coil 1.4" / 35.56mm tweeter voice coil Cone Carbon Matrix Composite™ cone Tweeter Dome Aluminum tweeter diaphragm Magnet Neodymium magnet structure Crossover External 12dB custom-tooled, vented, encased crossover Tweeter Attenuation -3dB / -6dB heat-sink encased resistor pack Horn Cover Nanofram™ horn cover Weather Protection Exclusive Cicada all-weather design for rain protection, waterproofing, and UV protection Mounting Depth 2.64" / 67mm Mounting Diameter 5.67" / 144mm Best Use for the Cicada CHX65 The CHX65 is best used in Harley-Davidson bagger audio systems where the goal is loud 6.5" speaker output, strong vocal projection, clean highs, and better performance from fairing or custom speaker locations. Amplified System Recommended These speakers are intended for serious motorcycle audio systems. For best results, match the CHX65 with proper amplifier power, correct impedance selection, clean wiring, and a real tuning plan. Fitment and Installation Notes The Cicada CHX65 is designed for 2014+ Harley-Davidson factory-designed speaker locations, but every motorcycle audio build should be verified before ordering. Confirm speaker depth, mounting diameter, pod clearance, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, and custom bagger applications may require installation planning, speaker pod work, adapter rings, or system tuning depending on the exact bike and audio layout. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CHX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Pro Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CHX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build Consultation -
SaleCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair) All Weather 6x9 Pro Coaxial Driver A Weatherproof Horn Cover is included on the compression driver. SPECIFICATIONS: 4Ω – 6X9-inch PRO coaxial horn driver Power handling: 400W RMS/800W MAX each Voice Coil: 2.5-inch/64mm Mid-bass & 1.75-inch/44mm Tweeter High-temperature design Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 92dB, 1W / 1M response 46Hz – 20kHz +/- 3dB Mounting Depth: 3.75-inch/96mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Rain or Shine™ all-weather performance design Available in 4 or 2Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient 1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat External 12dB crossover with optional -3/-6 tweeter resistor attenuatorSale -
SaleCicada Audio CHX8 8" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX8 8" Pro Coaxial Horn Speaker Pair Cicada Audio CHX8 8" Pro Coaxial Horn Speakers are built for Harley-Davidson bagger audio systems that need serious output, strong projection, and clean all-weather motorcycle sound. Designed for high-output custom Harley audio builds, the CHX8 combines an 8" pro coaxial horn driver, Carbon Matrix Composite cone, neodymium motor structure, external crossover, and horn-loaded clarity for riders who want more authority from larger speaker locations. Shop Cicada Audio Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD High-Output 8" Cicada Speakers for Harley Audio Built for riders who need louder vocals, stronger projection, more speaker authority, and all-weather motorcycle audio performance from an 8" speaker platform. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CHX8 8" Pro Coaxial Horn Speaker Pair Speaker Size 8" Speaker Type Pro coaxial horn driver speaker Impedance Options 2Ω and 4Ω versions available depending on selected variant Best For Harley-Davidson bagger audio, custom speaker locations, larger fairing or pod upgrades, and high-output motorcycle audio systems System Goal Louder output, stronger projection, cleaner vocals, improved open-air sound, and all-weather Harley audio performance Sold As Pair Always verify impedance, mounting depth, mounting diameter, speaker pod clearance, amplifier power, crossover setup, wiring, and final fitment before ordering for your Harley-Davidson audio build. Built for High-Output Harley-Davidson Bagger Audio The Cicada CHX8 is designed for riders building serious Harley-Davidson motorcycle audio systems where a standard replacement speaker is not enough. With a larger 8" speaker platform, horn-loaded output, and all-weather construction, this speaker is built for custom bagger audio systems that need volume, clarity, and projection while the bike is moving. This speaker is a strong option for Harley audio builds using larger speaker locations, custom pods, advanced fairing setups, or full custom bagger systems where the goal is more authority and a stronger open-air listening experience. All-Weather Pro Coax Horn Design The CHX8 uses Cicada’s all-weather pro coaxial horn design with a weatherproof horn cover, Carbon