Cicada Motorcycle Audio
Shop the full Cicada Audio motorcycle line for Harley-Davidson and Indian: coaxial and component speakers, mid-bass saddlebag kits, FLX amplifiers, subwoofers, grilles, install rings and wiring.
Shopping Cicada speakers for a Harley? Size the fairing first: 5.25" on most 1998-2013 batwings, 6.5" on 2014-2023 and 2024-Present, then 6x9 or 8" in the lids. Many come in 2Ω and 4Ω, so match the load to your amp.
Popular: Cicada plug-and-play kits · CHDLID 2014-2023 cut-in lid kit · 24HDRO 2024-Present rear harness
Cicada Motorcycle Audio
One of the most complete motorcycle audio lines, from speakers to install kits.
- CX, CXX, CHX and CH coaxial speakers
- CMB mid-bass and CXK component kits
- FLX amplifiers
- HDPG power kits and T-harnesses
- Grilles, rings, dividers and templates
Browse Collections
-
Sale2024-Present Harley-Davidson 2-Speaker Plug-and-Play Audio System | Cicada
Vendor:Cicada AudioA high-output front fairing system for compatible 2024-Present and CVO Road Glide and Street Glide: two Cicada Audio CHX65.4PRO 6.5-inch pro coaxial horn speakers, a Cicada FLX1000.4 amplifier configured as two bridged 4-ohm outputs, NAV-TV factory A2B integration, two RCA Y-adapters, the Cicada HDFRBoM bridged-output harness and a Cicada 4-AWG OFC power and ground kit. Speakers: two CHX65.4PRO, 4Ω, 300W RMS / 600W maximum each, 92dB sensitivity Amplifier: FLX1000.4 bridged, up to 530W RMS × 2 at 4Ω and 14.4V Factory signal: NAV-TV Harley-Davidson A2B processor Rear speakers: not included The FLX1000.4 can produce more bridged power than each CHX65.4PRO is rated to handle, so gain, high-pass crossover and output must be set with proper test equipment. Confirm year, model, trim and A2B configuration before ordering: start a build consultation.Sale -
Sale2024-Present Harley-Davidson 2-Speaker Plug-and-Play Audio System | Cicada / SounDigital
Vendor:SounDigitalTwo-speaker system for compatible 2024-Present and CVO Road Glide and Street Glide fairings. It pairs two Cicada Audio CHX65 PRO 6.5-inch pro coaxial horn speakers with a SounDigital XP 800.4 amplifier, a NAV-TV ZEN-H A2B interface and a Cicada Audio OFC power and ground kit. Speakers: Cicada CHX65 PRO, 300W RMS / 600W max per speaker, 92dB sensitivity, external 12dB crossovers with -3/-6dB tweeter attenuation Amplifier: SounDigital XP 800.4, 132W RMS x 4 at 4Ω, 200W RMS x 4 at 2Ω, 400W RMS x 2 bridged at 4Ω Factory signal: NAV-TV ZEN-H A2B interface with eight RCA outputs (no DSP) Rear speakers: not included The amplifier can produce more bridged power than each 4Ω speaker is rated for continuously, so gain and maximum clean output must be set correctly. Confirm year, model, trim, factory radio and A2B configuration before ordering: start a build consultation.Sale -
SaleCicada Audio 14HDXBAG10LID69 2014-2023 Extended Saddlebag System with 6x9" Lid and 10" Bag Cutouts
Vendor:Cicada AudioThe Cicada Audio 14HDXBAG10LID69 is an extended saddlebag system for 2014-2023 Harley-Davidson models with the extended saddlebag design. It has 6x9" cutouts in the lids for speakers and 10" cutouts in the bags for bass drivers and amplifiers. Cicada lists it as a fully assembled system. Fits 2014-2023 H-D models with extended saddlebag design 6x9" lid cutouts, 10" bag cutouts Fully assembled systemSale -
SaleCicada Audio 14HDXBAG10LID8 2014-2023 Extended Saddlebag System with 8" Lid and 10" Bag Cutouts
