Harley Plug-and-Play Amplifiers
Harley-Davidson plug and play amplifiers: four-channel models from Cicada Audio (FLX series, including the FLX700.4PRO and FLX1400.4PRO DSP versions), DS18 (ION series), DB Drive (Euphoria XPERT) and SounDigital (XP series), plus Diamond Audio NEO DSP amplifiers in 6-channel and monoblock versions. Compare output per channel, match it to your speakers, and confirm the harness for your bike year (1998-2013, 2014-2023 or 2024-Present).
Build It Right the First Time
Not sure which parts fit your exact bike and setup? Start with a clean, correct plan.
- Fitment confirmed for your exact bike and year
- Parts matched to your speakers and amplifier
- Build help from a GBS specialist
Browse Collections
-
SaleSounDigital 1200.4 XP - 4Ω or 2Ω Amplifier
Vendor:SounDigitalSounDigital 1200.4 XP - 4Ω or 2Ω 4-Channel Amplifier The NEW SounDigital XP motorcycle amplifiers are composed of the highest-quality components, allow high-quality sound from your speakers, and are more efficient for your motorcycle or marine speaker system. Using the latest technology, this motorcycle amplifier features a compact design to allow installation in tight areas. This motorcycle amplifier is the perfect addition to any sound system. Garage Bagger Stereo has a large stock of powerful audio amplifiers and other SounDigital products. SounDigital 1200.4 XP Motorcycle Amplifier 1200.4 XP - 2 Ω Power @ 12.6V @ 4Ω: 4 X 131 WRMS Power @ 12.6V @ 2Ω: 4 X 198 WRMS Power @ 12.6V @ 1Ω: 4 X 300 WRMS Bridge Power @ 12.6V @ 4Ω: 2 X 396 WRMS Bridge Power @ 12.6V @ 2Ω: 2 X 600 WRMS Product Dimensions: 7.09 x 5.35 x 2.22 in 1200.4 XP - 4 Ω Power @ 12.6V @ 4Ω: 4 X 198 WRMS Power @ 12.6V @ 2Ω: 4 X 300 WRMS Power @ 12.6V @ 1Ω: N/A Bridge Power @ 12.6V @ 4Ω: 2 X 600 WRMS Bridge Power @ 12.6V @ 2Ω: N/A Product Dimensions: 7.09 x 5.35 x 2.22 inSale -
SaleSounDigital 2400.4 XP - 4Ω or 2Ω Amplifier
Vendor:SounDigitalSounDigital XP 2400.4 - 4Ω or 2Ω 4-Channel Amplifier The NEW SounDigital XP motorcycle amplifiers are composed of the highest-quality components, allow high-quality sound from your speakers, and are more efficient for your motorcycle or marine speaker system. Using the latest technology, this motorcycle amplifier features a compact design to allow installation in tight areas. This motorcycle amplifier is the perfect addition to any sound system. Garage Bagger Stereo has a large stock of powerful audio amplifiers and other SounDigital products. SounDigital 2400.4 XP Motorcycle Amplifier 2400.4 XP - 2 Ω Power @ 12.6V @ 4Ω: 4 X 262 WRMS Power @ 12.6V @ 2Ω: 4 X 396 WRMS Power @ 12.6V @ 1Ω: 4 X 600 WRMS Bridge Power @ 12.6V @ 4Ω: 2 X 792 WRMS Bridge Power @ 12.6V @ 2Ω: 2 X 1200 WRMS Product Dimensions: 8.99 x 5.35 x 2.22 in 2400.4 XP - 4 Ω Power @ 12.6V @ 4Ω: 4 X 396 WRMS Power @ 12.6V @ 2Ω: 4 X 600 WRMS Power @ 12.6V @ 1Ω: N/A Bridge Power @ 12.6V @ 4Ω: 2 X 1200 WRMS Bridge Power @ 12.6V @ 2Ω: N/A Product Dimensions: 8.99 x 5.35 x 2.22 inSale -
Diamond Audio NEO15006DSP — 1500W RMS 6-Channel Amplifier w/ DSP
Vendor:Diamond AudioThe Diamond Audio NEO15006DSP is a Class D 6-channel amplifier with a built-in 8-channel DSP for multi-speaker motorcycle systems. It is programmable from a PC or Android device.Key Specs Power: 150W RMS x 6 at 4 ohms, 250W RMS x 6 at 2 ohms Bridged: 500W RMS x 3 at 4 ohms DSP: 8 channels, 31-band parametric EQ per channel, crossovers, time delay, channel linking Input sensitivity: 0.4V to 20V Operating voltage: 8V to 17V Dimensions: 11.32" x 4.07" x 1.38"; weight 2.78 lbs Fitment and Installation NotesAt 11.32 inches long, this amplifier may need an oversized amplifier rack or an alternate mounting location on some motorcycles.Related: Motorcycle Amplifiers and Diamond Audio. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
