Browse Collections
-
SaleCicada Audio HDTSLINKAR-B 2014–2023 Harley Factory Radio T-Harness
Vendor:Cicada Audio2014–2023 HARLEY FACTORY RADIO INTEGRATION Cicada Audio HDTSLINKAR-B 2014–2023 Harley Factory Radio T-HarnessNo stock radio Flashing Required! Integrate a compatible four-channel aftermarket amplifier with the factory radio in a 2014–2023 Harley-Davidson Road Glide or Street Glide without cutting or splicing the motorcycle’s factory wiring. Removable RCA connectors support conventional aftermarket amplifiers, while the built-in four-position Molex connector provides a cleaner direct connection to Cicada Audio amplifiers. View Connection Options Verify Harley Fitment One Harness for Complete Audio Integration Fits compatible 2014–2023 Harley Touring motorcycles Road Glide and Street Glide applications Factory-amplified and non-amplified systems Basic through CVO Ultra factory audio systems Designed for four-channel amplifier integration Removable RCA output connectors Four-position Cicada amplifier Molex connector Balanced factory-radio audio signal Maestro AR ready Retains supported factory fade operation Retains supported handlebar audio controls No factory-wire cutting or splicing Updated Replacement for the Cicada HDTSLINKv2 The HDTSLINKAR-B replaces the previous HDTSLINK and HDTSLINKv2 factory-radio harness with a more flexible amplifier connection system. The updated removable RCA connections allow the harness to integrate with compatible four-channel amplifiers using conventional low-level RCA inputs. Installers using Cicada Audio amplifiers can instead use the built-in four-position Molex connector for a cleaner direct connection. This dual-connection design removes the old limitation that prevented the previous harness from connecting directly to certain amplifier platforms. Correct fitment: This updated harness is for 2014–2023 Harley-Davidson Road Glide and Street Glide motorcycles. It is not the correct A2B interface for 2023.5+ CVO or 2024+ Touring motorcycles. Harley-Davidson Fitment 2014–2023 Road Glide Supports compatible Road Glide factory-radio systems within the 2014–2023 Harley Touring platform. 2014–2023 Street Glide Supports compatible Street Glide factory-radio systems within the 2014–2023 Harley Touring platform. CVO and Ultra Systems Designed to support compatible basic, factory-amplified, non-amplified and CVO Ultra stereo configurations. Confirm the complete audio configuration: Verify the motorcycle year, exact model, factory radio, factory amplifier, fairing-speaker locations, rear-speaker locations and existing audio modifications before ordering. Two Amplifier Connection Options Removable RCA Outputs Use the removable RCA connectors to feed a compatible four-channel aftermarket amplifier with traditional low-level RCA inputs. Cicada Molex Connection Use the built-in four-position Molex connector for direct plug-in integration with compatible Cicada Audio amplifiers. Provides front and rear four-channel audio integration. Supports compatible fairing and rear-speaker configurations. Reduces unnecessary adapter harnesses and connection points. Maintains a cleaner factory-style installation. Allows the same primary harness to support multiple amplifier platforms. Amplifier input verification: Confirm the selected amplifier accepts the available RCA or Cicada Molex connection before beginning installation. Factory Radio and OEM Control Retention The HDTSLINKAR-B is designed to provide a clean audio signal from the original Harley-Davidson radio while avoiding unnecessary changes to the motorcycle’s factory CAN-bus wiring. Factory Fade Support Retains supported front-to-rear fade operation when the complete audio system is wired and configured correctly. Handlebar Controls Maintains supported factory handlebar audio adjustments through the original radio system. Factory EQ Integration Supports factory EQ operation and Maestro AR integration for systems requiring radio-EQ correction or flashing. Maestro AR Integration Cicada identifies the HDTSLINKAR-B as Maestro AR ready for compatible systems using ADS Maestro AR to flatten or flash factory radio EQ settings. Cicada’s current package listing states that Maestro and AR are included. Confirm the exact Maestro hardware and accessories contained in current inventory when receiving and fulfilling the product. Programming may still be required: Maestro-supported radio flashing, EQ correction and module configuration must be completed according to the requirements of the motorcycle, radio and final audio system. Multiple Harness Functions in One Assembly The HDTSLINKAR-B combines the functions that previously required several separate adapters, power taps and speaker harnesses. Front Signal Integration Provides the required front factory-radio signal path for a compatible aftermarket amplifier. Rear Signal Integration Supports rear audio signal routing for compatible saddlebag, lid or Tour-Pak speaker systems. Accessory Power Connection Replaces the need for a separate stealth accessory power-tap harness in supported installations. Rear Speaker Wiring Provides the rear speaker wiring path required for compatible bag or Tour-Pak audio configurations. Battery and Ground Tap Consolidates supported battery and ground integration functions within the primary installation package. Fairing Speaker Pod Adapters Replaces separate fairing-speaker pod plug adapters in supported factory speaker configurations. Recommended Audio-System Applications The HDTSLINKAR-B provides its most complete integration benefits in four-channel Harley Touring audio systems using both front fairing speakers and rear speakers. Fairing and Saddlebag Speakers Supports systems using front fairing speakers and compatible saddlebag-lid speakers. Fairing and Tour-Pak Speakers Supports compatible Ultra systems using front fairing and rear Tour-Pak speaker locations. Four-Channel Amplifier Systems Designed around the signal and speaker-routing requirements of a conventional four-channel amplifier installation. Installation and Ordering Notes Disconnect the motorcycle battery before beginning installation. Confirm 2014–2023 Road Glide or Street Glide fitment. Identify whether the motorcycle is factory amplified. Confirm all factory and aftermarket speaker locations. Verify the amplifier uses compatible RCA or Cicada Molex inputs. Route harness wiring away from sharp edges, heat and steering movement. Secure all unused connectors against vibration and moisture. Confirm left, right, front and rear channel assignments before final assembly. Set amplifier gain and crossover controls after signal integration. Test fade, balance and handlebar controls before reinstalling the fairing. Not for current A2B motorcycles: A compatible A2B interface is required for 2023.5+ CVO and 2024+ Harley Touring factory audio systems. Product Specifications Manufacturer Cicada Audio Current Manufacturer SKU HDTSLINKAR-B Replaces HDTSLINK and HDTSLINKv2 Product Type Factory-radio amplifier integration T-harness Vehicle Platform 2014–2023 Harley-Davidson Touring Primary Models Road Glide and Street Glide Factory Audio Systems Factory-amplified and non-amplified systems Aftermarket Amplifier Channels Four-channel integration Conventional Amplifier Connection Removable RCA outputs Cicada Amplifier Connection Built-in four-position Molex connector Maestro AR Support Maestro AR ready Factory-Wire Cutting Required No Shopify Variants None Related Motorcycle Audio Categories Amplifier Integration Motorcycle Amplifier Parts Motorcycle Amplifiers Motorcycle DSP and Signal Integration Complete the Harley System Motorcycle Speakers Cicada Audio Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada HDTSLINKAR-B FAQ What motorcycles does the HDTSLINKAR-B fit? It is designed for compatible 2014–2023 Harley-Davidson Road Glide and Street Glide factory-radio systems. Does it fit 2024 and newer Harley Touring motorcycles? No. The newest Harley Touring motorcycles use a different A2B factory-audio architecture and require an appropriate A2B interface. Does it work with factory-amplified motorcycles? Yes. Cicada designed the harness to support compatible factory-amplified and non-amplified 2014–2023 Harley systems. Can it connect to a non-Cicada amplifier? Yes. The removable RCA connectors support compatible four-channel aftermarket amplifiers using conventional RCA inputs. How does it connect to Cicada amplifiers? A built-in four-position Molex connector provides a direct plug-in path for compatible Cicada Audio amplifiers. Does it retain the factory fade control? It supports factory front-to-rear fade operation when the complete system is wired and configured correctly. Is it Maestro AR ready? Yes. Cicada identifies the HDTSLINKAR-B as Maestro AR ready for compatible factory-radio EQ flashing or correction. Does the installation require cutting factory wiring? No. The harness is designed as a plug-and-play integration solution without cutting or splicing the motorcycle’s factory wiring. Is an amplifier included? No. The aftermarket amplifier, power wiring, amplifier rack and additional system components are selected separately. Need Help Integrating a 2014–2023 Harley Factory Radio? Garage Bagger Stereo can help verify amplifier matching, mounting, power and speaker wiring, factory-radio signal integration and the correct RCA or Cicada Molex connection before installation. Installation Services Request a Custom BuildSale -
2014-2023 Harley-Davidson 2-Speaker Plug and Play Audio System | DS18
Vendor:DS18 Motorcycle Audio2014–2023 ROAD GLIDE OR STREET GLIDE 2014–2023 Harley-Davidson 2-Speaker Plug-and-Play Audio System | DS18 Upgrade a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide with a complete two-speaker audio system built around a DS18 ION1600.4D amplifier, two high-output 6.5-inch hybrid speakers, factory-radio integration and the primary power, mounting and installation components required for the selected motorcycle. Select Road Glide or Street Glide before ordering so the system can be supplied with the correct fairing-specific amplifier mounting configuration. Two amplifier channels power the included speakers, while two channels remain available for a properly matched future rear-speaker upgrade. Check Motorcycle Fitment See Everything Included Complete Two-Speaker Audio System Road Glide and Street Glide options Compatible 2014–2023 Harley-Davidson Touring platform DS18 ION1600.4D four-channel Class-D amplifier Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers 4-ohm nominal impedance per speaker 150 watts RMS per included speaker Built-in 1-inch titanium compression drivers DS18 factory-radio plug-and-play harness 4-AWG amplifier power wiring Bike-specific amplifier mounting solution Two amplifier channels available for future expansion Complete 2-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package combines the amplifier, front fairing speakers, factory-radio signal interface, power wiring and motorcycle-specific mounting components required to build a complete two-speaker audio system in a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide. The included DS18 PRO-HY6.4MSL speakers combine a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. The hybrid design delivers the midrange projection and high-frequency output needed to overcome motorcycle, road and wind noise. The DS18 ION1600.4D provides four channels of full-range Class-D power. Two channels operate the included fairing speakers. The remaining two channels can support a compatible rear-speaker pair after the correct speakers, wiring, mounting hardware and amplifier setup are added. Plug-and-play clarification: The included RY-HARNESS.HD provides a plug-and-play connection to compatible factory Harley-Davidson radio wiring. The complete installation still requires amplifier power wiring, speaker mounting, secure amplifier mounting and proper gain and crossover setup. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible 2014–2023 sharknose-fairing motorcycle. This option must include the amplifier rack and front-speaker installation components configured for the Road Glide fairing. 2014–2023 Road Glide fairing configuration Road Glide-specific amplifier mounting solution Two front fairing speakers Factory-radio integration harness Street Glide Option Select Street Glide for a compatible 2014–2023 batwing-fairing motorcycle. This option must include the amplifier rack and front-speaker installation components configured for the Street Glide fairing. 2014–2023 Street Glide fairing configuration Street Glide-specific amplifier mounting solution Two front fairing speakers Factory-radio integration harness Confirm the motorcycle before ordering: Verify the model year, exact trim, Road Glide or Street Glide fairing, factory radio, factory amplifier configuration and any existing audio modifications. Everything Included in the Audio System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms and 800 watts RMS × 2 bridged at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers One pair of 6.5-inch shallow hybrid speakers with 4-ohm impedance, 150-watt RMS power handling and built-in 1-inch titanium compression drivers. DS18 RY-HARNESS.HD A factory-radio plug-and-play amplifier harness with four-channel RCA pre-output, oxygen-free copper wiring and water-resistant construction. NVS 4-AWG Amplifier Power Kit Heavy-gauge amplifier power and ground wiring with quick-disconnect hardware for cleaner installation, saddlebag removal and future servicing. Front-Speaker Installation Components Fairing-specific speaker spacers, mounting hardware and installation components are supplied according to the selected Road Glide or Street Glide configuration. Bike-Specific Amplifier Rack The selected motorcycle option includes a Road Glide- or Street Glide-specific amplifier mounting solution for a secure, vibration-resistant installation. Two-speaker system: Rear speakers, saddlebag speaker adapters, speaker lids, rear-speaker wiring and rear grilles are not included unless specifically added to the order. Speaker Impedance and Amplifier Channel Configuration Front-Left Speaker One PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated ION1600.4D amplifier channel. Front-Right Speaker The second PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Two Available Channels Two amplifier channels remain available for compatible future rear speakers after the required wiring and mounting components are installed. Included Speaker Count Two speakers / one pair Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Amplifier Output at 4Ω 240W RMS per channel Front-Left Channel One PRO-HY6.4MSL speaker at 4Ω Front-Right Channel One PRO-HY6.4MSL speaker at 4Ω Loaded Amplifier Channels Two Available Amplifier Channels Two Bridging Required No Output must be limited correctly: The ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The DS18 ION1600.4D is a compact full-range Class-D amplifier that provides substantial output from a motorcycle-friendly chassis. It can power the included two-speaker system while retaining two channels for a properly designed future expansion. 240W × 4 at 4Ω Published four-channel output for compatible 4-ohm speaker systems. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm speaker systems. 800W × 2 Bridged Published bridged output into compatible 4-ohm speaker loads. Four Full-Range Channels Two channels operate the included speakers while two remain available for future rear-speaker expansion. Compact Chassis The amplifier is designed to deliver high output from a compact installation footprint. System Setup Controls Gain and crossover controls allow the output to be configured for the included hybrid speakers. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 channels Output at 2Ω 400W RMS × 4 channels Bridged Output at 4Ω 800W RMS × 2 channels Minimum Stereo Impedance 2Ω per channel Minimum Bridged Impedance 4Ω System Configuration Two channels used and two channels available Built-In DSP No Power Wiring 4-AWG amplifier wiring required DS18 PRO-HY6.4MSL 6.5-Inch Hybrid Speakers Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. The two-way hybrid design provides both midrange and upper-frequency output from the front fairing speaker locations. 150W RMS Each included speaker is rated for 150 watts RMS and 300 watts maximum. 4-Ohm Impedance Each speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Hybrid Two-Way Design A built-in titanium compression driver supplies high-frequency output without a separately mounted tweeter. Shallow Mounting Depth The 2.82-inch mounting depth supports tighter motorcycle fairing installations. IP65 Rated Water-resistant construction helps protect the speakers in motorcycle and powersports environments. 