Cicada Motorcycle Audio
Shop the full Cicada Audio motorcycle line for Harley-Davidson and Indian: coaxial and component speakers, mid-bass saddlebag kits, FLX amplifiers, subwoofers, grilles, install rings and wiring.
Shopping Cicada speakers for a Harley? Size the fairing first: 5.25" on most 1998-2013 batwings, 6.5" on 2014-2023 and 2024-Present, then 6x9 or 8" in the lids. Many come in 2Ω and 4Ω, so match the load to your amp.
Popular: Cicada plug-and-play kits · CHDLID 2014-2023 cut-in lid kit · 24HDRO 2024-Present rear harness
THE REFERENCE STANDARD
Cicada Motorcycle Audio
One of the most complete motorcycle audio lines, from speakers to install kits.
- CX, CXX, CHX and CH coaxial speakers
- CMB mid-bass and CXK component kits
- FLX amplifiers
- HDPG power kits and T-harnesses
- Grilles, rings, dividers and templates
Browse Collections
-
SaleCicada Audio 24HDAR-SG Amplifier Rack for 2024-Present Street Glide
Vendor:Cicada AudioThe Cicada Audio 24HDAR-SG is an aluminum amplifier mounting rack for the 2024-Present Harley-Davidson Street Glide. It lets an FLX-style amplifier mount at the factory amplifier locations without custom bracketing.Key Specs Fits 2024-Present Harley-Davidson Street Glide Aluminum construction, black anodized finish Predrilled holes for mounting the amplifier to the rack Mounting hardware included Designed for all Cicada FLX-style amplifiers Fitment and Installation NotesThe rack mounts at the OEM amplifier mounting locations, then the amplifier bolts to the rack through the predrilled holes.Related: amplifier parts, 2024 amplifiers, Cicada Audio.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
Sale1998-2013 Harley-Davidson Plug and Play Audio System | Cicada Audio
Vendor:Cicada AudioThis Cicada Audio plug and play audio system is built for 1998-2013 Harley-Davidson Road Glide and Street Glide models. It bundles a Cicada Audio FLX700.4 amplifier and Cicada CHX65.4PRO 6.5" speakers with a bike-specific amplifier rack and radio-specific wiring.Key Specs Fitment: 1998-2013 Harley-Davidson Road Glide and Street Glide Amplifier: Cicada Audio FLX700.4 Speakers: Cicada CHX65.4PRO 6.5" Bike-specific amplifier rack included Wiring options for a stock Harley radio or an aftermarket radio Fitment and Installation NotesChoose the bike model (Road Glide or Street Glide) and radio type before ordering, since the parts and wiring are specific to each.Related: Plug and Play Kits and Cicada Audio. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio FLX1400.4PRO 1400W 4-Channel DSP Motorcycle Amplifier
Vendor:Cicada AudioThe Cicada Audio FLX1400.4PRO is a 4-channel Class-D motorcycle amplifier with a built-in 6-channel DSP. It is rated at 350 watts RMS per channel at 2 ohms.Key Specs Power at 14.4V: 225W x 4 at 4 ohms, 350W x 4 at 2 ohms Bridged: 700W x 2 at 4 ohms DSP: 6 channels (4 amplified, 2 pass-through) Operating voltage: 9V to 16V; recommended fuse 100A Dimensions with brackets: 8.26 x 4.9 x 2 in Warranty: 2 years Fitment and Installation NotesActual output depends on charging voltage, wiring and speaker impedance, so plan the full system before ordering.Related: Motorcycle Amplifiers and Cicada Audio. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio 10" Midbass Kit Complete - 1998-Present Harley Davidson
Vendor:Cicada AudioThe Cicada Audio 10" Midbass Kit is a complete dual-10" saddlebag package for 1998-Present Harley-Davidson Touring models. It includes the amplifier and the support hardware for the install.Key Specs Configuration: dual 10" shallow midbass Amplifier: Cicada Audio FLX1600.1 mono Nagy's Customs 10" adapter rings, sealed topper pair and saddlebag braces Cicada Audio port kit (year specific) Two DB Drive DBLHDH1 quick-disconnect speaker wire harnesses Fitment and Installation NotesVerify saddlebag clearance, driver depth, adapter ring fitment and port placement before cutting or drilling.Related: Cicada Audio and Midrange Speakers. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
Cicada Audio CHX69.4 6x9 Speakers 4Ω – Open Box
Vendor:Cicada AudioOpen Box Item Cicada Audio CHX69-4 4Ω 6x9 speaker. This open box unit has been inspected and tested to ensure full functionality. Fully tested and functional May show minor cosmetic wear Original packaging and accessories may be missing or show wear May have been installed and played for demo purposes only -
Cicada Audio BDA1600.1D 1Ω Monoblock Amplifier – Open Box
Vendor:Cicada AudioOpen Box Item Cicada Audio BDA1600.1D 1Ω monoblock amplifier. This open box unit has been inspected and tested to ensure full functionality. Fully tested and functional May show minor cosmetic wear Original packaging and accessories may be missing or show wear -
SaleHarley Davidson Street Glide Components 2024-Present
Vendor:Cicada AudioCicada Audio 6.5" Mid-Bass 2-Way Component Speaker Kit Built for 2024-Present Street Glide Fairing Only Free shipping, use code ShipOne at checkout FEATURES: Designed for 2024-Present factory-designed locations Brock Black Designs 3D printed and black painted grills Rain or Shine™ all-weather performance design speakers OFC Copper shorting ring for extended high-frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, robust, and high temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die-cast Aluminum custom-tooled basket with Vortex Flow Venting™ Two (2) year warranty on 6.5 and compression driversTen0 business day lead time Grills are painted black Some assembly is required (nuts and bolts) Designed for use with aftermarket amplifiers It will work with stock amplifiers; however internal pod wiring may need to be slightly modified SPECIFICATIONS: 2Ω – 6.5-inch mid-bass driver Power handling: 250W RMS/500W MAX Voice Coils: 2.0-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94dB, 1W / 1M response 70Hz – 20kHz +/- 3dB Mounting Depth: 2.64-inch/67mm Mounting Diameter: 5.67-inch/144mm 4Ω – 1.0-inch shallow ring radiator horn tweeter Power handling: 200W RMS/400W MAX Voice Coils: 1.0-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12dB-7kHz external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Magnet: Neodymium Sensitivity: 107dB, 1W / 1M response 2kHz – 20kHz +/- 3dB Mounting Depth: 0.75-inch/18mm Mounting Diameter: 2.0-inch/50mmSale -
Sale2024-Present Street Glide 2-Speaker DSP Audio System | Cicada
