Browse Collections
-
Beyma Power 10IX - 10” Midrange Speakers
Vendor:BeymaLOW FREQUENCY SPEAKER 10 INCH Sold in Pairs Weather Treated Specifications Nominal Basket Diameter 10" / 250mm Impedance 8 ohms AES Power Rating 500 Watts Program Power 1,000 Watts Frequency Response 40Hz - 3.3kHz Sensitivity (1W/1m) 90dB Voice Coil Diameter 3" / 76.2mm Voice Coil Length 30 mm Air Gap Height 8 mm X Damage (peak to peak) 49 mm BL Factor 19 N/A Mounting Information Overall Diameter 10.3" / 261mm Bolt Circle Diameter 9.6" / 243.5mm Baffle Cutout Diameter- - Front Mount 9" / 228mm No. Of Mounting Holes 8 Overall Depth 5.2" / 133mm Net Weight 18.3 lb. / 6.8 kg. Shipping Weight 16 lb. / 7.25 kg. Materials Basket Die Cast Aluminum Cone Paper Surround Rubber Voice Coil Edgewound Copper Wire Magnet Ferrite Thiele-Small Parameters Resonant Frequency (fs) 41 Hz Impedance (Re) 6.8 ohms Coil Inductance (Le) 1.0 mH Mechanical Q (Qms) 8.1 Electrical Factor (Qes) .46 Total Q (Qts) .43 Comp. Equivelant Vol. (Vas) 1.15 ft3 / 32.5 Liters Voice Coil Overhang (Xmax) 13.0 mm Moving Mass (Mms) 95 Grams Surface Area of Cone (Sd)m2 0.038 Reference Efficiency .5% Displacement Volume (Vd) 505 cm3 -
Cicada Audio 10" Midbass Kit Complete - 98-current Harley Davidson
Vendor:Cicada AudioCicada Audio 10" Shallow Midbass Kit This kit is built around a dual 10" shallow Midbass setup and includes the Midbass, amplifier, sealed toppers, adapter rings, saddlebag braces, port kit, and quick-disconnect wiring needed for a professional saddlebag subwoofer installation. View Product Call 864-334-6131 Build Consultation THE REFERENCE STANDARD Complete Kit for 1998 to Current Harley Davidson Built for riders who want a complete bass upgrade without guessing which support parts are needed. Start a Build Consultation Call 864-334-6131 Key Specifications Product Name Cicada Audio 10" Midbass Kit Complete - 98-current Harley Davidson Type Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Electronics > Vehicle Audio > Vehicle Speakers Vendor Cicada Audio Fitment 1998-current Harley Davidson Configuration Dual 10" shallow Midbass setup Amplifier Included Cicada Audio FLX1600.1 Mono Amplifier Support Parts Included Sealed toppers, adapter rings, saddlebag braces, port kit, and quick-disconnect wiring Always verify saddlebag clearance, Midbass depth, adapter ring fitment, port placement, amplifier wiring load, and final enclosure layout before cutting or drilling. Cicada Audio 10" Shallow Midbass Kit Complete Kit for 1998 to Current Harley Davidson This kit is built around a dual 10" shallow Midbass setup and includes the Midbass, amplifier, sealed toppers, adapter rings, saddlebag braces, port kit, and quick-disconnect wiring needed for a professional saddlebag subwoofer installation. What’s Included (2) PRV Audio MT10SW1000-D4 10" Midbass — designed for strong bass output in tight saddlebag applications (1) Cicada Audio FLX1600.1 Mono Amplifier — Dedicated mono amplifier power for the subwoofers (1) Nagy’s Customs 10" Sealed Topper Pair — Helps seal and support the saddlebag subwoofer enclosure area (1) Nagy’s Customs 10" Harley Midbass/Subwoofer Adapter Rings Pair — Provides a clean mounting surface for 10" subwoofers or mid bass drivers (1) Nagy’s Customs Saddle Bag Braces — Reinforces the saddlebags for high-output audio builds (1) Cicada Audio Port Kit — Supports airflow and tuning for ported saddlebag bass applications year specific (2) DB Drive DBLHDH1 Quick-Disconnect Speaker Wire Harnesses — Makes bag removal and future service cleaner and easier Want us to build your bags for you give us a call 864-334-6131 Key Features Complete saddlebag bass kit designed for 1998-current Harley