-
SaleCicada Audio 14CXK65 Mid-Bass Component Speaker Kit (2Ω & 4Ω)
Vendor:Cicada AudioCicada Audio 14CXK65 6.5″ Mid-Bass Component Speaker Kit 2Ω & 4Ω FEATURES: Designed for 2014-2023 H-D® factory-designed locations Rain or Shine™ all-weather performance design OFC Copper shorting ring for extended high-frequency performance The Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high-temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor DiDie-castluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty SPECIFICATIONS: 4Ω – 6.5-inch mid-bass driver Power handling: 250W RMS/500W MAX Voice Coils: 2.0-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94dB, 1W / 1M response 70Hz – 20kHz +/- 3dB Mounting Depth: 2.64-inch/67mm Mounting Diameter: 5.67-inch/144mm 4Ω – 1.0-inch shallow ring radiator horn tweeter Power handling: 200W RMS/400W MAX Voice Coils: 1.0-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12dB-7kHz external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Magnet: Neodymium Sensitivity: 107dB, 1W / 1M response 2kHz – 20kHz +/- 3dB Mounting Depth: 0.75-inch/18mm Mounting Diameter: 2.0-inch/50mmSale -
SaleCicada Audio CXK69 - 6X9-inch Mid-Bass 2 Way Component Speaker Kit (2Ω or 4Ω)
Vendor:Cicada AudioCicada Audio CXK69 (2Ω or 4Ω) 6X9-inch Mid-Bass 2-Way Component Speaker Kit Fits 6x9 lids for 14-23 Does not fit 23.5-24 HD Lids MID-BASS FEATURES Rain or Shine™ all-weather performance design OFC Copper shorting ring for extended high-frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high-temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die-cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty MID_BASS SPECIFICATIONS 2Ω / 6X9-inch mid-bass driver 4Ω / 6X9-inch mid-bass driver Power Handling: 250W RMS / 500W MAX Voice Coil: 2-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 10 kHz +/- 3 dB Mounting Depth: 3.26-inch/83mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm TWEETER FEATURES Rain or Shine™ all-weather performance design The aluminum tweeter dome diaphragm delivers brighter sound and maximized efficiency OFC Copper wire voice coil offers great sound while generating less heat Custom tooled, vented, encased external crossover Field replaceable diaphragm Aluminum die-cast custom tooled backplate N35SH Neodymium magnet motor Two (2) year warranty TWEETER SPECIFICATIONS 4Ω / 1-inch shallow ring radiator horn tweeter Power Handling: 50W RMS / 100W MAX Voice Coil: 1-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12 dB @ 7 kHz Magnet: Neodymium Sensitivity: 101 dB, 1W / 1M Frequency Response: 2 kHz – 20 kHz +/- 3 dB Mounting Depth: 1.1-inch/28mm Mounting Diameter: 2-inch/50.8mmSale -
Harley Davidson Street Glide Components 23.5-current
Vendor:Cicada AudioCicada Audio 6.5" Mid-Bass 2-Way Component Speaker Kit Built for 23.5-current Street Glide Fairing Only Free shipping, use code ShipOne at checkout FEATURES: Designed for 2023.5+ factory-designed locations Brock Black Designs 3D printed and black painted grills Rain or Shine™ all-weather performance design speakers OFC Copper shorting ring for extended high-frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, robust, and high temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die-cast Aluminum custom-tooled basket with Vortex Flow Venting™ Two (2) year warranty on 6.5 and compression driversTen0 business day lead time Grills are painted black Some assembly is required (nuts and bolts) Designed for use with aftermarket amplifiers It will work with stock amplifiers; however internal pod wiring may need to be slightly modified SPECIFICATIONS: 2Ω – 6.5-inch mid-bass driver Power handling: 250W RMS/500W MAX Voice Coils: 2.0-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94dB, 1W / 1M response 70Hz – 20kHz +/- 3dB Mounting Depth: 2.64-inch/67mm Mounting Diameter: 5.67-inch/144mm 4Ω – 1.0-inch shallow ring radiator horn tweeter Power handling: 200W RMS/400W MAX Voice Coils: 1.0-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12dB-7kHz external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Magnet: Neodymium Sensitivity: 107dB, 1W / 1M response 2kHz – 20kHz +/- 3dB Mounting Depth: 0.75-inch/18mm Mounting Diameter: 2.0-inch/50mm -