140Hz High-Pass Reference DS18 publishes 140Hz as the recommended high-pass crossover reference for this speaker. Speaker Model DS18 PRO-HY6.4MSL Quantity Included Two speakers / one pair Nominal Size 6.5 inches / 165.1mm Nominal Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Sensitivity 93dB, 1W / 1m Frequency Response 100Hz–20kHz Recommended High-Pass Crossover 140Hz Speaker Design Two-way shallow hybrid loudspeaker Midrange Voice Coil 1.5 inches / 38.6mm Compression Driver 1-inch titanium diaphragm with neodymium magnet Cone Material Water-resistant treated paper Weather Rating IP65 Mounting Cutout 5.6 inches / 142mm Mounting Depth 2.82 inches / 72mm Protective Grille Included with each speaker Check fairing clearance: Pod modification, magnet-cap clearance work, additional speaker spacing or other installation adjustments may be required depending on the exact motorcycle and factory enclosure. Factory Harley-Davidson Radio Integration The DS18 RY-HARNESS.HD connects a compatible 2014–2023 factory Harley-Davidson radio system to the aftermarket amplifier without cutting the primary factory-radio signal wiring. OEM Plug-and-Play Connection Factory-style connections simplify amplifier signal integration. Four-Channel RCA Pre-Output Four RCA channels support the included four-channel amplifier and future rear-speaker expansion. OFC Wiring Oxygen-free copper conductors and noise-rejecting RCA connections support reliable signal transfer. Designed for compatible 2014–2023 Street Glide and Road Glide models Factory-radio plug-and-play connection Four-channel RCA pre-output Oxygen-free copper wiring Water-resistant harness construction No cutting of the primary factory-radio signal wiring Factory configuration matters: Motorcycles with a factory amplifier, CVO equipment, aftermarket radio or previous audio modifications may require additional signal-integration work. Power Wiring and Amplifier Mounting 4-AWG Amplifier Wiring The included NVS power kit provides the heavy-gauge power and ground wiring needed for the amplifier, along with quick-disconnect connections for serviceability. Road Glide or Street Glide Rack Road Glide and Street Glide fairings use different amplifier mounting layouts. The selected motorcycle option determines the mounting solution supplied with the kit. Disconnect the motorcycle battery before installation. Mount the amplifier securely with adequate airflow. Install the correct fuse protection near the battery connection. Protect wiring from steering movement, sharp edges and heat. Use clean, secure power and ground connections. Verify all rack and fairing hardware before final assembly. Inspect battery and charging-system condition before high-output use. Gain and Crossover Setup Correct setup is required because the ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Connect one included speaker to each of two amplifier channels. Do not bridge the amplifier channels for the included speakers. Configure the two active channels for high-pass operation. Use 140Hz as the published speaker high-pass reference. Adjust the final crossover for the fairing and intended output level. Set amplifier gain using measured clean output. Do not use the amplifier gain control as a volume control. Reduce output immediately if distortion or mechanical noise is heard. Verify speaker polarity before closing the fairing. Professional setup recommended: Incorrect gain or crossover settings can damage the included speakers even when the system initially appears to play normally. Future Rear-Speaker Expansion The two unused amplifier channels provide a direct path for a future rear-speaker upgrade. Rear expansion must be designed around compatible speaker impedance, RMS power handling, mounting depth, wiring and crossover requirements. Already Available in the System Two unused amplifier channels Four-channel factory-radio interface Independent amplifier channel controls 4-AWG amplifier power foundation Required for Rear Expansion Compatible rear speakers Saddlebag lids, adapters or speaker pods Rear-speaker wiring and connectors Correct impedance and RMS-power matching Final crossover and gain setup Rear equipment is not included: This remains a two-speaker audio system until compatible rear speakers, mounting components and wiring are purchased and installed. Complete System Specifications System Type Two-speaker plug-and-play motorcycle audio system Motorcycle Options Road Glide or Street Glide Vehicle Application Compatible 2014–2023 Harley-Davidson models Amplifier DS18 ION1600.4D four-channel Class-D amplifier Amplifier Output at 4Ω 240W RMS × 4 channels Included Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Loaded Amplifier Channels Two channels at 4Ω each Available Amplifier Channels Two Factory-Radio Interface DS18 RY-HARNESS.HD Power Wiring NVS 4-AWG amplifier power kit with quick disconnect Amplifier Mounting Road Glide- or Street Glide-specific mounting solution Built-In DSP No Rear Speakers Included No Shopify Option Choose Road Glide or Street Glide Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, exact model, fairing style, factory radio, factory amplifier and current speaker configuration before ordering. Select Road Glide or Street Glide before adding the kit to the cart. The package includes two front fairing speakers. Each included speaker has a nominal 4-ohm impedance. Two amplifier channels remain available for future expansion. The amplifier does not include built-in DSP. Factory-amplified motorcycles may require additional integration. Speaker pod modification or additional spacing may be required. Correct gain and high-pass crossover setup are required. Rear speakers and rear mounting components are not included. Professional installation and system setup are recommended. Best For 2014–2023 Harley-Davidson Road Glide audio upgrades 2014–2023 Harley-Davidson Street Glide audio upgrades Riders retaining a compatible factory Harley-Davidson radio High-output two-speaker fairing systems Riders planning to add saddlebag speakers later Four-channel systems designed for staged expansion Professional motorcycle audio installations Related Motorcycle Audio Categories Speakers and Amplifiers Shop Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Parts Signal and Electrical Support Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Plan a Complete Motorcycle Audio System Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries DS18 2-Speaker Plug-and-Play Audio System FAQ How many speakers are included? The system includes two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers for the front fairing. What impedance are the included speakers? Each included speaker has a nominal impedance of 4 ohms. How much power can each speaker handle? Each PRO-HY6.4MSL is rated for 150 watts RMS and 300 watts maximum. How much power does the amplifier produce at 4 ohms? The ION1600.4D is rated for up to 240 watts RMS on each of its four channels at 4 ohms. Is the amplifier too powerful for the speakers? The amplifier can produce more continuous power than each speaker is rated to handle. It can be used safely when gain, high-pass crossover and maximum clean output are configured correctly. Are all four amplifier channels used? No. The supplied two-speaker system uses two channels. Two additional channels remain available for a compatible future rear-speaker pair. Does the system work with the factory Harley-Davidson radio? The included RY-HARNESS.HD is designed to integrate an aftermarket amplifier with compatible 2014–2023 Harley-Davidson factory radios. Does the factory radio wiring need to be cut? The compatible factory-radio signal connection uses a plug-and-play harness and does not require cutting the primary factory signal wiring. Does the amplifier include DSP? No. The ION1600.4D provides conventional gain and crossover controls but does not include digital signal processing. Are the speakers weather resistant? Yes. The speakers are IP65 rated and use a water-resistant treated paper cone. They should not be described as submersible. Can rear speakers be added later? Yes. The two available amplifier channels can power a properly matched rear-speaker pair after the required speakers, mounting hardware, wiring and system setup are added. Is the Road Glide amplifier rack the same as the Street Glide rack? No. Road Glide and Street Glide fairings require different amplifier mounting configurations. Select the correct motorcycle option before ordering. Will the speakers fit without modification? Fitment depends on the exact fairing enclosure and existing equipment. Speaker pod modification, additional spacing or other clearance work may be required. Are saddlebag speakers included? No. This is a two-speaker audio system. Rear speakers, saddlebag mounting components and rear-speaker wiring must be purchased separately. Need Help Matching This 2-Speaker Harley Audio System? Garage Bagger Stereo can help verify Road Glide or Street Glide fitment, speaker impedance selection, amplifier matching, fairing and amplifier mounting, power and speaker wiring, and factory-radio signal integration before installation. Installation Services Request a Custom Build -
Sale2014–2023 Harley-Davidson Plug-and-Play 2-Speaker Audio Kit | DB Drive / SounDigital
Vendor:SounDigital EVO62014–2023 HARLEY PLUG-AND-PLAY AUDIO 2014–2023 Harley-Davidson Plug-and-Play 2-Speaker Audio Kit Radio Flash Kit Included for Stock Radio Upgrade a Harley-Davidson Road Glide or Street Glide with DB Drive Euphoria XPERT 6.5-inch loudspeakers, a compact SounDigital 800.4 EVO6 amplifier and the installation components required for your selected motorcycle and radio. Choose your motorcycle model and either stock Harley radio or aftermarket radio integration directly from the product options. View Kit Options Verify Fitment Complete Two-Speaker Upgrade Fits 2014–2023 Harley Touring motorcycles Street Glide and Road Glide options Stock and aftermarket radio options DB Drive XPERT 6.5-inch speakers SounDigital 800.4 EVO6 amplifier Bike-specific Cicada amplifier rack 8-gauge OFC amplifier wiring kit 6.5-inch Harley speaker spacer rings Required speaker plug connections No dealer radio flash with stock-radio kit Choose Your Motorcycle and Radio This product uses two Shopify options. Select the correct motorcycle model first, followed by the radio currently installed in the bike. Motorcycle Model 2014–2023 Street Glide 2015–2023 Road Glide Your motorcycle selection determines which Cicada Audio amplifier rack is included. Radio Type Stock Harley Radio Aftermarket Radio Your radio selection determines which signal-integration components are included with the kit. Stock Harley Radio: No Dealer Flash Required The stock-radio version includes the Cicada Audio HDTSLINKAR-B factory radio T-harness with Maestro AR integration. This included integration package handles the factory-radio setup required for the audio upgrade. The customer does not need to take the motorcycle to a Harley-Davidson dealer to have the stock radio flashed for this kit. No dealer flash: Select the Stock Harley Radio option to receive the Cicada HDTSLINKAR-B and Maestro AR integration package. DB Drive Euphoria XPERT 6.5-Inch Loudspeakers The included EX6NCD-CFV2 loudspeakers combine a weather-resistant carbon fiber cone with a rear-mounted full-size compression driver for strong output and clear high-frequency performance on a motorcycle. High-Output Design Built around a neodymium M-ring magnet assembly and a two-inch voice coil for high-output motorcycle audio systems. Compression Driver A rear-mounted compression driver and wide-dispersion waveguide provide clear high-frequency output. Carbon Fiber Construction Weather-resistant carbon fiber cones and custom aluminum baskets are designed for demanding powersports installations. Speaker Model DB Drive Euphoria XPERT EX6NCD-CFV2 Speaker Size 6.5 inches Configuration Two-way loudspeaker with rear-mounted compression driver Power Handling 400 watts Dynamic Power 800 watts Impedance 3 ohms Sensitivity 106.1 dB at 1 watt / 1 meter Mounting Depth 3.44 inches Protective Grilles Included Quantity One matched pair SounDigital 800.4 EVO6 Amplifier The SounDigital 800.4 EVO6 delivers 800 watts RMS across four channels from a compact amplifier chassis designed for installations where mounting space is limited. 800 Watts RMS Four-channel output provides the power and system flexibility required for a high-output motorcycle audio build. Compact Footprint Its compact EVO6 chassis is well suited for installation on the included motorcycle-specific amplifier rack. Four-Channel Platform The four-channel design provides a strong foundation for the included fairing-speaker system and future system planning. What Is Included With Every Kit SounDigital Amplifier One SounDigital 800.4 EVO6 800-watt four-channel amplifier. DB Drive Speakers One pair of DB Drive Euphoria XPERT EX6NCD-CFV2 6.5-inch two-way loudspeakers. Amplifier Wiring Kit One Cicada Audio HDPG8K eight-gauge OFC amplifier installation kit. Speaker Spacer Rings One pair of DS18 6.5-inch Harley-Davidson speaker spacer rings. Bike-Specific Amplifier Rack The correct Cicada Audio amplifier rack for the selected Road Glide or Street Glide. Required Plug Connections The speaker plug connections required for the selected radio configuration. Radio-Specific Components Stock Harley Radio Includes the Cicada Audio HDTSLINKAR-B factory-radio T-harness and Maestro AR integration. No Harley-Davidson dealer radio flash is required with this configuration. Aftermarket Radio Includes the required speaker plug connections and two RCA audio cables for integration with a compatible aftermarket radio. Harley-Davidson Fitment Street Glide Select Street Glide to receive the Cicada Audio 14HDAR-SG amplifier rack. Road Glide Select Road Glide to receive the Cicada Audio 14HDAR-RG amplifier rack. Fitment range: This kit is intended for compatible 2014–2023 Street Glide and 2015–2023 Road Glide motorcycles. It is not designed for 2023.5+ CVO or 2024+ Harley Touring A2B audio systems. Installation and Ordering Notes Select the correct Road Glide or Street Glide amplifier rack. Select stock Harley radio or aftermarket radio integration. Confirm that the motorcycle is within the listed model-year range. Verify that the fairing accepts the included 6.5-inch speakers and spacer rings. Disconnect the motorcycle battery before installation. Mount the amplifier securely on the included bike-specific rack. Set amplifier gain and crossover controls after the system is installed. Test radio controls, balance and speaker operation before reinstalling the fairing. Related Motorcycle Audio Categories Shop Audio Components Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Parts Complete the System Motorcycle DSP and Signal Integration Cicada Audio Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries 2014–2023 Harley 2-Speaker Kit FAQ What motorcycles does this audio kit fit? It is offered for compatible 2014–2023 Street Glide and 2015–2023 Road Glide motorcycles. Select the correct model so the proper amplifier rack is included. Can I use this kit with the stock Harley radio? Yes. Select Stock Harley Radio to receive the Cicada Audio HDTSLINKAR-B and Maestro AR integration package. Does the stock radio need to be flashed by a Harley dealer? No. The stock-radio version includes the Cicada harness and Maestro AR integration required for this kit, so a separate dealer flash is not required. Can I use the kit with an aftermarket radio? Yes. Select Aftermarket Radio and the kit will include the appropriate plug connections and RCA cables instead of the factory-radio integration harness. What changes between Road Glide and Street Glide versions? The primary motorcycle-specific change is the amplifier rack. The Street Glide receives the 14HDAR-SG rack, while the Road Glide receives the 14HDAR-RG rack. How many speakers are included? The kit includes one pair of DB Drive Euphoria XPERT EX6NCD-CFV2 6.5-inch loudspeakers for the front fairing. Is the amplifier included? Yes. Every version includes one SounDigital 800.4 EVO6 four-channel amplifier. Does this fit 2024 and newer Harley Touring motorcycles? No. Newer A2B-equipped Harley Touring motorcycles require a different radio interface and installation package. Need Help Selecting the Correct Kit? Garage Bagger Stereo can help verify your motorcycle model, radio type, amplifier rack, speaker fitment, impedance matching, mounting and factory or aftermarket signal integration before installation. Installation Services Request a Custom BuildSale -
2023.5+ Harley-Davidson 2-Speaker Plug and Play Audio System | DS18