SaleCicada Audio FLX1400.4PRO 1400W 4-Channel DSP Motorcycle Amplifier
Vendor:Cicada AudioThe Cicada Audio FLX1400.4PRO is a 4-channel Class-D motorcycle amplifier with a built-in 6-channel DSP. It is rated at 350 watts RMS per channel at 2 ohms.Key Specs Power at 14.4V: 225W x 4 at 4 ohms, 350W x 4 at 2 ohms Bridged: 700W x 2 at 4 ohms DSP: 6 channels (4 amplified, 2 pass-through) Operating voltage: 9V to 16V; recommended fuse 100A Dimensions with brackets: 8.26 x 4.9 x 2 in Warranty: 2 years Fitment and Installation NotesActual output depends on charging voltage, wiring and speaker impedance, so plan the full system before ordering.Related: Motorcycle Amplifiers and Cicada Audio. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio 24HDNAVTVA2B NAV-TV A2B Harness for 2024-Present Harley
Vendor:Cicada AudioThe Cicada Audio 24HDNAVTVA2B is a plug-and-play harness that connects a NAV-TV ZEN-H A2B interface to Cicada Audio amplifiers on compatible 2024-Present Harley-Davidson models.Related: 2024-Present installation parts, Cicada Audio.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleHertz SPL Show SP 4.500 600W 4-Channel Motorcycle Amplifier
Vendor:HertzHertz SPL Show SP 4.500 600W 4-Channel Motorcycle Amplifier The Hertz SP 4.500 is a sealed 4-channel amplifier for riders who want real power on fairing and saddlebag speakers without a big box. It accepts RCA or speaker-level input, has USS for head units that need to see a speaker load, and runs 4, 3 or 2 channel configurations. Hertz Motorcycle AudioMotorcycle AmplifiersMotorcycle Speakers Hertz 4-Channel Motorcycle Amplifier600W RMS Total in a Sealed IP55 Chassis Built for fairing and lid speakers that need clean power from a small, sealed amplifier. 150W RMS x 4 at 2Ω (14.4V) 300W RMS x 2 bridged at 4Ω (14.4V) HP / LP / Full crossovers, 50Hz–5kHz Start a Build ConsultationCall 864-334-6131 Key Product Details Product Hertz SPL Show SP 4.500 600W 4-Channel Motorcycle Amplifier Amplifier Type 4-channel Class D amplifier, Hertz ADC output stage Best For Fairing speakers, saddlebag lid speakers and midrange pairs in bagger, powersports and marine systems System Goal More clean power on four speakers from a small, sealed amplifier Speaker Support 2Ω minimum in 4-channel mode; 4Ω minimum bridged Inputs Pre-in (RCA) and speaker-level inputs, USS load simulation Install Focus Compact sealed chassis for tight bagger, powersports and boat mounting locations Always verify speaker impedance, wiring layout, fuse size, amplifier placement, gain structure and charging system capacity before ordering or installing this amplifier.Four Channels Built for Outside Fairing and lid speakers on a bagger have to fight wind and engine noise. The SP 4.500 gives you 150 watts RMS per channel at 2 ohms in a chassis rated IP55, with no cooling fan and sealed power, input and speaker connections. Each channel pair gets its own crossover (full, high pass or low pass, 50Hz to 5kHz) so you can high-pass the fairing speakers and set the rear pair independently, or run it in 3-channel or bridged 2-channel modes.Power and Performance Specifications RMS Power @ 4Ω 