2014–2023 Harley Touring Plug & Play Audio Bundle - 14CXK65 Component + Amp Choice
Vendor:Cicada Audio2014–2023 Harley Touring Plug & Play Audio Bundle built for riders who want loud, clear sound at highway speed with a clean install path. This bundle includes Cicada Audio 14CXK65 6.5" component speakers plus your choice of a plug and play 4-channel amplifier so you can match output to your riding style and budget. Shop All 2014–2023 Plug and Play Kits Amplifier Installation Parts Speaker Installation Parts Component speakers deliver stronger front-stage detail and clarity. Choose your amplifier option below based on how loud you want to ride and how much headroom you want at speed. What’s Included Cicada Audio 14CXK65 6.5" Component Speaker Kit (midbass + tweeters) Plug and Play 4-Channel Amplifier Option (choose one): Cicada FLX1400 or DS18 ION1600 Built for 2014–2023 Harley touring bikes with plug and play focused integration Why This Bundle Works on 2014–2023 Harley Touring Bikes This bundle is designed for riders who want real performance gains without a complicated build. The 14CXK65 component system improves front-stage detail and output by separating the tweeter from the midbass, and pairing it with a dedicated 4-channel amplifier gives you the clean power needed for loud, clear sound at highway speed. Plug and play amplifier options keep your installation clean and reduce guesswork so the system performs the way it should. Choose Your Plug and Play Amplifier Option Cicada Audio FLX1400 (Plug and Play Option) Best choice for riders who want maximum headroom and strong clarity. Great when you want more output potential and clean power for higher-volume riding. View Cicada Audio FLX1400 Amplifier DS18 ION1600 (Plug and Play Option) Compact efficiency with clean amplification and strong real-world output. A proven touring amp platform for loud, clear sound at speed. View DS18 ION1600 Amplifier Speaker Details The Cicada Audio 14CXK65 component kit is designed for riders who want more front-stage detail and stronger clarity than a coaxial upgrade. Component speakers separate the tweeter from the midbass, improving imaging and giving you a cleaner, more defined sound when amplified. View Cicada Audio 14CXK65 Component Speaker Kit Recommended Add-Ons for Best Results For the cleanest install and best performance, most builds pair this bundle with the correct install parts: Amplifier Installation Parts Speaker Installation Parts Product Links Included + Options Cicada Audio 14CXK65 Component Speaker Kit DS18 ION1600.4 Amplifier Cicada Audio FLX1400 Amplifier If you need help choosing the right amplifier option for your output goals and riding style, Garage Bagger Stereo can help you dial in the best setup. Fitment Designed for 2014–2023 Harley Davidson touring motorcycles. If you have questions about your exact model or factory audio configuration, Garage Bagger Stereo can help confirm the right configuration before you order. Shop the Bundle Select your amplifier option and upgrade your 2014–2023 Harley touring audio with a plug and play bundle designed for louder volume, cleaner sound, and a cleaner install. -
DS18 2014–2023 Harley Front Stage Audio Kit | Road Glide or Street Glide
