-
Beyma AST05 - 1" Compression Bullet Tweeter (Pair)
Vendor:BeymaBeyma AST05 1" Compression Bullet Tweeter (Sold in pairs) BEYMA AST05 COMPRESSION BULLET TWEETER HANDLES 25 WATTS RMS & 50 WATTS PROGRAM SMALL PROFILE FOR TIGHT SPACES EXTREMELY SMOOTH SOUNDING WITH EXTENDED HIGHS UP TO 22KHZ LIGHTWEIGHT NEODYMIUM MAGNET & AN ATTRACTIVE-LOOKING ALUMINUM FINISH FOR ALL HIGH-QUALITY HIGH-FREQUENCY APPLICATIONS IN CAR SPEAKER SYSTEMS AVAILABLE IN 4 OHMS ONLY Specifications Impedance 4 ohms AES Power Rating 25 Watts Program Power 50 Watts Sensitivity (1W/1m) 107dB 1w @ 1m Frequency Response 2.5kHz - 22kHz Recommended Crossover 3.7 kHz or higher Voice Coil Diameter 1.02" / 25.8mm Mounting Information Overall Diameter 2.36" / 60mm Overall Depth 2.68" / 68mm Baffle Cutout Dimensions 1.69" / 43mm Bolt Circle Diameter 2.03" / 51.5mm Materials Diaphragm Aluminum Front Cover Aluminum Magnet Neodymium -
Beyma AST50B - 4 ohm Compression Tweeter (Pair)
Vendor:BeymaBeyma AST50B 4 ohm Compression Tweeter (Sold in Pairs) The Beyma AST-50 is a high-sensitivity compression tweeter. Its extended frequency range and Neodymium magnet make it ideal for high-frequency reproduction. High sensitivity: 98 dB Extended frequency range: 5 - 20 kHz Neodymium magnet Mounting Brackets and Capacitors Included; JB JFX Polypropylene Film Capacitor 3.3 F 630V -
Beyma CD10Fe & TD8060 - 1" Compression Driver / Horn Bundle (Pair)
Vendor:BeymaBeyma CD10Fe & TD8060 1" 8-ohm Compression Driver with Horn (Sold in pairs) CD10Fe Compression Driver 1 in. (25mm) high-frequency compression driver 109 dB, 2.83V@1m sensitivity Improved moving assembly mechanical coupling for excellent power handling capabilities PM-4 polymer diaphragm with higher surface tension energy Ultra lightweight edge wound aluminum ribbon voice coil Aluminum cover Ferrite magnet Throat diameter - 25 mm. 1 in. Rated impedance - 8 ohms. Minimum impedance - 5 ohms. D.C. Resistance - 4.3 ohms. Power capacity * - 70 w AES above 1.2 kHz Program power - 140 w above 1.2 kHz Sensitivity ** - 109 dB 2.83V @ 1m coupled to TD-164 prototype horn Frequency range - 0.7 - 19 kHz Recommended crossover - 1.2 kHz or higher (12 dB/oct. min.) Voice coil diameter - 44.4 mm. 1.75 in. Magnetic assembly weight - 1.2 kg. 2.64 lb. Flux density - 1.65 T BL factor - 6.6 N/A TD-8060 Constant Directivity Horn Designed to be used with 1” compression drivers. Coverage angles of 80º in the horizontal plane and 60º in the vertical plane. Precise directivity control in the pass band Polycarbonate for lower resonance 2-Bolt on type for 1" high-frequency drivers Lightweight 1 " horn that works well with lightweight neodymium high-frequency drivers SPECIFICATIONS Type Constant Directivity Throat Size 1" / 25mm Dispersion 80°x 60° Lowest Rec. Crossover 1500Hz Construction Polycarbonate Net Weight .28 lbs. / .13kg MOUNTING INFORMATION Overall Width 5.51" / 140mm Overall Height 5.51" / 140mm Overall Depth 2.65" / 67.4mm Cutout Width 4.45" / 113mm Cutout Height 5.12" / 130mm Mounting Type Bolt On 2 Holes Equally Spaced On Diameter 3.0" / 76.2 mm -
Beyma CP22MF - 1" Compression Bullet Tweeter
