-
Cicada Audio 24FLXCHX-4X4RG 1400W 4-Speaker System for 2024+ Road Glide
Vendor:Cicada AudioCOMPLETE 2024+ ROAD GLIDE AUDIO SYSTEM Cicada Audio 24FLXCHX-4X4RG 1400W 4-Speaker Audio System The Cicada Audio 24FLXCHX-4X4RG is a complete front-and-rear audio system for compatible 2024 and newer Harley-Davidson Road Glide motorcycles. It combines a high-output four-channel amplifier, four 2-ohm Pro Coaxial Horn speakers, A2B factory-radio integration, Road Glide-specific mounting components and the wiring required to connect the system. See Everything Included View Speaker Load Complete Front and Rear Upgrade Designed for compatible 2024+ Road Glide motorcycles FLX1400.4 four-channel Class-D amplifier 350 watts RMS × 4 channels at 2Ω and 14.4 volts Standard amplifier without built-in DSP Four 2Ω Pro Coaxial Horn speakers Two 6.5-inch fairing speakers Two 6×9-inch saddlebag speakers NAV-TV ZEN-H A2B factory-radio integration Road Glide amplifier rack and wiring included 6×9 saddlebag lid cut-in mounting system 24FLXCHX-4X4RG Complete System Overview This manufacturer-matched Cicada Audio package combines the amplifier, speakers, factory-radio interface, power wiring, speaker wiring and Road Glide-specific mounting components needed for a four-channel motorcycle audio upgrade. Two CHX65.2 6.5-inch Pro Coaxial Horn speakers install in the Road Glide fairing. Two CHX69.2 6×9-inch Pro Coaxial Horn speakers install in the factory saddlebag lids using the included 24CHDLID cut-in mounting system. All four speakers are 2-ohm models. Each speaker connects to an individual channel of the FLX1400.4 amplifier, creating a 2-ohm nominal load on each of the amplifier’s four channels. Standard Non-DSP Amplifier Configuration FLX1400.4 Power Amplifier This package includes the standard Cicada Audio FLX1400.4 four-channel amplifier. It provides high-output Class-D power but does not contain an integrated digital signal processor. NAV-TV ZEN-H A2B Integration The included NAV-TV ZEN-H interface and Cicada Audio harness extract the factory A2B audio signal and provide direct-connect amplifier integration without cutting the factory signal harness. No built-in DSP: This 24FLXCHX system uses the standard FLX1400.4 amplifier. It should not be confused with Cicada systems using the FLX1400.4PRO amplifier with an integrated DSP. Speaker Impedance and Amplifier Channel Load Front Fairing: 2Ω The package includes one pair of CHX65.2 6.5-inch Pro Coaxial Horn speakers. Each front speaker has a nominal impedance of 2 ohms. Rear Saddlebags: 2Ω The package includes one pair of CHX69.2 6×9-inch Pro Coaxial Horn speakers. Each rear speaker has a nominal impedance of 2 ohms. Amplifier Load: 2Ω × 4 One speaker is connected to each amplifier channel, presenting a 2-ohm nominal load to each of the four channels. Front Left Channel One CHX65.2 speaker — 2Ω Front Right Channel One CHX65.2 speaker — 2Ω Rear Left Channel One CHX69.2 speaker — 2Ω Rear Right Channel One CHX69.2 speaker — 2Ω Final Intended Load 2Ω nominal per amplifier channel Speaker impedance: This package does not include selectable 4-ohm speaker versions. All four supplied speakers are 2-ohm models matched to the FLX1400.4 amplifier’s 2-ohm stereo output. Everything Included in the Complete System FLX1400.4 — 1400W Four-Channel Amplifier One compact Class-D amplifier rated for up to 350 watts RMS × 4 channels at 2 ohms and 14.4 volts. This is the standard FLX1400.4 model without built-in DSP. CHX65.2 — 6.5" Pro Coaxial Horn Speakers One pair of 2-ohm CHX65.2 speakers for the Road Glide fairing. Each speaker is rated for 300 watts RMS and includes an external 12dB crossover with optional tweeter attenuation. CHX69.2 — 6×9" Pro Coaxial Horn Speakers One pair of 2-ohm CHX69.2 speakers for the rear saddlebag lids. Each speaker is rated for 400 watts RMS and includes an external 12dB crossover with optional tweeter attenuation. 24CHDRGG — Road Glide Fairing Grilles One pair of Cicada Audio branded, powder-coated steel fairing grilles engineered for compatible 2024 and newer Road Glide models. 24CHDLID — 6×9" Saddlebag Lid Cut-In Kit A complete left-and-right saddlebag lid mounting system with angled top-load baffles, powder-coated steel grilles, gasketed clamping rings and precision cutout templates. HDPG4K — 4-AWG Amplifier Installation Kit Includes six-foot 4-AWG power and ground cables, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring, a waterproof Mini-ANL fuse holder and multiple fuse values. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface Kit NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect harness and correctly pinned Molex connections for compatible Cicada amplifiers. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, two short extensions and two longer speaker-wire leads for routing amplifier output to the saddlebags. 24HDAR-RG — Road Glide Amplifier Rack Black-anodized aluminum amplifier rack that uses compatible Road Glide OEM amplifier mounting locations. Predrilled FLX amplifier mounting positions and installation hardware are included. FLX1400.4 Amplifier Power 350W × 4 at 2Ω At 14.4 volts, the amplifier produces up to 350 watts RMS on each of its four channels into the included 2-ohm speakers. 225W × 4 at 4Ω The amplifier also supports four-channel 4-ohm operation, although this complete system includes 2-ohm speakers. 700W × 2 Bridged at 4Ω The amplifier supports bridged operation with compatible 4-ohm loads, but this complete package uses four-channel stereo operation. Wide Input Range A 0.2V–12V input sensitivity range supports compatible factory-radio interfaces and aftermarket signal sources. Built-In Crossovers Selectable low-pass, full-range and high-pass modes provide 30Hz–300Hz adjustment with a 12dB-per-octave slope. Compact FLX Chassis The compact aluminum chassis installs on the included Road Glide rack for a secure, vehicle-specific fairing installation. FLX1400.4 Amplifier Specifications Amplifier Model FLX1400.4 Amplifier Type Four-channel Class-D amplifier without built-in DSP Output at 2Ω / 14.4V 350W RMS × 4 channels Output at 2Ω / 12.5V 300W RMS × 4 channels Output at 4Ω / 14.4V 225W RMS × 4 channels Output at 4Ω / 12.5V 200W RMS × 4 channels Bridged Output at 4Ω / 14.4V 700W RMS × 2 channels Bridged Output at 4Ω / 12.5V 600W RMS × 2 channels Frequency Response 20Hz–20kHz ±3dB Operating Voltage 8V–16V Music Current Draw 50A Maximum Current Draw 220A Manufacturer Recommended Fuse 120A Efficiency 79% Damping Factor 200 Signal-to-Noise Ratio 91dB Input Sensitivity 0.2V–12V Turn-On Modes Remote or DC offset Crossover Modes LPF / FULL / HPF Crossover Range 30Hz–300Hz Crossover Slope 12dB per octave Overall Dimensions 7.9 × 4.9 × 2.0 inches / 200 × 125 × 51mm Chassis Dimensions 6.625 × 4.9 × 2.0 inches / 168 × 125 × 51mm CHX65.2 Front Fairing Speakers Model CHX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch Pro Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 300W RMS / 600W maximum per speaker Mid-Bass Voice Coil 2 inches / 51mm Tweeter Voice Coil 1.4 inches / 35.56mm Cone Carbon Matrix Composite™ Tweeter Dome Aluminum Magnet N35SH neodymium Sensitivity 92dB Frequency Response 70Hz–20kHz ±4dB Mounting Depth 2.64 inches / 67mm Mounting Diameter 5.67 inches / 144mm External Crossover 12dB with optional -3dB / -6dB tweeter attenuation CHX69.2 Rear Saddlebag Speakers Model CHX69.2 Quantity Two speakers / one pair Speaker Type 6×9-inch Pro Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 400W RMS / 800W maximum per speaker Mid-Bass Voice Coil 2.5 inches / 64mm Tweeter Voice Coil 1.75 inches / 44mm Cone Carbon Matrix Composite™ Tweeter Dome Aluminum Magnet N35SH neodymium Sensitivity 92dB, 1W / 1M Frequency Response 46Hz–20kHz ±3dB Mounting Depth 3.75 inches / 96mm Mounting Diameter 5.7 × 8.5 inches / 145 × 216mm External Crossover 12dB with optional -3dB / -6dB tweeter attenuation 24CHDLID Saddlebag Lid System The included 24CHDLID is a complete cut-in system designed to convert compatible factory saddlebag lids into reinforced, rider-focused 6×9-inch speaker locations. Left and right angled top-load 6×9-inch speaker baffles Heavy-duty powder-coated steel speaker grilles Secure clamping rings with waterproof gaskets High-strength ASA molded construction ABS molded saddlebag lid cutout templates Heavy-duty replacement lid gasket seals Rainproof lid covers Cicada lid tethers with crossover-storage pouches Die-cut speaker gasketing Permanent lid modification required: Both factory saddlebag lids must be cut using the templates supplied with the 24CHDLID mounting system. Plug-and-Play A2B Integration The included NAV-TV ZEN-H interface extracts the factory digital A2B audio signal. The Cicada direct-connect harness routes that signal into the FLX1400.4 amplifier through correctly pinned locking connectors. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Correctly pinned Molex amplifier connections OEM-grade positive-locking connectors Compact routing inside the Road Glide fairing Automotive-grade construction for motorcycle use Road Glide-Specific Amplifier Mounting The included 24HDAR-RG amplifier rack is designed around compatible OEM amplifier mounting locations inside the 2024 and newer Road Glide fairing. Road Glide-specific amplifier mounting platform Uses compatible OEM amplifier mounting locations Black-anodized aluminum construction Predrilled holes for Cicada FLX-style amplifiers Amplifier-rack mounting hardware included Supports a clean and secure fairing installation Plug-and-Play Versus Cut-In Installation Direct-Fit Components The A2B interface harness, amplifier input connection, rear-output harness and Road Glide amplifier rack use vehicle-specific connectors and mounting points to reduce custom wiring and fabrication. Cut-In Components The rear CHX69.2 speaker installation requires permanent cutting of both factory saddlebag lids using the templates and baffles supplied with the 24CHDLID system. Installation clarification: This is a complete, vehicle-specific integration system, but it is not a completely no-modification installation because the rear saddlebag lid speakers require permanent lid cutting. Complete System Specifications Complete System SKU 24FLXCHX-4X4RG Vehicle Application Compatible 2024 and newer Harley-Davidson Road Glide Amplifier FLX1400.4 four-channel amplifier without built-in DSP Amplifier Output 350W RMS × 4 at 2Ω and 14.4 volts Total Speaker Count Four Pro Coaxial Horn speakers Front Speakers Two CHX65.2 6.5-inch speakers Rear Speakers Two CHX69.2 6×9-inch speakers Speaker Impedance All four speakers are 2Ω Intended Channel Load 2Ω nominal per amplifier channel Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada direct-connect harness Built-In DSP No Front Grilles 24CHDRGG Road Glide fairing grilles Rear Lid System 24CHDLID 6×9-inch cut-in mounting kit Power Wiring HDPG4K 4-AWG amplifier installation kit Rear Speaker Wiring 24HDRO plug-and-play rear-output harness Amplifier Rack 24HDAR-RG Road Glide amplifier mounting rack Shopify Variants None Electrical and Fuse Requirements Confirm the final fuse selection: The FLX1400.4 amplifier documentation lists a recommended 120-amp fuse. The included HDPG4K power kit is supplied with 60-, 80- and 100-amp fuses. Confirm the correct protection value using current Cicada Audio installation guidance before powering the amplifier. Use the included HDPG4K 4-AWG power and ground wiring. Install the correctly rated main fuse close to the battery connection. Do not substitute a larger fuse than the wiring and system can safely support. Use clean, secure and properly prepared power and ground connections. Confirm the motorcycle battery is in good operating condition. Evaluate charging-system capacity before extended high-output use. Protect all wiring from heat, sharp edges and moving components. Secure the amplifier and wiring against motorcycle vibration. Professional electrical installation is strongly recommended. Fitment and Ordering Notes Verify fitment: Confirm the exact Road Glide year, trim, factory radio, factory amplifier configuration, saddlebag style and electrical system before ordering. Designed for compatible 2024 and newer Road Glide motorcycles. The package includes four 2-ohm speakers. The package does not include selectable 4-ohm speaker variants. The amplifier uses one speaker on each of its four channels. The FLX1400.4 amplifier does not include built-in DSP. The A2B interface supports direct factory-radio signal integration. The rear-output harness routes amplifier output to the saddlebags. The factory saddlebag lids require permanent cutting. Amplifier gain and crossover setup are required. Professional installation is strongly recommended. Best For Compatible 2024+ Road Glide audio upgrades Four-speaker front-and-rear motorcycle audio systems Factory A2B radio systems requiring aftermarket integration High-output 2-ohm Pro Coaxial Horn speaker systems Riders adding 6×9-inch speakers to factory saddlebag lids Systems using a standard four-channel amplifier without built-in DSP Professional Road Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCHX-4X4RG FAQ What ohm speakers come with this system? All four included speakers are 2-ohm models. The front pair is CHX65.2, and the rear saddlebag pair is CHX69.2. What load does the amplifier see? Each amplifier channel powers one 2-ohm speaker. The intended system configuration therefore presents a 2-ohm nominal load to each of the amplifier’s four channels. How much power does the amplifier produce? The FLX1400.4 produces up to 350 watts RMS × 4 channels at 2 ohms and 14.4 volts. Does this system include a DSP amplifier? No. This package includes the standard FLX1400.4 power amplifier without built-in DSP. How many speakers are included? Four speakers are included: two CHX65.2 6.5-inch fairing speakers and two CHX69.2 6×9-inch saddlebag speakers. Does the system integrate with the factory A2B radio? Yes. It includes a NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are the Road Glide fairing grilles included? Yes. The system includes a pair of powder-coated steel 24CHDRGG Cicada-branded Road Glide fairing grilles. Does the system include rear-speaker wiring? Yes. The 24HDRO plug-and-play rear-output harness is included for routing amplifier output to the saddlebag speakers. Does the system include an amplifier rack? Yes. The package includes the 24HDAR-RG black-anodized aluminum Road Glide amplifier rack and mounting hardware. Do the factory saddlebag lids need to be cut? Yes. The included 24CHDLID is a cut-in 6×9-inch mounting system. Installation permanently modifies both factory saddlebag lids. Is this completely plug-and-play? The A2B interface, amplifier signal connections, rear-output harness and amplifier rack are vehicle-specific. The rear speaker installation still requires permanent cutting of the factory saddlebag lids. What fuse should be used with the amplifier? Cicada’s FLX1400.4 amplifier specifications list a recommended 120-amp fuse, while the included HDPG4K kit includes 60-, 80- and 100-amp fuses. Confirm the final fuse value with current Cicada Audio installation guidance before powering the system. Does the system require setup or tuning? Yes. Amplifier gains, high-pass filters and the external speaker crossovers must be configured correctly. Advanced equalization, time alignment and limiting require a separate compatible DSP. Need Help Confirming Your Road Glide System? Submit your Road Glide year, trim, factory audio package and current electrical setup so Garage Bagger Stereo can verify system fitment, installation requirements and the supporting components needed for your motorcycle. Request a Custom Audio Build View Installation Services -
Cicada Audio 24FLXCHX-4X4SG 1400W 4-Speaker Audio System for 2024+ Street Glide
Vendor:Cicada AudioCOMPLETE 2024+ STREET GLIDE AUDIO SYSTEM Cicada Audio 24FLXCHX-4X4SG 1400W 4-Speaker Audio System The Cicada Audio 24FLXCHX-4X4SG is a complete front-and-rear audio system for compatible 2024 and newer Harley-Davidson Street Glide motorcycles. It combines a high-output four-channel amplifier, four 2-ohm Pro Coaxial Horn speakers, factory A2B radio integration, Street Glide-specific mounting components and the wiring needed to connect the complete system. See Everything Included View Speaker Load Complete Front and Rear Upgrade Designed for compatible 2024+ Street Glide motorcycles FLX1400.4 four-channel Class-D amplifier 350 watts RMS × 4 channels at 2Ω and 14.4V Standard non-DSP amplifier configuration Four 2Ω Pro Coaxial Horn speakers Two 6.5-inch fairing speakers Two 6×9-inch saddlebag speakers NAV-TV ZEN-H A2B radio integration Street Glide amplifier rack and complete wiring 6×9 saddlebag lid cut-in mounting system 24FLXCHX-4X4SG Complete System Overview This manufacturer-matched Cicada Audio package combines the amplifier, speakers, factory-radio interface, wiring and vehicle-specific mounting components needed for a four-channel Street Glide audio upgrade. Two CHX65.2 6.5-inch Pro Coaxial Horn speakers replace the front fairing speakers. Two CHX69.2 6×9-inch Pro Coaxial Horn speakers install in the factory saddlebag lids using the included 24CHDLID cut-in system. All four speakers are 2-ohm models. Each speaker connects to an individual channel of the FLX1400.4 amplifier, creating a 2-ohm nominal load on each of the amplifier’s four channels. Non-DSP Amplifier Configuration FLX1400.4 Standard Amplifier This package includes the standard FLX1400.4 four-channel power amplifier. The amplifier does not contain the integrated digital signal processor found in the FLX1400.4PRO. ZEN-H A2B Integration The included NAV-TV ZEN-H package extracts the factory A2B audio signal and connects it to the Cicada amplifier through a direct-connect harness. No built-in DSP: This 24FLXCHX package should not be confused with the 24FLXPCHX system. The “P” version uses the FLX1400.4PRO amplifier with built-in DSP. This package uses the standard FLX1400.4 amplifier without built-in DSP. Speaker Impedance and Amplifier Channel Load Front Fairing: 2Ω The system includes one pair of CHX65.2 6.5-inch Pro Coaxial Horn speakers. Each front speaker has a nominal impedance of 2 ohms. Rear Saddlebags: 2Ω The system includes one pair of CHX69.2 6×9-inch Pro Coaxial Horn speakers. Each rear speaker has a nominal impedance of 2 ohms. Amplifier Load: 2Ω × 4 One speaker is connected to each amplifier channel, presenting a 2-ohm nominal load to all four channels. Front Left Channel One CHX65.2 speaker — 2Ω Front Right Channel One CHX65.2 speaker — 2Ω Rear Left Channel One CHX69.2 speaker — 2Ω Rear Right Channel One CHX69.2 speaker — 2Ω Final Intended Load 2Ω per amplifier channel Speaker impedance: This package does not include selectable 4-ohm speaker versions. The supplied front and rear speakers are all 2-ohm models matched to the FLX1400.4 amplifier’s published 2-ohm stereo output. Everything Included in the Complete System FLX1400.4 — 1400W Four-Channel Amplifier One compact Class-D four-channel amplifier producing up to 350 watts RMS × 4 at 2 ohms and 14.4 volts. This is the standard non-DSP FLX1400.4 model. CHX65.2 — 6.5" Pro Coaxial Horn Speakers One pair of 2-ohm CHX65.2 speakers for the Street Glide fairing. Each speaker is rated for 300 watts RMS and includes an external 12dB crossover with optional tweeter attenuation. CHX69.2 — 6×9" Pro Coaxial Horn Speakers One pair of 2-ohm CHX69.2 speakers for the rear saddlebag lids. Each speaker is rated for 400 watts RMS and includes an external 12dB crossover with optional tweeter attenuation. 24CHDSGG — Street Glide Fairing Grilles One pair of Cicada Audio branded aluminum fairing grilles designed specifically for compatible 2024 and newer Street Glide models. 24CHDLID — 6×9" Saddlebag Lid Cut-In Kit A complete left-and-right saddlebag lid mounting system with angled top-load baffles, protective steel grilles, waterproof gasketing and cutout templates. HDPG4K — 4-AWG Amplifier Installation Kit A motorcycle-specific 4-AWG power and ground kit with terminated battery connections, amplifier-side ferrules, remote trigger wire and waterproof fuse holder. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface Kit The non-DSP NAV-TV ZEN-H A2B integration package with a Cicada Audio direct-connect harness and correctly pinned Molex connectors for the FLX1400.4 amplifier. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, short extensions and long speaker-wire leads for routing amplifier output to the saddlebag speakers. 24HDAR-SG — Street Glide Amplifier Rack Black-anodized aluminum amplifier rack designed for compatible 2024 and newer Street Glide OEM amplifier mounting locations. Predrilled FLX mounting points and hardware are included. FLX1400.4 Amplifier Power 350W × 4 at 2Ω At 14.4 volts, the amplifier produces up to 350 watts RMS on each of its four channels into the included 2-ohm speakers. 225W × 4 at 4Ω The amplifier also supports four-channel 4-ohm operation, although this complete system includes 2-ohm speakers. 700W × 2 Bridged at 4Ω The FLX1400.4 can support bridged operation with compatible 4-ohm loads, but the included complete system uses four-channel stereo operation. Wide Input Range A 0.2V–12V input sensitivity range supports integration with compatible factory-radio interfaces and aftermarket signal sources. Built-In Crossovers Selectable high-pass, full-range and low-pass modes provide 30Hz–300Hz crossover adjustment with a 12dB-per-octave slope. Compact FLX Chassis The compact aluminum chassis is designed for space-limited motorcycle amplifier locations and installs on the included rack. FLX1400.4 Amplifier Specifications Amplifier Model FLX1400.4 Amplifier Type Four-channel Class-D power amplifier without built-in DSP Output at 2Ω / 14.4V 350W RMS × 4 channels Output at 2Ω / 12.5V 300W RMS × 4 channels Output at 4Ω / 14.4V 225W RMS × 4 channels Output at 4Ω / 12.5V 200W RMS × 4 channels Bridged Output at 4Ω / 14.4V 700W RMS × 2 channels Frequency Response 20Hz–20kHz ±3dB Operating Voltage 8V–16V Input Sensitivity 0.2V–12V Turn-On Modes Remote or DC offset Crossover Modes LPF / FULL / HPF Crossover Range 30Hz–300Hz Crossover Slope 12dB per octave Overall Dimensions 7.9 × 4.9 × 2.0 inches Built-In DSP No CHX65.2 Front Fairing Speakers Model CHX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch Pro Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 300W RMS / 600W maximum per speaker Mid-Bass Voice Coil 2 inches / 51mm Tweeter Voice Coil 1.4 inches / 35.56mm Cone Carbon Matrix Composite™ Tweeter Dome Aluminum Sensitivity 92dB Frequency Response 70Hz–20kHz ±4dB Mounting Depth 2.64 inches / 67mm External Crossover 12dB with optional -3dB / -6dB tweeter attenuation CHX69.2 Rear Saddlebag Speakers Model CHX69.2 Quantity Two speakers / one pair Speaker Type 6×9-inch Pro Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 400W RMS / 800W maximum per speaker Mid-Bass Voice Coil 2.5 inches / 64mm Tweeter Voice Coil 1.75 inches / 44mm Cone Carbon Matrix Composite™ Tweeter Dome Aluminum Sensitivity 92dB, 1W / 1M Frequency Response 46Hz–20kHz ±3dB Mounting Depth 3.75 inches / 96mm External Crossover 12dB with optional -3dB / -6dB tweeter attenuation 24CHDLID Saddlebag Lid System The included 24CHDLID is a complete cut-in system designed to turn compatible factory saddlebag lids into reinforced, rider-focused 6×9-inch speaker locations. Left and right angled top-load speaker baffles Heavy-duty powder-coated steel speaker grilles Waterproof gasketed clamping rings High-strength, UV-resistant molded components ABS saddlebag lid cutout templates Heavy-duty replacement lid gasket seals Rainproof lid covers Cicada lid tethers with crossover-storage pouches Die-cut speaker gasketing Permanent lid modification required: Both factory saddlebag lids must be cut using the templates supplied with the 24CHDLID mounting system. Plug-and-Play A2B Integration The included NAV-TV ZEN-H interface extracts the factory digital A2B audio signal. The Cicada direct-connect harness then routes that signal into the FLX1400.4 amplifier through correctly pinned locking connectors. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Direct connection to compatible Cicada Audio amplifiers OEM-grade positive-locking connectors Compact routing inside the Street Glide fairing Non-DSP amplifier integration configuration Plug-and-Play Versus Cut-In Installation Direct-Fit Components The A2B interface harness, amplifier input connections, rear-output harness and amplifier rack use vehicle-specific connections and mounting points to reduce custom wiring and fabrication. Cut-In Components The rear CHX69.2 speaker installation requires permanent cutting of the factory saddlebag lids using the templates and baffles supplied with the 24CHDLID system. Installation clarification: This is a complete, vehicle-specific integration system, but it is not a completely no-modification installation because the rear saddlebag lid speakers require permanent lid cutting. Complete System Specifications Complete System SKU 24FLXCHX-4X4SG Vehicle Application Compatible 2024 and newer Harley-Davidson Street Glide Amplifier FLX1400.4 four-channel amplifier without built-in DSP Amplifier Output 350W RMS × 4 at 2Ω and 14.4 volts Total Speaker Count Four Pro Coaxial Horn speakers Front Speakers Two CHX65.2 6.5-inch speakers Rear Speakers Two CHX69.2 6×9-inch speakers Speaker Impedance All four speakers are 2Ω Intended Channel Load 2Ω per amplifier channel Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada direct-connect harness Built-In DSP No Front Grilles 24CHDSGG Street Glide fairing grilles Rear Lid System 24CHDLID 6×9-inch cut-in mounting kit Power Wiring HDPG4K 4-AWG amplifier installation kit Rear Speaker Wiring 24HDRO plug-and-play rear-output harness Amplifier Rack 24HDAR-SG Street Glide amplifier mounting rack Shopify Variants None Electrical and Installation Requirements High-current audio system: The motorcycle battery, charging system, power wiring, main fuse and ground path must support the complete amplifier system. Follow the current Cicada installation documentation when selecting the final fuse value. Use the included HDPG4K 4-AWG power and ground installation kit. Install the correct main fuse near the battery connection. Use clean, secure and properly prepared power and ground connections. Confirm that the motorcycle battery is in good operating condition. Evaluate charging-system capacity before extended high-output use. Protect all wiring from heat, sharp edges and moving components. Secure the amplifier and wiring against motorcycle vibration. Set amplifier gains and crossovers for the included speakers. Professional installation and system setup are strongly recommended. Fitment and Ordering Notes Verify fitment: Confirm the exact Street Glide year, trim, factory radio, factory amplifier configuration, saddlebag style and electrical system before ordering. Designed for compatible 2024 and newer Street Glide motorcycles. The system includes four 2-ohm speakers. The system does not include selectable 4-ohm speaker variants. The amplifier uses one speaker on each of its four channels. The FLX1400.4 amplifier does not include built-in DSP. The A2B interface supports direct factory-radio signal integration. The rear-output harness routes amplifier output to the saddlebags. The factory saddlebag lids require permanent cutting. Amplifier gain and crossover setup are required. Professional installation is strongly recommended. Best For 2024+ Street Glide riders wanting a complete Cicada Audio system Four-speaker front-and-rear motorcycle audio upgrades Factory A2B radio systems requiring aftermarket integration High-output 2-ohm Pro Coaxial Horn speaker systems Riders adding 6×9-inch speakers to factory saddlebag lids Systems using a standard four-channel amplifier without built-in DSP Professional Street Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Systems Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Amplifiers and Integration Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCHX-4X4SG FAQ What ohm speakers come with this system? All four included speakers are 2-ohm models. The front pair is CHX65.2, and the rear saddlebag pair is CHX69.2. What load does the amplifier see? Each amplifier channel powers one 2-ohm speaker. The intended system configuration therefore presents a 2-ohm nominal load to each of the amplifier’s four channels. How much power does the amplifier produce? The FLX1400.4 produces up to 350 watts RMS × 4 channels at 2 ohms and 14.4 volts. Does this system include a DSP amplifier? No. This package includes the standard FLX1400.4 amplifier without built-in DSP. The 24FLXPCHX version uses the FLX1400.4PRO amplifier with integrated DSP. How many speakers are included? Four speakers are included: two CHX65.2 6.5-inch fairing speakers and two CHX69.2 6×9-inch saddlebag speakers. Does the system integrate with the factory A2B radio? Yes. It includes a NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are the Street Glide fairing grilles included? Yes. The system includes a pair of 24CHDSGG Cicada-branded Street Glide fairing grilles. Does the system include rear-speaker wiring? Yes. The 24HDRO plug-and-play rear-output harness is included for routing amplifier output to the saddlebag speakers. Does the system include an amplifier rack? Yes. The package includes the 24HDAR-SG black-anodized aluminum Street Glide amplifier rack and mounting hardware. Do the factory saddlebag lids need to be cut? Yes. The included 24CHDLID is a cut-in 6×9-inch mounting system. Installation permanently modifies both factory saddlebag lids. Is this completely plug-and-play? The A2B interface, amplifier signal connections, rear-output harness and amplifier rack are vehicle-specific. The rear speaker installation still requires permanent cutting of the factory saddlebag lids. Does the system require tuning? The amplifier gains, high-pass filters and external speaker crossovers must be configured correctly. Because this amplifier does not include DSP, advanced equalization and time alignment require a separate compatible processor. Need Help Confirming Your Street Glide System? Call Garage Bagger Stereo with your Street Glide year, trim, factory audio package and current electrical setup. We’ll help confirm fitment and make sure the complete Cicada system is installed, wired and configured correctly for your motorcycle. Call 864-334-6131 Ask GBS for Help -
Cicada Audio 24FLXCXX-4X2RG 500W 2-Speaker System for 2024+ Road Glide
Vendor:Cicada AudioCOMPLETE 2024+ ROAD GLIDE FRONT AUDIO SYSTEM Cicada Audio 24FLXCXX-4X2RG 500W 2-Speaker Audio System The Cicada Audio 24FLXCXX-4X2RG is a complete front-fairing audio package for compatible 2024 and newer Harley-Davidson Road Glide motorcycles. It combines a compact four-channel amplifier, two high-efficiency 2-ohm Pro Coaxial speakers, factory A2B radio integration and Road Glide-specific installation components. The supplied system uses two amplifier channels for the front speaker pair. Two additional channels and the included rear-output harness remain available for a properly matched future rear-speaker upgrade. See Everything Included View Speaker Load Front Audio with Rear Expansion Support Designed for compatible 2024+ Road Glide motorcycles FLX500.4 compact four-channel Class-D amplifier 125 watts RMS × 4 channels at 2Ω Two CXX65.2 6.5-inch Pro Coaxial speakers Both included speakers are 2Ω Road Glide fairing grilles included NAV-TV ZEN-H A2B factory-radio integration Road Glide amplifier rack included 8-AWG amplifier power kit included Rear-output harness included for future expansion 24FLXCXX-4X2RG Complete System Overview This Cicada Audio package upgrades the two factory Road Glide fairing speaker locations while installing the amplifier, power wiring, A2B interface and vehicle-specific mounting hardware needed for a complete front audio system. One pair of CXX65.2 6.5-inch Pro Coaxial speakers installs behind the included Cicada-branded Road Glide fairing grilles. Each speaker has a nominal impedance of 2 ohms and connects to its own amplifier channel. The FLX500.4 provides four amplified channels. The supplied system uses two channels for the front speakers, while the 24HDRO harness supports future expansion to compatible rear speakers. Standard Non-DSP System Configuration FLX500.4 Power Amplifier This package uses the standard FLX500.4 four-channel Class-D amplifier. It delivers compact, efficient power but does not contain an integrated digital signal processor. NAV-TV ZEN-H A2B Integration The included interface kit converts the compatible factory A2B audio signal and connects it to the Cicada amplifier through purpose-built locking harness connections. No built-in DSP: The FLX500.4 does not provide digital equalization, time alignment or DSP limiting. Those functions require a separately purchased compatible processor when the system design calls for advanced tuning. Speaker Impedance and Amplifier Channel Load Front Left: 2Ω One CXX65.2 speaker connects to the assigned left-front amplifier channel and presents a nominal 2-ohm load. Front Right: 2Ω The second CXX65.2 speaker connects to the assigned right-front amplifier channel and presents a nominal 2-ohm load. Rear Channels: Available No rear speakers are included. The remaining two amplifier channels can power a properly matched future rear-speaker system. Included Speaker Count Two speakers / one pair Included Speaker Model CXX65.2 Speaker Impedance 2Ω per speaker Supplied Configuration One 2Ω speaker on each of two amplifier channels Remaining Amplifier Channels Two channels available for compatible rear-speaker expansion Supplied system load: Only two amplifier channels are loaded by the included speakers. Each loaded channel operates at a nominal 2 ohms. Rear-speaker impedance must be matched correctly before connecting additional speakers. Everything Included in the Complete System FLX500.4 — Four-Channel Amplifier One compact Class-D amplifier rated for 125 watts RMS × 4 channels at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. CXX65.2 — 6.5" Pro Coaxial Speakers One pair of 2-ohm CXX65.2 speakers for the Road Glide fairing. Each speaker is rated for 100 watts RMS and uses a Kevlar cone, PEI dome tweeter and built-in 6dB crossover. 24CHDRGG — Road Glide Fairing Grilles One pair of Cicada Audio-branded powder-coated steel grilles designed for compatible 2024 and newer Harley-Davidson Road Glide fairings. 24HDAR-RG — Road Glide Amplifier Rack Black-anodized aluminum amplifier rack that uses compatible OEM mounting locations and includes predrilled FLX amplifier mounting points and installation hardware. HDPG8K — 8-AWG Amplifier Power Kit Includes six-foot power and ground cables, braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring and a waterproof Mini-ANL fuse holder. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect amplifier harness and correctly pinned locking Molex connections. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, short extensions and longer speaker-wire leads for future rear-speaker installation. Rear-speaker ready: The rear-output harness and two additional amplifier channels are included. Rear speakers, saddlebag speaker adapters, speaker lids and cut-in hardware are sold separately. FLX500.4 Amplifier Power 125W × 4 at 2Ω The amplifier produces up to 125 watts RMS on each of its four channels when operating at 2 ohms and 14.4 volts. 95W × 4 at 4Ω It also supports four-channel operation with compatible 4-ohm speakers when the system is designed around that channel load. 250W × 2 Bridged The published bridged configuration is 250 watts RMS × 2 into compatible 4-ohm loads. Wide Input Range The 0.2V–12V gain range supports compatible factory interfaces, aftermarket radios, processors and high-output preamplifiers. Flexible Crossovers Selectable LPF, FULL and HPF modes provide 20Hz–20kHz adjustment with selectable 6, 12, 24 or 48dB-per-octave slopes. Compact Motorcycle Chassis The compact aluminum chassis installs on the included Road Glide amplifier rack without consuming unnecessary fairing space. FLX500.4 Amplifier Specifications Amplifier Model FLX500.4 Amplifier Type Four-channel Class-D amplifier without built-in DSP Output at 4Ω 95W RMS × 4 channels at 14.4V Output at 2Ω 125W RMS × 4 channels at 14.4V Bridged Output at 4Ω 250W RMS × 2 channels at 14.4V Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Amplifier Fuse 50A according to current amplifier specifications Efficiency 80% Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 THD + Noise 0.1% at 2Ω per channel at 10% rated power Input Sensitivity 0.2V–12V Turn-On Modes REM / DC / VOX Crossover Modes LPF / FULL / HPF Crossover Range 20Hz–20,000Hz Crossover Slopes 6 / 12 / 24 / 48dB per octave Dimensions with Brackets 5.2 × 4.9 × 2.0 inches / 131 × 125 × 51mm Chassis Dimensions 4.0 × 4.9 × 2.0 inches / 104 × 125 × 51mm CXX65.2 Road Glide Fairing Speakers Speaker Model CXX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch high-performance Pro Coaxial speaker Nominal Impedance 2Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Mid-Bass Voice Coil 1.4 inches / 35mm Tweeter Voice Coil 1 inch / 25mm Cone Kevlar Tweeter Dome PEI Magnet N45H neodymium Built-In Crossover 6dB Sensitivity 93dB Frequency Response 55Hz–20kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Weather Protection Rain or Shine all-weather design with UV-protected surfaces Warranty Two-year manufacturer warranty Road Glide-Specific Hardware 24CHDRGG Fairing Grilles The included powder-coated steel grilles are shaped for compatible 2024 and newer Road Glide fairings and feature Cicada Audio-branded emblems. 24HDAR-RG Amplifier Rack The black-anodized aluminum rack uses compatible OEM amplifier mounting locations and includes predrilled holes for FLX-style amplifiers. Factory A2B Radio Integration The NAV-TV ZEN-H interface extracts the compatible factory digital A2B audio signal. The included Cicada harness routes that signal directly into the FLX500.4 through correctly pinned locking connections. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Positive-locking automotive-grade connections Direct integration with compatible Cicada Audio amplifiers Compact routing inside the Road Glide fairing Standard non-DSP system configuration Rear-Speaker-Ready System Design The FLX500.4 provides four amplifier channels, but the supplied package includes only two front fairing speakers. The included 24HDRO harness prepares the system for compatible rear speakers without replacing the original amplifier or rebuilding the factory-radio interface. Included for Expansion Two additional amplifier channels 24HDRO rear-output harness Factory-style harness connections Extended speaker-wire leads for rear routing Not Included Rear saddlebag speakers Saddlebag speaker adapters Cut-in speaker-lid hardware Rear speaker grilles or pods Expansion planning: Added rear speakers must be compatible with the FLX500.4 amplifier’s supported impedance, available output and crossover configuration. Power Wiring and Fuse Selection Included HDPG8K Power Kit The supplied kit includes six-foot 8-AWG power and ground cables, battery ring terminals, amplifier ferrules, remote trigger wiring and a waterproof Mini-ANL fuse holder. Amplifier Fuse Specification Cicada’s current FLX500.4 specification recommends a 50-amp fuse for the amplifier. Verify the fuse before installation: Cicada currently lists 60-, 80- and 100-amp fuses with the HDPG8K kit while the FLX500.4 page recommends 50 amps. Do not automatically install a larger supplied fuse. Confirm the correct fuse value and wire protection with current Cicada guidance. Complete System Specifications Complete System SKU 24FLXCXX-4X2RG Vehicle Application Compatible 2024 and newer Harley-Davidson Road Glide Amplifier FLX500.4 four-channel amplifier without built-in DSP Amplifier Output at 2Ω 125W RMS × 4 channels at 14.4V Included Speaker Count Two Pro Coaxial speakers Included Speakers Two CXX65.2 6.5-inch speakers Speaker Impedance 2Ω per included speaker Loaded Amplifier Channels Two channels at 2Ω each Rear Amplifier Channels Available for compatible future speakers Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada harness Built-In DSP No Front Grilles 24CHDRGG Road Glide fairing grilles Power Wiring HDPG8K 8-AWG power and ground installation kit Rear Output Wiring 24HDRO plug-and-play harness Amplifier Rack 24HDAR-RG Road Glide amplifier rack Rear Speakers Included No Saddlebag Mounting Kit Included No Shopify Variants None Fitment and Ordering Notes Verify fitment: Confirm the exact Road Glide year, trim, factory radio, factory amplifier configuration, fairing speaker locations and electrical system before ordering. Designed for compatible 2024 and newer Road Glide motorcycles. The package includes two 2-ohm front speakers. No selectable speaker-impedance variants are required. Two amplifier channels power the included front speaker pair. The remaining two channels are available for future expansion. The rear-output harness is included. Rear speakers and saddlebag mounting components are not included. No saddlebag cutting is required for the supplied front-only system. Future rear installation requirements depend on the selected mounting system. The amplifier does not include built-in DSP. Professional installation and system setup are recommended. Best For Compatible 2024+ Road Glide front-speaker upgrades Riders starting with a two-speaker amplified system Factory A2B radios requiring aftermarket amplifier integration Efficient 2-ohm Pro Coaxial motorcycle speakers Systems using a compact standard four-channel amplifier Riders planning to add compatible rear speakers later Professional Road Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCXX-4X2RG FAQ What impedance are the included speakers? Both included CXX65.2 speakers have a nominal impedance of 2 ohms. How many speakers are included? The system includes two 6.5-inch CXX65.2 Pro Coaxial speakers for the Road Glide fairing. What load does the amplifier see? Each included speaker connects to its own amplifier channel, so each loaded front channel operates at a nominal 2-ohm load. Are all four amplifier channels used? No. The supplied system uses two channels for the front speakers. The remaining two channels are available for a compatible rear-speaker upgrade. How much power does the amplifier produce? The FLX500.4 produces 125 watts RMS × 4 at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. How much power can the included speakers handle? Each CXX65.2 speaker is rated for 100 watts RMS and 200 watts maximum. Amplifier gain must be set correctly to protect the speakers. Does the amplifier include a DSP? No. The FLX500.4 is a standard four-channel amplifier without an integrated digital signal processor. Does the system integrate with the factory A2B radio? Yes. The package includes the NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are Road Glide fairing grilles included? Yes. The package includes the Cicada Audio 24CHDRGG powder-coated steel fairing grille pair. Is the amplifier rack included? Yes. The package includes the 24HDAR-RG Road Glide amplifier rack and its mounting hardware. Is rear-speaker wiring included? Yes. The 24HDRO rear-output harness is included for a future rear-speaker upgrade. Are rear speakers included? No. Rear speakers and their saddlebag mounting components must be purchased separately. Do the saddlebags need to be cut for this system? No saddlebag modification is required for the supplied front-only system. A future rear-speaker installation may require cutting or other modification depending on the selected mounting solution. What fuse should be used? Cicada’s current FLX500.4 specifications recommend a 50-amp fuse, but the included HDPG8K kit is listed with larger fuse values. Verify the correct final fuse with current Cicada guidance before installation. Need Help Planning Your Road Glide System? Garage Bagger Stereo can help verify Road Glide fitment, speaker impedance selection, amplifier matching, mounting clearance, power and speaker wiring, crossover setup and factory A2B signal integration before installation. Installation Services Request a Custom Build -
Cicada Audio 24FLXCXX-4X2SG 500W 2-Speaker System for 2024+ Street Glide
