Cicada Motorcycle Audio
Shop the full Cicada Audio motorcycle line for Harley-Davidson and Indian: coaxial and component speakers, mid-bass saddlebag kits, FLX amplifiers, subwoofers, grilles, install rings and wiring.
Shopping Cicada speakers for a Harley? Size the fairing first: 5.25" on most 1998-2013 batwings, 6.5" on 2014-2023 and 2024-Present, then 6x9 or 8" in the lids. Many come in 2Ω and 4Ω, so match the load to your amp.
Popular: Cicada plug-and-play kits · CHDLID 2014-2023 cut-in lid kit · 24HDRO 2024-Present rear harness
THE REFERENCE STANDARD
Cicada Motorcycle Audio
One of the most complete motorcycle audio lines, from speakers to install kits.
- CX, CXX, CHX and CH coaxial speakers
- CMB mid-bass and CXK component kits
- FLX amplifiers
- HDPG power kits and T-harnesses
- Grilles, rings, dividers and templates
Browse Collections
-
SaleCicada Promo – Cicada CMB8.S4 8" Saddlebag Speaker Kit + FREE Install Rings & Templates
Vendor:Cicada AudioThe Cicada CMB8.S4 8-inch Saddlebag Speaker Kit is a pair of Cicada Pro Mid-Bass drivers bundled with the 14HDRING8 mounting kit and 14HDRINGT template kit for 2014-2023 Harley-Davidson Touring bags. It is a high-power 8-inch saddlebag build for custom installs.Key Specs Two CMB8.S4 8-inch Pro Mid-Bass speakers, 4 ohm each 500W RMS per speaker, 2.5-inch 6-layer voice coil Carbon fiber cone Frequency response 35 Hz - 3 kHz Mounting diameter 7.38 inches, mounting depth 3.9 inches 14HDRING8 cut-in rings, braces, damping, grilles and hardware, plus 14HDRINGT templates Fitment and Installation NotesCicada describes these drivers as built for full custom builds, so confirm your bag and enclosure plan before cutting. The bundle is designed around 2014-2023 Touring saddlebags.Related: speaker installation parts, Cicada Audio, or get a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Promo – Cicada CMB10.S4 10" Mid-Bass Pair + FREE Install Kit & Templates
Vendor:Cicada AudioThe Cicada CMB10.S4 10-inch Mid-Bass Pair is a set of two Cicada Pro Mid-Bass drivers bundled with the 14HDRING10 mounting kit and 14HDRINGT template kit for 2014-2023 Harley-Davidson Touring saddlebags.Key Specs Two CMB10.S4 10-inch Pro Mid-Bass speakers, 4 ohm each 800W RMS per speaker 3-inch 6-layer voice coil Frequency response 35 Hz - 1.8 kHz Mounting diameter 8.9 inches, mounting depth 4.3 inches 14HDRING10 mounting kit and 14HDRINGT direct-fit templates Fitment and Installation NotesCicada notes that using these drivers is total custom fabrication, so plan the enclosure and port before cutting. This version is for 2014-2023 Touring bags.Related: speaker installation parts, 2014+ speaker lids, or get a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Promo – Cicada CMB10.S4NEO 10" Mid-Bass Pair + FREE Install Kit & Templates
Vendor:Cicada AudioThe Cicada CMB10.S4NEO 10-inch Mid-Bass Pair is two lightweight Cicada Pro Mid-Bass drivers with an N42 neodymium motor, bundled with the 14HDRING10 mounting kit and 14HDRINGT template kit for 2014-2023 Harley-Davidson Touring saddlebags.Key Specs Two CMB10.S4NEO 10-inch Pro Mid-Bass speakers, 4 ohm each 800W RMS / 1600W max per speaker 3-inch 6-layer OFC copper voice coil, N42 neodymium magnet Frequency response 35 Hz - 1.8 kHz, sensitivity 88 dB Mounting diameter 9 inches, mounting depth 4.5 inches 14HDRING10 mounting kit and 14HDRINGT direct-fit templates Fitment and Installation NotesThis version is built around 2014-2023 Touring saddlebags. Plan the enclosure and ports before cutting.Related: speaker installation parts, 2014+ speaker lids, or get a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Promo – Cicada CMB10.S4 10" Mid-Bass Pair + FREE 23.5+ Install Kit & Templates
Vendor:Cicada AudioThe Cicada CMB10.S4 10-inch Mid-Bass Pair is two Cicada Pro Mid-Bass drivers bundled with the 24HDRING10 ring and grille kit and 24HDRINGT template kit for 2023.5+ and 2024+ Harley-Davidson Touring saddlebags.Key Specs Two CMB10.S4 10-inch Pro Mid-Bass speakers, 4 ohm each 800W RMS per speaker 3-inch 6-layer voice coil Frequency response 35 Hz - 1.8 kHz Mounting diameter 8.9 inches, mounting depth 4.3 inches 24HDRING10 rings and grilles plus 24HDRINGT direct-fit templates Fitment and Installation NotesCicada notes that using these drivers is total custom fabrication, so plan the enclosure and port before cutting. This version is for 2023.5+ / 2024+ Touring bags.Related: 23.5+ installation parts, 23.5+ and 2024+ lids, or get a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Promo – Cicada CMB10.S4NEO 10" Mid-Bass Pair + FREE 23.5+ Install Kit & Templates
