-
SaleCicada Audio CX69 6x9" Coaxial Speaker (Pair)
Vendor:Cicada Audio6x9" 2Ω or 4Ω High Performance Full-Range Coaxial Speaker The new Cicada Audio CX69.2 speakers are a perfect solution for 2014 and later Harley Fairings. These 6x9 2 or 4 ohm 2-Way Coaxial waterproof speakers are shallow, an easy fit, and do not require an additional tweeter location on the fairing. They simply bolt into the factory speaker locations. Available in 4Ω or 2Ω …the 2Ω get more output with smaller higher efficiency / lower output amplifiers and don’t NEED a giant “current hog” for an amplifier to drive these. Specs: 125WRMS/250MAX Power Handling- EACH Frequency Response: 53Hz -20Khz+/-5dB Neodymium High Energy/ Light Weight N35 Magnet structure Waterproof IMPP Cone with NBR surrounds Heavy Duty/ Injected High-Temp Polymer Frame. 1.4” 2Ω or 4Ω – High Temp Voice Coil (Black Coat™) Voice Coil MidBass Shortening Ring for the Ultimate in Speaker Control 1.0” PEI dome tweeter with Neodymium magnet DPSH ® “Dual-Phase Slot Horn” Advanced Voice Coil Heat Sink Design for Better Heat Dissipation High Sensitivity: 934dB 1W/1M Average (1W/1M – 2.83V) Built in 6dB Crossover Low Profile Design / Easy Fit Mounting Depth: 2.55” / 64.8mm Mounting Diameter: 5.77” X 8.5” / 145.5mm X 215.9mm Outside Dimensions: 6.4” X 9.2” / 126.56mm X 233.7mm SOLD IN PAIRS Weather treatedSale -
SaleCicada Audio CXK69 - 6X9-inch Mid-Bass 2 Way Component Speaker Kit (2Ω or 4Ω)
Vendor:Cicada AudioCicada Audio CXK69 (2Ω or 4Ω) 6X9-inch Mid-Bass 2-Way Component Speaker Kit Fits 6x9 lids for 14-23 Does not fit 23.5-24 HD Lids MID-BASS FEATURES Rain or Shine™ all-weather performance design OFC Copper shorting ring for extended high-frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high-temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die-cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty MID_BASS SPECIFICATIONS 2Ω / 6X9-inch mid-bass driver 4Ω / 6X9-inch mid-bass driver Power Handling: 250W RMS / 500W MAX Voice Coil: 2-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 10 kHz +/- 3 dB Mounting Depth: 3.26-inch/83mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm TWEETER FEATURES Rain or Shine™ all-weather performance design The aluminum tweeter dome diaphragm delivers brighter sound and maximized efficiency OFC Copper wire voice coil offers great sound while generating less heat Custom tooled, vented, encased external crossover Field replaceable diaphragm Aluminum die-cast custom tooled backplate N35SH Neodymium magnet motor Two (2) year warranty TWEETER SPECIFICATIONS 4Ω / 1-inch shallow ring radiator horn tweeter Power Handling: 50W RMS / 100W MAX Voice Coil: 1-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12 dB @ 7 kHz Magnet: Neodymium Sensitivity: 101 dB, 1W / 1M Frequency Response: 2 kHz – 20 kHz +/- 3 dB Mounting Depth: 1.1-inch/28mm Mounting Diameter: 2-inch/50.8mmSale -
SaleCicada Audio CXX57 5x7" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CXX57 High-Performance Full-Range 5×7-inch Pro Coaxial (2Ω or 4Ω) New to our mid-line series, the CXX57.2 is a drop-in replacement 5″ x 7″ bag lid speaker featuring a 1.4″, 2Ω, voice coil woofer and a 1″ PEI, 4Ω, tweeter. This model can be operated as a coaxial or is bi-ampable for a direct replacement on the Boom 2 system FEATURES: Designed for 1998 to 2023 H-D® factory designed locations Power handling: 125W RMS/250W MAX V8™ Dispersion Guide Exclusive Cicada Design for 360o sound from tweeter N45H Neo Magnets All weather design for Rain or Shine™ Bi-Amp ready for OEM Hook up for H-D® Boom 2® System Switchable built-In 6dB crossover Available in 4- or 2-Ohm versions PEI – (High temp polymer dome) tweeter diaphragm material Brighter sound More efficient Moisture resistant Kevlar cone Extremely light / rigid / moisture resistant Maximized efficiency Hi-Temperature Polycarbonate custom tooled basket All surfaces have UV protection Warranty: 2 yearsSale -
