-
Sale -
SaleCicada Audio FLX700.4PRO – 700W DSP Pro Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX700.4PRO — Compact 4-Channel Power with Built-In DSP Small chassis, big control. The FLX700.4PRO delivers clean power with an onboard 6-channel DSP (4 amplified + 2 pass-through), Bluetooth® streaming, and USB-C PC tuning. Designed for H-D® amp racks with multiple brackets, plus Molex® inputs for RCA or bike-specific termination. Why Riders Choose It Real output — 120×4 @ 4Ω, 175×4 @ 2Ω, or 350×2 bridged @ 4Ω (14.4V). 6-ch DSP onboard — tune crossovers/EQ on the bike; Bluetooth® audio built in. Bike-ready build — conformal-coated PCB in an extruded aluminum heatsink. Flexible turn-on — REM / DC / VOX with status & clipping LEDs. Premium I/O — 4 AWG power, 12 AWG speaker busbar-style terminals. Best With Front & rear pro speakers at 2–4Ω Bridged 4Ω pairs for lids/mid-bass OFC wiring, correct fusing, and solid grounds Factory radio or DSP signal — we’ll help map gains/filters Tell us your bike and speakers — we’ll pre-map crossovers and gains for highway-clear performance. Key Specifications RMS @ 4Ω (14.4V) 120 × 4 RMS @ 2Ω (14.4V) 175 × 4 Bridged @ 4Ω (14.4V) 350 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD + N (10% rated power) 0.1% @ 2Ω per ch SNR (A-wt) / Damping Factor 91 dB / 200 DSP / Tuning 6-ch DSP (4 amp + 2 pass), Bluetooth® audio, USB-C PC tuning Turn-On Modes REM / DC / VOX Operating Voltage 9 – 16 V Current Draw (Music / Max) 50 A / 80 A Recommended Fuse (Music) 50 A Efficiency ~80% Gain Range 0.2 – 12 V Dimensions (with brackets) 5.3″ × 4.9″ × 2.0″ (134 × 125 × 51 mm) Dimensions (chassis) 4.1″ × 4.9″ × 2.0″ (104 × 125 × 51 mm) Specs per Cicada Audio product page. Always verify wiring/impedance and set gains conservatively. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean OFC wiring and correct fusing On-bike DSP tuning for loud, clear highway sound Nationwide shipping & tech support Need Help? Call (864) 334-6131. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX1000.4 — 4‑Channel Motorcycle Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX1000.4 — Compact 4-Channel Power for Bagger Audio Big output in a small chassis. The FLX1000.4 feeds your front + rear speakers real power from a palm-size, bike-ready amp. Flexible HPF/LPF crossovers, REM/DC turn-on, and clean tuning make it a favorite for Harley-Davidson® and Indian® builds that need highway-clear sound without bulky gear. Why Riders Choose It Serious output — up to 254×4 @ 2Ω or 530×2 bridged @ 4Ω (14.4V). Compact chassis — 6.0″ × 4.9″ × 2.0″ fits behind fairings or in bags. Bike-ready — designed for the motorcycle environment. Flexible turn-on — REM / DC options for easy integration. On-board crossovers — HPF / FULL / LPF 30–300 Hz, 12 dB/oct. Shop Motorcycle Amplifiers Best With Front & rear speakers at 2–4Ω Bridged 4Ω pairs for lids or mid-bass OFC wiring with correct fusing and clean grounds Factory radio or DSP — we’ll map gains & filters Tell us your bike and speakers — we’ll set crossover points and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (12.5V / 14.4V) 150 × 4 / 168 × 4 RMS Power @ 2Ω (12.5V / 14.4V) 220 × 4 / 254 × 4 Bridged @ 4Ω (12.5V / 14.4V) 461 × 2 / 530 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor 91 dB / 200 Crossovers HPF / FULL / LPF: 30–300 Hz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 8 – 16 V Current Draw (Music / Max) 60 A / 116 A Recommended Fuse (Music) 120 A Efficiency ~79% Dimensions (L × W × H) 6.0″ × 4.9″ × 2.0″ (152 × 124 × 51 mm) Specs from Cicada’s product page; retailer listings corroborate ratings and dimensions. Always verify wiring/impedance before power-on. Frequently Asked Questions — Motorcycle Audio Can it run fronts and lids with one amp? Yes — many builds run four channels at 2–4Ω. Use HPF/LPF and proper gains for clean balance. Will it work with my factory radio? Yes. Use REM or DC turn-on and set gains carefully. Add a DSP if you need advanced EQ/time alignment. Can I bridge it for more power? Yes — bridge pairs at 4Ω for up to ~530 W × 2 (14.4V). Use LPF for mid-bass or small sub duty. What wiring and fuse do I need? Use OFC power/ground sized for current draw; fuse at the battery (120 A music rec.). Keep grounds short and solid. Is it motorcycle-ready? Yes — designed for bikes. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131 with your bike and speakers. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX1400.4 — 4‑Channel Motorcycle Amplifier