Vendor:Cicada AudioThe Cicada CMB10.S4NEO 10-inch Mid-Bass Pair is two lightweight Cicada Pro Mid-Bass drivers with an N42 neodymium motor, bundled with the 24HDRING10 ring and grille kit and 24HDRINGT template kit for 2023.5+ and 2024+ Harley-Davidson Touring saddlebags.Key Specs Two CMB10.S4NEO 10-inch Pro Mid-Bass speakers, 4 ohm each 800W RMS / 1600W max per speaker 3-inch 6-layer OFC copper voice coil, N42 neodymium magnet Frequency response 35 Hz - 1.8 kHz, sensitivity 88 dB Mounting diameter 9 inches, mounting depth 4.5 inches 24HDRING10 rings and grilles plus 24HDRINGT direct-fit templates Fitment and Installation NotesThis version is built around the 2023.5+ / 2024+ Touring saddlebag platform. Plan the enclosure and ports before cutting.Related: 23.5+ installation parts, 23.5+ and 2024+ lids, or get a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
SaleCicada Audio CH65 6.5" Pro Coaxial Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio CH65 6.5" Pro Coaxial Horn Speaker Pair Cicada Audio CH65 6.5" Pro Coaxial Horn Speakers are built for Harley-Davidson baggers and high-output motorcycle audio systems that need real volume, strong projection, and cleaner sound at highway speed. The CH65 combines a powerful midbass driver with an integrated horn tweeter for loud vocals, crisp highs, aggressive open-air output, and the kind of efficiency needed for amplified Harley audio builds. Shop Cicada Audio 6.5" Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD High-Output 6.5" Cicada Speakers for Harley Audio Built for riders who want louder fairing speaker output, sharper vocals, stronger mids, and better projection from a 6.5" motorcycle speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CH65 6.5" Pro Coaxial Horn Speaker Pair Current Part Numbers CH652C = 2Ω version / CH654C = 4Ω version Speaker Size 6.5" Speaker Type Pro coaxial horn speaker Sold As Pair Best For Harley-Davidson bagger audio, fairing speaker upgrades, high-output motorcycle audio systems, and amplified 6.5" speaker locations System Goal Louder vocals, stronger mids, crisp highs, better projection, and cleaner highway-speed output Always verify impedance, amplifier power, speaker pod fitment, mounting depth, wiring, and tuning before ordering for your Harley-Davidson audio build. Built for Loud Harley-Davidson Bagger Audio The Cicada CH65 is a strong choice for riders upgrading factory Harley-Davidson audio systems with aftermarket amplifier power. These speakers are made for motorcycle audio builds where basic replacement speakers are not enough and the goal is more volume, stronger clarity, and real projection while the bike is moving. If you are building a louder fairing speaker setup, a pro-audio style motorcycle system, or a high-output Harley bagger audio upgrade, the CH65 gives you the efficiency and output needed to cut through wind noise, road noise, and helmet interference. Fitment Note On 2015-2023 Road Glide models, speaker pods may require modification for proper installation. Always verify pod clearance, mounting depth, speaker location, impedance, amplifier compatibility, and final system layout before ordering. Specifications Power Handling 500 watts RMS / 1000 watts max per pair Frequency Response 75Hz–20kHz +/-5dB Magnet Structure Neodymium high-energy lightweight N35 magnet Basket Heavy-duty die-cast aluminum basket Midbass Voice Coil 2.0" high-temp voice coil Tweeter Voice Coil 1.4" aluminum diaphragm high-temp voice coil Sensitivity 94dB / 99dB average 1W/1M, 2.83V Crossover 12dB crossover with custom-tooled vented crossover case Bi-Amp Capable Horn tweeters can be run on dedicated amplifier channels Heat Control Advanced voice coil heat sink design for improved heat dissipation Speaker Control Shorting ring design for improved speaker control Mounting Depth 3.0" / 76.2mm Mounting Diameter 5.7" / 145.5mm Treatment Weather treated for motorcycle audio use Sold Pair Best Use for the Cicada CH65 The Cicada CH65 is best used in Harley-Davidson motorcycle audio builds where the goal is louder fairing speaker output, stronger vocal projection, improved clarity, and more efficient performance from a 6.5" speaker location. Amplified System Recommended These are not basic replacement speakers. The CH65 is intended for amplified motorcycle audio systems where output, control, tuning, and projection matter. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation path. These related collections help match the CH65 with the right Harley audio upgrade direction. Shop Motorcycle 6.5" Pro Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuningSale -
SaleCicada Audio HDPG8K 8 Gauge HD OFC Amplifier Installation Kit
Vendor:Cicada AudioCicada Audio HDPG8K 8 GUAGE POWER/GROUND HARNESS KIT FOR HD Looking to upgrade your audio system on your HD motorcycle? Using one of our amplifiers? Then this is the Heavy Duty power kit solution for your motorcycle audio needs. The HDPG8K Power/ground kit is designed to handle the higher current needs of the Cicada Audio DSP125.4D/CX125.4 and CX250.2 amplifiers. HDPG8K Power kit uses high-quality 8-gauge OFC copper cable eliminating chances of corrosion or increases cable resistance over time due to the harsh open environment. Capable of supplying current to most any heavy-duty application up to 60A (or 1000 WRMS!) of continuous current draw. HDPG8K Power Kit comes complete with a custom-molded WaterProof fuse holder (w/fuse), insulated high current ring terminals, and factory-type wire looming for the ultimate in power cable integration. Works In Most Any Motorcycle Amplifier Application Up To 60A. Includes Custom Tooled WaterProof Hi-Current Fuse Holder (w/60A fuse). Pre-Terminated And Insulated Battery Ring Terminals. 8-Gauge Hi-Quality OFC Copper Core Cable (No CCA garbage here). Loomed Harness Design Improved Integration And Ease Of Installation Into Your Motorcycle. Will work for any amp requiring 8g wiringSale -
SaleCicada Audio CX65 6.5" Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CX65 6.5" Coaxial Speaker Pair Cicada Audio CX65 6.5" Coaxial Speakers are built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and bagger audio systems that need clean sound, shallow fitment, weatherproof construction, and simple 6.5" speaker upgrade performance. Available in 2Ω and 4Ω versions, the CX65 gives riders a strong full-range coaxial speaker option for factory-style Harley speaker locations. Shop Cicada Audio 6.5" Coaxial Speakers Cicada Amplifiers THE REFERENCE STANDARD Shallow 6.5" Cicada Speakers for Harley Audio Built for riders who want clean full-range sound, simple factory-style fitment, weatherproof durability, and stronger output from a 6.5" Harley-Davidson speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CX65 6.5" Coaxial Speaker Pair Speaker Size 6.5" Speaker Type High-performance full-range coaxial motorcycle speaker Impedance Options 2Ω and 4Ω versions available depending on selected variant Best For Harley-Davidson Touring audio upgrades, 2014-2023 Harley factory-style 6.5" speaker locations, fairing speaker upgrades, and clean full-range motorcycle audio systems System Goal Clean sound, shallow fitment, better clarity, weatherproof durability, efficient output, and improved Harley bagger audio Sold As Pair Always verify impedance, speaker location, mounting depth, grille clearance, amplifier compatibility, and final fitment before ordering for your Harley-Davidson audio build. Built for 2014-2023 Harley-Davidson Fairing Speaker Upgrades The Cicada CX65 is designed as a strong 6.5" speaker upgrade for 2014-2023 Harley-Davidson factory-style fairing speaker locations. Its shallow, low-profile design helps simplify installation while giving riders better output, cleaner clarity, and weatherproof performance compared to basic factory replacement speakers. The CX65 does not require a separate tweeter location in the fairing. The full-range coaxial design keeps the install cleaner while still giving Harley riders better sound quality, improved efficiency, and a stronger motorcycle audio foundation. Weatherproof Full-Range Coaxial Design The CX65 uses a weatherproof IMPP cone with NBR surround, high-temperature polymer frame, PEI dome tweeter, neodymium magnet structure, built-in 6dB crossover, DPSH® Dual-Phase Slot Horn design, and advanced voice coil heat sink construction. The 2Ω version can help produce more output with smaller, higher-efficiency amplifiers, while the 4Ω version gives builders another option depending on amplifier setup, system layout, and final impedance goals. Specifications Speaker Size 6.5" coaxial speaker Power Handling 100 watts RMS / 200 watts max Frequency Response 54Hz–20kHz +/-5dB Sensitivity 94dB 1W/1M average, 2.83V Magnet Structure Neodymium high-energy lightweight N35 magnet structure Cone Waterproof IMPP cone Surround NBR surround Frame / Basket Heavy-duty injected high-temperature polymer frame Midbass Voice Coil 1.4" high-temperature 2Ω or 4Ω Black Coat™ voice coil Tweeter 1.0" PEI dome tweeter with neodymium magnet Horn / Dispersion Technology DPSH® Dual-Phase Slot Horn Crossover Built-in 6dB crossover Speaker