Vendor:Cicada AudioCOMPLETE 2024+ STREET GLIDE FRONT AUDIO SYSTEM Cicada Audio 24FLXCXX-4X2SG 500W 2-Speaker Audio System The Cicada Audio 24FLXCXX-4X2SG is a complete front-fairing audio package for compatible 2024 and newer Harley-Davidson Street Glide motorcycles. It combines a compact four-channel amplifier, two high-efficiency 2-ohm Pro Coaxial speakers, factory A2B radio integration, Street Glide-specific mounting hardware and a rear-output harness for future system expansion. See Everything Included View Speaker Load Front Audio with Rear Expansion Support Designed for compatible 2024+ Street Glide motorcycles FLX500.4 compact four-channel Class-D amplifier 125 watts RMS × 4 channels at 2Ω Two CXX65.2 6.5-inch Pro Coaxial speakers Both included speakers are 2Ω Street Glide fairing grilles included NAV-TV ZEN-H A2B factory-radio integration Street Glide amplifier rack included 8-AWG amplifier power kit included Rear-output harness included for future expansion 24FLXCXX-4X2SG Complete System Overview This Cicada Audio package upgrades the two factory Street Glide fairing speaker locations while installing the four-channel amplifier, power wiring, A2B interface and output wiring needed for a larger system. One pair of CXX65.2 6.5-inch Pro Coaxial speakers installs behind the included Cicada-branded Street Glide fairing grilles. Each speaker has a nominal impedance of 2 ohms and connects to its own amplifier channel. The FLX500.4 provides four amplified channels. The supplied configuration uses two channels for the front speaker pair, while the included 24HDRO harness prepares the other two channels for a separately purchased rear-speaker upgrade. Standard Non-DSP System Configuration FLX500.4 Power Amplifier This package uses the standard FLX500.4 four-channel amplifier. It delivers compact Class-D power but does not include an integrated digital signal processor. NAV-TV ZEN-H A2B Integration The included ZEN-H interface extracts the factory digital A2B audio signal and connects it directly to the Cicada amplifier through the included vehicle-specific harness. No built-in DSP: This package does not provide DSP equalization, time alignment or digital output limiting. Those functions require a separately purchased compatible digital signal processor. Speaker Impedance and Amplifier Channel Load Front Left: 2Ω One CXX65.2 speaker connects to the assigned left-front amplifier channel and presents a nominal 2-ohm load. Front Right: 2Ω The second CXX65.2 speaker connects to the assigned right-front amplifier channel and presents a nominal 2-ohm load. Rear Channels: Available No rear speakers are included. The remaining two amplifier channels can power a properly matched future rear-speaker system. Included Speaker Count Two speakers / one pair Included Speaker Model CXX65.2 Speaker Impedance 2Ω per speaker Supplied Configuration One 2Ω speaker on each of two amplifier channels Remaining Amplifier Channels Two channels available for compatible rear-speaker expansion Supplied system load: Only two amplifier channels are loaded by the included speakers. Each loaded channel operates at a nominal 2 ohms. Rear-speaker impedance must be matched correctly before connecting additional speakers. Everything Included in the Complete System FLX500.4 — Four-Channel Amplifier One compact Class-D amplifier rated for 125 watts RMS × 4 channels at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. CXX65.2 — 6.5" Pro Coaxial Speakers One pair of 2-ohm CXX65.2 speakers for the Street Glide fairing. Each speaker is rated for 100 watts RMS and uses a Kevlar cone, integrated PEI tweeter and built-in 6dB crossover. 24CHDSGG — Street Glide Fairing Grilles One pair of Cicada Audio-branded aluminum fairing grilles designed specifically for compatible 2024 and newer Street Glide motorcycles. 24HDAR-SG — Street Glide Amplifier Rack Black-anodized aluminum amplifier rack that uses compatible factory amplifier mounting locations and includes predrilled FLX mounting points and installation hardware. HDPG8K — 8-AWG Amplifier Power Kit Includes six-foot power and ground cables with black braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring, a waterproof Mini-ANL fuse holder and 60-, 80- and 100-amp fuses. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect amplifier harness and correctly pinned, positive-locking Molex connections. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, two short extensions and two longer speaker-wire leads for future rear-speaker installation. Rear-speaker ready: The rear-output harness and two additional amplifier channels are included. Rear speakers, speaker lids, saddlebag adapters and rear mounting hardware are sold separately. FLX500.4 Amplifier Power 125W × 4 at 2Ω The amplifier produces up to 125 watts RMS on each of its four channels when operating at 2 ohms and 14.4 volts. 95W × 4 at 4Ω The amplifier also supports four-channel operation with compatible 4-ohm speakers. 250W × 2 Bridged The published bridged configuration is 250 watts RMS × 2 into compatible 4-ohm loads. Wide Input Range The 0.2V–12V gain range supports compatible factory-radio interfaces, aftermarket radios and external signal processors. Flexible Crossovers Selectable LPF, FULL and HPF modes provide 20Hz–20kHz adjustment with selectable 6, 12, 24 or 48dB-per-octave slopes. Compact Motorcycle Chassis The small aluminum chassis installs on the included Street Glide amplifier rack without consuming unnecessary fairing space. FLX500.4 Amplifier Specifications Amplifier Model FLX500.4 Amplifier Type Four-channel Class-D amplifier without built-in DSP Output at 4Ω 95W RMS × 4 channels at 14.4V Output at 2Ω 125W RMS × 4 channels at 14.4V Bridged Output at 4Ω 250W RMS × 2 channels at 14.4V Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Fuse 50A Efficiency 80% Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Input Sensitivity 0.2V–12V Turn-On Modes REM / DC / VOX Crossover Modes LPF / FULL / HPF Crossover Range 20Hz–20,000Hz Crossover Slopes 6 / 12 / 24 / 48dB per octave Dimensions with Brackets 5.2 × 4.9 × 2.0 inches / 131 × 125 × 51mm Chassis Dimensions 4.0 × 4.9 × 2.0 inches / 104 × 125 × 51mm CXX65.2 Street Glide Fairing Speakers Speaker Model CXX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch high-performance Pro Coaxial speaker Nominal Impedance 2Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Mid-Bass Voice Coil 1.4 inches / 35mm Tweeter Voice Coil 1 inch / 25mm Cone Kevlar Tweeter Dome PEI Magnet Neodymium Built-In Crossover 6dB Sensitivity 93dB Frequency Response 55Hz–20kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Warranty Two-year manufacturer warranty Rear-Speaker-Ready System Design The FLX500.4 provides four amplifier channels, but the supplied system includes only the two front fairing speakers. Cicada includes the 24HDRO harness so a compatible rear-speaker pair can be added without replacing the amplifier or rebuilding the factory-radio interface. Included for Expansion Two additional amplifier channels 24HDRO rear-output harness Factory-style harness connections Long speaker-wire leads for saddlebag routing Not Included Rear saddlebag speakers Saddlebag speaker adapters Cut-in speaker-lid hardware Rear speaker grilles or pods Expansion planning: Added rear speakers must be compatible with the FLX500.4 amplifier’s supported impedance, available output and crossover configuration. Factory A2B Radio Integration The NAV-TV ZEN-H interface extracts the factory digital A2B audio signal. The included Cicada harness routes that signal directly into the FLX500.4 through correctly pinned Molex connections. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Positive-locking automotive-grade connections Direct integration with compatible Cicada Audio amplifiers Compact routing inside the Street Glide fairing Standard non-DSP system configuration Installation and System Setup Mount the amplifier securely on the included 24HDAR-SG rack. Use the included HDPG8K power and ground wiring kit. Use a correctly rated fuse installed near the battery connection. Use the included A2B interface and Cicada amplifier harness. Confirm speaker mounting depth and grille clearance before assembly. Set the amplifier high-pass filters for the CXX65.2 speakers. Set amplifier gain using clean measured output. Do not exceed the 100-watt RMS rating of the front speakers. Secure all wiring against vibration, heat and sharp edges. Professional installation and system setup are recommended. Complete System Specifications Complete System SKU 24FLXCXX-4X2SG Vehicle Application Compatible 2024 and newer Harley-Davidson Street Glide Amplifier FLX500.4 four-channel amplifier without built-in DSP Amplifier Output at 2Ω 125W RMS × 4 channels at 14.4V Included Speaker Count Two Pro Coaxial speakers Included Speakers Two CXX65.2 6.5-inch speakers Speaker Impedance 2Ω per included speaker Loaded Amplifier Channels Two channels at 2Ω each Rear Amplifier Channels Available for compatible future speakers Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada harness Built-In DSP No Front Grilles 24CHDSGG Street Glide fairing grilles Power Wiring HDPG8K 8-AWG power and ground installation kit Rear Output Wiring 24HDRO plug-and-play harness Amplifier Rack 24HDAR-SG Street Glide amplifier rack Rear Speakers Included No Saddlebag Mounting Kit Included No Shopify Variants None Fitment and Ordering Notes Verify fitment: Confirm the exact Street Glide year, trim, factory radio, factory amplifier configuration, fairing speaker locations and electrical system before ordering. Designed for compatible 2024 and newer Street Glide motorcycles. The package includes two 2-ohm front speakers. The package does not include selectable speaker impedance options. Two amplifier channels power the included front speaker pair. The remaining two channels are available for future expansion. The rear-output harness is included. Rear speakers and saddlebag mounting components are not included. No saddlebag cutting is required for the supplied front-only system. Future rear installation requirements depend on the selected mounting system. The amplifier does not include built-in DSP. Professional installation and system setup are recommended. Best For Compatible 2024+ Street Glide front-speaker upgrades Riders starting with a two-speaker amplified system Factory A2B radios requiring aftermarket amplifier integration Efficient 2-ohm Pro Coaxial motorcycle speakers Systems using a compact standard four-channel amplifier Riders planning to add compatible rear speakers later Professional Street Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCXX-4X2SG FAQ What impedance are the included speakers? Both included CXX65.2 speakers have a nominal impedance of 2 ohms. How many speakers are included? The system includes two 6.5-inch CXX65.2 Pro Coaxial speakers for the Street Glide fairing. What load does the amplifier see? Each included speaker connects to its own amplifier channel, so each loaded front channel operates at a nominal 2-ohm load. Are all four amplifier channels used? No. The supplied system uses two channels for the front speakers. The remaining two channels are available for a compatible rear-speaker upgrade. How much power does the amplifier produce? The FLX500.4 produces 125 watts RMS × 4 at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. How much power can the speakers handle? Each CXX65.2 speaker is rated for 100 watts RMS and 200 watts maximum. Amplifier gain must be set correctly to protect the speakers. Does the amplifier include a DSP? No. The FLX500.4 is a standard four-channel amplifier without an integrated digital signal processor. Does the system integrate with the factory A2B radio? Yes. The package includes a NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are Street Glide fairing grilles included? Yes. The package includes the Cicada Audio 24CHDSGG aluminum fairing grille pair. Is the amplifier rack included? Yes. The package includes the 24HDAR-SG Street Glide amplifier rack and its mounting hardware. Is rear-speaker wiring included? Yes. The 24HDRO rear-output harness is included for a future rear-speaker upgrade. Are rear speakers included? No. Rear speakers and the required saddlebag mounting components must be purchased separately. Do the saddlebags need to be cut for this system? No saddlebag modification is required for the supplied front-only system. A future rear-speaker installation may require cutting or other modification depending on the selected mounting solution. Need Help Planning Your Street Glide System? Submit your Street Glide year, trim, factory audio package and future rear-speaker plans so Garage Bagger Stereo can verify fitment, electrical requirements and the correct expansion components for your motorcycle. Installation Services Request a Custom Build -
Cicada Audio 24FLXPCH-4X2RG 700W DSP 2-Speaker System for 2024+ Road Glide
Vendor:Cicada AudioCOMPLETE 2024+ ROAD GLIDE FRONT AUDIO SYSTEM Cicada Audio 24FLXPCH-4X2RG 700W DSP 2-Speaker System The Cicada Audio 24FLXPCH-4X2RG is a complete front-fairing audio package for compatible 2024 and newer Harley-Davidson Road Glide motorcycles. It combines a four-channel amplifier with built-in DSP, two high-efficiency 2-ohm Coaxial Horn speakers, factory A2B radio integration, Road Glide-specific mounting components and a rear-output harness for future system expansion. See Everything Included View Speaker Load Front Audio with Rear Expansion Support Designed for compatible 2024+ Road Glide motorcycles FLX700.4PRO amplifier with built-in six-channel DSP 175 watts RMS × 4 channels at 2Ω Two CH65.2C 6.5-inch Coaxial Horn speakers Both included speakers are 2Ω Road Glide fairing grilles included NAV-TV ZEN-H A2B factory-radio integration Road Glide amplifier rack included 6-AWG amplifier power kit included Rear-output harness included for future expansion 24FLXPCH-4X2RG Complete System Overview This Cicada Audio package upgrades the two factory Road Glide fairing speaker locations while establishing the amplifier, DSP, power wiring and A2B signal-integration foundation needed for a future four-channel audio system. One pair of CH65.2C 6.5-inch Coaxial Horn speakers installs behind the included Cicada-branded Road Glide fairing grilles. Each speaker has a nominal impedance of 2 ohms and connects to its own amplifier channel. The included FLX700.4PRO provides four amplified DSP channels. The supplied package uses two channels for the front speakers, while the included 24HDRO harness prepares the system for a separately purchased rear-speaker upgrade. Speaker Impedance and Amplifier Channel Load Front Left: 2Ω One CH65.2C speaker connects to the assigned left-front amplifier channel and presents a nominal 2-ohm load. Front Right: 2Ω The second CH65.2C speaker connects to the assigned right-front amplifier channel and presents a nominal 2-ohm load. Rear Channels: Available No rear speakers are supplied. The remaining two amplified channels can support a properly matched future rear-speaker system. Included Speaker Count Two speakers / one pair Included Speaker Model CH65.2C Speaker Impedance 2Ω per speaker Supplied Configuration One 2Ω speaker on each of two amplifier channels Remaining Amplified Channels Two channels available for compatible rear-speaker expansion Supplied system load: Only two amplifier channels are loaded by the included speakers. Each loaded channel operates at a nominal 2 ohms. Any future rear speakers must be matched to the amplifier’s supported impedance and available output. Everything Included in the Complete System FLX700.4PRO — Four-Channel DSP Amplifier One compact Class-D amplifier producing up to 175 watts RMS × 4 channels at 2 ohms. It includes a six-channel DSP with four internally amplified channels and two processed pass-through outputs. CH65.2C — 6.5" Coaxial Horn Speakers One pair of 2-ohm Larry Frederick Classic Coaxial Horn speakers for the Road Glide fairing. Each speaker is rated for 250 watts RMS and includes an external 12dB crossover. 24CHDRGG — Road Glide Fairing Grilles One pair of Cicada Audio-branded, powder-coated steel fairing grilles engineered for compatible 2024 and newer Road Glide motorcycles. 24HDAR-RG — Road Glide Amplifier Rack Black-anodized aluminum amplifier mounting rack that uses compatible OEM amplifier mounting locations and includes predrilled FLX mounting points and installation hardware. HDPG6K — 6-AWG Amplifier Power Kit Includes six-foot power and ground cables with braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring, a waterproof Mini-ANL fuse holder and multiple fuse values. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect amplifier harness and correctly pinned locking Molex connections. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, two short extensions and two longer speaker-wire leads for future rear-speaker installation. Rear-speaker ready: The rear-output harness is included, but rear speakers, saddlebag speaker adapters, speaker lids and cut-in mounting components are not included with 24FLXPCH-4X2RG. FLX700.4PRO Amplifier and DSP 175W × 4 at 2Ω The amplifier produces up to 175 watts RMS on each of four channels when operating at 2 ohms and 14.4 volts. 120W × 4 at 4Ω It also supports four-channel operation with compatible 4-ohm speakers for systems designed around that channel load. 350W × 2 Bridged The published bridged configuration is 350 watts RMS × 2 into compatible 4-ohm loads. Six-Channel DSP Four DSP channels feed the internal amplifier, while two additional processed channels provide pass-through outputs for expansion. Bluetooth and USB-C Bluetooth audio streaming and USB-C computer connectivity support compatible playback and PC-based DSP configuration. Compact Motorcycle Chassis The micro-sized aluminum chassis is designed for limited fairing space and uses conformal-coated circuitry for added protection against moisture and vibration. FLX700.4PRO Amplifier Specifications Amplifier Model FLX700.4PRO Amplifier Type Four-channel Class-D amplifier with built-in DSP Output at 4Ω 120W RMS × 4 channels at 14.4V Output at 2Ω 175W RMS × 4 channels at 14.4V Bridged Output at 4Ω 350W RMS × 2 channels at 14.4V DSP Channels Six total: four amplified and two pass-through Bluetooth Audio Included PC DSP Connection USB-C Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Fuse 50A Efficiency 80% Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Input Sensitivity 0.2V–12V Turn-On Modes REM / DC / VOX Dimensions with Brackets 5.3 × 4.9 × 2.0 inches / 134 × 125 × 51mm Chassis Dimensions 4.1 × 4.9 × 2.0 inches / 104 × 125 × 51mm CH65.2C Road Glide Fairing Speakers Speaker Model CH65.2C Quantity Two speakers / one pair Speaker Type 6.5-inch Larry Frederick Classic Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 250W RMS / 500W maximum per speaker Mid-Bass Voice Coil 2 inches / 51mm Tweeter Voice Coil 1.4 inches / 36mm Tweeter Dome Aluminum Cone Water-resistant treated paper Magnet N35SH neodymium External Crossover 12dB at 4kHz Sensitivity 96.4dB, 1W / 1M Frequency Response 75Hz–20kHz ±5dB Mounting Depth 3.0 inches / 76.2mm Mounting Diameter 5.7 inches / 145.5mm Warranty Two-year manufacturer warranty Road Glide-Specific Hardware 24CHDRGG Fairing Grilles The included powder-coated steel grilles are shaped for compatible 2024 and newer Road Glide fairings and feature Cicada Audio-branded emblems. 24HDAR-RG Amplifier Rack The black-anodized aluminum rack mounts at compatible factory amplifier locations and includes predrilled holes for Cicada FLX-style amplifiers. Rear-Speaker-Ready System Design The FLX700.4PRO is a four-channel amplifier, but this package includes only the two front fairing speakers. Cicada includes the 24HDRO harness so compatible rear speakers can be added later without replacing the original amplifier or rebuilding the complete signal path. Included for Expansion Two additional amplified channels 24HDRO rear-output harness Factory-style harness connections Long speaker-wire leads for rear routing Not Included Rear saddlebag speakers Saddlebag speaker adapters Cut-in speaker-lid hardware Rear speaker grilles or pods Expansion planning: Added rear speakers must be compatible with the amplifier’s supported impedance, available power, DSP channel configuration and overall motorcycle electrical system. Factory A2B Radio Integration The NAV-TV ZEN-H interface extracts the factory digital A2B audio signal. The included Cicada harness then routes that signal directly into the FLX700.4PRO through correctly pinned Molex connections. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Positive-locking automotive-grade connectors Direct connection to compatible Cicada Audio amplifiers Compact routing inside the Road Glide fairing DSP processing handled by the FLX700.4PRO amplifier System distinction: The included ZEN-H is the non-DSP interface configuration. Digital signal processing, equalization, crossovers and channel control are performed inside the FLX700.4PRO. Installation and System Setup Mount the amplifier securely on the included 24HDAR-RG rack. Use the included HDPG6K power and ground wiring kit. Install the correctly rated fuse near the battery connection. Use the included A2B interface and Cicada amplifier harness. Install the CH65.2C crossovers according to the system layout. Confirm the required speaker depth before final fairing assembly. Configure DSP crossovers and output levels for the CH65.2C speakers. Set amplifier gain and limiters using clean measured output. Secure all wiring against vibration, heat and sharp edges. Professional installation and DSP tuning are strongly recommended. Complete System Specifications Complete System SKU 24FLXPCH-4X2RG Vehicle Application Compatible 2024 and newer Harley-Davidson Road Glide Amplifier FLX700.4PRO four-channel amplifier with built-in DSP Amplifier Output at 2Ω 175W RMS × 4 channels at 14.4V Included Speaker Count Two Coaxial Horn speakers Included Speakers Two CH65.2C 6.5-inch speakers Speaker Impedance 2Ω per included speaker Loaded Amplifier Channels Two channels at 2Ω each Rear Amplified Channels Available for compatible future speakers Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada harness Front Grilles 24CHDRGG Road Glide fairing grilles Power Wiring HDPG6K 6-AWG power and ground kit Rear Output Wiring 24HDRO plug-and-play harness Amplifier Rack 24HDAR-RG Road Glide amplifier rack Rear Speakers Included No Saddlebag Mounting Kit Included No Shopify Variants None Fitment and Ordering Notes Verify fitment: Confirm the exact Road Glide year, trim, factory radio, factory amplifier configuration, fairing speaker location and electrical system before ordering. Designed for compatible 2024 and newer Road Glide motorcycles. The package includes two 2-ohm front speakers. The package does not include selectable speaker impedance options. Two amplifier channels power the included front speaker pair. The remaining amplified channels are available for future expansion. The rear-output harness is included. Rear speakers and saddlebag mounting components are not included. No saddlebag cutting is required for the supplied front-only system. Future rear installation requirements depend on the selected mounting system. DSP configuration, crossover setup and output limiting are required. Professional installation and tuning are strongly recommended. Best For Compatible 2024+ Road Glide front-speaker upgrades Riders starting with a two-speaker amplified system Factory A2B radios requiring aftermarket amplifier integration High-efficiency 2-ohm Coaxial Horn speakers Systems requiring built-in DSP tuning and crossover control Riders planning to add rear speakers later Professional Road Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXPCH-4X2RG FAQ What impedance are the included speakers? Both included CH65.2C speakers have a nominal impedance of 2 ohms. How many speakers are included? The system includes two 6.5-inch CH65.2C Coaxial Horn speakers for the Road Glide fairing. What load does the amplifier see? Each included speaker is connected to its own amplifier channel, so each loaded front channel operates at a nominal 2-ohm load. Are all four amplifier channels used? No. The supplied package uses two amplified channels for the front speakers. The other two channels remain available for a compatible rear-speaker upgrade. How much power does the amplifier produce? The FLX700.4PRO produces up to 175 watts RMS × 4 at 2 ohms, 120 watts RMS × 4 at 4 ohms or 350 watts RMS × 2 bridged at 4 ohms. Does the amplifier include a DSP? Yes. The FLX700.4PRO includes a six-channel DSP with four amplified channels and two processed pass-through channels. Why does the package use a non-DSP ZEN-H interface? The ZEN-H interface extracts the factory A2B signal. DSP processing is then performed inside the FLX700.4PRO amplifier. Are Road Glide fairing grilles included? Yes. The package includes the Cicada Audio 24CHDRGG powder-coated steel fairing grille pair. Is the amplifier rack included? Yes. The package includes the 24HDAR-RG Road Glide amplifier rack and mounting hardware. Is rear-speaker wiring included? Yes. The 24HDRO rear-output harness is included for future rear-speaker expansion. Are rear speakers included? No. The system is rear-speaker ready, but rear speakers and their saddlebag mounting components must be purchased separately. Do the saddlebags need to be cut for this two-speaker kit? No saddlebag modification is required for the supplied front-only system. A future rear-speaker upgrade may require cutting or other modification depending on the selected mounting solution. Does the system require tuning? Yes. The amplifier DSP, crossover frequencies, equalization, limiters and gain structure must be configured for the included speakers and any future rear-speaker expansion. Need Help Planning Your Road Glide System? Submit your Road Glide year, trim, factory audio package and future rear-speaker plans so Garage Bagger Stereo can verify fitment, electrical requirements and the correct expansion components for your motorcycle. Installation Services Request a Custom Build -
Cicada Audio 24FLXPCH-4X2SG 700W DSP 2-Speaker System for 2024+ Street Glide
