1998-2013 Harley Saddlebag Rings & Toppers
Nagy's Customs saddlebag adapter rings and bag seals for 1998-2023 Harley-Davidson, in 8-inch and 10-inch sizes, including rings for JL TW-3 and Kicker Solo-Baric subwoofers, plus a PRV Audio shallow subwoofer kit. Match ring size to your speaker or subwoofer.
THE REFERENCE STANDARD
Build It Right the First Time
Not sure which parts fit your exact bike and setup? Start with a clean, correct plan.
- Fitment confirmed for your exact bike and year
- Parts matched to your speakers and amplifier
- Build help from a GBS specialist
Browse Collections
-
SaleNagy's Customs 10" 98-23 Harley Subwoofer Midbass Adapter Rings (Pair)
Vendor:Nagys CustomsALL NEW INJECTION MOLDED 10″ for Harley Davidson Saddlebags SUBWOOFER ADAPTER RINGS/WITH PANEL BOND SOLD IN PAIRS, SPEAKER AND RING MOUNTING HARDWARE INCLUDED! 10” SUB ADAPTER 98-23 Kit includes: 90-minute panel bond 32 screws, 16 to hold the speaker to the bag, and 16 to hold the speaker to the Adapter. 1/8″ Drill Bit 2 Braces (purchase more bracing here) Instructions Panel bond gun available as an add-on There are 3 options here you can get just the rings on option 1 These are an Injection molded 10” wheel side mount adapter with an 11.2” OD, 9” ID 5", and a ½” mounting surface tilt to follow the flow more of the outside of the saddle bag to allow a more profound speaker to be mounted with enough room for proper ventilation. Max mounting depth will vary by bag manufacturer. Fitment will also vary by bag manufacturer. Using a Quality bag or stock bag will achieve the best results. The inside diameter may have to be opened slightly as different speaker manufacturers are on the market. In this Kit, you will receive a tube of 220ml 90min NG90 panel bond, and mounting hardware. Applicator sold separately. If you choose the inserts, those can be purchased separately.Sale -
Nagy's Customs Monster Mega 10″ 98-23 HD Subwoofer or Midbass Adapter Rings (Pair)
Vendor:Nagys CustomsNagy's Customs Monster Mega 10" 1998-2023 HD Subwoofer or Midbass Adapter Rings 10" Subwoofer Adapter Rings These are the new Subwoofer and midbass adapters(Patent Pending) for the New Midbass and Subwoofers. They are an oversized Adapter ring to sit at the shock bump in a 1998-2023 Harley Davidson. The OD is 11.02 with a mounting diameter of 9.40. No more having to remove the gaskets from the subwoofer to get them to fit or trim down the speaker itself!!!. These will fit any Subwoofer or midbass with a bolt pattern larger than 9.4. They can also be opened up to accommodate the JLTW3, and you can clock the speaker in any position. They are also designed to work with the Nagy toppers with a little bit of trimming. THEY WILL NOT FIT A 9" B" SKET SUBWOOFER OR MIDBASS, AND YOU WOULD NEED A REDUCER RING, WHICH WE ALSO CARRY. If you need to run anything smaller than a 9.3 mounting diameter, you would need to purchase the regular ones on the website. Sold in pairs Custom-Made Parts: all sales are Final. Sold in pairs -
Nagy's Customs 10" 98-13 Harley Davidson Bag Seals (Pair)
Vendor:Nagys CustomsNagy's Customs 10 inch bag seals (toppers) for 1998 to 2013 Harley-Davidson saddlebags close off the top of the bag so 10 inch Nagy's adapter rings can run as sealed enclosures.Key Specs Fiberglass bag seals made from a CNC mold of a stock Harley saddlebag Notched for the Nagy's adapter ring Self-adhesive carpet included to finish the inside and outside Bond in with panel bond or 2-part epoxy, or fiberglass in Manufacturer: Nagy's Customs Fitment and Installation NotesTrimming and small gap filling may be needed, since saddlebags are not all made exactly alike. Depending on subwoofer magnet size, some modification at the top may be required.Pair with a driver from our motorcycle subwoofers collection, or ask about a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Nagy's Customs 8" Subwoofer/Midbass Adapter Rings 98-23 (Front or Rear) (Pair)