Matrix Composite cone, neodymium magnet structure, aluminum tweeter diaphragm, and external crossover network. This construction supports strong output, clean projection, and reliable motorcycle audio performance in real riding conditions. The included Nanofram™ horn cover helps protect the compression driver, while the external 12dB crossover and optional tweeter attenuation help tune the speaker for different system goals. Specifications Speaker Size 8" pro coaxial horn driver Power Handling 400 watts RMS / 800 watts max each Frequency Response 46Hz–20kHz +/-3dB Sensitivity 92dB, 1W / 1M Midbass Voice Coil 2.5" / 64mm voice coil Tweeter Voice Coil 1.75" / 44mm OFC copper wire tweeter voice coil Tweeter Dome Aluminum tweeter diaphragm Cone Carbon Matrix Composite™ cone Magnet Neodymium magnet structure Crossover External 12dB custom-tooled, vented, encased crossover Tweeter Attenuation -3dB / -6dB heat-sink encased resistor crossover option Horn Cover Nanofram™ horn cover Weather Protection Rain or Shine™ all-weather performance design with protection for motorcycle audio use Mounting Depth 3.3" / 84mm Mounting Diameter 7.2" / 182mm Sold Pair Best Use for the Cicada CHX8 The CHX8 is best used in Harley-Davidson bagger audio builds where the goal is larger speaker output, stronger projection, more authority, and a louder open-air motorcycle audio system. Custom Fitment Required This is an 8" pro coaxial horn speaker. Always confirm the exact mounting location, pod depth, adapter requirements, grille clearance, amplifier power, and system layout before ordering. Fitment and Installation Notes The Cicada CHX8 is intended for serious motorcycle audio systems and custom Harley-Davidson bagger builds. Because this is an 8" speaker platform, fitment must be verified carefully before ordering. Confirm speaker depth, mounting diameter, pod clearance, grille clearance, wiring path, impedance, amplifier compatibility, and final system layout before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, Road King, and custom bagger applications may require custom pods, adapter rings, fabrication, or system planning depending on the exact bike and speaker location. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker size, amplifier power, DSP plan, wiring, and installation parts. These related collections help match the Cicada CHX8 with the right Harley audio upgrade path. Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop pro coaxial motorcycle speakers for Harley bagger audio Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CHX8 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker size, impedance, amplifier power, DSP, wiring, fabrication needs, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
DB Drive Euphoria XPERT EX6NCD 6.5″ 2-Way Loudspeaker
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. EX6NCD 6.5″ 2-Way Loudspeaker With Backloaded Compression Driver Early on, we have been committed to innovation in all things involving car audio. Experience the passion through audio designed and engineered for that moment you want to raise the bar and set the mood. Features 2″ (51mm) Midrange Voice Coil Neodymium Ring Magnet Assembly Rear Mounted Full Sized Compression Driver Die-Cast Aluminum Basket With Radial Venting 1.4″ (36mm) Polyester Tweeter Diaphragm Wide Dispersion Conical HF Waveguide 12dB Passive Crossover Included Protective Grills Included Heavy Gauge Stamped Steel Basket Sold in Pairs Modification to pods may be required Specifications Nominal Impedance 5.2Ω Power Handling 400 Watts Dynamic Wattage 800 Watts Freq Response 80hZ-20kHz Sensitivity (1w/1M) 105.7 DB Voice Coil Diameter 2"
-
Beyma PRO6CXND - 6.5" Pro Coaxial Speaker (Single)
Vendor:BeymaBeyma PRO6CXND 6.5" Pro Coaxial Speaker (Sold in Singles) Nominal diameter 165 mm 6.5 inNominal impedance LF/HF 8/8 ohmPower capacity LF/HF 200/40 W AESProgram power LF/HF 400 / 80 wSensitivity LF/HF 95/104 2.83 @ 1 m @ 2πFrequency range 82-20000 Hz -
Beyma PRO6FX240ND - 6.5" Pro Carbon Fiber Coaxial Speaker (Single)