Vendor:Cicada AudioCOMPLETE 2024+ STREET GLIDE FRONT AUDIO SYSTEM Cicada Audio 24FLXPCH-4X2SG 700W DSP 2-Speaker System The Cicada Audio 24FLXPCH-4X2SG is a complete front-fairing audio package for compatible 2024 and newer Harley-Davidson Street Glide motorcycles. It combines a four-channel amplifier with built-in DSP, two high-efficiency 2-ohm Coaxial Horn speakers, factory A2B radio integration, Street Glide-specific mounting components and a rear-output harness for future system expansion. See Everything Included View Speaker Load Front System with Rear Expansion Support Designed for compatible 2024+ Street Glide motorcycles FLX700.4PRO amplifier with built-in six-channel DSP 175 watts RMS × 4 channels at 2Ω Two CH65.2C 6.5-inch Coaxial Horn speakers Both included speakers are 2Ω Street Glide fairing grilles included NAV-TV ZEN-H A2B factory-radio integration Street Glide amplifier rack included 6-AWG amplifier power kit included Rear-output harness included for future expansion 24FLXPCH-4X2SG Complete System Overview This Cicada Audio package upgrades the two factory Street Glide fairing speaker locations while establishing the amplifier, DSP, power wiring and signal-integration foundation needed for a larger four-channel system. One pair of CH65.2C 6.5-inch Coaxial Horn speakers installs behind the included Cicada-branded Street Glide fairing grilles. Each speaker has a nominal impedance of 2 ohms and connects to its own amplifier channel. The included FLX700.4PRO provides four amplified DSP channels. The base package uses two channels for the front speakers, while the included 24HDRO harness prepares the system for a separately purchased rear-speaker upgrade. Speaker Impedance and Amplifier Channel Load Front Left: 2Ω One CH65.2C speaker connects to the assigned left-front amplifier channel and presents a nominal 2-ohm load. Front Right: 2Ω The second CH65.2C speaker connects to the assigned right-front amplifier channel and presents a nominal 2-ohm load. Rear Channels: Available No rear speakers are included. The other two amplified channels can support a properly matched future rear-speaker system. Included Speaker Count Two speakers / one pair Included Speaker Model CH65.2C Speaker Impedance 2Ω per speaker Base Configuration One 2Ω speaker on each of two amplifier channels Unused Amplified Channels Two channels available for compatible rear-speaker expansion Base-system load: Only two amplifier channels are loaded by the included system. Each loaded channel operates at a nominal 2 ohms. Rear-speaker impedance must be matched correctly before using the other two channels. Everything Included in the Complete System FLX700.4PRO — Four-Channel DSP Amplifier One compact Class-D amplifier producing up to 175 watts RMS × 4 channels at 2 ohms. It includes a six-channel DSP with four internally amplified channels and two processed pass-through outputs. CH65.2C — 6.5" Coaxial Horn Speakers One pair of 2-ohm Larry Frederick Classic Coaxial Horn speakers for the Street Glide fairing. Each speaker is rated for 250 watts RMS and includes an external 12dB crossover. 24CHDSGG — Street Glide Fairing Grilles One pair of Cicada Audio-branded, powder-coated steel fairing grilles designed for compatible 2024 and newer Street Glide motorcycles. 24HDAR-SG — Street Glide Amplifier Rack Black-anodized aluminum amplifier mounting rack that uses compatible OEM amplifier locations and includes predrilled FLX mounting points and installation hardware. HDPG6K — 6-AWG Amplifier Power Kit Includes six-foot power and ground cables with braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring, a waterproof Mini-ANL fuse holder and multiple fuse values. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect amplifier harness and correctly pinned locking Molex connections. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, two short extensions and two longer speaker-wire leads for future rear-speaker installation. Rear-speaker ready: The rear-output harness is included, but rear speakers, saddlebag speaker mounting parts and a saddlebag lid cut-in kit are not included with 24FLXPCH-4X2SG. FLX700.4PRO Amplifier and DSP 175W × 4 at 2Ω The amplifier produces up to 175 watts RMS on each of four channels when operating at 2 ohms and 14.4 volts. 120W × 4 at 4Ω It also supports four-channel operation with compatible 4-ohm speakers for systems designed around that channel load. 350W × 2 Bridged The published bridged configuration is 350 watts RMS × 2 into compatible 4-ohm loads. Six-Channel DSP Four DSP channels feed the internal amplifier, while two additional processed channels provide pass-through outputs for expansion. Bluetooth and USB-C Bluetooth audio streaming and USB-C computer connectivity support audio playback and compatible PC-based DSP configuration. Compact Motorcycle Chassis The micro-sized aluminum chassis is designed for limited fairing and rack space while using conformal-coated circuitry for protection. FLX700.4PRO Amplifier Specifications Amplifier Model FLX700.4PRO Amplifier Type Four-channel Class-D amplifier with built-in DSP Output at 4Ω 120W RMS × 4 channels at 14.4V Output at 2Ω 175W RMS × 4 channels at 14.4V Bridged Output at 4Ω 350W RMS × 2 channels at 14.4V DSP Channels Six total: four amplified and two pass-through Bluetooth Audio Included PC DSP Connection USB-C Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Fuse 50A Efficiency 80% Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Input Sensitivity 0.2V–12V Turn-On Modes REM / DC / VOX Dimensions with Brackets 5.3 × 4.9 × 2.0 inches / 134 × 125 × 51mm Chassis Dimensions 4.1 × 4.9 × 2.0 inches / 104 × 125 × 51mm CH65.2C Front Fairing Speakers Speaker Model CH65.2C Quantity Two speakers / one pair Speaker Type 6.5-inch Larry Frederick Classic Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 250W RMS / 500W maximum per speaker Mid-Bass Voice Coil 2 inches / 51mm Tweeter Voice Coil 1.4 inches / 36mm Tweeter Dome Aluminum Cone Water-resistant treated paper Magnet N35SH neodymium External Crossover 12dB at 4kHz Sensitivity 96.4dB, 1W / 1M Frequency Response 75Hz–20kHz ±5dB Mounting Depth 3.0 inches / 76.2mm Mounting Diameter 5.7 inches / 145.5mm Warranty Two-year manufacturer warranty Rear-Speaker-Ready System Design The FLX700.4PRO is a four-channel amplifier, but the base package includes only the two front fairing speakers. Cicada includes the 24HDRO harness so compatible rear speakers can be added later without replacing the original amplifier or rebuilding the complete signal path. Included for Expansion Two additional amplified channels 24HDRO rear-output harness Factory-style harness connections Long speaker-wire leads for saddlebag routing Not Included Rear saddlebag speakers Saddlebag lid speaker adapters Cut-in speaker-lid hardware Rear speaker grilles or pods Expansion planning: Any added rear speakers must be compatible with the amplifier’s supported impedance, available power, crossover configuration and overall electrical system. Factory A2B Radio Integration The NAV-TV ZEN-H interface extracts the factory digital A2B audio signal. The included Cicada harness then routes that signal directly into the FLX700.4PRO through correctly pinned Molex connections. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Positive-locking automotive-grade connectors Direct connection to compatible Cicada Audio amplifiers Compact routing inside the Street Glide fairing DSP processing handled by the FLX700.4PRO amplifier System distinction: The included ZEN-H is the non-DSP interface configuration. The digital signal processing, tuning, crossovers and channel control are provided by the FLX700.4PRO. Installation and System Setup Mount the amplifier securely on the included 24HDAR-SG rack. Use the included HDPG6K power and ground wiring kit. Install the correctly rated fuse near the battery connection. Use the included A2B interface and Cicada amplifier harness. Install the CH65.2C crossovers according to the system layout. Confirm 3.0 inches of speaker mounting depth before final assembly. Configure DSP crossovers and output levels for the CH65.2C speakers. Set amplifier gain and limiters using clean measured output. Secure all wiring against vibration, heat and sharp edges. Professional installation and DSP tuning are strongly recommended. Complete System Specifications Complete System SKU 24FLXPCH-4X2SG Vehicle Application Compatible 2024 and newer Harley-Davidson Street Glide Amplifier FLX700.4PRO four-channel amplifier with built-in DSP Amplifier Output at 2Ω 175W RMS × 4 channels at 14.4V Included Speaker Count Two Coaxial Horn speakers Included Speakers Two CH65.2C 6.5-inch speakers Speaker Impedance 2Ω per included speaker Base Loaded Channels Two amplifier channels at 2Ω each Rear Amplified Channels Available for compatible future speakers Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada harness Front Grilles 24CHDSGG Street Glide fairing grilles Power Wiring HDPG6K 6-AWG power and ground kit Rear Output Wiring 24HDRO plug-and-play harness Amplifier Rack 24HDAR-SG Street Glide amplifier rack Rear Speakers Included No Saddlebag Lid Kit Included No Shopify Variants None Fitment and Ordering Notes Verify fitment: Confirm the exact Street Glide year, trim, factory radio, factory amplifier configuration, fairing speaker location and electrical system before ordering. Designed for compatible 2024 and newer Street Glide motorcycles. The package includes two 2-ohm front speakers. The package does not include selectable speaker impedance options. Two amplifier channels power the included front speaker pair. The remaining amplified channels are available for future expansion. The rear-output harness is included. Rear speakers and saddlebag mounting components are not included. DSP configuration, crossover setup and output limiting are required. Professional installation and tuning are strongly recommended. Best For Compatible 2024+ Street Glide front-speaker upgrades Riders starting with a two-speaker amplified system Factory A2B radios requiring aftermarket amplifier integration High-efficiency 2-ohm Coaxial Horn speakers Systems requiring built-in DSP tuning and crossover control Riders planning to add rear speakers later Professional Street Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXPCH-4X2SG FAQ What impedance are the included speakers? Both included CH65.2C speakers have a nominal impedance of 2 ohms. How many speakers are included? The system includes two 6.5-inch CH65.2C Coaxial Horn speakers for the Street Glide fairing. What load does the amplifier see? Each included speaker is connected to its own amplifier channel, so each loaded front channel operates at a nominal 2-ohm load. Are all four amplifier channels used? No. The base package uses two amplified channels for the two front speakers. The other two channels remain available for a compatible rear-speaker upgrade. How much power does the amplifier produce? The FLX700.4PRO produces up to 175 watts RMS × 4 at 2 ohms or 120 watts RMS × 4 at 4 ohms when supplied with 14.4 volts. Does the amplifier include a DSP? Yes. The FLX700.4PRO includes a six-channel DSP with four amplified channels and two processed pass-through channels. Why does the package use a non-DSP ZEN-H interface? The ZEN-H interface extracts the factory A2B signal. DSP processing is then performed inside the FLX700.4PRO amplifier. Are Street Glide fairing grilles included? Yes. The package includes the Cicada Audio 24CHDSGG powder-coated steel fairing grille pair. Is the amplifier rack included? Yes. The package includes the 24HDAR-SG Street Glide amplifier rack and its mounting hardware. Is rear-speaker wiring included? Yes. The 24HDRO rear-output harness is included for future rear-speaker expansion. Are rear speakers included? No. The system is rear-speaker ready, but rear speakers and their saddlebag mounting components must be purchased separately. Does the system require tuning? Yes. The amplifier DSP, crossover frequencies, equalization, limiters and gain structure must be configured for the included speakers and any future rear-speaker expansion. Need Help Planning Your Street Glide System? Submit your Street Glide year, trim, factory audio package and future rear-speaker plans so Garage Bagger Stereo can verify fitment, electrical requirements and the correct expansion components for your motorcycle. Installation Services Request a Custom Build -
Cicada Audio 24FLXPCH-4X4RG 1400W DSP 4-Speaker System for 2024+ Road Glide
Vendor:Cicada AudioCOMPLETE 2024+ ROAD GLIDE DSP AUDIO SYSTEM Cicada Audio 24FLXPCH-4X4RG 1400W DSP 4-Speaker System Build a complete high-output audio system in a compatible 2024 and newer Harley-Davidson Road Glide with four Cicada Audio coaxial horn speakers, a four-channel DSP amplifier and direct factory A2B radio integration. The package powers two 6.5-inch front fairing speakers and two 6×9-inch saddlebag speakers from four dedicated amplifier channels. Road Glide grilles, an amplifier rack, a saddlebag lid cut-in system, power wiring and rear-output wiring are included for the complete installation. See Everything Included View Speaker Configuration Complete Four-Speaker Road Glide System Designed for compatible 2024+ Road Glide motorcycles FLX1400.4PRO amplifier with six-channel DSP 225 watts RMS × 4 channels at 4 ohms Two CH65.4C 6.5-inch fairing speakers Two CH69.4W 6×9 saddlebag speakers All four included speakers are 4 ohms Road Glide fairing grilles included 2024+ saddlebag lid cut-in kit included NAV-TV ZEN-H A2B integration included 4-AWG amplifier power kit included Rear-output wiring harness included Road Glide amplifier rack included 24FLXPCH-4X4RG Complete System Overview The Cicada Audio 24FLXPCH-4X4RG combines the primary audio, integration, wiring and mounting components required to create a complete amplified four-speaker system in a compatible 2024 and newer Harley-Davidson Road Glide. Two CH65.4C 6.5-inch coaxial horn speakers install in the Road Glide front fairing. Two CH69.4W 6×9-inch coaxial horn speakers install in the factory saddlebag lids using the included 24CHDLID cut-in mounting system. The FLX1400.4PRO powers all four speakers and supplies the crossover, equalization, time alignment and output-control functions required to tune the complete motorcycle audio system. Four-speaker DSP configuration: This bundle uses four 4-ohm speakers. Do not substitute the 2-ohm CHX65.2 or CHX69.2 speaker configuration used in the standard non-DSP package without redesigning the amplifier load and DSP tune. Four-Channel Speaker and Amplifier Configuration Front Fairing Channels Two CH65.4C 6.5-inch speakers create the Road Glide front soundstage. Each speaker presents a nominal 4-ohm load to its own FLX1400.4PRO amplifier channel. Rear Saddlebag Channels Two CH69.4W 6×9-inch speakers create the rear soundstage. Each saddlebag speaker presents a nominal 4-ohm load to its own amplifier channel. Channel 1 Front-left CH65.4C — 4Ω Channel 2 Front-right CH65.4C — 4Ω Channel 3 Rear-left CH69.4W — 4Ω Channel 4 Rear-right CH69.4W — 4Ω Amplifier Output 225W RMS per channel at 4Ω Speaker RMS Rating 250W RMS per speaker Unused Amplified Channels None DSP Pass-Through Outputs Two processed channels for compatible future expansion Power matching: The amplifier supplies 225 watts RMS to each 4-ohm speaker channel. Each included speaker is rated for 250 watts RMS. Correct gain, crossover, limiter and DSP settings are still required for reliable operation. Everything Included in the Complete System FLX1400.4PRO DSP Amplifier One four-channel Class-D amplifier with four amplified DSP channels, two processed pass-through channels, Bluetooth audio streaming and USB-C computer tuning. CH65.4C Fairing Speaker Pair Two 4-ohm Larry Frederick Classic 6.5-inch coaxial horn speakers for the Road Glide front fairing. CH69.4W Saddlebag Speaker Pair Two 4-ohm 6×9-inch all-weather coaxial horn speakers for the rear saddlebag lid locations. 24CHDRGG Road Glide Grilles Powder-coated steel front fairing grilles with Cicada Audio-branded emblems for compatible 2024+ Road Glide motorcycles. 24CHDLID Saddlebag Lid Kit Complete 2024+ cut-in mounting system with angled top-load 6×9 baffles, powder-coated steel grilles, clamping rings, gaskets, cutting templates, rain covers and crossover-storage tethers. HDPG4K 4-AWG Power Kit Heavy-gauge power and ground wiring, Harley-compatible remote trigger wiring, waterproof Mini-ANL fuse holder and multiple fuse values. 24HDZENHCAKIT A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect harness and positive-locking Molex connections. 24HDRO Rear-Output Harness Plug-and-play rear-speaker harness with factory-style connectors, short extensions and longer leads for routing audio to the saddlebags. 24HDAR-RG Amplifier Rack Black-anodized aluminum amplifier rack designed for compatible OEM Road Glide mounting locations and Cicada FLX-style amplifiers. FLX1400.4PRO Six-Channel DSP Amplifier The FLX1400.4PRO combines a high-power four-channel Class-D amplifier with six channels of digital signal processing. Four DSP channels feed the internal amplifier, while two processed pass-through outputs can feed compatible future amplifiers. 225W × 4 at 4Ω Supplies 225 watts RMS to each included 4-ohm coaxial horn speaker. 350W × 4 at 2Ω Supports compatible 2-ohm configurations when the complete speaker and tuning design is changed accordingly. 700W × 2 Bridged The published bridged output is 700 watts RMS × 2 into compatible 4-ohm loads. Six DSP Channels Four amplified and two pass-through DSP channels support precise system control and later expansion. Bluetooth Streaming Built-in Bluetooth audio streaming provides a direct source for compatible tuning, testing and playback. USB-C Computer Tuning USB-C connectivity supports PC-based DIALD DSP configuration and detailed system tuning. FLX1400.4PRO Amplifier Specifications Amplifier Model FLX1400.4PRO Amplifier Type Four-channel Class-D amplifier with six-channel DSP DSP Configuration Four amplified channels and two pass-through channels Output at 4Ω 225W RMS × 4 channels at 14.4V Output at 2Ω 350W RMS × 4 channels at 14.4V Bridged Output at 4Ω 700W RMS × 2 channels at 14.4V Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 THD + Noise 0.1% at 2Ω per channel at 10% rated power Efficiency 80% Crossover Modes High-pass, band-pass and low-pass Crossover Range 20Hz–20kHz Crossover Slopes 6, 12, 24 or 48dB per octave Input Sensitivity 0.2V–12V Operating Voltage 9V–16V Music Current Draw 70A Maximum Current Draw 150A Recommended Fuse 100A for the published music-load specification Power Input 4-AWG Speaker Outputs 12-AWG busbar-style terminals Turn-On Modes REM, DC or VOX Dimensions with Brackets 8.26 × 4.9 × 2 inches / 210 × 125 × 51mm Chassis Dimensions 7.1 × 4.9 × 2 inches / 180 × 125 × 51mm CH65.4C Front Fairing Speakers The CH65.4C pair uses Cicada Audio’s Larry Frederick Classic coaxial horn design. Each speaker combines a 6.5-inch mid-bass driver, aluminum horn tweeter and an external 12dB crossover. Speaker Model CH65.4C Quantity Two speakers / one pair Nominal Size 6.5 inches Nominal Impedance 4Ω per speaker Power Handling 250W RMS / 500W maximum per speaker Mid-Bass Voice Coil 2 inches / 51mm Tweeter Voice Coil 1.4 inches / 36mm Tweeter Dome Aluminum Cone Water-resistant treated paper Magnet N35SH neodymium Crossover External 12dB crossover at 4kHz Sensitivity 96.4dB, 1W / 1m Frequency Response 75Hz–20kHz ±5dB Mounting Depth 3 inches / 76.2mm Mounting Diameter 5.7 inches / 145.5mm CH69.4W Saddlebag Speakers The CH69.4W pair provides high-output rear audio from the Road Glide saddlebag lids. Each speaker combines a water-resistant treated-paper cone, aluminum horn tweeter, external crossover and neodymium motor. Speaker Model CH69.4W Quantity Two speakers / one pair Nominal Size 6×9 inches Nominal Impedance 4Ω per speaker Power Handling 250W RMS / 500W maximum per speaker Mid-Bass Voice Coil 2.5 inches / 64mm Tweeter Voice Coil 1.4 inches / 36mm Tweeter Dome Aluminum Cone Water-resistant treated paper Magnet N35SH neodymium Crossover External 12dB crossover with -3dB and -6dB tweeter attenuation Sensitivity 95dB Frequency Response 75Hz–20kHz ±3dB Mounting Depth 3.7 inches / 93mm Mounting Opening 6.6 × 9.3 inches / 155 × 226mm Built-In DSP and System Tuning Front and Rear Crossovers Configure independent filtering for the 6.5-inch front speakers and 6×9-inch rear speakers. Equalization Shape the system response around the Road Glide fairing, saddlebag locations and open-air riding environment. Time Alignment Correct arrival-time differences between the front and rear speaker locations for a more coherent soundstage. Output Limiting Control maximum clean output to protect the speakers from clipping, thermal stress and excessive mechanical excursion. Tweeter-Level Control Combine DSP adjustment with the external crossover attenuation options to balance upper-frequency projection. Future Expansion Two processed pass-through outputs can support a compatible additional amplifier for later system expansion. Professional tuning recommended: The correct DSP settings depend on speaker placement, acoustic loading, desired listening level and the motorcycle’s complete electrical and audio configuration. NAV-TV A2B Signal Integration The included 24HDZENHCAKIT uses the NAV-TV ZEN-H to extract the compatible factory Harley-Davidson A2B audio signal. Cicada’s direct-connect harness routes the signal into the FLX1400.4PRO through correctly pinned locking connectors. Compatible 2024+ Harley-Davidson A2B factory signal integration No cutting or splicing of the factory signal harness Correctly pinned Cicada amplifier connections Automotive-grade materials and locking connectors Compact routing inside the Road Glide fairing Stable signal delivery to the DSP amplifier DSP clarification: The included ZEN-H interface is the non-DSP version. The FLX1400.4PRO amplifier provides the system’s digital signal processing. 24CHDLID Saddlebag Lid Installation The included 24CHDLID system converts compatible 2024 and newer factory Harley-Davidson saddlebag lids into top-load 6×9-inch speaker locations. The angled baffles direct the rear-speaker output toward the rider. Top-Load Baffle System The speaker installs from the top of the lid for easier service and improved support of full-depth 6×9-inch drivers. Steel Speaker Grilles Heavy-duty powder-coated steel mesh protects the rear speakers from contact and debris. Gasketed Clamp System Clamping rings and gaskets help seal the completed openings against water intrusion and unwanted rattles. Precision Templates Molded cutting templates support accurate placement of the permanent saddlebag lid openings. Rain Covers Rainproof lid covers provide additional speaker protection while the motorcycle is parked or being washed. Crossover Pouches and Tethers Included lid tethers and crossover-storage pouches support a secure, organized rear-speaker installation. Permanent saddlebag modification required: Both factory lids must be cut for the included rear-speaker system. Verify template placement, speaker clearance and wiring before making any permanent modifications. Road Glide Grilles and Amplifier Rack 24CHDRGG Fairing Grilles Powder-coated steel grilles are engineered for compatible 2024+ Road Glide front speaker locations and include Cicada Audio-branded emblems. 