Vendor:BeymaBeyma CP22MF 1" Compression Bullet Tweeter THE BEYMA CP22MF HAS VERY SMOOTH HIGHS IN AN ATTRACTIVE BRUSHED ALUMINUM FINISH! THE NEW MODIFIED BEYMA CP22MF HIGH-FREQUENCY COMPRESSION BULLET TWEETER FERROFLUID COOLING FOR IMPROVED POWER HANDLING OF 35 WATTS RMS & 70 WATTS PROGRAM EXTREMELY SMOOTH AND CLEAN-SOUNDING HIGHS WITH A NARROW CONTROLLED DISPERSION EXCELLENT UPGRADE FOR A TWEETER IN A BASS GUITAR CABINET THAT WILL SOUND NOTICEABLY MORE NATURAL & SMOOTHER SOUNDING THAN A STANDARD TWEETER FOR ALL HIGH-QUALITY HIGH-FREQUENCY APPLICATIONS INCLUDING HI-FI, BASS GUITAR & SOUND REINFORCEMENT Specifications Impedance 8 ohms Minimum Impedance 8.5 ohms @ 9.0 khz D.C. Resistance 6.1 ohms AES Power Rating 35 Watts Program Power 70 Watts Sensitivity (1W/1m) 107dB SPL Frequency Response 4kHz - 20kHz Recommended Crossover 5.0 kHz or higher Dispersion (H x V) 40° Conical Voice Coil Diameter 1.5" / 37.6mm Magnetic Assembly Weight 2.64 lb. / 1.2 kg. Flux Density 1.55T BL Factor 5.2 N/A Mounting Information Overall Diameter 4" x 4" / 102mm x 102mm Overall Depth 2.79" / 71mm Baffle Cutout Dimensions 3.62" / 92mm Bolt Circle Diameter 4.21" / 107mm Net Weight 3.5 lb. / 1.6 kg. Shipping Weight 3.75 lb. / 1.7 kg. Materials Diaphragm Aluminum Voice Coil Edgewound Aluminum Ribbon Voice Coil Former Kapton Cooling Ferro Fluid Magnet Ferrite -
Beyma SQL60 Compression Driver/Horn (Pair)
Vendor:BeymaBeyma SQL60 Compression Driver Rated Impedance 4 ohm Diameter 1.93" Power Capacity 30W AES Sensitivity (dB) 97.5 Freq Range 5-20khz Coil Diameter 1" Crossover 5Khz Sold in pairs Check out the Beyma SQL60 on this 2018 Harley Davidson Screaming Eagle. -
Beyma WL3 - 1" Line Array Compression Driver (Pair)
Vendor:BeymaBeyma WL3 1" Line Array Compression Driver (Sold in pairs) THE BEYMA WL3 1" HIGH-FREQUENCY LINE ARRAY HIGH-FREQUENCY COMPRESSION DRIVER HANDLES 40 WATTS AES & 80 WATTS PROGRAM @ 1.5KHZ FEATURES A LIGHTWEIGHT NEODYMIUM MAGNET & WAVE GUIDE SYSTEM EXTREMELY SMOOTH SOUNDING LIKE ALL BEYMA PRO HF DRIVERS FOR ALL HIGH-QUALITY HIGH-FREQUENCY LINE ARRAY SYSTEMS FOR CONCERT, ARENA, THEATRES, DANCE CLUBS, SOUND REINFORCEMENT, ETC. Specifications Throat Diameter .8" / 20.8mm Impedance 8 ohms Minimum Impedance 5.5 ohms @ 4.5kHz D.C. Resistance 5.6 ohms AES Power Rating 40 Watts > above 1.5kHz Program Power 80 Watts > above 1.5kHz Sensitivity (1W/1m) 105dB 1w@1m w/ 90°x 5°horn Frequency Response 700Hz - 20kHz Recommended Crossover 1500 Hz or > @ 12dB/octave Voice Coil Diameter 1.75" / 44.4mm Magnetic Assembly Weight 1.32 lb. / .6 kg. Flux Density 1.8T BL Factor 8 N/A Mounting Information Overall Diameter 3.15" / 80mm Overall Depth 5.6" / 142mm Mounting (4) 6mm holes Net Weight 2.2 lb. / 1.0 kg. Materials Waveguide Aluminum Diaphragm Polyester Voice Coil Edgewound Aluminum Ribbon Voice Coil Former Kapton Magnet Neodymium -
SaleCicada Audio CHDRGGTK 15+ HD Road Glide Grills (Pair)