Vendor:Cicada AudioThe Cicada Audio 14HDXBAG10LID8 is an extended saddlebag system for 2014-2023 Harley-Davidson models with the extended saddlebag design. It has 8" cutouts in the lids for speakers and 10" cutouts in the bags for bass drivers and amplifiers. Cicada lists it as a fully assembled system. Fits 2014-2023 H-D models with extended saddlebag design 8" lid cutouts, 10" bag cutouts Fully assembled systemSale -
SaleCicada Audio CXX4 4" Performance Coaxial Speakers | 2Ω or 4Ω – Pair
Vendor:Cicada AudioCicada Audio CXX4 4-inch performance coaxial speakers with a Kevlar cone, PEI tweeter dome and N45H neodymium magnet. Available in 2Ω or 4Ω, sold as a pair, with a two-year warranty.Sale -
SaleCicada Audio RR2TM 2" Horn Tweeters with Ferrite Motor | 8Ω – Pair
Vendor:Cicada AudioCicada Audio RR2TM 2-inch horn tweeter motors with a ferrite motor, replaceable aluminum diaphragms and included 9kHz passive crossovers. 8Ω, sold as a pair. Pairs with Cicada Acoustic Wave Guides (sold separately).Sale -
SaleCicada Audio RR3TM 3" Horn Tweeters with Neo Motor | 8Ω – Pair
Vendor:Cicada AudioCicada Audio RR3TM 3-inch horn tweeter motors with an N35SH neodymium motor, replaceable aluminum diaphragms and included 9kHz passive crossovers. 8Ω, sold as a pair. Pairs with Cicada Acoustic Wave Guides (sold separately).Sale -
SaleCicada Audio RR3WG-65F 6.5" Flat Acoustic Wave Guide for RR2TM & RR3TM – Pair
Vendor:Cicada AudioCicada Audio RR3WG-65F 6.5-inch flat acoustic wave guide for the RR2TM (2-inch ferrite) and RR3TM (3-inch neo) compression motors. Cicada all-weather composite housing, Nanofram compatible. Sold as a pair; motors sold separately.Sale -
SaleCicada Audio RR3WG-69S 6x9" Shallow Acoustic Wave Guide for RR2TM & RR3TM – Pair
Vendor:Cicada AudioCicada Audio RR3WG-69S 6x9-inch shallow acoustic wave guide for the RR2TM (2-inch ferrite) and RR3TM (3-inch neo) compression motors. Cicada all-weather composite housing, Nanofram compatible. Sold as a pair; motors sold separately.Sale -
SaleCicada Audio RR3WG-69A 6x9" Angled Acoustic Wave Guide for RR2TM & RR3TM – Pair
Vendor:Cicada AudioCicada Audio RR3WG-69A 6x9-inch angled acoustic wave guide for the RR2TM (2-inch ferrite) and RR3TM (3-inch neo) compression motors. Cicada all-weather composite housing, Nanofram compatible. Sold as a pair; motors sold separately.Sale -
SaleCicada Audio RR3WG-69F 6x9" Flat Acoustic Wave Guide for RR2TM & RR3TM – Pair
Vendor:Cicada AudioCicada Audio RR3WG-69F 6x9-inch flat acoustic wave guide for the RR2TM (2-inch ferrite) and RR3TM (3-inch neo) compression motors. Cicada all-weather composite housing, Nanofram compatible. Sold as a pair; motors sold separately.Sale -
SaleCicada Audio RR3WG-8F 8" Flat Acoustic Wave Guide for RR2TM & RR3TM – Pair
Vendor:Cicada AudioCicada Audio RR3WG-8F 8-inch flat acoustic wave guide for the RR2TM (2-inch ferrite) and RR3TM (3-inch neo) compression motors. Cicada all-weather composite housing, Nanofram compatible. Sold as a pair; motors sold separately.Sale
Cicada Motorcycle Audio at a Glance
| Coaxial speakers | CX65, CX69, CXX65, CXX69, CHX65 PRO, CHX69, CHX8 and horn models CH65, CH69W, CH8 |
| Mid-bass | CMB8.S4, CMB10.S4 and CMB10.S4NEO saddlebag kits |
| Components | 14CXK65 (2014-2023) and 24CXK65 (2024-Present) component kits, CXK69 6x9 kit |
| Amplifiers | FLX series four-channel and mono motorcycle amplifiers |
| Wiring | HDPG8K and HDPG4K amp power kits, HDTSLINKAR-B 2014-2023 factory radio T-harness |
Summarized from the products in this collection. Confirm your model and year on each product page before ordering.
