Hertz Motorcycle Audio for Harley-Davidson Baggers
Shop Hertz motorcycle speakers, subwoofers, amplifiers, DSP and plug-and-play kits for Harley-Davidson and Indian baggers. Garage Bagger Stereo helps match Hertz components to your bike's speaker locations, amplifier and system goals.
Hertz Built for Real Bagger Builds
Hertz is a performance-oriented audio brand, and this collection pulls its motorcycle speakers, amplification, DSP and kits together for Harley Touring builds.
- SPL Show NEO coaxial, midrange and tweeter options
- SP4.900 amplifier and S8 DSP
- Plug-and-play speaker kits and saddlebag lid kits for Harley Touring
Browse Collections
-
SaleHertz HD14H 6X9″ Saddlebag Speaker Installation Kit 2014-2023
Vendor:HertzHertz HD14H Cut-In Saddlebag Speaker Installation Kit for 2014-2023 Harley-Davidson® Touring Models The 6″ x 9″ Saddlebag Lid Kit is designed for select 2014-2023 Harley-Davidson® motorcycles with hard bags. The kit comes without speakers to let you add almost any speaker you want to your factory bag lids. This kit is not compatible with models with electric locks. Performance-Oriented Products from Hertz The company name “Hertz” references the unit of frequency, and their offerings reflect their philosophy of top audio performance and design. The enthusiasm lies at the heart of everything they do, and they have built a passionate, talented team that is committed to designing products at the top level of audio performance. From fairing speakers to speaker ring adapters, their wide range of products are built to contribute to a better overall sound system. Hertz’s commitment to excellence is reflected in every detail of the brand’s product lineup, from the materials selected to the meticulous tuning of each component. Premium Sound for Ultimate Satisfaction By prioritizing premium sound, Hertz’s saddlebag speaker kit offers an innovative selection of products for effortless installation with speaker lids. This kit is engineered specifically for 2014-2023 Harley-Davidson motorcycles, including popular models like Road Glide and Street Glide. By bringing together Hertz’s elite sound quality and user-friendly installation, this speaker system offers a full-range, immersive sound that adds excitement to every ride, whether it’s a city cruise or a drive on the open road. Compatible with 2014-2023 Harley-Davidson Motorcycle Models This speaker installation kit can be used with the audio systems of 2014-2023 Harley-Davidson models. The kit is complete with installation instructions and the hardware needed for a seamless setup. Engineered for compatibility, it allows for a smooth fit with existing bike setups. Hertz’s speaker kit integrates cleanly into the factory configuration, delivering an enhanced audio experience while maintaining the motorcycle's stock aesthetics. Saddlebag Speaker Install Kit for Hassle-Free Setup With this audio kit, riders don’t have to worry about complex modifications or replacing saddlebags when upgrading their bike’s sound systems. The installer-friendly cutting guide and mounting arrangement allow you to install saddlebag lid speakers with a more powerful sound without the need to replace or paint the saddlebags. Kit Contents Saddlebag Lid Saddlebag Lid Cut Template for Exact Fitment Adapters to Install 6” x 9” Speaker to Stock Black Speaker Grills w/ Premium Fit-n-Finish Key Features Speakers Not Included Designed for Hertz SX690Neo Full Range Speakers Will work with other speakers, but a spacer may be required Now add 8s to these lidsSale -
SaleHertz HD24H 6x9″ Saddlebag Speaker Cut-In Kit w/ Wiring for 2024-Present Harley-Davidson® Touring Base and CVO ST
Vendor:HertzHertz HD24H 6X9″ Saddlebag Speaker Cut In Kit w/ Wiring Hertz HD24H Harley Davidson Motorcycle Audio Install 6×9″ Speaker to OE Saddlebag Lid, Lid Cut Template Included Black Speaker Grills with Premium Fit-n-Finish Included For 2024-Present Harley Davidson® Touring Base Models Current lead time 5-15 business days HD24H Hertz 6×9 Saddlebag Lid Kit without speakers lets you add Hertz SX690H speakers to your factory bag lids. Designed for select 2024-Present Harley-Davidson® motorcycles with hard-shell bags. The kit is intended and meant to fit ideally with Hertz SX690H Full Range Speakers. HASSLE-FREE INSTALLATION The installer-friendly cutting guide and mounting arrangement means you can enjoy the more powerful sound without replacing the saddlebags or dealing with painting. Kit includes all hardware, Rear Harnessing, and integrated Hertz grilles. Product Highlights Saddlebag Lid Cutout Template for Exact Fitment Included Black Speaker Grills w/ Premium Fit-n-Finish Included Optimized for Hertz SX690H 6×9 Speakers Does not work with Hertz SX690NEO Speakers Vehicle Information 2024-Present Harley Davidson® Base Model Street Glide 2024-Present Harley Davidson® Base Model Road Glide 2024 Harley Davidson® CVO Road Glide STSale -
Hertz 8" SX 200 Neo Speaker (Pair)
Vendor:HertzThe Hertz SX 200 Neo is a weather-resistant 8 inch 2-way coaxial speaker from the SPL Show line, supplied as a pair with grilles. It uses a neodymium magnet and a PEI dome tweeter with a resettable protection circuit.Key Specs 4 ohm; power handling 130 W RMS / 260 W max 1-7/16 in PEI dome tweeter with resettable protection circuit Weather-resistant woofer cones; neodymium magnet Efficiency 99.5 dB; frequency response 100 Hz-20 kHz Top-mount depth 3-3/8 in Box includes two speakers, two grilles, grille putty, eight 1 in screws, eight speed clips and an owner's manual Fitment and Installation NotesA mounting template is printed on the box.Browse more pro coaxial speakers and coaxial speakers and Hertz, or ask about a custom build.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
Hertz MPS 250 S2 10" 2Ω Mille PRO Shallow Subwoofer
Vendor:HertzThe Hertz MPS 250 S2 is a shallow 10" 2 ohm Mille PRO subwoofer for builds where mounting depth is limited, including custom bagger saddlebag installs.Key Specs Size: 10" (250 mm), 2 ohm single voice coil Power handling: 500W continuous, 1000W peak Voice coil: 38 mm (1.5") six-layer copper Mounting depth: 3.25" (82.6 mm) Metal grille included Fitment and Installation NotesVerify available mounting depth and enclosure volume before building, and match the 2 ohm impedance to your amplifier.Related: Motorcycle Subwoofers and Hertz. Need something custom? Our custom build team can help.Not sure what fits your bike? Start a build consultation or call 864-334-6131. -
SaleHertz HD13RG Road Glide Speaker Grills 1998-2013 (Pair)
