Motorcycle Speakers
Motorcycle speakers for touring bikes, including 6.5-inch coaxial and midrange speakers from Cicada Audio, Ground Zero, Diamond Audio and Hertz, 6x9 coaxial models and 8-inch midrange options. Pick the size for your mounting location first, then match power to your amplifier.
THE REFERENCE STANDARD
Build It Right the First Time
Not sure which parts fit your exact bike and setup? Start with a clean, correct plan.
- Fitment confirmed for your exact bike and year
- Parts matched to your speakers and amplifier
- Build help from a GBS specialist
Browse Collections
-
SaleCicada Audio CXXM65 6.5" Mid-Bass Speakers | 2Ω or 4Ω – Pair
Vendor:Cicada AudioThe Cicada Audio CXXM65 is a high-output 6.5-inch mid-bass speaker pair for motorcycle audio systems, available with 2-ohm or 4-ohm voice coils. Each speaker has a Kevlar cone in a heat-resistant polycarbonate frame.Key Specs 6.5-inch mid-bass driver, sold as a pair Power handling: 100W RMS / 200W max Sensitivity: 92 dB; frequency response 60Hz-5kHz (+/-3 dB) Kevlar cone, neodymium magnet, OFC copper voice coils Mounting depth 2.26 in (57mm); mounting diameter 5.43 in (138mm) 6.5-inch grilles and hardware included; two-year warranty Related: midrange and mid-bass speakers, Cicada Audio, speaker installation parts.Not sure what fits your bike? Start a build consultation or call 864-334-6131.Sale -
Kicker 8" CompRT All Weather Ultra Thin Subwoofer
Vendor:KickerThe Kicker 8 inch CompRT All Weather Ultra Thin Subwoofer is a shallow-mount dual voice coil sub available in 2 ohm or 4 ohm, sold individually.Key Specs Dual voice coils, 2 ohm or 4 ohm 300 W RMS, 600 W peak Sensitivity 81.8 dB; frequency response 30-500 Hz Mounting depth 2.7125 in Sealed box 0.2-1.0 cu ft; ported box 0.8-1.2 cu ft Grille not included; box includes sticker, four adhesive screw covers, manual and template Browse more subwoofers and Kicker, or ask about a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Beyma PRO8CF - 8" Pro Carbon Fiber Mid-bass Speaker (Single)
Vendor:BeymaBeyma PRO8CF 8" Pro Carbon Fiber Mid-bass Speaker (Sold in Singles) BEYMA PRO8CF MIDBASS SPEAKER HAS A STRONG CARBON FIBER CONE WITH GOOD POWER HANDLING OF 600 WATTS PROGRAM! Specifications Nominal Basket Diameter 8" / 200mm Impedance 4 ohms AES Power Rating 300 Watts Program Power 600 Watts Frequency Response 80Hz - 2KHz Sensitivity (1W/1m) 93dB Voice Coil Diameter 2" / 50.8mm Voice Coil Length 16mm Air Gap Height 8mm X Damage (peak to peak) 30mm Bl Factor (BL) 12.6 N/A Mounting Information Overall Diameter 8.3" / 212mm Bolt Circle Diameter 7.7" / 195mm Baffle Cutout Diameter- - Front Mount 7.1" / 181mm No. Of Mounting Holes 4 Overall Depth 3.7" / 95mm Net Weight 7.3 lb. / 3.3 kg. Shipping Weight 7.9 lb. / 3.6 kg. Materials Basket Die Cast Aluminum Cone Carbon Fiber Surround Treated Cloth Dust Cap Shape Inverted Voice Coil Copper Former Fiberglass Metal Parts Marine Treated Magnet Ferrite Thiele-Small Parameters Resonant Frequency (fs) 78 Hz Impedance (Re) 3.7 ohms Coil Inductance (Le) .6 mH Mechanical Q (Qms) 2.3 Electrical Factor (Qes) .38 Total Q (Qts) .32 Comp. Equivalent Vol. (Vas) .31 ft3 / 8.8Liters Voice Coil Overhang (Xmax) 6.3 mm Surface Area of Cone (Sd)m2 0.022m2 Moving Mass (Mms) 33 Grams Reference Efficiency 1.1% Displacement Volume 138 cm3 -
Kicker 10" Solo-Baric L7S
Vendor:KickerThe Kicker 10 inch Solo-Baric L7S is a dual voice coil subwoofer rated at 600 watts RMS and 1,200 watts peak. This listing's Kicker specs are for the 4 ohm dual voice coil model.Key Specs Recommended amplifier power: 600 W RMS, 1,200 W peak Sensitivity: 86.8 dB (1 W/1 m) Frequency response: 24-100 Hz Mounting depth: 6-1/4 in; square cutout 9-5/16 in Sealed enclosure: 1.0 to 1.25 cu ft Vented enclosure: 1.25 to 2.25 cu ft Dual 4-ohm voice coils Fitment and Installation NotesKicker provides a CNC cutout template for the square mounting hole.Browse more motorcycle subwoofers and motorcycle amplifiers at Garage Bagger Stereo.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Precision Power MAS.802HT 8" Horn-Loaded Motorcycle Speakers - Open Box