Vendor:Cicada AudioCicada Audio FLX1400.4 4-Channel Motorcycle Amplifier The Cicada Audio FLX1400.4 is a high-output 4-channel motorcycle amplifier built for Harley-Davidson bagger audio systems that need serious clean power, strong speaker control, and reliable highway-speed output. This amplifier is a strong fit for riders powering fairing speakers, saddlebag lid speakers, midbass, or bridged speaker pairs in a loud, clean, motorcycle-ready audio build. Cicada Amplifiers Motorcycle Amplifiers Shop Cicada Audio THE REFERENCE STANDARD Clean 4-Channel Power for Harley Bagger Audio Built for riders who need compact motorcycle amplifier power, flexible crossover control, 2Ω/4Ω speaker support, and strong output for real Harley audio systems. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio FLX1400.4 4-Channel Motorcycle Amplifier Amplifier Type High-output 4-channel motorcycle amplifier Best For Harley-Davidson bagger audio, fairing speakers, saddlebag lid speakers, midbass, and amplified motorcycle audio systems System Goal Clean power, stronger output, better speaker control, and louder highway-speed performance Speaker Support 2Ω and 4Ω speaker systems, depending on final wiring and system design Install Focus Compact motorcycle amplifier layout for Harley-Davidson Touring and custom bagger audio builds Always verify speaker impedance, wiring layout, fuse size, amplifier placement, gain structure, and system design before ordering or installing this amplifier. Built for High-Output Harley Audio Systems The Cicada FLX1400.4 is built for Harley-Davidson and motorcycle audio systems where factory power is not enough. It gives riders the headroom needed to drive upgraded 6.5" speakers, 6x9 speakers, pro coaxials, midbass drivers, and bridged speaker pairs with cleaner output and better control. This amplifier is a strong choice when the goal is louder vocals, stronger midbass, reduced distortion, and better open-air performance at speed. In a properly planned Harley bagger audio system, the FLX1400.4 can support front and rear speaker layouts, fairing and lid speaker upgrades, or bridged power for more aggressive output. Power and Performance Specifications RMS Power @ 4Ω Approximately 200 watts x 4 channels at 14.4V RMS Power @ 2Ω Approximately 350 watts x 4 channels at 14.4V Bridged Power @ 4Ω Approximately 700 watts x 2 channels at 14.4V Frequency Response 20Hz–20kHz +/-3dB THD < 0.5% at 1kHz Signal-to-Noise Ratio Approximately 91dB A-weighted Damping Factor Approximately 200 Crossovers HPF / FULL / LPF, 30Hz–300Hz, 12dB/octave Turn-On Modes REM / DC turn-on support Operating Voltage 8V–16V Current Draw Approximately 70A music / 130A max Recommended Fuse Approximately 150A for music use Best Use for the FLX1400.4 The FLX1400.4 is best used in Harley-Davidson bagger audio builds that need strong 4-channel amplifier power for fairing speakers, saddlebag lid speakers, midbass, or bridged speaker layouts. It is built for riders who want more output without giving up control or clarity. Designed Around Real Motorcycle Audio Motorcycle audio is different from car audio. Wind noise, road speed, speaker placement, electrical load, and limited mounting space all matter. This amplifier belongs in systems where the speaker choice, wiring, fusing, and tuning plan are matched correctly. Recommended System Planning To get the best performance from the Cicada FLX1400.4, match it with the right speakers, proper OFC power and ground wiring, correct battery-side fusing, clean signal input, and a real tuning plan. For Harley-Davidson Touring and custom bagger audio systems, amplifier power should always be planned around the speakers, impedance, charging system, mounting location, and final sound goal. If you are unsure whether this amplifier is the right choice for your Road Glide, Street Glide, CVO, Road King, Indian, or custom motorcycle audio build, contact Garage Bagger Stereo before ordering. Related Cicada & Motorcycle Audio Paths Build the system around the correct amplifier, speakers, DSP, wiring, and installation parts. These related collections help match the FLX1400.4 with the right Harley audio upgrade path. Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle amplifiers for Harley bagger audio systems Shop Cicada Audio speakers, amplifiers, DSP, and bagger audio upgrades Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle amplifier installation parts Need Help Choosing the Right Cicada Amplifier? Need help matching the Cicada FLX1400.4 to your speakers, bike, wiring, DSP, or complete Harley audio system? Call Garage Bagger Stereo or start a build consultation and we’ll help match the amplifier power, speaker layout, impedance, and tuning plan to your build. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio FLX1400.4P — 4‑Channel Motorcycle Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX1400.4P — High-Output 4-Channel Power for Bagger Audio More headroom, same compact footprint. The FLX1400.4P drives front + rear speakers with authority from a bike-ready chassis that tucks neatly behind fairings or in bags. Flexible HPF/LPF crossovers, REM/DC turn-on, and clean tuning make it a go-to for Harley-Davidson® and Indian® builds that demand highway-clear output. Why Riders Choose It Serious output — four strong channels or bridged pairs for lids/mid-bass. Compact chassis — mounts cleanly on touring platforms. Bike-ready — designed for the motorcycle environment. Flexible turn-on — REM / DC integration. On-board crossovers — HPF / FULL / LPF 30–300 Hz, 12 dB/oct. Shop Motorcycle Amplifiers Best With Front & rear speakers at 2–4Ω Bridged 4Ω pairs for lids or mid-bass OFC wiring, correct fusing, and solid grounds Factory radio or DSP — we’ll map gains & filters Tell us your bike and speakers — we’ll set crossover points and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (14.4V) ≈ 200 × 4 RMS Power @ 2Ω (14.4V) ≈ 350 × 4 Bridged @ 4Ω (14.4V) ≈ 700 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor ≈ 91 dB / 200 Crossovers HPF / FULL / LPF: 30–300 Hz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 8 – 16 V Current Draw (Music / Max) ≈ 70 A / 130 A Recommended Fuse (Music) ≈ 150 A Dimensions Compact motorcycle-grade chassis Always verify impedance, wiring, and fuse size for your exact setup. Frequently Asked Questions — Motorcycle Audio Can it power fronts and lids cleanly? Yes — run four channels at 2–4Ω for a balanced system, or bridge pairs at 4Ω for more output to lids or mid-bass. Will it work with my factory radio? Yes. Use REM or DC turn-on and set gains carefully. Add a DSP if you need advanced EQ/time alignment. What wiring and fuse do I need? Use OFC power/ground sized for current draw; fuse at the battery (≈150 A music). Keep grounds short and solid. Is it motorcycle-ready? Yes — designed for bikes. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131 with your bike and speakers. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX2000.4 — 4‑Channel Motorcycle Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX2000.4 — Compact 4-Channel Power for Bagger Audio Big-boy power, small footprint. The FLX2000.4 drives front + rear speakers with serious output from a compact, bike-ready chassis. With HPF/LPF crossovers, REM/DC turn-on, and clean tuning, it’s built for Harley-Davidson® and Indian® touring systems that need highway-clear volume without bulky gear. This amplifier is part of our Motorcycle Amplifiers collection, built for Harley Davidson and Indian touring motorcycles. Why Riders Choose It Serious output — up to 542×4 @ 2Ω or 1044×2 bridged @ 4Ω (14.4V). Compact chassis — 8.6″ × 4.9″ × 2.0″ tucks behind fairings/bags. Bike-ready — conformal-coated PCB, designed for motorcycles. Flexible turn-on — REM / DC integration. On-board crossovers — HPF / FULL / LPF 30–300 Hz, 12 dB/oct. Shop Motorcycle Amplifiers Best With Front & rear speakers at 2–4Ω Bridged 4Ω pairs for lids or mid-bass OFC wiring with 4 AWG power & correct fusing Factory radio or DSP — we’ll map gains & filters Tell us your bike and speakers — we’ll set crossover points and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (12.5V / 14.4V) 275 × 4 / 331 × 4 RMS Power @ 2Ω (12.5V / 14.4V) 450 × 4 / 542 × 4 Bridged @ 4Ω (12.5V / 14.4V) 866 × 2 / 1044 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor 91 dB / 200 Crossovers HPF / FULL / LPF: 30–300 Hz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 8 – 16 V Current Draw (Music / Max) 60 A / 240 A Recommended Fuse (Music) 120 A Efficiency ~79% Gain Range 0.2 – 12 V Dimensions (L × W × H) 8.6″ × 4.9″ × 2.0″ (218 × 124 × 51 mm) Specs from Cicada’s product page and manual; multiple dealers corroborate power ratings and crossover ranges. Always verify wiring/impedance before power-on. Frequently Asked Questions — Motorcycle Audio Can it run fronts and lids with one amp? Yes — many builds run four channels at 2–4Ω. Use HPF/LPF and proper gains for clean balance. Will it work with my factory radio? Yes. Use REM or DC turn-on and set gains carefully. Add a DSP if you need advanced EQ/time alignment. Can I bridge it for more power? Yes — bridge pairs at 4Ω for up to ~1044 W × 2 (14.4V). Use LPF for mid-bass duty as needed. What wiring and fuse do I need? Use OFC power/ground with 4 AWG power and fuse at the battery (120 A music). Keep grounds short and solid. Is it motorcycle-ready? Yes — designed for bikes with conformal-coated PCB. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131 with your bike and speakers. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX1600.1 — Mono Motorcycle Amplifier
