Browse Collections
-
Diamond Audio NEO15006DSP — 1500W RMS 6-Channel Amplifier w/ DSP
Vendor:Diamond AudioProduct Overview Video Diamond Audio NEO15006DSP 1500W RMS 6-Channel Amplifier with 8CH DSP The Diamond Audio NEO15006DSP combines six channels of compact Class D amplification with an integrated 8-channel digital signal processor for serious motorcycle, powersports, marine, and custom audio systems. It delivers 1500 watts RMS total while giving installers precise control over EQ, crossovers, time alignment, channel configuration, OEM integration, and system expansion. With 150 watts x 6 at 4 ohms, 250 watts x 6 at 2 ohms, or up to 500 watts x 3 bridged at 4 ohms, the NEO15006DSP can power complex multi-speaker layouts from a single compact amplifier while retaining the tuning flexibility required for high-output motorcycle audio. View NEO15006DSP Diamond Audio Amplifiers Motorcycle Amplifiers THE REFERENCE STANDARD Six Channels of Power. Eight Channels of DSP Control. Built for complex motorcycle audio systems that need high-output amplification, advanced system tuning, OEM integration, Bluetooth streaming, and flexible signal expansion from one compact chassis. Start a Build Consultation Call 864-334-6131 Diamond Audio NEO15006DSP Key Specifications Model NEO15006DSP Amplifier Type Class D 6-Channel Amplifier with Integrated 8-Channel DSP Total Rated Output 1500W RMS Power @ 4Ω 150W RMS x 6 Power @ 2Ω 250W RMS x 6 Bridged @ 4Ω 500W RMS x 3 DSP Architecture 8 channels total: 6 amplified channels + 2 RCA preamp outputs Parametric EQ 31 bands per DSP channel DSP Controls Parametric EQ, crossovers, time delay, channel linking, gain and system configuration Programming PC and Android programming support Bluetooth Built-in Bluetooth audio streaming Signal Input Range 0.4V – 20V high/low-level input Selectable Load Resistors 10Ω, 20Ω, 60Ω and 20kΩ Operating Voltage Range 8V – 17V RCA Preamp Outputs 2 channels Frequency Response 15Hz – 23kHz Signal-to-Noise Ratio 85dB THD & Noise ≤0.03% Dimensions 11.32″ x 4.07″ x 1.38″ Net Weight 2.78 lbs Remote Compatibility Diamond Audio NeoDRC1 Remote Commander — sold separately Construction Marine-ready, water-resistant chassis Fitment warning: At 11.32 inches long, this amplifier may require an oversized amplifier rack or alternate mounting location on some motorcycles. Verify placement, clearance, wiring path, ventilation, and system layout before ordering. 1500W RMS Across Six Amplified Channels The NEO15006DSP is designed for systems that need more channel count without stacking multiple amplifiers. Six full-range amplified channels allow one chassis to power fairing speakers, lower pods, saddlebag speakers, tour-pack speakers, active component layouts, or other multi-speaker configurations. 150W x 6 @ 4Ω Six independently amplified channels provide rated power for efficient multi-speaker systems and active configurations. 250W x 6 @ 2Ω Lower-impedance capability provides additional output for compatible high-performance motorcycle and powersports speakers. 500W x 3 Bridged @ 4Ω Channel pairs can be bridged for applications requiring substantially higher output from fewer channels. Integrated 8-Channel DSP The NEO15006DSP combines its six amplified channels with two additional RCA preamp outputs, creating an 8-channel DSP platform. That allows the amplifier to control its own powered channels while also feeding additional external amplification when the system grows beyond six channels. 31-Band Parametric EQ Per Channel Detailed channel-by-channel equalization gives the installer precise control over frequency response and system voicing. Crossovers and Time Delay Configure frequency ranges and channel timing for fairing speakers, pods, saddlebag speakers, tweeters, midbass drivers, and other system components. Channel Linking Linked-channel controls help simplify tuning when multiple speakers or amplifier channels require matching adjustments. PC and Android Programming Professional DSP programming support gives installers access to the amplifier's detailed tuning and configuration controls. OEM Audio System Integration The NEO15006DSP includes integration tools for vehicles and motorcycles where the factory source unit or amplifier may not provide a conventional low-level RCA signal. High- and low-level signal input capability from 0.4V up to 20V. Selectable onboard 10Ω, 20Ω, 60Ω, and 20kΩ load resistors. 