90 watts x 4 at 14.4V, 1% THD RMS Power @ 2Ω 150 watts x 4 at 14.4V, 1% THD Bridged Power @ 4Ω 300 watts x 2 at 14.4V, 1% THD 3-Channel @ 4Ω 80 watts x 2 (4Ω) + 330 watts x 1 (4Ω) 3-Channel @ 2Ω 145 watts x 2 (2Ω) + 300 watts x 1 (4Ω) Total RMS Power 600 watts Amplifier Class D (Hertz ADC), up to 87% efficiency THD Under 0.02% (100Hz, 4Ω, 70% rated power) Bandwidth 10Hz–35kHz Signal-to-Noise Ratio 100 dBA Damping Factor Over 150 Controls, Inputs and Electrical Crossover Ch 1-2 Full / High Pass / Low Pass, 50Hz–5kHz, 12 dB/octave Crossover Ch 3-4 Full / High Pass / Low Pass, 50Hz–5kHz, 12 dB/octave Bass Boost 45Hz, 0–8 dB on outputs 3-4 (low pass on only) Pre-In Sensitivity 0.6–6 VRMS Speaker-In Sensitivity 2.2–22 VRMS Turn-On Remote in (6–15 VDC) or ART auto turn-on from speaker-level input (3.5–7 VDC, selectable) Power Supply Voltage 11–15 VDC (operating 6–16 VDC) Current Draw 27A at 14.4V, 2Ω, max musical power; idle 0.9A Protection IP55 Operating Temperature 0°C to 55°C Dimensions 192.7 x 130 x 49 mm (7.58 x 5.1 x 1.9 in) Weight 1.9 kg Recommended System Planning Match the SP 4.500 to the speakers first: 2Ω or 4Ω speakers per channel in 4-channel mode, 4Ω when bridged. Run OFC power and ground sized for a 27A draw, fuse at the battery, feed it a clean RCA or speaker-level signal and set the gains with the bike running. If you are unsure whether the SP 4.500 is the right amplifier for your Road Glide, Street Glide, Road King, Indian or custom bagger, contact Garage Bagger Stereo before ordering.What to Pair With the SP 4.500 Speakers and parts that get the most from this amp. Hertz SPL Show SX 165 NEO Coaxial Hertz 6.5-inch NEO coaxial for fairing and Tour-Pak locations. Hertz SPL Show SX 690 H 6x9 3-Way (Pair) Hertz 6x9 for saddlebag lids. Hertz S8 DSP Hertz DSP for time alignment and EQ. Motorcycle Amplifier Installation Parts Power, ground, fusing and RCA parts. Related Hertz & Motorcycle Audio Paths Build the system around the right amplifier, speakers, DSP and wiring. Shop Hertz motorcycle audio amplifiers, speakers and DSP Shop motorcycle amplifiers for Harley bagger audio systems Compare the Hertz SP 4.900 4-channel motorcycle amplifier Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle amplifier installation parts Best Use for the SP 4.500 Choose it to power four fairing and lid speakers, or a speaker pair plus a bridged channel, when space is tight and the amp will see weather. Designed Around Real Motorcycle Audio Wind noise, road speed, speaker placement, electrical load and limited mounting space all matter. This amp belongs in systems where the speakers, wiring, fusing and tuning are matched. Hertz SP 4.500 FAQ How much power does the SP 4.500 produce? At 14.4V and 1% THD Hertz rates it at 90 watts RMS x 4 at 4Ω, 150 watts RMS x 4 at 2Ω, or 300 watts RMS x 2 bridged at 4Ω, for 600 watts RMS total. Can it run in 3-channel mode? Yes. Hertz rates 80 watts x 2 (4Ω) plus 330 watts x 1 (4Ω), or 145 watts x 2 (2Ω) plus 300 watts x 1 (4Ω). Will it work with a factory radio? It has speaker-level inputs (2.2–22 VRMS), USS for head units that need a speaker load, and ART auto turn-on from the speaker signal. How much current does it draw? Hertz lists 27A at 14.4V into 2Ω at max musical power and 0.9A at idle. Is it weatherproof? The aluminum chassis is rated IP55 with sealed power, input and speaker connections and no cooling fan. Does Garage Bagger Stereo install the SP 4.500? Garage Bagger Stereo installs motorcycle audio at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz Audio 1000W SP4.900 Advanced Motorcycle Class D Amplifier