Vendor:Cicada Audio2023 CVO / 2024-Present STREET GLIDE AUDIO 2023 CVO / 2024-Present Street Glide 2-Speaker DSP Audio System | Cicada Upgrade a compatible late-model Harley-Davidson Street Glide with a complete front component audio system built around Cicada Audio 24CXK65.2SG speakers, the current FLX1400.4PRO four-channel DSP amplifier, NAV-TV factory A2B integration and motorcycle-ready 4-AWG power wiring. The system places two high-output 6.5-inch mid-bass drivers and two shallow horn tweeters in the Street Glide fairing. The amplifier’s integrated six-channel DSP provides crossover control, equalization, output management and future system-expansion capability. See Everything Included View Component Layout Complete Street Glide Fairing System Street Glide-specific component speaker system Cicada 24CXK65.2SG component kit Two 2-ohm 6.5-inch mid-bass drivers Two 4-ohm shallow horn tweeters External 12dB passive crossovers FLX1400.4PRO four-channel DSP amplifier 350 watts RMS × 4 at 2 ohms Six DSP channels: four amplified and two pass-through Bluetooth audio streaming USB-C computer-based DSP tuning DIALD app-compatible configuration NAV-TV ZEN-H factory A2B integration Cicada HDPG4K 4-AWG power kit Complete Street Glide DSP Audio System This Garage Bagger Stereo package combines a Street Glide-specific Cicada component speaker system, a high-power DSP amplifier, factory A2B integration and heavy-gauge amplifier wiring into one complete front-fairing audio upgrade. The 24CXK65.2SG uses two 2-ohm mid-bass drivers for strong vocal and mid-bass output. Two separate shallow ring-radiator horn tweeters provide high-frequency projection from compatible Street Glide factory-designed locations. The FLX1400.4PRO supplies four amplified DSP channels plus two DSP-controlled pass-through channels. Two amplified channels operate the front component system, leaving two amplified channels and two pass-through outputs available for a properly designed future expansion. Component-system clarification: This is described as a two-speaker system because it uses two primary 6.5-inch fairing speaker positions. The complete component system contains four individual drivers: two mid-bass speakers and two tweeters. Street Glide Fitment 2023 CVO Street Glide Verify the exact motorcycle, fairing, factory radio, factory amplifier and A2B configuration before ordering for a late-production CVO Street Glide. 2024-Present Street Glide The 24CXK65.2SG component speaker kit is designed around compatible redesigned 2024-Present Street Glide factory speaker locations. Street Glide configuration: This system uses the Street Glide-specific 24CXK65.2SG component kit. It is not the Road Glide speaker configuration. Confirm the exact year, model and trim before ordering. Everything Included in the Audio System Cicada 24CXK65.2SG Component Kit One Street Glide-specific component speaker package with two 2-ohm 6.5-inch mid-bass drivers and two 4-ohm shallow horn tweeters. External Passive Crossovers Two custom 12dB crossover networks filter and protect the shallow horn tweeters at the manufacturer-specified crossover frequency. Tweeter Attenuation Resistors Resistor options allow the high-frequency output to be reduced by 3dB or 6dB when required by the installation and final tuning. Cicada FLX1400.4PRO DSP Amplifier One current-generation four-channel Class-D amplifier with six DSP channels, Bluetooth streaming, USB-C tuning and DIALD software support. NAV-TV ZEN-H A2B Interface Factory A2B interface that converts the compatible Harley-Davidson digital audio signal into analog RCA outputs for the Cicada amplifier. Cicada HDPG4K Power Kit 4-AWG power and ground wiring with battery terminals, amplifier ferrules, remote wiring and waterproof Mini-ANL fuse protection. Confirm package hardware: Verify the Street Glide amplifier rack, A2B-to-amplifier harness, speaker-output wiring and required mounting hardware included with the active Shopify bundle. Front Component Speaker Layout Left Fairing Position One 2-ohm 6.5-inch mid-bass driver One 4-ohm shallow horn tweeter One external passive crossover One dedicated amplified DSP channel Right Fairing Position One 2-ohm 6.5-inch mid-bass driver One 4-ohm shallow horn tweeter One external passive crossover One dedicated amplified DSP channel Primary Speaker Positions Two Street Glide fairing locations Mid-Bass Drivers Two 2Ω 6.5-inch drivers Tweeters Two 4Ω shallow horn tweeters Total Individual Drivers Four Amplified Front Channels Two Available Amplified Channels Two Available DSP Pass-Through Channels Two Component wiring: Install each mid-bass driver, tweeter and passive crossover according to the supplied Cicada component speaker instructions. Do not connect either tweeter directly to an unfiltered amplifier output. Cicada 24CXK65.2SG Component Speaker Kit The 24CXK65.2SG is engineered for compatible 2024-Present Street Glide factory-designed speaker locations. Carbon Matrix Composite cones, neodymium motors and aluminum shallow horn tweeters provide high-output performance in a compact motorcycle-ready package. 250W RMS Mid-Bass Each 6.5-inch mid-bass driver handles 250 watts RMS. 200W RMS Tweeters Each tweeter handles 200 watts RMS through the correct crossover. Street Glide Fitment Designed around compatible late-model Street Glide locations. Carbon Matrix Cones Lightweight cone construction supports efficient projection. Neodymium Motors Compact high-strength motors reduce weight while maintaining output. Rain or Shine Design All-weather materials support exposed fairing installations. Component Kit 24CXK65.2SG Application Compatible 2024-Present Harley-Davidson Street Glide Mid-Bass Size 6.5 inches Mid-Bass Impedance 2Ω per driver Mid-Bass Power 250W RMS / 500W maximum per driver Mid-Bass Voice Coil 2 inches / 51mm Mid-Bass Cone Carbon Matrix Composite Mid-Bass Magnet N35SH neodymium Mid-Bass Sensitivity 94dB, 1W / 1m Mid-Bass Response 70Hz–20kHz ±3dB Mid-Bass Mounting Depth 2.64 inches / 67mm Mid-Bass Mounting Diameter 5.67 inches / 144mm Tweeter Size One inch Tweeter Impedance 4Ω per tweeter Tweeter Power 200W RMS / 400W maximum per tweeter Tweeter Diaphragm Aluminum Tweeter Sensitivity 107dB, 1W / 1m Tweeter Response 2kHz–20kHz ±3dB Passive Crossover External 12dB crossover at 7kHz Tweeter Attenuation Optional -3dB and -6dB resistor settings Warranty Two years through Cicada Audio Cicada FLX1400.4PRO 350W × 4-Channel DSP Amplifier The FLX1400.4PRO combines four high-power amplified channels with six-channel DSP processing. Four DSP channels feed the built-in amplifier outputs, while two additional DSP channels provide pass-through outputs for future equipment. 225W × 4 at 4Ω Four-channel output at 14.4 volts into 4-ohm loads. 350W × 4 at 2Ω Four-channel output for compatible 2-ohm speaker channels. 