Vendor:Garage Bagger StereoCondition: Open Box / Return - Never installed. Packaging may show wear.Precision Power MAS.802HT are 8-inch horn-loaded motorcycle speakers designed for Harley touring bikes. Horn-loaded tweeters deliver exceptional high-frequency clarity and projection.Perfect for: Harley fairing or saddlebag installations requiring maximum clarity. -
DS18 PRO-HY69 MSL 6x9" — Hybrid Slim Loudspeaker (Built-in Driver)
Vendor:DS18 Motorcycle AudioThe DS18 PRO-HY69MSL is a 6x9" hybrid slim loudspeaker that pairs a shallow water-resistant paper cone with a built-in 1" titanium-diaphragm compression driver. DS18 lists it for motorcycles, UTVs, Slingshots and Jeeps in fairings, pods or panels. Sold as a single speaker; 2-ohm, 4-ohm and 8-ohm versions exist.Key Specs Power handling: 175W RMS / 350W max Sensitivity: 97 dB (1W/1m) Frequency response: 60 Hz to 20 kHz; recommended high-pass crossover 80 Hz Size: 6.4" x 9.2" without grille; 3.9" overall depth; 3.4" mounting depth Baffle cutout: 5.7" x 8.6" Water-resistant paper cone, treated cloth surround, steel basket, ferrite woofer magnet, neodymium driver magnet IP65 water resistance; grille with sun and water protection cloth included Fitment and Installation NotesDS18 does not list specific motorcycle makes, models or years for this speaker. Check the cutout and the 3.4" mounting depth against your lid, fairing or pod before ordering, and select the impedance that matches your amplifier.Browse more pro coaxial motorcycle speakers and DS18 motorcycle audio, or get a custom build planned around your bike.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
SaleCicada Audio CXX8 Pro Coaxial Speakers 8" (Pair)
Vendor:Cicada AudioCicada Audio CXX8 All Weather 8" Pro Coaxial Driver (2Ω or 4Ω) The Cicada Audio® CXX8.4 is a purpose-built 8-inch Pro Coaxial speaker designed specifically for motorcycle audio systems. Engineered to deliver powerful, detailed sound at high volumes, the CXX8.4 features Cicada Audio®’s exclusive V8™ Dispersion Guide, projecting 360° sound from the tweeter for a wider, more immersive listening experience—even at highway speeds. Built tough with our Rain or Shine™ all-weather performance design, this speaker is ready to handle any ride. The combination of a Kevlar cone, PEI tweeter dome, and N45H neodymium magnet ensures strength, clarity, and high efficiency. The 4-ohm impedance makes it a great match for a wide range of aftermarket motorcycle amplifiers. Specifications: Model: CXX8.4 Impedance: 4Ω Speaker Type: 8″ High-Performance Pro Coaxial Power Handling: 200W RMS / 400W MAX Voice Coils: 2.0-inch (49mm) Midbass / 1.2-inch (31mm) Tweeter Cone Material: Kevlar Tweeter Dome: PEI Magnet Type: Neodymium (N45H) Sensitivity: 93 dB Frequency Response: 50 Hz – 20 kHz (±3 dB) Mounting Depth: 2.7 inches / 69 mm Mounting Diameter: 6.4 in. (163 mm) x 9.2 in. (234 mm) Key Features: V8™ Dispersion Guide – optimized for 360° tweeter projection Rain or Shine™ weatherproof durability 4-ohm impedance – ideal for most aftermarket amps Built-in 6dB crossover PEI tweeter dome – bright, efficient sound dispersion Kevlar cone – ultra-light, moisture-resistant, and durable N45H neodymium magnet – compact, powerful motor structure 2.0-inch copper voice coil – better sound, less heat Custom-tooled polycarbonate basket – UV and heat resistant Backed by a Two (2) Year Cicada Audio® WarrantySale -
SaleDiamond Audio MS82NEO 8" 2-Way Coaxial Neo Speakers (2Ω or 4Ω)