SaleCicada Audio CXX65 6.5" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CXX65 High-Performance Full-Range 6.5-inch Pro Coaxial SPECS: 100 WRMS/ 200 MAX Power Handling Frequency Response: 55Hz -20Khz+/-3dB Neodymium High Energy/ Light Weight N35 Magnet structure Waterproof IMPP Cone with NBR surrounds Heavy Duty/ Injected High Temp Polymer Frame Voice Coils: 1.4-inch/35mm mid-bass and 1-inch/25mm Tweeter Kevlar Cone Tweeter Dome: PEI Shortening Ring for the Ultimate in speaker control 1.0” PEI dome tweeter with Neodymium magnet DPSH ® “Dual-Phase Slot Horn” Advanced Voice Coil Heat Sink Design for Better Heat Dissipation High Sensitivity: 93dB 1W/1M Average (1W/1M – 2.83V) Built-in 6dB Crossover Low Profile Design / Easy Fit Mounting Depth: 2.26” / 57.4mm Mounting Diameter: 5.32” / 135.1mm Outside Dimensions: 6.5” / 165mm SOLD IN PAIRS Weatherproof Speakers Designed for 2014 + H-D® factory designed locations V8™ Dispersion Guide Exclusive Cicada Design for 360o sound from tweeter Rain or Shine™ all-weather performance design Built-in 6dB crossover PEI tweeter dome for best sound dispersion Moisture resistant Brighter sound More efficiency Kevlar cone Extremely lightweight and strong Moisture resistant Maximized efficiency Copper wire voice coils offer great sound while generating less heat N45H Neo Magnets High-temperature resistant Polycarbonate custom tooled basket UV protection over all surfaces 5-inch Grills and Hardware are included Two (2) year warrantySale -
SaleCicada Audio CXX69 6x9" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CXX69 High-Performance Full-Range 6x9" Pro Coaxial Speakers SPECS: 4Ω and 2Ω / 6X9-inch high performance coaxial driver Power handling: 200W RMS/400W MAX Voice Coils: 2.0-inch/49mm Mid-bass and 1.2-inch/31mm Tweeter Cone: Kevlar Tweeter Dome: PEI Magnet: Neodymium Sensitivity: 93dB Frequency response 50 Hz– 20 kHz +/- 3dB Mounting Depth: 2.7-inch/69mm Mounting Diameter: 6.4-inch/163mm X 9.2-inch/234mm FEATURES: V8™ Dispersion Guide Exclusive Cicada Design for 360o sound from tweeter Rain or Shine™ all-weather performance design Built-in 6dB crossover Available in 4- or 2-Ohm versions PEI tweeter dome for best sound dispersion Moisture resistant Brighter sound More efficiency Kevlar cone Extremely lightweight and strong Moisture resistant Maximized efficiency Copper wire voice coils offer great sound while generating less heat N45H Neo Magnets High-temperature resistant Polycarbonate custom tooled basket UV protection over all surfaces Two (2) year warrantySale -
Cicada Audio CXX8 Pro Coaxial Speakers 8" (Pair)
Vendor:Cicada AudioCicada Audio CXX8 All Weather 8" Pro Coaxial Driver (2Ω or 4Ω) The Cicada Audio® CXX8.4 is a purpose-built 8-inch Pro Coaxial speaker designed specifically for motorcycle audio systems. Engineered to deliver powerful, detailed sound at high volumes, the CXX8.4 features Cicada Audio®’s exclusive V8™ Dispersion Guide, projecting 360° sound from the tweeter for a wider, more immersive listening experience—even at highway speeds. Built tough with our Rain or Shine™ all-weather performance design, this speaker is ready to handle any ride. The combination of a Kevlar cone, PEI tweeter dome, and N45H neodymium magnet ensures strength, clarity, and high efficiency. The 4-ohm impedance makes it a great match for a wide range of aftermarket motorcycle amplifiers. Specifications: Model: CXX8.4 Impedance: 4Ω Speaker Type: 8″ High-Performance Pro Coaxial Power Handling: 200W RMS / 400W MAX Voice Coils: 2.0-inch (49mm) Midbass / 1.2-inch (31mm) Tweeter Cone Material: Kevlar Tweeter Dome: PEI Magnet Type: Neodymium (N45H) Sensitivity: 93 dB Frequency Response: 50 Hz – 20 kHz (±3 dB) Mounting Depth: 2.7 inches / 69 mm Mounting Diameter: 6.4 in. (163 mm) x 9.2 in. (234 mm) Key Features: V8™ Dispersion Guide – optimized for 360° tweeter projection Rain or Shine™ weatherproof durability 4-ohm impedance – ideal for most aftermarket amps Built-in 6dB crossover PEI tweeter dome – bright, efficient sound dispersion Kevlar cone – ultra-light, moisture-resistant, and durable N45H neodymium magnet – compact, powerful motor structure 2.0-inch copper voice coil – better sound, less heat Custom-tooled polycarbonate basket – UV and heat resistant Backed by a Two (2) Year Cicada Audio® Warranty -
SaleCicada Audio DSP600.4D DSP 600w 4 CH Amplifier
Vendor:Cicada AudioMotorcycle Amplifier + DSP Cicada Audio DSP600.4D — Compact 4-Channel Power with Built-In DSP Clean power + smart control. The DSP600.4D packs a 4-channel class-D amp and a flexible DSP into a compact, bike-ready chassis. Dial in PEQ, high/low-pass filters up to 20 kHz, and steep slopes (up to 48 dB) so your Harley-Davidson® or Indian® system stays loud and clear at highway speed. Why Riders Choose It Built-in DSP — 8-band PEQ, HPF/LPF to 20 kHz, slopes 6/12/18/24/48 dB. Serious output — up to 152×4 @ 2Ω or 300×2 bridged @ 4Ω (14.4V). Compact chassis — fits cleanly behind fairings or in bags. Bike-ready — designed for motorcycle use. Plays nice with stock radios — easy gain structure and integration. Shop Motorcycle Amplifiers Best With Efficient front speakers (6.5″/horns) at 2–4Ω Rear lids or mid-bass channels with tailored PEQ & HPF/LPF Bridged 4Ω pairs for higher output OFC wiring, proper fusing, and careful gain setup Tell us your bike and speakers — we’ll pre-map crossovers, slopes, and PEQ to your setup. Key Specifications RMS Power @ 4Ω (12.5V / 14.4V) 70 × 4 / 92 × 4 RMS Power @ 2Ω (12.5V / 14.4V) 115 × 4 / 152 × 4 Bridged @ 4Ω (12.5V / 14.4V) 218 × 2 / 300 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor 91 dB / 200 DSP Crossovers HPF/LPF 0–20 kHz; slopes 6/12/18/24/48 dB DSP PEQ 8 bands; Q 0.05–20 Operating Voltage 8 – 16 V Current Draw (Music / Max) 40 A / 80 A Recommended Fuse 40 A Efficiency ~79% Dimensions (L × W × H) 8.875″ × 4.0″ × 1.4″ (225.4 × 103 × 36 mm) Specs from Cicada’s product page and manual. Always verify impedance/wiring before power-on. Frequently Asked Questions — Motorcycle Audio Can I power fronts and lids with one amp? Yes, many builds run all four channels. Use the DSP to set independent HPF/LPF and PEQ per pair for clean, balanced output. Will it work with my factory radio? Yes — it integrates cleanly. Set gains carefully and use the DSP to correct the factory curve. Add a dedicated DSP if you need time alignment. Can I bridge for more power? Yes — bridge pairs at 4Ω for up to 300 W × 2 (14.4V). Enable LPF when driving mid-bass or a small sub. What wiring and fuse do I need? Use OFC power/ground sized for the current draw, fused at the battery (40 A). Keep grounds short with solid chassis bonding. Is it weather resistant? It’s designed for motorcycles. Mount away from direct spray and protect cables from abrasion and heat. Garage Bagger Stereo Advantage Bike-specific DSP presets on request Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and phone support Need Help? Call us at (864) 334-6131 with your bike, speakers, and goals. We’ll map crossovers, EQ, and gains for your exact setup.Sale -
SaleCicada Audio DSP88V2 Digital Sound Processor