Vendor:DS18 Motorcycle Audio2023.5+ HARLEY-DAVIDSON PLUG-AND-PLAY AUDIO 2023.5+ Harley-Davidson 2-Speaker Plug-and-Play Audio System | DS18 Upgrade a compatible 2023.5 and newer Harley-Davidson Road Glide or Street Glide with a complete two-speaker audio system built around a DS18 four-channel amplifier, two high-output hybrid fairing speakers, NAV-TV factory A2B integration and the primary power and installation components required for the system. Select Road Glide or Street Glide before ordering so the correct motorcycle configuration can be supplied. Two amplifier channels power the included front speakers, while two channels remain available for a properly matched future rear-speaker upgrade. Check Motorcycle Fitment See Everything Included Complete Two-Speaker Audio System Road Glide and Street Glide options Designed for compatible late-model Harley A2B systems DS18 ION1600.4D four-channel Class-D amplifier 240 watts RMS × 4 channels at 4 ohms Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers 150 watts RMS per included speaker 4-ohm nominal impedance per speaker Built-in 1-inch titanium compression drivers NAV-TV ZEN-H A2B factory-radio integration 4-AWG amplifier power wiring Half-inch speaker spacers included Two amplifier channels available for expansion Complete 2-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package combines the amplifier, two front fairing speakers, factory A2B signal interface, amplifier power wiring and speaker-spacing components required to build a high-output two-speaker audio system in a compatible late-model Harley-Davidson Road Glide or Street Glide. The included DS18 PRO-HY6.4MSL speakers combine a shallow 6.5-inch midrange driver with a built-in 1-inch titanium compression driver. This hybrid design produces both midrange and high-frequency output from each fairing speaker location. The DS18 ION1600.4D supplies four full-range amplifier channels. Two channels operate the included front speakers. The remaining channels can support a properly matched rear-speaker pair after the required speakers, wiring, mounting components and amplifier setup are added. Plug-and-play clarification: The NAV-TV interface provides plug-and-play factory A2B signal integration. The complete installation still requires amplifier power wiring, speaker mounting, proper cable routing and measured gain and crossover setup. Road Glide and Street Glide Fitment Road Glide Option Select Road Glide for a compatible late-model sharknose-fairing motorcycle using the factory Harley-Davidson A2B audio platform. Road Glide fairing configuration Two front fairing speakers Half-inch speaker spacers NAV-TV A2B integration Street Glide Option Select Street Glide for a compatible late-model batwing-fairing motorcycle using the factory Harley-Davidson A2B audio platform. Street Glide fairing configuration Two front fairing speakers Half-inch speaker spacers NAV-TV A2B integration Exact model verification required: Confirm the motorcycle year, model, trim, factory radio, factory amplifier, A2B configuration and existing audio equipment before ordering. Not every motorcycle described broadly as 2023.5+ uses identical factory audio hardware or fairing geometry. Current Plug-and-Play Kit Lead Time The current listed fulfillment time for this plug-and-play system is approximately 5–10 business days. Build time may vary with component availability and motorcycle configuration. Everything Included in the Audio System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms and 800 watts RMS × 2 bridged at 4 ohms. Two DS18 PRO-HY6.4MSL Speakers One pair of 6.5-inch shallow hybrid speakers with 4-ohm impedance, 150-watt RMS power handling and built-in 1-inch titanium compression drivers. NAV-TV ZEN-H A2B Interface One factory A2B interface that converts the compatible Harley radio signal into eight channels of 5-volt analog RCA output for aftermarket amplifier integration. 4-AWG Amplifier Power Kit Heavy-gauge power and ground wiring with the primary connections and protection hardware required for the amplifier installation. Half-Inch Speaker Spacers Speaker-spacing components provide additional mounting clearance for the DS18 hybrid speakers in the applicable front fairing locations. Road Glide or Street Glide Configuration The selected Shopify variant identifies which motorcycle and fairing configuration the system is being prepared for. Two-speaker system: Rear speakers, saddlebag speaker adapters, speaker lids, rear-speaker wiring, rear grilles and a rear mounting system are not included unless separately added to the order. Speaker Impedance and Amplifier Channel Configuration Front-Left Speaker One PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated ION1600.4D amplifier channel. Front-Right Speaker The second PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Two Available Channels Two amplifier channels remain available for a compatible future rear-speaker pair after the required mounting and wiring components are installed. Included Speaker Count Two speakers / one pair Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Amplifier Output at 4Ω 240W RMS per channel Front-Left Channel One PRO-HY6.4MSL speaker at 4Ω Front-Right Channel One PRO-HY6.4MSL speaker at 4Ω Loaded Amplifier Channels Two Available Amplifier Channels Two Bridging Required No Output must be limited correctly: The ION1600.4D can produce more continuous power at 4 ohms than each included speaker is rated to handle. Correct gain, high-pass crossover and maximum clean output settings are required. DS18 ION1600.4D Four-Channel Amplifier The ION1600.4D is a compact full-range Class-D amplifier that delivers substantial output from a motorcycle-friendly chassis. High-level and RCA inputs, variable crossovers, protection circuits and a clipping indicator support flexible system integration and measured setup. 240W × 4 at 4Ω Published four-channel output for compatible 4-ohm speaker systems. 400W × 4 at 2Ω Available for separately designed compatible 2-ohm speaker systems. 800W × 2 Bridged Published bridged output into properly configured 4-ohm loads. Adjustable Crossovers Low-pass, high-pass and full-range modes support system-specific frequency control. Clip Indicator Power, protection and clipping indicators assist with safe amplifier setup. Compact Chassis The small amplifier footprint helps conserve installation space on a motorcycle. Amplifier Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 channels Output at 2Ω 400W RMS × 4 channels Bridged Output at 4Ω 800W RMS × 2 channels Frequency Response 10Hz–20kHz Signal-to-Noise Ratio Greater than 95dB Efficiency at 4Ω 88% Damping Factor 210 Total Harmonic Distortion 0.01% Input Range 0.2–6V Crossover Modes LPF / HPF / FULL Crossover Range 40Hz–2kHz Minimum Impedance 2Ω stereo / 4Ω bridged Power Input Terminal 4-AWG Published External Fuse 140A Cooling Fan Yes Dimensions 7.32 × 4.72 × 2 inches / 186 × 120 × 52mm Fuse and wiring verification: Confirm that the supplied 4-AWG power kit, fuse holder and installed fuse match the amplifier’s published current and protection requirements before operating the system. DS18 PRO-HY6.4MSL Hybrid Fairing Speakers Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange loudspeaker with a built-in 1-inch titanium compression driver. This two-way hybrid arrangement provides both midrange projection and high-frequency output from one speaker assembly. 150W RMS Each included speaker is rated for 150 watts RMS and 300 watts maximum. 4-Ohm Impedance Each speaker presents a nominal 4-ohm load to its dedicated amplifier channel. Hybrid Two-Way Design A built-in titanium compression driver supplies high-frequency output without a separate tweeter location. Shallow Mounting Depth The 2.82-inch mounting depth supports tight motorcycle fairing installations. IP65 Rated Water-resistant construction and a protected grille support powersports use. 140Hz High-Pass Reference DS18 publishes 140Hz as the recommended high-pass crossover reference. Speaker Model DS18 PRO-HY6.4MSL Quantity Included Two speakers / one pair Nominal Size 6.5 inches / 165.1mm Nominal Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Sensitivity 93dB, 1W / 1m Frequency Response 100Hz–20kHz Recommended High-Pass Crossover 140Hz Speaker Design Two-way shallow hybrid loudspeaker Midrange Voice Coil 1.5 inches / 38.6mm Compression Driver 1-inch titanium diaphragm with neodymium magnet Cone Material Water-resistant treated paper Weather Rating IP65 Front Mount Cutout 5.6 inches / 142mm Mounting Depth 2.82 inches / 72mm Protective Grille Included with each speaker Check fairing clearance: Half-inch spacers are included, but additional pod modification, magnet-cap clearance work or other installation adjustments may still be required depending on the exact motorcycle and factory enclosure. NAV-TV ZEN-H Factory A2B Integration The NAV-TV ZEN-H converts the compatible factory Harley-Davidson A2B radio signal into eight channels of analog RCA output for the DS18 amplifier and future system expansion. Eight Analog Outputs Supplies eight channels of low-level analog RCA output at up to 5 volts RMS. Factory Control Retention Retains compatible factory volume, balance, fader and radio EQ functions. Direct A2B Integration Interfaces directly with the compatible factory A2B data and audio system. Designed for compatible late-model Harley A2B audio systems Eight-channel analog RCA output Up to 5-volt RMS output Factory volume retention Factory balance and fader retention Factory EQ preset retention where supported No replacement aftermarket radio required No built-in system DSP: This package uses the standard ZEN-H interface and the conventional DS18 ION1600.4D amplifier. Advanced equalization, time alignment and output limiting require a separately added compatible DSP. Power Wiring and Speaker Installation 4-AWG Amplifier Wiring The included power kit supplies the heavy-gauge power and ground foundation required for the ION1600.4D amplifier. Half-Inch Speaker Spacers The supplied spacers provide additional fairing clearance for the shallow hybrid speakers. Disconnect the motorcycle battery before installation. Mount the amplifier securely with adequate ventilation. Install appropriate fuse protection close to the battery. Protect wiring from steering movement, heat and sharp edges. Use clean and secure battery and chassis connections. Confirm speaker depth and spacer clearance before assembly. Verify speaker polarity before reinstalling the fairing. Inspect battery and charging-system condition before high-output use. Gain and Crossover Setup Proper setup is critical because the ION1600.4D can produce more continuous power at 4 ohms than each included PRO-HY6.4MSL is rated to handle. Connect one front speaker to each of two amplifier channels. Do not bridge the amplifier channels for the included speakers. Configure the active channels for high-pass operation. Use 140Hz as the manufacturer’s published high-pass reference. Adjust the final crossover for the fairing and desired output. Set gain using measured clean output rather than by ear. Do not use amplifier gain as a volume control. Monitor the clipping indicator during setup. Reduce output immediately if distortion or mechanical noise occurs. Professional setup recommended: Incorrect gain or crossover settings can damage the speakers even when the system appears to play normally at moderate volume. Future Rear-Speaker Expansion Two unused amplifier channels and additional NAV-TV RCA outputs provide a path for a future rear-speaker upgrade. Rear expansion must be designed around compatible speaker impedance, RMS power handling, mounting depth, wiring and crossover requirements. Already Available Two unused amplifier channels Additional NAV-TV RCA outputs Four-channel amplifier crossover controls 4-AWG amplifier power foundation Required for Expansion Compatible rear speakers Saddlebag lids, adapters or speaker pods Rear-speaker wiring and connectors Correct impedance and RMS-power matching Final crossover and gain setup Rear equipment is not included: This remains a two-speaker audio system until compatible rear speakers, mounting components and wiring are purchased and installed. Complete System Specifications System Type Two-speaker plug-and-play motorcycle audio system Motorcycle Options Road Glide or Street Glide Vehicle Application Compatible 2023.5 and newer Harley-Davidson A2B applications Amplifier DS18 ION1600.4D four-channel Class-D amplifier Amplifier Output at 4Ω 240W RMS × 4 channels Included Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 150W RMS / 300W maximum per speaker Loaded Amplifier Channels Two channels at 4Ω each Available Amplifier Channels Two Factory Signal Interface NAV-TV ZEN-H A2B interface NAV-TV Output Eight-channel analog RCA at up to 5V RMS Power Wiring 4-AWG amplifier power installation kit Speaker Spacers Half-inch spacers included Built-In DSP No Rear Speakers Included No Shopify Option Choose Road Glide or Street Glide Current Listed Lead Time Approximately 5–10 business days Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, exact model, trim, Road Glide or Street Glide fairing, factory radio, factory amplifier, A2B configuration and current speaker setup before ordering. Select Road Glide or Street Glide before adding the kit to the cart. The package includes two front fairing speakers. Each included speaker has a nominal 4-ohm impedance. Two amplifier channels remain available for future expansion. The package uses NAV-TV factory A2B integration. The amplifier does not include built-in DSP. Half-inch speaker spacers are included. Additional fairing modification may still be required. Correct gain and high-pass crossover setup are required. Rear speakers and rear mounting components are not included. Professional installation and system setup are recommended. Best For Compatible 2023.5+ Harley-Davidson audio upgrades 2024+ Road Glide front-speaker upgrades 2024+ Street Glide front-speaker upgrades Factory Skyline radio and A2B audio integration High-output two-speaker fairing systems Riders planning to add saddlebag speakers later Professional motorcycle audio installations Related Motorcycle Audio Categories 2023.5+ Harley Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Motorcycle Amplifiers Signal and Amplifier Support Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries 2023.5+ Harley 2-Speaker Audio System FAQ How many speakers are included? The system includes two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers for the front fairing. What impedance are the included speakers? Each included speaker has a nominal impedance of 4 ohms. How much power can each speaker handle? Each PRO-HY6.4MSL is rated for 150 watts RMS and 300 watts maximum. How much power does the amplifier produce at 4 ohms? The ION1600.4D produces up to 240 watts RMS on each of its four channels at 4 ohms. Is the amplifier too powerful for the speakers? The amplifier can produce more continuous power than each speaker is rated to handle. It can be used safely when gain, high-pass crossover and maximum clean output are configured correctly. Are all four amplifier channels used? No. Two channels power the supplied speakers. Two channels remain available for a compatible future rear-speaker pair. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley A2B signal into analog RCA outputs that can be connected to the aftermarket amplifier. Does the NAV-TV interface retain factory controls? It retains compatible factory volume, balance, fader and supported EQ functions while integrating the aftermarket amplifier. Does this package include DSP? No. The standard ZEN-H interface and ION1600.4D amplifier do not provide advanced system DSP. A compatible external processor can be added when equalization, time alignment or output limiting is needed. Are the speakers weather resistant? Yes. The speakers are IP65 rated and use water-resistant cones and protective grille cloth. They should not be described as submersible. Can rear speakers be added later? Yes. The two unused amplifier channels can power a properly matched rear-speaker pair after the required speakers, wiring, mounting hardware and system setup are added. Are speaker spacers included? Yes. The package includes half-inch spacers to provide additional fairing speaker clearance. Will the speakers fit without modification? Fitment depends on the motorcycle and factory speaker enclosure. Additional spacing, pod modification or clearance work may still be required. Are saddlebag speakers included? No. This is a two-speaker system. Rear speakers, saddlebag mounting parts and rear-speaker wiring must be purchased separately. How long does the kit take to fulfill? The current listed lead time is approximately 5–10 business days, subject to component availability and motorcycle configuration. Need Help Matching This 2023.5+ Harley Audio System? Garage Bagger Stereo can help verify Road Glide or Street Glide fitment, speaker impedance selection, amplifier matching, speaker and amplifier mounting, power and speaker wiring, and factory A2B signal integration before installation. Installation Services Request a Custom Build -
Sale2023.5+ Harley-Davidson 2-Speaker Audio System | Ground Zero / SounDigital
Vendor:SounDigital XP Series2023.5 CVO / 2024+ HARLEY-DAVIDSON AUDIO 2023.5+ Harley-Davidson 2-Speaker Audio System | Ground Zero / SounDigital Upgrade a compatible late-model Harley-Davidson fairing with a complete two-speaker system built around Ground Zero GZCF 6.5SPL-NEO coaxial speakers, a SounDigital XP 800.4 amplifier, NAV-TV factory A2B integration and motorcycle-ready OFC power wiring. The included 4-ohm speakers operate from two individual amplifier channels, providing clean front-fairing output while preserving two amplifier channels for a properly matched future expansion. See Everything Included View Channel Configuration Complete Front Fairing System Compatible late-model Harley-Davidson applications Ground Zero GZCF 6.5SPL-NEO speaker pair 6.5-inch two-way coaxial construction 4-ohm impedance per speaker 100 watts RMS per speaker Neodymium speaker motors Integrated 1.1-inch Mylar tweeters GBS weather treatment for motorcycle use SounDigital XP 800.4 four-channel amplifier NAV-TV ZEN-H factory A2B integration Cicada Audio HDPG8K OFC power kit Factory-amplifier replacement configuration Two amplifier channels available for expansion Ground Zero and SounDigital Harley Audio Upgrade This Garage Bagger Stereo package combines the primary components required to replace the active factory-amplifier signal path and power a new pair of high-efficiency fairing speakers from the factory Harley-Davidson infotainment system. The Ground Zero GZCF 6.5SPL-NEO is a compact two-way coaxial speaker that combines a fiber-reinforced paper cone, high-excursion surround, neodymium motor and integrated Mylar tweeter in one 6.5-inch speaker assembly. The SounDigital XP 800.4 supplies four amplified channels. In the standard two-speaker configuration, one channel powers the left speaker and one channel powers the right speaker. The remaining two channels can support a properly matched future rear-speaker upgrade. Plug-and-play clarification: The A2B interface and integration hardware simplify connection to the factory radio. The installation still requires fairing removal, factory-amplifier removal or bypass, amplifier mounting, battery wiring, speaker installation and proper gain and crossover setup. Harley-Davidson Fitment 2023.5 CVO Models Intended for compatible late-production CVO motorcycles using the redesigned infotainment and factory A2B audio architecture. 2024+ Road Glide Supports compatible redesigned Road Glide motorcycles after confirming the factory radio, amplifier, speaker mounting and fairing-clearance requirements. 