Vendor:Cicada AudioMotorcycle Amplifier — Mono Cicada Audio FLX1600.1 — High-Output Mono Power for Bagger Audio One channel, no compromise. The FLX1600.1 is a mono full-range workhorse for high-output lids, mid-bass, or a compact sub. It packs serious wattage into a compact, bike-ready chassis with HPF/LPF control and clean integration on Harley-Davidson® and Indian® touring platforms. Why Riders Choose It Serious output — up to 1600 × 1 @ 2Ω (14.4V). Compact chassis — 8.6″ × 4.9″ × 2.0″ tucks behind fairings/bags. Bike-ready — element-ready design for motorcycle use. Flexible turn-on — REM / DC integration. On-board crossovers — HPF 10–80 Hz; LPF 80 Hz–20 kHz, 12 dB/oct. Shop Motorcycle Amplifiers Best With High-output lids or mid-bass at 2–4Ω Compact 4Ω subwoofer (enable LPF) OFC wiring & correct fusing; careful gain setup Factory radio or DSP front-end Tell us your bike and speakers — we’ll map crossovers, slopes, and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (12.5V / 14.4V) 670 × 1 / 950 × 1 RMS Power @ 2Ω (12.5V / 14.4V) 1250 × 1 / 1600 × 1 Frequency Response 10 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor 86 dB / 200 Crossovers HPF 10–80 Hz; LPF 80 Hz–20 kHz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 9 – 16 V Current Draw (Music / Max) 70 A / 140 A Recommended Fuse (Music) 100 A Efficiency ~80% Gain Range 0.2 – 12 V Dimensions (L × W × H) 8.6″ × 4.9″ × 2.0″ (218 × 124 × 51 mm) Specs from Cicada’s product page; multiple dealers corroborate power ratings and crossover ranges. Always verify wiring/impedance before power-on. Frequently Asked Questions — Motorcycle Audio Is this for subs or mids? Both. It’s a mono full-range design. Use HPF for mid-bass/lids or LPF for a compact sub. We’ll help you choose the right filter points. Will it work with my factory radio? Yes — use DC or REM turn-on and set gains carefully. Add DSP if you need advanced EQ or time alignment. What wiring and fuse should I use? Use OFC wire sized for current draw and fuse at the battery (100 A music). Keep grounds short with solid chassis bonding. Is it motorcycle-ready? Yes — element-ready construction. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131. We’ll map gains, filters, and wiring for your exact setup.Sale -
SaleCicada Audio FLX2500.1 — Mono Motorcycle Amplifier
Vendor:Cicada AudioMotorcycle Amplifier — Mono Cicada Audio FLX2500.1 — High-Output Mono Power for Bagger Audio One channel, maximum punch. The FLX2500.1 is a mono full-range workhorse for high-output lids, mid-bass, or a compact sub. It packs big wattage into a compact, bike-ready chassis, with HPF/LPF control and clean integration on Harley-Davidson® and Indian® touring platforms. Why Riders Choose It Serious output — up to 2500 × 1 @ 2Ω (14.4V). Compact chassis — 9.2″ × 4.9″ × 2.0″ tucks behind fairings/bags. Bike-ready — element-ready design for motorcycles. Flexible turn-on — REM / DC integration. On-board crossovers — HPF 10–80 Hz; LPF 80 Hz–20 kHz, 12 dB/oct. Cicada recommends a lithium battery upgrade and 2 AWG power wire for this model. Best With High-output lids or mid-bass at 2–4Ω Compact 4Ω subwoofer (enable LPF) OFC wiring & correct fusing; careful gain setup Factory radio or DSP front-end Tell us your bike and speakers — we’ll map crossovers, slopes, and gains for loud, clean highway performance. Key Specifications RMS Power @ 2Ω (14.4V) 2500 × 1 Frequency Response 10 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% @ 10% rated power) SNR (A-wt) / Damping Factor 86 dB / 200 Crossovers HPF 10–80 Hz; LPF 80 Hz–20 kHz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 9 – 16 V Current Draw (Music / Max) 80 A / 260 A Recommended Fuse (Music) 150 A Total Efficiency ~80% Gain Range 0.2 – 12 V Dimensions (L × W × H) 9.2″ × 4.9″ × 2.0″ (234 × 124 × 51 mm) Specs pulled from Cicada’s official page; multiple dealers corroborate power, dimensions, and fuse guidance. Always verify wiring/impedance before power-on. Frequently Asked Questions — Motorcycle Audio Is this for subs or mids? Both. It’s a mono full-range design. Use HPF for mid-bass/lids or LPF for a compact sub. We’ll help you choose the right filter points. Will it work with my factory radio? Yes — use DC or REM turn-on and set gains carefully. Add DSP if you need advanced EQ or time alignment. What wiring and battery should I use? Run 2 AWG power, fuse at the battery (150 A music), and use a lithium battery upgrade as recommended by Cicada. Is it motorcycle-ready? Yes — element-ready construction. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131. We’ll map gains, filters, and wiring for your exact setup.Sale -
Cicada Audio BFA5000.1 – Monoblock Class D Amplifier 5000W