8V to 17V operating-voltage compatibility. DSP-based signal management for complex aftermarket system layouts. Two RCA preamp outputs for additional amplifier expansion. System design still matters: High-level input capability and onboard load resistors do not automatically make every OEM motorcycle audio system plug-and-play. Verify the factory radio, amplifier, signal type, required interface, and integration strategy before installation. Bluetooth Audio Streaming Built In Diamond Audio includes Bluetooth audio streaming directly in the NEO15006DSP. This allows compatible Bluetooth devices to stream audio directly to the amplifier and DSP without requiring the signal to originate from a conventional head unit input. Diamond Audio also lists smartphone control capability through its NEO platform, with its dedicated companion-app functionality continuing to develop separately from the core amplifier and DSP hardware. Designed for Motorcycle, Marine, Powersports and Custom Audio The NEO15006DSP uses a marine-ready, water-resistant chassis designed for demanding installations. Its compact height, staggered RCA layout, quick-connect power block, and integrated DSP reduce the number of separate components required in a complex system. Water-Resistant Chassis Designed for motorcycle, powersports, marine, and other installations where moisture and environmental exposure must be considered. Staggered RCA Connections Connection placement helps simplify signal wiring and cable management in compact installations. Quick-Connect Power Block High-current removable power connections support cleaner service and installation access. Third-Party Measured Output In addition to Diamond Audio's published RMS ratings, the existing Garage Bagger Stereo listing includes independent measured output results from Vegas Hardbags. Vegas Hardbags Measured @ 4Ω 202W x 6 Vegas Hardbags Measured @ 2Ω 404W x 6 These are third-party measured results and are not Diamond Audio's published continuous RMS specifications. Actual measured output can vary with voltage, test method, load, gain structure, and operating conditions. Installation and System Planning Verify available amplifier-rack and fairing space before ordering. Confirm speaker impedance and RMS power requirements for every channel. Determine whether each channel will operate independently or in a bridged configuration. Verify the motorcycle's source-unit and factory-amplifier signal configuration. Confirm whether high-level inputs, load resistors, RCA inputs, or an external integration interface will be used. Plan the two DSP-controlled RCA outputs if additional amplification will be added. Verify electrical-system capacity for the complete amplifier and speaker package. Use proper fused power wiring, grounding, routing, and weather-resistant connections. Complete final DSP tuning only after the entire audio system is installed and operating correctly. Need Help Designing the System? The NEO15006DSP can simplify a complex system, but six amplified channels and eight channels of DSP also create a large number of possible configurations. Garage Bagger Stereo can help determine speaker loading, bridging, signal integration, electrical requirements, amplifier placement, and DSP strategy before you purchase. Start a Build Consultation Call 864-334-6131 -
SaleDiamond Audio NEO10001DSP — 1000W RMS Monoblock Amplifier w/ DSP