Vendor:Cicada AudioHD ROAD GLIDE “KIDNEY” GRILL W/TWEETER Motorcycle Compression Drivers and Horns CHDRGGTK – HD ROAD GLIDE “KIDNEY” GRILL W/TWEETER 200 WRMS / 400 MAX Power Handling- PAIR Neodymium High Energy/ Light Weight N35 Magnet structure Heavy Duty/ Die-cast Aluminum Basket 4 Ohm for increased durability 1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter Advanced Voice Coil Heat Sink Design for Better Heat Dissipation Frequency Response: 2Hz -20Khz+/-5dB High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V) 12dB Crossover with custom tooled/ Vented crossover case Custom Punched Road Glide Grills Mounting Depth: 0.75” / 18mm Mounting Diameter: 2” / 50mm SOLD IN MATCHED PAIRSSale -
SaleCicada Audio CHDSGGTK 14+ HD Street Glide Grills with Horns (Pair)
Vendor:Cicada AudioCicada Audio CHDSGGTK Street Glide Grills W/ Compression Drivers Motorcycle Compression Drivers and Horns Custom tooled Street Glide® Replacement Grill with our RR075T tweeter built-in. Designed for use with our CM65.2 or CM65.4 mid-bass drivers and sold in matched pairs. 100w RMS N35 Neo Magnet Motor 1.0″ – 4-ohm Voice Coil 107dB Sensitivity 2014 and up Harley Davidson OnlySale -
SaleCicada Audio RR05T Radiator Horn Tweeters
Vendor:Cicada AudioCicada Audio RR05T Motorcycle Compression Drivers and Horns The new Cicada Audio RR05T Ring radiator Tweeters are perfect for your bagger audio Harley. These speakers are a relatively easy fit. And Shallow. But still may need “Custom” installation. Making them PERFECT for custom coaxial mounting “in-grill” as it has been very popular as of late. SPECS: Rain or Shine™ all-weather performance design 40WRMS/80 MAX Neodymium Magnet Heavy Duty/Die-cast Aluminum Basket 4 Ohm for increased durability V9 Phase Plug for increased Dispersion and Increased Sound Quality (a Cicada® Exclusive!) Voice Coil: .075” / 19mm Tweeter Dome: Titanium Frequency Response: 3kHz-20Khz +/-3dB Sensitivity: 99dB 1 watt / 1 meter 7 kHz/12dB Crossover with custom tooled/ Vented crossover case Flush Mounting Depth: .85” / 21.7mm (measured from back of “bezel” mounting ring) Flush Mounting Diameter: 1.75” / 38.1mm Surface Mounting Protrusion: 1.1″ / 28mm Surface Mounting Diameter: 1.8″ / 46.1mm Multiple mounting options: Surface and Flush 2 year warranty SOLD ONLY IN PAIRSSale -
SaleCicada Audio RR075T Ring Radiator Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio RR075T Ring Radiator Horn Speaker Motorcycle Compression Drivers and Horns RR075T – 1” SHALLOW RING RADIATOR HORN TWEETER 200WRMS/400 MAX Power Handling- PAIR Neodymium High Energy/ Light Weight N35 Magnet structure Heavy Duty/ Die-cast Aluminum Basket 4 Ohm for increased durability 1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter Advanced Voice Coil Heat Sink Design for Better Heat Dissipation Frequency Response: 2Hz -20Khz+/-5dB High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V) 12dB Crossover with custom tooled/ Vented crossover case Mounting Depth: 0.75” / 18mm Mounting Diameter: 2” / 50mm SOLD ONLY IN PAIRSSale -
SaleCicada Audio RR1T 1" Ring Radiator Horn Speaker (Pair)
