-
SaleCerwin-Vega 23.5+ Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 23.5+ 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Wiring harness included Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment 23.5-Current Street Glide and Road Glide, including CVO ST Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 2023.5 and Newer Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley. Compatibility with Harley Davidson Motorcycles This cut-in lid kit is compatible with a variety of Harley Davidson models, including: Street Glide Road Glide The fitment range extends from 2023.5 to the current model year, ensuring you can enjoy enhanced audio regardless of your bike's vintage.Sale -
SaleCerwin-Vega 98-13 Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 98-13 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Plug-and-play wiring harness Recommended For Extra Protection FSWPG69 Water Repelling Grill Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment Harley Davidson® 1998-2013 models Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 1998-2013 Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley.Sale -
SaleCerwin-Vega CMHR2 - 98+ HD 2 Channel Amplifier Installation Kit
Vendor:Cerwin-VegaCerwin-Vega CMHR2 Harley Davidson 1998-current 2-Channel Amplifier Installation Kit Product Details Pre-cut, Loomed Power/Ground Wire & Speaker Wire Harnesses Direct-Fit Wiring with Ferrule Connectors and Fused Power Terminals Direct-fit OEM-Compatible Harness Connectors Designed for Street, Electra, and Road Guide Motorcycles 8-Gauge Oxygen-Free Copper Power and Ground Cables 16-Gauge Speaker Wiring 60-Amp MAXI fuse protection Specifications 8 Gauge OFC Power and Ground Battery Connections Waterproof fuse holder includes a 60A mini ANL fuse and Allen key for service. Heavy-duty power quick disconnects Quality twisted OFC RCAs with quick disconnects included All cable runs are blacked out, loomed, & terminated Stainless steel chrome plated wire inlets for both saddlebags included Comprehensive terminal kit with speaker terminal & amplifier power connections Zip ties Amplifier remote turn-on integrated into quick disconnect harness No special tools needed for installation History of Innovation Since 1954, Cerwin-Vega has stood at the forefront of the audio industry, delivering audio equipment with high-quality materials that have been verified and tested to ensure the best sounding and most reliable product on the market. These products represent the culmination of decades of acoustic research and technological advancement, utilizing the latest advances in acoustic technology in sound reproduction for your vehicle. This 2-channel version of their Harley Davidson-specific audio wiring kit is for speakers in bags only with 2 channels of signal RCA. Designed exclusively for saddlebag speaker configurations, this specialized kit features two dedicated channels of RCA signal connectivity, optimized for the unique requirements of motorcycle audio systems. Whether you're boosting your audio performance for highway cruising or upgrading your bike’s stereo for richer, clearer sound, this innovative Cerwin-Vega 2-channel amp installation kit provides the perfect foundation for a hassle-free setup. Key Features Complete Wiring Kit: Includes high-quality power, ground, and speaker wiring for a smooth and professional installation.Optimized for Harley-Davidson Models (1998-2023): Precision-engineered to integrate with your bike’s electrical system.Heavy-Duty Components: Specifically built to handle the demands of motorcycle audio systems while maintaining reliability.Simple Plug-and-Play Design: Fit for quick and easy installation and reduces the need for modifications.Supports 2-Channel Amplifiers: Designed for use with Cerwin-Vega and other compatible motorcycle amplifiers.Sale -
SaleCerwin-Vega CMHR4 - 98+ HD 4 Channel Amplifier Installation Kit