700W × 2 Bridged Bridged output into compatible 4-ohm loads. Six-Channel DSP Four amplified DSP channels plus two pass-through channels. Bluetooth Streaming Stream audio directly through the amplifier’s Bluetooth input. USB-C Tuning Connect a computer for detailed DIALD DSP configuration. Amplifier Model Cicada Audio FLX1400.4PRO Amplifier Type Four-channel Class-D amplifier with six-channel DSP DSP Architecture Four amplified channels and two pass-through channels Output at 4Ω / 14.4V 225W RMS × 4 Output at 2Ω / 14.4V 350W RMS × 4 Bridged Output at 4Ω / 14.4V 700W RMS × 2 Frequency Response 20Hz–20kHz ±3dB THD + Noise 0.1% at 2Ω per channel and 10% rated power Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Efficiency 80% DSP Crossover Modes High-pass / band-pass / low-pass DSP Crossover Range 20Hz–20kHz DSP Crossover Slopes 6, 12, 24 or 48dB per octave Input Sensitivity 12V–0.2V Bluetooth Audio Included Computer Connection USB-C DSP Software DIALD PC and app-based configuration iOS App Compatibility Yes Operating Voltage 9V–16V Music Current Draw 70A Maximum Current Draw 150A Recommended Fuse 100A Turn-On Options Remote / DC / VOX Power Input 4-AWG Speaker Outputs 12-AWG busbar-style connections Dimensions With Brackets 8.26 × 4.9 × 2 inches / 210 × 125 × 51mm Chassis Dimensions 7.1 × 4.9 × 2 inches / 180 × 125 × 51mm Warranty Two years through Cicada Audio Speaker protection required: The amplifier produces more continuous power at 2 ohms than each included mid-bass driver is rated to handle. Use correct high-pass filtering, gain structure and DSP output limiting. NAV-TV ZEN-H Factory A2B Integration The ZEN-H allows the compatible factory Harley-Davidson radio to feed the Cicada DSP amplifier without replacing the factory infotainment system. Eight RCA Outputs Provides eight low-level analog channels for aftermarket equipment. Up to 5V RMS Supplies a strong preamplifier signal to the Cicada amplifier. Factory Control Retention Retains supported volume, balance, fader, chimes and EQ presets. DSP clarification: The standard ZEN-H provides A2B signal conversion. The FLX1400.4PRO supplies the system’s DSP processing, Bluetooth streaming and tuning functions. Power Wiring and Fuse Protection The Cicada HDPG4K supplies the heavy-gauge power and ground foundation required for the FLX1400.4PRO installation. Power Kit Cicada Audio HDPG4K Power Cable Six-foot 4-AWG cable with protective over-braid Ground Cable Six-foot 4-AWG cable with protective over-braid Battery Connections Preinstalled ring terminals Amplifier Connections Preinstalled ferrules Remote Trigger Remote wire with Harley-Davidson plug Fuse Holder Waterproof Mini-ANL Supplied Fuse Options 60A, 80A and 100A Amplifier Recommended Fuse 100A Fuse selection: Confirm that the complete wiring, holder, terminals and supplied 100-amp fuse comply with current Cicada guidance before powering the FLX1400.4PRO. DSP Setup and Component Protection Install both passive tweeter crossovers correctly. Do not connect either tweeter directly to unfiltered amplifier output. Configure protective high-pass filtering for both front channels. Set gain using measured clean output rather than by ear. Use DSP output limiting to protect the mid-bass drivers. Use equalization to correct fairing-specific response issues. Use time alignment to improve left-to-right arrival timing. Confirm tweeter polarity and attenuation before final assembly. Reduce output immediately if distortion or mechanical noise occurs. Professional tuning recommended: Final crossover, equalization, time alignment, gain and limiting settings depend on the motorcycle, installation and intended listening level. Installation Instructions and Resources Speaker Installation Cicada Speaker and Crossover Reference Speaker Polarity Check Street Glide and A2B Installation Street Glide Fairing Removal Late-Model Harley T-Harness Installation Motorcycle Amplifier Installation Parts Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Complete System Specifications System Type Two-position Street Glide component system with DSP amplifier Primary Applications Compatible 2023 CVO Street Glide and 2024-Present Street Glide Component Speaker Kit Cicada Audio 24CXK65.2SG Mid-Bass Drivers Two 6.5-inch 2Ω drivers Tweeters Two one-inch 4Ω shallow horn tweeters Total Individual Drivers Four Amplifier Cicada Audio FLX1400.4PRO Amplifier Output at 2Ω 350W RMS × 4 at 14.4V DSP Channels Six total: four amplified and two pass-through Amplified Front Channels Used Two Available Amplified Channels Two Available DSP Pass-Through Channels Two Factory Signal Integration NAV-TV ZEN-H A2B interface Power Wiring Cicada Audio HDPG4K 4-AWG installation kit Built-In Amplifier DSP Yes Bluetooth Audio Streaming Yes USB-C DSP Tuning Yes Rear Speakers Included No Shopify Variants None Fitment and Ordering Notes Submit complete motorcycle information: Confirm the motorcycle year, exact Street Glide model, trim, factory radio, factory amplifier, A2B configuration and current audio modifications. This product is configured for compatible Street Glide motorcycles. The speaker kit uses two 2-ohm mid-bass drivers. The speaker kit uses two 4-ohm shallow horn tweeters. Both passive crossover networks must be used. Two amplifier channels operate the front component system. Two amplified DSP channels remain available for expansion. Two additional DSP pass-through channels are available. Rear speakers and rear mounting components are not included. Verify speaker depth, grille clearance and crossover placement. Verify amplifier mounting space and rack compatibility. Correct DSP setup and output limiting are required. Professional installation and tuning are strongly recommended. Current Shipping Promotion Enter code ShipOne at checkout for eligible free shipping. Current checkout eligibility and product exclusions apply. Related Motorcycle Audio Categories Street Glide and Cicada Audio 2023 CVO / 2024-present Harley Plug-and-Play Kits Shop Cicada Audio Shop Motorcycle Speakers Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Street Glide DSP Audio System FAQ Which component speaker kit is included? The system includes the Street Glide-specific Cicada Audio 24CXK65.2SG component speaker kit. Which amplifier is included? The system includes the current Cicada Audio FLX1400.4PRO 350-watt × four-channel DSP amplifier. Is this the discontinued FLX1400.4P? No. This updated package uses the current FLX1400.4PRO amplifier. How many speakers are included? The system uses two primary fairing positions and contains two mid-bass drivers and two separate tweeters. What impedance are the mid-bass drivers? Each 6.5-inch mid-bass driver has a nominal impedance of 2 ohms. What impedance are the tweeters? Each shallow horn tweeter has a nominal impedance of 4 ohms. Are passive tweeter crossovers included? Yes. The component kit includes external 12dB crossover networks and tweeter-attenuation resistor options. How much power does the amplifier produce at 2 ohms? The FLX1400.4PRO produces 350 watts RMS per channel at 2 ohms and 14.4 volts. How many DSP channels does the amplifier provide? It provides six DSP channels: four amplified outputs and two pass-through outputs. Does the amplifier support Bluetooth audio? Yes. Bluetooth audio streaming is built into the FLX1400.4PRO. How is the DSP configured? The amplifier supports USB-C computer tuning and DIALD app-based configuration. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley-Davidson A2B signal into analog RCA outputs for the Cicada amplifier. Does the ZEN-H provide the system DSP? No. The standard ZEN-H performs A2B signal conversion. The FLX1400.4PRO provides the system’s DSP processing. Are all four amplified channels used? No. Two channels operate the front component system, leaving two amplified channels available for properly matched expansion. Are rear speakers included? No. Rear speakers, rear wiring and rear mounting components must be added separately. Is professional tuning recommended? Yes. Proper crossover, equalization, limiting and gain configuration are essential because the amplifier has more available output than the included mid-bass drivers require. Need Help Matching This Street Glide Audio System? Garage Bagger Stereo can help verify Street Glide fitment, component impedance selection, amplifier matching, fairing speaker and amplifier mounting, power and speaker wiring, passive crossover placement and factory A2B signal integration before installation. Installation Services Request a Custom BuildSale -
Sale2024-Present Road Glide 2-Speaker DSP Audio System | Cicada
Vendor:Cicada Audio2023 CVO / 2024-Present ROAD GLIDE AUDIO 2023 CVO / 2024-Present Road Glide 2-Speaker DSP Audio System | Cicada Upgrade a compatible late-model Harley-Davidson Road Glide with a complete front component audio system built around Cicada Audio 24CXK65.2RG speakers, the current FLX1400.4PRO four-channel DSP amplifier, NAV-TV factory A2B integration and motorcycle-ready 4-AWG power wiring. The system places two high-output 6.5-inch mid-bass drivers and two shallow horn tweeters in the Road Glide fairing. The amplifier’s integrated six-channel DSP provides crossover control, equalization, output management and system-expansion capability. See Everything Included View Component Layout Complete Road Glide Fairing System Road Glide-specific component speaker system Cicada 24CXK65.2RG component kit Two 2-ohm 6.5-inch mid-bass drivers Two 4-ohm shallow horn tweeters External 12dB passive crossovers FLX1400.4PRO four-channel DSP amplifier 350 watts RMS × 4 at 2 ohms Six DSP channels: four amplified and two pass-through Bluetooth audio streaming USB-C computer-based DSP tuning DIALD app-compatible configuration NAV-TV ZEN-H factory A2B integration Cicada HDPG4K 4-AWG power kit Complete Road Glide DSP Audio System This Garage Bagger Stereo package combines a Road Glide-specific Cicada component speaker system, a high-power DSP amplifier, factory A2B integration and heavy-gauge amplifier wiring into one complete front-fairing audio upgrade. The 24CXK65.2RG uses two 2-ohm mid-bass drivers for strong vocal and mid-bass output. Two separate shallow ring-radiator horn tweeters provide high-frequency projection through Road Glide-specific locations. The current FLX1400.4PRO supplies four amplified DSP channels plus two DSP-controlled pass-through channels. Two amplified channels operate the front component system, leaving two amplified channels and two pass-through outputs available for properly designed expansion. Component-system clarification: This is described as a two-speaker system because it uses two primary 6.5-inch fairing speaker positions. The complete component system contains four individual drivers: two mid-bass speakers and two tweeters. Road Glide Fitment 2023 CVO Road Glide Verify the exact motorcycle, fairing, factory radio, factory amplifier and A2B configuration before ordering for a late-production CVO Road Glide. 2024-Present Road Glide The 24CXK65.2RG speaker package is designed around compatible redesigned 2024-Present Road Glide factory speaker locations. Road Glide configuration: This system uses the Road Glide-specific 24CXK65.2RG component kit. It is not the Street Glide speaker configuration. Confirm the exact year, model and trim before ordering. Everything Included in the Audio System Cicada 24CXK65.2RG Component Kit One Road Glide-specific component speaker package with two 2-ohm 6.5-inch mid-bass drivers and two 4-ohm shallow horn tweeters. External Passive Crossovers Two custom 12dB crossover networks filter and protect the shallow horn tweeters. Tweeter Attenuation Resistors Resistor options allow the high-frequency output to be reduced by 3dB or 6dB when required by the installation and final tuning. Cicada FLX1400.4PRO DSP Amplifier One current-generation four-channel Class-D amplifier with six DSP channels, Bluetooth streaming, USB-C tuning and DIALD software support. NAV-TV ZEN-H A2B Interface Factory A2B interface that converts the compatible Harley-Davidson digital audio signal into analog outputs for the Cicada amplifier. Cicada HDPG4K Power Kit 4-AWG power and ground wiring with battery terminals, amplifier ferrules, remote wiring and waterproof Mini-ANL fuse protection. Confirm package hardware: Verify the Road Glide amplifier rack, A2B-to-amplifier harness, speaker-output wiring and required mounting hardware included with the active Shopify bundle. Front Component Speaker Layout Left Fairing Position One 2-ohm 6.5-inch mid-bass driver One 4-ohm shallow horn tweeter One external passive crossover One dedicated amplified DSP channel Right Fairing Position One 2-ohm 6.5-inch mid-bass driver One 4-ohm shallow horn tweeter One external passive crossover One dedicated amplified DSP channel Primary Speaker Positions Two Road Glide fairing locations Mid-Bass Drivers Two 2Ω 6.5-inch drivers Tweeters Two 4Ω shallow horn tweeters Total Individual Drivers Four Amplified Front Channels Two Available Amplified Channels Two Available DSP Pass-Through Channels Two Component wiring: Install each mid-bass driver, tweeter and passive crossover according to the supplied Cicada component speaker instructions. Do not connect either tweeter directly to an unfiltered amplifier output. Cicada 24CXK65.2RG Component Speaker Kit The 24CXK65.2RG is engineered for compatible 2024-Present Road Glide factory speaker locations. Carbon Matrix Composite cones, neodymium motors and aluminum shallow horn tweeters provide high-output performance in a compact motorcycle-ready package. 