Vendor:DS18 Motorcycle Audio2014–2023 HARLEY-DAVIDSON FRONT-STAGE AUDIO DS18 Harley-Davidson Front Stage Speaker and Bullet Tweeter Kit Build a stronger front soundstage on a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide with a matched pair of DS18 slim 6.5-inch midrange speakers and fairing-specific replacement grilles preloaded with NVY neodymium bullet tweeters. Each kit combines powerful midrange projection, dedicated high-frequency output, inline tweeter crossovers and a clean OEM-style grille installation. Select the Road Glide or Street Glide version that matches the motorcycle’s fairing. Choose Fairing Style See What Is Included Complete Front-Stage Upgrade Road Glide and Street Glide versions available Designed for compatible 2014–2023 Harley Touring fairings Two PRO-CF6.4SLN slim 6.5-inch midrange speakers 150 watts RMS per midrange speaker 4-ohm nominal impedance per midrange Water-resistant carbon-fiber cones Neodymium midrange motor structure Two 2.5-inch NVY bullet tweeters Inline tweeter crossovers included Direct-fit replacement fairing grilles DS18 Harley Front Stage Kit Overview This DS18 package replaces the factory front speaker locations with higher-output midrange drivers while adding dedicated bullet tweeters directly to the replacement fairing grilles. The PRO-CF6.4SLN speakers are shallow 6.5-inch midrange drivers designed for space-limited motorcycle installations. Their carbon-fiber cones, neodymium motors and 93dB sensitivity help deliver strong vocals, guitars and upper midrange frequencies through wind, road and exhaust noise. The NVY grille assemblies place one bullet tweeter on each side of the fairing. Inline crossovers filter lower frequencies before they reach the tweeters, while the fairing-specific grille design maintains a clean factory-style appearance. Road Glide and Street Glide Variants 2014–2023 Road Glide Includes the PRO-CF6.4SLN midrange speaker pair and the NVY-HDGRGTW.1423LD Road Glide grille and bullet tweeter package. The grilles are shaped for compatible sharknose fairing speaker locations. Package SKU: PRO-CF6.4SLN.2pk + NVY-HDGRGTW.1423LD Road Glide-specific replacement grille pair 102dB published tweeter sensitivity 2014–2023 Street Glide Includes the PRO-CF6.4SLN midrange speaker pair and the NVY-HDGSGTW.1423LD Street Glide grille and bullet tweeter package. The grilles are shaped for compatible batwing fairing speaker locations. Package SKU: PRO-CF6.4SLN.2pk + NVY-HDGSGTW.1423LD Street Glide-specific replacement grille pair 105dB published tweeter sensitivity Select the correct variant: Road Glide and Street Glide fairings use different grille shapes and mounting systems. Confirm the exact motorcycle year, model and fairing before ordering. Speaker Impedance and Amplifier Planning Midrange Impedance Each PRO-CF6.4SLN midrange speaker has a nominal impedance of 4 ohms. Tweeter Impedance Each grille-mounted NVY bullet tweeter has a nominal impedance of 4 ohms and must be used with its crossover filtering. Final Channel Load The final amplifier load depends on how the midrange and crossover network are connected. Verify the complete wiring configuration before selecting or configuring an amplifier. Do not assume a constant 2-ohm load: A 4-ohm midrange and a 4-ohm tweeter connected through a frequency-selective crossover do not behave like two unfiltered full-range resistive loads. Confirm amplifier stability with the final wiring and crossover arrangement. Everything Included in the Front Stage Kit Two PRO-CF6.4SLN Midrange Speakers One matched pair of slim-profile 6.5-inch midrange loudspeakers rated at 150 watts RMS and 300 watts maximum per speaker. Fairing-Specific Replacement Grilles One left-and-right Road Glide or Street Glide replacement grille pair, depending on the selected Shopify variant. Two NVY Bullet Tweeters Each replacement grille is preloaded with one 2.5-inch neodymium bullet tweeter for dedicated high-frequency output. Two Inline Crossovers The included crossover modules filter damaging lower frequencies before they reach the bullet tweeters. Package contents: This listing includes the front midrange speaker pair, selected fairing grille pair, two preinstalled bullet tweeters and inline crossover filtering. An amplifier, DSP, amplifier wiring and unrelated rear speakers are not included. Why Riders Choose This DS18 Front Stage Highway-Ready Midrange The midrange speakers emphasize the vocal and instrument frequencies