24HDAR-RG Amplifier Rack The black-anodized aluminum rack uses compatible OEM amplifier mounting locations and predrilled holes for FLX-style amplifiers. Power Wiring and Fuse Protection The HDPG4K includes six-foot 4-AWG power and ground cables with braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring and a waterproof Mini-ANL fuse holder. Power Cable 4-AWG with battery ring terminal and amplifier ferrule Ground Cable 4-AWG with battery ring terminal and amplifier ferrule Remote Trigger Harley-compatible trigger lead Fuse Holder Waterproof Mini-ANL Included Fuse Values 60A, 80A and 100A Amplifier Recommendation 100A for the published FLX1400.4PRO music-load specification Electrical-system inspection required: Verify the motorcycle battery, charging output, cable routing, ground quality and fuse installation before operating the system at high output. Complete System Specifications Complete System SKU 24FLXPCH-4X4RG Vehicle Application Compatible 2024 and newer Harley-Davidson Road Glide Amplifier FLX1400.4PRO four-channel amplifier with six-channel DSP Amplifier Output at 4Ω 225W RMS × 4 channels Front Speakers Two CH65.4C 6.5-inch coaxial horn speakers Rear Speakers Two CH69.4W 6×9-inch coaxial horn speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 250W RMS / 500W maximum per speaker Loaded Amplifier Channels All four channels at 4Ω each DSP Pass-Through Channels Two Factory Signal Interface NAV-TV ZEN-H non-DSP A2B interface with Cicada harness Front Grilles 24CHDRGG Road Glide fairing grilles Rear Mounting System 24CHDLID 2024+ saddlebag lid cut-in kit Rear Speaker Wiring 24HDRO plug-and-play harness Power Wiring HDPG4K 4-AWG installation kit Amplifier Rack 24HDAR-RG Road Glide amplifier rack Saddlebag Cutting Required Yes Shopify Variants None Fitment and Ordering Notes Confirm the complete motorcycle configuration: Verify the Road Glide year, trim, factory radio, factory amplifier, A2B audio system, saddlebag type and electrical condition before ordering. Designed for compatible 2024 and newer Road Glide motorcycles. The package includes four 4-ohm speakers. All four amplifier channels are used in the supplied configuration. Each speaker connects to its own amplifier channel. The FLX1400.4PRO supplies the system DSP processing. The included NAV-TV ZEN-H is the non-DSP A2B interface. The front Road Glide fairing grilles are included. The rear saddlebag lid cut-in mounting system is included. Both factory saddlebag lids require permanent cutting. Rear speaker wiring is included. Professional installation and DSP tuning are strongly recommended. Best For Compatible 2024+ Road Glide complete audio upgrades Riders wanting front fairing and saddlebag speakers Factory A2B radio systems requiring aftermarket integration Four-channel systems using matched 4-ohm speaker loads High-output coaxial horn motorcycle audio systems Systems requiring built-in DSP tuning and output control Professional Road Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXPCH-4X4RG FAQ How many speakers are included? The system includes four speakers: two CH65.4C 6.5-inch fairing speakers and two CH69.4W 6×9-inch saddlebag speakers. What impedance are the included speakers? Every included speaker has a nominal impedance of 4 ohms. Are these the 2-ohm CHX speakers? No. The official DSP bundle specifies 4-ohm CH65.4C and CH69.4W coaxial horn speakers. How much power does each speaker receive? The FLX1400.4PRO supplies up to 225 watts RMS to each speaker channel at 4 ohms. How much power can each speaker handle? Each included speaker is rated for 250 watts RMS and 500 watts maximum. Are all four amplifier channels used? Yes. Two channels power the front speakers and two channels power the rear saddlebag speakers. Are any DSP outputs available for expansion? Yes. The amplifier provides two processed pass-through DSP outputs for a compatible future external amplifier. Does the amplifier include DSP? Yes. The FLX1400.4PRO contains six DSP channels: four amplified and two pass-through channels. Does the NAV-TV interface include DSP? No. The package uses the non-DSP ZEN-H interface for factory A2B signal integration. The Cicada amplifier performs the DSP processing. Are Road Glide fairing grilles included? Yes. Cicada 24CHDRGG powder-coated steel front grilles are included. Are saddlebag speaker mounts included? Yes. The complete 24CHDLID 6×9-inch saddlebag lid cut-in system is included. Do the factory saddlebag lids need to be cut? Yes. The included rear-speaker system requires permanent modification of both factory saddlebag lids. Is rear-speaker wiring included? Yes. The package includes the 24HDRO plug-and-play rear-output harness. What fuse does the amplifier require? Cicada publishes a 100-amp recommended fuse for the FLX1400.4PRO music-load specification. The included HDPG4K kit includes a 100-amp fuse. Is the Road Glide amplifier rack included? Yes. The package includes the 24HDAR-RG black-anodized aluminum amplifier rack and mounting hardware. Is professional tuning recommended? Yes. The front and rear speaker locations, external crossovers, amplifier output and high-power operating levels make professional DSP setup strongly recommended. Need Help Planning Your Road Glide System? Garage Bagger Stereo can help verify Road Glide fitment, speaker impedance selection, amplifier matching, fairing and saddlebag mounting, power and speaker wiring, and factory A2B signal integration before the system is installed. Installation Services Request a Custom Build -
Cicada Audio 24FLXPCH-4X4SG 1400W DSP 4-Speaker System for 2024+ Street Glide
Vendor:Cicada AudioCOMPLETE 2024+ STREET GLIDE DSP AUDIO SYSTEM Cicada Audio 24FLXPCH-4X4SG 1400W DSP 4-Speaker System Build a complete high-output audio system in a compatible 2024 and newer Harley-Davidson Street Glide with four Cicada Audio coaxial horn speakers, a powerful four-channel DSP amplifier and direct factory A2B radio integration. The package powers two 6.5-inch fairing speakers and two 6×9-inch saddlebag speakers from four dedicated amplifier channels. It also includes the Street Glide grilles, amplifier rack, saddlebag lid cut-in system, power wiring and rear-output harness required for the complete installation. See Everything Included View Speaker Configuration Complete Four-Speaker System Designed for compatible 2024+ Street Glide motorcycles FLX1400.4PRO amplifier with six-channel DSP 225 watts RMS × 4 channels at 4 ohms Two CH65.4C 6.5-inch fairing speakers Two CH69.4W 6×9 saddlebag speakers All four included speakers are 4 ohms Street Glide fairing grilles included 2024+ saddlebag lid cut-in kit included NAV-TV ZEN-H A2B integration included 4-AWG amplifier power kit included Rear-output wiring harness included Street Glide amplifier rack included 24FLXPCH-4X4SG Complete System Overview The Cicada Audio 24FLXPCH-4X4SG combines the main audio, integration, wiring and mounting components required to create a complete amplified four-speaker system in a compatible 2024 and newer Harley-Davidson Street Glide. Two CH65.4C 6.5-inch coaxial horn speakers install in the front fairing. Two CH69.4W 6×9 coaxial horn speakers install in the factory saddlebag lids using the included 24CHDLID cut-in mounting system. The FLX1400.4PRO powers all four speakers and provides the crossover, equalization, delay and output-control functions needed to tune the complete motorcycle audio system. Four-speaker DSP configuration: This package uses four 4-ohm speakers. Do not substitute the 2-ohm CHX65.2 or CHX69.2 speaker configuration used in the standard non-DSP package without redesigning and retuning the system. Four-Channel Speaker and Amplifier Configuration Front Fairing Channels Two CH65.4C 6.5-inch speakers power the Street Glide front soundstage. Each speaker presents a nominal 4-ohm load to its own FLX1400.4PRO amplifier channel. Rear Saddlebag Channels Two CH69.4W 6×9 speakers provide the rear soundstage. Each speaker presents a nominal 4-ohm load to its own amplifier channel. Channel 1 Front-left CH65.4C — 4Ω Channel 2 Front-right CH65.4C — 4Ω Channel 3 Rear-left CH69.4W — 4Ω Channel 4 Rear-right CH69.4W — 4Ω Amplifier Output 225W RMS per channel at 4Ω Speaker RMS Rating 250W RMS per speaker Unused Amplified Channels None DSP Pass-Through Outputs Two channels available for compatible future expansion Power matching: The amplifier supplies 225 watts RMS to each 4-ohm speaker channel. Each included speaker is rated for 250 watts RMS. Correct gain, crossover, limiter and DSP settings are still required for reliable operation. Everything Included in the Complete System FLX1400.4PRO DSP Amplifier One four-channel Class-D amplifier with four amplified DSP channels, two DSP pass-through channels, Bluetooth audio streaming and USB-C computer tuning. CH65.4C Fairing Speaker Pair Two 4-ohm Larry Frederick Classic 6.5-inch coaxial horn speakers for the Street Glide front fairing. CH69.4W Saddlebag Speaker Pair Two 4-ohm 6×9-inch all-weather coaxial horn speakers for the rear saddlebag lid locations. 24CHDSGG Street Glide Grilles Powder-coated steel front fairing grilles with Cicada Audio-branded emblems for compatible 2024+ Street Glide motorcycles. 24CHDLID Saddlebag Lid Kit Complete 2024+ cut-in mounting system with top-load 6×9 baffles, steel grilles, clamping rings, templates, gasketing, tethers and rain covers. HDPG4K 4-AWG Power Kit Heavy-gauge power and ground wiring, remote trigger wiring, waterproof Mini-ANL fuse holder and multiple fuse values. 24HDZENHCAKIT A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect harness and locking Molex connections. 24HDRO Rear-Output Harness Plug-and-play rear-speaker harness with factory-style connectors, extensions and longer leads for routing audio to the saddlebags. 24HDAR-SG Amplifier Rack Black-anodized aluminum amplifier rack designed for compatible OEM Street Glide mounting locations and Cicada FLX amplifiers. FLX1400.4PRO Six-Channel DSP Amplifier The FLX1400.4PRO combines a high-power four-channel Class-D amplifier with six channels of digital signal processing. Four DSP channels feed the internal amplifier, while two additional processed pass-through outputs can feed compatible future amplifiers. 225W × 4 at 4Ω Supplies 225 watts RMS to each included 4-ohm coaxial horn speaker. 350W × 4 at 2Ω Supports compatible future 2-ohm system configurations when the complete speaker and tuning design is changed accordingly. 700W × 2 Bridged at 4Ω The amplifier can also operate as a two-channel bridged amplifier with compatible 4-ohm loads. Six DSP Channels Four amplified and two pass-through DSP channels support precise system control and future expansion. Bluetooth Streaming Built-in Bluetooth audio streaming provides a direct audio source for compatible tuning and testing applications. USB-C Computer Tuning USB-C connectivity supports PC-based DIALD DSP configuration and system tuning. FLX1400.4PRO Amplifier Specifications Amplifier Model FLX1400.4PRO Amplifier Type Four-channel Class-D amplifier with six-channel DSP DSP Configuration Four amplified channels and two pass-through channels Output at 4Ω 225W RMS × 4 channels at 14.4V Output at 2Ω 350W RMS × 4 channels at 14.4V Bridged Output at 4Ω 700W RMS × 2 channels at 14.4V Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 THD + Noise 0.1% at 2Ω per channel at 10% rated power Efficiency 80% Crossover Modes High-pass, band-pass and low-pass Crossover Range 20Hz–20kHz Crossover Slopes 6, 12, 24 or 48dB per octave Input Sensitivity 0.2V–12V Operating Voltage 9V–16V Music Current Draw 70A Maximum Current Draw 150A Recommended Fuse 100A for the published music-load specification Power Input 4-AWG Speaker Outputs 12-AWG busbar-style terminals Turn-On Modes REM, DC or VOX Dimensions with Brackets 8.26 × 4.9 × 2 inches / 210 × 125 × 51mm Chassis Dimensions 7.1 × 4.9 × 2 inches / 180 × 125 × 51mm CH65.4C Front Fairing Speakers The CH65.4C pair uses Cicada Audio’s Larry Frederick Classic coaxial horn design. Each speaker combines a 6.5-inch mid-bass driver, aluminum horn tweeter and external 12dB crossover. Speaker Model CH65.4C Quantity Two speakers / one pair Nominal Size 6.5 inches Nominal Impedance 4Ω per speaker Power Handling 250W RMS / 500W maximum per speaker Mid-Bass Voice Coil 2 inches / 51mm Tweeter Voice Coil 1.4 inches / 36mm Tweeter Dome Aluminum Cone Water-resistant treated paper Magnet N35SH neodymium Crossover External 12dB crossover at 4kHz Sensitivity 96.4dB, 1W / 1m Frequency Response 75Hz–20kHz ±5dB Mounting Depth 3 inches / 76.2mm Mounting Diameter 5.7 inches / 145.5mm CH69.4W Saddlebag Speakers The CH69.4W pair provides high-output rear audio from the Street Glide saddlebag lids. Each speaker combines a water-resistant treated-paper cone, aluminum horn tweeter, external crossover and neodymium motor. Speaker Model CH69.4W Quantity Two speakers / one pair Nominal Size 6×9 inches Nominal Impedance 4Ω per speaker Power Handling 250W RMS / 500W maximum per speaker Mid-Bass Voice Coil 2.5 inches / 64mm Tweeter Voice Coil 1.4 inches / 36mm Tweeter Dome Aluminum Cone Water-resistant treated paper Magnet N35SH neodymium Crossover External 12dB crossover with -3dB and -6dB attenuation options Sensitivity 95dB Frequency Response 75Hz–20kHz ±3dB Mounting Depth 3.7 inches / 93mm Mounting Opening 6.6 × 9.3 inches / 155 × 226mm Built-In DSP and System Tuning Front and Rear Crossovers Configure independent filtering for the 6.5-inch front speakers and 6×9-inch rear speakers. Equalization Shape the system response around the Street Glide fairing, saddlebag locations and open-air riding environment. Time Alignment Correct arrival-time differences between the front and rear speaker locations for a more coherent soundstage. Output Limiting Control maximum clean output to protect the speakers from clipping, thermal stress and excessive mechanical excursion. Tweeter-Level Control Combine DSP adjustment with the external crossover attenuation options to balance upper-frequency projection. Future Expansion Two processed pass-through outputs can support a compatible additional amplifier for later system expansion. Professional tuning recommended: The correct DSP settings depend on speaker placement, available acoustic loading, desired listening level and the motorcycle’s complete electrical and audio configuration. NAV-TV A2B Signal Integration The included 24HDZENHCAKIT uses the NAV-TV ZEN-H to extract the compatible factory Harley-Davidson A2B audio signal. Cicada’s direct-connect harness routes the signal into the FLX1400.4PRO through correctly pinned locking connectors. Compatible 2024+ Harley-Davidson A2B factory signal integration No cutting or splicing of the factory signal harness Correctly pinned Cicada amplifier connections Automotive-grade materials and locking connectors Compact routing inside the Street Glide fairing Stable signal delivery to the DSP amplifier DSP clarification: The included ZEN-H interface is the non-DSP version. The FLX1400.4PRO amplifier provides the system’s digital signal processing. 24CHDLID Saddlebag Lid Installation The included 24CHDLID system converts compatible 2024 and newer factory Harley-Davidson saddlebag lids into top-load 6×9-inch speaker locations. The angled baffles direct the rear-speaker output toward the rider. Top-Load Baffle System The speaker installs from the top of the lid for easier service and improved support of full-depth 6×9 drivers. Steel Speaker Grilles Heavy-duty powder-coated steel mesh protects the rear speakers from contact and debris. Waterproof Gasket System A clamping ring and gasket system help seal the completed opening against water intrusion. Precision Templates Molded cutting templates support accurate placement of the permanent saddlebag lid openings. Rain Covers Rainproof lid covers provide additional speaker protection while the motorcycle is parked or being washed. Crossover Pouches and Tethers Included lid tethers and crossover-storage pouches support a secure, organized rear-speaker installation. Permanent saddlebag modification required: Both factory lids must be cut for the included rear-speaker system. Verify template placement, speaker clearance and wiring before making any permanent modifications. Street Glide Grilles and Amplifier Rack 24CHDSGG Fairing Grilles Powder-coated steel grilles are engineered for compatible 2024+ Street Glide front speaker locations and include Cicada Audio logo emblems. 24HDAR-SG Amplifier Rack The black-anodized aluminum rack uses compatible OEM amplifier mounting locations and predrilled holes for the FLX1400.4PRO. Power Wiring and Fuse Protection The HDPG4K includes six-foot 4-AWG power and ground cables with braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring and a waterproof Mini-ANL fuse holder. Power Cable 4-AWG with battery ring terminal and amplifier ferrule Ground Cable 4-AWG with battery ring terminal and amplifier ferrule Remote Trigger Harley-compatible trigger lead Fuse Holder Waterproof Mini-ANL Included Fuse Values 60A, 80A and 100A Amplifier Recommendation 100A for the published FLX1400.4PRO music-load specification Electrical-system inspection required: Verify the motorcycle battery, charging output, cable routing, ground quality and fuse installation before operating the system at high output. Complete System Specifications Complete System SKU 24FLXPCH-4X4SG Vehicle Application Compatible 2024 and newer Harley-Davidson Street Glide Amplifier FLX1400.4PRO four-channel amplifier with six-channel DSP Amplifier Output at 4Ω 225W RMS × 4 channels Front Speakers Two CH65.4C 6.5-inch coaxial horn speakers Rear Speakers Two CH69.4W 6×9-inch coaxial horn speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 250W RMS / 500W maximum per speaker Loaded Amplifier Channels All four channels at 4Ω each DSP Pass-Through Channels Two Factory Signal Interface NAV-TV ZEN-H non-DSP A2B interface with Cicada harness Front Grilles 24CHDSGG Street Glide fairing grilles Rear Mounting System 24CHDLID 2024+ saddlebag lid cut-in kit Rear Speaker Wiring 24HDRO plug-and-play harness Power Wiring HDPG4K 4-AWG installation kit Amplifier Rack 24HDAR-SG Street Glide amplifier rack Saddlebag Cutting Required Yes Shopify Variants None Fitment and Ordering Notes Confirm the complete motorcycle configuration: Verify the Street Glide year, trim, factory radio, factory amplifier, A2B audio system, saddlebag type and electrical condition before ordering. Designed for compatible 2024 and newer Street Glide motorcycles. The package includes four 4-ohm speakers. All four amplifier channels are used in the supplied configuration. Each speaker is connected to its own amplifier channel. The FLX1400.4PRO supplies the system DSP processing. The included NAV-TV ZEN-H is the non-DSP A2B interface. The front fairing grilles are included. The rear saddlebag lid cut-in mounting system is included. Both factory saddlebag lids require permanent cutting. Rear speaker wiring is included. Professional installation and DSP tuning are strongly recommended. Best For Compatible 2024+ Street Glide complete audio upgrades Riders wanting front fairing and saddlebag speakers Factory A2B radio systems requiring aftermarket integration Four-channel systems using matched 4-ohm speaker loads High-output coaxial horn motorcycle audio systems Systems requiring built-in DSP tuning and output control Professional Street Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXPCH-4X4SG FAQ How many speakers are included? The system includes four speakers: two CH65.4C 6.5-inch fairing speakers and two CH69.4W 6×9 saddlebag speakers. What impedance are the included speakers? Every included speaker has a nominal impedance of 4 ohms. Are these the 2-ohm CHX speakers? No. The current official bundle specifies 4-ohm CH65.4C and CH69.4W coaxial horn speakers. How much power does each speaker receive? The FLX1400.4PRO supplies up to 225 watts RMS to each speaker channel at 4 ohms. How much power can each speaker handle? Each included speaker is rated for 250 watts RMS and 500 watts maximum. Are all four amplifier channels used? Yes. Two channels power the front speakers and two channels power the rear saddlebag speakers. Are any DSP outputs available for expansion? Yes. The amplifier provides two processed pass-through DSP outputs for a compatible future external amplifier. Does the amplifier include DSP? Yes. The FLX1400.4PRO contains six DSP channels: four amplified and two pass-through channels. Does the NAV-TV interface include DSP? No. The package uses the non-DSP ZEN-H interface for factory A2B signal integration. The Cicada amplifier performs the DSP processing. Are Street Glide fairing grilles included? Yes. Cicada 24CHDSGG powder-coated steel front grilles are included. Are saddlebag speaker mounts included? Yes. The complete 24CHDLID 6×9 saddlebag lid cut-in system is included. Do the factory saddlebag lids need to be cut? Yes. The included rear-speaker system requires permanent modification of both factory saddlebag lids. Is rear-speaker wiring included? Yes. The package includes the 24HDRO plug-and-play rear-output harness. What fuse does the amplifier require? Cicada publishes a 100-amp recommended fuse for the FLX1400.4PRO music-load specification. The included HDPG4K kit includes a 100-amp fuse. Is the Street Glide amplifier rack included? Yes. The package includes the 24HDAR-SG black-anodized aluminum amplifier rack and mounting hardware. Is professional tuning recommended? Yes. The front and rear speaker locations, external crossovers, amplifier output and high-power operating levels make professional DSP setup strongly recommended. Need Help Planning Your Street Glide System? Garage Bagger Stereo can help verify Street Glide fitment, speaker impedance selection, amplifier matching, fairing and saddlebag mounting, power and speaker wiring, and factory A2B signal integration before the system is installed. Installation Services Request a Custom Build -
DS18 2014–2023 Harley Front Stage Audio Kit | Road Glide or Street Glide