Control Shorting ring design for improved speaker control Heat Control Advanced voice coil heat sink design for improved heat dissipation Mounting Depth 2.26" / 57.4mm Mounting Diameter 5.32" / 135.1mm Outside Dimensions 6.5" / 165mm Weather Protection Weatherproof motorcycle speaker construction Sold Pair Best Use for the Cicada CX65 The CX65 is best used in Harley-Davidson Touring and bagger audio systems where riders want a shallow 6.5" coaxial speaker upgrade with clean sound, simple fitment, and weatherproof construction for daily riding. Factory-Style Speaker Locations The CX65 is a strong option for 2014-2023 Harley-Davidson factory-style speaker locations. Always verify speaker depth, mounting diameter, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Fitment and Installation Notes The Cicada CX65 is intended for 2014-2023 Harley-Davidson fairing speaker locations and factory-style 6.5" motorcycle audio upgrades. Every installation should still be verified before ordering. Confirm mounting depth, mounting diameter, grille clearance, pod fitment, wiring path, impedance, and amplifier compatibility before installation. Some Road Glide, Street Glide, CVO, Indian, and custom bagger applications may require additional installation planning depending on factory parts, speaker pods, adapters, fairing layout, or final audio system design. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio CHX65 PRO 6.5" Pro Coaxial Horn Speakers (Pair)
Vendor:Cicada AudioThe Cicada Audio CHX65 PRO is a 6.5" pro coaxial horn speaker sold as a pair in 2Ω (CHX65.2PRO) or 4Ω (CHX65.4PRO), rated 300 watts RMS / 600 watts max with 92dB sensitivity. Carbon Matrix Composite cone, aluminum tweeter dome and N45SH neodymium motor External 12dB crossover at 4kHz with -3/-6dB tweeter attenuation Weatherproof: Nanofram horn cover and Rain or Shine Pro all-weather design 2.6" (67mm) mounting depth, 5.75" (145.4mm) mounting diameter Fits all 1998-Present Harley-Davidson Touring models: drop-in on 2014-2023 and 2024-Present fairings; 1998-2013 fairings require Metra 82-9601 adapter rings Tour pack: 1998-2013 requires the Speed Rings Lowers/Pak Expansion Kit; 2014-Present may need Cicada's SPACER65-0.5 1/2" spacer Three-year Cicada warrantySale -
SaleCicada Audio HDPG4K 4 AWG Amp Power Kit
Vendor:Cicada AudioThe Cicada Audio HDPG4K is a 4 AWG amplifier power kit for Harley-Davidson motorcycles. It includes 6 ft of power and ground cable with black braid, plus a fuse holder and a remote trigger wire.Key Specs 6 ft 4 AWG power/ground, black over braid Ring terminals at the battery side; ferrules at the amp side Remote trigger wire with H-D plug, for termination or to plug into the H-D harness Waterproof Mini ANL fuse holder with 60, 80 and 100 amp fuses Browse more amplifier parts and Harley-Davidson plug-and-play kits, or see our custom build options.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
Cicada Audio HDTSLINKAR-B 2014–2023 Harley Factory Radio T-Harness
Vendor:Cicada Audio2014–2023 HARLEY FACTORY RADIO INTEGRATION Cicada Audio HDTSLINKAR-B 2014–2023 Harley Factory Radio T-HarnessNo stock radio Flashing Required! Integrate a compatible four-channel aftermarket amplifier with the factory radio in a 2014–2023 Harley-Davidson Road Glide or Street Glide without cutting or splicing the motorcycle’s factory wiring. Removable RCA connectors support conventional aftermarket amplifiers, while the built-in four-position Molex connector provides a cleaner direct connection to Cicada Audio amplifiers. View Connection Options Verify Harley Fitment One Harness for Complete Audio Integration Fits compatible 2014–2023 Harley Touring motorcycles Road Glide and Street Glide applications Factory-amplified and non-amplified systems Basic through CVO Ultra factory audio systems Designed for four-channel amplifier integration Removable RCA output connectors Four-position Cicada amplifier Molex connector Balanced factory-radio audio signal Maestro AR ready included Retains supported factory fade operation Retains supported handlebar audio controls No factory-wire cutting or splicing Updated Replacement for the Cicada HDTSLINKv2 The HDTSLINKAR-B replaces the previous HDTSLINK and HDTSLINKv2 factory-radio harness with a more flexible amplifier connection system. The updated removable RCA connections allow the harness to integrate with compatible four-channel amplifiers using conventional low-level RCA inputs. Installers using Cicada Audio amplifiers can instead use the built-in four-position Molex connector for a cleaner direct connection. This dual-connection design removes the old limitation that prevented the previous harness from connecting directly to certain amplifier platforms. Correct fitment: This updated harness is for 2014–2023 Harley-Davidson Road Glide and Street Glide motorcycles. It is not the correct A2B interface for 2023 CVO or 2024-Present Touring motorcycles. Harley-Davidson Fitment 2014–2023 Road Glide Supports compatible Road Glide factory-radio systems within the 2014–2023 Harley Touring platform. 