Vendor:Nagys Customs8" Sub Mount 14-23 ( Front or Rear) Don't forget to add some Grillz, to protect your speakers!! Sold in pairs Front Mount Adapter Rings Front CNC molded sub mount adapter , OD 8.625 mounting 7.125 Set back ½” Slight variances of 1-3%. I took all the guess work out of it for you! These sit up front and allow either a midbass or a sub to be mounted. In them. These will also pair up with the rear set! 2 wasn’t enough and want to add 2 more. No worries! The 2 piece match up and it takes the guess work out of having to redo your saddle bags. Just add the rear and your sitting at quads! Fitment will also vary by bag manufacture. Using a Quality bag or stock bag will achieve the best results. Rear Mount Adapter Rings Rear CNC molded sub-mount adapter, OD 8.625 mounting 7.125, Set back ½”. Slight variances of 1-3%. I took all the guesswork out of it for you! These sit up front and allow either a midbass or a sub to be mounted. These will also pair up with the front set! 2 weren’t enough, and I want to add 2 more. No worries! The 2 pieces match up, and it takes the guesswork out of redoing your saddle bags. Just add the fronts, and you're sitting at quads!Fitment will also vary by bag manufacturer. Using a Quality bag or stock bag will achieve the best results. MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag. **due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results. Custom Made Parts, all sales are Final Sold in pairs -
Nagy's Customs Harley Davidson 98-23 10/8 Adapter (pairs)
Vendor:Nagys CustomsThe Nagy's Customs Harley-Davidson 98-23 10/8 Adapter (pair) is one ring that fits all bags, with a 10" and 8" opening, made from CAD of a stock bag and CNC machined.Key Specs Sold in pairs; toppers sold separately One ring fits all bags Run a baffle 8" in the rear, a sealed-back 8" or a compression driver Matching year topper fits with little modification by cutting back from the rear 10" notch Fitment and Installation NotesListed for 1998-2023 Harley-Davidson saddlebags.Browse more: Nagy's Customs adapter rings and midrange speakers, or get a custom build planned around your bike.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Nagy's Customs 98-23 Harley Davidson Removable Bag Seals
Vendor:Nagys CustomsNagy's Customs 1998-2023 H-D Removable Bag Seals Current Lead Time 2-3 weeks The new REMOVABLE bag seals/toppers allow you to seal your bags and still have access, if needed, to the storage space! Works on all bags 1998-2023, some aftermarket bags may require additional trimming. They work with Nagy's Customs Speaker Adapters ONLY. They are not designed to work with any other Speaker Adapters on the market today. They will come preassembled. ( inserts installed and tops attached to the frame) I would leave it preassembled for trimming. That way, you're trimming both the shelf ring and closeout together to fit the bag. These are CAD and CNC from a stock bag. So using a stock or aftermarket quality bag will always achieve the best results. Panel bond the shelf ring in, notch out for the speaker ring The CNC half-moon piece will need to be panel bonded to the speaker ring. It’s important to make sure all touching areas are prepped so everything bonds together. It will also come with carpet to give it a nice finish look ( carpet to be put on by customer ) Built off stock bags some aftermarket bags may require additional modification or fill-in Rings not included Toppers only 5-10 business day lead time DOES NOT INCLUDE RINGS!! Order rings here -
PRV Audio 10" Shallow Subwoofer Kit Complete - 1998-Present Harley Davidson
Vendor:PRV AudioThis PRV Audio 10" Shallow Subwoofer Kit is a complete dual-subwoofer package for saddlebag installs on 1998-Present Harley-Davidson Touring models. It bundles the amplifier and the support parts needed for the install.Key Specs Subwoofers: (2) PRV Audio MT10SW1000-D4 10" shallow Amplifier: PRV Audio MDX1800.1 mono Nagy's Customs 10" adapter rings, sealed topper pair and saddlebag braces Cicada Audio 3" port kit Two DB Drive DBLHDH1 quick-disconnect speaker wire harnesses Fitment and Installation NotesOn 2024-present bikes the adapter rings have to be opened up more for this speaker. Verify saddlebag clearance, subwoofer depth and port placement before cutting.Related: Motorcycle Subwoofers and Nagy's Customs Adapter Rings. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Nagy's Customs 8″ Harley Quad Outside Mount 98-23