Vendor:Diamond AudioDiamond Audio MS82NEO 8" Pro Coaxial Neo Speakers — 2Ω or 4Ω The Diamond Audio MS82NEO is an 8-inch high-output horn-loaded pro coaxial speaker built for serious motorcycle, marine, and powersports audio systems. Designed to project clean, aggressive output in open-air environments, the MS82NEO combines a rigid carbon-fiber cone, PEN high-frequency diaphragm, neodymium motor structure, and cast-aluminum basket in a purpose-built high-performance platform. Available in 2-ohm and 4-ohm versions and sold in pairs, the MS82NEO is rated at 300 watts RMS / 900 watts MAX per speaker and features a dual-voice-coil, bi-ampable design for advanced amplifier and DSP system configurations. THE REFERENCE STANDARD 8" Pro Coaxial Output for Serious Motorcycle Audio High-efficiency neodymium motors, carbon-fiber cones, horn-loaded high-frequency output, and bi-amp capability make the MS82NEO a serious option for high-output bagger systems. Start a Build Consultation Call 864-334-6131 Diamond Audio MS82NEO Key Specifications Series MS NEO Speaker Size 8 inches Speaker Type 2-Way Horn-Loaded Pro Coaxial 2Ω Model MS82NEO2 4Ω Model MS82NEO4 Sold Pair Power Handling 300W RMS / 900W MAX per speaker Voice Coil Configuration Dual Voice Coil Bi-Ampable Yes Field-Serviceable Voice Coil Yes Cone Material Carbon Fiber High-Frequency Diaphragm PEN (Polyethylene Naphthalate) Motor Neodymium Basket Cast Aluminum Surround Rubber Voice Coil Diameter 2 inches Mounting Depth 3.80″ (96.5 mm) Cutout Diameter 7.01″ (178 mm) Overall Diameter 8.27″ (210 mm) Overall Height 4.16″ (105.7 mm) Fitment warning: These are high-output 8-inch pro coaxial speakers and are not a universal drop-in replacement. Verify cutout diameter, mounting depth, motor clearance, grille clearance, amplifier power, impedance, and complete system layout before ordering. 300W RMS High-Output Pro Coaxial Performance Diamond Audio designed the MS82NEO for systems where conventional coaxial speakers do not provide enough output or projection. The horn-loaded two-way architecture is engineered to maintain strong midrange and high-frequency presence in open-air environments where wind, road, engine, and exhaust noise can overwhelm traditional speakers. Diamond currently rates both the 2-ohm MS82NEO2 and 4-ohm MS82NEO4 at 300 watts RMS / 900 watts maximum per speaker. Carbon-Fiber Cone and Neodymium Motor The MS82NEO uses a rigid carbon-fiber cone designed for fast response, strong midrange output, and controlled midbass performance at elevated volume levels. A high-efficiency neodymium motor structure provides the magnetic strength required for serious output while reducing the weight and physical bulk associated with conventional ferrite motors. Horn-Loaded PEN High-Frequency Driver High-frequency reproduction is handled by a horn-loaded driver using a PEN — polyethylene naphthalate — diaphragm. The horn architecture increases projection and efficiency, helping high-frequency information remain present at highway speeds and in other demanding open-air environments. The MS82NEO is designed as a true high-output coaxial platform rather than a conventional automotive-style coaxial speaker. Choose 2Ω or 4Ω The MS82NEO is available in separate 2-ohm and 4-ohm configurations so the speaker load can be matched correctly to the amplifier, number of speakers, wiring layout, and complete audio system. 2Ω — MS82NEO2 The 2-ohm version is designed for systems where the amplifier and channel configuration are optimized around a lower-impedance load and increased available output. 4Ω — MS82NEO4 The 4-ohm version provides additional flexibility for multi-speaker wiring, bridged amplifier configurations, and systems requiring a higher final impedance. Dual Voice Coil and Bi-Amp Capability Unlike a basic coaxial speaker with a single shared input, the MS82NEO uses a dual-voice-coil, bi-ampable architecture. This provides advanced system builders with additional control over how the speaker is powered and tuned. In properly designed systems, bi-amping can provide independent amplifier and DSP control over different sections of the coaxial platform for more precise crossover, level, EQ, and time-alignment control. System-design note: Bi-amp capability does not mean the speaker must be bi-amped. Wiring and amplifier configuration should be determined by the complete system design, amplifier channels, DSP configuration, and selected 2Ω or 4Ω model. Cast-Aluminum Basket and Field-Serviceable Design The MS82NEO uses a rigid cast-aluminum basket designed to resist flex and vibration under high-output operation. This construction is