2014–2023 Street Glide Supports compatible Street Glide factory-radio systems within the 2014–2023 Harley Touring platform. CVO and Ultra Systems Designed to support compatible basic, factory-amplified, non-amplified and CVO Ultra stereo configurations. Confirm the complete audio configuration: Verify the motorcycle year, exact model, factory radio, factory amplifier, fairing-speaker locations, rear-speaker locations and existing audio modifications before ordering. Two Amplifier Connection Options Removable RCA Outputs Use the removable RCA connectors to feed a compatible four-channel aftermarket amplifier with traditional low-level RCA inputs. Cicada Molex Connection Use the built-in four-position Molex connector for direct plug-in integration with compatible Cicada Audio amplifiers. Provides front and rear four-channel audio integration. Supports compatible fairing and rear-speaker configurations. Reduces unnecessary adapter harnesses and connection points. Maintains a cleaner factory-style installation. Allows the same primary harness to support multiple amplifier platforms. Amplifier input verification: Confirm the selected amplifier accepts the available RCA or Cicada Molex connection before beginning installation. Factory Radio and OEM Control Retention The HDTSLINKAR-B is designed to provide a clean audio signal from the original Harley-Davidson radio while avoiding unnecessary changes to the motorcycle’s factory CAN-bus wiring. Factory Fade Support Retains supported front-to-rear fade operation when the complete audio system is wired and configured correctly. Handlebar Controls Maintains supported factory handlebar audio adjustments through the original radio system. Factory EQ Integration Supports factory EQ operation and Maestro AR integration for systems requiring radio-EQ correction or flashing. Maestro AR Integration Cicada identifies the HDTSLINKAR-B as Maestro AR ready for compatible systems using ADS Maestro AR to flatten or flash factory radio EQ settings. Cicada’s current package listing states that Maestro and AR are included. Confirm the exact Maestro hardware and accessories contained in current inventory when receiving and fulfilling the product. Programming may still be required: Maestro-supported radio flashing, EQ correction and module configuration must be completed according to the requirements of the motorcycle, radio and final audio system. Multiple Harness Functions in One Assembly The HDTSLINKAR-B combines the functions that previously required several separate adapters, power taps and speaker harnesses. Front Signal Integration Provides the required front factory-radio signal path for a compatible aftermarket amplifier. Rear Signal Integration Supports rear audio signal routing for compatible saddlebag, lid or Tour-Pak speaker systems. Accessory Power Connection Replaces the need for a separate stealth accessory power-tap harness in supported installations. Rear Speaker Wiring Provides the rear speaker wiring path required for compatible bag or Tour-Pak audio configurations. Battery and Ground Tap Consolidates supported battery and ground integration functions within the primary installation package. Fairing Speaker Pod Adapters Replaces separate fairing-speaker pod plug adapters in supported factory speaker configurations. Recommended Audio-System Applications The HDTSLINKAR-B provides its most complete integration benefits in four-channel Harley Touring audio systems using both front fairing speakers and rear speakers. Fairing and Saddlebag Speakers Supports systems using front fairing speakers and compatible saddlebag-lid speakers. Fairing and Tour-Pak Speakers Supports compatible Ultra systems using front fairing and rear Tour-Pak speaker locations. Four-Channel Amplifier Systems Designed around the signal and speaker-routing requirements of a conventional four-channel amplifier installation. Installation and Ordering Notes Disconnect the motorcycle battery before beginning installation. Confirm 2014–2023 Road Glide or Street Glide fitment. Identify whether the motorcycle is factory