2024+ Street Glide Supports compatible redesigned Street Glide motorcycles after confirming the factory radio, amplifier, speaker mounting and fairing-clearance requirements. Exact fitment verification required: Confirm the motorcycle year, model, trim, factory radio, factory amplifier, factory speaker locations and existing audio modifications before ordering. Everything Included in the Audio System Ground Zero GZCF 6.5SPL-NEO Pair Two 6.5-inch, 4-ohm coaxial speakers rated for 100 watts RMS and 250 watts maximum per speaker. Garage Bagger Stereo Weather Treatment The included speaker pair receives added weather treatment for motorcycle fairing use before shipment. SounDigital XP 800.4 Amplifier One compact four-channel full-range amplifier providing up to 132 watts RMS per channel at 4 ohms. NAV-TV ZEN-H A2B Interface Converts the compatible factory Harley-Davidson A2B signal into low-level analog RCA outputs for the aftermarket amplifier. Cicada Audio HDPG8K Power Kit OFC 8-AWG amplifier power and ground installation kit configured for Harley-Davidson motorcycle audio installations. Factory-Amplifier Replacement Configuration The system is designed for an installation in which the stock amplifier is removed or bypassed from the active signal path. Confirm installation hardware: Verify the appropriate amplifier rack, speaker adapters, output wiring, RCA connections and model-specific mounting hardware required for the exact motorcycle. Amplifier and Speaker Configuration Front Speaker Channels One 4-ohm Ground Zero speaker operates from one amplifier channel. Two amplifier channels power the complete left and right fairing speaker pair. Future Expansion Channels Two amplifier channels remain available for a properly matched pair of rear, lid or lower-fairing speakers. Speaker Count Two speakers / one pair Speaker Model Ground Zero GZCF 6.5SPL-NEO Speaker Impedance 4Ω per speaker Speaker Power Handling 100W RMS / 250W maximum per speaker Amplifier Output at 4Ω 132W RMS × 4 Front Channels Used Two Available Amplifier Channels Two Bridged Operation Required No Output setup required: The amplifier has more available continuous power than each speaker’s RMS rating. Set gain, high-pass filtering and maximum clean output using proper test equipment. Ground Zero GZCF 6.5SPL-NEO Coaxial Speakers The GZCF 6.5SPL-NEO is engineered for efficient full-range output from a compact 6.5-inch platform. Its integrated tweeter eliminates the need for a separate fairing-mounted high-frequency driver. 100W RMS Each speaker handles 100 watts RMS and 250 watts maximum. 4-Ohm Impedance The fixed 4-ohm load works with one individual XP 800.4 channel. 93 dB Efficiency High efficiency supports strong output from practical motorcycle amplifier power. Neodymium Motor Compact high-energy motor construction reduces depth and weight. Integrated Mylar Tweeter A 1.1-inch coaxial tweeter reproduces upper-frequency detail from the same speaker location. GBS Weather Treatment The speaker pair is treated by Garage Bagger Stereo for motorcycle fairing use. Speaker Model GZCF 6.5SPL-NEO Quantity Included Two speakers / one pair Speaker Type Two-way coaxial loudspeaker Nominal Diameter 6.5 inches / 165 mm Nominal Impedance 4Ω per speaker Power Handling 100W RMS / 250W maximum per speaker Efficiency 93 dB Frequency Response 70 Hz–20 kHz Main Cone Fiber-reinforced pressed-paper cone Surround High-excursion waved textile surround Motor High-efficiency neodymium motor Basket Resonance-resistant steel basket Tweeter 1.1-inch / 28 mm Mylar tweeter Internal Crossover 6 dB per octave high-pass filtering Crossover Frequency 5 kHz Mounting Diameter 5.71 inches / 145 mm Mounting Depth 2.68 inches / 68 mm Verify fairing clearance: Confirm the mounting diameter, speaker depth, factory enclosure, grille clearance and any required adapter or spacer before installation. SounDigital XP 800.4 Four-Channel Amplifier The XP 800.4 is a compact full-range amplifier designed to provide four independently amplified channels from a motorcycle-friendly chassis. 132W × 4 at 4Ω Published output for the included Ground Zero speaker load. 200W × 4 at 2Ω Supports compatible future 2-ohm speaker configurations. 400W × 2 Bridged Bridged power is available for properly matched 4-ohm applications, but is not required for this speaker pair. Full-Range Response Wide frequency response supports coaxial, component and mid-bass motorcycle speakers. Adjustable Crossovers Variable high-pass and low-pass controls support speaker protection. Compact Chassis The small amplifier footprint supports fairing-based installation. Amplifier Model SounDigital XP 800.4 Amplifier Type Four-channel full-range amplifier Power at 4Ω 132W RMS × 4 Power at 2Ω 200W RMS × 4 Bridged Power at 4Ω 400W RMS × 2 Operating Voltage 9V–16V Music Current Draw 35A Maximum Current Draw 70A Published Recommended Fuse 40A Frequency Response 5 Hz–34 kHz Signal-to-Noise Ratio 91 dB High-Pass Crossover 45 Hz–850 Hz Low-Pass Crossover 45 Hz–850 Hz THD + Noise 0.1% at 10% rated power Published Power-Cable Recommendation 7-AWG OFC Published Speaker-Cable Recommendation 15-AWG Dimensions Approximately 5.7 × 4.4 × 2 inches Power wiring verification: Confirm the final power cable, ground cable, fuse holder and installed fuse against current SounDigital guidance before powering the amplifier. NAV-TV ZEN-H Factory A2B Integration The NAV-TV ZEN-H allows the compatible factory Harley-Davidson radio to supply low-level audio to the SounDigital amplifier without replacing the factory infotainment system. A2B Signal Conversion Converts the compatible factory digital audio signal into analog RCA outputs. Eight RCA Channels Provides up to eight analog output channels for aftermarket audio equipment. Factory Control Retention Retains supported volume, balance, fader, chimes, voice calls and factory EQ functions. Interface NAV-TV ZEN-H Manufacturer SKU NTV-KIT1021 Factory Input Harley-Davidson A2B digital audio Analog Outputs Eight RCA channels Maximum RCA Output Up to 5V RMS ZEN-H clarification: This package uses the standard NAV-TV ZEN-H for factory A2B conversion. It does not include the additional processing functions of the ZEN-H PRO. Power Wiring and Electrical Setup The included Cicada Audio HDPG8K provides an OFC power and ground foundation for the amplifier installation. Disconnect the motorcycle battery before installation. Install primary fuse protection close to the positive battery terminal. Use secure, corrosion-resistant battery and ground connections. Protect wiring from steering movement, heat and sharp edges. Keep signal wiring separated from high-current power wiring. Confirm charging-system and battery condition before high-output use. Verify the final cable size and fuse configuration before powering the amplifier. Electrical verification required: The included bundle lists an 8-AWG Cicada Audio power kit, while SounDigital publishes a 7-AWG minimum recommendation. Verify the completed installation against current amplifier requirements. Gain and Crossover Setup Connect one 4-ohm Ground Zero speaker to each front amplifier channel. Do not bridge the included speaker pair in the standard configuration. Configure protective high-pass filtering for both front speakers. Set gain using measured clean output rather than by ear. Limit amplifier output to the speakers’ continuous-power capability. Confirm left and right speaker polarity before reinstalling the fairing. Do not use amplifier gain as a volume control. Reduce output immediately if distortion or mechanical noise occurs. Professional setup recommended: Correct gain, high-pass filtering and output-voltage settings protect the speakers and improve long-term reliability. Installation Instructions and Resources Ground Zero Speaker Information Ground Zero GZCF 6.5SPL-NEO Owner’s Manual Speaker Polarity Check Fairing and A2B Installation Road Glide Fairing Removal Street Glide Fairing Removal Late-Model Harley A2B T-Harness Installation Guide Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Complete System Specifications System Type Two-speaker late-model Harley-Davidson fairing audio system Primary Applications Compatible 2023.5 CVO and 2024+ Road Glide or Street Glide Speakers Two Ground Zero GZCF 6.5SPL-NEO coaxial speakers Speaker Impedance 4Ω per speaker Speaker Power Handling 100W RMS / 250W maximum per speaker Amplifier SounDigital XP 800.4 Amplifier Output at 4Ω 132W RMS × 4 Front Amplifier Channels Used Two Available Amplifier Channels Two Factory Signal Integration NAV-TV ZEN-H A2B interface Power Wiring Cicada Audio HDPG8K OFC installation kit Speaker Treatment Garage Bagger Stereo weather treatment Factory Amplifier Removed or bypassed from the active signal path Rear Speakers Included No Shopify Variants None Fitment and Ordering Notes Submit complete motorcycle information: Confirm the motorcycle year, exact model, trim, factory radio, factory amplifier, speaker locations and current audio modifications. The system includes two fixed 4-ohm Ground Zero speakers. Each front speaker uses one individual amplifier channel. The standard configuration does not bridge the speakers. Two amplifier channels remain available for compatible expansion. Rear speakers and rear mounting components are not included. Verify speaker mounting diameter and depth before installation. Verify the correct Road Glide or Street Glide amplifier rack. Confirm all required adapters and speaker-output wiring. Verify the final power cable and fuse configuration. Correct gain and high-pass setup are required. Professional installation and tuning are strongly recommended. Current Shipping Promotion Enter code ShipOne at checkout for eligible free shipping. Current checkout eligibility and product exclusions apply. Related Motorcycle Audio Categories Late-Model Harley Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Motorcycle Speakers Motorcycle Amplifiers Amplifier and Signal Support Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Ground Zero and SounDigital Audio System FAQ Which speakers are included? The package includes one pair of Ground Zero GZCF 6.5SPL-NEO 6.5-inch two-way coaxial speakers. What impedance are the speakers? Each included speaker has a nominal impedance of 4 ohms. How much power does each speaker handle? Each speaker is rated for 100 watts RMS and 250 watts maximum. Are the speakers weatherproof? Garage Bagger Stereo supplies the speakers with added weather treatment for motorcycle fairing use. Which amplifier is included? The system includes the SounDigital XP 800.4 four-channel amplifier. How much power does the amplifier produce at 4 ohms? The XP 800.4 produces 132 watts RMS per channel at 4 ohms. Are the front speakers bridged? No. The standard configuration uses one individual amplifier channel for each 4-ohm front speaker. Are two amplifier channels still available? Yes. Two channels remain available for a properly matched future speaker expansion. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley-Davidson A2B signal into analog RCA outputs for the SounDigital amplifier. Does the stock amplifier remain active? No. This package is designed for a factory-amplifier replacement installation in which the stock amplifier is removed or bypassed from the active audio path. Are rear speakers included? No. Rear speakers, wiring and mounting components must be selected separately. Is professional installation recommended? Yes. The installation requires A2B signal integration, factory amplifier removal or bypass, battery wiring, amplifier mounting and measured gain and crossover setup. Need Help Matching This Harley Audio System? Garage Bagger Stereo can help verify motorcycle fitment, 4-ohm impedance selection, amplifier matching, speaker and amplifier mounting, power and speaker wiring and factory A2B signal integration before installation. Installation Services Request a Custom BuildSale -
SaleHertz Audio Harley Davidson Plug and Play Fairing Kit (14-23)
Vendor:Hertz2014-2023 Harley Davidson Plug and Play Fairing Kit Product highlights • Power Handling: 200W Peak / 100W RMS• Water-repellent pressed paper cone speakers • Plug and Play • IP55 Aluminum chassis • Built-in sealed power cord• 4, 3, 2 Channel Modes Current Lead Time 5-7 business daysSale -
2023.5+ Harley-Davidson Plug-and-Play 2-Speaker Audio Kit | DB Drive / SounDigital
Vendor:SounDigital EVO62023.5+ CVO / 2024+ HARLEY A2B AUDIO SYSTEM 2023.5+ CVO / 2024+ Harley Plug-and-Play 2-Speaker Audio Kit Upgrade a late-model Harley-Davidson Road Glide or Street Glide with DB Drive Euphoria XPERT 6.5-inch loudspeakers, a compact SounDigital 800.4 EVO6 amplifier, and the correct NAV-TV factory A2B interface. Choose the NAV-TV ZEN-H for direct A2B integration without an integrated DSP, or select the ZEN-H PRO for professional eight-channel DSP tuning. Compare A2B Options Verify Harley Fitment Complete Late-Model Harley Audio Upgrade Road Glide and Street Glide compatibility Designed for factory A2B audio systems Two DB Drive XPERT 6.5-inch loudspeakers SounDigital 800.4 EVO6 four-channel amplifier NAV-TV ZEN-H or ZEN-H PRO interface No bike-specific amplifier rack required Eight-gauge OFC amplifier wiring kit Harley speaker spacer rings Required factory speaker plug connection Professional DSP option available Choose Your NAV-TV A2B Configuration Both versions integrate the aftermarket amplifier with the factory Harley-Davidson A2B audio system. Your selection determines whether the kit includes standard A2B integration or an integrated professional DSP. STANDARD CONFIGURATION NAV-TV ZEN-H — No DSP Select the ZEN-H configuration for direct factory A2B integration and clean analog RCA output to the included SounDigital amplifier. Factory A2B audio integration Eight-channel analog RCA output Retains supported factory audio controls No integrated professional DSP DSP CONFIGURATION NAV-TV ZEN-H PRO — With DSP Select the ZEN-H PRO configuration for factory A2B integration with a professional eight-channel DSP built directly into the interface. Factory A2B audio integration Eight-channel analog RCA output Built-in eight-channel DSP Time alignment and phase control Advanced crossover and equalization control Select carefully: The ZEN-H PRO includes the integrated DSP. The standard ZEN-H option does not include the professional DSP tuning platform. DB Drive Euphoria XPERT 6.5-Inch Loudspeakers The included DB Drive EX6NCD-CFV2 loudspeakers combine a weather-resistant carbon-fiber cone with a rear-mounted compression driver for strong output and clear high-frequency performance in an open-air motorcycle environment. High-Output Construction A two-inch voice coil and neodymium M-ring magnet assembly support high-output motorcycle audio applications. Compression Driver The rear-mounted compression driver and wide-dispersion waveguide deliver clear upper-frequency output. Carbon-Fiber Cone Weather-resistant carbon-fiber cones and aluminum baskets provide a strong foundation for demanding powersports installations. Speaker Model DB Drive Euphoria XPERT EX6NCD-CFV2 Speaker Size 6.5 inches Configuration Two-way loudspeaker with rear-mounted compression driver Power Handling 400 watts Dynamic Power 800 watts Nominal Impedance 3 ohms Sensitivity 106.1 dB at 1 watt / 1 meter Mounting Depth 3.44 inches Protective Grilles Included Quantity One matched pair SounDigital 800.4 EVO6 Amplifier The included SounDigital 800.4 EVO6 provides 800 watts RMS of four-channel power from a compact amplifier platform well suited for motorcycle installations where available space is limited. 800 Watts RMS Four-channel output provides a strong power platform for the included front speaker system. Compact EVO6 Chassis The compact amplifier footprint helps simplify installation in space-restricted Harley-Davidson applications. Expansion Foundation The four-channel design gives the system a practical foundation for future audio-system planning. What Is Included With Every Kit SounDigital Amplifier One SounDigital 800.4 EVO6 800-watt four-channel amplifier. DB Drive Loudspeakers One pair of DB Drive Euphoria XPERT EX6NCD-CFV2 6.5-inch two-way loudspeakers. Amplifier Wiring Kit One Cicada Audio HDPG8K eight-gauge HD OFC amplifier installation kit. Speaker Spacer Rings One pair of DS18 6.5-inch Harley-Davidson speaker spacer rings. Harley Speaker Connection The required factory speaker plug connection for the included fairing speakers. NAV-TV A2B Interface Your selected NAV-TV ZEN-H or ZEN-H PRO factory A2B interface. No model-specific amplifier rack: This kit does not require separate Road Glide and Street Glide amplifier-rack variants. Harley-Davidson Fitment Road Glide Designed for compatible late-model Road Glide motorcycles equipped with the factory Skyline head unit and A2B audio architecture. Street Glide Designed for compatible late-model Street Glide motorcycles equipped with the factory Skyline head unit and A2B audio architecture. CVO Applications Supports compatible CVO applications using the same late-model factory A2B audio platform. Confirm the factory audio system: Verify the exact motorcycle year, model, factory head unit, factory amplifier, and A2B configuration before ordering. Complete System Specifications System Type Complete two-speaker plug-and-play motorcycle audio system Motorcycle Platform Late-model Harley-Davidson A2B Touring platform Motorcycle Models Road Glide, Street Glide, and compatible CVO applications Speaker Count Two Speaker Size 6.5 inches Speaker Impedance 3 ohms Amplifier SounDigital 800.4 EVO6 Amplifier Output 800 watts RMS total across four channels Factory Signal Type A2B digital audio Standard Interface NAV-TV ZEN-H, NTV-KIT1021 DSP Interface NAV-TV ZEN-H PRO, NTV-KIT1022 DSP Included Variant dependent Amplifier Rack No bike-specific rack included or required Saddlebag Speakers Included No Installation and Ordering Notes Select the ZEN-H no-DSP or ZEN-H PRO DSP configuration. Confirm that the motorcycle uses the supported factory A2B audio system. Verify Road Glide, Street Glide, or compatible CVO fitment. Disconnect the motorcycle battery before installation. Secure the amplifier in a dry, protected, and ventilated location. Confirm speaker clearance before final fairing assembly. Complete amplifier gain and crossover setup after installation. Professional DSP tuning is recommended for the ZEN-H PRO version. Related Motorcycle Audio Categories Shop Audio Components Motorcycle Speakers Motorcycle Amplifiers Motorcycle Amplifier Parts Late-Model Harley Audio 2023.5+ CVO / 2024+ Harley Audio Kits Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Late-Model Harley 2-Speaker Kit FAQ What motorcycles does this kit fit? It is designed for compatible late-model Harley-Davidson Road Glide, Street Glide, and CVO motorcycles equipped with the factory Skyline head unit and A2B audio architecture. What is the difference between the ZEN-H and ZEN-H PRO? The ZEN-H provides factory A2B integration and analog RCA output. The ZEN-H PRO adds a professional eight-channel DSP with advanced tuning controls. Do I need separate Road Glide and Street Glide versions? No. The components included in this kit are the same for the supported Road Glide and Street Glide applications. Is an amplifier rack included? No model-specific amplifier rack is included or required as part of this package. How many speakers are included? The kit includes one pair of DB Drive Euphoria XPERT EX6NCD-CFV2 6.5-inch two-way loudspeakers. Is the amplifier included? Yes. Both configurations include the SounDigital 800.4 EVO6 four-channel amplifier. Does every version include DSP? No. Select the ZEN-H PRO version for integrated DSP. The standard ZEN-H configuration does not include the professional DSP platform. Are saddlebag speakers included? No. This is a two-speaker front audio system. Saddlebag speakers and additional rear-audio components are sold separately. Need Help Selecting the Correct A2B Kit? Garage Bagger Stereo can help verify motorcycle fitment, A2B compatibility, DSP selection, speaker impedance, amplifier matching, mounting, wiring, and factory signal integration before installation. Installation Services Request a Custom Build -
