-
Description
-
Reviews
Beyma CD10Fe & TD8060
1" 8-ohm Compression Driver with Horn
(Sold in pairs)
CD10Fe Compression Driver
- 1 in. (25mm) high-frequency compression driver
- 109 dB, 2.83V@1m sensitivity
- Improved moving assembly mechanical coupling for excellent power handling capabilities
- PM-4 polymer diaphragm with higher surface tension energy
- Ultra lightweight edge wound aluminum ribbon voice coil
- Aluminum cover
- Ferrite magnet
Throat diameter - 25 mm. 1 in.
Rated impedance - 8 ohms.
Minimum impedance - 5 ohms.
D.C. Resistance - 4.3 ohms.
Power capacity * - 70 w AES above 1.2 kHz
Program power - 140 w above 1.2 kHz
Sensitivity ** - 109 dB 2.83V @ 1m coupled to TD-164 prototype horn
Frequency range - 0.7 - 19 kHz
Recommended crossover - 1.2 kHz or higher (12 dB/oct. min.)
Voice coil diameter - 44.4 mm. 1.75 in.
Magnetic assembly weight - 1.2 kg. 2.64 lb.
Flux density - 1.65 T
BL factor - 6.6 N/A
TD-8060 Constant Directivity Horn
- Designed to be used with 1” compression drivers.
- Coverage angles of 80º in the horizontal plane and 60º in the vertical plane.
- Precise directivity control in the pass band
- Polycarbonate for lower resonance
- 2-Bolt on type for 1" high-frequency drivers
-
Lightweight 1 " horn that works well with lightweight neodymium high-frequency drivers
SPECIFICATIONS |
|
Type |
Constant Directivity |
Throat Size |
1" / 25mm |
Dispersion |
80°x 60° |
Lowest Rec. Crossover |
1500Hz |
Construction | Polycarbonate |
Net Weight |
.28 lbs. / .13kg |
MOUNTING INFORMATION |
|
Overall Width | 5.51" / 140mm |
Overall Height |
5.51" / 140mm |
Overall Depth | 2.65" / 67.4mm |
Cutout Width | 4.45" / 113mm |
Cutout Height | 5.12" / 130mm |
Mounting Type | Bolt On |
2 Holes Equally Spaced On Diameter | 3.0" / 76.2 mm |