Vendor:DS18 Motorcycle2014–2023 HARLEY-DAVIDSON FRONT-STAGE AUDIO DS18 Harley-Davidson Front Stage Speaker and Bullet Tweeter Kit Build a stronger front soundstage on a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide with a matched pair of DS18 slim 6.5-inch midrange speakers and fairing-specific replacement grilles preloaded with NVY neodymium bullet tweeters. Each kit combines powerful midrange projection, dedicated high-frequency output, inline tweeter crossovers and a clean OEM-style grille installation. Select the Road Glide or Street Glide version that matches the motorcycle’s fairing. Choose Fairing Style See What Is Included Complete Front-Stage Upgrade Road Glide and Street Glide versions available Designed for compatible 2014–2023 Harley Touring fairings Two PRO-CF6.4SLN slim 6.5-inch midrange speakers 150 watts RMS per midrange speaker 4-ohm nominal impedance per midrange Water-resistant carbon-fiber cones Neodymium midrange motor structure Two 2.5-inch NVY bullet tweeters Inline tweeter crossovers included Direct-fit replacement fairing grilles DS18 Harley Front Stage Kit Overview This DS18 package replaces the factory front speaker locations with higher-output midrange drivers while adding dedicated bullet tweeters directly to the replacement fairing grilles. The PRO-CF6.4SLN speakers are shallow 6.5-inch midrange drivers designed for space-limited motorcycle installations. Their carbon-fiber cones, neodymium motors and 93dB sensitivity help deliver strong vocals, guitars and upper midrange frequencies through wind, road and exhaust noise. The NVY grille assemblies place one bullet tweeter on each side of the fairing. Inline crossovers filter lower frequencies before they reach the tweeters, while the fairing-specific grille design maintains a clean factory-style appearance. Road Glide and Street Glide Variants 2014–2023 Road Glide Includes the PRO-CF6.4SLN midrange speaker pair and the NVY-HDGRGTW.1423LD Road Glide grille and bullet tweeter package. The grilles are shaped for compatible sharknose fairing speaker locations. Package SKU: PRO-CF6.4SLN.2pk + NVY-HDGRGTW.1423LD Road Glide-specific replacement grille pair 102dB published tweeter sensitivity 2014–2023 Street Glide Includes the PRO-CF6.4SLN midrange speaker pair and the NVY-HDGSGTW.1423LD Street Glide grille and bullet tweeter package. The grilles are shaped for compatible batwing fairing speaker locations. Package SKU: PRO-CF6.4SLN.2pk + NVY-HDGSGTW.1423LD Street Glide-specific replacement grille pair 105dB published tweeter sensitivity Select the correct variant: Road Glide and Street Glide fairings use different grille shapes and mounting systems. Confirm the exact motorcycle year, model and fairing before ordering. Speaker Impedance and Amplifier Planning Midrange Impedance Each PRO-CF6.4SLN midrange speaker has a nominal impedance of 4 ohms. Tweeter Impedance Each grille-mounted NVY bullet tweeter has a nominal impedance of 4 ohms and must be used with its crossover filtering. Final Channel Load The final amplifier load depends on how the midrange and crossover network are connected. Verify the complete wiring configuration before selecting or configuring an amplifier. Do not assume a constant 2-ohm load: A 4-ohm midrange and a 4-ohm tweeter connected through a frequency-selective crossover do not behave like two unfiltered full-range resistive loads. Confirm amplifier stability with the final wiring and crossover arrangement. Everything Included in the Front Stage Kit Two PRO-CF6.4SLN Midrange Speakers One matched pair of slim-profile 6.5-inch midrange loudspeakers rated at 150 watts RMS and 300 watts maximum per speaker. Fairing-Specific Replacement Grilles One left-and-right Road Glide or Street Glide replacement grille pair, depending on the selected Shopify variant. Two NVY Bullet Tweeters Each replacement grille is preloaded with one 2.5-inch neodymium bullet tweeter for dedicated high-frequency output. Two Inline Crossovers The included crossover modules filter damaging lower frequencies before they reach the bullet tweeters. Package contents: This listing includes the front midrange speaker pair, selected fairing grille pair, two preinstalled bullet tweeters and inline crossover filtering. An amplifier, DSP, amplifier wiring and unrelated rear speakers are not included. Why Riders Choose This DS18 Front Stage Highway-Ready Midrange The midrange speakers emphasize the vocal and instrument frequencies that must overcome wind, engine and road noise. Dedicated High Frequencies Grille-mounted bullet tweeters improve the projection of vocals, cymbals and upper-frequency detail. Slim Speaker Design The shallow PRO-CF6.4SLN frame is engineered for compact motorcycle fairing installations where mounting depth is limited. Carbon-Fiber Cones Water-resistant carbon-fiber cones provide a rigid, lightweight diaphragm for clear and controlled midrange output. Neodymium Motors Lightweight neodymium motor structures reduce unnecessary weight while supporting efficient speaker output. OEM-Style Appearance The tweeters are integrated into vehicle-specific replacement grilles rather than mounted in unrelated external pods. PRO-CF6.4SLN Midrange Specifications Midrange Model PRO-CF6.4SLN Quantity Two speakers / one pair Nominal Size 6.5 inches / 165mm Speaker Type Slim-profile midrange loudspeaker Nominal Impedance 4Ω per speaker RMS Power Handling 150 watts per speaker Maximum Power Handling 300 watts per speaker Sensitivity 93dB, 1W / 1M Frequency Response 100Hz–6kHz Cone Material Water-resistant carbon fiber Magnet Material Neodymium Mounting Profile Slim / shallow motorcycle installation design NVY Bullet Tweeter and Grille Specifications Road Glide Grille Model NVY-HDGRGTW.1423LD Street Glide Grille Model NVY-HDGSGTW.1423LD Grille Quantity Two / matched left-and-right pair Tweeter Quantity Two / one preinstalled in each grille Tweeter Size 2.5 inches / 65mm Nominal Impedance 4Ω per tweeter Package Peak Power Rating 200 watts per tweeter pair Road Glide Tweeter Sensitivity 102dB Street Glide Tweeter Sensitivity 105dB Frequency Response 2kHz–20kHz Recommended High-Pass 4kHz Crossover Protection Inline crossover modules included Magnet Material Neodymium Weather Protection IP65-rated tweeter construction Grille Protection UV-resistant construction with waterproof cloth backing Installation Style Fairing-specific direct-fit replacement grille Midrange and Tweeter System Design Midrange Frequency Coverage The PRO-CF6.4SLN speakers reproduce the vocal, guitar and upper midrange frequencies that provide most of the system’s perceived clarity and projection. High-Frequency Coverage The bullet tweeters extend the front stage into the upper frequencies while the inline crossovers protect them from lower frequency energy. This is not a full-range bass system: The PRO-CF6.4SLN is a dedicated midrange speaker. System design should use appropriate high-pass filtering and, where stronger bass is required, separate mid-bass or subwoofer drivers. Amplifier and Crossover Setup Use an amplifier that is stable with the final connected channel load. Match amplifier output to the 150-watt RMS rating of each midrange speaker. Use the supplied inline crossover modules with the bullet tweeters. Do not send unfiltered bass or midrange energy directly to the tweeters. Use appropriate high-pass filtering on the PRO-CF6.4SLN midranges. Set amplifier gain with clean measured output rather than by volume position alone. Verify speaker and tweeter polarity on both sides of the fairing. Secure the crossovers and wiring against vibration and fairing-panel contact. Confirm that all wiring is protected from heat, sharp edges and moving components. Professional installation and system tuning are recommended. Complete Kit Specifications Brand DS18 Product Type Harley-Davidson front-stage component speaker kit Vehicle Applications Compatible 2014–2023 Road Glide or Street Glide Shopify Option Fairing Style Road Glide SKU PRO-CF6.4SLN.2pk + NVY-HDGRGTW.1423LD Street Glide SKU PRO-CF6.4SLN.2pk + NVY-HDGSGTW.1423LD Midrange Speakers Two PRO-CF6.4SLN 6.5-inch slim midranges Midrange Impedance 4Ω per speaker Midrange Power 150W RMS / 300W maximum per speaker Midrange Sensitivity 93dB Midrange Frequency Response 100Hz–6kHz Tweeters Two 2.5-inch NVY neodymium bullet tweeters Tweeter Impedance 4Ω per tweeter Tweeter Sensitivity 102dB Road Glide / 105dB Street Glide Tweeter Crossovers Two inline crossover modules included Grilles One fairing-specific left-and-right replacement pair Weather Protection Water-resistant carbon-fiber cones and IP65-rated tweeters Amplifier Included No Fitment and Ordering Notes Verify the complete installation: Confirm the motorcycle year, exact model, fairing type, current front speaker enclosure, available mounting depth, amplifier configuration and wiring before ordering. Select the Road Glide or Street Glide variant before adding to cart. The replacement grilles are not interchangeable between fairing styles. The kit is intended for compatible 2014–2023 Touring fairings. Each included midrange speaker has a nominal impedance of 4 ohms. Each included bullet tweeter has a nominal impedance of 4 ohms. Inline tweeter crossovers are included and must remain in the signal path. Confirm midrange mounting depth and enclosure clearance before assembly. Confirm crossover placement before snapping or bolting the grilles into place. An amplifier and amplifier wiring are not included. Professional installation and tuning are recommended. Best For 2014–2023 Road Glide front-stage audio upgrades 2014–2023 Street Glide front-stage audio upgrades Riders who need stronger vocal projection at highway speeds Systems requiring separate midrange and high-frequency drivers Fairing installations with limited speaker mounting depth Harley audio systems using an aftermarket amplifier or DSP Installations that need a clean factory-style grille appearance Related Motorcycle Audio Categories Motorcycle Speaker Upgrades Shop Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Parts Signal and System Support Motorcycle DSP and Signal Integration 2023.5+ / 2024+ Harley Plug-and-Play Kits Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries DS18 Harley Front Stage Kit FAQ What comes with this DS18 Harley front-stage kit? The kit includes two PRO-CF6.4SLN slim 6.5-inch midrange speakers, one pair of fairing-specific replacement grilles, two preinstalled NVY bullet tweeters and two inline tweeter crossover modules. Does this listing cover both Road Glide and Street Glide? Yes. Choose the Road Glide or Street Glide variant. Each option uses a different grille assembly matched to its specific fairing. What impedance are the midrange speakers? Each PRO-CF6.4SLN midrange speaker has a nominal impedance of 4 ohms. What impedance are the bullet tweeters? Each grille-mounted bullet tweeter has a nominal impedance of 4 ohms. Does the complete system create a 2-ohm load? Do not assume a constant 2-ohm load. The tweeter uses a frequency-selective crossover, so the final impedance varies with frequency and depends on the actual wiring arrangement. How much power can the midrange speakers handle? Each midrange speaker is rated for 150 watts RMS and 300 watts maximum. What is the difference between the Road Glide and Street Glide tweeters? The grille shapes are different. DS18 also publishes 102dB tweeter sensitivity for the Road Glide package and 105dB for the Street Glide package. Are the tweeter crossovers included? Yes. Inline crossover modules are supplied with the grille and tweeter assemblies. Can the tweeters be connected without the crossovers? No. The tweeters require crossover or high-pass protection to prevent damaging lower frequencies from reaching the high-frequency drivers. Are these full-range speakers? The PRO-CF6.4SLN is a dedicated midrange loudspeaker. The grille-mounted tweeters supply the upper frequencies. Additional mid-bass or subwoofers may be needed for stronger low-frequency output. Is an amplifier included? No. This package contains the speakers, tweeter grilles and crossover modules. The amplifier, DSP and amplifier wiring are sold separately. Are the components weather resistant? The midranges use water-resistant carbon-fiber cones. The tweeters are IP65 rated, and the grille assemblies use UV-resistant construction with protective cloth backing. Need Help Matching This DS18 Front Stage? Garage Bagger Stereo can help verify Road Glide or Street Glide fitment, speaker impedance, amplifier matching, mounting clearance, crossover wiring and factory or aftermarket signal integration before the system is installed. Installation Services Request a Custom Build
-
Cicada Audio 24FLXCHX-4X4RG 1400W 4-Speaker System for 2024+ Road Glide
Vendor:Cicada AudioCOMPLETE 2024+ ROAD GLIDE AUDIO SYSTEM Cicada Audio 24FLXCHX-4X4RG 1400W 4-Speaker Audio System The Cicada Audio 24FLXCHX-4X4RG is a complete front-and-rear audio system for compatible 2024 and newer Harley-Davidson Road Glide motorcycles. It combines a high-output four-channel amplifier, four 2-ohm Pro Coaxial Horn speakers, A2B factory-radio integration, Road Glide-specific mounting components and the wiring required to connect the system. See Everything Included View Speaker Load Complete Front and Rear Upgrade Designed for compatible 2024+ Road Glide motorcycles FLX1400.4 four-channel Class-D amplifier 350 watts RMS × 4 channels at 2Ω and 14.4 volts Standard amplifier without built-in DSP Four 2Ω Pro Coaxial Horn speakers Two 6.5-inch fairing speakers Two 6×9-inch saddlebag speakers NAV-TV ZEN-H A2B factory-radio integration Road Glide amplifier rack and wiring included 6×9 saddlebag lid cut-in mounting system 24FLXCHX-4X4RG Complete System Overview This manufacturer-matched Cicada Audio package combines the amplifier, speakers, factory-radio interface, power wiring, speaker wiring and Road Glide-specific mounting components needed for a four-channel motorcycle audio upgrade. Two CHX65.2 6.5-inch Pro Coaxial Horn speakers install in the Road Glide fairing. Two CHX69.2 6×9-inch Pro Coaxial Horn speakers install in the factory saddlebag lids using the included 24CHDLID cut-in mounting system. All four speakers are 2-ohm models. Each speaker connects to an individual channel of the FLX1400.4 amplifier, creating a 2-ohm nominal load on each of the amplifier’s four channels. Standard Non-DSP Amplifier Configuration FLX1400.4 Power Amplifier This package includes the standard Cicada Audio FLX1400.4 four-channel amplifier. It provides high-output Class-D power but does not contain an integrated digital signal processor. NAV-TV ZEN-H A2B Integration The included NAV-TV ZEN-H interface and Cicada Audio harness extract the factory A2B audio signal and provide direct-connect amplifier integration without cutting the factory signal harness. No built-in DSP: This 24FLXCHX system uses the standard FLX1400.4 amplifier. It should not be confused with Cicada systems using the FLX1400.4PRO amplifier with an integrated DSP. Speaker Impedance and Amplifier Channel Load Front Fairing: 2Ω The package includes one pair of CHX65.2 6.5-inch Pro Coaxial Horn speakers. Each front speaker has a nominal impedance of 2 ohms. Rear Saddlebags: 2Ω The package includes one pair of CHX69.2 6×9-inch Pro Coaxial Horn speakers. Each rear speaker has a nominal impedance of 2 ohms. Amplifier Load: 2Ω × 4 One speaker is connected to each amplifier channel, presenting a 2-ohm nominal load to each of the four channels. Front Left Channel One CHX65.2 speaker — 2Ω Front Right Channel One CHX65.2 speaker — 2Ω Rear Left Channel One CHX69.2 speaker — 2Ω Rear Right Channel One CHX69.2 speaker — 2Ω Final Intended Load 2Ω nominal per amplifier channel Speaker impedance: This package does not include selectable 4-ohm speaker versions. All four supplied speakers are 2-ohm models matched to the FLX1400.4 amplifier’s 2-ohm stereo output. Everything Included in the Complete System FLX1400.4 — 1400W Four-Channel Amplifier One compact Class-D amplifier rated for up to 350 watts RMS × 4 channels at 2 ohms and 14.4 volts. This is the standard FLX1400.4 model without built-in DSP. CHX65.2 — 6.5" Pro Coaxial Horn Speakers One pair of 2-ohm CHX65.2 speakers for the Road Glide fairing. Each speaker is rated for 300 watts RMS and includes an external 12dB crossover with optional tweeter attenuation. CHX69.2 — 6×9" Pro Coaxial Horn Speakers One pair of 2-ohm CHX69.2 speakers for the rear saddlebag lids. Each speaker is rated for 400 watts RMS and includes an external 12dB crossover with optional tweeter attenuation. 24CHDRGG — Road Glide Fairing Grilles One pair of Cicada Audio branded, powder-coated steel fairing grilles engineered for compatible 2024 and newer Road Glide models. 24CHDLID — 6×9" Saddlebag Lid Cut-In Kit A complete left-and-right saddlebag lid mounting system with angled top-load baffles, powder-coated steel grilles, gasketed clamping rings and precision cutout templates. HDPG4K — 4-AWG Amplifier Installation Kit Includes six-foot 4-AWG power and ground cables, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring, a waterproof Mini-ANL fuse holder and multiple fuse values. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface Kit NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect harness and correctly pinned Molex connections for compatible Cicada amplifiers. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, two short extensions and two longer speaker-wire leads for routing amplifier output to the saddlebags. 24HDAR-RG — Road Glide Amplifier Rack Black-anodized aluminum amplifier rack that uses compatible Road Glide OEM amplifier mounting locations. Predrilled FLX amplifier mounting positions and installation hardware are included. FLX1400.4 Amplifier Power 350W × 4 at 2Ω At 14.4 volts, the amplifier produces up to 350 watts RMS on each of its four channels into the included 2-ohm speakers. 225W × 4 at 4Ω The amplifier also supports four-channel 4-ohm operation, although this complete system includes 2-ohm speakers. 700W × 2 Bridged at 4Ω The amplifier supports bridged operation with compatible 4-ohm loads, but this complete package uses four-channel stereo operation. Wide Input Range A 0.2V–12V input sensitivity range supports compatible factory-radio interfaces and aftermarket signal sources. Built-In Crossovers Selectable low-pass, full-range and high-pass modes provide 30Hz–300Hz adjustment with a 12dB-per-octave slope. Compact FLX Chassis The compact aluminum chassis installs on the included Road Glide rack for a secure, vehicle-specific fairing installation. FLX1400.4 Amplifier Specifications Amplifier Model FLX1400.4 Amplifier Type Four-channel Class-D amplifier without built-in DSP Output at 2Ω / 14.4V 350W RMS × 4 channels Output at 2Ω / 12.5V 300W RMS × 4 channels Output at 4Ω / 14.4V 225W RMS × 4 channels Output at 4Ω / 12.5V 200W RMS × 4 channels Bridged Output at 4Ω / 14.4V 700W RMS × 2 channels Bridged Output at 4Ω / 12.5V 600W RMS × 2 channels Frequency Response 20Hz–20kHz ±3dB Operating Voltage 8V–16V Music Current Draw 50A Maximum Current Draw 220A Manufacturer Recommended Fuse 120A Efficiency 79% Damping Factor 200 Signal-to-Noise Ratio 91dB Input Sensitivity 0.2V–12V Turn-On Modes Remote or DC offset Crossover Modes LPF / FULL / HPF Crossover Range 30Hz–300Hz Crossover Slope 12dB per octave Overall Dimensions 7.9 × 4.9 × 2.0 inches / 200 × 125 × 51mm Chassis Dimensions 6.625 × 4.9 × 2.0 inches / 168 × 125 × 51mm CHX65.2 Front Fairing Speakers Model CHX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch Pro Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 300W RMS / 600W maximum per speaker Mid-Bass Voice Coil 2 inches / 51mm Tweeter Voice Coil 1.4 inches / 35.56mm Cone Carbon Matrix Composite™ Tweeter Dome Aluminum Magnet N35SH neodymium Sensitivity 92dB Frequency Response 70Hz–20kHz ±4dB Mounting Depth 2.64 inches / 67mm Mounting Diameter 5.67 inches / 144mm External Crossover 12dB with optional -3dB / -6dB tweeter attenuation CHX69.2 Rear Saddlebag Speakers Model CHX69.2 Quantity Two speakers / one pair Speaker Type 6×9-inch Pro Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 400W RMS / 800W maximum per speaker Mid-Bass Voice Coil 2.5 inches / 64mm Tweeter Voice Coil 1.75 inches / 44mm Cone Carbon Matrix Composite™ Tweeter Dome Aluminum Magnet N35SH neodymium Sensitivity 92dB, 1W / 1M Frequency Response 46Hz–20kHz ±3dB Mounting Depth 3.75 inches / 96mm Mounting Diameter 5.7 × 8.5 inches / 145 × 216mm External Crossover 12dB with optional -3dB / -6dB tweeter attenuation 24CHDLID Saddlebag Lid System The included 24CHDLID is a complete cut-in system designed to convert compatible factory saddlebag lids into reinforced, rider-focused 6×9-inch speaker locations. Left and right angled top-load 6×9-inch speaker baffles Heavy-duty powder-coated steel speaker grilles Secure clamping rings with waterproof gaskets High-strength ASA molded construction ABS molded saddlebag lid cutout templates Heavy-duty replacement lid gasket seals Rainproof lid covers Cicada lid tethers with crossover-storage pouches Die-cut speaker gasketing Permanent lid modification required: Both factory saddlebag lids must be cut using the templates supplied with the 24CHDLID mounting system. Plug-and-Play A2B Integration The included NAV-TV ZEN-H interface extracts the factory digital A2B audio signal. The Cicada direct-connect harness routes that signal into the FLX1400.4 amplifier through correctly pinned locking connectors. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Correctly pinned Molex amplifier connections OEM-grade positive-locking connectors Compact routing inside the Road Glide fairing Automotive-grade construction for motorcycle use Road Glide-Specific Amplifier Mounting The included 24HDAR-RG amplifier rack is designed around compatible OEM amplifier mounting locations inside the 2024 and newer Road Glide fairing. Road Glide-specific amplifier mounting platform Uses compatible OEM amplifier mounting locations Black-anodized aluminum construction Predrilled holes for Cicada FLX-style amplifiers Amplifier-rack mounting hardware included Supports a clean and secure fairing installation Plug-and-Play Versus Cut-In Installation Direct-Fit Components The A2B interface harness, amplifier input connection, rear-output harness and Road Glide amplifier rack use vehicle-specific connectors and mounting points to reduce custom wiring and fabrication. Cut-In Components The rear CHX69.2 speaker installation requires permanent cutting of both factory saddlebag lids using the templates and baffles supplied with the 24CHDLID system. Installation clarification: This is a complete, vehicle-specific integration system, but it is not a completely no-modification installation because the rear saddlebag lid speakers require permanent lid cutting. Complete System Specifications Complete System SKU 24FLXCHX-4X4RG Vehicle Application Compatible 2024 and newer Harley-Davidson Road Glide Amplifier FLX1400.4 four-channel amplifier without built-in DSP Amplifier Output 350W RMS × 4 at 2Ω and 14.4 volts Total Speaker Count Four Pro Coaxial Horn speakers Front Speakers Two CHX65.2 6.5-inch speakers Rear Speakers Two CHX69.2 6×9-inch speakers Speaker Impedance All four speakers are 2Ω Intended Channel Load 2Ω nominal per amplifier channel Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada direct-connect harness Built-In DSP No Front Grilles 24CHDRGG Road Glide fairing grilles Rear Lid System 24CHDLID 6×9-inch cut-in mounting kit Power Wiring HDPG4K 4-AWG amplifier installation kit Rear Speaker Wiring 24HDRO plug-and-play rear-output harness Amplifier Rack 24HDAR-RG Road Glide amplifier mounting rack Shopify Variants None Electrical and Fuse Requirements Confirm the final fuse selection: The FLX1400.4 amplifier documentation lists a recommended 120-amp fuse. The included HDPG4K power kit is supplied with 60-, 80- and 100-amp fuses. Confirm the correct protection value using current Cicada Audio installation guidance before powering the amplifier. Use the included HDPG4K 4-AWG power and ground wiring. Install the correctly rated main fuse close to the battery connection. Do not substitute a larger fuse than the wiring and system can safely support. Use clean, secure and properly prepared power and ground connections. Confirm the motorcycle battery is in good operating condition. Evaluate charging-system capacity before extended high-output use. Protect all wiring from heat, sharp edges and moving components. Secure the amplifier and wiring against motorcycle vibration. Professional electrical installation is strongly recommended. Fitment and Ordering Notes Verify fitment: Confirm the exact Road Glide year, trim, factory radio, factory amplifier configuration, saddlebag style and electrical system before ordering. Designed for compatible 2024 and newer Road Glide motorcycles. The package includes four 2-ohm speakers. The package does not include selectable 4-ohm speaker variants. The amplifier uses one speaker on each of its four channels. The FLX1400.4 amplifier does not include built-in DSP. The A2B interface supports direct factory-radio signal integration. The rear-output harness routes amplifier output to the saddlebags. The factory saddlebag lids require permanent cutting. Amplifier gain and crossover setup are required. Professional installation is strongly recommended. Best For Compatible 2024+ Road Glide audio upgrades Four-speaker front-and-rear motorcycle audio systems Factory A2B radio systems requiring aftermarket integration High-output 2-ohm Pro Coaxial Horn speaker systems Riders adding 6×9-inch speakers to factory saddlebag lids Systems using a standard four-channel amplifier without built-in DSP Professional Road Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCHX-4X4RG FAQ What ohm speakers come with this system? All four included speakers are 2-ohm models. The front pair is CHX65.2, and the rear saddlebag pair is CHX69.2. What load does the amplifier see? Each amplifier channel powers one 2-ohm speaker. The intended system configuration therefore presents a 2-ohm nominal load to each of the amplifier’s four channels. How much power does the amplifier produce? The FLX1400.4 produces up to 350 watts RMS × 4 channels at 2 ohms and 14.4 volts. Does this system include a DSP amplifier? No. This package includes the standard FLX1400.4 power amplifier without built-in DSP. How many speakers are included? Four speakers are included: two CHX65.2 6.5-inch fairing speakers and two CHX69.2 6×9-inch saddlebag speakers. Does the system integrate with the factory A2B radio? Yes. It includes a NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are the Road Glide fairing grilles included? Yes. The system includes a pair of powder-coated steel 24CHDRGG Cicada-branded Road Glide fairing grilles. Does the system include rear-speaker wiring? Yes. The 24HDRO plug-and-play rear-output harness is included for routing amplifier output to the saddlebag speakers. Does the system include an amplifier rack? Yes. The package includes the 24HDAR-RG black-anodized aluminum Road Glide amplifier rack and mounting hardware. Do the factory saddlebag lids need to be cut? Yes. The included 24CHDLID is a cut-in 6×9-inch mounting system. Installation permanently modifies both factory saddlebag lids. Is this completely plug-and-play? The A2B interface, amplifier signal connections, rear-output harness and amplifier rack are vehicle-specific. The rear speaker installation still requires permanent cutting of the factory saddlebag lids. What fuse should be used with the amplifier? Cicada’s FLX1400.4 amplifier specifications list a recommended 120-amp fuse, while the included HDPG4K kit includes 60-, 80- and 100-amp fuses. Confirm the final fuse value with current Cicada Audio installation guidance before powering the system. Does the system require setup or tuning? Yes. Amplifier gains, high-pass filters and the external speaker crossovers must be configured correctly. Advanced equalization, time alignment and limiting require a separate compatible DSP. Need Help Confirming Your Road Glide System? Submit your Road Glide year, trim, factory audio package and current electrical setup so Garage Bagger Stereo can verify system fitment, installation requirements and the supporting components needed for your motorcycle. Request a Custom Audio Build View Installation Services -