particularly useful in motorcycle and powersports systems where speaker assemblies are exposed to significant mechanical vibration. Diamond Audio also specifies a field-serviceable voice-coil design, allowing service of critical speaker components without automatically replacing the complete driver assembly. Built for Motorcycle, Marine and Powersports Audio The Diamond Audio MS NEO Series is designed for high-output applications where speaker efficiency, physical size, durability, and projection all matter. The MS82NEO is particularly well suited to custom motorcycle and powersports systems that can accommodate its 8-inch frame and 3.80-inch mounting depth. Harley-Davidson custom audio systems. Road Glide and Street Glide custom speaker installations. Custom saddlebag speaker installations. Tour-pack and fabricated rear speaker locations. Custom fairing and lower-pod applications. Marine audio systems. UTV, Slingshot, and other powersports installations. Installation and Tuning Notes Select the 2Ω or 4Ω version based on amplifier loading and complete system design. Verify amplifier RMS output at the selected speaker impedance. Confirm the 7.01-inch mounting cutout before modifying factory or aftermarket panels. Verify the full 3.80-inch mounting depth and rear motor clearance. Confirm overall 8.27-inch diameter and grille clearance before final assembly. Determine whether the speaker will be conventionally powered or bi-amped before wiring. Use appropriate crossover protection based on the installed power and system configuration. Secure all mounting hardware for motorcycle and powersports vibration. Complete final DSP, crossover, EQ, and level tuning after the entire system is installed. Diamond Audio MS NEO Coaxial Manual Review the Diamond Audio MS NEO coaxial technical information before installation and system configuration. View MS NEO Coaxial Specifications Need Help Choosing 2Ω or 4Ω? The correct MS82NEO version depends on amplifier output, number of speakers, channel configuration, wiring method, DSP strategy, and the complete system design. Garage Bagger Stereo can help determine the correct impedance and amplifier configuration before you order. Start a Build Consultation Call 864-334-6131Sale -
Beyma PRO6FX240ND - 6.5" Pro Carbon Fiber Coaxial Speaker (Single)
Vendor:BeymaBeyma PRO6FX240ND 6.5" Pro Carbon Fiber Coaxial Speaker (Sold in Singles) KEY FEATURES• High power handling: 400 / 80 W Program Power (LF / HF)• High Sensitivity: 94 / 103 dB (LF / HF)• Extended controlled displacement: Xmax 5,5 mm shorting copper pad for low harmonic distortion and linear impedance• Carbon Fiber cone with High-End quality sound CONEX spider for higher resistance and consistency• Common Neodymium magnetic system for low-weight and mounting depth• Excellent off-axis response 70° conical coverage for HF dispersion control• PM4 diaphragm for natural sound Specifications Nominal Basket Diameter 6.5" / 165mm Impedance 8 ohms Low Frequency AES Power Rating 200 Watts Low Frequency Program Power 400 Watts High Frequency AES Power Rating 40 Watts High Frequency Program Power 80 Watts Frequency Response 100Hz - 20kHz High Frequency Sensitivity (1W/1m) 103dB Low Frequency Sensitivity (1W/1m) 94dB LF Voice Coil Diameter 2" / 50.8mm HF Voice Coil Diameter 1.75" / 44.4mm Recom. Crossover Frequency 2.5kHz or higher @ 12dB/oct. Voice Coil Length 14 mm Air Gap Height 7 mm X Damage (peak to peak) 26 mm BL Factor 9.1 N/A Mounting Information Overall Diameter 6.9" / 174mm Bolt Circle Diameter 6.2" / 158mm Baffle Cutout Diameter 5.71" / 145.1mm No. Of Mounting Holes 4 Volume Displaced By Driver 0.02 ft3 / .55 Liters Overall Depth 4.0" / 103.1mm Net Weight 4.2 lb. / 1.9 kg. Shipping Weight 4.6 lb. / 2.1 kg. Materials Low Frequency Woofer Basket Die-Cast Aluminum Cone Carbon Fiber Surround Two Roll Treated Cloth Voice Coil Aluminum Spider Conex Magnet Neodymium High Frequency Tweeter Diaphragm PM-4 Voice Coil Edgewound Aluminum Ribbon Voice Coil Former Kapton Magnet Neodymium Thiele-Small Parameters Resonant Frequency (fs) 100 Hz Impedance (Re) 4.6 ohms Coil Inductance (Le) .24 mH Mechanical Q (Qms) 3.5 Electrical Factor (Qes) .56 Total Q (Qts) .48 Comp. Equivalent Vol. (Vas) .14 ft3 / 4 Liters Voice Coil Overhang (Xmax) 5.5 mm Diaphragm Mass (Mms) 15 Grams Surface Area of Cone (Sd)m2 0.0135m2 Reference Efficiency .83% Displacement Volume (Vd) 74 cm3 -