Vendor:Cerwin-VegaCerwin-Vega CMHR4 Harley Davidson 1998-current 4-Channel Amplifier Installation Kit Product Details Pre-cut, Loomed Power/Ground Wire & Speaker Wire Harnesses Direct Fit Wiring with Ferrule Connectors and Fused Power Terminals Includes Direct-fit OEM-Compatible Harness Connectors Compatible with Street, Electra, and Road Glide models Premium 8-Gauge Oxygen-Free Copper Power/Ground Wiring 16-Gauge Speaker Wiring 60-Amp MAXI fuse protection Specifications 8 Gauge OFC Power and Ground Battery Connections Waterproof fuse holder with 60A mini ANL fuse and Allen key Heavy-duty power quick disconnects Quality twisted OFC RCAs with quick disconnects included All cable runs are blacked out, loomed, & terminated Stainless steel chrome plated wire inlets for both saddlebags Speaker terminal assortment, amplifier power & speaker terminal forks Zip ties Amplifier remote turn-on integrated into quick disconnect harness No special tools are needed for installation 70 Years of Audio Excellence Established in 1954, Cerwin-Vega continues its legacy of high-performance audio solutions. Each product undergoes rigorous testing and quality assurance to deliver superior sound reproduction and reliability for your motorcycle. These audio solutions use the latest technology to offer professional-grade sound quality and reliability, every time you ride. This specialized 4-channel amp installation kit is engineered for saddlebag speaker setups on Harley Davidson motorcycles, featuring four channels of RCA signal connectivity. This purpose-built system is meant to meet the specific needs of these motorcycles for a top-tier audio experience. Whether you're enhancing your sound quality for highway cruising or seeking premium audio performance for your rides, this Cerwin-Vega installation kit provides the foundation for a seamless, professional-grade audio upgrade. Key Features Complete Wiring Kit: Includes high-quality power, ground, and speaker wiring for a clean and professional installation.Optimized for Harley-Davidson Models (1998-2023): Precision-engineered for seamless compatibility with your bike’s electrical system.Heavy-Duty Components: Built to handle the specific demands of motorcycle audio systems while maintaining reliability.Streamlined Design: Makes amplifier installation faster and easier, reducing the need for modifications.Supports 4-Channel Amplifiers: Compatible with Cerwin-Vega and other motorcycle amplifiers.Sale -
SaleCerwin-Vega PH694 6x9" Pro Full-Range Coaxial Horn Speakers
Vendor:Cerwin-VegaCerwin-Vega 6x9" Pro Full-Range Coax Horn Speakers PH694 The Cerwin-Vega PH694 6x9" Pro Series horn-loaded coaxial speakers deliver powerful output, sharp high-frequency projection, and strong midbass for motorcycles and high-SPL mobile audio systems. Featuring a treated paper cone, compression horn tweeter, and rugged steel basket, the PH694 provides clear, high-efficiency sound that cuts through road and wind noise while maintaining durability under heavy use. Specifications: Speaker Type: 2-Way Full-Range Coaxial Horn SpeakerSize: 6" x 9"Power Handling (RMS): 160 wattsPower Handling (Peak): 320 wattsImpedance: 4 ohm (Single Voice Coil)Sensitivity: 101 dB (High-efficiency SPL output)Frequency Response: 80 Hz – 18,000 HzMidrange Cone Material: Treated paperTweeter Type: Horn-loaded compression driverTweeter Diaphragm: PolyimideSurround Material: Treated clothFrame/Basket: Stamped steelMagnet Type: Ferrite (Ceramic)Crossover: Internal passive networkBi-Amp Capable: YesMounting Depth: 3.9 in (approx.)Cutout Dimensions: 8.74 in x 5.98 inRecommended Use Cases:– Motorcycle audio– Powersports / side-by-side– High-SPL car audio– Outdoor/open-air vehicles– Demo builds and competition systemsSale -
SaleCerwin-Vega SM69F4 RPM Stroker Marine 6x9" 2-Way Speakers
Vendor:Cerwin-VegaCerwin-Vega RPM Stroker Marine 6x9" 2- Way Speakers SM69F4 Built on a cast aluminum basket with IPX5 water resistance, UV-stable waterproof composite cone, and integrated RGB LED lighting, they are engineered for harsh marine and powersports environments while maintaining clean highs, strong midbass, and long-term durability. Key Specifications: Speaker size: 6x9 in Speaker type: 2-way coaxial Impedance: 4 ohm (single voice coil) Cone material: polypropylene Diaphragm material: titanium Basket material: cast aluminium Magnet type: ferrite (ceramic) Surround material: treated cloth Crossover: internal Water resistance: IPX5 Frequency response: 80Hz–20kHz Voice coil diameter: 1.5 in (38mm) Sensitivity (1W/1m): 93dB Xmax: 4mm Power handling (RMS): 150W Power handling (MAX): 300W Mounting diameter: 8.64 x 6 in (219.5 x 152.5mm).Sale -