Cicada Audio 24FLXCHX-4X4SG 1400W 4-Speaker Audio System for 2024+ Street Glide
Vendor:Cicada AudioCOMPLETE 2024+ STREET GLIDE AUDIO SYSTEM Cicada Audio 24FLXCHX-4X4SG 1400W 4-Speaker Audio System The Cicada Audio 24FLXCHX-4X4SG is a complete front-and-rear audio system for compatible 2024 and newer Harley-Davidson Street Glide motorcycles. It combines a high-output four-channel amplifier, four 2-ohm Pro Coaxial Horn speakers, factory A2B radio integration, Street Glide-specific mounting components and the wiring needed to connect the complete system. See Everything Included View Speaker Load Complete Front and Rear Upgrade Designed for compatible 2024+ Street Glide motorcycles FLX1400.4 four-channel Class-D amplifier 350 watts RMS × 4 channels at 2Ω and 14.4V Standard non-DSP amplifier configuration Four 2Ω Pro Coaxial Horn speakers Two 6.5-inch fairing speakers Two 6×9-inch saddlebag speakers NAV-TV ZEN-H A2B radio integration Street Glide amplifier rack and complete wiring 6×9 saddlebag lid cut-in mounting system 24FLXCHX-4X4SG Complete System Overview This manufacturer-matched Cicada Audio package combines the amplifier, speakers, factory-radio interface, wiring and vehicle-specific mounting components needed for a four-channel Street Glide audio upgrade. Two CHX65.2 6.5-inch Pro Coaxial Horn speakers replace the front fairing speakers. Two CHX69.2 6×9-inch Pro Coaxial Horn speakers install in the factory saddlebag lids using the included 24CHDLID cut-in system. All four speakers are 2-ohm models. Each speaker connects to an individual channel of the FLX1400.4 amplifier, creating a 2-ohm nominal load on each of the amplifier’s four channels. Non-DSP Amplifier Configuration FLX1400.4 Standard Amplifier This package includes the standard FLX1400.4 four-channel power amplifier. The amplifier does not contain the integrated digital signal processor found in the FLX1400.4PRO. ZEN-H A2B Integration The included NAV-TV ZEN-H package extracts the factory A2B audio signal and connects it to the Cicada amplifier through a direct-connect harness. No built-in DSP: This 24FLXCHX package should not be confused with the 24FLXPCHX system. The “P” version uses the FLX1400.4PRO amplifier with built-in DSP. This package uses the standard FLX1400.4 amplifier without built-in DSP. Speaker Impedance and Amplifier Channel Load Front Fairing: 2Ω The system includes one pair of CHX65.2 6.5-inch Pro Coaxial Horn speakers. Each front speaker has a nominal impedance of 2 ohms. Rear Saddlebags: 2Ω The system includes one pair of CHX69.2 6×9-inch Pro Coaxial Horn speakers. Each rear speaker has a nominal impedance of 2 ohms. Amplifier Load: 2Ω × 4 One speaker is connected to each amplifier channel, presenting a 2-ohm nominal load to all four channels. Front Left Channel One CHX65.2 speaker — 2Ω Front Right Channel One CHX65.2 speaker — 2Ω Rear Left Channel One CHX69.2 speaker — 2Ω Rear Right Channel One CHX69.2 speaker — 2Ω Final Intended Load 2Ω per amplifier channel Speaker impedance: This package does not include selectable 4-ohm speaker versions. The supplied front and rear speakers are all 2-ohm models matched to the FLX1400.4 amplifier’s published 2-ohm stereo output. Everything Included in the Complete System FLX1400.4 — 1400W Four-Channel Amplifier One compact Class-D four-channel amplifier producing up to 350 watts RMS × 4 at 2 ohms and 14.4 volts. This is the standard non-DSP FLX1400.4 model. CHX65.2 — 6.5" Pro Coaxial Horn Speakers One pair of 2-ohm CHX65.2 speakers for the Street Glide fairing. Each speaker is rated for 300 watts RMS and includes an external 12dB crossover with optional tweeter attenuation. CHX69.2 — 6×9" Pro Coaxial Horn Speakers One pair of 2-ohm CHX69.2 speakers for the rear saddlebag lids. Each speaker is rated for 400 watts RMS and includes an external 12dB crossover with optional tweeter attenuation. 24CHDSGG — Street Glide Fairing Grilles One pair of Cicada Audio branded aluminum fairing grilles designed specifically for compatible 2024 and newer Street Glide models. 24CHDLID — 6×9" Saddlebag Lid Cut-In Kit A complete left-and-right saddlebag lid mounting system with angled top-load baffles, protective steel grilles, waterproof gasketing and cutout templates. HDPG4K — 4-AWG Amplifier Installation Kit A motorcycle-specific 4-AWG power and ground kit with terminated battery connections, amplifier-side ferrules, remote trigger wire and waterproof fuse holder. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface Kit The non-DSP NAV-TV ZEN-H A2B integration package with a Cicada Audio direct-connect harness and correctly pinned Molex connectors for the FLX1400.4 amplifier. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, short extensions and long speaker-wire leads for routing amplifier output to the saddlebag speakers. 24HDAR-SG — Street Glide Amplifier Rack Black-anodized aluminum amplifier rack designed for compatible 2024 and newer Street Glide OEM amplifier mounting locations. Predrilled FLX mounting points and hardware are included. FLX1400.4 Amplifier Power 350W × 4 at 2Ω At 14.4 volts, the amplifier produces up to 350 watts RMS on each of its four channels into the included 2-ohm speakers. 225W × 4 at 4Ω The amplifier also supports four-channel 4-ohm operation, although this complete system includes 2-ohm speakers. 700W × 2 Bridged at 4Ω The FLX1400.4 can support bridged operation with compatible 4-ohm loads, but the included complete system uses four-channel stereo operation. Wide Input Range A 0.2V–12V input sensitivity range supports integration with compatible factory-radio interfaces and aftermarket signal sources. Built-In Crossovers Selectable high-pass, full-range and low-pass modes provide 30Hz–300Hz crossover adjustment with a 12dB-per-octave slope. Compact FLX Chassis The compact aluminum chassis is designed for space-limited motorcycle amplifier locations and installs on the included rack. FLX1400.4 Amplifier Specifications Amplifier Model FLX1400.4 Amplifier Type Four-channel Class-D power amplifier without built-in DSP Output at 2Ω / 14.4V 350W RMS × 4 channels Output at 2Ω / 12.5V 300W RMS × 4 channels Output at 4Ω / 14.4V 225W RMS × 4 channels Output at 4Ω / 12.5V 200W RMS × 4 channels Bridged Output at 4Ω / 14.4V 700W RMS × 2 channels Frequency Response 20Hz–20kHz ±3dB Operating Voltage 8V–16V Input Sensitivity 0.2V–12V Turn-On Modes Remote or DC offset Crossover Modes LPF / FULL / HPF Crossover Range 30Hz–300Hz Crossover Slope 12dB per octave Overall Dimensions 7.9 × 4.9 × 2.0 inches Built-In DSP No CHX65.2 Front Fairing Speakers Model CHX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch Pro Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 300W RMS / 600W maximum per speaker Mid-Bass Voice Coil 2 inches / 51mm Tweeter Voice Coil 1.4 inches / 35.56mm Cone Carbon Matrix Composite™ Tweeter Dome Aluminum Sensitivity 92dB Frequency Response 70Hz–20kHz ±4dB Mounting Depth 2.64 inches / 67mm External Crossover 12dB with optional -3dB / -6dB tweeter attenuation CHX69.2 Rear Saddlebag Speakers Model CHX69.2 Quantity Two speakers / one pair Speaker Type 6×9-inch Pro Coaxial Horn Nominal Impedance 2Ω per speaker Power Handling 400W RMS / 800W maximum per speaker Mid-Bass Voice Coil 2.5 inches / 64mm Tweeter Voice Coil 1.75 inches / 44mm Cone Carbon Matrix Composite™ Tweeter Dome Aluminum Sensitivity 92dB, 1W / 1M Frequency Response 46Hz–20kHz ±3dB Mounting Depth 3.75 inches / 96mm External Crossover 12dB with optional -3dB / -6dB tweeter attenuation 24CHDLID Saddlebag Lid System The included 24CHDLID is a complete cut-in system designed to turn compatible factory saddlebag lids into reinforced, rider-focused 6×9-inch speaker locations. Left and right angled top-load speaker baffles Heavy-duty powder-coated steel speaker grilles Waterproof gasketed clamping rings High-strength, UV-resistant molded components ABS saddlebag lid cutout templates Heavy-duty replacement lid gasket seals Rainproof lid covers Cicada lid tethers with crossover-storage pouches Die-cut speaker gasketing Permanent lid modification required: Both factory saddlebag lids must be cut using the templates supplied with the 24CHDLID mounting system. Plug-and-Play A2B Integration The included NAV-TV ZEN-H interface extracts the factory digital A2B audio signal. The Cicada direct-connect harness then routes that signal into the FLX1400.4 amplifier through correctly pinned locking connectors. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Direct connection to compatible Cicada Audio amplifiers OEM-grade positive-locking connectors Compact routing inside the Street Glide fairing Non-DSP amplifier integration configuration Plug-and-Play Versus Cut-In Installation Direct-Fit Components The A2B interface harness, amplifier input connections, rear-output harness and amplifier rack use vehicle-specific connections and mounting points to reduce custom wiring and fabrication. Cut-In Components The rear CHX69.2 speaker installation requires permanent cutting of the factory saddlebag lids using the templates and baffles supplied with the 24CHDLID system. Installation clarification: This is a complete, vehicle-specific integration system, but it is not a completely no-modification installation because the rear saddlebag lid speakers require permanent lid cutting. Complete System Specifications Complete System SKU 24FLXCHX-4X4SG Vehicle Application Compatible 2024 and newer Harley-Davidson Street Glide Amplifier FLX1400.4 four-channel amplifier without built-in DSP Amplifier Output 350W RMS × 4 at 2Ω and 14.4 volts Total Speaker Count Four Pro Coaxial Horn speakers Front Speakers Two CHX65.2 6.5-inch speakers Rear Speakers Two CHX69.2 6×9-inch speakers Speaker Impedance All four speakers are 2Ω Intended Channel Load 2Ω per amplifier channel Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada direct-connect harness Built-In DSP No Front Grilles 24CHDSGG Street Glide fairing grilles Rear Lid System 24CHDLID 6×9-inch cut-in mounting kit Power Wiring HDPG4K 4-AWG amplifier installation kit Rear Speaker Wiring 24HDRO plug-and-play rear-output harness Amplifier Rack 24HDAR-SG Street Glide amplifier mounting rack Shopify Variants None Electrical and Installation Requirements High-current audio system: The motorcycle battery, charging system, power wiring, main fuse and ground path must support the complete amplifier system. Follow the current Cicada installation documentation when selecting the final fuse value. Use the included HDPG4K 4-AWG power and ground installation kit. Install the correct main fuse near the battery connection. Use clean, secure and properly prepared power and ground connections. Confirm that the motorcycle battery is in good operating condition. Evaluate charging-system capacity before extended high-output use. Protect all wiring from heat, sharp edges and moving components. Secure the amplifier and wiring against motorcycle vibration. Set amplifier gains and crossovers for the included speakers. Professional installation and system setup are strongly recommended. Fitment and Ordering Notes Verify fitment: Confirm the exact Street Glide year, trim, factory radio, factory amplifier configuration, saddlebag style and electrical system before ordering. Designed for compatible 2024 and newer Street Glide motorcycles. The system includes four 2-ohm speakers. The system does not include selectable 4-ohm speaker variants. The amplifier uses one speaker on each of its four channels. The FLX1400.4 amplifier does not include built-in DSP. The A2B interface supports direct factory-radio signal integration. The rear-output harness routes amplifier output to the saddlebags. The factory saddlebag lids require permanent cutting. Amplifier gain and crossover setup are required. Professional installation is strongly recommended. Best For 2024+ Street Glide riders wanting a complete Cicada Audio system Four-speaker front-and-rear motorcycle audio upgrades Factory A2B radio systems requiring aftermarket integration High-output 2-ohm Pro Coaxial Horn speaker systems Riders adding 6×9-inch speakers to factory saddlebag lids Systems using a standard four-channel amplifier without built-in DSP Professional Street Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Systems Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Amplifiers and Integration Motorcycle Amplifiers Motorcycle Amplifier Installation Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCHX-4X4SG FAQ What ohm speakers come with this system? All four included speakers are 2-ohm models. The front pair is CHX65.2, and the rear saddlebag pair is CHX69.2. What load does the amplifier see? Each amplifier channel powers one 2-ohm speaker. The intended system configuration therefore presents a 2-ohm nominal load to each of the amplifier’s four channels. How much power does the amplifier produce? The FLX1400.4 produces up to 350 watts RMS × 4 channels at 2 ohms and 14.4 volts. Does this system include a DSP amplifier? No. This package includes the standard FLX1400.4 amplifier without built-in DSP. The 24FLXPCHX version uses the FLX1400.4PRO amplifier with integrated DSP. How many speakers are included? Four speakers are included: two CHX65.2 6.5-inch fairing speakers and two CHX69.2 6×9-inch saddlebag speakers. Does the system integrate with the factory A2B radio? Yes. It includes a NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are the Street Glide fairing grilles included? Yes. The system includes a pair of 24CHDSGG Cicada-branded Street Glide fairing grilles. Does the system include rear-speaker wiring? Yes. The 24HDRO plug-and-play rear-output harness is included for routing amplifier output to the saddlebag speakers. Does the system include an amplifier rack? Yes. The package includes the 24HDAR-SG black-anodized aluminum Street Glide amplifier rack and mounting hardware. Do the factory saddlebag lids need to be cut? Yes. The included 24CHDLID is a cut-in 6×9-inch mounting system. Installation permanently modifies both factory saddlebag lids. Is this completely plug-and-play? The A2B interface, amplifier signal connections, rear-output harness and amplifier rack are vehicle-specific. The rear speaker installation still requires permanent cutting of the factory saddlebag lids. Does the system require tuning? The amplifier gains, high-pass filters and external speaker crossovers must be configured correctly. Because this amplifier does not include DSP, advanced equalization and time alignment require a separate compatible processor. Need Help Confirming Your Street Glide System? Call Garage Bagger Stereo with your Street Glide year, trim, factory audio package and current electrical setup. We’ll help confirm fitment and make sure the complete Cicada system is installed, wired and configured correctly for your motorcycle. Call 864-334-6131 Ask GBS for Help -
Cicada Audio 24FLXCXX-4X2RG 500W 2-Speaker System for 2024+ Road Glide
Vendor:Cicada AudioCOMPLETE 2024+ ROAD GLIDE FRONT AUDIO SYSTEM Cicada Audio 24FLXCXX-4X2RG 500W 2-Speaker Audio System The Cicada Audio 24FLXCXX-4X2RG is a complete front-fairing audio package for compatible 2024 and newer Harley-Davidson Road Glide motorcycles. It combines a compact four-channel amplifier, two high-efficiency 2-ohm Pro Coaxial speakers, factory A2B radio integration and Road Glide-specific installation components. The supplied system uses two amplifier channels for the front speaker pair. Two additional channels and the included rear-output harness remain available for a properly matched future rear-speaker upgrade. See Everything Included View Speaker Load Front Audio with Rear Expansion Support Designed for compatible 2024+ Road Glide motorcycles FLX500.4 compact four-channel Class-D amplifier 125 watts RMS × 4 channels at 2Ω Two CXX65.2 6.5-inch Pro Coaxial speakers Both included speakers are 2Ω Road Glide fairing grilles included NAV-TV ZEN-H A2B factory-radio integration Road Glide amplifier rack included 8-AWG amplifier power kit included Rear-output harness included for future expansion 24FLXCXX-4X2RG Complete System Overview This Cicada Audio package upgrades the two factory Road Glide fairing speaker locations while installing the amplifier, power wiring, A2B interface and vehicle-specific mounting hardware needed for a complete front audio system. One pair of CXX65.2 6.5-inch Pro Coaxial speakers installs behind the included Cicada-branded Road Glide fairing grilles. Each speaker has a nominal impedance of 2 ohms and connects to its own amplifier channel. The FLX500.4 provides four amplified channels. The supplied system uses two channels for the front speakers, while the 24HDRO harness supports future expansion to compatible rear speakers. Standard Non-DSP System Configuration FLX500.4 Power Amplifier This package uses the standard FLX500.4 four-channel Class-D amplifier. It delivers compact, efficient power but does not contain an integrated digital signal processor. NAV-TV ZEN-H A2B Integration The included interface kit converts the compatible factory A2B audio signal and connects it to the Cicada amplifier through purpose-built locking harness connections. No built-in DSP: The FLX500.4 does not provide digital equalization, time alignment or DSP limiting. Those functions require a separately purchased compatible processor when the system design calls for advanced tuning. Speaker Impedance and Amplifier Channel Load Front Left: 2Ω One CXX65.2 speaker connects to the assigned left-front amplifier channel and presents a nominal 2-ohm load. Front Right: 2Ω The second CXX65.2 speaker connects to the assigned right-front amplifier channel and presents a nominal 2-ohm load. Rear Channels: Available No rear speakers are included. The remaining two amplifier channels can power a properly matched future rear-speaker system. Included Speaker Count Two speakers / one pair Included Speaker Model CXX65.2 Speaker Impedance 2Ω per speaker Supplied Configuration One 2Ω speaker on each of two amplifier channels Remaining Amplifier Channels Two channels available for compatible rear-speaker expansion Supplied system load: Only two amplifier channels are loaded by the included speakers. Each loaded channel operates at a nominal 2 ohms. Rear-speaker impedance must be matched correctly before connecting additional speakers. Everything Included in the Complete System FLX500.4 — Four-Channel Amplifier One compact Class-D amplifier rated for 125 watts RMS × 4 channels at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. CXX65.2 — 6.5" Pro Coaxial Speakers One pair of 2-ohm CXX65.2 speakers for the Road Glide fairing. Each speaker is rated for 100 watts RMS and uses a Kevlar cone, PEI dome tweeter and built-in 6dB crossover. 24CHDRGG — Road Glide Fairing Grilles One pair of Cicada Audio-branded powder-coated steel grilles designed for compatible 2024 and newer Harley-Davidson Road Glide fairings. 24HDAR-RG — Road Glide Amplifier Rack Black-anodized aluminum amplifier rack that uses compatible OEM mounting locations and includes predrilled FLX amplifier mounting points and installation hardware. HDPG8K — 8-AWG Amplifier Power Kit Includes six-foot power and ground cables, braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring and a waterproof Mini-ANL fuse holder. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect amplifier harness and correctly pinned locking Molex connections. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, short extensions and longer speaker-wire leads for future rear-speaker installation. Rear-speaker ready: The rear-output harness and two additional amplifier channels are included. Rear speakers, saddlebag speaker adapters, speaker lids and cut-in hardware are sold separately. FLX500.4 Amplifier Power 125W × 4 at 2Ω The amplifier produces up to 125 watts RMS on each of its four channels when operating at 2 ohms and 14.4 volts. 