Cicada Audio Plug-and-Play Kits for Harley-Davidson
Shop complete Cicada Audio plug and play kits for Harley-Davidson Touring motorcycles across three audio platforms: 1998-2013, 2014-2023 and 2024-Present CVO or Touring.
Compare two-speaker, four-speaker, eight-speaker, Ultra, component, DSP and complete amplified plug and play systems without piecing together incompatible speakers, amplifiers, wiring, mounting hardware and radio-integration parts.
THE REFERENCE STANDARD
Choose the Correct Harley Platform
1998–2013, 2014–2023 and 2024-Present CVO or Touring kits, in Road Glide and Street Glide configurations.
- Fitment confirmed for your exact bike and year
- Parts matched to your speakers and amplifier
- Build help from a GBS specialist
Browse Collections
-
2014–2023 Harley Touring Plug & Play Audio Bundle - CXX65 + Amp Choice
Vendor:Cicada Audio2014–2023 Harley Touring Plug & Play Audio Bundle built for riders who want real highway volume and a clean install without piecing a system together. This bundle includes Cicada Audio CXX65 6.5" coaxial speakers plus your choice of a plug and play 4-channel amplifier so you can match output to your riding style and budget. Shop All 2014–2023 Plug and Play Kits Amplifier Installation Parts Speaker Installation Parts Choose your amplifier option below based on how loud you want to ride and how much headroom you want at speed. What’s Included Cicada Audio CXX65 6.5" Coaxial Speakers Plug and Play 4-Channel Amplifier Option (choose one): DS18 ION1600.4 or Cicada FLX1000 Built for 2014–2023 Harley touring bikes with plug and play focused integration Why This Bundle Works on 2014–2023 Harley Touring Bikes This bundle is built around the two things that matter most on baggers: speaker clarity and clean power. The CXX65 speakers provide a strong front-stage upgrade, and adding a dedicated 4-channel amplifier gives you the headroom needed for louder volume and cleaner sound at highway speed. With plug and play amplifier options, you get a cleaner install and more consistent results without guessing what works. Choose Your Plug and Play Amplifier Option DS18 ION1600.4 (Plug and Play Option) Built for riders who want strong output and loud, clean performance. Great for higher volume systems that need more power on tap. View DS18 ION1600.4 Amplifier Cicada Audio FLX1000 (Plug and Play Option) Clean power with strong clarity and an easy install. A great balance of output and sound quality for touring systems. View Cicada Audio FLX1000 Amplifier Speaker Details The Cicada Audio CXX65 speakers are a high-performance 6.5" coaxial upgrade designed to deliver better clarity and stronger volume than stock. When amplified, they provide a major improvement in detail and output at highway speeds. View Cicada Audio CXX65 Speakers Recommended Add-Ons for Best Results For the cleanest install and best performance, most builds pair this bundle with the correct install parts: Amplifier Installation Parts Speaker Installation Parts Specifications & Links Product Links Cicada Audio CXX65 Speakers DS18 ION1600.4D Amplifier Cicada Audio FLX1000 Amplifier If you need help choosing the right amplifier option for your speaker goals and riding style, Garage Bagger Stereo can help you dial in the best setup. Fitment Designed for 2014–2023 Harley Davidson touring motorcycles. If you have questions about your exact model or factory audio configuration, Garage Bagger Stereo can help confirm the right configuration before you order. Shop the Bundle Select your amplifier option and upgrade your 2014–2023 Harley touring audio with a plug and play bundle designed for louder volume, cleaner sound, and a cleaner install. -
Sale1998-2013 Harley-Davidson Plug and Play Audio System | Cicada Audio
Vendor:Cicada AudioThis Cicada Audio plug and play audio system is built for 1998-2013 Harley-Davidson Road Glide and Street Glide models. It bundles a Cicada Audio FLX700.4 amplifier and Cicada CHX65.4PRO 6.5" speakers with a bike-specific amplifier rack and radio-specific wiring.Key Specs Fitment: 1998-2013 Harley-Davidson Road Glide and Street Glide Amplifier: Cicada Audio FLX700.4 Speakers: Cicada CHX65.4PRO 6.5" Bike-specific amplifier rack included Wiring options for a stock Harley radio or an aftermarket radio Fitment and Installation NotesChoose the bike model (Road Glide or Street Glide) and radio type before ordering, since the parts and wiring are specific to each.Related: Plug and Play Kits and Cicada Audio. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
Sale2014–2023 Harley Touring Plug & Play Audio Bundle - CHX65 PRO + Amp Choice
Vendor:Cicada Audio2014–2023 Harley Touring Plug & Play Audio Bundle built for riders who want real highway volume and a clean install without piecing a system together. This bundle includes Cicada Audio CHX65 PRO 6.5" Pro Coaxial Horn Speakers plus your choice of a plug and play 4-channel amplifier. What’s Included Cicada Audio CHX65 PRO 6.5" Pro Coaxial Horn Speakers Plug and Play 4-Channel Amplifier Option (choose one): DS18 ION1600.4D or Cicada FLX1000 Built for 2014–2023 Harley touring bikes Speaker Details Cicada rates the CHX65 PRO at 300 watts RMS / 600 watts max with 92dB sensitivity, a Carbon Matrix Composite cone, N45SH neodymium motor and a Nanofram horn cover. It is designed for 2014 and newer H-D factory-designed speaker locations. Fitment Designed for 2014–2023 Harley-Davidson touring motorcycles. Garage Bagger Stereo can confirm your exact model and factory audio configuration before you order: start a build consultation. Shop more: 2014–2023 Plug and Play Kits, Amplifier Installation Parts, Speaker Installation Parts.Sale -
Sale2014–2023 Harley Touring Plug & Play Audio Bundle - 14CXK65 Component + Amp Choice