Davidson audio builds Dual 10" midbass setup for strong low-end output from the bags Includes amplifier, Midbass, mounting rings, sealed toppers, bracing, porting, and wiring Sealed toppers, adapter rings, and braces help improve bag support and enclosure strength Port kit helps support proper airflow and tuning for saddlebag bass Quick-disconnect wiring makes removing saddlebags easier during service or maintenance Built for riders who want a complete bass upgrade without guessing which support parts are needed This complete kit eliminates the guesswork and gives you a stronger foundation for a dual 10" Harley saddlebag bass system. Always verify saddlebag clearance, Midbass depth, adapter ring fitment, port placement, amplifier wiring load, and final enclosure layout before cutting or drilling. Need Help Deciding? Speak now to one of our sales consultants or support team. Call 864-334-6131 Start a Build Consultation -
SaleCicada Audio CMB10.S4 10" Pro Sound Midrange Speaker (Single)
Vendor:Cicada AudioCicada Audio CMB10.S4 Pro Sound MidBass Driver Features: 800WRMS/1600 MAX Power Handling Ferrite Magnet structure Heavy Duty / Die-cast Aluminum Basket 3.0” 4-Ohm / 6 Layer High Temp Voice Coil (Black Coat) Voice Coil Vented Voice Coil Gap for Maximum Heat dissipation Advanced Voice Coil Heat Sink Design for Better Heat Dissipation Frequency Response: 35Hz -1.75Khz+/-5dB High Sensitivity: 87.2dB (1W/1M ) Total Diameter: 10.24" / 260mm Mounting Depth: 4.31" / 109.5mm Mounting Diameter: 8.98" / 228mm SOLD INDIVIDUALLY The new Cicada Audio CMB10.S4 "MidBass" drivers are a great solution for Harley baggers and other motorcycles striving for the ultimate in midbass response. These are not an easy fit. These are designed for FULL custom builds. Fully custom installed utilizing Jefe or Nagy rings bag rings. These drivers represent the next wave of products from Cicada Audio. These drivers handle more power, are louder, play lower, with more authority, and sound better right out of the box than any other pro-audio-type speaker for Harley applications. We've built these speakers with the best materials we can use and keep sensitivity and sound quality as high as possible. With 3-inch/ 6 Layer 4-ohm voice coils on the MidBass driver and a "Trick" dust cap. We've built in extreme sensitivity for unreal output and High power/High heat dissipation. These are not for the squeamish, and they are not lightweight. These speakers are way beyond all the competition. TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian Chinese Simplified Hungarian Russian Chinese Traditional Indonesian Slovak Czech Italian Slovenian Danish Japanese Spanish Dutch Klingon Swedish English Korean Thai Estonian Latvian Turkish Finnish Lithuanian Ukrainian French Malay Urdu German Maltese Vietnamese Greek Norwegian Welsh Haitian Creole Persian TRANSLATE with COPY THE URL BELOW Back EMBED THE SNIPPET BELOW IN YOUR SITE Enable collaborative features and customize widget: Bing Webmaster Portal BackSale -
SaleCicada Audio CMB10.S4NEO 10" Pro Mid-Bass Driver w/ CMC™ & NEO Technology - 4Ω (Single)
Vendor:Cicada AudioCicada Audio® 10" CMB10.S4 Pro Mid-Bass Driver w/ CMC™ & NEO Technology Model: CMB10.S4NEO – For Harley-Davidson® & Motorcycle Audio Lightweight. Loud. Legendary. The Cicada Audio® CMB10.S4NEO is the ultimate 10-inch mid-bass driver engineered for Harley-Davidson® motorcycles and high-performance motorcycle audio systems. Featuring our cutting-edge Carbon Matrix Composite™ (CMC™) cone and ultra-efficient NEO motor technology, this speaker delivers powerful, distortion-free mid-bass while keeping weight minimal—perfect for riders who demand loud, clear sound at cruising