Sale2023.5+ Harley-Davidson 2-Speaker Plug-and-Play Audio System | Cicada / SounDigital
Vendor:SounDigital XP Series2023.5+ CVO / 2024+ ROAD GLIDE & STREET GLIDE 2023.5+ Harley-Davidson 2-Speaker Plug-and-Play Audio System Upgrade a compatible late-model Harley-Davidson with two high-output Cicada Audio pro coaxial horn speakers, a compact SounDigital four-channel amplifier, NAV-TV factory A2B integration and the primary amplifier power wiring required for installation. Choose the 4-ohm CHX65.4 version for a bridged two-speaker system or the 2-ohm CHX65.2 version for a stereo configuration that leaves two amplifier channels available for a properly matched future rear-speaker upgrade. Compare 2Ω and 4Ω Options See Everything Included Complete Two-Speaker Audio System Compatible late-model Harley A2B applications Road Glide and Street Glide fitment support Cicada CHX65.2 or CHX65.4 speaker pair 300 watts RMS per speaker Built-in coaxial horn tweeters External 12dB passive crossovers SounDigital XP 800.4 four-channel amplifier Up to 400 watts RMS × 2 bridged at 4Ω Up to 200 watts RMS × 4 at 2Ω NAV-TV ZEN-H A2B integration Cicada Audio OFC amplifier power wiring All-weather motorcycle speaker construction Complete 2-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package combines a pair of Cicada Audio CHX65 pro coaxial horn speakers, a SounDigital XP 800.4 amplifier, NAV-TV ZEN-H factory signal integration and an amplifier power kit into one late-model Harley-Davidson audio system. Each CHX65 combines a Carbon Matrix Composite mid-bass cone with an aluminum-diaphragm horn tweeter. The supplied external crossover divides the signal between the mid-bass and tweeter sections while optional resistor packs allow the tweeter output to be reduced when required. The product is offered with either 2-ohm or 4-ohm speakers. The correct option depends on whether the system will remain a high-output two-speaker configuration or be expanded into a four-speaker system. Plug-and-play clarification: The NAV-TV interface provides plug-and-play integration with a compatible factory A2B audio system. The complete installation still requires amplifier mounting, battery wiring, fuse protection, crossover mounting, speaker wiring and proper gain and crossover setup. Harley-Davidson Fitment 2023.5+ Harley CVO Intended for compatible late-production CVO motorcycles using the Skyline infotainment and factory A2B audio platform. 2024+ Road Glide Supports compatible redesigned Road Glide motorcycles after confirming factory radio, amplifier, speaker clearance and mounting requirements. 2024+ Street Glide Supports compatible redesigned Street Glide motorcycles after confirming factory radio, amplifier, speaker clearance and mounting requirements. Exact motorcycle verification required: Confirm the motorcycle year, model, trim, factory radio, factory amplifier, A2B configuration and existing audio modifications before ordering. Choose the Correct Speaker Impedance 4Ω CHX65.4 Configuration The two 4-ohm speakers are designed to use the SounDigital amplifier’s bridged channel pairs. One speaker connects to channels 1/2 and the other connects to channels 3/4. Two CHX65.4 speakers 4Ω nominal impedance per speaker 300W RMS per speaker Up to 400W RMS available per bridged channel pair All four amplifier channels are used Best for a dedicated high-output two-speaker system 2Ω CHX65.2 Configuration Each 2-ohm speaker connects to its own amplifier channel. Two amplifier channels remain available for a compatible future rear-speaker pair. Two CHX65.2 speakers 2Ω nominal impedance per speaker 300W RMS per speaker Up to 200W RMS available per active channel Two amplifier channels remain available Best for planned four-speaker expansion 4Ω Variant Speaker Model Cicada Audio CHX65.4 4Ω Amplifier Layout Two bridged channel pairs 4Ω Available Output 400W RMS × 2 bridged 2Ω Variant Speaker Model Cicada Audio CHX65.2 2Ω Amplifier Layout One speaker per amplifier channel 2Ω Available Output 200W RMS per active channel Unused Channels with 4Ω Variant None Unused Channels with 2Ω Variant Two 4Ω output must be limited: The amplifier can produce more bridged power than each CHX65.4 is rated to handle continuously. Correct gain, crossover and maximum clean-output setup are required. Everything Included in the Audio System Cicada CHX65 Speaker Pair One matched pair of 6.5-inch pro coaxial horn speakers in the selected 2-ohm or 4-ohm configuration. External Passive Crossovers Two custom 12dB vented crossover networks divide the amplifier output between each mid-bass cone and horn tweeter. Tweeter Attenuation Resistors Optional -3dB and -6dB resistor packs allow the high-frequency output to be reduced when required by the installation or tuning. SounDigital XP 800.4 Amplifier One compact full-range four-channel Class-D amplifier capable of stereo or bridged operation. NAV-TV ZEN-H A2B Interface Factory A2B interface supplying eight channels of analog RCA output for aftermarket amplifier integration. Cicada Audio OFC Power Kit Amplifier power and ground wiring with battery-side terminals, amplifier-side termination and fuse protection. Confirm the current physical bundle: Verify amplifier mounting, speaker spacers, adapter rings, RCA wiring and model-specific hardware before releasing the order. These parts are not listed in the original bundle description. Cicada Audio CHX65 Pro Coaxial Horn Speakers The CHX65 is designed for riders who need strong vocal projection, detailed high-frequency output and an all-weather speaker construction suitable for open-air motorcycle use. 300W RMS Each speaker is rated for 300 watts RMS and 600 watts maximum. Coaxial Horn Design A high-output mid-bass cone and horn tweeter share one compact basket. All-Weather Construction Waterproofing and UV protection support motorcycle installations. Carbon Matrix Cone The lightweight, rigid cone is engineered for efficient projection. Neodymium Motor The compact N35SH motor reduces weight while maintaining output. External Crossover The supplied 12dB network protects and filters the horn tweeter. Available Models CHX65.2 and CHX65.4 Quantity Included Two speakers / one pair Speaker Size 6.5 inches Available Impedance 2Ω or 4Ω per speaker Power Handling 300W RMS / 600W maximum per speaker Mid-Bass Voice Coil 2 inches / 51mm Tweeter Voice Coil 1.4 inches / 35.56mm Cone Carbon Matrix Composite Tweeter Diaphragm Aluminum Crossover External 12dB vented passive crossover Tweeter Attenuation Optional -3dB and -6dB resistor packs Magnet Neodymium Sensitivity 92dB Frequency Response 70Hz–20kHz ±4dB Mounting Depth 2.64 inches / 67mm Mounting Diameter 5.67 inches / 144mm Protect the external crossovers: Mount both crossover networks where they remain secure, ventilated and protected from direct water exposure, steering movement and sharp edges. SounDigital XP 800.4 Four-Channel Amplifier The SounDigital XP 800.4 is a compact full-range Class-D amplifier that can operate four stereo channels or two bridged channel pairs. Its flexible layout supports both CHX65 impedance options. 132W × 4 at 4Ω Four-channel output for compatible 4-ohm stereo applications. 200W × 4 at 2Ω Ideal for the 2-ohm speaker option and planned four-speaker systems. 400W × 2 Bridged High-output bridged configuration for the 4-ohm speaker option. Full-Range Operation Supports the frequency range required by coaxial horn speakers. Variable Crossovers Adjustable high-pass and low-pass filtering from 45Hz to 850Hz. Compact Installation The small chassis supports space-conscious motorcycle installations. Amplifier Model SounDigital XP 800.4 Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 132W RMS × 4 Output at 2Ω 200W RMS × 4 Bridged Output at 4Ω 400W RMS × 2 Operating Voltage 9V–16V Music Current Draw 35A Maximum Current Draw 70A Recommended Fuse 40A Frequency Response 5Hz–34kHz Signal-to-Noise Ratio 91dB High-Pass Crossover 45Hz–850Hz Low-Pass Crossover 45Hz–850Hz THD + Noise 0.1% at 10% rated power Published Power Cable Recommendation 7-AWG Published Speaker Cable Recommendation 15-AWG Dimensions 5.7 × 4.4 × 2 inches / 14.5 × 11.3 × 5.1cm NAV-TV ZEN-H Factory A2B Integration The NAV-TV ZEN-H converts the compatible factory Harley-Davidson A2B signal into analog RCA outputs for the SounDigital amplifier while retaining supported factory audio controls. Eight RCA Outputs Provides eight channels of low-level analog audio output. Up to 5V RMS Supplies a strong preamplifier signal for compatible equipment. Factory Control Retention Retains supported volume, fader, balance, chimes and EQ presets. Standard ZEN-H configuration: The standard ZEN-H provides A2B conversion but does not include the professional eight- channel DSP found in the ZEN-H PRO. Add an external DSP when advanced equalization, time alignment or limiting is required. Power Wiring and Electrical Requirements The original bundle lists a Cicada Audio OFC 8-gauge power kit. The power and ground wiring must be installed with secure terminals, short protected routing and the correct fuse near the battery. Disconnect the motorcycle battery before installation. Mount the fuse holder close to the positive battery connection. Use a clean, secure power and ground connection. Protect wiring from heat, steering movement and sharp edges. Confirm the final fuse value before powering the amplifier. Verify cable size against the amplifier, cable length and installation. Inspect battery and charging-system condition before high-output use. Power-cable verification: The bundle currently lists an 8-AWG kit, while current SounDigital documentation lists 7-AWG as the XP 800.4 recommendation. Confirm the final cable and fuse configuration before installation or fulfillment. Installation Instructions and Resources Speaker and Crossover Setup Cicada Coaxial Horn Speaker Manual Speaker Polarity Check Fairing and A2B Installation Road Glide Fairing Removal Street Glide Fairing Removal A2B T-Harness Installation Guide Professional Installation Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Amplifier Installation Parts Complete System Specifications System Type Two-speaker plug-and-play motorcycle audio system Primary Applications 2023.5+ CVO and compatible 2024+ Road Glide or Street Glide Speaker Options Cicada CHX65.2 or CHX65.4 Speaker Count Two speakers / one pair Speaker Power Handling 300W RMS / 600W maximum per speaker Amplifier SounDigital XP 800.4 4Ω Variant Configuration 400W RMS × 2 bridged 2Ω Variant Configuration 200W RMS per active stereo channel Factory Signal Interface NAV-TV ZEN-H A2B interface ZEN-H Output Eight analog RCA channels at up to 5V RMS Power Wiring Cicada Audio OFC 8-AWG power and ground kit Built-In DSP No Rear Speakers Included No Shopify Variants Choose 2Ω or 4Ω speakers Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, model, trim, factory radio, factory amplifier, A2B configuration, desired speaker impedance and future rear-speaker plans. Select the 2Ω or 4Ω speaker option before adding the kit to the cart. The package includes two front fairing speakers. The 4Ω version uses both bridged amplifier channel pairs. The 2Ω version uses two individual amplifier channels. The 2Ω configuration leaves two channels available for expansion. The external passive crossovers must be installed and protected. The NAV-TV ZEN-H supplies factory A2B signal integration. The system does not include built-in DSP. Confirm speaker depth, grille clearance and fairing fitment. Confirm amplifier mounting hardware before installation. Correct gain and high-pass crossover setup are required. Professional installation and tuning are recommended. Related Motorcycle Audio Categories Late-Model Harley Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Shop Cicada Audio Amplifier and Signal Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada and SounDigital 2-Speaker System FAQ How many speakers are included? The system includes one pair of Cicada CHX65 6.5-inch pro coaxial horn speakers. Can I choose 2-ohm or 4-ohm speakers? Yes. The product includes separate CHX65.2 and CHX65.4 Shopify variants. Which option is best for a two-speaker system? The 4-ohm version can use the amplifier’s two bridged channel pairs for a dedicated high-output two-speaker configuration. Which option is best when adding rear speakers later? The 2-ohm version uses one amplifier channel per front speaker and leaves two channels available for a compatible rear-speaker pair. How much power do the CHX65 speakers handle? Each CHX65.2 or CHX65.4 is rated for 300 watts RMS and 600 watts maximum. How much power does the amplifier produce? The XP 800.4 produces 132 watts RMS × 4 at 4 ohms, 200 watts RMS × 4 at 2 ohms or 400 watts RMS × 2 bridged at 4 ohms. Are crossovers included? Yes. Each speaker uses an external 12dB crossover with optional tweeter-attenuation resistor packs. Does the system include factory A2B integration? Yes. The package includes the standard NAV-TV ZEN-H A2B interface. Does the ZEN-H include DSP? No. The standard ZEN-H converts the factory A2B signal to analog RCA output but does not include the DSP functions found in the ZEN-H PRO. Is the power kit included? Yes. The original bundle lists a Cicada Audio OFC 8-gauge amplifier power and ground kit. Are rear speakers included? No. This is a two-speaker system. Rear speakers, mounting components and rear-speaker wiring must be purchased separately. Are the speakers weather resistant? Yes. Cicada describes the CHX65 series as an all-weather design with waterproofing and UV protection. Is professional installation recommended? Yes. The system requires A2B integration, amplifier power wiring, secure crossover placement, correct impedance configuration and measured gain and crossover setup. Need Help Matching This Harley Audio System? Garage Bagger Stereo can help verify motorcycle fitment, 2-ohm or 4-ohm impedance selection, amplifier matching, speaker and amplifier mounting, power and speaker wiring, crossover placement and factory A2B signal integration before installation. Installation Services Request a Custom BuildSale -
2014-2023 Harley-Davidson Ultra 4-Speaker Audio System | Cicada Audio