Beyma 8MND - 8" Midbass/Midrange Speaker (Single)
Vendor:BeymaThe Beyma 8MND is an 8" midbass/midrange speaker sold individually, designed for mid-frequency reproduction in custom audio builds.Key Specs Nominal diameter: 8" (200 mm) Impedance: 4 ohms Power capacity: 100 W RMS Sensitivity: 99 dB (1 W at 1 m) Frequency range: 150 Hz to 7,000 Hz Low harmonic distortion with controlled dispersion up to 7 kHz Pair it with midrange speakers from our Beyma collection, or get help choosing through a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
DB Drive Euphoria XPERT EXW8NCF 8" Carbon Fiber NEO Subwoofer
Vendor:DB DriveThe DB Drive Euphoria XPERT EXW8NCF is an 8" carbon fiber NEO subwoofer with a dual 4 ohm voice coil. It is built for bagger systems that need a compact sub with a weather resistant cone and surround.Key Specs 8" carbon fiber cone, rubber surround, neodymium magnet 2" dual 4 ohm, 4-layer voice coil (3.6 + 3.6 ohm) Die-cast aluminum basket with radial venting, large-gauge compression terminals, PVC gasket Power handling: 1000W, dynamic 2000W Sensitivity: 82.1dB (1W/1m) Browse more motorcycle subwoofers and motorcycle amplifiers, or get a custom build planned around your bike.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
DB Drive EX6NCX 6.5" 2‑Way NEO Loudspeaker
Vendor:DB DriveThe DB Drive EX6NCX is a pair of 6.5" 2-way NEO loudspeakers with a wide-dispersion 1.25" aluminum dome tweeter. DB Drive does not list a specific motorcycle fitment for it.Key Specs Power handling: 225W (450W dynamic), 4 ohm Sensitivity: 97.6dB (1W/1m); response 85Hz-19kHz 2" (51mm) voice coil with neodymium ring magnet IP52 paper cone with treated cloth surround Die-cast aluminum basket with radial venting; grills included Browse more DB Drive and coaxial speakers, or see our custom build options.Not sure what fits your bike? Start a build consultation or call 864-334-6131.
Motorcycle Speakers at a Glance
| Speaker Types | Coaxial, pro coaxial, midrange, mid-bass, component kits and subwoofers |
| Sizes | 6.5", 6x9", 8" and 10" |
| Brands | Cicada Audio, Ground Zero, Diamond Audio, Hertz, DB Drive, DS18, Beyma, PRV Audio, Rockford Fosgate |
| Platforms | Harley-Davidson touring fairings, saddlebag lids and Tour-Pak builds, plus custom baggers |
| Best For | Replacing factory speakers or building a full amplified system |
Summarized from the products in this collection. Confirm your model, year and speaker size on each product page before ordering.
Motorcycle Speakers
This is the full range of motorcycle speakers at Garage Bagger Stereo: coaxial and pro coaxial speakers for simple upgrades, midrange and mid-bass drivers for output and clarity, component kits for 2024-Present Harley-Davidson fairings, and subwoofers for saddlebag and Tour-Pak builds.
Start with the size your bike uses in each location, then choose the speaker type and the amplifier power that matches it.
Shop Speakers by Size and Type
Jump to the part of the build you are working on.
6.5" Speakers
6x9" Speakers
Coaxial Speakers
Pro Coaxial Speakers
Midrange Speakers
Subwoofers
Speaker Installation
Amplifiers
Choosing Motorcycle Speakers
Work through these before you order:
- Speaker size for each location: fairing, saddlebag lid, lower or Tour-Pak
- Impedance, 2 ohm or 4 ohm, so it matches your amplifier wiring plan
- Power handling compared with the amplifier you are using
- Mounting depth and the adapter or ring the speaker needs
- Harley-Davidson model and year, since 2024-Present bikes use their own kits
Not sure what fits your bike? Call us or request a custom build consultation and we will match speakers to your build.
Need Help Choosing Motorcycle Speakers?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.