speeds. Key Features: ✔ Motorcycle-Optimized – Designed specifically for Harley-Davidson® and custom motorcycle sound systems✔ NEO Motor Technology – High-output N42 neodymium magnetic structure for maximum efficiency with minimal weight✔ Carbon Matrix Composite™ (CMC™) Cone – Lightweight, ultra-rigid, and weather-resistant for crisp, powerful mid-bass✔ Rain or Shine™ All-Weather Performance – Built to withstand the elements✔ Proprietary Cicada Audio® “A” Basket Design – Die-cast aluminum with Vortex Flow Venting™ for superior heat dissipation and structural integrity✔ Black Coat™ OFC Copper Voice Coil – Ensures high conductivity, low resistance, and extreme thermal performance✔ Engineered in the U.S.A. – Designed by American audio experts for premium sound✔ Two-Year Warranty – Confidence in quality and durability Specifications: Power Handling: 500W RMS / 1000W MAX Voice Coil: 3-inch / 4Ω / 6-layer OFC Copper with Black Coat™ Magnet: N42 Neodymium Slug Basket: Heavy-duty die-cast aluminum with Vortex Flow Venting™ Cooling: Vented voice coil gap + advanced heat sink design for maximum heat dissipation Frequency Response: 35 Hz – 3 kHz ±5 dB Sensitivity: 90 dB (1W/1M) Total Diameter: 10.24” / 260 mm Mounting Depth: 4.5” / 115 mm Mounting Diameter: 8.98” / 228 mm Recommended Amplifiers: Pair the CMB10.S4NEO with one of these high-performance Cicada Audio® amplifiers for optimal results: BDA1600.1 – Mono Block Amplifier FLX1400.4 – 4-Channel Pro Amplifier (350W x 4) FLX1600.1 – Mono Subwoofer Amplifier (1600W) These amplifiers are a perfect match for the CMB10.S4NEO, delivering the clean, powerful output needed to make your 10s truly shine—whether you’re cruising the highway or parked at the show. TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian Chinese Simplified Hungarian Russian Chinese Traditional Indonesian Slovak Czech Italian Slovenian Danish Japanese Spanish Dutch Klingon Swedish English Korean Thai Estonian Latvian Turkish Finnish Lithuanian Ukrainian French Malay Urdu German Maltese Vietnamese Greek Norwegian Welsh Haitian Creole Persian TRANSLATE with COPY THE URL BELOW Back EMBED THE SNIPPET BELOW IN YOUR SITE Enable collaborative features and customize widget: Bing Webmaster Portal BackSale -
DB Drive XPERT EXM10N 10" NEO Midrange
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. Xpert EXM10N 10" NEO Midrange Experience the Power of Precision with XPERT NEO Midrange! Introducing the XPERT NEO MID-RANGE EXM10N, where precision meets power in a 10” structure that redefines your audio experience. Features 2.5″ (63.5mm) Voice Coil Neodymium 10 Piece Radially Equalized Magnet Assembly IP52 Rated Paper Cone With Treated Cloth Surround Die-Cast Aluminum Basket With Radial Venting Specs Resonant Frequency (fs) 71.7Hz D.C. Voice Coil Resistance 3.2Ω Nominal Impedence 4Ω Power Handling 400 Watts Dynamic Wattage 800 Watts Sensitivity (1w/1m) 102.1 dB Voice Coil Diameter 2.5" (63.5mm) Need rings to install get them here! -
DB Drive XPERT EXM10SN 10" Midrange - Stamped Frame
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. Xpert EXM10SN 10" Midrange - Stamped Frame Experience the Power of Precision with XPERT NEO Midrange! Introducing the XPERT NEO MID-RANGE EXM10SN, where precision meets power in a 10” structure that redefines your audio experience. Features 2.5″ (63.5mm) Voice Coil Neodymium 12 Piece Radially Equalized Magnet Assembly IP52 Rated Paper Cone With Treated Cloth Surround Heavy Gauge Stamped Steel Basket Specs Resonant Frequency (fs) 49.4Hz D.C. Voice Coil Resistance 3.2Ω Nominal Impedence 4Ω Power Handling 400 Watts Dynamic Wattage 800 Watts Sensitivity (1w/1m) 101.8 dB Voice Coil Diameter 2.0" (51mm) Need rings to install get them here! -