Vendor:Cicada Audio2014-2023 HARLEY-DAVIDSON ULTRA AUDIO 2014-2023 Harley-Davidson Ultra 4-Speaker Audio System | Cicada Audio | 14FLXCXX-4X4U A complete Cicada Audio upgrade built for 2014-2023 Harley-Davidson Ultra motorcycles, combining a 4-channel FLX500.4 amplifier with two pairs of CXX65.2 Pro Coaxial speakers for four total speaker locations. The system ships complete with amplifier mounting hardware and Cicada-branded grilles for both Road Glide Ultra and Street Glide Ultra, so both sets are included with every order. See Everything Included View Channel Configuration Complete 4-Speaker Ultra System 2014-2023 Road Glide Ultra / Street Glide Ultra Cicada FLX500.4 4-channel amplifier Two pairs of CXX65.2 Pro Coaxial speakers (4 total) Model-specific amp rack and grilles included H-D T-harness with Maestro AR compatibility 8 AWG amplifier power install kit Cicada Audio Ultra 4-Speaker System Overview This Garage Bagger Stereo package is built around Cicada Audio's 14FLXCXX-4X4U system, engineered specifically for 2014-2023 Harley-Davidson Ultra motorcycles. It pairs a compact 4-channel amplifier with four Pro Coaxial speakers, giving each speaker its own dedicated amplifier channel for clean, evenly powered output front and rear. Because Road Glide Ultra and Street Glide Ultra use different amplifier mounting locations and grille shapes, this system includes both the Road Glide and Street Glide amplifier racks and both grille sets in every kit, so the correct hardware is on hand no matter which model you're installing on. Harley-Davidson Fitment 2014-2023 Road Glide Ultra Includes the 14HDAR-RG amplifier mounting rack and CHDRGG Cicada-branded grille set, included in every kit. 2014-2023 Street Glide Ultra Includes the 14HDAR-SG amplifier mounting rack and CHDSGG Cicada-branded grille set, included in every kit. Factory Speaker Locations Speakers are designed for factory Harley-Davidson speaker locations on 2014-and-newer touring models. Exact fitment verification required: Confirm your motorcycle year, model, existing radio, and any prior audio modifications before ordering. Everything Included in the System Cicada FLX500.4 Amplifier One compact 4-channel amplifier producing 95 watts RMS per channel at 4 ohms, or 125 watts RMS per channel at 2 ohms. (2) CXX65.2 Speaker Pairs Four total 6.5-inch, 2-ohm Pro Coaxial speakers with Kevlar cones and PEI tweeter domes. Both Amplifier Racks Included 14HDAR-RG for Road Glide Ultra and 14HDAR-SG for Street Glide Ultra, both included in every kit. Both Grille Sets Included CHDRGG for Road Glide Ultra and CHDSGG for Street Glide Ultra, both included with mounting hardware. HDPG8K Power Install Kit 8 AWG amplifier power and ground installation kit sized for the FLX500.4. HDTSLINKAR T-Harness Harley-Davidson T-harness with Maestro AR compatibility for factory radio and steering-control integration. Confirm installation hardware: Verify amplifier mounting location, speaker wiring runs, and any additional adapters needed for your specific motorcycle before installation. Amplifier and Speaker Configuration Four Independent Channels Each of the four 2-ohm CXX65.2 speakers is powered by its own dedicated FLX500.4 amplifier channel. No bridging is required. Matched 2-Ohm Load The FLX500.4's 2-ohm rating is matched directly to the CXX65.2's 2-ohm impedance for full rated output per channel. Speaker Count Four speakers / two pairs Speaker Model Cicada CXX65.2 Speaker Impedance 2Ω per speaker Speaker Power Handling 100W RMS / 200W maximum per speaker Amplifier Output at 2Ω 125W RMS × 4 Channels Used Four (one per speaker) Bridged Operation Required No Output setup required: Set gain and crossover points using proper test equipment rather than by ear to protect the speakers and amplifier. Cicada CXX65.2 Pro Coaxial Speakers The CXX65.2 is designed specifically for factory Harley-Davidson speaker locations, combining a Kevlar cone with a PEI-dome tweeter and Cicada's V8 Dispersion Guide for wide, even coverage. 100W RMS Each speaker handles 100 watts RMS and 200 watts maximum. 2-Ohm Impedance Matched to run one speaker per FLX500.4 channel. 93 dB Sensitivity High efficiency for strong output from motorcycle amplifier power. Kevlar Cone Lightweight, moisture-resistant, and built for efficiency. PEI Dome Tweeter Moisture-resistant tweeter dome for bright, dispersed high frequencies. Rain or Shine™ Design All-weather construction built for open-air motorcycle use. Speaker Model Cicada CXX65.2 Quantity Included Four speakers / two pairs Speaker Type Two-way coaxial loudspeaker Nominal Diameter 6.5 inches Nominal Impedance 2Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Sensitivity 93 dB Frequency Response 55 Hz–20 kHz ±3dB Cone Material Kevlar Tweeter 1-inch / 25mm PEI dome Mid-Bass Voice Coil 1.4-inch / 35mm Magnet N45H Neodymium Internal Crossover Built-in 6 dB crossover Mounting Diameter 5.43 inches / 138mm Mounting Depth 2.26 inches / 57mm Grilles & Hardware Included Warranty Two-year Cicada Audio warranty Verify mounting clearance: Confirm mounting diameter, depth, and grille fitment against your motorcycle before installation. Cicada FLX500.4 Four-Channel Amplifier The FLX500.4 is a compact, high-efficiency Class-D amplifier built for motorcycle installs where space is limited but clean, dedicated power per speaker still matters. 125W × 4 at 2Ω Rated output matched to the included 2-ohm speakers. 95W × 4 at 4Ω Also supports 4-ohm speaker configurations. 250W × 2 Bridged Bridged mode available for properly matched applications. Ultra-Compact Chassis Sized to fit inside fairings, saddlebags, and tight mounting locations. Adjustable Crossovers Selectable LPF/FULL/HPF with 20 Hz–20 kHz range and 6/12/24/48 dB slopes. Flexible Turn-On REM, DC, or VOX turn-on modes for factory or aftermarket sources. Amplifier Model Cicada FLX500.4 Amplifier Type Four-channel Class-D amplifier Power at 4Ω 95W RMS × 4 Power at 2Ω 125W RMS × 4 Bridged Power at 4Ω 250W RMS × 2 Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Fuse 50A Frequency Response 20 Hz–20 kHz ±3dB Signal-to-Noise Ratio 91 dB (A-weighted) Damping Factor 200 THD + Noise 0.1% at 10% rated power (2Ω per channel) Gain Range 0.2V–12V Turn-On Modes REM / DC / VOX Crossover Modes LPF / FULL / HPF Crossover Range 20 Hz–20,000 Hz Crossover Slopes 6 / 12 / 24 / 48 dB per octave Dimensions (with brackets) 5.2 × 4.9 × 2.0 in Dimensions (chassis only) 4.0 × 4.9 × 2.0 in Power wiring verification: Confirm final power cable, ground cable, and fuse configuration against current Cicada Audio guidance before powering the amplifier. Factory Radio Integration The included HDTSLINKAR T-harness with Maestro AR compatibility integrates the amplifier with the factory Harley-Davidson radio system, supporting factory steering-control and audio integration on compatible models. Confirm compatibility: Verify Maestro AR module compatibility with your specific year and factory radio before ordering. Power Wiring and Installation Notes Disconnect the motorcycle battery before installation. Install primary fuse protection close to the positive battery terminal. Use secure, corrosion-resistant battery and ground connections. Protect wiring from steering movement, heat, and sharp edges. Keep signal wiring separated from high-current power wiring. Confirm charging-system and battery condition before high-output use. Connect one CXX65.2 speaker to each of the four amplifier channels. Set gain using measured clean output rather than by ear. Use the Road Glide or Street Glide amplifier rack and grille set that matches your motorcycle; the unused set can be kept as a spare. Professional installation recommended: Correct mounting, wiring, and gain setup protect the speakers and amplifier and improve long-term reliability. Related Motorcycle Audio Categories Cicada Audio Shop Cicada Audio Motorcycle Speakers Motorcycle Amplifiers Amplifier and Power Support Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada Ultra 4-Speaker System FAQ Which motorcycles does this system fit? This system is built for 2014-2023 Harley-Davidson Road Glide Ultra and Street Glide Ultra motorcycles. Does it include hardware for both Road Glide and Street Glide? Yes. Every kit includes both the Road Glide and Street Glide amplifier racks and both grille sets, so you simply use the set that matches your motorcycle. How many speakers are included? Four total Cicada CXX65.2 Pro Coaxial speakers, supplied as two matched pairs. What impedance are the speakers? Each included speaker has a nominal impedance of 2 ohms. How much power does each channel produce? The FLX500.4 produces 125 watts RMS per channel at 2 ohms, matched to the included speakers. Are the speakers bridged? No. Each of the four speakers runs from its own individual amplifier channel. Does this integrate with the factory radio? Yes, through the included HDTSLINKAR T-harness with Maestro AR compatibility on supported models. Is professional installation recommended? Yes. Installation involves amplifier mounting, power wiring, speaker installation, and measured gain setup. Need Help Building the Right Ultra Audio System? Garage Bagger Stereo can help with impedance selection, amplifier matching, mounting, wiring and signal integration for your 2014-2023 Harley-Davidson Ultra. Installation Services Request a Custom Build -
Cicada Audio 24FLXCXX-4X2SG 500W 2-Speaker System for 2024+ Street Glide
Vendor:Cicada AudioCOMPLETE 2024+ STREET GLIDE FRONT AUDIO SYSTEM Cicada Audio 24FLXCXX-4X2SG 500W 2-Speaker Audio System The Cicada Audio 24FLXCXX-4X2SG is a complete front-fairing audio package for compatible 2024 and newer Harley-Davidson Street Glide motorcycles. It combines a compact four-channel amplifier, two high-efficiency 2-ohm Pro Coaxial speakers, factory A2B radio integration, Street Glide-specific mounting hardware and a rear-output harness for future system expansion. See Everything Included View Speaker Load Front Audio with Rear Expansion Support Designed for compatible 2024+ Street Glide motorcycles FLX500.4 compact four-channel Class-D amplifier 125 watts RMS × 4 channels at 2Ω Two CXX65.2 6.5-inch Pro Coaxial speakers Both included speakers are 2Ω Street Glide fairing grilles included NAV-TV ZEN-H A2B factory-radio integration Street Glide amplifier rack included 8-AWG amplifier power kit included Rear-output harness included for future expansion 24FLXCXX-4X2SG Complete System Overview This Cicada Audio package upgrades the two factory Street Glide fairing speaker locations while installing the four-channel amplifier, power wiring, A2B interface and output wiring needed for a larger system. One pair of CXX65.2 6.5-inch Pro Coaxial speakers installs behind the included Cicada-branded Street Glide fairing grilles. Each speaker has a nominal impedance of 2 ohms and connects to its own amplifier channel. The FLX500.4 provides four amplified channels. The supplied configuration uses two channels for the front speaker pair, while the included 24HDRO harness prepares the other two channels for a separately purchased rear-speaker upgrade. Standard Non-DSP System Configuration FLX500.4 Power Amplifier This package uses the standard FLX500.4 four-channel amplifier. It delivers compact Class-D power but does not include an integrated digital signal processor. NAV-TV ZEN-H A2B Integration The included ZEN-H interface extracts the factory digital A2B audio signal and connects it directly to the Cicada amplifier through the included vehicle-specific harness. No built-in DSP: This package does not provide DSP equalization, time alignment or digital output limiting. Those functions require a separately purchased compatible digital signal processor. Speaker Impedance and Amplifier Channel Load Front Left: 2Ω One CXX65.2 speaker connects to the assigned left-front amplifier channel and presents a nominal 2-ohm load. Front Right: 2Ω The second CXX65.2 speaker connects to the assigned right-front amplifier channel and presents a nominal 2-ohm load. Rear Channels: Available No rear speakers are included. The remaining two amplifier channels can power a properly matched future rear-speaker system. Included Speaker Count Two speakers / one pair Included Speaker Model CXX65.2 Speaker Impedance 2Ω per speaker Supplied Configuration One 2Ω speaker on each of two amplifier channels Remaining Amplifier Channels Two channels available for compatible rear-speaker expansion Supplied system load: Only two amplifier channels are loaded by the included speakers. Each loaded channel operates at a nominal 2 ohms. Rear-speaker impedance must be matched correctly before connecting additional speakers. Everything Included in the Complete System FLX500.4 — Four-Channel Amplifier One compact Class-D amplifier rated for 125 watts RMS × 4 channels at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. CXX65.2 — 6.5" Pro Coaxial Speakers One pair of 2-ohm CXX65.2 speakers for the Street Glide fairing. Each speaker is rated for 100 watts RMS and uses a Kevlar cone, integrated PEI tweeter and built-in 6dB crossover. 24CHDSGG — Street Glide Fairing Grilles One pair of Cicada Audio-branded aluminum fairing grilles designed specifically for compatible 2024 and newer Street Glide motorcycles. 24HDAR-SG — Street Glide Amplifier Rack Black-anodized aluminum amplifier rack that uses compatible factory amplifier mounting locations and includes predrilled FLX mounting points and installation hardware. HDPG8K — 8-AWG Amplifier Power Kit Includes six-foot power and ground cables with black braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring, a waterproof Mini-ANL fuse holder and 60-, 80- and 100-amp fuses. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect amplifier harness and correctly pinned, positive-locking Molex connections. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, two short extensions and two longer speaker-wire leads for future rear-speaker installation. Rear-speaker ready: The rear-output harness and two additional amplifier channels are included. Rear speakers, speaker lids, saddlebag adapters and rear mounting hardware are sold separately. FLX500.4 Amplifier Power 125W × 4 at 2Ω The amplifier produces up to 125 watts RMS on each of its four channels when operating at 2 ohms and 14.4 volts. 95W × 4 at 4Ω The amplifier also supports four-channel operation with compatible 4-ohm speakers. 250W × 2 Bridged The published bridged configuration is 250 watts RMS × 2 into compatible 4-ohm loads. Wide Input Range The 0.2V–12V gain range supports compatible factory-radio interfaces, aftermarket radios and external signal processors. Flexible Crossovers Selectable LPF, FULL and HPF modes provide 20Hz–20kHz adjustment with selectable 6, 12, 24 or 48dB-per-octave slopes. Compact Motorcycle Chassis The small aluminum chassis installs on the included Street Glide amplifier rack without consuming unnecessary fairing space. FLX500.4 Amplifier Specifications Amplifier Model FLX500.4 Amplifier Type Four-channel Class-D amplifier without built-in DSP Output at 4Ω 95W RMS × 4 channels at 14.4V Output at 2Ω 125W RMS × 4 channels at 14.4V Bridged Output at 4Ω 250W RMS × 2 channels at 14.4V Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Fuse 50A Efficiency 80% Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 Input Sensitivity 0.2V–12V Turn-On Modes REM / DC / VOX Crossover Modes LPF / FULL / HPF Crossover Range 20Hz–20,000Hz Crossover Slopes 6 / 12 / 24 / 48dB per octave Dimensions with Brackets 5.2 × 4.9 × 2.0 inches / 131 × 125 × 51mm Chassis Dimensions 4.0 × 4.9 × 2.0 inches / 104 × 125 × 51mm CXX65.2 Street Glide Fairing Speakers Speaker Model CXX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch high-performance Pro Coaxial speaker Nominal Impedance 2Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Mid-Bass Voice Coil 1.4 inches / 35mm Tweeter Voice Coil 1 inch / 25mm Cone Kevlar Tweeter Dome PEI Magnet Neodymium Built-In Crossover 6dB Sensitivity 93dB Frequency Response 55Hz–20kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Warranty Two-year manufacturer warranty Rear-Speaker-Ready System Design The FLX500.4 provides four amplifier channels, but the supplied system includes only the two front fairing speakers. Cicada includes the 24HDRO harness so a compatible rear-speaker pair can be added without replacing the amplifier or rebuilding the factory-radio interface. Included for Expansion Two additional amplifier channels 24HDRO rear-output harness Factory-style harness connections Long speaker-wire leads for saddlebag routing Not Included Rear saddlebag speakers Saddlebag speaker adapters Cut-in speaker-lid hardware Rear speaker grilles or pods Expansion planning: Added rear speakers must be compatible with the FLX500.4 amplifier’s supported impedance, available output and crossover configuration. Factory A2B Radio Integration The NAV-TV ZEN-H interface extracts the factory digital A2B audio signal. The included Cicada harness routes that signal directly into the FLX500.4 through correctly pinned Molex connections. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Positive-locking automotive-grade connections Direct integration with compatible Cicada Audio amplifiers Compact routing inside the Street Glide fairing Standard non-DSP system configuration Installation and System Setup Mount the amplifier securely on the included 24HDAR-SG rack. Use the included HDPG8K power and ground wiring kit. Use a correctly rated fuse installed near the battery connection. Use the included A2B interface and Cicada amplifier harness. Confirm speaker mounting depth and grille clearance before assembly. Set the amplifier high-pass filters for the CXX65.2 speakers. Set amplifier gain using clean measured output. Do not exceed the 100-watt RMS rating of the front speakers. Secure all wiring against vibration, heat and sharp edges. Professional installation and system setup are recommended. Complete System Specifications Complete System SKU 24FLXCXX-4X2SG Vehicle Application Compatible 2024 and newer Harley-Davidson Street Glide Amplifier FLX500.4 four-channel amplifier without built-in DSP Amplifier Output at 2Ω 125W RMS × 4 channels at 14.4V Included Speaker Count Two Pro Coaxial speakers Included Speakers Two CXX65.2 6.5-inch speakers Speaker Impedance 2Ω per included speaker Loaded Amplifier Channels Two channels at 2Ω each Rear Amplifier Channels Available for compatible future speakers Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada harness Built-In DSP No Front Grilles 24CHDSGG Street Glide fairing grilles Power Wiring HDPG8K 8-AWG power and ground installation kit Rear Output Wiring 24HDRO plug-and-play harness Amplifier Rack 24HDAR-SG Street Glide amplifier rack Rear Speakers Included No Saddlebag Mounting Kit Included No Shopify Variants None Fitment and Ordering Notes Verify fitment: Confirm the exact Street Glide year, trim, factory radio, factory amplifier configuration, fairing speaker locations and electrical system before ordering. Designed for compatible 2024 and newer Street Glide motorcycles. The package includes two 2-ohm front speakers. The package does not include selectable speaker impedance options. Two amplifier channels power the included front speaker pair. The remaining two channels are available for future expansion. The rear-output harness is included. Rear speakers and saddlebag mounting components are not included. No saddlebag cutting is required for the supplied front-only system. Future rear installation requirements depend on the selected mounting system. The amplifier does not include built-in DSP. Professional installation and system setup are recommended. Best For Compatible 2024+ Street Glide front-speaker upgrades Riders starting with a two-speaker amplified system Factory A2B radios requiring aftermarket amplifier integration Efficient 2-ohm Pro Coaxial motorcycle speakers Systems using a compact standard four-channel amplifier Riders planning to add compatible rear speakers later Professional Street Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCXX-4X2SG FAQ What impedance are the included speakers? Both included CXX65.2 speakers have a nominal impedance of 2 ohms. How many speakers are included? The system includes two 6.5-inch CXX65.2 Pro Coaxial speakers for the Street Glide fairing. What load does the amplifier see? Each included speaker connects to its own amplifier channel, so each loaded front channel operates at a nominal 2-ohm load. Are all four amplifier channels used? No. The supplied system uses two channels for the front speakers. The remaining two channels are available for a compatible rear-speaker upgrade. How much power does the amplifier produce? The FLX500.4 produces 125 watts RMS × 4 at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. How much power can the speakers handle? Each CXX65.2 speaker is rated for 100 watts RMS and 200 watts maximum. Amplifier gain must be set correctly to protect the speakers. Does the amplifier include a DSP? No. The FLX500.4 is a standard four-channel amplifier without an integrated digital signal processor. Does the system integrate with the factory A2B radio? Yes. The package includes a NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are Street Glide fairing grilles included? Yes. The package includes the Cicada Audio 24CHDSGG aluminum fairing grille pair. Is the amplifier rack included? Yes. The package includes the 24HDAR-SG Street Glide amplifier rack and its mounting hardware. Is rear-speaker wiring included? Yes. The 24HDRO rear-output harness is included for a future rear-speaker upgrade. Are rear speakers included? No. Rear speakers and the required saddlebag mounting components must be purchased separately. Do the saddlebags need to be cut for this system? No saddlebag modification is required for the supplied front-only system. A future rear-speaker installation may require cutting or other modification depending on the selected mounting solution. Need Help Planning Your Street Glide System? Submit your Street Glide year, trim, factory audio package and future rear-speaker plans so Garage Bagger Stereo can verify fitment, electrical requirements and the correct expansion components for your motorcycle. Installation Services Request a Custom Build -