Vendor:Cicada Audio2014–2023 Harley Touring Plug & Play Audio Bundle built for riders who want loud, clear sound at highway speed with a clean install path. This bundle includes Cicada Audio 14CXK65 6.5" component speakers plus your choice of a plug and play 4-channel amplifier so you can match output to your riding style and budget. Shop All 2014–2023 Plug and Play Kits Amplifier Installation Parts Speaker Installation Parts Component speakers deliver stronger front-stage detail and clarity. Choose your amplifier option below based on how loud you want to ride and how much headroom you want at speed. What’s Included Cicada Audio 14CXK65 6.5" Component Speaker Kit (midbass + tweeters) Plug and Play 4-Channel Amplifier Option (choose one): Cicada FLX1400 or DS18 ION1600 Built for 2014–2023 Harley touring bikes with plug and play focused integration Why This Bundle Works on 2014–2023 Harley Touring Bikes This bundle is designed for riders who want real performance gains without a complicated build. The 14CXK65 component system improves front-stage detail and output by separating the tweeter from the midbass, and pairing it with a dedicated 4-channel amplifier gives you the clean power needed for loud, clear sound at highway speed. Plug and play amplifier options keep your installation clean and reduce guesswork so the system performs the way it should. Choose Your Plug and Play Amplifier Option Cicada Audio FLX1400 (Plug and Play Option) Best choice for riders who want maximum headroom and strong clarity. Great when you want more output potential and clean power for higher-volume riding. View Cicada Audio FLX1400 Amplifier DS18 ION1600 (Plug and Play Option) Compact efficiency with clean amplification and strong real-world output. A proven touring amp platform for loud, clear sound at speed. View DS18 ION1600 Amplifier Speaker Details The Cicada Audio 14CXK65 component kit is designed for riders who want more front-stage detail and stronger clarity than a coaxial upgrade. Component speakers separate the tweeter from the midbass, improving imaging and giving you a cleaner, more defined sound when amplified. View Cicada Audio 14CXK65 Component Speaker Kit Recommended Add-Ons for Best Results For the cleanest install and best performance, most builds pair this bundle with the correct install parts: Amplifier Installation Parts Speaker Installation Parts Product Links Included + Options Cicada Audio 14CXK65 Component Speaker Kit DS18 ION1600.4 Amplifier Cicada Audio FLX1400 Amplifier If you need help choosing the right amplifier option for your output goals and riding style, Garage Bagger Stereo can help you dial in the best setup. Fitment Designed for 2014–2023 Harley Davidson touring motorcycles. If you have questions about your exact model or factory audio configuration, Garage Bagger Stereo can help confirm the right configuration before you order. Shop the Bundle Select your amplifier option and upgrade your 2014–2023 Harley touring audio with a plug and play bundle designed for louder volume, cleaner sound, and a cleaner install.Sale -
Sale2014-2023 Harley-Davidson Ultra 4-Speaker Audio System | Cicada Audio
Vendor:Cicada AudioThe Cicada Audio 14FLXCXX-4X4U is a complete four-speaker audio system for 2014-2023 Harley-Davidson Ultra motorcycles. It combines a 4-channel FLX500.4 amplifier with 6.5-inch coaxial speakers and includes the racks and grilles for both Road Glide Ultra and Street Glide Ultra.Key Specs FLX500.4 4-channel amplifier, 125W x 4 Four 6.5-inch coaxial speakers, 2 ohm (two CXX65.2 pairs) HDTSLINKAR factory radio T-harness for plug-and-play amplifier integration HDPG8K 8 AWG power/ground install kit CHDRGG Road Glide kidney grilles and CHDSGG Street Glide round grilles 14HDAR-RG and 14HDAR-SG amplifier racks Fitment and Installation NotesBoth model-specific rack and grille sets ship in every kit, so use the pair that matches your Road Glide Ultra or Street Glide Ultra. Confirm your year, model and radio before ordering.Related: Cicada Audio, plug-and-play amplifiers, or get a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio 24FLXCXX-4X2SG 500W 2-Speaker System for 2024-Present Street Glide
Vendor:Cicada AudioThe Cicada Audio 24FLXCXX-4X2SG is a complete audio system for compatible 2024-Present Harley-Davidson Street Glide motorcycles. It pairs a 4-channel amplifier with 2 performance coaxial speakers in a two-speaker front-fairing layout.Key Specs Amplifier: 4-channel amplifier Speakers: 2 Performance Coaxial speakers Fits: 2024-Present Harley-Davidson Street Glide Cicada configuration: (2024-Present) SG - 2 Channel / 2 Speaker Fitment and Installation NotesBuilt for the 2024-Present Street Glide. Confirm radio and trim details with us before ordering.Related: Harley-Davidson plug-and-play kits, plug-and-play amplifiers, Cicada Audio.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio 24FLXCXX-4X2RG 500W 2-Speaker System for 2024-Present Road Glide
Vendor:Cicada AudioThe Cicada Audio 24FLXCXX-4X2RG is a complete audio system for compatible 2024-Present Harley-Davidson Road Glide motorcycles. It pairs a 4-channel amplifier with 2 performance coaxial speakers in a two-speaker front-fairing layout.Key Specs Amplifier: 4-channel amplifier Speakers: 2 Performance Coaxial speakers Fits: 2024-Present Harley-Davidson Road Glide Cicada configuration: (2024-Present) RG - 2 Channel / 2 Speaker Fitment and Installation NotesBuilt for the 2024-Present Road Glide. Confirm radio and trim details with us before ordering.Related: Harley-Davidson plug-and-play kits, plug-and-play amplifiers, Cicada Audio.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
Sale2024-Present Harley-Davidson 2-Speaker Plug-and-Play Audio System | Cicada