that must overcome wind, engine and road noise. Dedicated High Frequencies Grille-mounted bullet tweeters improve the projection of vocals, cymbals and upper-frequency detail. Slim Speaker Design The shallow PRO-CF6.4SLN frame is engineered for compact motorcycle fairing installations where mounting depth is limited. Carbon-Fiber Cones Water-resistant carbon-fiber cones provide a rigid, lightweight diaphragm for clear and controlled midrange output. Neodymium Motors Lightweight neodymium motor structures reduce unnecessary weight while supporting efficient speaker output. OEM-Style Appearance The tweeters are integrated into vehicle-specific replacement grilles rather than mounted in unrelated external pods. PRO-CF6.4SLN Midrange Specifications Midrange Model PRO-CF6.4SLN Quantity Two speakers / one pair Nominal Size 6.5 inches / 165mm Speaker Type Slim-profile midrange loudspeaker Nominal Impedance 4Ω per speaker RMS Power Handling 150 watts per speaker Maximum Power Handling 300 watts per speaker Sensitivity 93dB, 1W / 1M Frequency Response 100Hz–6kHz Cone Material Water-resistant carbon fiber Magnet Material Neodymium Mounting Profile Slim / shallow motorcycle installation design NVY Bullet Tweeter and Grille Specifications Road Glide Grille Model NVY-HDGRGTW.1423LD Street Glide Grille Model NVY-HDGSGTW.1423LD Grille Quantity Two / matched left-and-right pair Tweeter Quantity Two / one preinstalled in each grille Tweeter Size 2.5 inches / 65mm Nominal Impedance 4Ω per tweeter Package Peak Power Rating 200 watts per tweeter pair Road Glide Tweeter Sensitivity 102dB Street Glide Tweeter Sensitivity 105dB Frequency Response 2kHz–20kHz Recommended High-Pass 4kHz Crossover Protection Inline crossover modules included Magnet Material Neodymium Weather Protection IP65-rated tweeter construction Grille Protection UV-resistant construction with waterproof cloth backing Installation Style Fairing-specific direct-fit replacement grille Midrange and Tweeter System Design Midrange Frequency Coverage The PRO-CF6.4SLN speakers reproduce the vocal, guitar and upper midrange frequencies that provide most of the system’s perceived clarity and projection. High-Frequency Coverage The bullet tweeters extend the front stage into the upper frequencies while the inline crossovers protect them from lower frequency energy. This is not a full-range bass system: The PRO-CF6.4SLN is a dedicated midrange speaker. System design should use appropriate high-pass filtering and, where stronger bass is required, separate mid-bass or subwoofer drivers. Amplifier and Crossover Setup Use an amplifier that is stable with the final connected channel load. Match amplifier output to the 150-watt RMS rating of each midrange speaker. Use the supplied inline crossover modules with the bullet tweeters. Do not send unfiltered bass or midrange energy directly to the tweeters. Use appropriate high-pass filtering on the PRO-CF6.4SLN midranges. Set amplifier gain with clean measured output rather than by volume position alone. Verify speaker and tweeter polarity on both sides of the fairing. Secure the crossovers and wiring against vibration and fairing-panel contact. Confirm that all wiring is protected from heat, sharp edges and moving components. Professional installation and system tuning are recommended. Complete Kit Specifications Brand DS18 Product Type Harley-Davidson front-stage component speaker kit Vehicle Applications Compatible 2014–2023 Road Glide or Street Glide Shopify Option Fairing Style Road Glide SKU PRO-CF6.4SLN.2pk + NVY-HDGRGTW.1423LD Street Glide SKU PRO-CF6.4SLN.2pk + NVY-HDGSGTW.1423LD Midrange Speakers Two PRO-CF6.4SLN 6.5-inch slim midranges Midrange Impedance 4Ω per speaker Midrange Power 150W RMS / 300W maximum per speaker Midrange Sensitivity 93dB Midrange Frequency Response 100Hz–6kHz Tweeters Two 2.5-inch NVY neodymium bullet tweeters Tweeter Impedance 4Ω per tweeter Tweeter Sensitivity 102dB Road Glide / 105dB Street Glide