Vendor:HertzHertz HD13RG Road Glide Speaker Grills 1998-2013 (Pair) Hertz-branded front fairing speaker grills for the 1998-2013 Road Glide. Direct OEM-style fit, so they go on with no modifications. Motorcycle Speaker GrillsSpeaker InstallationHertz Motorcycle Audio Front Fairing GrillsHertz grills for the 1998-2013 Road Glide fairing. Supplied by American Hard Bag for the Hertz motorcycle program. Direct fit for 1998-2013 Road Glide No modifications needed Hertz-branded front fairing grills Start a Build ConsultationCall 864-334-6131 Key Product Details Brand Hertz (supplied by American Hard Bag) Model HD13RG Hertz Description Hertz Front Road Glide Speaker Grill 1998-2013 Position Front fairing speakers Fits 1998-2013 Harley-Davidson Road Glide Confirm your model, year and radio before ordering.Hertz Branding on the Front Speakers Factory grills crack, fade and dent. The HD13RG replaces the front fairing speaker grills on the 1998-2013 Road Glide with Hertz-branded grills, so the front of the bike matches a Hertz speaker upgrade. Grills don't make the speakers louder. They protect the cones and finish the install. If you're replacing the grills because you're replacing the speakers, plan both together.Fitment and Part Numbers Model Years 1998-2013 Models Listed Road Glide Hertz Front Grills by Bike HD13RG (1998-2013 Road Glide), HD13SG (1998-2013 Street Glide), HD15RG (2015-2023 Road Glide), HD14SG (2014-2023 Street Glide) Not Listed Road King (no fairing) From the Hertz motorcycle price sheet and the American Hard Bag listing.Fitment Notes These grills are for the 1998-2013 Road Glide front fairing. Road Glide and Street Glide fairings are different, so match the grill to your bike, not just the year. Upgrading the speakers behind them? Start with the Hertz SX 165 NEO or browse motorcycle speaker grills.What to Pair With the HD13RG Hertz speakers and power for the front of the bike. Hertz SX 165 NEO 6.5" Coaxial Hertz's 6.5" 2-way SPL coax with neo magnet and UV/waterproofing. The fairing speaker in Hertz's Harley sound packs. Hertz SV 165 NEO 6.5" Midrange 6.5" 4Ω SPL midrange set with neo magnet and UV/waterproofing. Hertz runs it in its Tour-Pak kits. Hertz SP 4.900 4-Channel Amplifier Hertz's D-Class 4-channel amp, 250 W RMS x 4 at 2Ω, IP55 rated. The amp Hertz builds its Harley sound packs around. Motorcycle Speaker Grills Every fairing, lid and Tour-Pak grill we carry, sorted by bike. Related Hertz & Motorcycle Audio Paths Grills, speakers and install parts for the same bike. Shop motorcycle speaker grills Shop motorcycle speaker installation parts Shop 6.5" Harley speakers Shop 1998-2013 Harley-Davidson audio Shop Hertz motorcycle audio Best Use for the HD13RG Replacing worn or damaged front grills on a 1998-2013 Road Glide, or finishing a Hertz speaker upgrade with matching branding. Before You Order Send us your model, year and radio. We will confirm you are ordering the right fairing grill before it ships. HD13RG FAQ What is the Hertz HD13RG? It is a set of Hertz-branded front fairing speaker grills for the 1998-2013 Harley-Davidson Road Glide, supplied by American Hard Bag for the Hertz motorcycle program. Which bikes does it fit? 1998-2013 Harley-Davidson Road Glide. Send us your model and year if you are not sure. Does it fit a Road King? No. Road King has no fairing, and these are front fairing grills. Are speakers included? No. These are grills only. Speakers are sold separately. Do I need to modify the fairing? No. American Hard Bag lists them as a direct OEM-style fit with no modifications needed. Which grill fits a 2015-2023 Road Glide? Hertz lists the HD15RG for the 2015-2023 Road Glide. Does Garage Bagger Stereo install it? Garage Bagger Stereo offers motorcycle audio installation at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131 to check scheduling.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz HD15RG Road Glide Speaker Grills 2015-2023 (Pair)
Vendor:HertzHertz HD15RG Road Glide Speaker Grills 2015-2023 (Pair) Hertz-branded replacement front fairing speaker grills for the 2015-2023 Road Glide with GT/GTS radio, made for the Road Glide's fairing. Motorcycle Speaker GrillsSpeaker InstallationHertz Motorcycle Audio Front Fairing GrillsHertz grills for the 2015-2023 Road Glide fairing. Supplied by American Hard Bag for the Hertz motorcycle program. 2015-2023 Road Glide with GT/GTS radio Precision fit to the Road Glide fairing Hertz-branded front fairing grills Start a Build ConsultationCall 864-334-6131 Key Product Details Brand Hertz (supplied by American Hard Bag) Model HD15RG Hertz Description Hertz Front Road Glide Speaker Grill 2015-2023 Position Front fairing speakers Fits 2015-2023 Harley-Davidson Road Glide equipped with GT/GTS radios Confirm your model, year and radio before ordering.Hertz Branding on the Front Speakers Factory grills crack, fade and dent. The HD15RG replaces the front fairing speaker grills on the 2015-2023 Road Glide with Hertz-branded grills, so the front of the bike matches a Hertz speaker upgrade. Grills don't make the speakers louder. They protect the cones and finish the install. If you're replacing the grills because you're replacing the speakers, plan both together.Fitment and Part Numbers Model Years 2015-2023 Models Listed Road Glide with GT/GTS radio Hertz Front Grills by Bike HD15RG (2015-2023 Road Glide), HD14SG (2014-2023 Street Glide), HD13RG (1998-2013 Road Glide), HD13SG (1998-2013 Street Glide) Not Listed Road King (no fairing) From the Hertz motorcycle price sheet and the American Hard Bag listing.Fitment Notes These grills are for the 2015-2023 Road Glide front fairing. Road Glide and Street Glide fairings are different, so match the grill to your bike, not just the year. Upgrading the speakers behind them? Start with the Hertz SX 165 NEO or browse motorcycle speaker grills.What to Pair With the HD15RG Hertz speakers and power for the front of the bike. Hertz SX 165 NEO 6.5" Coaxial Hertz's 6.5" 2-way SPL coax with neo magnet and UV/waterproofing. The fairing speaker in Hertz's Harley sound packs. Hertz 2014-2023 Plug and Play Fairing Kit Hertz's 2014-2023 front speaker kit with amp. Speakers, amp and harness in one box. Hertz SP 4.900 4-Channel Amplifier Hertz's D-Class 4-channel amp, 250 W RMS x 4 at 2Ω, IP55 rated. The amp Hertz builds its Harley sound packs around. Motorcycle Speaker Grills Every fairing, lid and Tour-Pak grill we carry, sorted by bike. Related Hertz & Motorcycle Audio Paths Grills, speakers and install parts for the same bike. Shop motorcycle speaker grills Shop motorcycle speaker installation parts Shop 6.5" Harley speakers Shop 2014-2023 Harley-Davidson audio Shop Hertz motorcycle audio Best Use for the HD15RG Replacing worn or damaged front grills on a 2015-2023 Road Glide, or finishing a Hertz speaker upgrade with matching branding. Before You Order Send us your model, year and radio. We will confirm you are ordering the right fairing grill before it ships. HD15RG FAQ What is the Hertz HD15RG? It is a set of Hertz-branded front fairing speaker grills for the 2015-2023 Harley-Davidson Road Glide, supplied by American Hard Bag for the Hertz motorcycle program. Which bikes does it fit? 2015-2023 Harley-Davidson Road Glide equipped with GT/GTS radios. Send us your model and year if you are not sure. Does it fit a Road King? No. Road King has no fairing, and these are front fairing grills. Are speakers included? No. These are grills only. Speakers are sold separately. Which radio does it need? American Hard Bag lists these grills for 2015-2023 Road Glide models equipped with GT/GTS radios. Which grill fits a 2014-2023 Street Glide? Hertz lists the HD14SG for the 2014-2023 Street Glide. Does Garage Bagger Stereo install it? Garage Bagger Stereo offers motorcycle audio installation at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131 to check scheduling.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz HD14SG Street Glide Speaker Grills 2014-2023 (Pair)