Vendor:Cicada AudioA high-output front fairing system for compatible 2024-Present and CVO Road Glide and Street Glide: two Cicada Audio CHX65.4PRO 6.5-inch pro coaxial horn speakers, a Cicada FLX1000.4 amplifier configured as two bridged 4-ohm outputs, NAV-TV factory A2B integration, two RCA Y-adapters, the Cicada HDFRBoM bridged-output harness and a Cicada 4-AWG OFC power and ground kit. Speakers: two CHX65.4PRO, 4Ω, 300W RMS / 600W maximum each, 92dB sensitivity Amplifier: FLX1000.4 bridged, up to 530W RMS × 2 at 4Ω and 14.4V Factory signal: NAV-TV Harley-Davidson A2B processor Rear speakers: not included The FLX1000.4 can produce more bridged power than each CHX65.4PRO is rated to handle, so gain, high-pass crossover and output must be set with proper test equipment. Confirm year, model, trim and A2B configuration before ordering: start a build consultation.Sale -
SaleCicada Audio 24FLXPCH-4X2SG 700W DSP 2-Speaker System for 2024-Present Street Glide
Vendor:Cicada AudioThe Cicada Audio 24FLXPCH-4X2SG is a complete audio system for compatible 2024-Present Harley-Davidson Street Glide motorcycles. It pairs a 700w 4-channel dsp amplifier with 2 coaxial horn speakers in a two-speaker front-fairing layout.Key Specs Amplifier: 700W 4-channel DSP amplifier Speakers: 2 coaxial horn speakers Fits: 2024-Present Harley-Davidson Street Glide Cicada configuration: (2024-Present) SG - 2 Channel / 2 Speaker Fitment and Installation NotesBuilt for the 2024-Present Street Glide. Confirm radio and trim details with us before ordering.Related: Harley-Davidson plug-and-play kits, plug-and-play amplifiers, Cicada Audio.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio 24FLXPCH-4X2RG 700W DSP 2-Speaker System for 2024-Present Road Glide
Vendor:Cicada AudioThe Cicada Audio 24FLXPCH-4X2RG is a complete audio system for compatible 2024-Present Harley-Davidson Road Glide motorcycles. It pairs a 700w 4-channel dsp amplifier with 2 coaxial horn speakers in a two-speaker front-fairing layout.Key Specs Amplifier: 700W 4-channel DSP amplifier Speakers: 2 coaxial horn speakers Fits: 2024-Present Harley-Davidson Road Glide Cicada configuration: (2024-Present) RG - 2 Channel / 2 Speaker Fitment and Installation NotesBuilt for the 2024-Present Road Glide. Confirm radio and trim details with us before ordering.Related: Harley-Davidson plug-and-play kits, plug-and-play amplifiers, Cicada Audio.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
Sale2024-Present Road Glide 2-Speaker DSP Audio System | Cicada
Vendor:Cicada Audio2023 CVO / 2024-Present ROAD GLIDE AUDIO 2023 CVO / 2024-Present Road Glide 2-Speaker DSP Audio System | Cicada Upgrade a compatible late-model Harley-Davidson Road Glide with a complete front component audio system built around Cicada Audio 24CXK65.2RG speakers, the current FLX1400.4PRO four-channel DSP amplifier, NAV-TV factory A2B integration and motorcycle-ready 4-AWG power wiring. The system places two high-output 6.5-inch mid-bass drivers and two shallow horn tweeters in the Road Glide fairing. The amplifier’s integrated six-channel DSP provides crossover control, equalization, output management and system-expansion capability. See Everything Included View Component Layout Complete Road Glide Fairing System Road Glide-specific component speaker system Cicada 24CXK65.2RG component kit Two 2-ohm 6.5-inch mid-bass drivers Two 4-ohm shallow horn tweeters External 12dB passive crossovers FLX1400.4PRO four-channel DSP amplifier 350 watts RMS × 4 at 2 ohms Six DSP channels: four amplified and two pass-through Bluetooth audio streaming USB-C computer-based DSP tuning DIALD app-compatible configuration NAV-TV ZEN-H factory A2B integration Cicada HDPG4K 4-AWG power kit Complete Road Glide DSP Audio System This Garage Bagger Stereo package combines a Road Glide-specific Cicada component speaker system, a high-power DSP amplifier, factory A2B integration and heavy-gauge amplifier wiring into one complete front-fairing audio upgrade. The 24CXK65.2RG uses two 2-ohm mid-bass drivers for strong vocal and mid-bass output. Two separate shallow ring-radiator horn tweeters provide high-frequency projection through Road Glide-specific locations. The current FLX1400.4PRO supplies four amplified DSP channels plus two DSP-controlled pass-through channels. Two amplified channels operate the front component system, leaving two amplified channels and two pass-through outputs available for properly designed expansion. Component-system clarification: This is described as a two-speaker system because it uses two primary 6.5-inch fairing speaker positions. The complete component system contains four individual drivers: two mid-bass speakers and two tweeters. Road Glide Fitment 2023 CVO Road Glide Verify the exact motorcycle, fairing, factory radio, factory amplifier and A2B configuration before ordering for a late-production CVO Road Glide. 2024-Present Road Glide The 24CXK65.2RG speaker package is designed around compatible redesigned 2024-Present Road Glide factory speaker locations. Road Glide configuration: This system uses the Road Glide-specific 24CXK65.2RG component kit. It is not the Street Glide speaker configuration. Confirm the exact year, model and trim before ordering. Everything Included in the Audio System Cicada 24CXK65.2RG Component Kit One Road Glide-specific component speaker package with two 2-ohm 6.5-inch mid-bass drivers and two 4-ohm shallow horn tweeters. External Passive Crossovers Two custom 12dB crossover networks filter and protect the shallow horn tweeters. Tweeter Attenuation Resistors Resistor options allow the high-frequency output to be reduced by 3dB or 6dB when required by the installation and final tuning. Cicada FLX1400.4PRO DSP Amplifier One current-generation four-channel Class-D amplifier