Vendor:Cicada AudioCicada Audio DSP88V2 Harley Davidson Digital Sound Processor DSP 8 CHANNEL IN / 8 CHANNEL OUT This DSP Processor has a great “form factor” as it can sit on the radio or under the left/right bike fairing substructure. Software Phone/Tablet APP and PC APP make this small-size package a WINNER. It easily fits into the fairing of any Harley Bagger 1998 – 2024. DSP88v2 – 8 CHANNEL DSP PROCESSOR – 8 IN/8 OUT Signal Input: 8 High-Low Level Inputs Signal Output: 8 RCA Outputs Output Impedance: 200 Ohms Frequency Response: 20Hz – 20kHz +/- 0.5Db Input Voltage: 0.02V – 12V Input Impedance: 20k Ohms Output Voltage: Up to 8V (Unity gain 4V gets UP to 4 V out, 2 V in gets UP to 2 V out, etc.) THD+N: <1.0% Signal-to-Noise: >100 dBA (A-weighted) Digital Signal Processing (DSP):Speed: 147 MIPS Precision: 32-Bit Accumulators: 72-bit Digital to Analog (DAC): Precision: 24-Bit Dynamic Range: 108 dB THD+N: -98 dB Analog to Digital (ADC): Precision: 24-Bit Dynamic Range: 105 dB THD+N: -98 dB Operating Voltage: 9 – 16 VDC Crossover Frequency: Variable: 20 Hz to 10 kHz Crossover Slope: Selectable Slope: 6/12/18/24/36/48 dB/Octave EQ Frequency Controls: Selectable Q: 0.05 to 20.0 Dimensions (H x W x D): 1.26″ x 4.04″ x 5.12″ (32 mm x 102.5 mm x 130 mm) Installation Manual Windows Software Cicada Audio’s patented Bluetooth digital signal processor allows you to do DSP tuning and signal summing via the app and using the downloadable CA DSP app on your smartphone or tablet. You can upload saved system settings from one DSP88 and load it into a different DSP88v2. (Think of the possibilities!)Sale -
SaleCicada Audio FLX1000.4 Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX1000.4 — Compact 4-Channel Power for Bagger Audio Big output in a small chassis. The FLX1000.4 feeds your front + rear speakers real power from a palm-size, bike-ready amp. Flexible HPF/LPF crossovers, REM/DC turn-on, and clean tuning make it a favorite for Harley-Davidson® and Indian® builds that need highway-clear sound without bulky gear. Why Riders Choose It Serious output — up to 254×4 @ 2Ω or 530×2 bridged @ 4Ω (14.4V). Compact chassis — 6.0″ × 4.9″ × 2.0″ fits behind fairings or in bags. Bike-ready — designed for the motorcycle environment. Flexible turn-on — REM / DC options for easy integration. On-board crossovers — HPF / FULL / LPF 30–300 Hz, 12 dB/oct. Shop Motorcycle Amplifiers Best With Front & rear speakers at 2–4Ω Bridged 4Ω pairs for lids or mid-bass OFC wiring with correct fusing and clean grounds Factory radio or DSP — we’ll map gains & filters Tell us your bike and speakers — we’ll set crossover points and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (12.5V / 14.4V) 150 × 4 / 168 × 4 RMS Power @ 2Ω (12.5V / 14.4V) 220 × 4 / 254 × 4 Bridged @ 4Ω (12.5V / 14.4V) 461 × 2 / 530 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor 91 dB / 200 Crossovers HPF / FULL / LPF: 30–300 Hz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 8 – 16 V Current Draw (Music / Max) 60 A / 116 A Recommended Fuse (Music) 120 A Efficiency ~79% Dimensions (L × W × H) 6.0″ × 4.9″ × 2.0″ (152 × 124 × 51 mm) Specs from Cicada’s product page; retailer listings corroborate ratings and dimensions. Always verify wiring/impedance before power-on. Frequently Asked Questions — Motorcycle Audio Can it run fronts and lids with one amp? Yes — many builds run four channels at 2–4Ω. Use HPF/LPF and proper gains for clean balance. Will it work with my factory radio? Yes. Use REM or DC turn-on and set gains carefully. Add a DSP if you need advanced EQ/time alignment. Can I bridge it for more power? Yes — bridge pairs at 4Ω for up to ~530 W × 2 (14.4V). Use LPF for mid-bass or small sub duty. What wiring and fuse do I need? Use OFC power/ground sized for current draw; fuse at the battery (120 A music rec.). Keep grounds short and solid. Is it motorcycle-ready? Yes — designed for bikes. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131 with your bike and speakers. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX1400.4 Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX1400.4 — High-Output 4-Channel Power for Bagger Audio More headroom, same compact footprint. The FLX1400.4 drives front + rear speakers with authority from a bike-ready chassis that tucks neatly behind fairings or in bags. Flexible HPF/LPF crossovers, REM/DC turn-on, and clean tuning make it a go-to for Harley-Davidson® and Indian® builds that demand highway-clear output. Why Riders Choose It Serious output — four strong channels or bridged pairs for lids/mid-bass. Compact chassis — mounts cleanly on touring platforms. Bike-ready — designed for the motorcycle environment. Flexible turn-on — REM / DC integration. On-board crossovers — HPF / FULL / LPF 30–300 Hz, 12 dB/oct. Shop Motorcycle Amplifiers Best With Front & rear speakers at 2–4Ω Bridged 4Ω pairs for lids or mid-bass OFC wiring, correct fusing, and solid grounds Factory radio or DSP — we’ll map gains & filters Tell us your bike and speakers — we’ll set crossover points and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (14.4V) ≈ 200 × 4 RMS Power @ 2Ω (14.4V) ≈ 350 × 4 Bridged @ 4Ω (14.4V) ≈ 700 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor ≈ 91 dB / 200 Crossovers HPF / FULL / LPF: 30–300 Hz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 8 – 16 V Current Draw (Music / Max) ≈ 70 A / 130 A Recommended Fuse (Music) ≈ 150 A Dimensions Compact motorcycle-grade chassis Always verify impedance, wiring, and fuse size for your exact setup. Frequently Asked Questions — Motorcycle Audio Can it power fronts and lids cleanly? Yes — run four channels at 2–4Ω for a balanced system, or bridge pairs at 4Ω for more output to lids or mid-bass. Will it work with my factory radio? Yes. Use REM or DC turn-on and set gains carefully. Add a DSP if you need advanced EQ/time alignment. What wiring and fuse do I need? Use OFC power/ground sized for current draw; fuse at the battery (≈150 A music). Keep grounds short and solid. Is it motorcycle-ready? Yes — designed for bikes. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131 with your bike and speakers. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX1400.4P Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX1400.4P — High-Output 4-Channel Power for Bagger Audio More headroom, same compact footprint. The FLX1400.4P drives front + rear speakers with authority from a bike-ready chassis that tucks neatly behind fairings or in bags. Flexible HPF/LPF crossovers, REM/DC turn-on, and clean tuning make it a go-to for Harley-Davidson® and Indian® builds that demand highway-clear output. Why Riders Choose It Serious output — four strong channels or bridged pairs for lids/mid-bass. Compact chassis — mounts cleanly on touring platforms. Bike-ready — designed for the motorcycle environment. Flexible turn-on — REM / DC integration. On-board crossovers — HPF / FULL / LPF 30–300 Hz, 12 dB/oct. Shop Motorcycle Amplifiers Best With Front & rear speakers at 2–4Ω Bridged 4Ω pairs for lids or mid-bass OFC wiring, correct fusing, and solid grounds Factory radio or DSP — we’ll map gains & filters Tell us your bike and speakers — we’ll set crossover points and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (14.4V) ≈ 200 × 4 RMS Power @ 2Ω (14.4V) ≈ 350 × 4 Bridged @ 4Ω (14.4V) ≈ 700 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor ≈ 91 dB / 200 Crossovers