Vendor:Diamond AudioProduct Overview Video Diamond Audio NEO10001DSP 1000W RMS Monoblock Amplifier with 4CH DSP The Diamond Audio NEO10001DSP combines dedicated monoblock power with an integrated 4-channel digital signal processor in a compact Class D chassis. Designed for subwoofer, midbass, and low-frequency applications, it delivers up to 1000 watts RMS at 1 ohm while providing precise control over EQ, crossovers, time delay, OEM integration, and system expansion. With 600 watts RMS at 4 ohms, 800 watts RMS at 2 ohms, and 1000 watts RMS at 1 ohm, the NEO10001DSP gives motorcycle, powersports, marine, and custom-audio systems strong low-frequency output without requiring a separate standalone DSP. View NEO10001DSP Diamond Audio Amplifiers Motorcycle Amplifiers THE REFERENCE STANDARD Monoblock Power with Integrated DSP Control Built for motorcycle and powersports systems that need strong low-frequency output, advanced tuning, OEM signal integration, and flexible system expansion from one compact amplifier. Start a Build Consultation Call 864-334-6131 Diamond Audio NEO10001DSP Key Specifications Model NEO10001DSP Amplifier Type Class D 1-Channel Monoblock Amplifier with Integrated 4-Channel DSP Power @ 4Ω 600W RMS x 1 Power @ 2Ω 800W RMS x 1 Power @ 1Ω 1000W RMS x 1 DSP Architecture 4 channels total: 2 internal DSP channels + 2 RCA preamp outputs Parametric EQ 31 bands per DSP channel DSP Controls Parametric EQ, crossovers, time delay, channel linking, gain and system configuration Programming PC and Android programming support Bluetooth Built-in Bluetooth audio streaming Input Sensitivity 0.4V – 20V Selectable Load Resistors 10Ω, 20Ω, 60Ω and 20kΩ Operating Voltage Range 8V – 17V RCA Preamp Outputs 2 channels Frequency Response 10Hz – 30kHz Signal-to-Noise Ratio 95dB THD & Noise ≤0.03% Dimensions 8.8″ x 4.07″ x 1.38″ Net Weight 2.40 lbs Remote Compatibility Diamond Audio NeoDRC1 Remote Commander — sold separately Construction Marine-ready, water-resistant chassis Fitment warning: Verify amplifier placement, mounting clearance, wiring path, ventilation, and complete system layout before ordering or installation. 1000W RMS Dedicated Low-Frequency Power The NEO10001DSP is built for applications that need substantial output from a single low-frequency channel. It can be used with compatible subwoofers, midbass drivers, or other low-frequency speaker configurations where high current capability and precise signal control are required. 600W RMS @ 4Ω Provides strong output for compatible higher-impedance subwoofer and midbass configurations. 800W RMS @ 2Ω Increased output for compatible 2-ohm low-frequency speaker systems. 1000W RMS @ 1Ω Full rated monoblock output for compatible 1-ohm loads and high-output bass systems. Integrated 4-Channel DSP Although the NEO10001DSP is a monoblock amplifier, Diamond Audio integrates a 4-channel DSP platform into the chassis. Two DSP channels manage the internal amplifier signal path while two additional RCA preamp outputs can feed another amplifier or system component. 31-Band Parametric EQ Detailed frequency adjustment allows precise control of the low-frequency response and integration with the rest of the audio system. Crossovers and Time Delay Configure frequency limits and timing so the low-frequency system integrates properly with fairing, pod, saddlebag, or full-range speakers. Channel Linking DSP channel linking simplifies adjustments when multiple outputs require coordinated tuning. PC and Android Programming Diamond Audio provides programming support for detailed DSP configuration and system tuning. OEM Signal Integration The NEO10001DSP includes several integration tools for factory audio systems where conventional low-level RCA outputs may not be available. High- and low-level signal input capability from 0.4V up to 20V. Selectable onboard 10Ω, 20Ω, 60Ω, and 20kΩ load resistors. 