SaleDiamond Audio MSMB102NEO 10" Midbass
Vendor:Diamond Audio10" High Power Midbass Neodymium Driver Water Resistant in 2Ω or 4Ω Features: Speaker Size 10" Impedance 2Ω or 4Ω RMS Power Rating 400w Max Power Rating 800w Freq Range 55Hz-4.5KHz Sensitivity (1W/1Mm) 96dB Water-resistant Sold in Pairs Diamond Audio’s new state-of-the-art 10" high-power midbass 2Ω or 4Ω neodymium driver, MSMB102NEO, sets a new benchmark for motorsports midbass driver. It boasts a cast basket, water-resistant carbon fiber cone, exceptional power handling, a wide frequency response ranging from 55Hz to 4.5KHz, and is available in 2 Ohm. With an output sensitivity of over 95dB, the MSMB102NEOs allow for a loud performance with minimal power. However, should you desire to push them to their limits, their high power handling. For those seeking tremendous volume and crystal-clear clarity, the Diamond Audio MSMB10NEO drivers are a must-have in your next motorcycle or mobile audio installation! See the MSMB104NEO for a 4Ω version.Sale -
DS18 PRO-RY10.4NMB - 10" Pro Ryder Neo Water Resistant Mid-Bass Woofer (Single)
Vendor:DS18 Motorcycle AudioDS18 PRO-RY10.4NMB PRO RYDER 10" Carbon Fiber Neodymium Water Resistant Mid-Bass Woofer 450 Watts Rms 4-Ohm (Sold in Singles) 10" Mid-Bass Woofer Water Resistant Carbon Fiber Cone MAX Power: 900 Watts RMS Power: 450 Watts Impedance: 4-Ohm 3" SVC Neodymium Magnet ~ 89dB TECHNICAL DATA SPECS SKU PRO-RY10.4NMBNominal Diameter 10" / 254 mmNominal Impedance 4 OHMSRMS Power Handing 450 WattsMaximum Power Handing 900 WattsSensitivity (1w/1m) 89 dBFrequency Response 30Hz-6.3KHzRecommended Hi Pass Crossover 300 Hz SPECS Voice Coil Diameter 3" / 76.5 mmVoice Coil Former Material TilWinding Material CCAWBasket Material AluminumMagnet Weight 14.8 Oz THIELE & SMALL PARAMETERS Vas 16.7 L / 0.59 ft3Fs 47.7 HzQms 6.4Qes 0.93Qts 0.81Re 3.51 OHMS MEASUREMENTS Overall Diameter 10.2" / 260 mmFront Mount Baffle Cutout 9.3" / 237 mmMounting Depth 5" / 129 mmOverall Depth 5.6" / 143 mmProduct Weight 12.5 lbsProduct Dimensions 11.25 x 11.25 x 7.25 DS18 PRO-RY10.4NMB 10” Mid-Bass Carbon Fiber Water Resistant Neodymium Woofer 900W MAX 4-Ohm Take your motorcycle rides to a whole new level with DS18’s PRO-RY10.4NMB! This 10" Carbon Fiber Water Resistant Woofer is designed to deliver an intense kick that will make every beat pulsate through your bike. The PRO-RY10.4NMB’s cutting-edge neodymium motor promotes higher sensitivity and extreme power handling. Whether you're a casual listener, an avid audiophile, or a fierce competitor, the PRO-RY10.4NMB will deliver professional-grade sound reproduction that will blow you away. Its unparalleled power rating of 450W RMS and a staggering 900W MAX power give the PRO-RY10.4NMB the ability to deliver raw vocal power like no other. Experience mid-bass perfection with the PRO-RY8.4NMB, these speakers reproduce frequencies ranging from as high as 6.3KHz to as low as 30Hz. No matter what genre or style you prefer, this speaker will bring out the best in your music during every session. Equipped with a temperature-tested 3" CCAW Voice Coil, the PRO-RY10.4NMB dares you to play your music whenever you want and for as long as you desire. No need to worry about overheating or performance degradation. This speaker is built to handle your passion for music without skipping a beat. We understand that durability is a priority, especially when it comes to your motorcycle. That's why the PRO-RY10.4NMB features a cone made from a robust carbon fiber and resin mix, reinforced by rubber surrounds. This construction not only enhances its resistance to environmental damage but also ensures longevity. Rain or shine, this speaker will withstand the elements and continue to deliver impeccable sound quality. Get LOUD and stay there by ordering your DS18 PRO-RY10.4NMB today. -