Vendor:Nagys CustomsQuad 8" Outside Mount 1998-2023 Don't forget to add some Grillz, to protect your speakers!! Sold in pairs CNC molded. So that 1 8” speaker just doesn’t do it. We can pair the fronts and the rears to make a quad set! (2 8” speakers in each bag, designed to be symmetrical when installed.) Fitment will also vary by bag manufacturer. Using a Quality bag or stock bag will achieve the best results. CLOSEOUTS FOR SEALING THE BAGS ARE NOT INCLUDED, CHOOSE WHEN CHECKING OUT BELOW. MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF-TAPPING SCREWS It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of bodywork as you will be cutting the saddle bag. **Due to many variations of saddle bags, these were CNC-using stock bags. Depending on the bag, slight modifications may have to be done to the adapter. I.e., sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results. Custom Made Parts, all sales are Final Sold in pairs -
Nagy's Customs 8" 98-23 Kicker Solo-Baric Adapter Rings (Pair)
Vendor:Nagys CustomsNagy's Customs 8" Kicker Solo-Baric Adapter Ring Kit Get that Square bass in your bags!! Fits 1998-2023 Square Matters Upgrade your bike's audio system from factory speakers with these 8 inch speaker adapter rings. The Solo-Baric L7S's square sub design delivers dependable bass - even when pushed to the limit. Dual voice coils with high-temp copper windings easily handle intense heat and power levels for clean, clear bass anytime. Be sure and seal the bags with the "Closeout Kit" below. **Closeouts for sealing the bags not included, choose when checking out below. These mounting brackets are a CNC molded 10” wheel side mount speaker adapter with a 10.7” OD, 9” ID 5°, and a ½” mounting surface tilt to follow the flow more of the outside of the saddle bag, to allow a deeper rear speaker to be mounted with enough room for proper ventilation. Max mounting depth will vary by bag manufacture. Fitment of this adapter kit will also vary by bag manufacture. Using a Quality bag or stock bag will achieve the best results. The inside diameter may have to be opened slightly as there are different speaker manufactures on the market. HOLES MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag. **due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results. Custom Made Motorcycle Aftermarket Parts, all sales are Final Sold in pairs -
Nagy's Customs 10" 98-23 JL TW-3 Adapter Rings (Pair)
Vendor:Nagys Customs1998-2023 10" JL TW-3 Adapter Rings Sold in pairs CNC molded 10” JL subwoofer adapter rings. These adapters have a setback larger than the 10” Subs and a 5" angle to clear the excursion of the speaker to ensure it doesn’t hit the shock at the top with a ½” mounting surface. With the ever-growing demand to add subs to your bag, this is a perfect solution to add some nice shallow mount subs and seal the top. The inside diameter may have to be opened slightly. This can be achieved by slightly sanding the mounting part of the adapter. Fitment will also vary by bag manufacture. Using a Quality bag or stock bag will achieve the best results. MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag. **due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results. Custom Made Parts, all sales are Final Sold in pairs
1998-2013 Rings and Toppers at a Glance
| Brand | Nagys Customs, plus a PRV Audio 10" shallow subwoofer kit |
| Ring Sizes | 8" and 10" subwoofer or midbass adapter rings, 10/8 adapter |
| Also Listed | Removable bag seals and quad outside mount |
| Compatible Drivers | Includes rings for JL TW-3 and Kicker Solo-Baric |
| Fitment | 98-23 Harley-Davidson, with 10" bag seals for 98-13 |
Summarized from the products in this collection. Confirm your model, year and fitment on each product page before ordering.
1998-2013 Harley Saddlebag Rings and Toppers
Adapter rings let an 8" or 10" subwoofer or midbass driver mount in a Harley-Davidson saddlebag lid. This collection groups the rings, bag seals and mounts used for rear speakers on 1998-2013 builds.
Match the ring to the driver, the lid and the mounting method, and check cutting and hardware needs before installing.
Related Shopping
Complete the rear section.
Subwoofers
Amplifiers
Speaker Installation
1998-2013 Hub
Choosing Rings
Check these first:
- The driver size, 8" or 10"
- Whether you need a seal for the lid
- The exact driver, since some rings are made for specific models
Questions about a driver? Call us or request a custom build consultation.
Need Help Choosing 1998-2013 Harley Saddlebag Rings & Toppers?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.