Cicada Audio Speakers, Amplifiers and Install Parts for Motorcycles
Cicada builds motorcycle-specific audio, so most parts drop into Harley-Davidson baggers. Start with speakers: the CHX65 PRO 6.5" pro coaxial, CHX69 6x9 pro coaxial and the CX65 cover fairing and bags. Want more output in the bags? The CMB10.S4 10" mid-bass kit and CMB8.S4 8" kit include install rings and templates, and the CXK69 component kit lifts the 6x9 lids. Power it with the FLX700.4 and wire it with the HDPG4K power kit and factory radio T-harness.
Related Shopping
Complete the install.
- Cicada Coaxial Speakers – Pro coaxial range
- Motorcycle Amplifiers – Compare amps
- Motorcycle Subwoofers – Add bass
- 2024-Present 6.5 Speakers – Newest bikes
- Amplifier Parts – Wiring and hardware
Cicada Audio Coaxial Speakers, Mid-Bass Drivers, Amplifiers and Harnesses for Harleys
The CXX69 6x9 inch coaxial is rated 200W RMS / 400W MAX in 2 ohm or 4 ohm, and the CHX69 pro coaxial is rated 400W RMS / 800W MAX each. The CXX57 5x7 inch coaxial is rated 125W RMS / 250W MAX and drops into factory bag lid locations on 1998-2023 Harley-Davidsons. For bass, the CMB8.S4 8 inch is rated 500W RMS / 1000W MAX at 4 ohms and the CMB10.S4 10 inch is rated 800W RMS / 1600W MAX; add the HDPORT3 port kit for saddlebags.
Amplifiers, Racks and Harnesses
The FLX700.4 delivers up to 175 watts x 4 at 2 ohms, while the FLX2000.4 delivers up to 542 watts RMS per channel at 2 ohms at 14.4 volts. Mount amps on the Road Glide rack or Street Glide rack (both 2014-2023), and tie into the factory radio with the HDTSLINKAR-B T-harness for 2014-2023. Compare more motorcycle amplifiers.
Cicada Motorcycle Audio FAQ
What is the difference between Cicada CX, CXX, CH and CHX speakers?
Cicada sorts its coaxials into four lines: CX is Coax, CXX is Pro Coax, CH is Coax Horn and CHX is Pro Coax Horn. The horn lines put a horn-loaded tweeter in the center for more projection over wind noise. Most models come in 2-ohm versions (ending in .2) and 4-ohm versions (ending in .4), so match the impedance to how your amplifier will run them.
Will Cicada 6.5-inch speakers fit my factory fairing locations?
Cicada designs its CHX 6.5-inch Pro Coax Horn for all 2014-2023 and 2024-present Harley factory locations, with a 67 mm (2.6-inch) mounting depth. Road Glide and Street Glide grilles are sold separately for each fairing. Saddlebag 6x9 and 8-inch speakers need a lid kit, such as the Cicada CHDLID for 2014-2023 or the 24CHDLID for 2024-present.
How do I add a Cicada amplifier to a 2014-2023 factory radio?
Use the Cicada HDTSLINKAR-B factory radio T-harness, which plugs in to pull the speaker signal for the amp without splicing factory wiring. It carries signal only, so add a power kit such as the HDPG4K or HDPG8K. The HDFLXFO harness handles the front fairing speakers, and the HDFLXRO covers the rear saddlebag or Tour-Pak speaker run.
Does Cicada make complete systems for 2024-present Harleys?