250W RMS Mid-Bass Each 6.5-inch mid-bass driver handles 250 watts RMS. 200W RMS Tweeters Each tweeter handles 200 watts RMS through the correct crossover. Road Glide Fitment Designed around compatible late-model Road Glide locations. Carbon Matrix Cones Lightweight cone construction supports efficient projection. Neodymium Motors Compact high-strength motors reduce weight while maintaining output. All-Weather Design Motorcycle-ready materials support fairing installation. Component Kit 24CXK65.2RG Application Compatible 2024-Present Harley-Davidson Road Glide Mid-Bass Size 6.5 inches Mid-Bass Impedance 2Ω per driver Mid-Bass Power 250W RMS / 500W maximum per driver Mid-Bass Voice Coil 2 inches / 51mm Mid-Bass Cone Carbon Matrix Composite Mid-Bass Sensitivity 94dB, 1W / 1m Mid-Bass Response 70Hz–20kHz ±3dB Mid-Bass Mounting Depth 2.64 inches / 67mm Mid-Bass Mounting Diameter 5.67 inches / 144mm Tweeter Size One inch Tweeter Impedance 4Ω per tweeter Tweeter Power 200W RMS / 400W maximum per tweeter Tweeter Diaphragm Aluminum Tweeter Sensitivity 107dB, 1W / 1m Tweeter Response 2kHz–20kHz ±3dB Passive Crossover External 12dB crossover at 7kHz Tweeter Attenuation Optional -3dB and -6dB resistor settings Cicada FLX1400.4PRO 350W × 4-Channel DSP Amplifier The current FLX1400.4PRO combines four high-power amplified channels with six-channel DSP processing. Four DSP channels feed the built-in amplifier outputs, while two additional DSP channels provide pass-through outputs for future equipment. 225W × 4 at 4Ω Four-channel output at 14.4 volts into 4-ohm loads. 350W × 4 at 2Ω Four-channel output for the included 2-ohm mid-bass system. 700W × 2 Bridged Bridged output into compatible 4-ohm loads. Six-Channel DSP Four amplified DSP channels plus two pass-through channels. Bluetooth Streaming Stream audio directly through the amplifier’s Bluetooth input. USB-C Tuning Connect a computer for detailed DIALD DSP configuration. Amplifier Model Cicada Audio FLX1400.4PRO Amplifier Type Four-channel Class-D amplifier with six-channel DSP DSP Architecture Four amplified channels and two pass-through channels Output at 4Ω / 14.4V 225W RMS × 4 Output at 2Ω / 14.4V 350W RMS × 4 Bridged Output at 4Ω / 14.4V 700W RMS × 2 Frequency Response 20Hz–20kHz ±3dB THD + Noise 0.1% at 2Ω per channel and 10% rated power Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Efficiency 80% DSP Crossover Modes High-pass / band-pass / low-pass DSP Crossover Range 20Hz–20kHz DSP Crossover Slopes 6, 12, 24 or 48dB per octave Input Sensitivity 12V–0.2V Bluetooth Audio Included Computer Connection USB-C DSP Software DIALD PC and app-based configuration iOS App Compatibility Yes Operating Voltage 9V–16V Music Current Draw 70A Maximum Current Draw 150A Recommended Fuse 100A Turn-On Options Remote / DC / VOX Power Input 4-AWG Speaker Outputs 12-AWG busbar-style connections Dimensions With Brackets 8.26 × 4.9 × 2 inches / 210 × 125 × 51mm Chassis Dimensions 7.1 × 4.9 × 2 inches / 180 × 125 × 51mm Warranty Two years through Cicada Audio Speaker protection required: The amplifier produces more continuous power at 2 ohms than each included mid-bass driver is rated to handle. Use correct high-pass filtering, gain structure and DSP output limiting. NAV-TV ZEN-H Factory A2B Integration The ZEN-H allows the compatible factory Harley-Davidson radio to feed the Cicada DSP amplifier without replacing the factory infotainment system. Factory A2B Conversion Converts the compatible factory signal into analog outputs. Eight Output Channels Supports the front system and properly planned future expansion. Factory Control Retention Retains supported factory audio controls and radio operation. DSP clarification: The standard ZEN-H provides the A2B signal conversion. The FLX1400.4PRO supplies the system’s DSP processing, Bluetooth streaming and tuning functions. Power Wiring and Fuse Protection The Cicada HDPG4K supplies the heavy-gauge power and ground foundation required for the FLX1400.4PRO installation. Power Kit Cicada Audio HDPG4K Power Cable 4-AWG OFC cable Ground Cable 4-AWG OFC cable Fuse Holder Waterproof Mini-ANL Amplifier Recommended Fuse 100A Fuse selection: Use the supplied 100-amp fuse only after confirming that the complete wiring, fuse holder, terminals and installation comply with current Cicada guidance for the FLX1400.4PRO. DSP Setup and Component Protection Install both passive tweeter crossovers correctly. Do not connect either tweeter directly to unfiltered amplifier output. Configure protective high-pass filtering for both front channels. Set gain using measured clean output rather than by ear. Use DSP output limiting to protect the mid-bass drivers. Use equalization to correct fairing-specific response issues. Use time alignment to improve left-to-right arrival timing. Confirm tweeter polarity and attenuation before final assembly. Reduce output immediately if distortion or mechanical noise occurs. Professional tuning recommended: Final crossover, equalization, time alignment, gain and limiting settings depend on the motorcycle, installation and intended listening level. Installation Instructions and Resources Speaker Installation Cicada Speaker and Crossover Installation Speaker Polarity Check Road Glide and A2B Installation Road Glide Fairing Removal Late-Model Harley T-Harness Installation Motorcycle Amplifier Installation Parts Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Complete System Specifications System Type Two-position Road Glide component system with DSP amplifier Primary Applications Compatible 2023 CVO Road Glide and 2024-Present Road Glide Component Speaker Kit Cicada Audio 24CXK65.2RG Mid-Bass Drivers Two 6.5-inch 2Ω drivers Tweeters Two one-inch 4Ω shallow horn tweeters Amplifier Cicada Audio FLX1400.4PRO Amplifier Output at 2Ω 350W RMS × 4 at 14.4V DSP Channels Six total: four amplified and two pass-through Amplified Front Channels Used Two Available Amplified Channels Two Available DSP Pass-Through Channels Two Factory Signal Integration NAV-TV ZEN-H A2B interface Power Wiring Cicada Audio HDPG4K 4-AWG installation kit Built-In Amplifier DSP Yes Bluetooth Audio Streaming Yes USB-C DSP Tuning Yes Rear Speakers Included No Fitment and Ordering Notes Submit complete motorcycle information: Confirm the motorcycle year, exact Road Glide model, trim, factory radio, factory amplifier, A2B configuration and current audio modifications. This product is configured for compatible Road Glide motorcycles. The speaker kit uses two 2-ohm mid-bass drivers. The speaker kit uses two 4-ohm shallow horn tweeters. Both passive crossover networks must be used. Two amplifier channels operate the front component system. Two amplified DSP channels remain available for expansion. Two additional DSP pass-through channels are available. Rear speakers and rear mounting components are not included. Verify speaker depth, grille clearance and crossover placement. Verify amplifier mounting space and rack compatibility. Correct DSP setup and output limiting are required. Professional installation and tuning are strongly recommended. Related Motorcycle Audio Categories Road Glide and Cicada Audio 2023 CVO / 