with six DSP channels, Bluetooth streaming, USB-C tuning and DIALD software support. NAV-TV ZEN-H A2B Interface Factory A2B interface that converts the compatible Harley-Davidson digital audio signal into analog outputs for the Cicada amplifier. Cicada HDPG4K Power Kit 4-AWG power and ground wiring with battery terminals, amplifier ferrules, remote wiring and waterproof Mini-ANL fuse protection. Confirm package hardware: Verify the Road Glide amplifier rack, A2B-to-amplifier harness, speaker-output wiring and required mounting hardware included with the active Shopify bundle. Front Component Speaker Layout Left Fairing Position One 2-ohm 6.5-inch mid-bass driver One 4-ohm shallow horn tweeter One external passive crossover One dedicated amplified DSP channel Right Fairing Position One 2-ohm 6.5-inch mid-bass driver One 4-ohm shallow horn tweeter One external passive crossover One dedicated amplified DSP channel Primary Speaker Positions Two Road Glide fairing locations Mid-Bass Drivers Two 2Ω 6.5-inch drivers Tweeters Two 4Ω shallow horn tweeters Total Individual Drivers Four Amplified Front Channels Two Available Amplified Channels Two Available DSP Pass-Through Channels Two Component wiring: Install each mid-bass driver, tweeter and passive crossover according to the supplied Cicada component speaker instructions. Do not connect either tweeter directly to an unfiltered amplifier output. Cicada 24CXK65.2RG Component Speaker Kit The 24CXK65.2RG is engineered for compatible 2024-Present Road Glide factory speaker locations. Carbon Matrix Composite cones, neodymium motors and aluminum shallow horn tweeters provide high-output performance in a compact motorcycle-ready package. 250W RMS Mid-Bass Each 6.5-inch mid-bass driver handles 250 watts RMS. 200W RMS Tweeters Each tweeter handles 200 watts RMS through the correct crossover. Road Glide Fitment Designed around compatible late-model Road Glide locations. Carbon Matrix Cones Lightweight cone construction supports efficient projection. Neodymium Motors Compact high-strength motors reduce weight while maintaining output. All-Weather Design Motorcycle-ready materials support fairing installation. Component Kit 24CXK65.2RG Application Compatible 2024-Present Harley-Davidson Road Glide Mid-Bass Size 6.5 inches Mid-Bass Impedance 2Ω per driver Mid-Bass Power 250W RMS / 500W maximum per driver Mid-Bass Voice Coil 2 inches / 51mm Mid-Bass Cone Carbon Matrix Composite Mid-Bass Sensitivity 94dB, 1W / 1m Mid-Bass Response 70Hz–20kHz ±3dB Mid-Bass Mounting Depth 2.64 inches / 67mm Mid-Bass Mounting Diameter 5.67 inches / 144mm Tweeter Size One inch Tweeter Impedance 4Ω per tweeter Tweeter Power 200W RMS / 400W maximum per tweeter Tweeter Diaphragm Aluminum Tweeter Sensitivity 107dB, 1W / 1m Tweeter Response 2kHz–20kHz ±3dB Passive Crossover External 12dB crossover at 7kHz Tweeter Attenuation Optional -3dB and -6dB resistor settings Cicada FLX1400.4PRO 350W × 4-Channel DSP Amplifier The current FLX1400.4PRO combines four high-power amplified channels with six-channel DSP processing. Four DSP channels feed the built-in amplifier outputs, while two additional DSP channels provide pass-through outputs for future equipment. 225W × 4 at 4Ω Four-channel output at 14.4 volts into 4-ohm loads. 350W × 4 at 2Ω Four-channel output for the included 2-ohm mid-bass system. 700W × 2 Bridged Bridged output into compatible 4-ohm loads. Six-Channel DSP Four amplified DSP channels plus two pass-through channels. Bluetooth Streaming Stream audio directly through the amplifier’s Bluetooth input. USB-C Tuning Connect a computer for detailed DIALD DSP configuration. Amplifier Model Cicada Audio FLX1400.4PRO Amplifier Type Four-channel Class-D amplifier with six-channel DSP DSP Architecture Four amplified channels and two pass-through channels Output at 4Ω / 14.4V 225W RMS × 4 Output at 2Ω / 14.4V 350W RMS × 4 Bridged Output at 4Ω / 14.4V 700W RMS × 2 Frequency Response 20Hz–20kHz ±3dB THD + Noise 0.1% at 2Ω per channel and 10% rated power Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Efficiency 80% DSP Crossover Modes High-pass / band-pass / low-pass DSP Crossover Range 20Hz–20kHz DSP Crossover Slopes 6, 12, 24 or 48dB per octave Input Sensitivity 12V–0.2V Bluetooth Audio Included Computer Connection USB-C DSP Software DIALD PC and app-based configuration iOS App Compatibility Yes Operating Voltage 9V–16V Music Current Draw 70A Maximum Current Draw 150A Recommended Fuse 100A Turn-On Options Remote / DC / VOX Power Input 4-AWG Speaker Outputs 12-AWG busbar-style connections Dimensions With Brackets 8.26 × 4.9 × 2 inches / 210 × 125 × 51mm Chassis Dimensions 7.1 × 4.9 × 2 inches / 180 × 125 × 51mm Warranty Two years through Cicada Audio Speaker protection required: The amplifier produces more continuous power at 2 ohms than each included mid-bass driver is rated to handle. Use correct high-pass filtering, gain structure and DSP output limiting. NAV-TV ZEN-H Factory A2B Integration The ZEN-H allows the compatible factory Harley-Davidson radio to feed the Cicada DSP amplifier without replacing the factory infotainment system. Factory A2B Conversion Converts the compatible factory signal into analog outputs. Eight Output Channels Supports the front system and properly planned future expansion. Factory Control Retention Retains supported factory audio controls and radio operation. DSP clarification: The standard ZEN-H provides the A2B signal conversion. The FLX1400.4PRO supplies the system’s DSP processing, Bluetooth streaming and tuning functions. Power Wiring and Fuse Protection The Cicada HDPG4K supplies the heavy-gauge power and ground foundation required for the FLX1400.4PRO installation. Power Kit Cicada Audio HDPG4K Power Cable 4-AWG OFC cable Ground