Vendor:HertzHertz HD14SG Street Glide Speaker Grills 2014-2023 (Pair) Hertz-branded replacement front fairing speaker grills for the 2014-2023 Street Glide with GT/GTS radio, made to match the factory fairing. Motorcycle Speaker GrillsSpeaker InstallationHertz Motorcycle Audio Front Fairing GrillsHertz grills for the 2014-2023 Street Glide fairing. Supplied by American Hard Bag for the Hertz motorcycle program. 2014-2023 Street Glide with GT/GTS radio Made to match the factory fairing Hertz-branded front fairing grills Start a Build ConsultationCall 864-334-6131 Key Product Details Brand Hertz (supplied by American Hard Bag) Model HD14SG Hertz Description Hertz Front Street Glide Speaker Grill 2014-2023 Position Front fairing speakers Fits 2014-2023 Harley-Davidson Street Glide equipped with GT/GTS radios Confirm your model, year and radio before ordering.Hertz Branding on the Front Speakers Factory grills crack, fade and dent. The HD14SG replaces the front fairing speaker grills on the 2014-2023 Street Glide with Hertz-branded grills, so the front of the bike matches a Hertz speaker upgrade. Grills don't make the speakers louder. They protect the cones and finish the install. If you're replacing the grills because you're replacing the speakers, plan both together.Fitment and Part Numbers Model Years 2014-2023 Models Listed Street Glide with GT/GTS radio Hertz Front Grills by Bike HD14SG (2014-2023 Street Glide), HD15RG (2015-2023 Road Glide), HD13SG (1998-2013 Street Glide), HD13RG (1998-2013 Road Glide) Not Listed Road King (no fairing) From the Hertz motorcycle price sheet and the American Hard Bag listing.Fitment Notes These grills are for the 2014-2023 Street Glide front fairing. Road Glide and Street Glide fairings are different, so match the grill to your bike, not just the year. Upgrading the speakers behind them? Start with the Hertz SX 165 NEO or browse motorcycle speaker grills.What to Pair With the HD14SG Hertz speakers and power for the front of the bike. Hertz SX 165 NEO 6.5" Coaxial Hertz's 6.5" 2-way SPL coax with neo magnet and UV/waterproofing. The fairing speaker in Hertz's Harley sound packs. Hertz 2014-2023 Plug and Play Fairing Kit Hertz's 2014-2023 front speaker kit with amp. Speakers, amp and harness in one box. Hertz SP 4.900 4-Channel Amplifier Hertz's D-Class 4-channel amp, 250 W RMS x 4 at 2Ω, IP55 rated. The amp Hertz builds its Harley sound packs around. Motorcycle Speaker Grills Every fairing, lid and Tour-Pak grill we carry, sorted by bike. Related Hertz & Motorcycle Audio Paths Grills, speakers and install parts for the same bike. Shop motorcycle speaker grills Shop motorcycle speaker installation parts Shop 6.5" Harley speakers Shop 2014-2023 Harley-Davidson audio Shop Hertz motorcycle audio Best Use for the HD14SG Replacing worn or damaged front grills on a 2014-2023 Street Glide, or finishing a Hertz speaker upgrade with matching branding. Before You Order Send us your model, year and radio. We will confirm you are ordering the right fairing grill before it ships. HD14SG FAQ What is the Hertz HD14SG? It is a set of Hertz-branded front fairing speaker grills for the 2014-2023 Harley-Davidson Street Glide, supplied by American Hard Bag for the Hertz motorcycle program. Which bikes does it fit? 2014-2023 Harley-Davidson Street Glide equipped with GT/GTS radios. Send us your model and year if you are not sure. Does it fit a Road King? No. Road King has no fairing, and these are front fairing grills. Are speakers included? No. These are grills only. Speakers are sold separately. Which radio does it need? American Hard Bag lists these grills for 2014-2023 Street Glide models equipped with GT/GTS radios. Which grill fits a 2015-2023 Road Glide? Hertz lists the HD15RG for the 2015-2023 Road Glide. Does Garage Bagger Stereo install it? Garage Bagger Stereo offers motorcycle audio installation at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131 to check scheduling.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz HSP3-13 4-Speaker Kit with Saddlebag 6x9 Lids for 1998-2013 Harley
Vendor:HertzHertz HSP3-13 4-Speaker Kit with Saddlebag 6x9 Lids for 1998-2013 Harley The Hertz HSP3-13 is a plug and play four-speaker sound pack for 1998-2013 Harley-Davidson touring bikes. It puts an SP 4.900 four-channel amplifier behind a pair of SX 165 NEO fairing speakers and a pair of SX 690 NEO.1 6×9 speakers in the saddlebag lids. The kit ships with the HD13H saddlebag lid kit and speaker harness, the HTHP13 T-Power harness, the HD13AP amplifier mounting bracket and both Street Glide and Road Glide front speaker grilles. Shop HertzHarley Plug and Play Kits1998-2013 Harley Audio 1998-2013 HARLEY-DAVIDSON FAIRING AND SADDLEBAG SOUND PACKFour-Speaker 1998-2013 Sound Pack SP 4.900 power for fairing and saddlebag speakers in one 1998-2013 kit. 250W RMS × 4 at 2Ω / 160W RMS × 4 at 4Ω SX 165 NEO fairing pair + SX 690 NEO.1 6×9 pair HD13H lid kit, HTHP13 harness, SG and RG grilles Start a Build ConsultationCall 864-334-6131 Amplifier mounting: The included HD13AP is listed as an amplifier mounting plate and bracket mount for Road Glide. On a Street Glide or other batwing bike, confirm the amplifier location with us before ordering. Key Product Details Kit Model / SKU HSP3-13 Brand Hertz (Elettromedia) Vehicle Application 1998-2013 Harley-Davidson touring models Amplifier Hertz SP 4.900 four-channel Fairing Speakers Hertz SX 165 NEO 6.5-inch coaxials (pair) Saddlebag Speakers Hertz SX 690 NEO.1 6×9 three-way coaxials (pair) Speaker Impedance 4Ω per speaker Saddlebag Lid Kit HD13H lid kit with speaker harness Power Harness HTHP13 T-Power harness Amplifier Mount HD13AP amplifier mounting bracket Front Grilles Street Glide and Road Glide speaker grilles Speakers in Kit Four Listed for 1998-2013 Harley-Davidson touring models. Verify your year, fairing style, factory radio and saddlebag lids before ordering.Hertz Front and Saddlebag Audio for 1998-2013 Harley-Davidson The HSP3-13 covers both ends of a 1998-2013 bagger in one box. The SX 165 NEO coaxials go in the front fairing and the SX 690 NEO.1 6×9 speakers go in the saddlebag lids through the included HD13H lid kit. All four speakers are 4Ω and the SP 4.900 is rated for a 2Ω minimum load per channel in four-channel mode. The HTHP13 T-Power harness and HD13AP bracket are the install parts American Hard Bag supplies for this generation of bike. SP 4.900 Amplifier: Four channels of D-class power in an IP55 aluminum chassis with no cooling fan and sealed connections. Hertz rates it at 160W RMS × 4 at 4Ω. Fairing Pair: Two SX 165 NEO two-way coaxials, 4Ω, rated 100W continuous each, with 96.5dB sensitivity. Saddlebag Pair: Two SX 690 NEO.1 6×9 three-way coaxials, 4Ω, rated 130W continuous each, with 94dB sensitivity. Factory Radio Signal: The SP 4.900 takes pre-amp or speaker-level input and includes USS for head units that check for a speaker load.What's Included and Specifications Hertz SP 4.900 Four-Channel Amplifier IP55 D-class amplifier rated 160W RMS × 4 at 4Ω, 250W RMS × 4 at 2Ω or 500W RMS × 2 bridged at 4Ω, with USS for factory head units that use speaker load detection. HD13AP Amplifier Mounting Bracket Amplifier mounting plate and bracket mount (listed for Road Glide). Hertz SX 165 NEO Coaxial Speakers 6.5-inch two-way SPL coaxials, 4Ω, 100W continuous / 200W peak, 96.5dB sensitivity, neodymium motors and water-repellent, anti-UV