8V to 17V operating-voltage compatibility. DSP-based signal management for complex OEM and aftermarket system layouts. Two RCA preamp outputs for additional amplifier expansion. Integration note: High-level input capability and selectable load resistors do not automatically make every factory motorcycle audio system plug-and-play. Verify the source unit, factory amplifier, signal type, required interface, and complete integration strategy before installation. Bluetooth Audio Streaming Built In Diamond Audio includes Bluetooth audio streaming directly in the NEO10001DSP. Compatible devices can stream audio directly to the amplifier and DSP without requiring the source signal to originate from a conventional head unit input. Diamond Audio also lists smartphone-control capability as part of the NEO platform, with dedicated iOS and Android app control continuing to develop separately from the amplifier's core DSP and Bluetooth functions. Designed for Motorcycle, Marine and Powersports Systems The NEO10001DSP uses a marine-ready, water-resistant chassis and compact form factor suited to motorcycle, powersports, marine, and custom installations where amplifier space can be limited. Water-Resistant Chassis Designed for demanding installations where moisture and environmental exposure must be considered. Staggered RCA Connections Connection placement helps simplify signal-wire routing and cable management in tight installations. Quick-Connect Power Block High-current removable power connections support cleaner installation and service access. Installation and System Planning Verify amplifier mounting space before ordering. Confirm the final speaker or subwoofer impedance presented to the amplifier. Match amplifier output to the RMS capability of the connected driver or drivers. Verify the motorcycle's source-unit and factory-amplifier signal configuration. Determine whether high-level inputs, RCA inputs, load resistors, or an external integration interface will be used. Plan use of the two DSP-controlled RCA outputs if additional amplification is part of the system. Verify battery, charging-system, wiring, fuse, and ground capacity for the complete audio system. Complete DSP tuning only after the entire system is installed and operating correctly. Need Help Designing the System? The NEO10001DSP combines amplifier power and DSP control in one chassis, but correct impedance, signal integration, electrical capacity, crossover strategy, and system tuning still determine how well the final installation performs. Start a Build Consultation Call 864-334-6131Sale -
SaleDiamond Audio DXM600.2D 2-Channel Waterproof Full Range Amplifier 600W RMS
Vendor:Diamond AudioDiamond Audio - DXM600.2D DXM Series 2-Channel 600W RMS Full Range Class D Waterproof Amplifier All weather amplifier for your OUTDOOR life (IPX67 Rated) Specifications Ratings: Power @ 2Ω: 300W RMS x 2 Power @ 4Ω: 200W RMS x 2 Power @ 4Ω Bridged: 600W RMS x 1 Total Harmonic Distortion: <0.3% S/N Ratio (1W@4Ω): >-102dB Gain Range: 0.2v-10v Crossover Range: 40Hz-400Hz Frequency Range: 10Hz-33KHz Bass Boost: 0dB-18dB Current Draw Full Power(Music): 70A (7A) AVG Fuse Rating: 35A Dimensions: 9.5”x4.3”x1.7” (241.6mm x 110mm x 44.0mm) Features Power & Protection Led Light Status Indicator Short Circuit, Thermal and Voltage Protection Selectable X-Over: LPF/FULL/HPF IPX67 Rated DXM Series Amplifier ManualDXM600.2D One SheetSale -
SaleDiamond Audio DXM800.4D 4-Channel Waterproof Full Range Amplifier 400W RMS
Vendor:Diamond AudioDiamond Audio - DXM800.4D DXM Series 4-Channel Full Range Class D Waterproof Amplifier All-weather amplifier for your OUTDOOR life (IPX67 Rated) Specifications Ratings: Power @ 2Ω: 200W RMS x 4 Power @ 4Ω: 125W RMS x 4 Power @ 4Ω Bridged: 400W RMS x 2CH Total Harmonic Distortion: <0.3% S/N Ratio (1W@4Ω): >-102dB Gain Range: 0.2v-10v Crossover Range: 40Hz-400Hz Frequency Range: 10Hz-33KHz Current Draw Full Power (Music): 93A (9.3A) AVG Fuse Rating: 45A Dimensions: 11.8”x4.3”x1.7” (298.6mm x 110mm x 44.0mm) Features Power & Protection Led Light Status Indicator Short Circuit, Thermal and Voltage Protection Selectable X-Over: LPF/FULL/HPF Selectable Input Modes: 2CH/4CH IPX67 Rated DXM Series Amplifier Manual DXM800.4D One SheetSale -
SaleDiamond Audio DXM1000.6D 6-Channel Waterproof Full Range Amplifier 1000W RMS