Cable 4-AWG OFC cable Fuse Holder Waterproof Mini-ANL Amplifier Recommended Fuse 100A Fuse selection: Use the supplied 100-amp fuse only after confirming that the complete wiring, fuse holder, terminals and installation comply with current Cicada guidance for the FLX1400.4PRO. DSP Setup and Component Protection Install both passive tweeter crossovers correctly. Do not connect either tweeter directly to unfiltered amplifier output. Configure protective high-pass filtering for both front channels. Set gain using measured clean output rather than by ear. Use DSP output limiting to protect the mid-bass drivers. Use equalization to correct fairing-specific response issues. Use time alignment to improve left-to-right arrival timing. Confirm tweeter polarity and attenuation before final assembly. Reduce output immediately if distortion or mechanical noise occurs. Professional tuning recommended: Final crossover, equalization, time alignment, gain and limiting settings depend on the motorcycle, installation and intended listening level. Installation Instructions and Resources Speaker Installation Cicada Speaker and Crossover Installation Speaker Polarity Check Road Glide and A2B Installation Road Glide Fairing Removal Late-Model Harley T-Harness Installation Motorcycle Amplifier Installation Parts Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Complete System Specifications System Type Two-position Road Glide component system with DSP amplifier Primary Applications Compatible 2023 CVO Road Glide and 2024-Present Road Glide Component Speaker Kit Cicada Audio 24CXK65.2RG Mid-Bass Drivers Two 6.5-inch 2Ω drivers Tweeters Two one-inch 4Ω shallow horn tweeters Amplifier Cicada Audio FLX1400.4PRO Amplifier Output at 2Ω 350W RMS × 4 at 14.4V DSP Channels Six total: four amplified and two pass-through Amplified Front Channels Used Two Available Amplified Channels Two Available DSP Pass-Through Channels Two Factory Signal Integration NAV-TV ZEN-H A2B interface Power Wiring Cicada Audio HDPG4K 4-AWG installation kit Built-In Amplifier DSP Yes Bluetooth Audio Streaming Yes USB-C DSP Tuning Yes Rear Speakers Included No Fitment and Ordering Notes Submit complete motorcycle information: Confirm the motorcycle year, exact Road Glide model, trim, factory radio, factory amplifier, A2B configuration and current audio modifications. This product is configured for compatible Road Glide motorcycles. The speaker kit uses two 2-ohm mid-bass drivers. The speaker kit uses two 4-ohm shallow horn tweeters. Both passive crossover networks must be used. Two amplifier channels operate the front component system. Two amplified DSP channels remain available for expansion. Two additional DSP pass-through channels are available. Rear speakers and rear mounting components are not included. Verify speaker depth, grille clearance and crossover placement. Verify amplifier mounting space and rack compatibility. Correct DSP setup and output limiting are required. Professional installation and tuning are strongly recommended. Related Motorcycle Audio Categories Road Glide and Cicada Audio 2023 CVO / 2024-present Harley Plug-and-Play Kits Shop Cicada Audio Shop Motorcycle Speakers Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Road Glide DSP Audio System FAQ Which amplifier is included? The system includes the current Cicada Audio FLX1400.4PRO 350-watt × four-channel DSP amplifier. Is this the discontinued FLX1400.4P? No. This updated package uses the current FLX1400.4PRO amplifier. How many speakers are included? The system uses two primary fairing positions and contains two mid-bass drivers and two separate tweeters. How much power does the amplifier produce at 2 ohms? The FLX1400.4PRO produces 350 watts RMS per channel at 2 ohms and 14.4 volts. How many DSP channels does the amplifier provide? It provides six DSP channels: four amplified outputs and two pass-through outputs. Does the amplifier support Bluetooth audio? Yes. Bluetooth audio streaming is built into the FLX1400.4PRO. How is the DSP configured? The amplifier supports USB-C computer tuning and DIALD app-based configuration. Are passive tweeter crossovers included? Yes. The component kit includes external crossover networks and tweeter-attenuation resistor options. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley-Davidson A2B signal into analog outputs for the Cicada amplifier. Are all four amplified channels used? No. Two channels operate the front component system, leaving two amplified channels available for properly matched expansion. Are rear speakers included? No. Rear speakers, rear wiring and rear mounting components must be added separately. Is professional tuning recommended? Yes. Proper crossover, equalization, limiting and gain configuration are essential because the amplifier has more available output than the included mid-bass drivers require. Need Help Matching This Road Glide Audio System? Garage Bagger Stereo can help verify Road Glide fitment, component impedance selection, amplifier matching, fairing speaker and amplifier mounting, power and speaker wiring, passive crossover placement and factory A2B signal integration before installation. Installation Services Request a Custom BuildSale -
Sale2024-Present Street Glide 2-Speaker DSP Audio System | Cicada