cones. Hertz SX 690 NEO.1 3-Way Speakers 6×9-inch three-way coaxials, 4Ω, 130W continuous / 260W peak, 94dB sensitivity, 1.4-inch dome tweeter plus 1-inch super tweeter. HTHP13 T-Power Harness 1998-2013 T-Power harness supplied with the kit. HD13H Saddlebag Lid Kit with Speaker Harness 1998-2013 saddlebag lid kit with speaker harness for the 6×9 speakers. Street Glide and Road Glide Speaker Grilles Both front speaker grille styles are included in the kit. Kit contents are listed as published on the Elettromedia (Hertz) 2026 Hertz Moto price sheet. Component specifications are from Hertz product pages. SP 4.900 Amplifier Specifications Amplifier Model Hertz SPL Show SP 4.900 Amplifier Type Four-channel D-class amplifier (Hertz ADC output stage) Output at 4Ω 160W RMS × 4 channels at 14.4V Output at 2Ω 250W RMS × 4 channels at 14.4V Bridged Output 500W RMS × 2 channels at 4Ω, 14.4V Total RMS Power 1000W Minimum Load 2Ω in 4-channel mode / 4Ω bridged Chassis Protection IP55 aluminum chassis, no cooling fan, sealed power, input and speaker connections Inputs Pre-in (0.6–6 V RMS) and speaker-level in (2.2–22 V RMS) Speaker Load Detection USS (Universal Speakers Simulator) for head units with speaker load detection Crossovers Ch 1-2 high-pass / low-pass 50Hz–5kHz, Ch 3-4 high-pass 50Hz–5kHz, 12dB/octave Bass Boost 0–8dB (low-pass on only) Bandwidth 10Hz–35kHz (−3dB) Signal-to-Noise Ratio 105 dBA THD 0.02% at 100Hz, 4Ω, 70% rated power Damping Factor 200 Power Supply 11–15 VDC nominal / 6–16 VDC operating Dimensions 211.6 × 130 × 49 mm (8.3 × 5.1 × 1.9 in) Weight 2.15 kg SX 165 NEO Fairing Speakers Speaker Model Hertz SPL Show SX 165 NEO Speaker Type 6.5-inch (165mm) two-way SPL coaxial Quantity One pair Impedance 4Ω Power Handling 100W continuous / 200W peak per speaker Sensitivity 96.5dB Frequency Response 100Hz–20kHz Woofer Voice Coil 38mm Tweeter 35mm (1.4 in) neodymium PEI dome with resettable protection circuit Magnets N38H neodymium Cone Water-repellent pressed paper with anti-UV treatment Terminals Double Faston terminals SX 690 NEO.1 Saddlebag Speakers Speaker Model Hertz SPL Show SX 690 NEO.1 Speaker Type 6×9-inch three-way coaxial (1.4-in dome tweeter + 1-in dome super tweeter) Quantity One pair Impedance 4Ω Power Handling 130W continuous / 260W peak per speaker Sensitivity 94dB Woofer Voice Coil 38mm Magnets N38H neodymium Cone Water-repellent pressed paper with anti-UV treatment Tweeter Protection Resettable solid-state protection circuit Terminals Double Faston terminals Recommended System Planning The HTHP13 T-Power harness and HD13H lid harness are part of the kit, and the amplifier mounts on the HD13AP bracket. Both Street Glide and Road Glide front grilles are in the box, so the kit is not limited to one fairing style. We install Hertz kits at our Taylors, SC shop. If you are doing it yourself, call us before you start so we can walk through the parts for your exact bike. Gain setting matters: At 4Ω the SP 4.900 is rated for 160W RMS per channel, which is more than the continuous rating of every speaker in this kit. Set the gains so each channel stays inside the speaker's continuous rating. Saddlebag lids: Confirm your saddlebag lid style and any lid modification needed for the HD13H kit before you start.What to Pair With the HSP3-13 Everything to run the kit is in the box. These are the same parts sold on their own, plus power support. Hertz SP 4.900 Amplifier The IP55 four-channel amplifier used in every Hertz sound pack, sold on its own. Hertz SX 165 NEO 6.5-inch Coaxials The fairing coaxial pair from this kit, sold separately as a replacement or spare pair. Hertz SX 690 NEO.1 6x9 Speakers The 6x9 three-way pair from this kit, sold separately. Motorcycle Audio Batteries Battery upgrades for builds that run the amplifier hard. Ask us whether your charging system needs one. Related Hertz & Motorcycle Audio Paths Build around the right parts for a 1998-2013 bagger. Shop Hertz Motorcycle Audio 1998-2013 Harley-Davidson Audio 1998-2013 Harley Speaker Lids Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Hertz HSP3 for 2014-2023 Harley Best Use for the HSP3-13 1998-2013 Street Glide and Road Glide owners who want front and saddlebag speakers powered by one IP55 amplifier while keeping the factory radio. Built Around Real Motorcycle Audio Wind, road speed and weather all work against bagger audio. Neodymium SPL speakers with weather-treated cones and a sealed IP55 amplifier are what this kit is built on. Hertz HSP3-13 FAQ What comes in the HSP3-13 kit? An SP 4.900 amplifier, HD13AP amplifier mounting bracket, SX 165 NEO coaxial speakers, SX 690 NEO.1 6x9 3-way speakers, the HTHP13 T-Power harness, the HD13H saddlebag lid kit with speaker harness, and both Street Glide and Road Glide speaker grilles. Which years does it fit? Hertz lists the HSP3-13 for 1998-2013 Harley-Davidson motorcycles. Confirm your exact bike with us before ordering. Does it fit Street Glide and Road Glide? The kit includes both Street Glide and Road Glide front speaker grilles. The HD13AP amplifier bracket is listed for Road Glide, so call us to confirm amplifier mounting on a Street Glide. What impedance are the speakers? All four speakers are 4 ohms. How much power does the SP 4.900 make? Hertz rates the SP 4.900 at 160W RMS × 4 at 4Ω, 250W RMS × 4 at 2Ω and 500W RMS × 2 bridged at 4Ω, 1000W RMS total at 14.4V. Will the amplifier work with a factory head unit? The SP 4.900 accepts pre-amp or speaker-level input and includes USS (Universal Speakers Simulator) for head units with speaker load detection. Can the amplifier overpower the speakers? Yes, if the gains are set too high. The SP 4.900 is rated 160W RMS per channel at 4 ohms, while the SX 165 NEO is rated 100W continuous and the SX 690 NEO.1 130W continuous. Set the gains to protect the speakers. Are the speakers weather resistant? Hertz SPL Show NEO speakers use water-repellent pressed-paper cones with water, humidity and anti-UV treatment, and the SP 4.900 uses an IP55-rated aluminum chassis.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz HSP2-13 4-Speaker Tour-Pak Kit for 1998-2013 Harley
Vendor:HertzHertz HSP2-13 4-Speaker Tour-Pak Kit for 1998-2013 Harley The Hertz HSP2-13 is a plug and play four-speaker kit for 1998-2013 Harley-Davidson bikes equipped with Touring Packs. It pairs an SP 4.900 four-channel amplifier with SX 165 NEO coaxial speakers and SV 165 NEO midrange speakers. The HTHP13 T-Power harness, HD13AP amplifier mounting bracket and both Street Glide and Road Glide speaker grilles are included. Shop HertzHarley Plug and Play Kits1998-2013 Harley Audio 1998-2013 HARLEY-DAVIDSON TOUR-PAK SOUND PACKFour-Speaker Tour-Pak Sound Pack Front coaxials and SPL midrange for 1998-2013 bikes with Touring Packs. Hertz SP 4.900 four-channel amplifier SX 165 NEO coaxials + SV 165 NEO midrange HTHP13 harness, HD13AP bracket, SG and RG grilles Start a Build ConsultationCall 864-334-6131 Amplifier mounting: The included HD13AP is listed as an amplifier mounting plate and bracket mount for Road Glide. On a Street Glide or other batwing bike, confirm the amplifier location with us before ordering. Key Product Details Kit Model / SKU HSP2-13 Brand Hertz (Elettromedia) Vehicle Application 1998-2013 Harley-Davidson motorcycles equipped with Touring Packs Amplifier