SaleGround Zero GZCK 250XSPL 10" Midrange Speakers
Vendor:Ground ZeroGround Zero GZCK 250XSPL 10" Driver Low Freq 400 Watts max 250 mm / 10″ high efficient SPL midwoofer with stiff reinforced paper cone and long stroke CCAW voice coil, incl. grill 10″ SPL midwoofer 50 mm / 2″ CCA voice coil Fiber reinforced paper cone Long stroke foam surround Resonance free steel basket Paper dust cap Soldering terminal 1 piece / package Sold in singles Additional Info Model SPL Midwoofer Diameter 9.84" Power Handling 400 Impedance 4Ω Freq Response 40Hz-6KHz Voice Coil 2" CCA Mounting 9.25" Mounting Depth 4.33" Resonance Freq (FS) 44Hz Efficiency 93 DBSale -
SaleGround Zero GZCW 10PROC 10" Competition Pro Carbon Midwoofer
Vendor:Ground ZeroGROUND ZERO COMPETITION PRO Ground Zero GZCW 10PROC 10" Competition Pro Carbon Midwoofer The Ground Zero GZCW 10PROC is a 10 inch high-power carbon midwoofer designed for serious output, strong midbass impact, and competition-style audio builds. It features a carbon cone, W-shape long-stroke surround, Ground Zero aluminum cast housing, 3 inch copper voice coil, and compact screw terminals for high-performance custom installations. View Specs Need Help? 10" Carbon Midwoofer for Serious Output 10 inch high-power SPL midwoofer 500W RMS / 1000W max power handling 4Ω impedance Carbon cone and carbon dust cap 75 mm / 3 inch copper voice coil W-shape long-stroke surround Ground Zero aluminum cast housing Ground Zero GZCW 10PROC Midwoofer Overview The Ground Zero GZCW 10PROC is built for systems that need more than a basic speaker upgrade. This 10 inch Competition Pro carbon midwoofer is designed for powerful midbass, strong low-frequency output, and high-performance custom audio systems where output and control matter. With 500W RMS power handling, a 3 inch copper voice coil, carbon fiber cone construction, and a Klippel optimized design, the GZCW 10PROC is a serious choice for competition-style motorcycle audio, Harley bagger builds, saddlebag speaker locations, custom enclosures, and high-output systems. Key Features 10" High-Power Midwoofer Designed for strong midbass, low-frequency output, and high-output custom audio systems. 500W RMS Power Handling Handles 500W RMS and 1000W max power for demanding speaker and midbass applications. Klippel Optimized Design Klippel optimized construction helps improve mechanical and acoustic performance. Carbon Cone The carbon cone and carbon dust cap create a rigid, controlled diaphragm for strong output. Long-Stroke Surround The W-shape long-stroke surround supports increased excursion control for high-performance use. 3" Copper Voice Coil The 75 mm / 3 inch copper voice coil supports thermal handling and serious output. Specifications Speaker Model Ground Zero GZCW 10PROC Speaker Type High-power SPL midwoofer Diameter 25 cm / 10" Power Handling 500W RMS / 1000W max Impedance 4 ohms Efficiency 90 dB Frequency Response 30 Hz – 2400 Hz Voice Coil 75 mm / 3" copper Cone Carbon fiber Dust Cap Carbon Surround W-shape long-stroke surround Frame Ground Zero aluminum cast housing Terminals Compact screw terminals Mounting Diameter 227 mm / 8.94" Mounting Depth 122 mm / 4.80" Fs 30 Hz Qts 0.22 Vas 53 L / 1.87 cu. ft. Best For High-output Harley-Davidson bagger audio builds 10 inch saddlebag speaker and midbass applications Competition-style motorcycle audio systems Custom enclosures and performance speaker locations Systems needing strong midbass impact and low-frequency output Ground Zero motorcycle audio and custom car