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio BFA5000.1 — 5000W Monoblock Class D Serious bass power for serious builds. The BFA5000.1 drives demanding sub/enclosure setups with premium busbar I/O, 1/0 AWG power, and Molex® inputs for RCA or H-D® terminations. Conformal-coated PCB, extruded aluminum heatsink, and status/clipping LEDs keep it bike-ready and trackable. Why Riders Choose It Huge output — 3000W @ 4Ω or 5000W @ 2Ω (14.4V). Compact & robust — built for motorcycle environments. Smart controls — LPF and Subsonic filters with 12 dB/oct slopes. Premium connections — 1/0 AWG power, 12 AWG speaker busbar terminals. Dimensions (L x W x H): 11.7" x 7.0" x 2.6" 2-year warranty — confidence for high-output systems. Not intended for a standard amp rack in the fairing Best With High-efficiency subs or mid-bass enclosures Proper electrical upgrades (AGM/LiFePO₄, big 3) OFC power/ground and correct fusing DSP for system integration and limiters We’ll help set gain structure and filters to keep things loud and safe. Key Specifications RMS @ 4Ω (14.4V) 3000 × 1 RMS @ 2Ω (14.4V) 5000 × 1 Frequency Response 20 Hz – 250 Hz (±3 dB) SNR (A-wt) / Damping Factor 86 dB / 200 Crossovers LPF 20–250 Hz; Subsonic 20–50 Hz; 12 dB/oct Operating Voltage 9 – 16 V Current Draw (Music / Max) 200 A / 450 A Recommended Fuse (Music) 200 A Connectivity Molex® inputs; 1/0 AWG power; 12 AWG speaker busbar Specs per Cicada Audio product page. Verify wiring/impedance and ensure electrical upgrades for sustained output. Garage Bagger Stereo Advantage Bike-specific mounting & heat management OFC wiring, correct fusing, clean routing On-bike tuning and limiter setup Nationwide shipping & support Need Help? Call (864) 334-6131. We’ll spec wiring, fusing, and filters for your exact build. -
SaleCicada Audio CHX65 6.5" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX65 6.5" Pro Coax Horn Speakers Cicada Audio CHX65 6.5" Pro Coax Horn Speakers are built for Harley-Davidson bagger audio systems that need loud, clean, all-weather motorcycle sound at highway speed. Designed for high-output motorcycle audio, the CHX65 combines a 6.5" pro coaxial driver, horn-loaded clarity, Carbon Matrix Composite cone construction, and strong projection for riders who want more output from their Harley audio system. Shop Cicada Audio 6.5" Pro Coax Speakers Cicada Amplifiers THE REFERENCE STANDARD All-Weather 6.5" Cicada Speakers for Harley Audio Built for riders who want loud vocals, sharper clarity, stronger projection, and real motorcycle audio performance from a 6.5" Harley speaker location. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio CHX65 6.5" Pro Coax Horn Speakers Current Part Numbers CHX65.2 = 2Ω version / CHX65.4 = 4Ω version Speaker Size 6.5" Speaker Type Pro coaxial horn speaker Best For Harley-Davidson bagger audio, fairing speaker upgrades, high-output motorcycle audio systems, and amplified 6.5" speaker locations System Goal Louder vocals, stronger projection, clean open-air output, all-weather durability, and better highway-speed performance Sold As Pair Always verify impedance, speaker location, mounting depth, amplifier power, wiring, crossover setup, and final fitment before ordering for your Harley-Davidson audio build. Built for Harley-Davidson Bagger Audio The Cicada CHX65 is made for riders who want more than a basic replacement speaker. It is built for Harley-Davidson Touring, Road Glide, Street Glide, CVO, and custom bagger audio systems that need louder output, cleaner vocals, better clarity, and strong projection in real riding conditions. With a horn-loaded design, all-weather protection, high-efficiency output, and motorcycle-focused construction, the CHX65 is a strong fit for amplified Harley audio systems where the speaker needs to perform at speed, not just sound good in the garage. All-Weather Pro Coax Horn Design The CHX65 uses Cicada’s all-weather design with a Nanofram horn cover, Carbon Matrix Composite cone, neodymium magnet structure, aluminum tweeter diaphragm, and external crossover network. This makes it a strong speaker choice for Harley riders who want loud, clear, reliable motorcycle audio in real-world riding conditions. The included horn cover helps protect the compression driver, while the pro coaxial layout gives the speaker the projection and efficiency needed for open-air Harley audio builds. Specifications Speaker Size 6.5" pro coaxial horn driver Impedance Options CHX65.2 = 2Ω / CHX65.4 = 4Ω Power Handling 300 watts RMS / 600 watts max Frequency Response 70Hz–20kHz +/-4dB Sensitivity 92dB, 1W / 1M Midbass Voice Coil 2.0" / 51mm high-temperature voice coil Tweeter Voice Coil 