Hertz SP 4.900 four-channel Coaxial Speakers Hertz SX 165 NEO 6.5-inch (pair) Midrange Speakers Hertz SV 165 NEO 6.5-inch (pair) Speaker Impedance 4Ω per speaker Power Harness HTHP13 T-Power harness Amplifier Mount HD13AP amplifier mounting bracket Grilles Street Glide and Road Glide speaker grilles Speakers in Kit Four Listed for 1998-2013 Harley-Davidson motorcycles equipped with Touring Packs. Verify your year, fairing, factory radio and Tour-Pak speaker setup before ordering.Hertz Tour-Pak Audio for 1998-2013 Harley-Davidson The HSP2-13 is the Tour-Pak version of the 1998-2013 Hertz sound pack. Instead of saddlebag lid speakers, it adds a pair of SV 165 NEO SPL midrange speakers alongside the SX 165 NEO coaxials, all driven by the SP 4.900. Every speaker in the kit is 4Ω. The SV 165 NEO is a midrange driver with a 100Hz–10kHz published response, so it is built for vocals and midrange output rather than full-range high frequencies. SP 4.900 Amplifier: Four D-class channels in an IP55 aluminum chassis, rated 160W RMS × 4 at 4Ω. SX 165 NEO Coaxials: Two-way 6.5-inch coaxials, 4Ω, 100W continuous each, 96.5dB sensitivity. SV 165 NEO Midrange: 6.5-inch SPL midrange, 4Ω, 150W continuous each, 97dB sensitivity. Factory Radio Signal: Pre-amp or speaker-level input with USS for head units that check for a speaker load.What's Included and Specifications Hertz SP 4.900 Four-Channel Amplifier IP55 D-class amplifier rated 160W RMS × 4 at 4Ω, 250W RMS × 4 at 2Ω or 500W RMS × 2 bridged at 4Ω, with USS for factory head units that use speaker load detection. HD13AP Amplifier Mounting Bracket Amplifier mounting plate and bracket mount (listed for Road Glide). Hertz SX 165 NEO Coaxial Speakers 6.5-inch two-way SPL coaxials, 4Ω, 100W continuous / 200W peak, 96.5dB sensitivity, neodymium motors and water-repellent, anti-UV cones. Hertz SV 165 NEO Midrange Speakers 6.5-inch SPL midrange speakers, 4Ω, 150W continuous / 400W peak, 97dB sensitivity, waterproofed anti-UV cones. HTHP13 T-Power Harness 1998-2013 T-Power harness supplied with the kit. Street Glide and Road Glide Speaker Grilles Both front speaker grille styles are included in the kit. Kit contents are listed as published on the Elettromedia (Hertz) 2026 Hertz Moto price sheet. Component specifications are from Hertz product pages. SP 4.900 Amplifier Specifications Amplifier Model Hertz SPL Show SP 4.900 Amplifier Type Four-channel D-class amplifier (Hertz ADC output stage) Output at 4Ω 160W RMS × 4 channels at 14.4V Output at 2Ω 250W RMS × 4 channels at 14.4V Bridged Output 500W RMS × 2 channels at 4Ω, 14.4V Total RMS Power 1000W Minimum Load 2Ω in 4-channel mode / 4Ω bridged Chassis Protection IP55 aluminum chassis, no cooling fan, sealed power, input and speaker connections Inputs Pre-in (0.6–6 V RMS) and speaker-level in (2.2–22 V RMS) Speaker Load Detection USS (Universal Speakers Simulator) for head units with speaker load detection Crossovers Ch 1-2 high-pass / low-pass 50Hz–5kHz, Ch 3-4 high-pass 50Hz–5kHz, 12dB/octave Bass Boost 0–8dB (low-pass on only) Bandwidth 10Hz–35kHz (−3dB) Signal-to-Noise Ratio 105 dBA THD 0.02% at 100Hz, 4Ω, 70% rated power Damping Factor 200 Power Supply 11–15 VDC nominal / 6–16 VDC operating Dimensions 211.6 × 130 × 49 mm (8.3 × 5.1 × 1.9 in) Weight 2.15 kg SX 165 NEO Coaxial Speakers Speaker Model Hertz SPL Show SX 165 NEO Speaker Type 6.5-inch (165mm) two-way SPL coaxial Quantity One pair Impedance 4Ω Power Handling 100W continuous / 200W peak per speaker Sensitivity 96.5dB Frequency Response 100Hz–20kHz Woofer Voice Coil 38mm Tweeter 35mm (1.4 in) neodymium PEI dome with resettable protection circuit Magnets N38H neodymium Cone Water-repellent pressed paper with anti-UV treatment Terminals Double Faston terminals SV 165 NEO Midrange Speakers Speaker Model Hertz SPL Show SV 165 NEO Speaker Type 6.5-inch (165mm) SPL midrange Quantity One pair Impedance 4Ω Power Handling 150W continuous / 400W peak per speaker Sensitivity 97dB Frequency Response 100Hz–10kHz Voice Coil 38.6mm (1.5 in) Mounting Depth 57.1mm Cone Water-repellent pressed paper with waterproofing and anti-UV treatment Mounting Terminals and mounting holes compatible with Harley-Davidson installation (per Hertz) Recommended System Planning This kit is listed for bikes equipped with Touring Packs. The HTHP13 T-Power harness is included and the amplifier mounts on the HD13AP bracket. We install Hertz kits at our Taylors, SC shop. If you are installing it yourself, call us first so we can confirm the parts for your bike. Gain setting matters: At 4Ω the SP 4.900 is rated for 160W RMS per channel, which is more than the continuous rating of every speaker in this kit. Set the gains so each channel stays inside the speaker's continuous rating.What to Pair With the HSP2-13 Everything to run the kit is in the box. These are the same parts sold on their own, plus power support. Hertz SP 4.900 Amplifier The IP55 four-channel amplifier used in every Hertz sound pack, sold on its own. Hertz SX 165 NEO 6.5-inch Coaxials The fairing coaxial pair from this kit, sold separately as a replacement or spare pair. Hertz SV 165 NEO Midrange Speakers The 6.5-inch SPL midrange pair from this kit, sold separately. Motorcycle Audio Batteries Battery upgrades for builds that run the amplifier hard. Ask us whether your charging system needs one. Related Hertz & Motorcycle Audio Paths Build around the right parts for a 1998-2013 Tour-Pak bike. Shop Hertz Motorcycle Audio 1998-2013 Harley-Davidson Audio Motorcycle Audio Tour Paks Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Hertz HSP2 for 2014-2023 Harley Best Use for the HSP2-13 1998-2013 Tour-Pak equipped baggers that want more midrange output from the rear while keeping the factory radio. Built Around Real Motorcycle Audio Midrange carries vocals over wind noise. The SV 165 NEO is a 97dB SPL midrange with waterproofed, anti-UV cones. Hertz HSP2-13 FAQ What comes in the HSP2-13 kit? An SP 4.900 amplifier, HD13AP amplifier mounting bracket, SX 165 NEO coaxial speakers, SV 165 NEO midrange speakers, the HTHP13 T-Power harness, and both Street Glide and Road Glide speaker grilles. Which bikes is it listed for? 1998-2013 Harley-Davidson motorcycles equipped with Touring Packs. Confirm your exact bike with us before ordering. Does this kit include saddlebag speakers? No. The HSP2-13 is the Tour-Pak kit. The HSP3-13 is the version with the saddlebag 6x9 lid kit. What impedance are the speakers? All four speakers are 4 ohms. How much power does the SP 4.900 make? Hertz rates the SP 4.900 at 160W RMS × 4 at 4Ω, 250W RMS × 4 at 2Ω and 500W RMS × 2 bridged at 4Ω, 1000W RMS total at 14.4V. Will the amplifier work with a factory head unit? The SP 4.900 accepts pre-amp or speaker-level input and includes USS (Universal Speakers Simulator) for head units with speaker load detection. What is the SV 165 NEO? A 6.5-inch Hertz SPL midrange speaker rated 150W continuous and 400W peak at 4 ohms, with 97dB sensitivity and a 100Hz to 10kHz published response. Are the speakers weather resistant? Hertz SPL Show NEO speakers use water-repellent pressed-paper cones with water, humidity and anti-UV treatment, and the SP 4.900 uses an IP55-rated aluminum chassis.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz SPL Show SP 1.900 1000W Mono Motorcycle Amplifier