2024-present Harley Plug-and-Play Kits Shop Cicada Audio Shop Motorcycle Speakers Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Road Glide DSP Audio System FAQ Which amplifier is included? The system includes the current Cicada Audio FLX1400.4PRO 350-watt × four-channel DSP amplifier. Is this the discontinued FLX1400.4P? No. This updated package uses the current FLX1400.4PRO amplifier. How many speakers are included? The system uses two primary fairing positions and contains two mid-bass drivers and two separate tweeters. How much power does the amplifier produce at 2 ohms? The FLX1400.4PRO produces 350 watts RMS per channel at 2 ohms and 14.4 volts. How many DSP channels does the amplifier provide? It provides six DSP channels: four amplified outputs and two pass-through outputs. Does the amplifier support Bluetooth audio? Yes. Bluetooth audio streaming is built into the FLX1400.4PRO. How is the DSP configured? The amplifier supports USB-C computer tuning and DIALD app-based configuration. Are passive tweeter crossovers included? Yes. The component kit includes external crossover networks and tweeter-attenuation resistor options. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley-Davidson A2B signal into analog outputs for the Cicada amplifier. Are all four amplified channels used? No. Two channels operate the front component system, leaving two amplified channels available for properly matched expansion. Are rear speakers included? No. Rear speakers, rear wiring and rear mounting components must be added separately. Is professional tuning recommended? Yes. Proper crossover, equalization, limiting and gain configuration are essential because the amplifier has more available output than the included mid-bass drivers require. Need Help Matching This Road Glide Audio System? Garage Bagger Stereo can help verify Road Glide fitment, component impedance selection, amplifier matching, fairing speaker and amplifier mounting, power and speaker wiring, passive crossover placement and factory A2B signal integration before installation. Installation Services Request a Custom BuildSale -
SaleCICADA AUDIO 2014-23 10" COMPLETE INSTALLATION KIT
Vendor:Cicada AudioHarley-Davidson 2014-23 10" Complete Installation Kit Free shipping use code ShipOne at checkout Kit Includes: 14HDRING10 Cut-In Mounting Rings Pre-cut Aluminum Backed Damping Mat Painted Stainless Steel Stabilizing Brace ABS Molded Grilles with Powder Coated Metal Grille Inserts Form-Fitted, Rubber-Molded Gaskets Stainless Steel Hardware 14HDRINGT Direct-Fit Pro Mid-Bass/Woofer/Port Template Kit (L/R) Cicada Audio® American is designed exclusively for Harley-Davidson Engineered for CMB10.S4 & CMB8.S4 (sold separately) Custom Molded High-Grade ABS Templates Form-fitted to Saddlebag (L/R) Traces for speaker cut out for either CMB8.S4 & CMB10.S4 Guidelines for HDPORT3-speaker port cutout Saddlebag Brace Templates (L/R) Alignment guides to trace drill out holes for the bag brace HDPORT3 PORTS > Flush Mount + ABS Molded CLAMPING RINGS > Aluminum + Powder Coated GASKETS > Form Fitted + Rubber Molded HARDWARE > Stainless Steel Compatible with all Cicada Audio® Mid-Bass/Woofers & Designed for MotorcyclesSale -
SaleCicada Audio 24CHDSGGTK-05 Street Glide Grilles with RR05T Tweeters
Vendor:Cicada Audio2023 CVO / 2024-Present STREET GLIDE AUDIO Cicada Audio 24CHDSGGTK-05 Street Glide Grilles with RR05T Tweeters Add stronger high-frequency projection to a compatible late-model Harley-Davidson Street Glide with model-specific Cicada Audio fairing grilles loaded with RR05T horn tweeters. Each 4-ohm tweeter uses a titanium dome, neodymium motor and supplied external crossover to produce clear, efficient highs that cut through wind, engine and road noise. See Everything Included View Specifications Street Glide Tweeter Upgrade Street Glide-specific fairing grille design Matched left and right grille pair Two Cicada Audio RR05T tweeters 4-ohm impedance per tweeter 40W RMS / 80W maximum published power handling Titanium tweeter domes Neodymium magnet structures 99 dB sensitivity 3 kHz–20 kHz frequency response External 7 kHz/12 dB crossovers Powder-coated steel grilles All-weather motorcycle construction Sold as a matched pair High-Frequency Upgrade for the Late-Model Street Glide The Cicada Audio 24CHDSGGTK-05 combines custom Street Glide fairing grilles, dedicated tweeter mounts, two RR05T tweeters and their required crossover networks into one vehicle-specific high-frequency upgrade. The RR05T tweeters are engineered to improve vocal detail, cymbal definition and upper-frequency projection in open-air motorcycle audio systems. Their efficient 99 dB sensitivity helps produce strong output without requiring excessive amplifier power. Powder-coated steel grilles protect the tweeters while maintaining a clean, factory-style installation in compatible Street Glide fairings. Tweeter kit only: This package does not include 6.5-inch mid-bass or full-range speakers. The tweeters must be used with the supplied crossovers and properly matched front speakers and amplification. Harley-Davidson Fitment 2023 CVO Street Glide Intended for compatible late-production CVO Street Glide fairings using the redesigned grille configuration. 2024-Present Street Glide Designed around compatible 2024-Present Harley-Davidson Street Glide fairing grille locations. Street Glide-specific fitment: This is not the Road Glide grille configuration. Confirm the motorcycle year, exact model, trim, fairing design and existing audio equipment before ordering. Everything Included Left Street Glide Fairing Grille One powder-coated steel grille with an integrated mount for the supplied Cicada RR05T tweeter. Right Street Glide Fairing Grille One matching right-side grille engineered for a balanced, factory-clean fairing installation. Two Cicada RR05T Tweeters One matched pair of 4-ohm horn tweeters with titanium domes and neodymium magnet structures. External Crossover Networks Two custom-tooled, vented 7 kHz/12 dB crossover networks that filter and protect the tweeters. Why Riders Choose the 24CHDSGGTK-05 Vehicle-Specific Grilles Custom grille geometry delivers a cleaner installation than a universal surface-mounted tweeter arrangement. Strong Highway Projection High sensitivity helps preserve vocal and high-frequency detail at highway listening levels. Titanium Dome The rigid tweeter diaphragm supports crisp, detailed high-frequency reproduction. Neodymium Motor A compact, lightweight magnet structure provides efficient output without excessive fairing weight. Protected Crossover The supplied external network filters frequencies below the tweeter’s intended operating range. All-Weather Design Materials are selected for vibration, heat and exposed motorcycle operating