Cicada Audio 24FLXCXX-4X2RG 500W 2-Speaker System for 2024+ Road Glide
Vendor:Cicada AudioCOMPLETE 2024+ ROAD GLIDE FRONT AUDIO SYSTEM Cicada Audio 24FLXCXX-4X2RG 500W 2-Speaker Audio System The Cicada Audio 24FLXCXX-4X2RG is a complete front-fairing audio package for compatible 2024 and newer Harley-Davidson Road Glide motorcycles. It combines a compact four-channel amplifier, two high-efficiency 2-ohm Pro Coaxial speakers, factory A2B radio integration and Road Glide-specific installation components. The supplied system uses two amplifier channels for the front speaker pair. Two additional channels and the included rear-output harness remain available for a properly matched future rear-speaker upgrade. See Everything Included View Speaker Load Front Audio with Rear Expansion Support Designed for compatible 2024+ Road Glide motorcycles FLX500.4 compact four-channel Class-D amplifier 125 watts RMS × 4 channels at 2Ω Two CXX65.2 6.5-inch Pro Coaxial speakers Both included speakers are 2Ω Road Glide fairing grilles included NAV-TV ZEN-H A2B factory-radio integration Road Glide amplifier rack included 8-AWG amplifier power kit included Rear-output harness included for future expansion 24FLXCXX-4X2RG Complete System Overview This Cicada Audio package upgrades the two factory Road Glide fairing speaker locations while installing the amplifier, power wiring, A2B interface and vehicle-specific mounting hardware needed for a complete front audio system. One pair of CXX65.2 6.5-inch Pro Coaxial speakers installs behind the included Cicada-branded Road Glide fairing grilles. Each speaker has a nominal impedance of 2 ohms and connects to its own amplifier channel. The FLX500.4 provides four amplified channels. The supplied system uses two channels for the front speakers, while the 24HDRO harness supports future expansion to compatible rear speakers. Standard Non-DSP System Configuration FLX500.4 Power Amplifier This package uses the standard FLX500.4 four-channel Class-D amplifier. It delivers compact, efficient power but does not contain an integrated digital signal processor. NAV-TV ZEN-H A2B Integration The included interface kit converts the compatible factory A2B audio signal and connects it to the Cicada amplifier through purpose-built locking harness connections. No built-in DSP: The FLX500.4 does not provide digital equalization, time alignment or DSP limiting. Those functions require a separately purchased compatible processor when the system design calls for advanced tuning. Speaker Impedance and Amplifier Channel Load Front Left: 2Ω One CXX65.2 speaker connects to the assigned left-front amplifier channel and presents a nominal 2-ohm load. Front Right: 2Ω The second CXX65.2 speaker connects to the assigned right-front amplifier channel and presents a nominal 2-ohm load. Rear Channels: Available No rear speakers are included. The remaining two amplifier channels can power a properly matched future rear-speaker system. Included Speaker Count Two speakers / one pair Included Speaker Model CXX65.2 Speaker Impedance 2Ω per speaker Supplied Configuration One 2Ω speaker on each of two amplifier channels Remaining Amplifier Channels Two channels available for compatible rear-speaker expansion Supplied system load: Only two amplifier channels are loaded by the included speakers. Each loaded channel operates at a nominal 2 ohms. Rear-speaker impedance must be matched correctly before connecting additional speakers. Everything Included in the Complete System FLX500.4 — Four-Channel Amplifier One compact Class-D amplifier rated for 125 watts RMS × 4 channels at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. CXX65.2 — 6.5" Pro Coaxial Speakers One pair of 2-ohm CXX65.2 speakers for the Road Glide fairing. Each speaker is rated for 100 watts RMS and uses a Kevlar cone, PEI dome tweeter and built-in 6dB crossover. 24CHDRGG — Road Glide Fairing Grilles One pair of Cicada Audio-branded powder-coated steel grilles designed for compatible 2024 and newer Harley-Davidson Road Glide fairings. 24HDAR-RG — Road Glide Amplifier Rack Black-anodized aluminum amplifier rack that uses compatible OEM mounting locations and includes predrilled FLX amplifier mounting points and installation hardware. HDPG8K — 8-AWG Amplifier Power Kit Includes six-foot power and ground cables, braided covering, battery-side ring terminals, amplifier-side ferrules, remote trigger wiring and a waterproof Mini-ANL fuse holder. 24HDZENHCAKIT — NAV-TV ZEN-H A2B Interface NAV-TV ZEN-H factory A2B interface with a Cicada Audio direct-connect amplifier harness and correctly pinned locking Molex connections. 24HDRO — Rear Output Speaker Harness Plug-and-play rear-output harness with factory-style connectors, short extensions and longer speaker-wire leads for future rear-speaker installation. Rear-speaker ready: The rear-output harness and two additional amplifier channels are included. Rear speakers, saddlebag speaker adapters, speaker lids and cut-in hardware are sold separately. FLX500.4 Amplifier Power 125W × 4 at 2Ω The amplifier produces up to 125 watts RMS on each of its four channels when operating at 2 ohms and 14.4 volts. 95W × 4 at 4Ω It also supports four-channel operation with compatible 4-ohm speakers when the system is designed around that channel load. 250W × 2 Bridged The published bridged configuration is 250 watts RMS × 2 into compatible 4-ohm loads. Wide Input Range The 0.2V–12V gain range supports compatible factory interfaces, aftermarket radios, processors and high-output preamplifiers. Flexible Crossovers Selectable LPF, FULL and HPF modes provide 20Hz–20kHz adjustment with selectable 6, 12, 24 or 48dB-per-octave slopes. Compact Motorcycle Chassis The compact aluminum chassis installs on the included Road Glide amplifier rack without consuming unnecessary fairing space. FLX500.4 Amplifier Specifications Amplifier Model FLX500.4 Amplifier Type Four-channel Class-D amplifier without built-in DSP Output at 4Ω 95W RMS × 4 channels at 14.4V Output at 2Ω 125W RMS × 4 channels at 14.4V Bridged Output at 4Ω 250W RMS × 2 channels at 14.4V Operating Voltage 9V–16V Music Current Draw 50A Maximum Current Draw 80A Recommended Amplifier Fuse 50A according to current amplifier specifications Efficiency 80% Frequency Response 20Hz–20kHz ±3dB Signal-to-Noise Ratio 91dB A-weighted Damping Factor 200 THD + Noise 0.1% at 2Ω per channel at 10% rated power Input Sensitivity 0.2V–12V Turn-On Modes REM / DC / VOX Crossover Modes LPF / FULL / HPF Crossover Range 20Hz–20,000Hz Crossover Slopes 6 / 12 / 24 / 48dB per octave Dimensions with Brackets 5.2 × 4.9 × 2.0 inches / 131 × 125 × 51mm Chassis Dimensions 4.0 × 4.9 × 2.0 inches / 104 × 125 × 51mm CXX65.2 Road Glide Fairing Speakers Speaker Model CXX65.2 Quantity Two speakers / one pair Speaker Type 6.5-inch high-performance Pro Coaxial speaker Nominal Impedance 2Ω per speaker Power Handling 100W RMS / 200W maximum per speaker Mid-Bass Voice Coil 1.4 inches / 35mm Tweeter Voice Coil 1 inch / 25mm Cone Kevlar Tweeter Dome PEI Magnet N45H neodymium Built-In Crossover 6dB Sensitivity 93dB Frequency Response 55Hz–20kHz ±3dB Mounting Depth 2.26 inches / 57mm Mounting Diameter 5.43 inches / 138mm Weather Protection Rain or Shine all-weather design with UV-protected surfaces Warranty Two-year manufacturer warranty Road Glide-Specific Hardware 24CHDRGG Fairing Grilles The included powder-coated steel grilles are shaped for compatible 2024 and newer Road Glide fairings and feature Cicada Audio-branded emblems. 24HDAR-RG Amplifier Rack The black-anodized aluminum rack uses compatible OEM amplifier mounting locations and includes predrilled holes for FLX-style amplifiers. Factory A2B Radio Integration The NAV-TV ZEN-H interface extracts the compatible factory digital A2B audio signal. The included Cicada harness routes that signal directly into the FLX500.4 through correctly pinned locking connections. Designed for compatible 2024+ Harley-Davidson A2B systems No cutting or splicing of the factory signal harness Positive-locking automotive-grade connections Direct integration with compatible Cicada Audio amplifiers Compact routing inside the Road Glide fairing Standard non-DSP system configuration Rear-Speaker-Ready System Design The FLX500.4 provides four amplifier channels, but the supplied package includes only two front fairing speakers. The included 24HDRO harness prepares the system for compatible rear speakers without replacing the original amplifier or rebuilding the factory-radio interface. Included for Expansion Two additional amplifier channels 24HDRO rear-output harness Factory-style harness connections Extended speaker-wire leads for rear routing Not Included Rear saddlebag speakers Saddlebag speaker adapters Cut-in speaker-lid hardware Rear speaker grilles or pods Expansion planning: Added rear speakers must be compatible with the FLX500.4 amplifier’s supported impedance, available output and crossover configuration. Power Wiring and Fuse Selection Included HDPG8K Power Kit The supplied kit includes six-foot 8-AWG power and ground cables, battery ring terminals, amplifier ferrules, remote trigger wiring and a waterproof Mini-ANL fuse holder. Amplifier Fuse Specification Cicada’s current FLX500.4 specification recommends a 50-amp fuse for the amplifier. Verify the fuse before installation: Cicada currently lists 60-, 80- and 100-amp fuses with the HDPG8K kit while the FLX500.4 page recommends 50 amps. Do not automatically install a larger supplied fuse. Confirm the correct fuse value and wire protection with current Cicada guidance. Complete System Specifications Complete System SKU 24FLXCXX-4X2RG Vehicle Application Compatible 2024 and newer Harley-Davidson Road Glide Amplifier FLX500.4 four-channel amplifier without built-in DSP Amplifier Output at 2Ω 125W RMS × 4 channels at 14.4V Included Speaker Count Two Pro Coaxial speakers Included Speakers Two CXX65.2 6.5-inch speakers Speaker Impedance 2Ω per included speaker Loaded Amplifier Channels Two channels at 2Ω each Rear Amplifier Channels Available for compatible future speakers Factory-Radio Interface NAV-TV ZEN-H A2B interface with Cicada harness Built-In DSP No Front Grilles 24CHDRGG Road Glide fairing grilles Power Wiring HDPG8K 8-AWG power and ground installation kit Rear Output Wiring 24HDRO plug-and-play harness Amplifier Rack 24HDAR-RG Road Glide amplifier rack Rear Speakers Included No Saddlebag Mounting Kit Included No Shopify Variants None Fitment and Ordering Notes Verify fitment: Confirm the exact Road Glide year, trim, factory radio, factory amplifier configuration, fairing speaker locations and electrical system before ordering. Designed for compatible 2024 and newer Road Glide motorcycles. The package includes two 2-ohm front speakers. No selectable speaker-impedance variants are required. Two amplifier channels power the included front speaker pair. The remaining two channels are available for future expansion. The rear-output harness is included. Rear speakers and saddlebag mounting components are not included. No saddlebag cutting is required for the supplied front-only system. Future rear installation requirements depend on the selected mounting system. The amplifier does not include built-in DSP. Professional installation and system setup are recommended. Best For Compatible 2024+ Road Glide front-speaker upgrades Riders starting with a two-speaker amplified system Factory A2B radios requiring aftermarket amplifier integration Efficient 2-ohm Pro Coaxial motorcycle speakers Systems using a compact standard four-channel amplifier Riders planning to add compatible rear speakers later Professional Road Glide audio installations Related Motorcycle Audio Categories Cicada and 2024+ Harley Audio Shop Cicada Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers System Support Motorcycle Amplifiers Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries Cicada 24FLXCXX-4X2RG FAQ What impedance are the included speakers? Both included CXX65.2 speakers have a nominal impedance of 2 ohms. How many speakers are included? The system includes two 6.5-inch CXX65.2 Pro Coaxial speakers for the Road Glide fairing. What load does the amplifier see? Each included speaker connects to its own amplifier channel, so each loaded front channel operates at a nominal 2-ohm load. Are all four amplifier channels used? No. The supplied system uses two channels for the front speakers. The remaining two channels are available for a compatible rear-speaker upgrade. How much power does the amplifier produce? The FLX500.4 produces 125 watts RMS × 4 at 2 ohms, 95 watts RMS × 4 at 4 ohms or 250 watts RMS × 2 bridged at 4 ohms. How much power can the included speakers handle? Each CXX65.2 speaker is rated for 100 watts RMS and 200 watts maximum. Amplifier gain must be set correctly to protect the speakers. Does the amplifier include a DSP? No. The FLX500.4 is a standard four-channel amplifier without an integrated digital signal processor. Does the system integrate with the factory A2B radio? Yes. The package includes the NAV-TV ZEN-H A2B interface and Cicada Audio direct-connect amplifier harness. Are Road Glide fairing grilles included? Yes. The package includes the Cicada Audio 24CHDRGG powder-coated steel fairing grille pair. Is the amplifier rack included? Yes. The package includes the 24HDAR-RG Road Glide amplifier rack and its mounting hardware. Is rear-speaker wiring included? Yes. The 24HDRO rear-output harness is included for a future rear-speaker upgrade. Are rear speakers included? No. Rear speakers and their saddlebag mounting components must be purchased separately. Do the saddlebags need to be cut for this system? No saddlebag modification is required for the supplied front-only system. A future rear-speaker installation may require cutting or other modification depending on the selected mounting solution. What fuse should be used? Cicada’s current FLX500.4 specifications recommend a 50-amp fuse, but the included HDPG8K kit is listed with larger fuse values. Verify the correct final fuse with current Cicada guidance before installation. Need Help Planning Your Road Glide System? Garage Bagger Stereo can help verify Road Glide fitment, speaker impedance selection, amplifier matching, mounting clearance, power and speaker wiring, crossover setup and factory A2B signal integration before installation. Installation Services Request a Custom Build -
2023.5+ Harley-Davidson 4-Speaker Plug-and-Play Audio System | DS18 / Cerwin-Vega