Vendor:HertzHertz SPL Show SP 1.900 1000W Mono Motorcycle Amplifier The Hertz SP 1.900 puts 1000 watts RMS on a single channel in a compact, fanless, IP55 sealed aluminum chassis. It is a dedicated bass amplifier: low-pass from 50Hz to 250Hz, a 25Hz subsonic filter, bass boost and phase control, with sealed power, input and speaker connections. Hertz Motorcycle AudioMotorcycle AmplifiersMotorcycle Subwoofers Hertz Mono Motorcycle Amplifier1000W RMS Mono Power, Stable to 1 Ohm Built for subwoofers and dedicated bass in bagger, powersports and boat systems. 1000W RMS x 1 at 2Ω and at 1Ω (14.4V) 600W RMS x 1 at 4Ω (14.4V) IP55 sealed, fanless aluminum chassis Start a Build ConsultationCall 864-334-6131 Key Product Details Product Hertz SPL Show SP 1.900 1000W Mono Motorcycle Amplifier Amplifier Type Single-channel (mono) Class D amplifier, Hertz ADC output stage Best For Subwoofers and dedicated bass in bagger, powersports and marine audio systems System Goal Real bass output in an open-air system without a large amplifier Speaker Support 4Ω, 2Ω or 1Ω loads (1Ω minimum) Inputs Pre-in (RCA) and speaker-level inputs, with USS for head units that need a speaker load Install Focus Compact sealed chassis for tight motorcycle, powersports and boat mounting locations Always verify subwoofer impedance, wiring, fuse size, amplifier placement, gain setting and charging system capacity before ordering or installing this amplifier.Bass Power That Survives Outside Subwoofers on a bike or boat need real current and an amplifier that will not choke on water and road grime. The SP 1.900 runs a fanless aluminum chassis rated IP55 with sealed power, input and speaker connections, so there is no fan pulling dirt across the board. With 1000 watts RMS available at 2 ohms and 1 ohm, a subsonic filter at 25Hz and an adjustable low pass, it gives you the control to keep a sub clean and loud instead of just loud.Power and Performance Specifications RMS Power @ 4Ω 600 watts x 1 at 14.4V, 1% THD RMS Power @ 2Ω 1000 watts x 1 at 14.4V, 1% THD RMS Power @ 1Ω 1000 watts x 1 at 14.4V, 1% THD Total RMS Power 1000 watts Minimum Load 1Ω Amplifier Class D (Hertz ADC), up to 87% efficiency THD Under 0.1% (100Hz, 4Ω, 70% rated power) Bandwidth 10Hz–500Hz Signal-to-Noise Ratio 95 dBA Damping Factor Over 300 Controls, Inputs and Electrical Low-Pass Filter 50Hz–250Hz adjustable Subsonic Filter 25Hz, 24 dB/octave Bass Boost 0–8 dB (low pass on only) Phase 0–180° Pre-In Sensitivity 0.6–6 VRMS Speaker-In Sensitivity 2.2–22 VRMS Turn-On Remote in (6–15 VDC) or ART auto turn-on from speaker-level input (3.5–7 VDC, selectable) Power Supply Voltage 11–15 VDC (operating 6–16 VDC) Current Draw 50A at 14.4V, 2Ω, max musical power; idle 1.1A Protection IP55 Operating Temperature 0°C to 55°C Dimensions 211.6 x 130 x 49 mm (8.3 x 5.1 x 1.9 in) Weight 2.15 kg Recommended System Planning The SP 1.900 only performs if the power side is right. Plan OFC power and ground wire sized for a 50A draw, a fuse at the battery, a solid ground, a clean signal feed and a subwoofer load that matches the amp (4Ω, 2Ω or 1Ω). Set the low pass, subsonic and gain with the sub installed, not on the bench. If you are unsure how the SP 1.900 fits your Road Glide, Street Glide, Road King, Indian, boat or custom build, contact Garage Bagger Stereo before ordering.What to Pair With the SP 1.900 Parts that get a mono amp wired and tuned correctly. Hertz MPS 250 S2 10" Shallow Subwoofer Hertz Mille PRO 10-inch 2-ohm shallow sub. 1998-Present Harley Power Kits Power and ground wiring for amplifier installs. Motorcycle Amplifier Installation Parts Fusing, distribution, RCA and mounting parts. Motorcycle DSP Crossover and tuning control for the whole system. Related Hertz & Motorcycle Audio Paths Match the SP 1.900 with the right sub, wiring and tuning parts. Shop Hertz motorcycle audio amplifiers, speakers and DSP Shop motorcycle amplifiers for Harley bagger audio systems Shop motorcycle subwoofers Shop 10-inch motorcycle subwoofers Shop motorcycle amplifier installation parts Best Use for the SP 1.900 Choose it to power a subwoofer or dedicated bass section where space is tight and the amp will see weather, dirt and heat. Designed Around Real Motorcycle Audio Wind noise, road speed, limited mounting space and electrical load all matter on a bike. This amp belongs in systems where the sub, wiring, fusing and tuning are planned together. Hertz SP 1.900 FAQ How much power does the SP 1.900 make? Hertz rates it at 600 watts RMS x 1 at 4Ω, 1000 watts RMS x 1 at 2Ω and 1000 watts RMS x 1 at 1Ω, at 14.4V and 1% THD. What speaker loads can it run? It is stable down to 1Ω, so it can drive 4Ω, 2Ω or 1Ω subwoofer loads. Is the SP 1.900 plug and play? No. It is a mono bass amplifier that needs its own power, ground, fuse, signal and speaker wiring. How much current does it draw? Hertz lists 50A at 14.4V into 2Ω at max musical power and 1.1A at idle. Size the power wire, fuse and charging system for that. What filters does it have? An adjustable 50Hz–250Hz low pass, a 25Hz subsonic filter at 24 dB/octave, 0–8 dB bass boost (low pass on only) and 0–180° phase. Does Garage Bagger Stereo install the SP 1.900? Garage Bagger Stereo installs motorcycle audio at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz HSP1-13 Front Fairing Speaker Kit with Amp for 1998-2013 Harley
Vendor:HertzHertz HSP1-13 Front Fairing Speaker Kit with Amp for 1998-2013 Harley The Hertz HSP1-13 is a plug and play front speaker kit for 1998-2013 Harley-Davidson touring bikes. It pairs the SP 4.900 four-channel amplifier with a set of SX 165 NEO 6.5-inch coaxial speakers for the fairing. The HTHP13 T-Power harness, HD13AP amplifier mounting bracket and both Street Glide and Road Glide speaker grilles are included. Shop HertzHarley Plug and Play Kits1998-2013 Harley Audio 1998-2013 HARLEY-DAVIDSON FRONT SPEAKER SOUND PACKFront Fairing Sound Pack An amplified front speaker upgrade for 1998-2013 Harley-Davidson fairings. Hertz SP 4.900 four-channel amplifier Two SX 165 NEO 6.5-inch coaxials HTHP13 harness, HD13AP bracket, SG and RG grilles Start a Build ConsultationCall 864-334-6131 Amplifier mounting: The included HD13AP is listed as an amplifier mounting plate and bracket mount for Road Glide. On a Street Glide or other batwing bike, confirm the amplifier location with us before ordering. Key Product Details Kit Model / SKU HSP1-13 Brand Hertz (Elettromedia) Vehicle Application 1998-2013 Harley-Davidson touring models Amplifier Hertz SP 4.900 four-channel Fairing Speakers Hertz SX 165 NEO 6.5-inch coaxials (pair) Speaker Impedance 4Ω per speaker Power Harness HTHP13 T-Power harness Amplifier Mount HD13AP amplifier mounting bracket Front Grilles Street Glide and Road Glide speaker grilles Speakers in Kit Two Listed for 1998-2013 Harley-Davidson touring models with a front fairing. Verify your year, fairing style and factory radio before ordering.Hertz Fairing Audio for 1998-2013 Harley-Davidson The HSP1-13 is the front-only Hertz sound pack for 1998-2013 bikes. It replaces the fairing speakers with SX 165 NEO coaxials and adds an SP 4.900 amplifier, using the HTHP13 T-Power harness supplied in the kit. Because the SP 4.900 is a four-channel amplifier, this kit leaves room to grow. Adding rear speakers later is a conversation