amplified. Confirm all factory and aftermarket speaker locations. Verify the amplifier uses compatible RCA or Cicada Molex inputs. Route harness wiring away from sharp edges, heat and steering movement. Secure all unused connectors against vibration and moisture. Confirm left, right, front and rear channel assignments before final assembly. Set amplifier gain and crossover controls after signal integration. Test fade, balance and handlebar controls before reinstalling the fairing. Not for current A2B motorcycles: A compatible A2B interface is required for 2023 CVO and 2024-Present Harley Touring factory audio systems. Product Specifications Manufacturer Cicada Audio Current Manufacturer SKU HDTSLINKAR-B Replaces HDTSLINK and HDTSLINKv2 Product Type Factory-radio amplifier integration T-harness Vehicle Platform 2014–2023 Harley-Davidson Touring Primary Models Road Glide and Street Glide Factory Audio Systems Factory-amplified and non-amplified systems Aftermarket Amplifier Channels Four-channel integration Conventional Amplifier Connection Removable RCA outputs Cicada Amplifier Connection Built-in four-position Molex connector Maestro AR Support Maestro AR ready Factory-Wire Cutting Required No Shopify Variants None Related Motorcycle Audio Categories Amplifier Integration Motorcycle Amplifier Parts Motorcycle Amplifiers Motorcycle DSP and Signal Integration Complete the Harley System Motorcycle Speakers Cicada Audio Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada HDTSLINKAR-B FAQ What motorcycles does the HDTSLINKAR-B fit? It is designed for compatible 2014–2023 Harley-Davidson Road Glide and Street Glide factory-radio systems. Does it fit 2024-Present Harley Touring motorcycles? No. The newest Harley Touring motorcycles use a different A2B factory-audio architecture and require an appropriate A2B interface. Does it work with factory-amplified motorcycles? Yes. Cicada designed the harness to support compatible factory-amplified and non-amplified 2014–2023 Harley systems. Can it connect to a non-Cicada amplifier? Yes. The removable RCA connectors support compatible four-channel aftermarket amplifiers using conventional RCA inputs. How does it connect to Cicada amplifiers? A built-in four-position Molex connector provides a direct plug-in path for compatible Cicada Audio amplifiers. Does it retain the factory fade control? It supports factory front-to-rear fade operation when the complete system is wired and configured correctly. Is it Maestro AR ready? Yes. Cicada identifies the HDTSLINKAR-B as Maestro AR ready for compatible factory-radio EQ flashing or correction. Does the installation require cutting factory wiring? No. The harness is designed as a plug-and-play integration solution without cutting or splicing the motorcycle’s factory wiring. Is an amplifier included? No. The aftermarket amplifier, power wiring, amplifier rack and additional system components are selected separately. Need Help Integrating a 2014–2023 Harley Factory Radio? Garage Bagger Stereo can help verify amplifier matching, mounting, power and speaker wiring, factory-radio signal integration and the correct RCA or Cicada Molex connection before installation. Installation Services Request a Custom Build -
SaleCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair) All Weather 6x9 Pro Coaxial Driver A Weatherproof Horn Cover is included on the compression driver. SPECIFICATIONS: 4Ω – 6X9-inch PRO coaxial horn driver Power handling: 400W RMS/800W MAX each Voice Coil: 2.5-inch/64mm Mid-bass & 1.75-inch/44mm Tweeter High-temperature design Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 92dB, 1W / 1M response 46Hz – 20kHz +/- 3dB Mounting Depth: 3.75-inch/96mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Rain or Shine™ all-weather performance design Available in 4 or 2Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient 1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat External 12dB crossover with optional -3/-6 tweeter resistor attenuatorSale
Cicada Motorcycle Audio at a Glance
| Coaxial speakers | CX65, CX69, CXX65, CXX69, CHX65 PRO, CHX69, CHX8 and horn models CH65, CH69W, CH8 |
| Mid-bass | CMB8.S4, CMB10.S4 and CMB10.S4NEO saddlebag kits |
| Components | 14CXK65 (2014-2023) and 24CXK65 (2024-Present) component kits, CXK69 6x9 kit |
| Amplifiers | FLX series four-channel and mono motorcycle amplifiers |
| Wiring | HDPG8K and HDPG4K amp power kits, HDTSLINKAR-B 2014-2023 factory radio T-harness |
Summarized from the products in this collection. Confirm your model and year on each product page before ordering.