Vendor:HertzThe Hertz SP 4.900 is a compact four-channel Class D amplifier from Hertz, built for powersports use and sold here for motorcycle audio. It uses the Hertz ADC (Advanced D-Class) output stage.Key Specs 160 W RMS x 4 at 4 ohm, or 500 W RMS x 2 at 4 ohm bridged Size 211.6 x 130 mm (8.3 x 5.1 in) Up to 85% efficiency IP55-certified aluminum chassis with no cooling fan Built-in Universal Speakers Simulator (USS) on the high-level inputs Automatic turn-on by remote-in or DC offset sensing on the speaker inputs High-pass and low-pass filters, 50 Hz-5 kHz at 12 dB/oct; bass boost 0-8 dB Fitment and Installation NotesThe USS lets the amp work with OEM head units that mute or shut down on speaker-load detection.Browse more amplifiers and Hertz, or ask about a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleDC Audio PS2400x4 Mini 4-Channel Amplifier
Vendor:DC AudioThe DC Audio PS2400x4 Mini is a compact full bridge 4-channel amplifier rated at 350 watts RMS per channel into 4 ohms and 550 watts RMS per channel into 2 ohms, measured at 14.4V.Key Specs RMS power: 350 W x 4 at 4 ohms RMS power: 550 W x 4 at 2 ohms RMS power: 1,200 W x 2 at 4 ohms (bridged) Stable at 2 ohms stereo and 4 ohms bridged Frequency response: 20 Hz to 30 kHz Adjustable high-pass and low-pass filters, 50 Hz to 500 Hz, 12 dB per octave, with x10 multiplier switches and full-range mode Signal-to-noise ratio: 90 dB; THD at 4 ohms: under 1% Operating voltage: 9 V to 16 V Dimensions (heatsink): 8.26 x 5.23 x 2.3 in (210 x 133 x 60 mm) Browse more motorcycle amplifiers and Harley plug-and-play amplifiers at Garage Bagger Stereo.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale
Plug-and-Play Amplifiers at a Glance
| Brands | Cicada Audio, DS18, DB Drive, SounDigital, Diamond Audio |
| Cicada Audio | FLX700.4, FLX700.4PRO, FLX1000.4, FLX1400.4, FLX1400.4PRO, FLX2000.4 |
| DS18 | ION1000.4D and ION1600.4D four-channel amplifiers |
| DB Drive / SounDigital | Euphoria XPERT EX100.4, EX200.4, EX300.4 and XP 400.4, 800.4, 1200.4, 2400.4 |
| Diamond Audio | NEO10001DSP 1000W RMS monoblock and NEO15006DSP 1500W RMS 6-channel, both with DSP |
Summarized from the products in this collection. Confirm your model, year and amplifier or speaker setup on each product page before ordering.
Plug-and-Play Motorcycle Amplifiers
Already have speakers? These amplifiers are the amp-only way to add power to a Harley-Davidson touring system, with plug-and-play options for the factory harness where the product page lists them.
Most are four-channel amplifiers for the front and rear speakers. Diamond Audio adds a 6-channel DSP amplifier and a DSP monoblock.
Related Shopping
Finish the system.
Plug-and-Play Kits
Plug-and-Play DSP
Motorcycle Amplifiers
Amplifier Parts
Choosing an Amplifier
Match the amplifier to the system:
- Channel count: four channels for two pairs of speakers, six for a larger system
- Power rating against the speakers you are running
- Whether you want built-in DSP, as on the FLX700.4PRO, FLX1400.4PRO and Diamond Audio models
- Impedance, such as 4 ohm only versus 4 ohm or 2 ohm, listed on the SounDigital XP models
Need help matching an amp to your speakers? Call us or request a custom build consultation.
Need Help Choosing Harley Plug-and-Play Amplifiers?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.