conditions. Key Specifications Manufacturer Cicada Audio Manufacturer SKU 24CHDSGGTK-05 Product Type Street Glide fairing grille and tweeter kit Vehicle Application Compatible 2023 CVO and 2024-Present Street Glide Quantity Matched left and right pair Tweeter Model Cicada Audio RR05T Nominal Impedance 4Ω per tweeter Published Power Handling 40W RMS / 80W maximum Tweeter Dome Titanium Voice Coil 19 mm high-temperature design Magnet Neodymium Sensitivity 99 dB at 1W/1m Frequency Response 3 kHz–20 kHz ±3 dB External Crossover 7 kHz / 12 dB per octave Grille Material Powder-coated steel Flush Mounting Depth 0.85 inch / 21.7 mm Flush Mounting Diameter 1.75 inches / 38.1 mm Surface Mounting Protrusion 1.1 inches / 28 mm Surface Mounting Diameter 1.8 inches / 46.1 mm Warranty Two years through Cicada Audio Amplifier and Crossover Matching The RR05T tweeters must receive a filtered high-frequency signal. Always install the supplied 7 kHz crossover networks between the amplifier output and the tweeters. Use one crossover network for each tweeter. Do not connect either tweeter directly to full-range amplifier power. Verify positive and negative polarity on both sides. Secure each crossover where it is protected from water and vibration. Match amplifier output to the published tweeter power handling. Reduce gain immediately if the tweeters sound harsh or distorted. Confirm that the existing front speakers can blend with a 7 kHz tweeter crossover. System matching matters: Adding high-frequency output without balancing the mid-bass speakers, amplifier gain and crossover response can create an overly bright or poorly integrated front stage. Installation Resources Street Glide Fairing Access 2024-Present Street Glide Fairing Removal Speaker System Planning Shop Motorcycle Speakers Shop Motorcycle Amplifiers Shop Cicada Audio Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Fitment and Ordering Notes Sold as one matched left and right grille-and-tweeter pair. Designed for compatible late-model Street Glide fairings. Not designed for Road Glide fairing grille locations. Mid-bass and full-range speakers are not included. Amplifier, speaker wiring and signal integration are not included. Both external crossover networks must be installed. Confirm fairing fitment and current speaker configuration before ordering. Confirm amplifier output and gain settings before playing the system. Current Shipping Promotion Enter code ShipOne at checkout for eligible free shipping. Current checkout requirements and exclusions apply. Related Motorcycle Audio Categories Late-Model Harley Audio 2023 CVO / 2024-present Harley Plug-and-Play Kits Motorcycle Speakers Cicada Audio Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Street Glide Grille and Tweeter FAQ What is included with the 24CHDSGGTK-05? The package includes a matched pair of Street Glide fairing grilles, two Cicada RR05T tweeters and two external crossover networks. Does this kit include 6.5-inch speakers? No. This package adds grille-mounted tweeters only. Mid-bass or full-range fairing speakers must already be installed or purchased separately. What motorcycles does it fit? It is designed for compatible 2023 CVO Street Glide and 2024-Present Harley-Davidson Street Glide fairings. Will it fit a Road Glide? No. The Road Glide uses a different fairing and grille configuration. What impedance are the tweeters? Each RR05T tweeter has a nominal impedance of 4 ohms. How much power do the tweeters handle? Cicada publishes 40 watts RMS and 80 watts maximum power handling. Are crossovers included? Yes. Two external 7 kHz/12 dB crossover networks are included. Can the tweeters be connected directly to an amplifier? No. The supplied crossover networks must be installed to prevent damaging low frequencies from reaching the tweeters. Are the grilles sold separately from the tweeters? This SKU is the complete grille-and-tweeter package. Cicada also offers grille-only versions under separate part numbers. Is professional installation recommended? Yes. Correct fairing removal, crossover mounting, wiring polarity, amplifier matching and gain setup are important for reliable performance. Need Help Matching This Street Glide Tweeter Kit? Garage Bagger Stereo can help verify motorcycle fitment, 4-ohm impedance selection, amplifier matching, grille and crossover mounting, speaker wiring and factory or aftermarket signal integration before installation. Installation Services Request a Custom BuildSale -
Cicada Audio QDW1412 14 Guage Speaker Wire Waterproof Quick Disconnects
Vendor:Cicada AudioCicada Audio® – 14 AWG Motorcycle Speaker Wire with Waterproof Quick Disconnects (Pair) Engineered for riders who demand premium sound, the Cicada Audio® QDW1412 is a rugged 14-gauge speaker wire designed specifically for motorcycle audio systems. This 12-foot wire pair delivers reliable performance, easy installation, and long-lasting durability in any environment. Key Qualities Heavy-Duty 14 AWG Wire – Built to support the power demands of high-performance motorcycle sound systems. Waterproof Quick Disconnects – Includes both male and female connectors for fast, secure, and weather-resistant connections. 12-Foot Length – Offers flexibility for custom motorcycle installations. Red/Black Color Coding – Simplifies polarity identification for accurate and efficient wiring. Also Ideal For Marine Audio Systems Car Audio Installations Powersports and Off-Road Vehicles Whether you’re customizing your bike or upgrading your ride’s sound system, the QDW1412 speaker wire from Cicada Audio® is built to deliver clean, powerful audio wherever your journey takes you.
Cicada Motorcycle Audio at a Glance
| Coaxial speakers | CX65, CX69, CXX65, CXX69, CHX65 PRO, CHX69, CHX8 and horn models CH65, CH69W, CH8 |
| Mid-bass | CMB8.S4, CMB10.S4 and CMB10.S4NEO saddlebag kits |
| Components | 14CXK65 (2014-2023) and 24CXK65 (2024-Present) component kits, CXK69 6x9 kit |
| Amplifiers | FLX series four-channel and mono motorcycle amplifiers |
| Wiring | HDPG8K and HDPG4K amp power kits, HDTSLINKAR-B 2014-2023 factory radio T-harness |
Summarized from the products in this collection. Confirm your model and year on each product page before ordering.
Cicada Audio Speakers, Amplifiers and Install Parts for Motorcycles
Cicada builds motorcycle-specific audio, so most parts drop into Harley-Davidson baggers. Start with speakers: the CHX65 PRO 6.5" pro coaxial, CHX69 6x9 pro coaxial and the CX65 cover fairing and bags. Want more output in the bags? The CMB10.S4 10" mid-bass kit and CMB8.S4 8" kit include install rings and templates, and the CXK69 component kit lifts the 6x9 lids. Power it with the FLX700.4 and wire it with the HDPG4K power kit and factory radio T-harness.
Related Shopping
Complete the install.