Yes. Cicada's 24FLX systems are built per model, RG for Road Glide and SG for Street Glide, in 2-speaker, 4-speaker and 8-speaker layouts on FLX amplifiers, including DSP versions. For rear speakers on 2024-present bikes, the 24HDRO harness connects the factory rear speaker output to an aftermarket system. Compare all of them in our 2024-present plug-and-play kits collection.
Need Help Choosing Cicada Motorcycle Audio?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.
Cicada Harley Speaker Kits by Year: What's Year-Specific and What Isn't
Cicada speakers don't care what year your bike is. A CHX65 is a 6.5" pro coaxial whether it lands in a 2009 batwing or a 2025 Road Glide. The year lives in the parts around the speaker: grilles, harnesses, amp racks and lid kits. Get those right and the speaker drops in.
- 1998-2013: pick Cicada speakers by the size of your fairing and lid openings, then plan how the amp gets its signal. Call us before you order hardware for these bikes.
- 2014-2023: the HDTSLINKAR-B T-harness ties an amp into the factory radio, the 14CXK65 component kit fills the fairing, the CHDLID kit cuts speakers into the lids, and CHDSGG grilles finish a Street Glide.
- Road Glide 2015-2023: CHDRGG grilles up front and the 14HDAR-RG rack for the amp.
- 2024-Present: the 24CXK65 component kit, the 24HDRO rear output harness and 24CHDRGGT-075 Road Glide grilles with RR075T mounts.
Road King riders: there's no fairing, so there are no fairing grilles. Your Cicada build lives in the bags, the lowers or the tour pack.
Cicada Amps and DSP: Power Cicada Motorcycle Speakers Right
Pro coaxials and mid-bass want real power, not what a factory radio puts out. Cicada's FLX amps are four-channel: two channels for the fairing, two for the lids. Shop them all in Cicada motorcycle amplifiers and size the amp to the speakers you're actually running.
Wiring is where builds go wrong. The HDPG4K 4 AWG kit feeds the amp, the HDFLXFO harness runs the front fairing speakers, and the HDFLXRO harness runs the saddlebags or tour pack. If you want to tune it properly, the DSP412PRO 12-channel motorcycle DSP is where the tune gets dialed in.
One rule we don't bend: a mono amp is never plug and play. Adding a mono amp for bass means its own power run, a signal source and a tune. Budget the install time for it.
Installing Cicada 6.5 Motorcycle Speakers: Depth, Dividers and Ports
Most Cicada 6.5 install headaches come from depth, not diameter. Cicada's SPACER65-0.5 adds 1/2" of depth and works with every Cicada 6.5" speaker. The SPACER65-0.75 adds 3/4". Shim the speaker out before you start trimming fairing plastic.
In the bags, the CHD69HD (plastic) and CHD69SD (silicone) dividers give a 6x9 lid speaker its own space. Running CMB8.S4 or CMB10.S4 mid-bass in the bags? Cicada lists the HDPORT3 3" right-angled aero port kit as compatible with all its mid-bass drivers and woofers.
Check grille clearance, magnet depth and the wire path before you cut anything. Or book the build in Taylors, SC and we'll handle it.
More Cicada Motorcycle Audio Questions
Are Cicada speakers year-specific for my Harley?
No. Cicada speakers are sold by size and type, not by model year. The year-specific parts are the grilles, harnesses, amp racks and lid kits: 2014-2023, Road Glide 2015-2023, and 2024-Present each have their own.
What does the Cicada 24HDRO harness do?
Cicada says the 24HDRO connects the rear speaker output to an aftermarket audio system on 2024 and newer Harley-Davidson models. It is plug and play with factory-style connectors, so there's no cutting or splicing.
Do I need spacer rings for Cicada 6.5 speakers?
Only if your location is short on depth. The SPACER65-0.5 adds 1/2 inch and the SPACER65-0.75 adds 3/4 inch, and Cicada says the 0.5 fits every Cicada 6.5 inch speaker. Measure the depth behind the grille before you order.
Is a Cicada mono amplifier plug and play?
No. A mono amp is never plug and play. It needs its own power and ground run, a signal source and tuning, so plan for that install time.