
-
Description
-
Reviews
DB Drive Euphoria XPERT EXM8N-CFV2 8" NEO Carbon Fiber Midrange (Single)
The DB Drive EXM8N-CFV2 is an 8" neodymium carbon fiber midrange driver. It handles 300 watts, runs at 4Ω, and is rated at 99.8dB sensitivity with a 50Hz–13kHz frequency response. This listing is for a single driver.
High-Efficiency 8" Midrange for Harley Audio
A carbon fiber cone and neodymium motor in a die-cast aluminum basket.
- 300 watts power handling / 600 watts dynamic
- 99.8dB sensitivity, 4Ω
- 50Hz–13kHz frequency response
Key Product Details
| Product | DB Drive Euphoria XPERT EXM8N-CFV2 8" NEO Carbon Fiber Midrange |
| Impedance | 4Ω |
| Power Handling | 300W / 600W dynamic |
| Mounting | 7.09" / 180mm cutout, 3.29" / 83.5mm depth |
| Sold As | Single (order two for a pair) |
Always verify impedance, speaker location, mounting depth, amplifier power, wiring, crossover setup, and final fitment before ordering for your Harley-Davidson audio build.
A High-Output Carbon Fiber Midrange
The EXM8N-CFV2 uses an IP65 rated carbon fiber cone with a cloth surround, a 2.0" voice coil and a neodymium ring magnet assembly.
- Die-cast aluminum basket with radial venting.
- Compression-style speaker terminals.
- Built for midrange output in a multi-driver system.
Specifications
| Size | 8" NEO carbon fiber midrange |
| Impedance | 4Ω |
| Power Handling | 300 watts / 600 watts dynamic |
| Sensitivity | 99.8dB (1W/1m) |
| Frequency Response | 50Hz–13kHz |
| Voice Coil | 2.0" / 51mm |
| Overall Diameter | 8.29" / 210.5mm |
| Mounting Cutout | 7.09" / 180mm |
| Mounting Depth | 3.29" / 83.5mm |
Fitment and System Planning
Confirm driver depth, cutout, pod or enclosure space, wiring path, impedance and amplifier compatibility before installation.
Plan a crossover or DSP setup so the midrange is filtered correctly. Confirm your year and model with Garage Bagger Stereo before ordering the EXM8N-CFV2.
What to Pair With the EXM8N-CFV2
These parts help you power, wire and tune the driver correctly.
Motorcycle Amplifiers
Power the driver with an amplifier built for Harley-Davidson audio.
Motorcycle DSP
Set crossovers and tune the system with a digital sound processor.
Speaker Installation Parts
Adapters, rings, grilles and mounting parts for speaker installs.
DB Drive Motorcycle Audio
More DB Drive speakers and subwoofers.
Related DB Drive & Motorcycle Audio Paths
Build the system around the correct driver, amplifier, DSP, wiring, and installation parts. These related collections help match the EXM8N-CFV2 with the right Harley audio upgrade path.
Best Use for the EXM8N-CFV2
Choose it for a high-efficiency midrange position in a multi-driver system with DSP tuning.
Amplified System Recommended
This driver is intended for serious motorcycle audio systems. For best results, match the EXM8N-CFV2 with proper amplifier power, correct impedance, clean wiring, and a real tuning plan.
DB Drive EXM8N-CFV2 FAQ
What impedance is the EXM8N-CFV2?
It is a 4Ω driver. Match it to an amplifier and wiring plan that supports 4Ω.
How much power can it handle?
DB Drive lists 300 watts power handling and 600 watts dynamic wattage.
What are the mounting dimensions?
DB Drive lists a 7.09 inch (180mm) mounting cutout and a 3.29 inch (83.5mm) mounting depth. Verify the available depth and cutout in your location before ordering.
What is the frequency response?
DB Drive lists 50Hz to 13kHz.
Is the EXM8N-CFV2 sold as a pair?
No. This listing is for a single driver, so order two if you need a pair.
Does Garage Bagger Stereo install the EXM8N-CFV2?
Garage Bagger Stereo offers motorcycle audio installation at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131 to check scheduling.
Need Help Choosing?
Tell us your bike, year and where the midrange will mount, and we will confirm depth, cutout and amplifier match before you order.