Vendor:DS18 Motorcycle Audio2023.5+ HARLEY FOUR-SPEAKER AUDIO SYSTEM 2023.5+ Harley-Davidson 4-Speaker Plug-and-Play Audio System Upgrade a compatible late-model Harley-Davidson Road Glide or Street Glide with a complete front-and-rear audio package built around a DS18 four-channel amplifier, DS18 hybrid fairing speakers, Cerwin-Vega 6×9 saddlebag speakers and NAV-TV factory A2B integration. The system includes the primary signal integration, power wiring, rear-speaker wiring, front-speaker spacing and saddlebag lid conversion components needed to create a matched four-speaker motorcycle audio system. See Everything Included View Speaker Configuration Complete Front and Rear System Compatible Road Glide and Street Glide applications DS18 ION1600.4D four-channel Class-D amplifier Two DS18 PRO-HY6.4MSL 6.5-inch front speakers Two Cerwin-Vega ST692CX2 6×9 rear speakers Four dedicated amplifier channels NAV-TV ZEN-H factory A2B integration Cerwin-Vega saddlebag lid cut-in kit Cicada Audio 24HDRO rear-output harness 4-AWG amplifier power wiring Half-inch front-speaker spacers Typical listed lead time of 5–10 business days Complete 4-Speaker Plug-and-Play System Overview This Garage Bagger Stereo package creates a complete front-and-rear audio system for compatible 2023.5 and newer Harley-Davidson Touring motorcycles. Two DS18 hybrid speakers upgrade the front fairing, while two Cerwin-Vega Stroker 6×9 speakers add high-output rear audio through the factory saddlebag lids. The DS18 ION1600.4D supplies one dedicated amplifier channel to each speaker. The front speakers operate at a nominal 4-ohm load, and the rear speakers operate at a nominal 2-ohm load. The NAV-TV ZEN-H converts the compatible factory A2B audio signal into analog RCA outputs for the aftermarket amplifier. The Cicada Audio 24HDRO harness routes the rear amplifier output toward the saddlebags using factory-style connections. Plug-and-play does not mean cutting-free: The factory A2B signal interface and rear-output wiring use plug-and-play connections. Both compatible factory saddlebag lids must still be permanently cut to install the included Cerwin-Vega 6×9 speaker system. Road Glide and Street Glide Fitment Road Glide Applications Designed for compatible late-model Road Glide motorcycles equipped with the supported factory Harley-Davidson A2B audio platform. Road Glide sharknose fairing Two front 6.5-inch speaker locations Factory A2B radio integration Factory-style rear speaker output routing Street Glide Applications Designed for compatible late-model Street Glide motorcycles equipped with the supported factory Harley-Davidson A2B audio platform. Street Glide batwing fairing Two front 6.5-inch speaker locations Factory A2B radio integration Factory-style rear speaker output routing Verify the exact motorcycle: Confirm the year, model, trim, factory radio, factory amplifier, A2B configuration, saddlebag type, electrical locks and existing audio modifications before ordering. The 2023.5 designation primarily applies to the late-production CVO platform, while standard Road Glide and Street Glide applications begin with the redesigned 2024 platform. Everything Included in the Audio System DS18 ION1600.4D Amplifier One compact four-channel full-range Class-D amplifier rated for 240 watts RMS × 4 at 4 ohms and 400 watts RMS × 4 at 2 ohms. Two DS18 PRO-HY6.4MSL Speakers Two 6.5-inch, 4-ohm shallow hybrid fairing speakers with built-in titanium compression drivers and 150-watt RMS power handling. NAV-TV ZEN-H A2B Interface Factory A2B interface providing eight channels of analog RCA output for aftermarket amplifier integration. 4-AWG Amplifier Power Kit Heavy-gauge power and ground wiring with the primary terminals, fuse protection and installation hardware required for the amplifier. Half-Inch Front-Speaker Spacers Spacing components provide additional clearance for the DS18 hybrid speakers inside compatible factory fairing enclosures. Cerwin-Vega 6×9 Cut-In Lid Kit Saddlebag lid conversion system with adapters, protective grilles, cutting templates, plug-and-play wiring and required installation hardware. Two Cerwin-Vega ST692CX2 Speakers Two 2-ohm Stroker 6×9 two-way coaxial speakers with titanium-dome tweeters and 125-watt RMS power handling. Cicada Audio 24HDRO Harness Plug-and-play rear-output speaker harness with factory-style connectors, extensions and braided protective sheathing. Confirm current package contents: Review the active Shopify bundle and fulfillment notes before releasing the order if any amplifier wiring, spacers, brackets or lid-kit hardware have been substituted. Speaker Impedance and Amplifier Channel Configuration Front Fairing Channels Each DS18 PRO-HY6.4MSL front speaker presents a nominal 4-ohm load to its assigned amplifier channel. Rear Saddlebag Channels Each Cerwin-Vega ST692CX2 rear speaker presents a nominal 2-ohm load to its assigned amplifier channel. Channel 1 Front-left PRO-HY6.4MSL — 4Ω Channel 2 Front-right PRO-HY6.4MSL — 4Ω Channel 3 Rear-left ST692CX2 — 2Ω Channel 4 Rear-right ST692CX2 — 2Ω Amplifier Output at 4Ω 240W RMS per channel Amplifier Output at 2Ω 400W RMS per channel Front Speaker Rating 150W RMS per speaker Rear Speaker Rating 125W RMS per speaker Unused Amplifier Channels None Channel output must be limited carefully: The amplifier can produce substantially more continuous power than either included speaker model is rated to handle. Configure the front and rear channel pairs independently and set gain with measured clean output. DS18 ION1600.4D Four-Channel Amplifier The ION1600.4D is a compact full-range Class-D amplifier with selectable high-pass, low-pass and full-range operation. It includes low-level and high-level inputs, power and protection indicators, a clipping indicator and multiple electrical protection circuits. 240W × 4 at 4Ω Published output for the included 4-ohm front speaker channels. 400W × 4 at 2Ω Published output capability for the included 2-ohm rear channels. 800W × 2 Bridged Published bridged output into compatible 4-ohm loads. Adjustable Filtering Selectable LPF, HPF and full-range modes with variable crossover control. Clip Indicator Visual clipping indication assists with measured gain configuration. Compact Chassis Small dimensions support installation in space-conscious motorcycle builds. Model DS18 ION1600.4D Amplifier Type Four-channel full-range Class-D amplifier Output at 4Ω 240W RMS × 4 Output at 2Ω 400W RMS × 4 Bridged Output at 4Ω 800W RMS × 2 Frequency Response 10Hz–20kHz Signal-to-Noise Ratio Greater than 95dB Efficiency at 4Ω 88% Damping Factor 210 Total Harmonic Distortion 0.01% Input Range 0.2–6V Crossover Modes LPF / HPF / FULL Crossover Range 40Hz–2kHz Minimum Impedance 2Ω stereo / 4Ω bridged Power Input 4-AWG Published External Fuse 140A Cooling Fan Yes Dimensions 7.32 × 4.72 × 2 inches / 186 × 120 × 52mm Power-kit verification: Confirm that the supplied cable, fuse holder and final fuse value meet the ION1600.4D requirements before operating the system. DS18 PRO-HY6.4MSL Front Fairing Speakers Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange loudspeaker with a built-in 1-inch titanium compression driver. This hybrid design provides midrange projection and high-frequency output from a single fairing speaker location. Speaker Model DS18 PRO-HY6.4MSL Quantity Two speakers / one pair Nominal Size 6.5 inches / 165.1mm Nominal Impedance 4Ω per speaker Power Handling 150W RMS / 300W maximum per speaker Sensitivity 93dB, 1W / 1m Frequency Response 100Hz–20kHz Recommended High-Pass Crossover 140Hz Compression Driver 1-inch titanium diaphragm with neodymium magnet Cone Water-resistant treated paper Weather Rating IP65 Mounting Cutout 5.6 inches / 142mm Mounting Depth 2.82 inches / 72mm Check fairing clearance: Half-inch spacers are included, but pod modification, magnet-cap clearance work or additional spacing may still be required depending on the exact motorcycle and enclosure. Cerwin-Vega ST692CX2 Rear Saddlebag Speakers The rear system uses two Cerwin-Vega Stroker 6×9 two-way coaxial speakers. Each driver combines a polypropylene woofer cone with a titanium-dome tweeter and an internal crossover. Speaker Model Cerwin-Vega ST692CX2 Quantity Two speakers / one pair Speaker Size 6×9 inches Speaker Design Two-way coaxial speaker with titanium-dome tweeter Nominal Impedance 2Ω per speaker Power Handling 125W RMS / 250W maximum per speaker Sensitivity 90.5dB, 1W / 1m Frequency Response 45Hz–20kHz Woofer Cone Polypropylene Tweeter Diaphragm Titanium Internal Crossover Included Water Resistance IPX5 Mounting Depth 4.25 inches / 107.9mm Rear-channel output warning: The amplifier can produce up to 400 watts RMS per channel at 2 ohms, while each rear speaker is rated for 125 watts RMS. Rear gain and output voltage must be limited correctly. NAV-TV ZEN-H Factory A2B Integration The NAV-TV ZEN-H allows the factory Harley-Davidson head unit to feed aftermarket amplifiers through low-level analog RCA outputs while retaining supported factory controls. Eight RCA Outputs Provides eight channels of low-level analog audio output. Up to 5V RMS Supplies a strong low-level signal for compatible amplifiers. Factory Control Retention Retains supported volume, fader, balance, chimes and EQ presets. No system DSP is included: The standard ZEN-H and ION1600.4D do not provide advanced equalization, time alignment or output limiting. A compatible external DSP can be added when those functions are required. Cerwin-Vega Saddlebag Lid Conversion The cut-in lid system converts compatible factory saddlebag lids into 6×9 rear-speaker locations without requiring replacement painted lids. Cutting Templates Left and right templates support more accurate lid modification. Speaker Adapters Adapters secure the Cerwin-Vega 6×9 speakers to the modified lids. Protective Grilles Included grilles protect the speakers and complete the visible installation. Remove and inspect both saddlebag lids before cutting. Confirm the left and right template orientation. Check speaker depth and electrical-lock clearance. Confirm hinge, tether and weather-seal clearance. Route the 24HDRO wiring before final lid assembly. Protect and seal all cut edges after modification. Verify speaker polarity before reinstalling the lids. Permanent cutting required: Cutting both factory saddlebag lids is irreversible. Professional installation is recommended when the installer is not experienced with late-model Harley-Davidson lid conversions. Cicada Audio 24HDRO Rear-Speaker Harness The 24HDRO routes aftermarket rear-speaker output into compatible late-model Harley-Davidson saddlebags with factory-style connections. Compatible with supported 2024 and newer Harley-Davidson models Main harness with factory-style connectors Two short extensions and two longer speaker leads Color-coded wiring for easier identification Braided black protective sheathing No cutting or splicing of the compatible factory rear-output harness Gain, Crossover and Speaker Protection The amplifier has considerably more available power than the included front and rear speakers require. Proper setup is mandatory. Connect one speaker to each amplifier channel. Do not bridge any channels for the supplied four-speaker layout. Configure the front channels for high-pass operation. Use 140Hz as the published front-speaker high-pass reference. Configure an appropriate high-pass crossover for the rear 6×9 speakers. Set the front and rear gain controls independently. Use measured clean output voltage rather than setting gain by ear. Do not use amplifier gain as a volume control. Monitor the clipping indicator during setup. Reduce output immediately if distortion or mechanical noise occurs. Professional setup strongly recommended: Incorrect gain or crossover settings can damage the speakers quickly because of the amplifier’s available output. Complete System Specifications System Type Four-speaker front-and-rear plug-and-play audio system Vehicle Application Compatible 2023.5+ Harley-Davidson Road Glide and Street Glide Amplifier DS18 ION1600.4D four-channel Class-D amplifier Front Speakers Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers Front Impedance 4Ω per speaker Rear Speakers Two Cerwin-Vega ST692CX2 6×9 coaxial speakers Rear Impedance 2Ω per speaker Loaded Amplifier Channels All four channels Factory Signal Interface NAV-TV ZEN-H A2B interface Rear Speaker Wiring Cicada Audio 24HDRO plug-and-play harness Power Wiring 4-AWG amplifier power installation kit Front Speaker Spacers Half-inch spacers included Rear Mounting System Cerwin-Vega 6×9 saddlebag lid cut-in kit Built-In DSP No Saddlebag Cutting Required Yes Typical Listed Lead Time Approximately 5–10 business days Fitment and Ordering Notes Submit complete motorcycle information: Confirm the year, exact model, trim, factory radio, factory amplifier, A2B configuration, saddlebag type and current audio modifications. The system includes two front and two rear speakers. The front speakers are 4 ohms each. The rear speakers are 2 ohms each. All four amplifier channels are used. The factory signal interface is plug-and-play on compatible applications. The rear-output harness is plug-and-play on compatible applications. Both factory saddlebag lids require permanent cutting. Half-inch front-speaker spacers are included. Additional fairing clearance work may still be required. The system does not include built-in DSP. Correct front and rear gain settings are mandatory. Professional installation and setup are strongly recommended. Best For Compatible 2023.5+ Harley-Davidson complete audio upgrades 2024+ Road Glide front-and-rear speaker systems 2024+ Street Glide front-and-rear speaker systems Factory Skyline radio and A2B integration Four-channel amplified motorcycle audio systems Factory saddlebag lid conversions Professional Harley-Davidson audio installations Related Motorcycle Audio Categories 2023.5+ Harley Audio 2023.5+ / 2024+ Harley Plug-and-Play Kits Shop Motorcycle Speakers Motorcycle Amplifiers Amplifier and Signal Support Motorcycle Amplifier Parts Motorcycle DSP and Signal Integration Motorcycle Audio Batteries Installation Support Motorcycle Audio Installation in Taylors, SC Request a Custom Audio Build Motorcycle Audio Batteries 2023.5+ Harley 4-Speaker Audio System FAQ How many speakers are included? Four speakers are included: two DS18 6.5-inch hybrid fairing speakers and two Cerwin-Vega 6×9 saddlebag speakers. What impedance are the front speakers? Each DS18 front speaker has a nominal impedance of 4 ohms. What impedance are the rear speakers? Each Cerwin-Vega rear speaker has a nominal impedance of 2 ohms. Are all four amplifier channels used? Yes. Two channels power the front speakers and two channels power the rear speakers. How much power does the amplifier produce? The ION1600.4D produces 240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms or 800 watts RMS × 2 bridged at 4 ohms. Why is careful gain setup required? The amplifier can produce more continuous power than the included speakers are rated to handle. Front and rear gain settings must be configured independently and limited to safe clean output. What does the NAV-TV ZEN-H do? It converts the compatible factory Harley-Davidson A2B signal into analog RCA outputs for the aftermarket amplifier. Does the package include DSP? No. The standard ZEN-H and ION1600.4D do not provide advanced digital signal processing. Does the factory signal wiring need to be cut? The compatible NAV-TV A2B connection does not require cutting the primary factory signal wiring. Is rear-speaker wiring included? Yes. The system includes the Cicada Audio 24HDRO plug-and-play rear-output speaker harness. Do the saddlebag lids need to be cut? Yes. Both compatible factory saddlebag lids must be permanently cut for the Cerwin-Vega 6×9 installation. Are front-speaker spacers included? Yes. Half-inch front-speaker spacers are included. Are the speakers weather resistant? The DS18 front speakers are IP65 rated, and the Cerwin-Vega rear speakers are rated IPX5. Neither should be described as submersible. How long does the kit take to fulfill? The current listed lead time is approximately 5–10 business days, subject to component availability and motorcycle configuration. Need Help Matching This 4-Speaker Harley Audio System? Garage Bagger Stereo can help verify motorcycle fitment, front and rear speaker impedance selection, amplifier matching, fairing and saddlebag mounting, power and speaker wiring, and factory A2B signal integration before installation. Installation Services Request a Custom Build
Key Specifications
| Application | Harley Davidson and Indian touring motorcycles |
| Category Role | System completion and installation support |
| Component Types | Adapters, wiring, power accessories, mounting hardware |
| Design Focus | Electrical integrity, fitment accuracy, reliability |
| Use Case | Staged upgrades and full custom audio builds |
| Installation Level | Professional-grade motorcycle audio systems |
Specifications summarized from manufacturer technical data. Always verify compatibility and system requirements before installation.
Motorcycle Audio Parts and Accessories
Motorcycle parts and accessories are the supporting components that allow an audio system to function correctly, reliably, and safely. This collection includes purpose-built parts selected specifically for Harley Davidson and Indian touring motorcycles, where fitment accuracy and electrical integrity matter.
These components are not optional add-ons — they are required to complete professional-grade audio installations. From signal integration to power management and mounting hardware, each item in this collection addresses a specific requirement in motorcycle audio system design.
This collection supports a wide range of system needs, including:
• Audio integration adapters and signal interfaces
• Electrical and power-management accessories
• Mounting hardware and installation components
• Model-specific fitment and interface parts
Proper accessory selection prevents noise issues, voltage instability, improper mounting, and premature component failure. These parts ensure speakers, amplifiers, DSPs, and subwoofers operate as designed within the constraints of touring motorcycle platforms.
All products in this collection are vetted for compatibility with Harley and Indian motorcycles and align with professional installation standards. This category serves as a system-completion resource for both staged upgrades and full custom audio builds.
System Essentials
Motorcycle Amplifiers
Motorcycle Digital Sound Processors
Motorcycle Speaker Installation Parts
Custom Motorcycle Audio Builds
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.