Vendor:Cicada AudioCicada Audio RR1T Motorcycle Compression Drivers and Horns The new Cicada Audio RR1T Ring radiator Tweeters are a perfect solution for 2014 and later baggers, Harley or otherwise. These speakers are relatively easy fit. And Shallow. But still may need “Custom” installation. Making them PERFECT for custom coaxial mounting “in-grill” as it has been very popular as of late. SPECS: 100WRMS/400 MAX Power Handling- PAIR Frequency Response: 2Hz -20Khz+/-5dB Neodymium High Energy/ Light Weight N35 Magnet structure Heavy Duty/ Die-cast Aluminum Basket 4 Ohm for increased durability V9 Phase Plug for increased Dispersion and Increased Sound Quality (a Cicada Exclusive!) 1.0” Aluminum Diaphragm High-Temp Voice Coil for Tweeter Advanced Voice Coil Heat Sink Design for Better Heat Dissipation High Sensitivity: 107dB 1W/1M Average (1W/1M – 2.83V) 12dB Crossover with custom tooled/ Vented crossover case Mounting Depth: 1.625” / 41.3mm (measured from back of “bezel” mounting ring) Mounting Diameter: 2” / 50mm SOLD ONLY IN PAIRSSale -
SaleCicada Audio RR3T 6×9″ Plate w/ 3″ Horn Tweeters (Pair)
Vendor:Cicada AudioCicada Audio RR3T 3” FOCUSED WAVEGUIDE HORN W/6X9” PLATE -CICADA AUDIO (R) EXCLUSIVE FEATURES: Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection of the elements Rain or Shine™ performance design Focused Waveguide custom tooled 6×9 Horn Assembly with 15 degree angled forward Matched Pair All Aluminum Cast Frame N35SH Neodymium Magnet Ultra-High Sensitivity Compatible with CHDLID 2014+ H-D® lid kit or any 6×9 Lid opening Replaceable Titanium Diaphragms 9k Passive Crossovers included SPECIFICATIONS: 3”- 8Ω Titanium High Temp Voice Coil 110 dB Sensitivity Power Handling: 300W RMS/600MAX Per Horn Frequency Response: 600Hz – 20kHz -/+5dB Mounting Depth: 3.5 inch/ 90mm Mounting Diameter: 6×9 inch/ 236x163mmSale
-
Beyma AST05 - 1" Compression Bullet Tweeter (Pair)
Vendor:BeymaBeyma AST05 1" Compression Bullet Tweeter (Sold in pairs) BEYMA AST05 COMPRESSION BULLET TWEETER HANDLES 25 WATTS RMS & 50 WATTS PROGRAM SMALL PROFILE FOR TIGHT SPACES EXTREMELY SMOOTH SOUNDING WITH EXTENDED HIGHS UP TO 22KHZ LIGHTWEIGHT NEODYMIUM MAGNET & AN ATTRACTIVE-LOOKING ALUMINUM FINISH FOR ALL HIGH-QUALITY HIGH-FREQUENCY APPLICATIONS IN CAR SPEAKER SYSTEMS AVAILABLE IN 4 OHMS ONLY Specifications Impedance 4 ohms AES Power Rating 25 Watts Program Power 50 Watts Sensitivity (1W/1m) 107dB 1w @ 1m Frequency Response 2.5kHz - 22kHz Recommended Crossover 3.7 kHz or higher Voice Coil Diameter 1.02" / 25.8mm Mounting Information Overall Diameter 2.36" / 60mm Overall Depth 2.68" / 68mm Baffle Cutout Dimensions 1.69" / 43mm Bolt Circle Diameter 2.03" / 51.5mm Materials Diaphragm Aluminum Front Cover Aluminum Magnet Neodymium -
Beyma AST50B - 4 ohm Compression Tweeter (Pair)
Vendor:BeymaBeyma AST50B 4 ohm Compression Tweeter (Sold in Pairs) The Beyma AST-50 is a high-sensitivity compression tweeter. Its extended frequency range and Neodymium magnet make it ideal for high-frequency reproduction. High sensitivity: 98 dB Extended frequency range: 5 - 20 kHz Neodymium magnet Mounting Brackets and Capacitors Included; JB JFX Polypropylene Film Capacitor 3.3 F 630V -
Beyma CD10Fe & TD8060 - 1" Compression Driver / Horn Bundle (Pair)