HPF / FULL / LPF: 30–300 Hz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 8 – 16 V Current Draw (Music / Max) ≈ 70 A / 130 A Recommended Fuse (Music) ≈ 150 A Dimensions Compact motorcycle-grade chassis Always verify impedance, wiring, and fuse size for your exact setup. Frequently Asked Questions — Motorcycle Audio Can it power fronts and lids cleanly? Yes — run four channels at 2–4Ω for a balanced system, or bridge pairs at 4Ω for more output to lids or mid-bass. Will it work with my factory radio? Yes. Use REM or DC turn-on and set gains carefully. Add a DSP if you need advanced EQ/time alignment. What wiring and fuse do I need? Use OFC power/ground sized for current draw; fuse at the battery (≈150 A music). Keep grounds short and solid. Is it motorcycle-ready? Yes — designed for bikes. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131 with your bike and speakers. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX1600.1 Amplifier
Vendor:Cicada AudioMotorcycle Amplifier — Mono Cicada Audio FLX1600.1 — High-Output Mono Power for Bagger Audio One channel, no compromise. The FLX1600.1 is a mono full-range workhorse for high-output lids, mid-bass, or a compact sub. It packs serious wattage into a compact, bike-ready chassis with HPF/LPF control and clean integration on Harley-Davidson® and Indian® touring platforms. Why Riders Choose It Serious output — up to 1600 × 1 @ 2Ω (14.4V). Compact chassis — 8.6″ × 4.9″ × 2.0″ tucks behind fairings/bags. Bike-ready — element-ready design for motorcycle use. Flexible turn-on — REM / DC integration. On-board crossovers — HPF 10–80 Hz; LPF 80 Hz–20 kHz, 12 dB/oct. Shop Motorcycle Amplifiers Best With High-output lids or mid-bass at 2–4Ω Compact 4Ω subwoofer (enable LPF) OFC wiring & correct fusing; careful gain setup Factory radio or DSP front-end Tell us your bike and speakers — we’ll map crossovers, slopes, and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (12.5V / 14.4V) 670 × 1 / 950 × 1 RMS Power @ 2Ω (12.5V / 14.4V) 1250 × 1 / 1600 × 1 Frequency Response 10 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor 86 dB / 200 Crossovers HPF 10–80 Hz; LPF 80 Hz–20 kHz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 9 – 16 V Current Draw (Music / Max) 70 A / 140 A Recommended Fuse (Music) 100 A Efficiency ~80% Gain Range 0.2 – 12 V Dimensions (L × W × H) 8.6″ × 4.9″ × 2.0″ (218 × 124 × 51 mm) Specs from Cicada’s product page; multiple dealers corroborate power ratings and crossover ranges. Always verify wiring/impedance before power-on. Frequently Asked Questions — Motorcycle Audio Is this for subs or mids? Both. It’s a mono full-range design. Use HPF for mid-bass/lids or LPF for a compact sub. We’ll help you choose the right filter points. Will it work with my factory radio? Yes — use DC or REM turn-on and set gains carefully. Add DSP if you need advanced EQ or time alignment. What wiring and fuse should I use? Use OFC wire sized for current draw and fuse at the battery (100 A music). Keep grounds short with solid chassis bonding. Is it motorcycle-ready? Yes — element-ready construction. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131. We’ll map gains, filters, and wiring for your exact setup.Sale
-
3 Year Product Repair under $2,000.00 (Accidental, Prepaid Shipping)
Vendor:Consumer Priority Service -
3 Year Product Repair under $2,500.00 (Accidental, Prepaid Shipping)
Vendor:Consumer Priority Service -
3 Year Product Repair under $250.00 (Accidental, Prepaid Shipping)
Vendor:Consumer Priority Service -
3 Year Product Repair under $3,000.00 (Accidental, Prepaid Shipping)
Vendor:Consumer Priority Service
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.