Vendor:BeymaBeyma PRO6FX240ND 6.5" Pro Carbon Fiber Coaxial Speaker (Sold in Singles) KEY FEATURES• High power handling: 400 / 80 W Program Power (LF / HF)• High Sensitivity: 94 / 103 dB (LF / HF)• Extended controlled displacement: Xmax 5,5 mm shorting copper pad for low harmonic distortion and linear impedance• Carbon Fiber cone with High-End quality sound CONEX spider for higher resistance and consistency• Common Neodymium magnetic system for low-weight and mounting depth• Excellent off-axis response 70° conical coverage for HF dispersion control• PM4 diaphragm for natural sound Specifications Nominal Basket Diameter 6.5" / 165mm Impedance 8 ohms Low Frequency AES Power Rating 200 Watts Low Frequency Program Power 400 Watts High Frequency AES Power Rating 40 Watts High Frequency Program Power 80 Watts Frequency Response 100Hz - 20kHz High Frequency Sensitivity (1W/1m) 103dB Low Frequency Sensitivity (1W/1m) 94dB LF Voice Coil Diameter 2" / 50.8mm HF Voice Coil Diameter 1.75" / 44.4mm Recom. Crossover Frequency 2.5kHz or higher @ 12dB/oct. Voice Coil Length 14 mm Air Gap Height 7 mm X Damage (peak to peak) 26 mm BL Factor 9.1 N/A Mounting Information Overall Diameter 6.9" / 174mm Bolt Circle Diameter 6.2" / 158mm Baffle Cutout Diameter 5.71" / 145.1mm No. Of Mounting Holes 4 Volume Displaced By Driver 0.02 ft3 / .55 Liters Overall Depth 4.0" / 103.1mm Net Weight 4.2 lb. / 1.9 kg. Shipping Weight 4.6 lb. / 2.1 kg. Materials Low Frequency Woofer Basket Die-Cast Aluminum Cone Carbon Fiber Surround Two Roll Treated Cloth Voice Coil Aluminum Spider Conex Magnet Neodymium High Frequency Tweeter Diaphragm PM-4 Voice Coil Edgewound Aluminum Ribbon Voice Coil Former Kapton Magnet Neodymium Thiele-Small Parameters Resonant Frequency (fs) 100 Hz Impedance (Re) 4.6 ohms Coil Inductance (Le) .24 mH Mechanical Q (Qms) 3.5 Electrical Factor (Qes) .56 Total Q (Qts) .48 Comp. Equivalent Vol. (Vas) .14 ft3 / 4 Liters Voice Coil Overhang (Xmax) 5.5 mm Diaphragm Mass (Mms) 15 Grams Surface Area of Cone (Sd)m2 0.0135m2 Reference Efficiency .83% Displacement Volume (Vd) 74 cm3 -
Beyma PRO8CXND - 8" Pro Coaxial Speaker (Single)
Vendor:BeymaBeyma PRO8CXND 8" Pro Coaxial Speaker (Sold in Singles) Nominal diameter 8 inNominal impedance 8 ohmPower capacity LF/HF 250/50 W AESProgram power LF/HF 500/100 wSensitivity 96-104 dB Frequency range 40-20000 Hz -
Beyma PRO8FX370ND - 8" High Power Pro Coaxial Speaker (Single)
Vendor:BeymaBeyma PRO8FX370ND 8" Pro High Power Coaxial Speaker (Sold in Singles) BEYMA PRO8FX370ND 8" COAXIAL SPEAKER HAS A STRONG CARBON FIBER CONE, NEODYMIUM MAGNET & 1.4" EXIT HF DRIVER BEYMA PRO8FX370ND COAXIAL SPEAKER INCLUDES A LIGHTWEIGHT NEODYMIUM 8" CAST FRAME SPEAKER & 1.4" EXIT HIGH-FREQUENCY COMPRESSION DRIVER FEATURES A WATERPROOF CARBON FIBER CONE & ONE NEODYMIUM MAGNET FOR BOTH LOW & HIGH FREQUENCY FOR PROPER TIME ALIGNMENT HANDLES 250 WATTS AES & 500 WATTS PROGRAM DEMODULATION RING FOR THE LOW FREQUENCY TO FLATTEN RESPONSE AND LOWER DISTORTION FOR ALL HIGH-QUALITY SOUND SINGLE POINT SOURCE APPLICATIONS INCLUDING HOUSE OF WORSHIP, STUDIO MONITORS, HOME THEATER SYSTEMS, MOVIE THEATERS, SMALL PA SYSTEMS, ETC.
Unleash Professional Sound on Every Ride
Experience unmatched audio clarity and power with our selection of Motorcycle Pro Coaxial Speakers. Designed for serious riders who demand premium sound quality, these speakers deliver crisp, clear audio even at highway speeds. With advanced engineering and durable construction, your music will sound better than ever, no matter where the road takes you.
Optimized Audio for the Open Road
Our inventory of Pro Coaxial Speakers is specifically built for the unique demands of motorcycle audio systems. Whether you prefer heart-pounding bass or crystal-clear highs, these speakers provide the perfect balance for an immersive listening experience. Enjoy superior sound clarity, even against the roar of your engine or wind.
Rugged Durability to Handle the Elements
No need to worry about weather conditions or tough terrain. The Motorcycle Pro Coaxial Speakers we carry are built to last, with weatherproof designs that can handle rain, heat, and dust. Whether you're cruising through city streets or taking on cross-country trips, these speakers are made to withstand the rigors of the road, ensuring your audio setup stays intact.
Custom Fit for Your Ride
No need to worry about weather conditions or tough terrain. The Motorcycle Pro Coaxial Speakers we carry are built to last, with weatherproof designs that can handle rain, heat, and dust. Whether you're cruising through city streets or taking on cross-country trips, these speakers are made to withstand the rigors of the road, ensuring your audio setup stays intact.
High-Performance Audio, Minimal Space
With various sizes like 6.5", 8", and 10" available, our Pro Coaxial Speakers are designed to fit perfectly into your motorcycle’s audio system. From Harley-Davidson to Indian and more, we offer speakers that not only sound great but are tailored for an easy, hassle-free installation.
Upgrade Your Motorcycle Sound System at Garage Bagger Stereo
Take your audio experience to the next level with our Motorcycle Pro Coaxial Speakers. At Garage Bagger Stereo, we offer only the best products to help you build the ultimate sound system for your bike. Shop now to find the perfect speakers for your ride and enjoy unbeatable sound quality on every journey.