Vendor:Diamond AudioDiamond Audio - DXM1000.6D DXM Series Monoblock 1000W RMS Class D Waterproof Amplifier All weather amplifier for your OUTDOOR life (IPX67 Rated) Specifications Ratings: Power @ 2Ω: 150W RMS x 6 Power @ 4Ω: 100W RMS x 6 Power @ 4Ω Bridged: 340W RMS x 3CH Total Harmonic Distortion: <0.3% S/N Ratio (1W@4Ω): >-96dB Gain Range: 0.2v-10v Crossover Range: 40Hz-400Hz Frequency Range: 10Hz-33KHz Current Draw Full Power (Music): 105A (10.5A) AVG Fuse Rating: 50A Dimensions: 11.8”x4.3”x1.7” (298.6mm x 110mm x 44.0mm) Features Power & Protection Led Light Status Indicator Short circuit, thermal, and voltage protection Selectable X-Over: LPF/FULL/HPF Selectable Input Modes: 2CH/6CH IPX67 Rated Remote Bass Knob Included DXM Series Amplifier Manual DXM1000.6D One SheetSale -
Diamond Audio DXM1200.1D Waterproof Monoblock Amplifier 1200W RMS
Vendor:Diamond AudioDiamond Audio - DXM1200.1D DXM Series Monoblock 1200W RMS Class D Waterproof Amplifier All-weather amplifier for your OUTDOOR life (IPX67 Rated) Power @ 1Ω: 1200W RMS Power @ 2Ω: 800W RMS Power @ 4Ω: 500W RMS Total Harmonic Distortion: <0.3% S/N Ratio (1W@4Ω): >-102dB Gain Range: 0.2v-10v Crossover Range: 40Hz-250Hz Frequency Range: 40Hz-300Hz Sub Sonic: 10Hz-55Hz Bass Boost: 0dB-18dB Current Draw Full Power (Music): 140A (14A) AVG Fuse Rating: 70A Dimensions: 11.8”x4.3”x1.7” (298.6mm x 110mm x 44.0mm) Features Power & Protection Led Light Status Indicator Short Circuit, Thermal and Voltage Protection Selectable Phase: 0°-180° IPX67 Rated Remote Bass Knob Included DXM Series Amplifier Manual DXM1200.1D One Sheet -
SaleDiamond Audio Stage II Plug-N-Play Kit 2014-23 Harley Davidson
Vendor:Diamond AudioDiamond Audio Plug & Play Bundle Fits 2014-2023 Harley Davidson Baggers Upgrade your Harley Davidson’s audio system with the Diamond Audio Stage II Kit, designed for seamless integration and superior sound performance. This plug-and-play kit delivers powerful, high-quality audio, ensuring an unmatched riding experience with crystal-clear sound at any speed. Kit Details Diamond Audio MP654 Pro Coax 6.5” (2Ω) Speakers: High-performance speakers engineered to cut through wind and road noise. Diamond Audio DXM800.4 Marine Amplifier: A weather-resistant, high-efficiency amplifier built to handle extreme riding conditions while delivering clear, distortion-free power. Plug & Play Amplifier T-Harness: Simplifies installation with pre-configured connections for a hassle-free setup. Eight-Gauge Power and Ground Kit: Provides stable power delivery to support optimal amplifier performance. Batwing Universal Amplifier Rack & Shark Nose XEL Amp Rack: Secure mounting solutions designed to keep your amp stable and minimize vibrations on the road. Stock Pods on a 15-23 Road Glide will need modifications Diamond Audio’s Commitment to Excellence Diamond Audio has spent over 30 years developing top tier products to offer customers superior sound quality. These innovative amplifiers made with unmatched features utilize cutting-edge technology to prioritize perfection in performance, durability, and reliability. Diamond Audio full-range speakers offer powerful, distortion-free sound, no matter the road conditions. Designed for Harley Davidson Stereo Systems Precision-crafted to fit Harley Davidson motorcycle audio systems, this bundle is made to accommodate factory radios from 2014-2023 Harley models. Whether you're upgrading your Bagger’s audio for long highway rides or enhancing overall sound clarity, integrating a Diamond Audio amp offers a straightforward installation and an unmatched riding experience. Key Features This plug-and-play kit includes all the materials you need to set up a Diamond Audio amplifier with your Bagger. Complete with a DXM800.4 Marine Amplifier and the additional motor components needed for a high-end Harley radio setup, Garage Bagger Stereo's Diamond Audio Stage II 2014-2023 Harley Davidson baggers kit provides the ultimate convenience for Baggers. Enjoy unparalleled clarity, volume, and power on the road.Sale
About Diamond Audio
Based in Tempe, Arizona, Diamond Audio has been a trailblazer in the mobile audio industry since 1994. Known for breaking boundaries in innovation, technology, and performance, Diamond Audio has consistently set the standard for premium sound systems. Their dedication to quality and cutting-edge design has made them a highly desired brand among bikers and powersport enthusiasts.
