-
Nagy's Customs 10" 2024 Harley CVO Midbass Subwoofer Saddlebag Rings
Vendor:Nagys Customs10" SUBWOOFER ADAPTER RINGS Introducing the new 2024 Saddlebag speaker rings for the CVO. It works with stock Harley Davidson lids for 6x9, but some modifications will be required. These are CNC-molded 10" wheel side mount adapters with an 11" OD, 9" ID 5*, and a ½" mounting surface tilt to follow the flow more of the outside of the saddle bag. This allows a deeper speaker to be mounted with enough room for proper ventilation. The max mounting depth will vary by bag manufacturer. Fitment will also vary by bag manufacturer. Using a Quality bag or stock bag will achieve the best results. The inside diameter may have to be opened slightly as different speaker manufacturers are on the market. All new designs begin on 12/1/21, and the material comes with a speaker and ring mounting har war. Threaded Inserts for speakers ( 8 ) 10-24 Stainless steel hardware, 16 stainless steel outer ring har war. The drill bit and tool to put in inserts are optional and can be found in the hardware section. Panel bond not included. -
Nagy's Customs 10" 98-13 Harley Davidson Bag Seals (Pair)
Vendor:Nagys CustomsNagys Customs 98-13 Harley 10" Bag Seals/Toppers Take those 10" Nagy's speaker adapters and seal those bags off! Take some panel bond, bond them on, and boom, your bags are now sealed! Kit includes 1 set of toppers 1 piece of self-adhesive carpet to finish off the tops -
SaleNagy's Customs 10" 98-Current Harley Subwoofer Midbass Adapter Rings (Pair)
Vendor:Nagys CustomsALL NEW INJECTION MOLDED 10″ for Harley Davidson Saddlebags SUBWOOFER ADAPTER RINGS/WITH PANEL BOND SOLD IN PAIRS, SPEAKER AND RING MOUNTING HARDWARE INCLUDED! 10” SUB ADAPTER 98-CURRENT Kit includes: 90-minute panel bond 32 screws, 16 to hold the speaker to the bag, and 16 to hold the speaker to the Adapter. 1/8″ Drill Bit 2 Braces (purchase more bracing here) Instructions Add panel bond gun for $100 There are 3 options here you can get just the rings on option 1 These are an Injection molded 10” wheel side mount adapter with an 11.2” OD, 9” ID 5", and a ½” mounting surface tilt to follow the flow more of the outside of the saddle bag to allow a more profound speaker to be mounted with enough room for proper ventilation. Max mounting depth will vary by bag manufacturer. Fitment will also vary by bag manufacturer. Using a Quality bag or stock bag will achieve the best results. The inside diameter may have to be opened slightly as different speaker manufacturers are on the market. In this Kit, you will receive a tube of 220ml 90min NG90 panel bond, and mounting hardware. Applicator sold separately. If you choose the inserts, those can be purchased separately.Sale -
Nagy's Customs 10" 98-Current JL TW-3 Adapter Rings (Pair)
Vendor:Nagys Customs98-Current 10" JL TW-3 Adapter Rings Sold in pairs CNC molded 10” JL subwoofer adapter rings. These adapters have a setback larger than the 10” Subs and a 5" angle to clear the excursion of the speaker to ensure it doesn’t hit the shock at the top with a ½” mounting surface. With the ever-growing demand to add subs to your bag, this is a perfect solution to add some nice shallow mount subs and seal the top. The inside diameter may have to be opened slightly. This can be achieved by slightly sanding the mounting part of the adapter. Fitment will also vary by bag manufacture. Using a Quality bag or stock bag will achieve the best results. MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag. **due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results. Custom Made Parts, all sales are Final Sold in pairs -
Nagy's Customs 10" Quad Mount Adapter Rings 14+ (Pair)
Vendor:Nagys Customs10" Quad Mount Adapter Rings 14+ (Pair) Don't forget to add some Grillz, to protect your speakers!! Sold in pairs CNC molded. 2 10" Drivers in each bag, mounted from the outside of the bag. Fitment will also vary by bag manufacture. Using a Quality bag or stock bag will achieve the best results. MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag. **due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results. Custom Made Parts, all sales are FinalSold in pairs -
Nagy's Customs 10" Rear Subwoofer Adapter Rings 14+ (Pair)
Vendor:Nagys Customs10" Rear Subwoofer Adapter Rings Sold in pairs 2014-current Harley Davidson 10” Subwoofer Rear Mount Adapter Rings 14+ These are a CNC molded 10” wheel side mount adapter with a 10.7” OD, 9” ID 5*, and a ½” mounting surface tilt to follow the flow more of the outside of the saddle bag, to allow a deeper speaker to be mounted with enough room for proper ventilation. Max mounting depth will vary by bag manufacturer. Fitment will also vary by bag manufacturer. Using a Quality bag or stock bag will achieve the best results. The inside diameter may have to be opened slightly as there are different speaker manufacturers on the market. MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag. **due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results. Custom Made Parts, all sales are Final Sold in pairs -
