Velocity RZP2000.6 — 2000W 6-Channel Motorcycle Amplifier
Velocity RZP2000.6 — 2000W 6-Channel Motorcycle Amplifier
Couldn't load pickup availability
Additional Payment Info
-
Description
-
Reviews
Velocity RZP2000.6 — 2000W 6-Channel Motorcycle Amplifier
The Velocity RZP2000.6 is a 6-channel motorcycle amplifier built for Harley-Davidson touring baggers. It puts out up to 350W RMS per channel at 2 ohms from a sealed, fanless aluminum chassis rated IP65, and it ships with an upgraded power and ground harness.
6-channel amp, IP65 sealed, harness included
350W RMS x 6 at 2 ohms, with 2 channels set aside for subwoofers.
- 200W RMS x 6 at 4Ω, 350W RMS x 6 at 2Ω
- 600W RMS x 3 bridged at 4Ω
- Front, rear and subwoofer gain groups
Key Product Details
| Product | Velocity RZP2000.6 6-Channel Motorcycle Amplifier |
| Brand | Velocity Speaker Design |
| Channels | 6 |
| Chassis | Sealed aluminum, fanless, IP65 rated |
| Included | Upgraded power and ground harness |
| Warranty | 2-year manufacturer warranty |
| Type | Universal amplifier, not plug and play |
This is a universal amplifier. Expect to add signal integration, mounting hardware and speaker wiring for your bike, and verify mounting space, electrical capacity and ventilation before ordering.
Planning a RZP2000.6 Install
The RZP2000.6 is rated at 200W RMS per channel at 4 ohms and 350W RMS per channel at 2 ohms. Two 4 ohm speakers wired in parallel present a 2 ohm load to a channel, and the power is shared between them. Plan your speaker loads around those ratings.
Channels 1 to 4 can run up to eight compatible mids and highs. Channels 5 and 6 are for suitable subwoofers, set to low-pass or full range. Bridged, it makes 600W RMS across 3 channel pairs at 4 ohms. Crossovers run high-pass, low-pass or full range from 40Hz to 400Hz, with independent front, rear and subwoofer gain. Inputs take high-level (1.2V to 10V) or low-level (0.7V to 6V) signal, and turn-on comes from a 12V remote or DC-offset sensing.
American Hard Bag lists it for larger builds, including systems using its Velocity modular bass system. A high-output system may need battery or charging upgrades, and gain and crossover settings must be set correctly.
Specifications
| RMS Power @ 4Ω | 200W x 6 |
| RMS Power @ 2Ω | 350W x 6 |
| RMS Power Bridged @ 4Ω | 600W x 3 |
| Rated Test Voltage | 14.4V DC |
| Frequency Response | 20Hz to 20kHz |
| THD | Under 0.1% |
| Signal-to-Noise Ratio | Above 85dB |
| Crossover | High-pass, low-pass, full range, 40Hz to 400Hz |
| Channels 5 and 6 | Low-pass or full range, selectable |
| Gain | Independent front, rear and subwoofer |
| Inputs | High-level (1.2V to 10V) or low-level (0.7V to 6V) |
| Remote Turn-On | 12V remote or DC-offset sensing |
| Protection | Thermal, overload and short-circuit |
| Weather Rating | IP65, sealed outboard electrical connections |
| Cooling | Fanless aluminum heat sink |
Related Paths
Velocity RZP2000.6 FAQ
How much power does the RZP2000.6 make?
It is rated at 200W RMS x 6 at 4 ohms, 350W RMS x 6 at 2 ohms, and 600W RMS x 3 bridged at 4 ohms.
Is the RZP2000.6 plug and play?
No. American Hard Bag lists it as a universal amplifier. Your install may need extra wiring, signal integration, mounting hardware or adapters.
How do the six channels split up?
Channels 1 to 4 can run up to eight compatible mids and highs. Channels 5 and 6 are for suitable subwoofers and can be set to low-pass or full range.
Is it waterproof?
It has a sealed aluminum chassis rated IP65, with fanless cooling and sealed outboard electrical connections.
What comes in the box?
The amplifier and an upgraded power and ground harness. Bike-specific integration wiring, mounting brackets and tuning are not included.
What bikes is it listed for?
American Hard Bag lists it for Street Glide, Road Glide, Electra Glide, Road King and other Harley-Davidson touring models, plus custom motorcycle and powersports builds.
What warranty does it have?
A 2-year manufacturer warranty against manufacturing defects.
Need Help Choosing?
Tell us your bike, model year and what you want to add, and we will confirm fitment and the right parts before you order.
Similar Products
RZP2000.6 or RZP1500.4: Pick by What You're Powering
Both Velocity amps make the same power per channel. The difference is how many channels you get and where they go.
- RZP2000.6: channels 1-4 run mids and highs, channels 5-6 run subs. One amp for a full fairing, lid and sub system.
- RZP1500.4: four channels for a four-speaker system or up to eight 4-ohm speakers. Add a sub and you need more channels.
Running bass in the bags? The six-channel is the one American Hard Bag lists with its Velocity drop-in 10" sub kit. Four speakers and no sub, the RZP1500.4 does the job.
What It Takes to Finish the Install
The box has the amp and the power and ground harness. Bike-specific signal wiring, mounting brackets and tuning are on you or on us.
- Plug and play: GBS builds the harness. 1998-2013 with an aftermarket radio, 2014-2023 with stock or aftermarket, 2024-Present with the stock radio.
- Power: six channels at 2 ohms pull hard. A drop-in lithium battery keeps voltage up at the light.
- Parts: fuses, wire and mounting in amplifier installation parts.
Want it done right the first time? Start a build and we spec the whole system.
More Velocity RZP2000.6 — 2000W 6-Channel Motorcycle Amplifier Questions
Should I get the RZP2000.6 or the RZP1500.4?
Get the RZP2000.6 if you're running subs with your mids and highs, since channels 5 and 6 are set up for subwoofers. The RZP1500.4 covers a four-speaker system or up to eight 4-ohm speakers with no dedicated sub channels.
Can GBS make the RZP2000.6 plug and play?
Yes. Out of the box it's a universal amp, but GBS builds the plug-and-play harness for 1998-2013 bikes with an aftermarket radio, 2014-2023 with a stock or aftermarket radio, and 2024-Present with the stock radio.
Do I need a battery upgrade for the RZP2000.6?
American Hard Bag notes a high-output system may need battery or charging upgrades. GBS carries drop-in lithium batteries for 1998-Present Harley touring bikes.