Tweeter Crossovers Two inline crossover modules included Grilles One fairing-specific left-and-right replacement pair Weather Protection Water-resistant carbon-fiber cones and IP65-rated tweeters Amplifier Included No Fitment and Ordering Notes Verify the complete installation: Confirm the motorcycle year, exact model, fairing type, current front speaker enclosure, available mounting depth, amplifier configuration and wiring before ordering. Select the Road Glide or Street Glide variant before adding to cart. The replacement grilles are not interchangeable between fairing styles. The kit is intended for compatible 2014–2023 Touring fairings. Each included midrange speaker has a nominal impedance of 4 ohms. Each included bullet tweeter has a nominal impedance of 4 ohms. Inline tweeter crossovers are included and must remain in the signal path. Confirm midrange mounting depth and enclosure clearance before assembly. Confirm crossover placement before snapping or bolting the grilles into place. An amplifier and amplifier wiring are not included. Professional installation and tuning are recommended. Best For 2014–2023 Road Glide front-stage audio upgrades 2014–2023 Street Glide front-stage audio upgrades Riders who need stronger vocal projection at highway speeds Systems requiring separate midrange and high-frequency drivers Fairing installations with limited speaker mounting depth Harley audio systems using an aftermarket amplifier or DSP Installations that need a clean factory-style grille appearance Related Motorcycle Audio Categories Motorcycle Speaker Upgrades Shop Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Parts Signal and System Support Motorcycle DSP and Signal Integration 2023.5+ / 2024+ Harley Plug-and-Play Kits Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries DS18 Harley Front Stage Kit FAQ What comes with this DS18 Harley front-stage kit? The kit includes two PRO-CF6.4SLN slim 6.5-inch midrange speakers, one pair of fairing-specific replacement grilles, two preinstalled NVY bullet tweeters and two inline tweeter crossover modules. Does this listing cover both Road Glide and Street Glide? Yes. Choose the Road Glide or Street Glide variant. Each option uses a different grille assembly matched to its specific fairing. What impedance are the midrange speakers? Each PRO-CF6.4SLN midrange speaker has a nominal impedance of 4 ohms. What impedance are the bullet tweeters? Each grille-mounted bullet tweeter has a nominal impedance of 4 ohms. Does the complete system create a 2-ohm load? Do not assume a constant 2-ohm load. The tweeter uses a frequency-selective crossover, so the final impedance varies with frequency and depends on the actual wiring arrangement. How much power can the midrange speakers handle? Each midrange speaker is rated for 150 watts RMS and 300 watts maximum. What is the difference between the Road Glide and Street Glide tweeters? The grille shapes are different. DS18 also publishes 102dB tweeter sensitivity for the Road Glide package and 105dB for the Street Glide package. Are the tweeter crossovers included? Yes. Inline crossover modules are supplied with the grille and tweeter assemblies. Can the tweeters be connected without the crossovers? No. The tweeters require crossover or high-pass protection to prevent damaging lower frequencies from reaching the high-frequency drivers. Are these full-range speakers? The PRO-CF6.4SLN is a dedicated midrange loudspeaker. The grille-mounted tweeters supply the upper frequencies. Additional mid-bass or subwoofers may be needed for stronger low-frequency output. Is an amplifier included? No. This package contains the speakers, tweeter grilles and crossover modules. The amplifier, DSP and amplifier wiring are sold separately. Are the components weather resistant? The midranges use water-resistant carbon-fiber cones. The tweeters are IP65 rated, and the grille assemblies use UV-resistant construction with protective cloth backing. Need Help Matching This DS18 Front Stage? Garage Bagger Stereo can help verify Road Glide or Street Glide fitment, speaker impedance, amplifier matching, mounting clearance, crossover wiring and factory or aftermarket signal integration before the system is installed. Installation Services Request a Custom Build