audio builds Important Installation Notes Professional installation is recommended. Always verify enclosure layout, cutout diameter, mounting depth, amplifier load, wiring, and crossover settings before final installation. Confirm 4Ω amplifier compatibility before wiring. Verify mounting depth and cutout before cutting or modifying panels. Use proper crossover settings for the speaker location and system design. Use the correct amplifier power and wiring for a 500W RMS midwoofer. Custom motorcycle and saddlebag applications may require fabrication. Garage Bagger Stereo Advantage Speaker matching for Harley-Davidson and custom bagger audio systems Amplifier pairing and crossover guidance for high-output builds Support for saddlebag speaker, midbass, and competition-style audio layouts Real motorcycle audio experience from Garage Bagger Stereo Related Motorcycle Audio Categories 10 Inch Speakers 10 Inch Midrange Motorcycle Speakers 10 Inch Pro Coaxial Motorcycle Speakers 10 Inch Motorcycle Subwoofers Amplifiers and Power Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle Batteries Install Support Motorcycle Speaker Installation Parts Motorcycle Speaker Lids Motorcycle Audio Installation in Taylors, SC Ground Zero GZCW 10PROC FAQ Is the Ground Zero GZCW 10PROC a subwoofer or midwoofer? The GZCW 10PROC is a high-power SPL midwoofer designed for strong midbass and low-frequency output. What size is the GZCW 10PROC? It is a 25 cm / 10 inch midwoofer. How much power does this speaker handle? The GZCW 10PROC is rated at 500W RMS and 1000W max power handling. What impedance is this speaker? This speaker is rated at 4 ohms. Is professional installation recommended? Yes. Professional installation is recommended because enclosure layout, cutout, mounting depth, amplifier power, wiring, and crossover settings all need to be verified before final installation. Need Help Matching This Midwoofer? Call Garage Bagger Stereo before ordering if you need help matching the Ground Zero GZCW 10PROC with the right amplifier, enclosure, wiring, and motorcycle audio system design. Call 864-334-6131 Ask GBS for HelpSale -
SaleGround Zero GZCW 10SPL 10" High-Power mid-woofer
Vendor:Ground ZeroGround Zero GZCW 10SPL High-Power mid-woofer 1000 Watts max Description 10″ mid-woofer Klippel® optimized Non-pressed paper cone W-shape long stroke surround GZ-design aluminum cast housing 75 mm / 3″ copper voice coil Reinforced paper dust cap Compact screw terminals One piece/package Additional Info High-Power SPL mid-woofer Diameter 25 cm / 10″ Power Handling 500 / 1000 Watts Impedance 4Ω Freq Response 30 Hz – 2400 Hz (F-3 in the recommended enclosure) Voice Coil 75 mm / 3″ Copper Mounting 8.94″ Mounting Depth 4.80" Resonance Freq (FS) 33Hz Efficiency 91 DB Equiv. Air volume (Vas) 50 L / 1.77 cu.ft. Owner's ManualSale -
SalePRV Audio MT10W1200-NDY-4 10" PRO Midrange Speakers
Vendor:PRV AudioPRV Audio MT10W1200-NDY-4 All Weather 10" PRO Audio Low Frequency Woofer (Sold in Singles) Highlights Optimized for use in compact enclosures, this mid is ideal for motorcycle saddlebags 1,200 watts RMS power makes high acoustical output Rubber Surround allows a generous 1.65″ peak-to-peak excursion Powerful neodymium magnet structure features distortion-canceling fixtures Fast transient response, deep low tones, and dynamic mid-bass Weather-resistant paper cone and dust cap with true PRO audio midbass performance Specification Nominal Impedance: 4Ω Rated Power Handling: 600 Watts Program Power: 1200 Watts Sensitivity (1W/1m): 97 dB Recommended HP Xover 65Hz at 12DB Frequency Range 40 - 4000 Hz Voice Coil 3" Xmax 6.5mm Vas 41.24l (1.46 ft3) Sold in Single Weatherproof Data SheetSale