Vendor:Cicada Audio2023 CVO / 2024-Present STREET GLIDE AUDIO 2023 CVO / 2024-Present Street Glide 2-Speaker DSP Audio System | Cicada Upgrade a compatible late-model Harley-Davidson Street Glide with a complete front component audio system built around Cicada Audio 24CXK65.2SG speakers, the current FLX1400.4PRO four-channel DSP amplifier, NAV-TV factory A2B integration and motorcycle-ready 4-AWG power wiring. The system places two high-output 6.5-inch mid-bass drivers and two shallow horn tweeters in the Street Glide fairing. The amplifier’s integrated six-channel DSP provides crossover control, equalization, output management and future system-expansion capability. See Everything Included View Component Layout Complete Street Glide Fairing System Street Glide-specific component speaker system Cicada 24CXK65.2SG component kit Two 2-ohm 6.5-inch mid-bass drivers Two 4-ohm shallow horn tweeters External 12dB passive crossovers FLX1400.4PRO four-channel DSP amplifier 350 watts RMS × 4 at 2 ohms Six DSP channels: four amplified and two pass-through Bluetooth audio streaming USB-C computer-based DSP tuning DIALD app-compatible configuration NAV-TV ZEN-H factory A2B integration Cicada HDPG4K 4-AWG power kit Complete Street Glide DSP Audio System This Garage Bagger Stereo package combines a Street Glide-specific Cicada component speaker system, a high-power DSP amplifier, factory A2B integration and heavy-gauge amplifier wiring into one complete front-fairing audio upgrade. The 24CXK65.2SG uses two 2-ohm mid-bass drivers for strong vocal and mid-bass output. Two separate shallow ring-radiator horn tweeters provide high-frequency projection from compatible Street Glide factory-designed locations. The FLX1400.4PRO supplies four amplified DSP channels plus two DSP-controlled pass-through channels. Two amplified channels operate the front component system, leaving two amplified channels and two pass-through outputs available for a properly designed future expansion. Component-system clarification: This is described as a two-speaker system because it uses two primary 6.5-inch fairing speaker positions. The complete component system contains four individual drivers: two mid-bass speakers and two tweeters. Street Glide Fitment 2023 CVO Street Glide Verify the exact motorcycle, fairing, factory radio, factory amplifier and A2B configuration before ordering for a late-production CVO Street Glide. 2024-Present Street Glide The 24CXK65.2SG component speaker kit is designed around compatible redesigned 2024-Present Street Glide factory speaker locations. Street Glide configuration: This system uses the Street Glide-specific 24CXK65.2SG component kit. It is not the Road Glide speaker configuration. Confirm the exact year, model and trim before ordering. Everything Included in the Audio System Cicada 24CXK65.2SG Component Kit One Street Glide-specific component speaker package with two 2-ohm 6.5-inch mid-bass drivers and two 4-ohm shallow horn tweeters. External Passive Crossovers Two custom 12dB crossover networks filter and protect the shallow horn tweeters at the manufacturer-specified crossover frequency. Tweeter Attenuation Resistors Resistor options allow the high-frequency output to be reduced by 3dB or 6dB when required by the installation and final tuning. Cicada FLX1400.4PRO DSP Amplifier One current-generation four-channel Class-D amplifier with six DSP channels, Bluetooth streaming, USB-C tuning and DIALD software support. NAV-TV ZEN-H A2B Interface Factory A2B interface that converts the compatible Harley-Davidson digital audio signal into analog RCA outputs for the Cicada amplifier. Cicada HDPG4K Power Kit 4-AWG power and ground wiring with battery terminals, amplifier ferrules, remote wiring and waterproof Mini-ANL fuse protection. Confirm package hardware: Verify the Street Glide amplifier rack, A2B-to-amplifier harness, speaker-output wiring and required mounting hardware included with the active Shopify bundle. Front Component Speaker Layout Left Fairing Position One 2-ohm 6.5-inch mid-bass driver One 4-ohm shallow horn tweeter One external passive crossover One dedicated amplified DSP channel Right Fairing Position One 2-ohm 6.5-inch mid-bass driver One 4-ohm shallow horn tweeter One external passive crossover One dedicated amplified DSP channel Primary Speaker Positions Two Street Glide fairing locations Mid-Bass Drivers Two 2Ω 6.5-inch drivers Tweeters Two 4Ω shallow horn tweeters Total Individual Drivers Four Amplified Front Channels Two Available Amplified Channels Two Available DSP Pass-Through Channels Two Component wiring: Install each mid-bass driver, tweeter and passive crossover according to the supplied Cicada component speaker instructions. Do not connect either tweeter directly to an unfiltered amplifier output. Cicada 24CXK65.2SG Component Speaker Kit The 24CXK65.2SG is engineered for compatible 2024-Present Street Glide factory-designed speaker locations. Carbon Matrix Composite cones, neodymium motors and aluminum shallow horn tweeters provide high-output performance in a compact motorcycle-ready package. 250W RMS Mid-Bass Each 6.5-inch mid-bass driver handles 250 watts RMS. 200W RMS Tweeters Each tweeter handles 200 watts RMS through the correct crossover. Street Glide Fitment Designed around compatible late-model Street Glide locations. Carbon Matrix Cones Lightweight cone construction supports efficient projection. Neodymium Motors Compact high-strength motors reduce weight while maintaining output. Rain or Shine Design All-weather materials support exposed fairing installations. Component Kit 24CXK65.2SG Application Compatible 2024-Present Harley-Davidson Street Glide Mid-Bass Size 6.5 inches Mid-Bass Impedance 2Ω per driver Mid-Bass Power 250W RMS / 500W maximum per driver Mid-Bass Voice Coil 2 inches / 51mm Mid-Bass Cone Carbon Matrix Composite Mid-Bass Magnet N35SH neodymium Mid-Bass Sensitivity 94dB, 1W / 1m Mid-Bass Response 70Hz–20kHz ±3dB Mid-Bass Mounting Depth 2.64 inches / 67mm Mid-Bass Mounting Diameter 5.67 inches / 144mm Tweeter Size One inch Tweeter Impedance 4Ω per tweeter Tweeter Power 200W RMS / 400W maximum per tweeter Tweeter Diaphragm Aluminum Tweeter Sensitivity 107dB, 1W / 1m Tweeter Response 2kHz–20kHz ±3dB Passive Crossover External 12dB crossover at 7kHz Tweeter Attenuation Optional -3dB and -6dB resistor settings Warranty Two years through Cicada Audio Cicada FLX1400.4PRO 350W × 4-Channel DSP Amplifier The FLX1400.4PRO combines four high-power amplified channels with six-channel DSP processing. Four DSP channels feed the built-in amplifier outputs, while two additional DSP channels provide pass-through outputs for future equipment. 