- Cicada Coaxial Speakers – Pro coaxial range
- Motorcycle Amplifiers – Compare amps
- Motorcycle Subwoofers – Add bass
- 2024-Present 6.5 Speakers – Newest bikes
- Amplifier Parts – Wiring and hardware
Cicada Audio Coaxial Speakers, Mid-Bass Drivers, Amplifiers and Harnesses for Harleys
The CXX69 6x9 inch coaxial is rated 200W RMS / 400W MAX in 2 ohm or 4 ohm, and the CHX69 pro coaxial is rated 400W RMS / 800W MAX each. The CXX57 5x7 inch coaxial is rated 125W RMS / 250W MAX and drops into factory bag lid locations on 1998-2023 Harley-Davidsons. For bass, the CMB8.S4 8 inch is rated 500W RMS / 1000W MAX at 4 ohms and the CMB10.S4 10 inch is rated 800W RMS / 1600W MAX; add the HDPORT3 port kit for saddlebags.
Amplifiers, Racks and Harnesses
The FLX700.4 delivers up to 175 watts x 4 at 2 ohms, while the FLX2000.4 delivers up to 542 watts RMS per channel at 2 ohms at 14.4 volts. Mount amps on the Road Glide rack or Street Glide rack (both 2014-2023), and tie into the factory radio with the HDTSLINKAR-B T-harness for 2014-2023. Compare more motorcycle amplifiers.
Cicada Motorcycle Audio FAQ
What is the difference between Cicada CX, CXX, CH and CHX speakers?
Cicada sorts its coaxials into four lines: CX is Coax, CXX is Pro Coax, CH is Coax Horn and CHX is Pro Coax Horn. The horn lines put a horn-loaded tweeter in the center for more projection over wind noise. Most models come in 2-ohm versions (ending in .2) and 4-ohm versions (ending in .4), so match the impedance to how your amplifier will run them.
Will Cicada 6.5-inch speakers fit my factory fairing locations?
Cicada designs its CHX 6.5-inch Pro Coax Horn for all 2014-2023 and 2024-present Harley factory locations, with a 67 mm (2.6-inch) mounting depth. Road Glide and Street Glide grilles are sold separately for each fairing. Saddlebag 6x9 and 8-inch speakers need a lid kit, such as the Cicada CHDLID for 2014-2023 or the 24CHDLID for 2024-present.
How do I add a Cicada amplifier to a 2014-2023 factory radio?
Use the Cicada HDTSLINKAR-B factory radio T-harness, which plugs in to pull the speaker signal for the amp without splicing factory wiring. It carries signal only, so add a power kit such as the HDPG4K or HDPG8K. The HDFLXFO harness handles the front fairing speakers, and the HDFLXRO covers the rear saddlebag or Tour-Pak speaker run.
Does Cicada make complete systems for 2024-present Harleys?
Yes. Cicada's 24FLX systems are built per model, RG for Road Glide and SG for Street Glide, in 2-speaker, 4-speaker and 8-speaker layouts on FLX amplifiers, including DSP versions. For rear speakers on 2024-present bikes, the 24HDRO harness connects the factory rear speaker output to an aftermarket system. Compare all of them in our 2024-present plug-and-play kits collection.
Need Help Choosing Cicada Motorcycle Audio?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.
Cicada Harley Speaker Kits by Year: What's Year-Specific and What Isn't
Cicada speakers don't care what year your bike is. A CHX65 is a 6.5" pro coaxial whether it lands in a 2009 batwing or a 2025 Road Glide. The year lives in the parts around the speaker: grilles, harnesses, amp racks and lid kits. Get those right and the speaker drops in.
- 1998-2013: pick Cicada speakers by the size of your fairing and lid openings, then plan how the amp gets its signal. Call us before you order hardware for these bikes.
- 2014-2023: the HDTSLINKAR-B T-harness ties an amp into the factory radio, the 14CXK65 component kit fills the fairing, the CHDLID kit cuts speakers into the lids, and CHDSGG grilles finish a Street Glide.
- Road Glide 2015-2023: CHDRGG grilles up front and the 14HDAR-RG rack for the amp.
- 2024-Present: the 24CXK65 component kit, the 24HDRO rear output harness and 24CHDRGGT-075 Road Glide grilles with RR075T mounts.
Road King riders: there's no fairing, so there are no fairing grilles. Your Cicada build lives in the bags, the lowers or the tour pack.
Cicada Amps and DSP: Power Cicada Motorcycle Speakers Right
Pro coaxials and mid-bass want real power, not what a factory radio puts out. Cicada's FLX amps are four-channel: two channels for the fairing, two for the lids. Shop them all in Cicada motorcycle amplifiers and size the amp to the speakers you're actually running.
Wiring is where builds go wrong. The HDPG4K 4 AWG kit feeds the amp, the HDFLXFO harness runs the front fairing speakers, and the HDFLXRO harness runs the saddlebags or tour pack. If you want to tune it properly, the DSP412PRO 12-channel motorcycle DSP is where the tune gets dialed in.
One rule we don't bend: a mono amp is never plug and play. Adding a mono amp for bass means its own power run, a signal source and a tune. Budget the install time for it.
Installing Cicada 6.5 Motorcycle Speakers: Depth, Dividers and Ports
Most Cicada 6.5 install headaches come from depth, not diameter. Cicada's SPACER65-0.5 adds 1/2" of depth and works with every Cicada 6.5" speaker. The SPACER65-0.75 adds 3/4". Shim the speaker out before you start trimming fairing plastic.
In the bags, the CHD69HD (plastic) and CHD69SD (silicone) dividers give a 6x9 lid speaker its own space. Running CMB8.S4 or CMB10.S4 mid-bass in the bags? Cicada lists the HDPORT3 3" right-angled aero port kit as compatible with all its mid-bass drivers and woofers.
Check grille clearance, magnet depth and the wire path before you cut anything. Or book the build in Taylors, SC and we'll handle it.
More Cicada Motorcycle Audio Questions
Are Cicada speakers year-specific for my Harley?
No. Cicada speakers are sold by size and type, not by model year. The year-specific parts are the grilles, harnesses, amp racks and lid kits: 2014-2023, Road Glide 2015-2023, and 2024-Present each have their own.
What does the Cicada 24HDRO harness do?
Cicada says the 24HDRO connects the rear speaker output to an aftermarket audio system on 2024 and newer Harley-Davidson models. It is plug and play with factory-style connectors, so there's no cutting or splicing.
Do I need spacer rings for Cicada 6.5 speakers?
Only if your location is short on depth. The SPACER65-0.5 adds 1/2 inch and the SPACER65-0.75 adds 3/4 inch, and Cicada says the 0.5 fits every Cicada 6.5 inch speaker. Measure the depth behind the grille before you order.
Is a Cicada mono amplifier plug and play?
No. A mono amp is never plug and play. It needs its own power and ground run, a signal source and tuning, so plan for that install time.