SaleCerwin-Vega ST69CX Stroker 6x9" 2-Way Coax Speakers
Vendor:Cerwin-VegaCerwin-Vega Stroker 6x9" 2-Way Coax Speakers (2Ω or 4Ω) ST69CX Featuring a polypropylene cone, titanium dome tweeter, cast aluminum basket, and IPX5-rated construction, this 4-ohm component-style coax set delivers deep midbass, crisp highs, and high SPL performance, making it ideal for aggressive builds, show vehicles, and serious daily drivers. Key Specifications Speaker size: 6x9 in Speaker type: component/coax set Bi-ampable: yes Impedance: 4 ohm (single voice coil) Cone material: polypropylene Diaphragm material: titanium Basket material: cast aluminium Magnet type: woofer ferrite / tweeter neodymium Surround material: Santoprene Crossover: internal Water resistance: IPX5 Frequency response: 45Hz–20kHz Voice coil diameter: 1.5 in (38mm) Sensitivity (1W/1m): 90.5dB Vas: 4.5L Xmax: 39mm (1.6 in) Power handling (RMS): 125W Power handling (MAX): 500W Mounting depth: 4.25 in (107.9mm) Mounting diameter: 8.8 x 9.5 in (225.5 x 241.3mm).Sale -
SaleCerwin‑Vega 2014-2023 Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin Vega Harley 6x9 Multi Speaker Lid Kits The Cerwin Vega Harley 6x9 Lid Kits – Multi Speaker configuration is designed for riders building high-output rear audio systems on Harley Davidson touring motorcycles. These saddlebag lid kits provide the structural support and internal geometry required to mount multiple 6x9 speakers per lid while maintaining proper fitment and durability. Shop Harley Speaker Lids Shop Motorcycle Amplifiers Shop Motorcycle DSP Processors THE REFERENCE STANDARD Build It Right the First Time Not sure what fits your exact year and saddlebag setup? Start with a clean, correct plan. Start a Build Consultation Call 864-334-6131 Key Specifications Fitment 2014–2023 Harley Davidson® touring saddlebags Kit Type Cut In Saddlebag Lid Kit Speaker Configuration Multi 6x9 Speaker Layout Speaker Model ST692CX2 (2Ω or 4Ω) Power Handling 125W RMS – 250W RMS Included Components 2 lid kit grills w/Cerwin-Vega logo, 2 pre-cut templates (right & left), 2 - .5" speaker ring spacer, speaker wire harness Specs summarized from manufacturer technical data. Always verify fitment, impedance, and wiring before installation. Built for High-Output Rear Audio Systems Unlike single-speaker lid solutions, multi-speaker lid kits allow increased cone area and improved rear sound pressure when paired with adequate amplification. This makes them ideal for full front-and-rear systems where rear output must keep pace with high-powered fairing speakers. These lid kits are engineered specifically for Harley touring saddlebags and are designed to integrate cleanly with aftermarket amplifiers and DSP-controlled systems. Reinforced mounting zones minimize flex, while proper speaker spacing ensures consistent output and long-term reliability. Key Features Multi-speaker 6x9 configuration per saddlebag lid Harley touring-specific fitment Reinforced construction for high-output applications Designed for use with dedicated rear-channel amplification Amplification and Tuning Requirements Proper amplification and tuning are required to realize the full performance of multi-speaker lid systems. These kits are best paired with 4-channel or multi-channel amplifiers and DSP processors to manage level control, crossover points, and system balance. This product is intended for serious bagger audio builds where rear speaker performance is not an afterthought, but an integrated part of the overall system design. Build Links Motorcycle Amplifiers Motorcycle DSP Processors Motorcycle Speaker Installation Parts Harley Speaker LidsSale -
Cerwin‑Vega Waterproof Speaker Grills w/ Adhesive Application - (Pair)
Vendor:Cerwin-VegaCerwin‑Vega Waterproof Grills with Adhesive Application — Pair Protect your speakers with rugged, weather‑resistant grills designed for quick, clean installs using the included adhesive backing. Choose the size that matches your speakers for a factory‑grade look and dependable protection. Highlights Waterproof, UV‑resistant construction Self‑adhesive application — no drilling in most installs Sizes: 6.5″ / 6×9″ / 8″ Sold in pairs Prep the mounting surface for best adhesion. Verify clearance with grills installed.