Nagy's Customs 12" Universal Kicker Adapter Rings (Pair)
Vendor:Nagys CustomsNagys Customs 12" Universal Kicker Adapter Rings Kicker Solo-Baric 12" universal adapter ring There are tons of options with this from saddle bags, trike trunks, freewheelers, tour packs, etc. These have a depth of 2" and an overall depth of 2.5". They easily cut down to whatever depth you need It comes with mounting hardware, The Hardware kit with drill bit will ship on all retail orders. -
Nagy's Customs 6.5" Spacers (Pair)
Vendor:Nagys CustomsNagy's 6.5" Spacers Need a little more depth in your pak or lowers for a deeper speaker? Here is the perfect solution to get that deeper speaker in with little to no modification. -
Nagy's Customs 6x9 1/2" Spacers (Pair)
Vendor:Nagys CustomsNagy's 6x9 1/2" Spacers Need a little more depth in your pak or lowers for a deeper speaker? Here is the perfect solution to get that deeper speaker in with little to no modification. -
Nagy's Customs 8" 2024 & CVO Harley Midbass Subwoofer Saddlebag Adapter Rings
Vendor:Nagys Customs8" SUBWOOFER ADAPTER RINGS Introducing the new 2024 Saddlebag adapter rings for the CVO. These are CNC-molded 8” wheel side mount adapters. This allows a deeper speaker to be mounted with enough room for proper ventilation. The max mounting depth will vary by bag manufacturer. Fitment will also vary by bag manufacturer. Using a Quality bag or stock bag will achieve the best results. The inside diameter may have to be opened slightly as different speaker manufacturers are on the market. -
Nagy's Customs 8" 98-Current Kicker Solo-Baric Adapter Rings (Pair)
Vendor:Nagys CustomsNagy's Customs 8" Kicker Solo-Baric Adapter Ring Kit Get that Square bass in your bags!! Fits all years 98-current Square Matters Upgrade your bike's audio system from factory speakers with these 8 inch speaker adapter rings. The Solo-Baric L7S's square sub design delivers dependable bass - even when pushed to the limit. Dual voice coils with high-temp copper windings easily handle intense heat and power levels for clean, clear bass anytime. Be sure and seal the bags with the "Closeout Kit" below. **Closeouts for sealing the bags not included, choose when checking out below. These mounting brackets are a CNC molded 10” wheel side mount speaker adapter with a 10.7” OD, 9” ID 5*, and a ½” mounting surface tilt to follow the flow more of the outside of the saddle bag, to allow a deeper rear speaker to be mounted with enough room for proper ventilation. Max mounting depth will vary by bag manufacture. Fitment of this adapter kit will also vary by bag manufacture. Using a Quality bag or stock bag will achieve the best results. The inside diameter may have to be opened slightly as there are different speaker manufactures on the market. HOLES MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag. **due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results. Custom Made Motorcycle Aftermarket Parts, all sales are Final Sold in pairs -
Nagy's Customs 8" Saddle Bag Braces
Vendor:Nagys CustomsNagys Customs Saddle Bag Braces Sold in pairs Made from polyurethane, it will not crack, split, or break, is waterproof and weatherproof, is paintable, works well with panel bond to bond to the bags or rings, and Comes in 8". These are not exact sizes, but they are very close. Some may be a little over or just a little under. Easily trimmed with a chop saw or table saw to the desired length. Must be prepped by sanding the areas touching for the maximum bonding between materials
-
SaleCicada Audio CHD8HD 8" Plastic Bag Divider (PAIR)
Vendor:Cicada AudioCicada Audio CHD8HD 8" CH/CHX/CM Plastic Bag Divider CHD8HD Custom Molded High-Grade ABS CH/CHX/CM series 8″ Plastic Dividers for Saddle Bags to be used with 8″ or 10″ Pro Midbass Drivers Sold in pairs onlySale -
Cicada Audio SPACER65-0.5 6.5" 1/2 Inch Spacer Rings
Vendor:Cicada AudioCicada Audio SPACER65-0.5 6.5" 1/2 Inch Spacer Rings SPACER65-05 6-1/2 inch spacer Gives 1/2 inch extra depth Works with all 6.5″ Cicada Audio(r) Speakers One pair of adapters included in each package -
Cicada Audio SPACER65-0.75 6.5" 3/4 Inch Spacer Rings
Vendor:Cicada AudioCicada Audio SPACER65-0.75 6.5" 3/4 Inch Spacer Rings SPACER65-075 6-1/2 inch spacer Gives 3/4 inch extra depth Works with all 6.5″ Cicada Audio(r) Speakers One pair of adapters included in each package -
Curly's Inc Speaker Adapter Plates 6×9 TO 6.5″ (pair)
Vendor:Curly's Inc6x9 to 6.5 lid adapter kit Speaker adapter plates allow you to run 6.5″ speakers in a 6 x 9 lid. Material: Steel Sold in Set of 2 Plates Current lid time 5-7 business days Some modification may be required to plate or lid