225W × 4 at 4Ω Four-channel output at 14.4 volts into 4-ohm loads. 350W × 4 at 2Ω Four-channel output for compatible 2-ohm speaker channels. 700W × 2 Bridged Bridged output into compatible 4-ohm loads. Six-Channel DSP Four amplified DSP channels plus two pass-through channels. Bluetooth Streaming Stream audio directly through the amplifier’s Bluetooth input. USB-C Tuning Connect a computer for detailed DIALD DSP configuration. Amplifier Model Cicada Audio FLX1400.4PRO Amplifier Type Four-channel Class-D amplifier with six-channel DSP DSP Architecture Four amplified channels and two pass-through channels Output at 4Ω / 14.4V 225W RMS × 4 Output at 2Ω / 14.4V 350W RMS × 4 Bridged Output at 4Ω / 14.4V 700W RMS × 2 Frequency Response 20Hz–20kHz ±3dB THD + Noise 0.1% at 2Ω per channel and 10% rated power Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Efficiency 80% DSP Crossover Modes High-pass / band-pass / low-pass DSP Crossover Range 20Hz–20kHz DSP Crossover Slopes 6, 12, 24 or 48dB per octave Input Sensitivity 12V–0.2V Bluetooth Audio Included Computer Connection USB-C DSP Software DIALD PC and app-based configuration iOS App Compatibility Yes Operating Voltage 9V–16V Music Current Draw 70A Maximum Current Draw 150A Recommended Fuse 100A Turn-On Options Remote / DC / VOX Power Input 4-AWG Speaker Outputs 12-AWG busbar-style connections Dimensions With Brackets 8.26 × 4.9 × 2 inches / 210 × 125 × 51mm Chassis Dimensions 7.1 × 4.9 × 2 inches / 180 × 125 × 51mm Warranty Two years through Cicada Audio Speaker protection required: The amplifier produces more continuous power at 2 ohms than each included mid-bass driver is rated to handle. Use correct high-pass filtering, gain structure and DSP output limiting. NAV-TV ZEN-H Factory A2B Integration The ZEN-H allows the compatible factory Harley-Davidson radio to feed the Cicada DSP amplifier without replacing the factory infotainment system. Eight RCA Outputs Provides eight low-level analog channels for aftermarket equipment. Up to 5V RMS Supplies a strong preamplifier signal to the Cicada amplifier. Factory Control Retention Retains supported volume, balance, fader, chimes and EQ presets. DSP clarification: The standard ZEN-H provides A2B signal conversion. The FLX1400.4PRO supplies the system’s DSP processing, Bluetooth streaming and tuning functions. Power Wiring and Fuse Protection The Cicada HDPG4K supplies the heavy-gauge power and ground foundation required for the FLX1400.4PRO installation. Power Kit Cicada Audio HDPG4K Power Cable Six-foot 4-AWG cable with protective over-braid Ground Cable Six-foot 4-AWG cable with protective over-braid Battery Connections Preinstalled ring terminals Amplifier Connections Preinstalled ferrules Remote Trigger Remote wire with Harley-Davidson plug Fuse Holder Waterproof Mini-ANL Supplied Fuse Options 60A, 80A and 100A Amplifier Recommended Fuse 100A Fuse selection: Confirm that the complete wiring, holder, terminals and supplied 100-amp fuse comply with current Cicada guidance before powering the FLX1400.4PRO. DSP Setup and Component Protection Install both passive tweeter crossovers correctly. Do not connect either tweeter directly to unfiltered amplifier output. Configure protective high-pass filtering for both front channels. Set gain using measured clean output rather than by ear. Use DSP output limiting to protect the mid-bass drivers. Use equalization to correct fairing-specific response issues. Use time alignment to improve left-to-right arrival timing. Confirm tweeter polarity and attenuation before final assembly. Reduce output immediately if distortion or mechanical noise occurs. Professional tuning recommended: Final crossover, equalization, time alignment, gain and limiting settings depend on the motorcycle, installation and intended listening level. Installation Instructions and Resources Speaker Installation Cicada Speaker and Crossover Reference Speaker Polarity Check Street Glide and A2B Installation Street Glide Fairing Removal Late-Model Harley T-Harness Installation Motorcycle Amplifier Installation Parts Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Complete System Specifications System Type Two-position Street Glide component system with DSP amplifier Primary Applications Compatible 2023 CVO Street Glide and 2024-Present Street Glide Component Speaker Kit Cicada Audio 24CXK65.2SG Mid-Bass Drivers Two 6.5-inch 2Ω drivers Tweeters Two one-inch 4Ω shallow horn tweeters Total Individual Drivers Four Amplifier Cicada Audio FLX1400.4PRO Amplifier Output at 2Ω 350W RMS × 4 at 14.4V DSP Channels Six total: four amplified and two pass-through Amplified Front Channels Used Two Available Amplified Channels Two Available DSP Pass-Through Channels Two Factory Signal Integration NAV-TV ZEN-H A2B interface Power Wiring Cicada Audio HDPG4K 4-AWG installation kit Built-In Amplifier DSP Yes Bluetooth Audio Streaming Yes USB-C DSP Tuning Yes Rear Speakers Included No Shopify Variants None Fitment and Ordering Notes Submit complete motorcycle information: Confirm the motorcycle year, exact Street Glide model, trim, factory radio, factory amplifier, A2B configuration and current audio modifications. This product is configured for compatible Street Glide motorcycles. The speaker kit uses two 2-ohm mid-bass drivers. The speaker kit