
-
Description
-
Reviews
2014-2023 Harley-Davidson 2-Speaker Plug and Play Audio System | DS18
A complete two-speaker audio system for a compatible 2014–2023 Harley-Davidson Road Glide or Street Glide, built around a DS18 ION1600.4D four-channel amplifier and two PRO-HY6.4MSL 6.5-inch hybrid speakers. Pick Road Glide or Street Glide so the amplifier mounting matches your fairing.
Front fairing system with two amplifier channels left open for rear speakers
The factory radio connects through a DS18 plug-and-play harness. Rear speakers, lids, adapters and rear wiring are not included.
- ION1600.4D: 240W RMS × 4 at 4Ω
- Two PRO-HY6.4MSL: 150W RMS, 4Ω each
- Road Glide or Street Glide option
Key Product Details
| System | Two-speaker plug-and-play motorcycle audio system |
| Fits | Compatible 2014–2023 Harley-Davidson Road Glide or Street Glide |
| Options | Road Glide or Street Glide (select before ordering) |
| Amplifier | DS18 ION1600.4D, 240W RMS × 4 at 4Ω |
| Front Speakers | Two DS18 PRO-HY6.4MSL 6.5 in hybrid, 4Ω each |
| Radio Interface | DS18 RY-HARNESS.HD factory-radio harness, four-channel RCA pre-output |
| Power Wiring | NVS 4-AWG amplifier power kit with quick disconnect |
| Amplifier Mounting | Road Glide- or Street Glide-specific rack |
| Channels | Two used, two available |
| Rear Speakers | Not included |
| Built-In DSP | No |
What Is Included
- DS18 ION1600.4D four-channel Class-D amplifier
- Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers, with a grille on each
- DS18 RY-HARNESS.HD factory-radio plug-and-play harness: four-channel RCA pre-output, OFC wiring, water-resistant construction
- NVS 4-AWG amplifier power and ground kit with quick-disconnect hardware
- Fairing-specific front-speaker spacers, mounting hardware and installation components for the selected model
- Road Glide- or Street Glide-specific amplifier rack
Not included: rear speakers, saddlebag speaker adapters, speaker lids, rear-speaker wiring and rear grilles unless added to the order.
Road Glide and Street Glide Configurations
Road Glide (sharknose) and Street Glide (batwing) fairings use different amplifier mounting layouts, so the option you select determines the rack and front-speaker components supplied.
Before ordering, confirm the model year, exact trim, fairing style, factory radio, factory amplifier configuration and any existing audio modifications. Bikes with a factory amplifier, CVO equipment, an aftermarket radio or earlier audio changes may need additional signal-integration work.
Installation and Setup Notes
The harness connects the factory radio signal without cutting the primary signal wiring, but the install still needs amplifier power wiring, speaker mounting, a secure amplifier mount and proper gain and crossover setup.
- Disconnect the battery before starting and fuse near the battery connection.
- Mount the amplifier securely with airflow and route wiring away from steering movement, sharp edges and heat.
- Connect one speaker to each of two channels, do not bridge, and set those channels to high-pass. DS18 publishes 140Hz as the high-pass reference for the PRO-HY6.4MSL.
- Speaker pod modification, magnet-cap clearance work or extra spacing may be needed depending on the exact bike and factory enclosure.
- Check battery and charging-system condition before high-output use.
Adding Rear Speakers Later
The two unused amplifier channels can power a matched rear pair. Plan the rear speakers around impedance, RMS power, mounting depth, wiring and crossover. For saddlebag speakers, see the Cerwin-Vega 2014-2023 6x9 cut-in lid kit and confirm it matches your amplifier channels.
DS18 ION1600.4D Amplifier Specifications
| Model | DS18 ION1600.4D |
| Type | Four-channel full-range Class-D |
| Output at 4Ω | 240W RMS × 4 |
| Output at 2Ω | 400W RMS × 4 |
| Bridged at 4Ω | 800W RMS × 2 |
| Frequency Response | 10Hz–20kHz |
| Signal-to-Noise Ratio | Greater than 95dB |
| Input Range | 0.2–6V |
| Crossover Modes | LPF / HPF / FULL, 40Hz–2kHz |
| Minimum Impedance | 2Ω stereo / 4Ω bridged |
| Power Input | 4-AWG |
| Published External Fuse | 140A |
| Cooling Fan | Yes |
| Dimensions | 7.32 × 4.72 × 2 in / 186 × 120 × 52mm |
| Built-In DSP | No |
DS18 PRO-HY6.4MSL Speaker Specifications
| Model | DS18 PRO-HY6.4MSL |
| Size | 6.5 in / 165.1mm, two-way hybrid |
| Impedance | 4Ω per speaker |
| Power Handling | 150W RMS / 300W max |
| Sensitivity | 97dB |
| Frequency Response | 100Hz–20kHz |
| Recommended High-Pass | 140Hz |
| Compression Driver | 1 in titanium diaphragm, neodymium |
| Cone | Water-resistant treated paper |
| Weather Rating | IP65 |
| Mounting Cutout | 5.6 in / 142mm |
| Mounting Depth | 2.82 in / 72mm |
Specifications per DS18.
Related Paths
DS18 2-Speaker Plug-and-Play System FAQ
Which bikes does this system fit?
It is for compatible 2014–2023 Harley-Davidson Road Glide and Street Glide motorcycles. Select the correct fairing style before ordering.
How many speakers are included and what is their impedance?
Two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers for the front fairing. Each has a nominal impedance of 4Ω.
Is the amplifier too powerful for the speakers?
The ION1600.4D is rated 240W RMS per channel at 4Ω and each speaker is rated 150W RMS. It can be used when gain, high-pass crossover and maximum clean output are set correctly.
Can I add rear speakers later?
Yes. Two amplifier channels remain open for a matched rear pair once the speakers, mounting parts, wiring and setup are added.
Does the system include DSP?
No. The ION1600.4D has gain and crossover controls but no built-in digital signal processing.
Does the factory radio wiring need to be cut?
The included RY-HARNESS.HD is a plug-and-play harness and the primary factory signal wiring is not cut.
Are the speakers weather resistant?
Yes. They are IP65 rated with a water-resistant treated paper cone. They are not submersible.
Will the speakers fit without modification?
It depends on the exact fairing enclosure and existing equipment. Pod modification, clearance work or extra spacing may be required.
Is the Road Glide rack the same as the Street Glide rack?
No. The two fairings need different amplifier mounting configurations, so select the right model before ordering.
Need Help Choosing?
Call or start a build consultation and we will confirm fitment, channel plan and wiring before you order.