worth having with us before you buy. SP 4.900 Amplifier: Four D-class channels in an IP55 aluminum chassis, rated 160W RMS × 4 at 4Ω. SX 165 NEO Coaxials: Two-way 6.5-inch coaxials, 4Ω, 100W continuous / 200W peak each, 96.5dB sensitivity. Factory Radio Signal: Pre-amp or speaker-level input with USS for head units that check for a speaker load.What's Included and Specifications Hertz SP 4.900 Four-Channel Amplifier IP55 D-class amplifier rated 160W RMS × 4 at 4Ω, 250W RMS × 4 at 2Ω or 500W RMS × 2 bridged at 4Ω, with USS for factory head units that use speaker load detection. Hertz SX 165 NEO Coaxial Speakers 6.5-inch two-way SPL coaxials, 4Ω, 100W continuous / 200W peak, 96.5dB sensitivity, neodymium motors and water-repellent, anti-UV cones. HTHP13 T-Power Harness 1998-2013 T-Power harness supplied with the kit. HD13AP Amplifier Mounting Bracket Amplifier mounting plate and bracket mount (listed for Road Glide). Street Glide and Road Glide Speaker Grilles Both front speaker grille styles are included in the kit. Kit contents are listed as published on the Elettromedia (Hertz) 2026 Hertz Moto price sheet. Component specifications are from Hertz product pages. SP 4.900 Amplifier Specifications Amplifier Model Hertz SPL Show SP 4.900 Amplifier Type Four-channel D-class amplifier (Hertz ADC output stage) Output at 4Ω 160W RMS × 4 channels at 14.4V Output at 2Ω 250W RMS × 4 channels at 14.4V Bridged Output 500W RMS × 2 channels at 4Ω, 14.4V Total RMS Power 1000W Minimum Load 2Ω in 4-channel mode / 4Ω bridged Chassis Protection IP55 aluminum chassis, no cooling fan, sealed power, input and speaker connections Inputs Pre-in (0.6–6 V RMS) and speaker-level in (2.2–22 V RMS) Speaker Load Detection USS (Universal Speakers Simulator) for head units with speaker load detection Crossovers Ch 1-2 high-pass / low-pass 50Hz–5kHz, Ch 3-4 high-pass 50Hz–5kHz, 12dB/octave Bass Boost 0–8dB (low-pass on only) Bandwidth 10Hz–35kHz (−3dB) Signal-to-Noise Ratio 105 dBA THD 0.02% at 100Hz, 4Ω, 70% rated power Damping Factor 200 Power Supply 11–15 VDC nominal / 6–16 VDC operating Dimensions 211.6 × 130 × 49 mm (8.3 × 5.1 × 1.9 in) Weight 2.15 kg SX 165 NEO Fairing Speakers Speaker Model Hertz SPL Show SX 165 NEO Speaker Type 6.5-inch (165mm) two-way SPL coaxial Quantity One pair Impedance 4Ω Power Handling 100W continuous / 200W peak per speaker Sensitivity 96.5dB Frequency Response 100Hz–20kHz Woofer Voice Coil 38mm Tweeter 35mm (1.4 in) neodymium PEI dome with resettable protection circuit Magnets N38H neodymium Cone Water-repellent pressed paper with anti-UV treatment Terminals Double Faston terminals Recommended System Planning The HTHP13 T-Power harness is included and the amplifier mounts on the HD13AP bracket. Both Street Glide and Road Glide front grilles are in the box. We install Hertz kits at our Taylors, SC shop, and we can help you plan a DIY install. Gain setting matters: At 4Ω the SP 4.900 is rated for 160W RMS per channel, more than the SX 165 NEO's 100W continuous rating. Set the gains so the front speakers stay inside their continuous rating.What to Pair With the HSP1-13 Everything to run the kit is in the box. These parts help if you plan to grow the system later. Hertz SP 4.900 Amplifier The IP55 four-channel amplifier used in every Hertz sound pack, sold on its own. Hertz SX 165 NEO 6.5-inch Coaxials The fairing coaxial pair from this kit, sold separately as a replacement or spare pair. Hertz SX 690 NEO.1 6x9 Speakers The 6x9 three-way pair Hertz uses in its HSP3-13 and HD13H saddlebag kits, for a later rear upgrade. Motorcycle Audio Batteries Battery upgrades for builds that run the amplifier hard. Ask us whether your charging system needs one. Related Hertz & Motorcycle Audio Paths Build around the right parts for a 1998-2013 fairing. Shop Hertz Motorcycle Audio 1998-2013 Harley-Davidson Audio Harley Plug and Play Kits Motorcycle 6.5-inch Speakers Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Hertz Fairing Kit for 2014-2023 Harley Best Use for the HSP1-13 A first amplified upgrade on a 1998-2013 Street Glide or Road Glide, keeping the factory radio. Room to Grow The SP 4.900 is a four-channel amplifier. Talk to us about how the kit is wired before planning rear speakers. Hertz HSP1-13 FAQ What comes in the HSP1-13 kit? An SP 4.900 amplifier, SX 165 NEO coaxial speakers, the HTHP13 T-Power harness, the HD13AP amplifier mounting bracket, and both Street Glide and Road Glide speaker grilles. Which years does it fit? Hertz lists the HSP1-13 for 1998-2013 Harley-Davidson motorcycles. Confirm your exact bike with us before ordering. How many speakers are included? Two SX 165 NEO 6.5-inch coaxial speakers for the front fairing. How much power does the SP 4.900 make? Hertz rates the SP 4.900 at 160W RMS × 4 at 4Ω, 250W RMS × 4 at 2Ω and 500W RMS × 2 bridged at 4Ω, 1000W RMS total at 14.4V. Will the amplifier work with a factory head unit? The SP 4.900 accepts pre-amp or speaker-level input and includes USS (Universal Speakers Simulator) for head units with speaker load detection. Does it include saddlebag speakers? No. For front and saddlebag speakers in one kit, look at the HSP3-13. Are the speakers weather resistant? Hertz SPL Show NEO speakers use water-repellent pressed-paper cones with water, humidity and anti-UV treatment, and the SP 4.900 uses an IP55-rated aluminum chassis.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale -
SaleHertz SPL Show SP 4.500 600W 4-Channel Motorcycle Amplifier
Vendor:HertzHertz SPL Show SP 4.500 600W 4-Channel Motorcycle Amplifier The Hertz SP 4.500 is a sealed 4-channel amplifier for riders who want real power on fairing and saddlebag speakers without a big box. It accepts RCA or speaker-level input, has USS for head units that need to see a speaker load, and runs 4, 3 or 2 channel configurations. Hertz Motorcycle AudioMotorcycle AmplifiersMotorcycle Speakers Hertz 4-Channel Motorcycle Amplifier600W RMS Total in a Sealed IP55 Chassis Built for fairing and lid speakers that need clean power from a small, sealed amplifier. 150W RMS x 4 at 2Ω (14.4V) 300W RMS x 2 bridged at 4Ω (14.4V) HP / LP / Full crossovers, 50Hz–5kHz Start a Build ConsultationCall 864-334-6131 Key Product Details Product Hertz SPL Show SP 4.500 600W 4-Channel Motorcycle Amplifier Amplifier Type 4-channel Class D amplifier, Hertz ADC output stage Best For Fairing speakers, saddlebag lid speakers and midrange pairs in bagger, powersports and marine systems System Goal More clean power on four speakers from a small, sealed amplifier Speaker Support 2Ω minimum in 4-channel mode; 4Ω minimum bridged Inputs Pre-in (RCA) and speaker-level inputs, USS load simulation Install Focus Compact sealed chassis for tight bagger, powersports and boat mounting locations Always verify speaker impedance, wiring layout, fuse size, amplifier placement, gain structure and charging system capacity before ordering or installing this amplifier.Four Channels Built for Outside Fairing and lid speakers on a bagger have to fight wind and engine noise. The SP 4.500 gives you 150 watts RMS per channel at 2 ohms in a chassis rated IP55, with no cooling fan and sealed power, input and speaker connections. Each channel pair gets its own crossover (full, high pass or low pass, 50Hz to 5kHz) so you can high-pass the fairing speakers