95W × 4 at 4Ω It also supports four-channel operation with compatible 4-ohm speakers when the system is designed around that channel load. 250W × 2 Bridged The published bridged configuration is 250 watts RMS × 2 into compatible 4-ohm loads. Wide Input Range The 0.2V–12V gain range supports compatible factory interfaces, aftermarket radios, processors and high-output preamplifiers. Flexible Crossovers Selectable LPF, FULL and HPF modes provide 20Hz–20kHz adjustment with selectable 6, 12, 24 or 48dB-per-octave slopes. Compact Motorcycle Chassis The compact aluminum chassis installs on the included Road Glide amplifier rack without consuming unnecessary fairing space. FLX500.4 Amplifier Specifications Amplifier Model FLX500.4 Amplifier Type Four-channel Class-D amplifier without built-in DSP Output at 4Ω 95W RMS × 4 channels at 14.4V Output at 2Ω 125W RMS × 4 channels at 14.4V Bridged Output at 4Ω 250W RMS × 2 channels at 14.4V Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Amplifier Fuse 50A according to current amplifier specifications Efficiency 80% Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 THD + Noise 0.1% at 2Ω per channel at 10% rated power Input Sensitivity 0.2V–12V Turn-On Modes REM / DC / VOX Crossover Modes LPF / FULL / HPF Crossover Range 20Hz–20,000Hz Crossover Slopes 6 / 12 / 24 / 48dB per octave Dimensions with Brackets 5.2 × 4.9 × 2.0 inches / 131 × 125 × 51mm Chassis Dimensions 4.0 × 4.9 × 2.0 inches / 104 × 125 × 51mm CXX65.2 Road Glide Fairing Speakers Speaker Model CXX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch high-performance Pro Coaxial speaker Nominal Impedance 2Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Mid-Bass Voice Coil 1.4 inches / 35mm Tweeter Voice Coil 1 inch / 25mm Cone Kevlar Tweeter Dome PEI Magnet N45H neodymium Built-In Crossover 6dB Sensitivity 93dB Frequency Response 55Hz–20kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Weather Protection Rain or Shine all-weather design with UV-protected surfaces Warranty Two-year manufacturer warranty Road Glide-Specific Hardware 24CHDRGG Fairing Grilles The included powder-coated steel grilles are shaped for compatible 2024 and newer Road Glide fairings and feature Cicada Audio-branded emblems. 24HDAR-RG Amplifier Rack The black-anodized aluminum rack uses compatible OEM amplifier mounting locations and includes predrilled holes for FLX-style amplifiers. Factory A2B Radio Integration The NAV-TV ZEN-H interface extracts the compatible factory digital A2B audio signal. The included Cicada harness routes that signal directly into the FLX500.4 through correctly pinned locking connections. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Positive-locking automotive-grade connections Direct integration with compatible Cicada Audio amplifiers Compact routing inside the Road Glide fairing Standard non-DSP system configuration Rear-Speaker-Ready System Design The FLX500.4 provides four amplifier channels, but the supplied package includes only two front fairing speakers. The included 24HDRO harness prepares the system for compatible rear speakers without replacing the original amplifier or rebuilding the factory-radio interface. Included for Expansion Two additional amplifier channels 24HDRO rear-output harness Factory-style harness connections Extended speaker-wire leads for rear routing Not Included Rear saddlebag speakers Saddlebag speaker adapters Cut-in speaker-lid hardware Rear speaker grilles or pods Expansion planning: Added rear speakers must be compatible with the FLX500.4 amplifier’s supported impedance, available output and crossover configuration. Power Wiring and Fuse Selection Included HDPG8K Power Kit The supplied kit includes six-foot 8-AWG power and ground cables, battery ring terminals, amplifier ferrules, remote trigger wiring and a waterproof Mini-ANL fuse holder. Amplifier Fuse Specification Cicada’s current FLX500.4 specification recommends a 50-amp fuse for the amplifier. Verify the fuse before installation: Cicada currently lists 60-, 80- and 100-amp fuses with the HDPG8K kit while the FLX500.4 page recommends 50 amps. Do not automatically install a larger supplied fuse. Confirm the correct fuse value and wire protection with current Cicada guidance. Complete System Specifications Complete System SKU 24FLXCXX-4X2RG Vehicle Application Compatible 2024 and newer Harley-Davidson Road Glide Amplifier FLX500.4 four-channel amplifier without built-in DSP Amplifier Output at 2Ω 125W RMS × 4 channels at 14.4V Included Speaker Count Two Pro Coaxial speakers Included Speakers Two CXX65.2 6.5-inch speakers Speaker Impedance 2Ω per included speaker Loaded Amplifier Channels Two channels at 2Ω each Rear Amplifier Channels Available for compatible future speakers Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada harness Built-In DSP No Front Grilles 24CHDRGG Road Glide fairing grilles Power Wiring HDPG8K 8-AWG power and ground installation kit Rear Output Wiring 24HDRO plug-and-play harness Amplifier Rack 24HDAR-RG Road Glide amplifier rack Rear Speakers Included No Saddlebag Mounting Kit Included No Shopify Variants None Fitment and Ordering Notes Verify fitment: Confirm the exact Road Glide year, trim, factory radio, factory amplifier configuration, fairing speaker locations and electrical system before ordering. Designed for compatible 2024 and newer Road Glide motorcycles. The package includes two 2-ohm front speakers. No selectable speaker-impedance variants are required. Two amplifier channels power the included front speaker pair. The remaining two channels are available for future expansion. The rear-output harness is included. Rear speakers and saddlebag mounting components are not included. No saddlebag cutting is required for the supplied front-only system. Future rear installation requirements depend on the selected mounting system. The amplifier does not include built-in DSP. Professional installation and system setup are recommended. Best For Compatible 2024+ Road Glide front-speaker upgrades Riders starting with a two-speaker amplified system Factory A2B radios requiring aftermarket amplifier integration Efficient 2-ohm Pro Coaxial motorcycle speakers Systems using a compact standard four-channel amplifier Riders planning to add compatible rear speakers later Professional Road Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCXX-4X2RG FAQ What impedance are the included speakers? Both included CXX65.2 speakers have a nominal impedance of 2 ohms. How many speakers are included? The system includes two 6.5-inch CXX65.2 Pro Coaxial speakers for the Road Glide fairing. What load does the amplifier see? Each included speaker connects to its own amplifier channel, so each loaded front channel operates at a nominal 2-ohm load. Are all four amplifier channels used? No. The supplied system uses two channels for the front speakers. The remaining two channels are available for a compatible rear-speaker upgrade. How much power does the amplifier produce? The FLX500.4 produces 125 watts RMS × 4 at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. How much power can the included speakers handle? Each CXX65.2 speaker is rated for 100 watts RMS and 200 watts maximum. Amplifier gain must be set correctly to protect the speakers. Does the amplifier include a DSP? No. The FLX500.4 is a standard four-channel amplifier without an integrated digital signal processor. Does the system integrate with the factory A2B radio? Yes. The package includes the NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are Road Glide fairing grilles included? Yes. The package includes the Cicada Audio 24CHDRGG powder-coated steel fairing grille pair. Is the amplifier rack included? Yes. The package includes the 24HDAR-RG Road Glide amplifier rack and its mounting hardware. Is rear-speaker wiring included? Yes. The 24HDRO rear-output harness is included for a future rear-speaker upgrade. Are rear speakers included? No. Rear speakers and their saddlebag mounting components must be purchased separately. Do the saddlebags need to be cut for this system? No saddlebag modification is required for the supplied front-only system. A future rear-speaker installation may require cutting or other modification depending on the selected mounting solution. What fuse should be used? Cicada’s current FLX500.4 specifications recommend a 50-amp fuse, but the included HDPG8K kit is listed with larger fuse values. Verify the correct final fuse with current Cicada guidance before installation. Need Help Planning Your Road Glide System? Garage Bagger Stereo can help verify Road Glide fitment, speaker impedance selection, amplifier matching, mounting clearance, power and speaker wiring, crossover setup and factory A2B signal integration before installation. Installation Services Request a Custom Build -
Cicada Audio 24FLXCXX-4X2SG 500W 2-Speaker System for 2024+ Street Glide
Vendor:Cicada AudioCOMPLETE 2024+ STREET GLIDE FRONT AUDIO SYSTEM Cicada Audio 24FLXCXX-4X2SG 500W 2-Speaker Audio System The Cicada Audio 24FLXCXX-4X2SG is a complete front-fairing audio package for compatible 2024 and newer Harley-Davidson Street Glide motorcycles. It combines a compact four-channel amplifier, two high-efficiency 2-ohm Pro Coaxial speakers, factory A2B radio integration, Street Glide-specific mounting hardware and a rear-output harness for future system expansion. See Everything Included View Speaker Load Front Audio with Rear Expansion Support Designed for compatible 2024+ Street Glide motorcycles FLX500.4 compact four-channel Class-D amplifier 125 watts RMS × 4 channels at 2Ω Two CXX65.2 6.5-inch Pro Coaxial speakers Both included speakers are 2Ω Street Glide fairing grilles included NAV-TV ZEN-H A2B factory-radio integration Street Glide amplifier rack included 8-AWG amplifier power kit included Rear-output harness included for future expansion 24FLXCXX-4X2SG Complete System Overview This Cicada Audio package upgrades the two factory Street Glide fairing speaker locations while installing the four-channel amplifier, power wiring, A2B interface and output wiring needed for a larger system. One pair of CXX65.2 6.5-inch Pro Coaxial speakers installs behind the included Cicada-branded Street Glide fairing grilles. Each speaker has a nominal impedance of 2 ohms and connects to its own amplifier channel. The FLX500.4 provides four amplified channels. The supplied configuration uses two channels for the front speaker pair, while the included 24HDRO harness prepares the other two channels for a separately purchased rear-speaker upgrade. Standard Non-DSP System Configuration FLX500.4 Power Amplifier This package uses the standard FLX500.4 four-channel amplifier. It delivers compact Class-D power but does not include an integrated digital signal processor. NAV-TV ZEN-H A2B Integration The included ZEN-H interface extracts the factory digital A2B audio signal and connects it directly to the Cicada amplifier through the included vehicle-specific harness. No built-in DSP: This package does not provide DSP equalization, time alignment or digital output limiting. Those functions require a separately purchased compatible digital signal processor. Speaker Impedance and Amplifier Channel Load Front Left: 2Ω One CXX65.2 speaker connects to the assigned left-front amplifier channel and presents a nominal 2-ohm load. Front Right: 2Ω The second CXX65.2 speaker connects to the assigned right-front amplifier channel and presents a nominal 2-ohm load. Rear Channels: Available No rear speakers are included. The remaining two amplifier channels can power a properly matched future rear-speaker system. Included Speaker Count Two speakers / one pair Included Speaker Model CXX65.2 Speaker Impedance 2Ω per speaker Supplied Configuration One 2Ω speaker on each of two amplifier channels Remaining Amplifier Channels Two channels available for compatible rear-speaker expansion Supplied system load: Only two amplifier channels are loaded by the included speakers. Each loaded channel operates at a nominal 2 ohms. Rear-speaker impedance must be matched correctly before connecting additional speakers. Everything Included in the Complete System FLX500.4 — Four-Channel Amplifier One compact Class-D amplifier rated for 125 watts RMS × 4 channels at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. CXX65.2 — 6.5" Pro Coaxial Speakers One pair of 2-ohm CXX65.2 speakers for the Street Glide fairing. Each speaker is rated for 100 watts RMS and uses a Kevlar cone, integrated PEI tweeter and built-in 6dB crossover. 24CHDSGG — Street Glide Fairing Grilles One pair of Cicada Audio-branded aluminum fairing grilles designed specifically for compatible 2024 and newer Street Glide motorcycles. 24HDAR-SG — Street Glide Amplifier Rack Black-anodized aluminum amplifier rack that uses compatible factory amplifier mounting locations and includes predrilled FLX mounting points and installation hardware. HDPG8K — 8-AWG Amplifier Power Kit Includes six-foot power and ground cables with black braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring, a waterproof Mini-ANL fuse holder and 60-, 80- and 100-amp fuses. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect amplifier harness and correctly pinned, positive-locking Molex connections. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, two short extensions and two longer speaker-wire leads for future rear-speaker installation. Rear-speaker ready: The rear-output harness and two additional amplifier channels are included. Rear speakers, speaker lids, saddlebag adapters and rear mounting hardware are sold separately. FLX500.4 Amplifier Power 125W × 4 at 2Ω The amplifier produces up to 125 watts RMS on each of its four channels when operating at 2 ohms and 14.4 volts. 95W × 4 at 4Ω The amplifier also supports four-channel operation with compatible 4-ohm speakers. 250W × 2 Bridged The published bridged configuration is 250 watts RMS × 2 into compatible 4-ohm loads. Wide Input Range The 0.2V–12V gain range supports compatible factory-radio interfaces, aftermarket radios and external signal processors. Flexible Crossovers Selectable LPF, FULL and HPF modes provide 20Hz–20kHz adjustment with selectable 6, 12, 24 or 48dB-per-octave slopes. Compact Motorcycle Chassis The small aluminum chassis installs on the included Street Glide amplifier rack without consuming unnecessary fairing space. FLX500.4 Amplifier Specifications Amplifier Model FLX500.4 Amplifier Type Four-channel Class-D amplifier without built-in DSP Output at 4Ω 95W RMS × 4 channels at 14.4V Output at 2Ω 125W RMS × 4 channels at 14.4V Bridged Output at 4Ω 250W RMS × 2 channels at 14.4V Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Fuse 50A Efficiency 80% Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Input Sensitivity 0.2V–12V Turn-On Modes REM / DC / VOX Crossover Modes LPF / FULL / HPF Crossover Range 20Hz–20,000Hz Crossover Slopes 6 / 12 / 24 / 48dB per octave Dimensions with Brackets 5.2 × 4.9 × 2.0 inches / 131 × 125 × 51mm Chassis Dimensions 4.0 × 4.9 × 2.0 inches / 104 × 125 × 51mm CXX65.2 Street Glide Fairing Speakers Speaker Model CXX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch high-performance Pro Coaxial speaker Nominal Impedance 2Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Mid-Bass Voice Coil 1.4 inches / 35mm Tweeter Voice Coil 1 inch / 25mm Cone Kevlar Tweeter Dome PEI Magnet Neodymium Built-In Crossover 6dB Sensitivity 93dB Frequency Response 55Hz–20kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Warranty Two-year manufacturer warranty Rear-Speaker-Ready System Design The FLX500.4 provides four amplifier channels, but the supplied system includes only the two front fairing speakers. Cicada includes the 24HDRO harness so a compatible rear-speaker pair can be added without replacing the amplifier or rebuilding the factory-radio interface. Included for Expansion Two additional amplifier channels 24HDRO rear-output harness Factory-style harness connections Long speaker-wire leads for saddlebag routing Not Included Rear saddlebag speakers Saddlebag speaker adapters Cut-in speaker-lid hardware Rear speaker grilles or pods Expansion planning: Added rear speakers must be compatible with the FLX500.4 amplifier’s supported impedance, available output and crossover configuration. Factory A2B Radio Integration The NAV-TV ZEN-H interface extracts the factory digital A2B audio signal. The included Cicada harness routes that signal directly into the FLX500.4 through correctly pinned Molex connections. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Positive-locking automotive-grade connections Direct integration with compatible Cicada Audio amplifiers Compact routing inside the Street Glide fairing Standard non-DSP system configuration Installation and System Setup Mount the amplifier securely on the included 24HDAR-SG rack. Use the included HDPG8K power and ground wiring kit. Use a correctly rated fuse installed near the battery connection. Use the included A2B interface and Cicada amplifier harness. Confirm speaker mounting depth and grille clearance before assembly. Set the amplifier high-pass filters for the CXX65.2 speakers. Set amplifier gain using clean measured output. Do not exceed the 100-watt RMS rating of the front speakers. Secure all wiring against vibration, heat and sharp edges. Professional installation and system setup are recommended. Complete System Specifications Complete System SKU 24FLXCXX-4X2SG Vehicle Application Compatible 2024 and newer Harley-Davidson Street Glide Amplifier FLX500.4 four-channel amplifier without built-in DSP Amplifier Output at 2Ω 125W RMS × 4 channels at 14.4V Included Speaker Count Two Pro Coaxial speakers Included Speakers Two CXX65.2 6.5-inch speakers Speaker Impedance 2Ω per included speaker Loaded Amplifier Channels Two channels at 2Ω each Rear Amplifier Channels Available for compatible future speakers Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada harness Built-In DSP No Front Grilles 24CHDSGG Street Glide fairing grilles Power Wiring HDPG8K 8-AWG power and ground installation kit Rear Output Wiring 24HDRO plug-and-play harness Amplifier Rack 24HDAR-SG Street Glide amplifier rack Rear Speakers Included No Saddlebag Mounting Kit Included No Shopify Variants None Fitment and Ordering Notes Verify fitment: Confirm the exact Street Glide year, trim, factory radio, factory amplifier configuration, fairing speaker locations and electrical system before ordering. Designed for compatible 2024 and newer Street Glide motorcycles. The package includes two 2-ohm front speakers. The package does not include selectable speaker impedance options. Two amplifier channels power the included front speaker pair. The remaining two channels are available for future expansion. The rear-output harness is included. Rear speakers and saddlebag mounting components are not included. No saddlebag cutting is required for the supplied front-only system. Future rear installation requirements depend on the selected mounting system. The amplifier does not include built-in DSP. Professional installation and system setup are recommended. Best For Compatible 2024+ Street Glide front-speaker upgrades Riders starting with a two-speaker amplified system Factory A2B radios requiring aftermarket amplifier integration Efficient 2-ohm Pro Coaxial motorcycle speakers Systems using a compact standard four-channel amplifier Riders planning to add compatible rear speakers later Professional Street Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCXX-4X2SG FAQ What impedance are the included speakers? Both included CXX65.2 speakers have a nominal impedance of 2 ohms. How many speakers are included? The system includes two 6.5-inch CXX65.2 Pro Coaxial speakers for the Street Glide fairing. What load does the amplifier see? Each included speaker connects to its own amplifier channel, so each loaded front channel operates at a nominal 2-ohm load. Are all four amplifier channels used? No. The supplied system uses two channels for the front speakers. The remaining two channels are available for a compatible rear-speaker upgrade. How much power does the amplifier produce? The FLX500.4 produces 125 watts RMS × 4 at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. How much power can the speakers handle? Each CXX65.2 speaker is rated for 100 watts RMS and 200 watts maximum. Amplifier gain must be set correctly to protect the speakers. Does the amplifier include a DSP? No. The FLX500.4 is a standard four-channel amplifier without an integrated digital signal processor. Does the system integrate with the factory A2B radio? Yes. The package includes a NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are Street Glide fairing grilles included? Yes. The package includes the Cicada Audio 24CHDSGG aluminum fairing grille pair. Is the amplifier rack included? Yes. The package includes the 24HDAR-SG Street Glide amplifier rack and its mounting hardware. Is rear-speaker wiring included? Yes. The 24HDRO rear-output harness is included for a future rear-speaker upgrade. Are rear speakers included? No. Rear speakers and the required saddlebag mounting components must be purchased separately. Do the saddlebags need to be cut for this system? No saddlebag modification is required for the supplied front-only system. A future rear-speaker installation may require cutting or other modification depending on the selected mounting solution. Need Help Planning Your Street Glide System? Submit your Street Glide year, trim, factory audio package and future rear-speaker plans so Garage Bagger Stereo can verify fitment, electrical requirements and the correct expansion components for your motorcycle. Installation Services Request a Custom Build
THE REFERENCE STANDARD FOR CLEAN POWER INTEGRATION
Plug-and-play is how you build it right the first time—clean signal, correct turn-on behavior, and platform-correct integration without hacks. This is the GBS standard for real output at highway speed.
- No factory wire cutting — no guessing
- Platform-correct harnessing and signal integration
- Compact, motorcycle-ready form factors for real installs
WHAT YOU’RE BUILDING
- Clean install with correct integration
- Real power without splicing
- Factory or aftermarket radio compatibility
- Highway-speed performance you can trust
Plug-and-play amplifiers are the fastest way to go from “stock” to “built right” — clean integration first, then power and tuning.
Why Choose Plug-and-Play Amplifiers for Your Motorcycle
Not all amplifiers are motorcycle-ready. Plug-and-play amplifiers eliminate installation headaches by using platform-correct harnessing, proper signal integration, and compact form factors designed for fairings and saddlebag locations.
- No factory wire cutting — keep the bike clean and serviceable.
- Faster, cleaner installs using bike-specific wiring and mounting solutions.
- Proper signal voltage and turn-on behavior for reliable system operation.
- Compatibility with factory and aftermarket radios when paired with the correct harnessing.
- Reliable performance at highway speed — clean power delivery you can hear.
Built for Harley Touring Platforms
These plug-and-play amplifiers are designed to work with Harley-Davidson touring motorcycles when paired with the correct harnessing and installation parts.
- 2014–2023 Harley touring models
- 2023.5+ CVO and 2024+ touring platforms
- Fairing-mounted amplifier installs
- Saddlebag and rear speaker systems
Always confirm platform year and radio configuration before ordering.
What’s Included in This Plug-and-Play Amplifier Collection
- Motorcycle-specific plug-and-play amplifiers
- Amplifiers designed for fairing and saddlebag installs
- Compatible options for factory and aftermarket radios
- Power solutions for front stage, rear speakers, and subwoofers
- Amplifiers ready for DSP integration
Build the System the Right Way
A plug-and-play amplifier is one part of a complete system. For best results, pair your amplifier with platform-correct speakers, DSP tuning, and installation hardware.
If you’re unsure which amplifier fits your bike or goals, Garage Bagger Stereo can help you select the correct configuration.
High-output systems start with clean integration. Build it once, build it right.
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.