-
Sale
Cicada Audio 14CXK65 Mid-Bass Component Speaker Kit (2Ω & 4Ω)
Vendor:Cicada AudioCicada Audio 14CXK65 6.5″ Mid-Bass Component Speaker Kit 2Ω & 4Ω FEATURES: Designed for 2014-2023 H-D® factory-designed locations Rain or Shine™ all-weather performance design OFC Copper shorting ring for extended high-frequency performance The Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high-temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor DiDie-castluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty SPECIFICATIONS: 4Ω – 6.5-inch mid-bass driver Power handling: 250W RMS/500W MAX Voice Coils: 2.0-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94dB, 1W / 1M response 70Hz – 20kHz +/- 3dB Mounting Depth: 2.64-inch/67mm Mounting Diameter: 5.67-inch/144mm 4Ω – 1.0-inch shallow ring radiator horn tweeter Power handling: 200W RMS/400W MAX Voice Coils: 1.0-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12dB-7kHz external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Magnet: Neodymium Sensitivity: 107dB, 1W / 1M response 2kHz – 20kHz +/- 3dB Mounting Depth: 0.75-inch/18mm Mounting Diameter: 2.0-inch/50mmSale -
Sale
Cicada Audio CXK69 - 6X9-inch Mid-Bass 2 Way Component Speaker Kit (2Ω or 4Ω)
Vendor:Cicada AudioCicada Audio CXK69 (2Ω or 4Ω) 6X9-inch Mid-Bass 2-Way Component Speaker Kit Fits 6x9 lids for 14-23 Does not fit 23.5-24 HD Lids MID-BASS FEATURES Rain or Shine™ all-weather performance design OFC Copper shorting ring for extended high-frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, strong, high-temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die-cast Aluminum custom tooled basket with Vortex Flow Venting™ Two (2) year warranty MID_BASS SPECIFICATIONS 2Ω / 6X9-inch mid-bass driver 4Ω / 6X9-inch mid-bass driver Power Handling: 250W RMS / 500W MAX Voice Coil: 2-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94 dB, 1W / 1M Frequency Response: 70 Hz – 10 kHz +/- 3 dB Mounting Depth: 3.26-inch/83mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm TWEETER FEATURES Rain or Shine™ all-weather performance design The aluminum tweeter dome diaphragm delivers brighter sound and maximized efficiency OFC Copper wire voice coil offers great sound while generating less heat Custom tooled, vented, encased external crossover Field replaceable diaphragm Aluminum die-cast custom tooled backplate N35SH Neodymium magnet motor Two (2) year warranty TWEETER SPECIFICATIONS 4Ω / 1-inch shallow ring radiator horn tweeter Power Handling: 50W RMS / 100W MAX Voice Coil: 1-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12 dB @ 7 kHz Magnet: Neodymium Sensitivity: 101 dB, 1W / 1M Frequency Response: 2 kHz – 20 kHz +/- 3 dB Mounting Depth: 1.1-inch/28mm Mounting Diameter: 2-inch/50.8mmSale -
Harley Davidson Street Glide Components 23.5-current
Vendor:Cicada AudioCicada Audio 6.5" Mid-Bass 2-Way Component Speaker Kit Built for 23.5-current Street Glide Fairing Only Free shipping, use code ShipOne at checkout FEATURES: Designed for 2023.5+ factory-designed locations Brock Black Designs 3D printed and black painted grills Rain or Shine™ all-weather performance design speakers OFC Copper shorting ring for extended high-frequency performance Carbon Matrix Composite™ (CMC™) cone is lightweight, robust, and high temperature resistant, and exceptionally efficient OFC Copper wire voice coil with Black Coat™ ensures high conductivity, low resistance, and extreme thermal performance N35SH Neodymium magnet motor Die-cast Aluminum custom-tooled basket with Vortex Flow Venting™ Two (2) year warranty on 6.5 and compression driversTen0 business day lead time Grills are painted black Some assembly