-
Sale
Cerwin-Vega 23.5+ Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 23.5+ 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Wiring harness included Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment 23.5-Current Street Glide and Road Glide, including CVO ST Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 2023.5 and Newer Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley. Compatibility with Harley Davidson Motorcycles This cut-in lid kit is compatible with a variety of Harley Davidson models, including: Street Glide Road Glide The fitment range extends from 2023.5 to the current model year, ensuring you can enjoy enhanced audio regardless of your bike's vintage.Sale -
Sale
Cerwin-Vega 98-13 Harley Davidson 6x9 Cut-In Lid Kit w/Speakers
Vendor:Cerwin-VegaCerwin-Vega 98-13 6x9 Cut-In Lid Kit w/Speakers Cerwin-Vega Harley Davidson Motorcycle Audio Cut-in Kit for Quick Install - Easily add 6x9" speakers to your lids without the need for paint The supplied template makes cutting lids much more accurate and accessible than current offerings. Includes adaptors with grills, cutting templates, plug-and-play wiring harness, and all required hardware to complete the installation A pair of Cerwin-Vega 6x9" Speakers Plug-and-play wiring harness Recommended For Extra Protection FSWPG69 Water Repelling Grill Choices in Speakers include: ST69CX - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (4Ω) 2-Way 6X9” High Output Marine Coaxial Speakers Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 4Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” 1-year Manufacturer's Warranty Water Resistant Freq Response 45-23kHz Spec Sheet ST692CX2 - Stroker 6X9” 2-Way Coax Woofer W/Titanium Dome Tweeter (2Ω) 6X9” 2-Way High Output Coax-sub Speaker Power Handling: RMS Power Rating: 125 W RMS Peak Power Rating: 250 W RMS Nominal Impedance: 2Ω Sensitivity: 93.5 dB 1W / 1M Mounting Depth: 3.875” Cut-Out Diameter: 8.875” X 6.125” Overall Diameter: 9.5” X 7.25” Overall Height: 4.25” Water Resistant Freq Response 45-23kHz Spec Sheet PH694 - 6x9" 2-Way Pro Full-Range Coax Horn Speakers (4Ω) 6"x9" Full-range Speakers Power Handling: Peak: 320 watts each RMS: 160 watts each Horn Tweeters 1.5” double layer high temp voice coil High sensitivity 101db 1w/1m 12db 2nd order filter crossover Ferrite magnet motor structure Impedance: 4 ohms Frequency Response: 80 - 18000 Hz Grilles not included 1-year Manufacturer's Warranty Spec Sheet SM69F4 6x9 Marine 2 Way speaker Impedance: 4Ω Frequency Response: 60Hz-18Khz Voice Coil Diameter: 1.75" (44.7mm) Power: 150W RMS/300W MAX Fs(Hz): 70Hz Qts: 0.616 Vas Ft³/(L): 0.106 (3.0) Sensitivity (1W/1M): 93dB Sensitivity (2.83V/1M): 96dB Xmax: 0.16: (4mm) Mounting Depth: 3.15" (80mm) Cut-out Diameter: 8.64"x6.0" (219.5mm x 152.5mm) Fitment Harley Davidson® 1998-2013 models Elevate Your Ride with Superior Audio Quality Transform your motorcycle experience with our Cerwin Vega Cut-In Lid Kit, designed specifically for Harley Davidson motorcycles. This kit offers superior sound quality and an immersive audio experience that elevates your ride. Whether you're cruising down the highway or navigating city streets, the clarity and depth of our speaker system will provide the perfect soundtrack to your adventures. Hassle-Free Installation for 1998-2013 Models Say goodbye to complicated setups! Our hassle-free installation process features a plug-and-play wire harness, making it incredibly easy to upgrade your audio without needing professional help. Designed exclusively for OEM saddlebag lids, the lid kit fits seamlessly into your existing setup, ensuring a factory-finish appearance that complements your Harley.Sale -
Sale
Cerwin-Vega CMHR2 - 98+ HD 2 Channel Amplifier Installation Kit