Revolutionizing Motorcycle Audio
Diamond Audio’s motorcycle audio systems are designed to deliver unparalleled sound performance. With a focus on high efficiency and exceptional sound quality, these systems elevate your riding experience. Whether you are cruising through the city or hitting the open road, Diamond Audio ensures your music sounds as the artist intended, providing a concert-like experience on your motorcycle.
Unmatched Sound Quality
Diamond Audio’s products are engineered to deliver crystal-clear audio signals, maintaining the integrity of your digital music. Their advanced digital signal processing technology ensures that every note, beat, and lyric is heard with stunning clarity, making your rides more enjoyable and immersive.
Durable and Reliable Performance
Diamond Audio’s commitment to quality is evident in their durable and reliable products. Constructed with high-quality materials and designed to withstand the rigors of the road, their audio systems ensure consistent performance, even on long journeys. The solid-state design and recommended fuse settings guarantee reliable operation, allowing you to enjoy your music without interruption.
Diamond Audio Overview Video
Diamond Audio Collection Video
Key Specifications
| Collection Name | Diamond Audio Motorcycle Audio |
| Brand | Diamond Audio |
| Collection Type | Motorcycle Audio / Digital Sound Processor / Amplifiers / Speakers |
| Primary Fitment Focus | Harley Davidson motorcycle audio systems |
| Product Count | 37 products |
| Core Categories | DSP amplifiers, monoblock amplifiers, coaxial speakers, marine audio speakers, and powersports audio products |
| Use Case | High-output motorcycle audio builds with real tuning control, clean power, and proven performance |
Verify fitment, mounting depth, amplifier placement, wiring path, and full system design before ordering components for your motorcycle audio build.
Diamond Audio Motorcycle Audio at Garage Bagger Stereo
Shop Diamond Audio motorcycle amplifiers, digital sound processors, speakers, and powersports audio upgrades built for high-output Harley Davidson audio systems. This collection includes Diamond Audio DSP amplifiers, coaxial speakers, marine-grade options, and motorcycle-ready audio products selected for real-world fitment and performance.
Garage Bagger Stereo carries Diamond Audio products for riders who want serious system control, compact amplifier solutions, and speaker options designed for demanding motorcycle and powersports use.
DSP Amplifiers and System Control
This collection includes Diamond Audio DSP amplifiers like the NEO12004DSP, NEO15006DSP, and NEO10001DSP, giving Harley audio builders access to compact amplifier power with integrated tuning control for active and multi-amplifier systems.
Speakers for Motorcycle and Marine Use
Diamond Audio speaker options in this collection include high-output coaxials, shallow-mount applications, and marine-ready models that support clean installs and strong output across motorcycle and outdoor audio builds.
Built for Harley and Powersports Performance
From DSP amplifiers to high-output speakers, this collection is built for motorcycle audio systems that demand clean power, tuning control, and reliable performance. Whether you are building a complete Harley touring system or upgrading specific parts of an existing setup, Diamond Audio gives you strong options for amplifier control, speaker output, and system flexibility.
- Diamond Audio DSP amplifiers
- Motorcycle-ready multi-channel amplifiers
- Monoblock amplifier options for bass systems
- High-output coaxial speakers
- Marine-grade speaker options
- Products selected for real-world motorcycle audio use
Why Buy Diamond Audio from Garage Bagger Stereo?
Garage Bagger Stereo builds Harley Davidson audio systems around parts that actually work in the real world. This Diamond Audio collection is structured around products that support serious motorcycle audio builds with proven amplifier control, speaker performance, and installation practicality.
If you need help choosing the right Diamond Audio amplifier, DSP, or speaker setup for your bike, call us before you order and we will help you map the right system.
Need Help Deciding?
Speak now to one of our sales consultants or support team.
Diamond Audio at Garage Bagger Stereo
At Garage Bagger Stereo, we pride ourselves on offering only the best in motorcycle audio equipment, and Diamond Audio is a prime example of the elite brands we feature. Understanding the importance of superior sound quality for your ride, we have partnered with Diamond Audio to provide their exceptional range of products to our customers.