Cicada Audio Speakers, Amplifiers and Install Parts for Motorcycles
Cicada builds motorcycle-specific audio, so most parts drop into Harley-Davidson baggers. Start with speakers: the CHX65 PRO 6.5" pro coaxial, CHX69 6x9 pro coaxial and the CX65 cover fairing and bags. Want more output in the bags? The CMB10.S4 10" mid-bass kit and CMB8.S4 8" kit include install rings and templates, and the CXK69 component kit lifts the 6x9 lids. Power it with the FLX700.4 and wire it with the HDPG4K power kit and factory radio T-harness.
Related Shopping
Complete the install.
- Cicada Coaxial Speakers – Pro coaxial range
- Motorcycle Amplifiers – Compare amps
- Motorcycle Subwoofers – Add bass
- 2024-Present 6.5 Speakers – Newest bikes
- Amplifier Parts – Wiring and hardware
Cicada Audio Coaxial Speakers, Mid-Bass Drivers, Amplifiers and Harnesses for Harleys
The CXX69 6x9 inch coaxial is rated 200W RMS / 400W MAX in 2 ohm or 4 ohm, and the CHX69 pro coaxial is rated 400W RMS / 800W MAX each. The CXX57 5x7 inch coaxial is rated 125W RMS / 250W MAX and drops into factory bag lid locations on 1998-2023 Harley-Davidsons. For bass, the CMB8.S4 8 inch is rated 500W RMS / 1000W MAX at 4 ohms and the CMB10.S4 10 inch is rated 800W RMS / 1600W MAX; add the HDPORT3 port kit for saddlebags.
Amplifiers, Racks and Harnesses
The FLX700.4 delivers up to 175 watts x 4 at 2 ohms, while the FLX2000.4 delivers up to 542 watts RMS per channel at 2 ohms at 14.4 volts. Mount amps on the Road Glide rack or Street Glide rack (both 2014-2023), and tie into the factory radio with the HDTSLINKAR-B T-harness for 2014-2023. Compare more motorcycle amplifiers.
Cicada Motorcycle Audio FAQ
What is the difference between Cicada CX, CXX, CH and CHX speakers?
Cicada sorts its coaxials into four lines: CX is Coax, CXX is Pro Coax, CH is Coax Horn and CHX is Pro Coax Horn. The horn lines put a horn-loaded tweeter in the center for more projection over wind noise. Most models come in 2-ohm versions (ending in .2) and 4-ohm versions (ending in .4), so match the impedance to how your amplifier will run them.
Will Cicada 6.5-inch speakers fit my factory fairing locations?
Cicada designs its CHX 6.5-inch Pro Coax Horn for all 2014-2023 and 2024-present Harley factory locations, with a 67 mm (2.6-inch) mounting depth. Road Glide and Street Glide grilles are sold separately for each fairing. Saddlebag 6x9 and 8-inch speakers need a lid kit, such as the Cicada CHDLID for 2014-2023 or the 24CHDLID for 2024-present.
How do I add a Cicada amplifier to a 2014-2023 factory radio?
Use the Cicada HDTSLINKAR-B factory radio T-harness, which plugs in to pull the speaker signal for the amp without splicing factory wiring. It carries signal only, so add a power kit such as the HDPG4K or HDPG8K. The HDFLXFO harness handles the front fairing speakers, and the HDFLXRO covers the rear saddlebag or Tour-Pak speaker run.
