
-
Description
-
Reviews
SounDigital 800.4 XP 4-Channel Amplifier, 4Ω, for Motorcycle Audio
The 800.4 XP is a 4Ω 4-channel amplifier measuring 5.72 x 4.44 x 2.00 in, making 4 x 132 watts RMS at 4Ω, 4 x 200 watts at 2Ω or 2 x 400 watts bridged at 4Ω. It is meant for fairing, lid and rear speakers on a motorcycle, with 45Hz-850Hz 12dB/octave filters.
132 watts x 4 in a 5.72 inch chassis
Four channels with bridging and adjustable high-pass and low-pass filters, in a small chassis.
- 4 x 200 watts RMS at 2Ω
- Bridges to 2 x 400 watts RMS at 4Ω
- HPF / LPF 45Hz–850Hz, 12dB/octave
Key Product Details
| Product | SounDigital 800.4 XP 4-Channel Amplifier, 4Ω |
| Amplifier Type | Compact 4-channel amplifier |
| Best For | Fairing, lid and rear speakers, and bridged speaker pairs in motorcycle audio systems |
| Peak Rating | 4 x 200 watts RMS at 2Ω |
| Dimensions (W x L x H) | 5.72" x 4.44" x 2.00" |
Always verify speaker impedance, wiring layout, fuse size, amplifier placement, gain structure, charging system capacity, and final system design before ordering or installing this amplifier.
Efficient Four-Channel Power in a Small Chassis
The 800.4 XP gives upgraded coaxials and component speakers the power they need. SounDigital builds the XP series in a compact design made for tight installation areas.
Run it at 4Ω or 2Ω per channel, or bridge a pair of channels at 4Ω for midbass duty.
Power and Performance Specifications
| RMS Power | 4 x 132 watts @ 4Ω / 4 x 200 watts @ 2Ω |
| Bridged Power | 2 x 400 watts @ 4Ω |
| Frequency Response | 5Hz–34kHz, -3dB |
| Signal-to-Noise Ratio | 91dB |
| Damping Factor | 200 (@100Hz nominal impedance) |
| Crossovers | High-pass and low-pass, 45Hz–850Hz, 12dB/octave |
| Input Sensitivity | 0.2V–2V (RCA) / 1.5V–15V (high level) |
| Operating Voltage | 9V–16V |
| Current Draw | 35A music / 70A max |
| Efficiency | 80% |
| Recommended Fuse | 40A for music use |
| Recommended Minimum Battery | 60Ah |
| Recommended Cable Size | Power 7 AWG / speaker 15 AWG / remote 15 AWG |
| Dimensions (W x L x H) | 5.72" x 4.44" x 2.00" |
| Weight | 2.04 lb |
Recommended System Planning
Match the 800.4 XP to speakers that can handle its power at your final impedance. Use correctly sized OFC power and ground wire, a battery-side fuse, a clean signal input, and a real tuning plan for the crossovers and gains.
If you are unsure whether your charging system can support this amplifier on your bike, contact Garage Bagger Stereo before ordering.
What to Pair With the 800.4 XP
These parts help you wire, load and tune the amplifier correctly.
Amplifier Installation Parts
Power kits, fuses, wiring and mounting parts for motorcycle amplifier installs.
Motorcycle Coaxial Speakers
Fairing and lid speakers to match a 4-channel amplifier.
Motorcycle DSP
Tune the system with a digital sound processor built for Harley-Davidson audio.
SounDigital XP Amplifiers
Add an XP monoblock for the bass.
Related Amplifier & Motorcycle Audio Paths
Build the system around the correct amplifier, speakers, DSP, wiring, and installation parts. These related collections help match the 800.4 XP with the right bagger audio upgrade path.
Best Use for the 800.4 XP
Choose it for compact builds that need clean four-channel power for fairing speakers, saddlebag lids, rear speakers, or bridged pairs.
Designed Around Real Motorcycle Audio
Motorcycle audio is different from car audio. Wind noise, road speed, speaker placement, electrical load, limited mounting space, and heat management all matter. This amplifier belongs in systems where the speakers, wiring, fusing, and tuning plan are matched correctly.
SounDigital 800.4 XP FAQ
How much power does the 800.4 XP make?
It is rated 4 x 132 watts RMS at 4Ω and 4 x 200 watts at 2Ω, or 2 x 400 watts bridged at 4Ω.
Does it have built-in crossovers?
Yes. It has high-pass and low-pass filters adjustable from 45Hz to 850Hz at 12dB per octave.
What fuse and wire does it need?
SounDigital lists a 40A recommended fuse for music use, 7 AWG power cable and 15 AWG speaker cable. Current draw is 35A for music.
How big is it?
It measures 5.72 inches wide by 4.44 inches long by 2.00 inches high and weighs 2.04 lb.
What else do I need to run the 800.4 XP?
Plan for correct fusing, a suitable battery and charging system, speakers matched to the impedance you wire, clean signal input, and a tuning plan such as a DSP. Garage Bagger Stereo can help you match the parts to your bike.
Does Garage Bagger Stereo install the 800.4 XP?
Garage Bagger Stereo offers motorcycle audio installation at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131 to check scheduling.
Need Help Choosing?
Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order.