1.4" / 35.56mm tweeter voice coil Cone Carbon Matrix Composite™ cone Tweeter Dome Aluminum tweeter diaphragm Magnet Neodymium magnet structure Crossover External 12dB custom-tooled, vented, encased crossover Tweeter Attenuation -3dB / -6dB heat-sink encased resistor pack Horn Cover Nanofram™ horn cover Weather Protection Exclusive Cicada all-weather design for rain protection, waterproofing, and UV protection Mounting Depth 2.64" / 67mm Mounting Diameter 5.67" / 144mm Best Use for the Cicada CHX65 The CHX65 is best used in Harley-Davidson bagger audio systems where the goal is loud 6.5" speaker output, strong vocal projection, clean highs, and better performance from fairing or custom speaker locations. Amplified System Recommended These speakers are intended for serious motorcycle audio systems. For best results, match the CHX65 with proper amplifier power, correct impedance selection, clean wiring, and a real tuning plan. Fitment and Installation Notes The Cicada CHX65 is designed for 2014+ Harley-Davidson factory-designed speaker locations, but every motorcycle audio build should be verified before ordering. Confirm speaker depth, mounting diameter, pod clearance, grille clearance, wiring path, impedance, and amplifier compatibility before installation. Some Harley-Davidson Road Glide, Street Glide, CVO, and custom bagger applications may require installation planning, speaker pod work, adapter rings, or system tuning depending on the exact bike and audio layout. Related Cicada & Motorcycle Audio Paths Build the system around the correct speaker, amplifier, DSP, wiring, and installation parts. These related collections help match the Cicada CHX65 with the right Harley audio upgrade path. Shop Motorcycle 6.5" Pro Coaxial Speakers Shop Cicada Audio motorcycle speakers, amplifiers, DSP, and bagger audio upgrades Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle speaker installation parts Need Help Choosing the Right Cicada Speakers? Need help matching the Cicada CHX65 to your Harley-Davidson bagger audio build? Call Garage Bagger Stereo or start a build consultation and we’ll help match the speaker, impedance, amplifier power, DSP, wiring, and installation path to your bike and sound goal. Call 864-334-6131 Start a Build ConsultationSale -
SaleCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioCicada Audio CHX69 6x9" Pro Coaxial Speaker (Pair) All Weather 6x9 Pro Coaxial Driver A Weatherproof Horn Cover is included on the compression driver. SPECIFICATIONS: 4Ω – 6X9-inch PRO coaxial horn driver Power handling: 400W RMS/800W MAX each Voice Coil: 2.5-inch/64mm Mid-bass & 1.75-inch/44mm Tweeter High-temperature design Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 92dB, 1W / 1M response 46Hz – 20kHz +/- 3dB Mounting Depth: 3.75-inch/96mm Mounting Diameter: 5.7-inch/145mm X 8.5-inch/216mm Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Rain or Shine™ all-weather performance design Available in 4 or 2Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient 1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat External 12dB crossover with optional -3/-6 tweeter resistor attenuatorSale -
SaleCicada Audio CHX8 8" Pro Coaxial Speaker (Pair)
Vendor:Cicada AudioAll Weather 8" Pro Coaxial Driver A Weatherproof Horn Cover is included on the compression driver. SPECIFICATIONS: 4Ω – 8″ PRO coaxial horn driver Power handling: 400W RMS/800W MAX each Voice Coils: 2.5-inch/64mm mid-bass & 1.75-inch/44mm Tweeter Tweeter Dome: Aluminum Crossover: 12dB external custom tooled, vented, encased crossover Tweeter Attenuation: -3/-6 dB heat sink encased resistor crossover Cone: Carbon Matrix Composite™ Magnet: Neodymium Sensitivity: 92dB, 1W / 1M response 46Hz – 20kHz +/- 3dB Mounting Depth: 3.3-inch/84mm Mounting Diameter: 7.2-inch/182mm FEATURES: Nanofram™ Horn Cover Exclusive Cicada All-Weather Design for protection from rain Rain or Shine™ all-weather performance design Available in 4- or 2-Ω versions Aluminum tweeter diaphragm material Brighter sound More efficient 1.75″ OFC copper wire tweeter voice coils offer great sound while generating less heat External 12dB crossover with optional -3/-6 tweeter resistor attenuator Carbon Matrix Composite™ (CMC™) cone Lightweight/rigid / high temp Maximized efficiency / super strongSale
-
Sale
-
Sale