is required (nuts and bolts) Designed for use with aftermarket amplifiers It will work with stock amplifiers; however internal pod wiring may need to be slightly modified SPECIFICATIONS: 2Ω – 6.5-inch mid-bass driver Power handling: 250W RMS/500W MAX Voice Coils: 2.0-inch/51mm mid-bass Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 94dB, 1W / 1M response 70Hz – 20kHz +/- 3dB Mounting Depth: 2.64-inch/67mm Mounting Diameter: 5.67-inch/144mm 4Ω – 1.0-inch shallow ring radiator horn tweeter Power handling: 200W RMS/400W MAX Voice Coils: 1.0-inch/25mm tweeter Tweeter Dome: Aluminum Crossover: 12dB-7kHz external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Magnet: Neodymium Sensitivity: 107dB, 1W / 1M response 2kHz – 20kHz +/- 3dB Mounting Depth: 0.75-inch/18mm Mounting Diameter: 2.0-inch/50mm -
2014–2023 Harley Touring Plug & Play Audio Bundle - 14CXK65 Component + Amp Choice
Vendor:Cicada Audio2014–2023 Harley Touring Plug & Play Audio Bundle built for riders who want loud, clear sound at highway speed with a clean install path. This bundle includes Cicada Audio 14CXK65 6.5" component speakers plus your choice of a plug and play 4-channel amplifier so you can match output to your riding style and budget. Shop All 2014–2023 Plug and Play Kits Amplifier Installation Parts Speaker Installation Parts Component speakers deliver stronger front-stage detail and clarity. Choose your amplifier option below based on how loud you want to ride and how much headroom you want at speed. What’s Included Cicada Audio 14CXK65 6.5" Component Speaker Kit (midbass + tweeters) Plug and Play 4-Channel Amplifier Option (choose one): Cicada FLX1400 or DS18 ION1600 Built for 2014–2023 Harley touring bikes with plug and play focused integration Why This Bundle Works on 2014–2023 Harley Touring Bikes This bundle is designed for riders who want real performance gains without a complicated build. The 14CXK65 component system improves front-stage detail and output by separating the tweeter from the midbass, and pairing it with a dedicated 4-channel amplifier gives you the clean power needed for loud, clear sound at highway speed. Plug and play amplifier options keep your installation clean and reduce guesswork so the system performs the way it should. Choose Your Plug and Play Amplifier Option Cicada Audio FLX1400 (Plug and Play Option) Best choice for riders who want maximum headroom and strong clarity. Great when you want more output potential and clean power for higher-volume riding. View Cicada Audio FLX1400 Amplifier DS18 ION1600 (Plug and Play Option) Compact efficiency with clean amplification and strong real-world output. A proven touring amp platform for loud, clear sound at speed. View DS18 ION1600 Amplifier Speaker Details The Cicada Audio 14CXK65 component kit is designed for riders who want more front-stage detail and stronger clarity than a coaxial upgrade. Component speakers separate the tweeter from the midbass, improving imaging and giving you a cleaner, more defined sound when amplified. View Cicada Audio 14CXK65 Component Speaker Kit Recommended Add-Ons for Best Results For the cleanest install and best performance, most builds pair this bundle with the correct install parts: Amplifier Installation Parts Speaker Installation Parts Product Links Included + Options Cicada Audio 14CXK65 Component Speaker Kit DS18 ION1600.4 Amplifier Cicada Audio FLX1400 Amplifier If you need help choosing the right amplifier option for your output goals and riding style, Garage Bagger Stereo can help you dial in the best setup. Fitment Designed for 2014–2023 Harley Davidson touring motorcycles. If you have questions about your exact model or factory audio configuration, Garage Bagger Stereo can help confirm the right configuration before you order. Shop the Bundle Select your amplifier option and upgrade your 2014–2023 Harley touring audio with a plug and play bundle designed for louder volume, cleaner sound, and a cleaner install.