uses two 4-ohm shallow horn tweeters. Both passive crossover networks must be used. Two amplifier channels operate the front component system. Two amplified DSP channels remain available for expansion. Two additional DSP pass-through channels are available. Rear speakers and rear mounting components are not included. Verify speaker depth, grille clearance and crossover placement. Verify amplifier mounting space and rack compatibility. Correct DSP setup and output limiting are required. Professional installation and tuning are strongly recommended. Current Shipping Promotion Enter code ShipOne at checkout for eligible free shipping. Current checkout eligibility and product exclusions apply. Related Motorcycle Audio Categories Street Glide and Cicada Audio 2023 CVO / 2024-present Harley Plug-and-Play Kits Shop Cicada Audio Shop Motorcycle Speakers Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Street Glide DSP Audio System FAQ Which component speaker kit is included? The system includes the Street Glide-specific Cicada Audio 24CXK65.2SG component speaker kit. Which amplifier is included? The system includes the current Cicada Audio FLX1400.4PRO 350-watt × four-channel DSP amplifier. Is this the discontinued FLX1400.4P? No. This updated package uses the current FLX1400.4PRO amplifier. How many speakers are included? The system uses two primary fairing positions and contains two mid-bass drivers and two separate tweeters. What impedance are the mid-bass drivers? Each 6.5-inch mid-bass driver has a nominal impedance of 2 ohms. What impedance are the tweeters? Each shallow horn tweeter has a nominal impedance of 4 ohms. Are passive tweeter crossovers included? Yes. The component kit includes external 12dB crossover networks and tweeter-attenuation resistor options. How much power does the amplifier produce at 2 ohms? The FLX1400.4PRO produces 350 watts RMS per channel at 2 ohms and 14.4 volts. How many DSP channels does the amplifier provide? It provides six DSP channels: four amplified outputs and two pass-through outputs. Does the amplifier support Bluetooth audio? Yes. Bluetooth audio streaming is built into the FLX1400.4PRO. How is the DSP configured? The amplifier supports USB-C computer tuning and DIALD app-based configuration. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley-Davidson A2B signal into analog RCA outputs for the Cicada amplifier. Does the ZEN-H provide the system DSP? No. The standard ZEN-H performs A2B signal conversion. The FLX1400.4PRO provides the system’s DSP processing. Are all four amplified channels used? No. Two channels operate the front component system, leaving two amplified channels available for properly matched expansion. Are rear speakers included? No. Rear speakers, rear wiring and rear mounting components must be added separately. Is professional tuning recommended? Yes. Proper crossover, equalization, limiting and gain configuration are essential because the amplifier has more available output than the included mid-bass drivers require. Need Help Matching This Street Glide Audio System? Garage Bagger Stereo can help verify Street Glide fitment, component impedance selection, amplifier matching, fairing speaker and amplifier mounting, power and speaker wiring, passive crossover placement and factory A2B signal integration before installation. Installation Services Request a Custom BuildSale
Shop Cicada Kits by Harley-Davidson Generation
Harley-Davidson audio architecture, radio integration, fairing construction and amplifier mounting changed substantially across these generations. Start with the motorcycle year range before comparing speaker count, amplifier power or DSP options.
1998–2013: Legacy Harley Touring Audio
Shop Cicada systems for compatible earlier Road Glide and Street Glide motorcycles using the correct fairing, amplifier rack, speaker adapter and radio-specific wiring configuration.
- Road Glide and Street Glide options
- Stock-radio and aftermarket-radio configurations
- Bike-specific amplifier mounting
- Fairing speaker and complete amplified systems
2014–2023: Rushmore Harley Touring Audio
Shop complete Cicada systems for the established 2014–2023 Touring platform, including Road Glide, Street Glide and four-speaker Ultra configurations.
- Two-speaker and four-speaker systems
- Road Glide and Street Glide packages
- Standard Ultra and Road Glide Ultra systems
- Coaxial, pro-coaxial and component options
2024-Present: Current Harley Touring Audio
Shop Cicada systems developed for the newest Harley-Davidson Touring platform, including the correct Road Glide or Street Glide hardware and current factory-radio integration path.
- 2024-Present CVO and Touring support
- Road Glide and Street Glide-specific systems
- Factory A2B signal integration options
- DSP and non-DSP amplifier packages
Cicada Audio Harley-Davidson Plug-and-Play Speaker and Amplifier Systems
The 1998-2013 system bundles an FLX700.4 amplifier with CHX654 6.5 inch speakers and a bike-specific amplifier rack, with wiring for a stock or aftermarket radio. For 2014-2023 Ultra models, the 14FLXCXX-4X4U pairs an FLX500.4 amplifier at 125W x 4 with four 6.5 inch 2 ohm coaxial speakers.
2024-Present Street Glide and Road Glide Systems
The 24FLXCXX series is the 500W line: the 4X2SG adds 2 performance coaxial speakers. The 24FLXPCH-4X2SG uses a 700W DSP amplifier with 2 coaxial horn speakers, and the 24FLXCHX-4X4SG uses a 1400W amplifier with 4 pro coaxial horn speakers. The FLX1000.4 two-speaker system bridges to 530W RMS x 2 at 14.4V for two 300W RMS CHX65.4 speakers. Shop Cicada coaxial speakers or Cicada amplifiers separately.
Need Help Choosing Cicada Audio Plug-and-Play Kits for Harley-Davidson?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.