Cicada Audio FLX700.4PRO – 700W DSP Pro Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX700.4PRO — Compact 4-Channel Power with Built-In DSP Small chassis, big control. The FLX700.4PRO delivers clean power with an onboard 6-channel DSP (4 amplified + 2 pass-through), Bluetooth® streaming, and USB-C PC tuning. Designed for H-D® amp racks with multiple brackets, plus Molex® inputs for RCA or bike-specific termination. Why Riders Choose It Real output — 120×4 @ 4Ω, 175×4 @ 2Ω, or 350×2 bridged @ 4Ω (14.4V). 6-ch DSP onboard — tune crossovers/EQ on the bike; Bluetooth® audio built in. Bike-ready build — conformal-coated PCB in an extruded aluminum heatsink. Flexible turn-on — REM / DC / VOX with status & clipping LEDs. Premium I/O — 4 AWG power, 12 AWG speaker busbar-style terminals. Best With Front & rear pro speakers at 2–4Ω Bridged 4Ω pairs for lids/mid-bass OFC wiring, correct fusing, and solid grounds Factory radio or DSP signal — we’ll help map gains/filters Tell us your bike and speakers — we’ll pre-map crossovers and gains for highway-clear performance. Key Specifications RMS @ 4Ω (14.4V) 120 × 4 RMS @ 2Ω (14.4V) 175 × 4 Bridged @ 4Ω (14.4V) 350 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD + N (10% rated power) 0.1% @ 2Ω per ch SNR (A-wt) / Damping Factor 91 dB / 200 DSP / Tuning 6-ch DSP (4 amp + 2 pass), Bluetooth® audio, USB-C PC tuning Turn-On Modes REM / DC / VOX Operating Voltage 9 – 16 V Current Draw (Music / Max) 50 A / 80 A Recommended Fuse (Music) 50 A Efficiency ~80% Gain Range 0.2 – 12 V Dimensions (with brackets) 5.3″ × 4.9″ × 2.0″ (134 × 125 × 51 mm) Dimensions (chassis) 4.1″ × 4.9″ × 2.0″ (104 × 125 × 51 mm) Specs per Cicada Audio product page. Always verify wiring/impedance and set gains conservatively. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean OFC wiring and correct fusing On-bike DSP tuning for loud, clear highway sound Nationwide shipping & tech support Need Help? Call (864) 334-6131. We’ll map gains, filters, and wiring for your exact setup.Sale -
Sale
Cicada Audio FLX1000.4 — 4‑Channel Motorcycle Amplifier
Vendor:Cicada AudioMotorcycle Amplifier Cicada Audio FLX1000.4 — Compact 4-Channel Power for Bagger Audio Big output in a small chassis. The FLX1000.4 feeds your front + rear speakers real power from a palm-size, bike-ready amp. Flexible HPF/LPF crossovers, REM/DC turn-on, and clean tuning make it a favorite for Harley-Davidson® and Indian® builds that need highway-clear sound without bulky gear. Why Riders Choose It Serious output — up to 254×4 @ 2Ω or 530×2 bridged @ 4Ω (14.4V). Compact chassis — 6.0″ × 4.9″ × 2.0″ fits behind fairings or in bags. Bike-ready — designed for the motorcycle environment. Flexible turn-on — REM / DC options for easy integration. On-board crossovers — HPF / FULL / LPF 30–300 Hz, 12 dB/oct. Shop Motorcycle Amplifiers Best With Front & rear speakers at 2–4Ω Bridged 4Ω pairs for lids or mid-bass OFC wiring with correct fusing and clean grounds Factory radio or DSP — we’ll map gains & filters Tell us your bike and speakers — we’ll set crossover points and gains for loud, clean highway performance. Key Specifications RMS Power @ 4Ω (12.5V / 14.4V) 150 × 4 / 168 × 4 RMS Power @ 2Ω (12.5V / 14.4V) 220 × 4 / 254 × 4 Bridged @ 4Ω (12.5V / 14.4V) 461 × 2 / 530 × 2 Frequency Response 20 Hz – 20 kHz (±3 dB) THD (1 kHz) < 0.5% (≈0.1% at 10% rated power) SNR (A-wt) / Damping Factor 91 dB / 200 Crossovers HPF / FULL / LPF: 30–300 Hz; 12 dB/oct Turn-On Modes REM / DC Operating Voltage 8 – 16 V Current Draw (Music / Max) 60 A / 116 A Recommended Fuse (Music) 120 A Efficiency ~79% Dimensions (L × W × H) 6.0″ × 4.9″ × 2.0″ (152 × 124 × 51 mm) Specs from Cicada’s product page; retailer listings corroborate ratings and dimensions. Always verify wiring/impedance before power-on. Frequently Asked Questions — Motorcycle Audio Can it run fronts and lids with one amp? Yes — many builds run four channels at 2–4Ω. Use HPF/LPF and proper gains for clean balance. Will it work with my factory radio? Yes. Use REM or DC turn-on and set gains carefully. Add a DSP if you need advanced EQ/time alignment. Can I bridge it for more power? Yes — bridge pairs at 4Ω for up to ~530 W × 2 (14.4V). Use LPF for mid-bass or small sub duty. What wiring and fuse do I need? Use OFC power/ground sized for current draw; fuse at the battery (120 A music rec.). Keep grounds short and solid. Is it motorcycle-ready? Yes — designed for bikes. Mount away from direct spray and protect cables from abrasion/heat. Garage Bagger Stereo Advantage Bike-specific amp placement & heat management Clean, serviceable OFC wiring and correct fusing On-bike tuning for loud, clear highway performance Nationwide shipping and tech support Need Help? Call us at (864) 334-6131 with your bike and speakers. We’ll map gains, filters, and wiring for your exact setup.Sale -
Sale
Cicada Audio FLX1400.4 — 4‑Channel Motorcycle Amplifier
