
-
Description
-
Reviews
DB Drive Xpert EX10NMB-CFXLV2
The DB Drive XPERT EX10NMB-CFXLV2 is a limited edition 10" carbon fiber midbass with a 3" voice coil and neodymium M-ring magnet, optimized for high-output SQ sound systems. It is rated 800W (1600W dynamic) at 3Ω with 93dB sensitivity. Adapter rings are needed to install, and it needs 4.64" of mounting depth.
10" Carbon Fiber Neodymium Midbass
A weather-resistant carbon fiber cone on a die-cast aluminum basket with radial venting, driven by a 3" voice coil and N52 neodymium magnet.
- 800W power handling, 1600W dynamic
- 3Ω impedance, 93dB sensitivity (1W/1m)
- 10.85" diameter, 9.25" cutout, 4.64" depth
Key Product Details
| Product | DB Drive XPERT EX10NMB-CFXLV2 Limited Edition Carbon Fiber 10" Midbass |
| Speaker Type | 10" midbass, optimized for high-output SQ sound systems |
| Voice Coil | 3" (63.5mm) |
| Magnet | Neodymium M-ring magnet assembly (single-ring N52 neodymium) |
| Cone and Surround | Weather-resistant carbon fiber cone with rubber surround |
| Basket | Die-cast aluminum with radial venting |
| Terminals | Compression speaker terminals |
| Mounting Depth | 4.64" (117.75mm) |
Always confirm your lid or bag opening, ring selection and the 4.64" depth, and confirm your amplifier is stable at 3Ω, before ordering.
A 10-Inch Neodymium Midbass for High-Output Systems
The EX10NMB-CFXLV2 uses a carbon fiber cone with a rubber surround, a 3" voice coil and a redesigned single-ring N52 neodymium magnet. DB Drive says its extended-bandwidth motor makes it a good match for higher-frequency drivers such as midranges and tweeters.
Its 3Ω impedance, 800W power rating and 1600W dynamic rating are the numbers to match against your amplifier channel. The cone is described as weather resistant; DB Drive does not publish a waterproof rating.
Specifications
| Power Handling | 800W |
| Dynamic Wattage | 1600W |
| Impedance | 3Ω |
| DC Voice Coil Resistance (Re) | 3Ω |
| Sensitivity (1W/1m) | 93dB |
| Resonant Frequency (Fs) | 78.70Hz |
| Mechanical Q (Qms) | 4.04 |
| Electrical Q (Qes) | 0.96 |
| Total Q (Qts) | 0.77 |
| Equivalent Compliance Volume (Vas) | 12.06L |
| Mechanical Compliance (Cms) | 70.46mm/N |
| Overall Diameter | 10.85" (275.50mm) |
| Cutout Diameter | 9.25" (234.88mm) |
| Mounting Depth | 4.64" (117.75mm) |
Specifications are from the DB Drive product page.
Planning a 10-Inch Midbass Install
Confirm the opening: the speaker has a 9.25" cutout, a 10.85" overall diameter and needs 4.64" of depth behind the mounting surface. 10-inch speakers always need mounting rings. Browse the Nagy's Customs adapter rings, including the Nagy's Customs 10" 98-23 Harley subwoofer and midbass adapter rings and the Nagy's Customs Monster Mega 10" 98-23 adapter rings, or all motorcycle speaker adapters, and check the ring opening against the cutout above.
Choose an amplifier channel that is stable at 3Ω and can supply the power you want within the 800W rating, and set the crossover and gains with an amplifier or motorcycle DSP. With a 78.70Hz resonant frequency, this driver is a midbass, so plan a subwoofer if you want deep low end.
Related Paths
DB Drive EX10NMB-CFXLV2 FAQ
How much power does the EX10NMB-CFXLV2 handle?
DB Drive rates it at 800W power handling with 1600W dynamic wattage.
What impedance is it and what amplifier does it need?
It is a 3Ω speaker with a 3Ω DC voice coil resistance. Use an amplifier channel that is stable at 3Ω and can supply the power you want within the 800W rating.
What are the cutout and mounting depth?
Overall diameter is 10.85" (275.50mm), the cutout is 9.25" (234.88mm) and the mounting depth is 4.64" (117.75mm). Confirm the 4.64" depth fits your lid or bag.
Do I need adapter rings to install it?
Yes. 10-inch speakers always need mounting rings. Match the ring to your lid or bag opening and to the 9.25" cutout, or ask us to confirm the right rings for your bike.
Is it weather resistant?
The cone is weather-resistant carbon fiber with a rubber surround. DB Drive does not publish a waterproof rating for it.
What are its Thiele/Small parameters?
Resonant frequency (Fs) is 78.70Hz, Qms 4.04, Qes 0.96, Qts 0.77, Vas 12.06L and Cms 70.46mm/N, with 93dB sensitivity at 1W/1m.
Does Garage Bagger Stereo install it?
Garage Bagger Stereo offers motorcycle audio installation at our Taylors, SC shop and can help you plan a DIY install. Call 864-334-6131 to check scheduling.
Need Help Choosing?
Tell us your bike, year and where the midbass will mount, and we will confirm rings, depth and amplifier match before you order.