Does Cicada make complete systems for 2024-present Harleys?
Yes. Cicada's 24FLX systems are built per model, RG for Road Glide and SG for Street Glide, in 2-speaker, 4-speaker and 8-speaker layouts on FLX amplifiers, including DSP versions. For rear speakers on 2024-present bikes, the 24HDRO harness connects the factory rear speaker output to an aftermarket system. Compare all of them in our 2024-present plug-and-play kits collection.
Need Help Choosing Cicada Motorcycle Audio?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.
Cicada Harley Speaker Kits by Year: What's Year-Specific and What Isn't
Cicada speakers don't care what year your bike is. A CHX65 is a 6.5" pro coaxial whether it lands in a 2009 batwing or a 2025 Road Glide. The year lives in the parts around the speaker: grilles, harnesses, amp racks and lid kits. Get those right and the speaker drops in.
- 1998-2013: pick Cicada speakers by the size of your fairing and lid openings, then plan how the amp gets its signal. Call us before you order hardware for these bikes.
- 2014-2023: the HDTSLINKAR-B T-harness ties an amp into the factory radio, the 14CXK65 component kit fills the fairing, the CHDLID kit cuts speakers into the lids, and CHDSGG grilles finish a Street Glide.
- Road Glide 2015-2023: CHDRGG grilles up front and the 14HDAR-RG rack for the amp.
- 2024-Present: the 24CXK65 component kit, the 24HDRO rear output harness and 24CHDRGGT-075 Road Glide grilles with RR075T mounts.
Road King riders: there's no fairing, so there are no fairing grilles. Your Cicada build lives in the bags, the lowers or the tour pack.
Cicada Amps and DSP: Power Cicada Motorcycle Speakers Right
Pro coaxials and mid-bass want real power, not what a factory radio puts out. Cicada's FLX amps are four-channel: two channels for the fairing, two for the lids. Shop them all in Cicada motorcycle amplifiers and size the amp to the speakers you're actually running.
Wiring is where builds go wrong. The HDPG4K 4 AWG kit feeds the amp, the HDFLXFO harness runs the front fairing speakers, and the HDFLXRO harness runs the saddlebags or tour pack. If you want to tune it properly, the DSP412PRO 12-channel motorcycle DSP is where the tune gets dialed in.
One rule we don't bend: a mono amp is never plug and play. Adding a mono amp for bass means its own power run, a signal source and a tune. Budget the install time for it.
Installing Cicada 6.5 Motorcycle Speakers: Depth, Dividers and Ports
Most Cicada 6.5 install headaches come from depth, not diameter. Cicada's SPACER65-0.5 adds 1/2" of depth and works with every Cicada 6.5" speaker. The SPACER65-0.75 adds 3/4". Shim the speaker out before you start trimming fairing plastic.
In the bags, the CHD69HD (plastic) and CHD69SD (silicone) dividers give a 6x9 lid speaker its own space. Running CMB8.S4 or CMB10.S4 mid-bass in the bags? Cicada lists the HDPORT3 3" right-angled aero port kit as compatible with all its mid-bass drivers and woofers.
Check grille clearance, magnet depth and the wire path before you cut anything. Or book the build in Taylors, SC and we'll handle it.
More Cicada Motorcycle Audio Questions
Are Cicada speakers year-specific for my Harley?
No. Cicada speakers are sold by size and type, not by model year. The year-specific parts are the grilles, harnesses, amp racks and lid kits: 2014-2023, Road Glide 2015-2023, and 2024-Present each have their own.
What does the Cicada 24HDRO harness do?
Cicada says the 24HDRO connects the rear speaker output to an aftermarket audio system on 2024 and newer Harley-Davidson models. It is plug and play with factory-style connectors, so there's no cutting or splicing.
Do I need spacer rings for Cicada 6.5 speakers?
Only if your location is short on depth. The SPACER65-0.5 adds 1/2 inch and the SPACER65-0.75 adds 3/4 inch, and Cicada says the 0.5 fits every Cicada 6.5 inch speaker. Measure the depth behind the grille before you order.
Is a Cicada mono amplifier plug and play?
No. A mono amp is never plug and play. It needs its own power and ground run, a signal source and tuning, so plan for that install time.