Vendor:BeymaBeyma CD10Fe & TD8060 1" 8-ohm Compression Driver with Horn (Sold in pairs) CD10Fe Compression Driver 1 in. (25mm) high-frequency compression driver 109 dB, 2.83V@1m sensitivity Improved moving assembly mechanical coupling for excellent power handling capabilities PM-4 polymer diaphragm with higher surface tension energy Ultra lightweight edge wound aluminum ribbon voice coil Aluminum cover Ferrite magnet Throat diameter - 25 mm. 1 in. Rated impedance - 8 ohms. Minimum impedance - 5 ohms. D.C. Resistance - 4.3 ohms. Power capacity * - 70 w AES above 1.2 kHz Program power - 140 w above 1.2 kHz Sensitivity ** - 109 dB 2.83V @ 1m coupled to TD-164 prototype horn Frequency range - 0.7 - 19 kHz Recommended crossover - 1.2 kHz or higher (12 dB/oct. min.) Voice coil diameter - 44.4 mm. 1.75 in. Magnetic assembly weight - 1.2 kg. 2.64 lb. Flux density - 1.65 T BL factor - 6.6 N/A TD-8060 Constant Directivity Horn Designed to be used with 1” compression drivers. Coverage angles of 80º in the horizontal plane and 60º in the vertical plane. Precise directivity control in the pass band Polycarbonate for lower resonance 2-Bolt on type for 1" high-frequency drivers Lightweight 1 " horn that works well with lightweight neodymium high-frequency drivers SPECIFICATIONS Type Constant Directivity Throat Size 1" / 25mm Dispersion 80°x 60° Lowest Rec. Crossover 1500Hz Construction Polycarbonate Net Weight .28 lbs. / .13kg MOUNTING INFORMATION Overall Width 5.51" / 140mm Overall Height 5.51" / 140mm Overall Depth 2.65" / 67.4mm Cutout Width 4.45" / 113mm Cutout Height 5.12" / 130mm Mounting Type Bolt On 2 Holes Equally Spaced On Diameter 3.0" / 76.2 mm -
Beyma CP22MF - 1" Compression Bullet Tweeter
Vendor:BeymaBeyma CP22MF 1" Compression Bullet Tweeter THE BEYMA CP22MF HAS VERY SMOOTH HIGHS IN AN ATTRACTIVE BRUSHED ALUMINUM FINISH! THE NEW MODIFIED BEYMA CP22MF HIGH-FREQUENCY COMPRESSION BULLET TWEETER FERROFLUID COOLING FOR IMPROVED POWER HANDLING OF 35 WATTS RMS & 70 WATTS PROGRAM EXTREMELY SMOOTH AND CLEAN-SOUNDING HIGHS WITH A NARROW CONTROLLED DISPERSION EXCELLENT UPGRADE FOR A TWEETER IN A BASS GUITAR CABINET THAT WILL SOUND NOTICEABLY MORE NATURAL & SMOOTHER SOUNDING THAN A STANDARD TWEETER FOR ALL HIGH-QUALITY HIGH-FREQUENCY APPLICATIONS INCLUDING HI-FI, BASS GUITAR & SOUND REINFORCEMENT Specifications Impedance 8 ohms Minimum Impedance 8.5 ohms @ 9.0 khz D.C. Resistance 6.1 ohms AES Power Rating 35 Watts Program Power 70 Watts Sensitivity (1W/1m) 107dB SPL Frequency Response 4kHz - 20kHz Recommended Crossover 5.0 kHz or higher Dispersion (H x V) 40° Conical Voice Coil Diameter 1.5" / 37.6mm Magnetic Assembly Weight 2.64 lb. / 1.2 kg. Flux Density 1.55T BL Factor 5.2 N/A Mounting Information Overall Diameter 4" x 4" / 102mm x 102mm Overall Depth 2.79" / 71mm Baffle Cutout Dimensions 3.62" / 92mm Bolt Circle Diameter 4.21" / 107mm Net Weight 3.5 lb. / 1.6 kg. Shipping Weight 3.75 lb. / 1.7 kg. Materials Diaphragm Aluminum Voice Coil Edgewound Aluminum Ribbon Voice Coil Former Kapton Cooling Ferro Fluid Magnet Ferrite
Upgrade Your Ride with DS18 Audio
Elevate your Harley Davidson’s audio system with DS18 audio speakers and amplifiers. Engineered for motorcycle enthusiasts who crave bold, crystal-clear sound, DS18 speakers bring your favorite music to life. Whether you're cruising down the highway or taking a scenic detour, DS18’s high-quality speakers deliver powerful audio to enhance every ride.
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.