Vendor:Cicada AudioCicada Audio FLX1400.4 4-Channel Motorcycle Amplifier The Cicada Audio FLX1400.4 is a high-output 4-channel motorcycle amplifier built for Harley-Davidson bagger audio systems that need serious clean power, strong speaker control, and reliable highway-speed output. This amplifier is a strong fit for riders powering fairing speakers, saddlebag lid speakers, midbass, or bridged speaker pairs in a loud, clean, motorcycle-ready audio build. Cicada Amplifiers Motorcycle Amplifiers Shop Cicada Audio THE REFERENCE STANDARD Clean 4-Channel Power for Harley Bagger Audio Built for riders who need compact motorcycle amplifier power, flexible crossover control, 2Ω/4Ω speaker support, and strong output for real Harley audio systems. Start a Build Consultation Call 864-334-6131 Key Product Details Product Cicada Audio FLX1400.4 4-Channel Motorcycle Amplifier Amplifier Type High-output 4-channel motorcycle amplifier Best For Harley-Davidson bagger audio, fairing speakers, saddlebag lid speakers, midbass, and amplified motorcycle audio systems System Goal Clean power, stronger output, better speaker control, and louder highway-speed performance Speaker Support 2Ω and 4Ω speaker systems, depending on final wiring and system design Install Focus Compact motorcycle amplifier layout for Harley-Davidson Touring and custom bagger audio builds Always verify speaker impedance, wiring layout, fuse size, amplifier placement, gain structure, and system design before ordering or installing this amplifier. Built for High-Output Harley Audio Systems The Cicada FLX1400.4 is built for Harley-Davidson and motorcycle audio systems where factory power is not enough. It gives riders the headroom needed to drive upgraded 6.5" speakers, 6x9 speakers, pro coaxials, midbass drivers, and bridged speaker pairs with cleaner output and better control. This amplifier is a strong choice when the goal is louder vocals, stronger midbass, reduced distortion, and better open-air performance at speed. In a properly planned Harley bagger audio system, the FLX1400.4 can support front and rear speaker layouts, fairing and lid speaker upgrades, or bridged power for more aggressive output. Power and Performance Specifications RMS Power @ 4Ω Approximately 200 watts x 4 channels at 14.4V RMS Power @ 2Ω Approximately 350 watts x 4 channels at 14.4V Bridged Power @ 4Ω Approximately 700 watts x 2 channels at 14.4V Frequency Response 20Hz–20kHz +/-3dB THD < 0.5% at 1kHz Signal-to-Noise Ratio Approximately 91dB A-weighted Damping Factor Approximately 200 Crossovers HPF / FULL / LPF, 30Hz–300Hz, 12dB/octave Turn-On Modes REM / DC turn-on support Operating Voltage 8V–16V Current Draw Approximately 70A music / 130A max Recommended Fuse Approximately 150A for music use Best Use for the FLX1400.4 The FLX1400.4 is best used in Harley-Davidson bagger audio builds that need strong 4-channel amplifier power for fairing speakers, saddlebag lid speakers, midbass, or bridged speaker layouts. It is built for riders who want more output without giving up control or clarity. Designed Around Real Motorcycle Audio Motorcycle audio is different from car audio. Wind noise, road speed, speaker placement, electrical load, and limited mounting space all matter. This amplifier belongs in systems where the speaker choice, wiring, fusing, and tuning plan are matched correctly. Recommended System Planning To get the best performance from the Cicada FLX1400.4, match it with the right speakers, proper OFC power and ground wiring, correct battery-side fusing, clean signal input, and a real tuning plan. For Harley-Davidson Touring and custom bagger audio systems, amplifier power should always be planned around the speakers, impedance, charging system, mounting location, and final sound goal. If you are unsure whether this amplifier is the right choice for your Road Glide, Street Glide, CVO, Road King, Indian, or custom motorcycle audio build, contact Garage Bagger Stereo before ordering. Related Cicada & Motorcycle Audio Paths Build the system around the correct amplifier, speakers, DSP, wiring, and installation parts. These related collections help match the FLX1400.4 with the right Harley audio upgrade path. Shop Cicada motorcycle amplifiers for Harley-Davidson audio builds Shop motorcycle amplifiers for Harley bagger audio systems Shop Cicada Audio speakers, amplifiers, DSP, and bagger audio upgrades Shop motorcycle DSP for Harley-Davidson audio tuning Shop motorcycle amplifier installation parts Need Help Choosing the Right Cicada Amplifier? Need help matching the Cicada FLX1400.4 to your speakers, bike, wiring, DSP, or complete Harley audio system? Call Garage Bagger Stereo or start a build consultation and we’ll help match the amplifier power, speaker layout, impedance, and tuning plan to your build. Call 864-334-6131 Start a Build ConsultationSale