Vendor:Cerwin-VegaCerwin-Vega CMHR2 Harley Davidson 1998-current 2-Channel Amplifier Installation Kit Product Details Pre-cut, Loomed Power/Ground Wire & Speaker Wire Harnesses Direct-Fit Wiring with Ferrule Connectors and Fused Power Terminals Direct-fit OEM-Compatible Harness Connectors Designed for Street, Electra, and Road Guide Motorcycles 8-Gauge Oxygen-Free Copper Power and Ground Cables 16-Gauge Speaker Wiring 60-Amp MAXI fuse protection Specifications 8 Gauge OFC Power and Ground Battery Connections Waterproof fuse holder includes a 60A mini ANL fuse and Allen key for service. Heavy-duty power quick disconnects Quality twisted OFC RCAs with quick disconnects included All cable runs are blacked out, loomed, & terminated Stainless steel chrome plated wire inlets for both saddlebags included Comprehensive terminal kit with speaker terminal & amplifier power connections Zip ties Amplifier remote turn-on integrated into quick disconnect harness No special tools needed for installation History of Innovation Since 1954, Cerwin-Vega has stood at the forefront of the audio industry, delivering audio equipment with high-quality materials that have been verified and tested to ensure the best sounding and most reliable product on the market. These products represent the culmination of decades of acoustic research and technological advancement, utilizing the latest advances in acoustic technology in sound reproduction for your vehicle. This 2-channel version of their Harley Davidson-specific audio wiring kit is for speakers in bags only with 2 channels of signal RCA. Designed exclusively for saddlebag speaker configurations, this specialized kit features two dedicated channels of RCA signal connectivity, optimized for the unique requirements of motorcycle audio systems. Whether you're boosting your audio performance for highway cruising or upgrading your bike’s stereo for richer, clearer sound, this innovative Cerwin-Vega 2-channel amp installation kit provides the perfect foundation for a hassle-free setup. Key Features Complete Wiring Kit: Includes high-quality power, ground, and speaker wiring for a smooth and professional installation.Optimized for Harley-Davidson Models (1998-2023): Precision-engineered to integrate with your bike’s electrical system.Heavy-Duty Components: Specifically built to handle the demands of motorcycle audio systems while maintaining reliability.Simple Plug-and-Play Design: Fit for quick and easy installation and reduces the need for modifications.Supports 2-Channel Amplifiers: Designed for use with Cerwin-Vega and other compatible motorcycle amplifiers.Sale -
Sale
Cerwin-Vega CMHR4 - 98+ HD 4 Channel Amplifier Installation Kit
Vendor:Cerwin-VegaCerwin-Vega CMHR4 Harley Davidson 1998-current 4-Channel Amplifier Installation Kit Product Details Pre-cut, Loomed Power/Ground Wire & Speaker Wire Harnesses Direct Fit Wiring with Ferrule Connectors and Fused Power Terminals Includes Direct-fit OEM-Compatible Harness Connectors Compatible with Street, Electra, and Road Glide models Premium 8-Gauge Oxygen-Free Copper Power/Ground Wiring 16-Gauge Speaker Wiring 60-Amp MAXI fuse protection Specifications 8 Gauge OFC Power and Ground Battery Connections Waterproof fuse holder with 60A mini ANL fuse and Allen key Heavy-duty power quick disconnects Quality twisted OFC RCAs with quick disconnects included All cable runs are blacked out, loomed, & terminated Stainless steel chrome plated wire inlets for both saddlebags Speaker terminal assortment, amplifier power & speaker terminal forks Zip ties Amplifier remote turn-on integrated into quick disconnect harness No special tools are needed for installation 70 Years of Audio Excellence Established in 1954, Cerwin-Vega continues its legacy of high-performance audio solutions. Each product undergoes rigorous testing and quality assurance to deliver superior sound reproduction and reliability for your motorcycle. These audio