and set the rear pair independently, or run it in 3-channel or bridged 2-channel modes.Power and Performance Specifications RMS Power @ 4Ω 90 watts x 4 at 14.4V, 1% THD RMS Power @ 2Ω 150 watts x 4 at 14.4V, 1% THD Bridged Power @ 4Ω 300 watts x 2 at 14.4V, 1% THD 3-Channel @ 4Ω 80 watts x 2 (4Ω) + 330 watts x 1 (4Ω) 3-Channel @ 2Ω 145 watts x 2 (2Ω) + 300 watts x 1 (4Ω) Total RMS Power 600 watts Amplifier Class D (Hertz ADC), up to 87% efficiency THD Under 0.02% (100Hz, 4Ω, 70% rated power) Bandwidth 10Hz–35kHz Signal-to-Noise Ratio 100 dBA Damping Factor Over 150 Controls, Inputs and Electrical Crossover Ch 1-2 Full / High Pass / Low Pass, 50Hz–5kHz, 12 dB/octave Crossover Ch 3-4 Full / High Pass / Low Pass, 50Hz–5kHz, 12 dB/octave Bass Boost 45Hz, 0–8 dB on outputs 3-4 (low pass on only) Pre-In Sensitivity 0.6–6 VRMS Speaker-In Sensitivity 2.2–22 VRMS Turn-On Remote in (6–15 VDC) or ART auto turn-on from speaker-level input (3.5–7 VDC, selectable) Power Supply Voltage 11–15 VDC (operating 6–16 VDC) Current Draw 27A at 14.4V, 2Ω, max musical power; idle 0.9A Protection IP55 Operating Temperature 0°C to 55°C Dimensions 192.7 x 130 x 49 mm (7.58 x 5.1 x 1.9 in) Weight 1.9 kg Recommended System Planning Match the SP 4.500 to the speakers first: 2Ω or 4Ω speakers per channel in 4-channel mode, 4Ω when bridged. Run OFC power and ground sized for a 27A draw, fuse at the battery, feed it a clean RCA or speaker-level signal and set the gains with the bike running. If you are unsure whether the SP 4.500 is the right amplifier for your Road Glide, Street Glide, Road King, Indian or custom bagger, contact Garage Bagger Stereo before ordering.What to Pair With the SP 4.500 Speakers and parts that get the most from this amp. Hertz SPL Show SX 165 NEO Coaxial Hertz 6.5-inch NEO coaxial for fairing and Tour-Pak locations. Hertz SPL Show SX 690 H 6x9 3-Way (Pair) Hertz 6x9 for saddlebag lids. Hertz S8 DSP Hertz DSP for time alignment and EQ. Motorcycle Amplifier Installation Parts Power, ground, fusing and RCA parts. Related Hertz & Motorcycle Audio Paths Build the system around the right amplifier, speakers, DSP and wiring. Shop Hertz motorcycle audio amplifiers, speakers and DSP Shop motorcycle amplifiers for Harley bagger audio systems Compare the Hertz SP 4.900 4-channel motorcycle amplifier Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle amplifier installation parts Best Use for the SP 4.500 Choose it to power four fairing and lid speakers, or a speaker pair plus a bridged channel, when space is tight and the amp will see weather. Designed Around Real Motorcycle Audio Wind noise, road speed, speaker placement, electrical load and limited mounting space all matter. This amp belongs in systems where the speakers, wiring, fusing and tuning are matched. Hertz SP 4.500 FAQ How much power does the SP 4.500 produce? At 14.4V and 1% THD Hertz rates it at 90 watts RMS x 4 at 4Ω, 150 watts RMS x 4 at 2Ω, or 300 watts RMS x 2 bridged at 4Ω, for 600 watts RMS total. Can it run in 3-channel mode? Yes. Hertz rates 80 watts x 2 (4Ω) plus 330 watts x 1 (4Ω), or 145 watts x 2 (2Ω) plus 300 watts x 1 (4Ω). Will it work with a factory radio? It has speaker-level inputs (2.2–22 VRMS), USS for head units that need a speaker load, and ART auto turn-on from the speaker signal. How much current does it draw? Hertz lists 27A at 14.4V into 2Ω at max musical power and 0.9A at idle. Is it weatherproof? The aluminum chassis is rated IP55 with sealed power, input and speaker connections and no cooling fan. Does Garage Bagger Stereo install the SP 4.500? Garage Bagger Stereo installs motorcycle audio at our Taylors, SC shop and can help you plan a DIY install. Start a Build Consultation or call 864-334-6131.Need Help Choosing? Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order. Call 864-334-6131Start a Build ConsultationSale
About Hertz Audio
Hertz takes its name from the unit of frequency, the number of cycles per second. From the name to the product characteristics, Hertz describes itself as a performance-oriented company by philosophy and design.
Each new Hertz project starts from the needs of fans and enthusiasts and is developed to connect them to the emotional power of music, combining premium sound, living tradition, innovation and high quality in a complete line of products.
Hertz Motorcycle Speakers for Harley-Davidson Touring
Coaxial speakers
The SX 165 NEO 6.5 inch, SX 200 NEO 8 inch and SX 690 NEO 6x9 coaxials replace a speaker and tweeter with one driver, and the SX 690 H adds a 3-way option for the lids. Compare brands in motorcycle coaxial speakers.
Midrange and tweeter
Add a dedicated midrange with the SV 165 NEO, SV 200 NEO or SV 200L, and top it with the ST 25K NEO tweeter for projection at highway speed.
Amplifier and DSP
Power the system with the Hertz SP4.900 Class D amplifier and tune it with the S8 DSP. Browse more in motorcycle amplifiers and plug-and-play DSP.
Mille PRO subwoofer
The Hertz MPS 250 S2 Mille PRO 10 inch shallow subwoofer adds low end where depth is limited. See motorcycle subwoofers to compare.
Hertz Plug-and-Play and Saddlebag Lid Kits for Harley
Hertz offers a plug-and-play fairing kit for 2014–2023 Harley-Davidson Touring, the HSP2 and HSP3 four-speaker kits, and the HD14H and HD24H 6x9 saddlebag speaker kits for 2014-and-newer and 2024-and-newer models. Confirm the model year on each listing, and see our Harley plug-and-play kits for other brands.
Not sure which Hertz kit fits your bike? Start a build consultation or call 864-334-6131.
Why Buy Hertz from Garage Bagger Stereo?
Harley-Davidson audio specialist
Garage Bagger Stereo is a Harley-Davidson audio specialist in Taylors, SC. We sell Hertz speakers, amplification and DSP together with the install parts they need.
Parts matched to your bike
We help you choose a combination that fits your bike and radio.
Hertz Motorcycle Audio FAQ
Which Hertz saddlebag lid kit fits my Harley?
Hertz makes the HD14H for 2014-2023 Touring saddlebag lids and the HD24H for 2024-present Touring base and CVO ST models. Both are cut-in kits for your factory lids. Hertz includes a cut-out template, 6x9 speaker mounts, speaker grilles, mounting hardware and a plug-and-play speaker harness. Speakers are not included; Hertz designed the HD14H around its 690 NEO 6x9.
What is the difference between Hertz SV and SX speakers?
SX models are coaxials with a built-in tweeter, so they drop into factory locations and play full range. SV models are SPL midrange drivers. Hertz rates the SV 200 NEO 8-inch at 200 watts continuous, 4 ohms, 100 Hz to 8 kHz, so pair it with a horn such as the ST 25K and use a crossover. Hertz states the SV 200 NEO terminals and mounting holes fit Harley-Davidson bikes.
Which Hertz plug-and-play kits fit 2014-2023 Harleys?
Hertz offers three here for 2014-2023 Touring bikes: a plug-and-play fairing kit, the HSP2 4-speaker kit for bikes with a factory Tour-Pak, and the HSP3 4-speaker kit that adds 6x9 saddlebag lid speakers. The HSP3 runs on the Hertz SP 4.900 4-channel amplifier. For 2024-present bikes, start with the HD24H lid kit and our 2024-present plug-and-play kits.
Need Help Choosing Hertz Motorcycle Audio?
Tell us your bike, year and goals and a Garage Bagger Stereo specialist will help you pick the right parts and plan the install.