solutions use the latest technology to offer professional-grade sound quality and reliability, every time you ride. This specialized 4-channel amp installation kit is engineered for saddlebag speaker setups on Harley Davidson motorcycles, featuring four channels of RCA signal connectivity. This purpose-built system is meant to meet the specific needs of these motorcycles for a top-tier audio experience. Whether you're enhancing your sound quality for highway cruising or seeking premium audio performance for your rides, this Cerwin-Vega installation kit provides the foundation for a seamless, professional-grade audio upgrade. Key Features Complete Wiring Kit: Includes high-quality power, ground, and speaker wiring for a clean and professional installation.Optimized for Harley-Davidson Models (1998-2023): Precision-engineered for seamless compatibility with your bike’s electrical system.Heavy-Duty Components: Built to handle the specific demands of motorcycle audio systems while maintaining reliability.Streamlined Design: Makes amplifier installation faster and easier, reducing the need for modifications.Supports 4-Channel Amplifiers: Compatible with Cerwin-Vega and other motorcycle amplifiers.Sale
THE REFERENCE STANDARD FOR CLEAN POWER INTEGRATION
Plug-and-play is how you build it right the first time—clean signal, correct turn-on behavior, and platform-correct integration without hacks. This is the GBS standard for real output at highway speed.
- No factory wire cutting — no guessing
- Platform-correct harnessing and signal integration
- Compact, motorcycle-ready form factors for real installs
WHAT YOU’RE BUILDING
- Clean install with correct integration
- Real power without splicing
- Factory or aftermarket radio compatibility
- Highway-speed performance you can trust
Plug-and-play amplifiers are the fastest way to go from “stock” to “built right” — clean integration first, then power and tuning.
Why Choose Plug-and-Play Amplifiers for Your Motorcycle
Not all amplifiers are motorcycle-ready. Plug-and-play amplifiers eliminate installation headaches by using platform-correct harnessing, proper signal integration, and compact form factors designed for fairings and saddlebag locations.
- No factory wire cutting — keep the bike clean and serviceable.
- Faster, cleaner installs using bike-specific wiring and mounting solutions.
- Proper signal voltage and turn-on behavior for reliable system operation.
- Compatibility with factory and aftermarket radios when paired with the correct harnessing.
- Reliable performance at highway speed — clean power delivery you can hear.
Built for Harley Touring Platforms
These plug-and-play amplifiers are designed to work with Harley-Davidson touring motorcycles when paired with the correct harnessing and installation parts.
- 2014–2023 Harley touring models
- 2023.5+ CVO and 2024+ touring platforms
- Fairing-mounted amplifier installs
- Saddlebag and rear speaker systems
Always confirm platform year and radio configuration before ordering.
What’s Included in This Plug-and-Play Amplifier Collection
- Motorcycle-specific plug-and-play amplifiers
- Amplifiers designed for fairing and saddlebag installs
- Compatible options for factory and aftermarket radios
- Power solutions for front stage, rear speakers, and subwoofers
- Amplifiers ready for DSP integration
Build the System the Right Way
A plug-and-play amplifier is one part of a complete system. For best results, pair your amplifier with platform-correct speakers, DSP tuning, and installation hardware.
If you’re unsure which amplifier fits your bike or goals, Garage Bagger Stereo can help you select the correct configuration.
High-output systems start with clean integration. Build it once, build it right.
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.Â
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.