No products found
Use fewer filters or remove all
-
KICKER KMTC9 HLCD 9" Coaxial Tower System
Vendor:KickerKICKER KMTC9 HLCD 9" Coaxial Tower System — sold as a pair. Smooth, far‑reaching sound with a horn‑loaded compression driver and rugged, true‑marine build. LED grilles and 354° tool‑less rotation make install and aiming simple. Highlights Horn‑loaded 1.4" titanium compression driver 9" polypropylene woofer with Santoprene® surround 4‑ohm per enclosure; 150–300 W RMS (600 W peak) Near full‑rotation swivel with locking cam/toggle clamp 316L stainless hardware; clamp fits 1.5"–3.25" tubing Seven‑color LED grilles (upgradeable with KMLC remote) Meets/exceeds ASTM G154 UV & B117 salt/fog standards Specifications Woofer 9" (23 cm) HF Driver 1.4" titanium horn compression Impedance 4 Ω Recommended Power (RMS) 150–300 W per speaker Peak Power 600 W per speaker Sensitivity 92 dB (1W/1m) Frequency Response 20 Hz – 20 kHz LED Lighting Yes (multi‑color) Specs summarized from KICKER’s KMTC9 product pages and manual. -
Kicker KMTCXL65 Horn-Loaded HLCD Tower System
Vendor:KickerKICKER All Weather KMTCXL65 HLCD Tower System (Black or White) Award-winning KMXL Horn-Loaded Speakers, dropped inside a pair of tough black or white KICKER tower cans for any all-weather use. Loud, clear, and convenient. Upgradable to 20 colors and 19 lighting modes with the KICKER LED Remote. General Features: Award-Winning, High-Output, Compression-Horn Design Powerful Lightweight Neodymium Motor Incredible Loud, Smooth Volume from 8-inch or 6.5-inch Drivers Customizable LED Lighting to Match Theme or Mood* UV-Resistant Polymer Enclosure Cans in Black or White Revolutionary 354-Degree Can Rotation and Mounting Bracket Stainless-Steel Mounting Clamp Fits Most Tubing Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure Specifications: Woofers (in, mm): 6.5, 165 Horn Loaded Compression Drivers (in, mm): 1-1/4, 32 Rated Impedance (Ohms) :4 Recommended Amp Power (watts RMS): 15-150 Peak Power (watts): 300 Sensitivity (1W, 1m): 90 Frequency Response (Hz): 90-20k Height including bracket (in, cm): 11-1/8, 28.4 Depth (in, cm): 9-3/4, 24.7 Diameter (in, cm): 7, 17.8 LED Lighting: Yes -
Kicker KMTCXL8 HLCD Tower System (White or Black)
Vendor:KickerKICKER KMTCXL8 8" Horn-Loaded Marine Tower Speakers (Pair) Garage Bagger Stereo Marine Series. If you need throw for wake surfing and clean vocals that cut across open water, the KMTCXL8 delivers. These 8-inch, horn-loaded tower cans pack real marine hardware — UV-treated ASA enclosures, stainless mounting, and RGB lighting — all tuned for loud, clear sound without getting harsh. Built for boats that actually get used. Why We Like Them (Installer POV) Horn-Loaded clarity + distance — 1-1/4" aluminum compression driver stays articulate at surfing range. Real marine build — UV-treated, splash-resistant ASA cans and stainless hardware for salt or fresh water duty. Smart mounting — quick-adjust swivel lever lets us aim the pods where your riders are, fast. RGB lighting ready — wire straight or use the Kicker KMLC controller for colors/patterns. Plays nice with amps — 4-ohm load with strong sensitivity so you get loud without crazy power draw. Technical Specs Model KMTCXL8 (51KMTCXL8) Woofer Size 8 in (200 mm) Tweeter 1-1/4 in (32 mm) aluminum compression driver & horn Impedance 4 Ω Sensitivity 93 dB (1W/1m) Freq. Response 60 Hz – 20 kHz Power Peak: 500 W per pair • Recommended amp power: 15–250 W RMS per pair High-Pass (for best performance) 80 Hz @ 12 dB/oct Enclosure Diameter/Width 8-3/16 in (20.8 cm) Enclosure Depth 11-5/16 in (28.7 cm) Height (bottom of roll bar → enclosure bottom) 9-7/16 in (24 cm) Height (bracket top → enclosure bottom) 11-1/2 in (29.2 cm) Construction UV-treated ASA enclosure • Polypropylene + Carbon-Fiber cone • Treated-cloth surround Mounting Stainless-steel brackets with quick-adjust swivel lever; fits most tower tube sizes Lighting RGB LEDs (Kicker KMLC controller optional) Warranty 3-Year (when purchased through an Authorized Kicker Dealer) What’s in the Box (2) KMTCXL8 tower enclosures (left/right) Stainless swivel mounting brackets & hardware Pre-wired RGB pigtails Quick-start / owner’s manual Install Notes (from our bench) Pre-drill a 5/8" (16 mm) wire pass-through in the tube; align with the lower bracket for a clean run. LED wiring: Black = +12V; Red/Green/Blue = grounds. Use a 2-amp fuse within 7" of battery if hard-wiring. Always set a high-pass filter at ~80 Hz (12 dB/oct) to keep the pods clean at volume and preserve amp headroom. Marine / Boat Audio FAQ Will these hold up in salt water? Yes. The ASA enclosures are UV-treated and splash-resistant, and all external hardware is stainless. Rinse with fresh water after salty days and you’re golden. How much power do I really need? They get loud on quality power. We recommend a clean marine amp that can deliver somewhere in the 150–250 W RMS per pair range into 4-ohms. More power is fine if it’s clean and you use the 80 Hz high-pass. Do they swivel so I can aim toward riders? Yes. The quick-adjust swivel lever makes it simple to aim left/right after tightening, so you can focus output at the swim platform or wake. What tube sizes do they fit? The stainless mounting system fits most tower tube diameters. If you’re not sure on your tube size, tell us your boat and tower brand and we’ll confirm fit before we ship. How do the LEDs hook up? Can I control colors? Out of the box you can wire fixed colors (Black = +12V, RGB wires = grounds). For multi-color control and effects, add the Kicker KMLC lighting controller. What about pairing with subs and cabin speakers? We can match the KMTCXL8 with KICKER marine coaxials and a sealed or free-air marine sub stage so the tower pods play clean mid/high while the sub handles low-end. Warranty? Three-year manufacturer warranty when purchased through an Authorized Kicker Dealer — that’s us. Marine Audio Highlights Horn-loaded tower speakers for wake surf and tow-sports UV-treated, splash-resistant ASA enclosures with stainless hardware RGB lighting ready; compatible with KMLC controller Designed for saltwater and freshwater boats: wake, surf, cruiser, pontoon Pro install available by Garage Bagger Stereo Marine  -
KICKER KMTDC65 Dual 6.5" Coaxial Tower System
Vendor:KickerKICKER KMTDC65 Dual 6.5" Coaxial Tower System (Black or White) Sold as a pair. Enjoy near full‑rotation aiming, built‑in RGB LEDs, and rugged, UV‑resistant construction for true marine use. Highlights Two‑ohms per enclosure 3/4" PEI dome tweeter for crisp highs UV‑treated polypropylene woofers with Santoprene® surrounds Near full‑rotation swivel with toolless locking cam/toggle system 316L stainless hardware; stainless/ABS clamp fits 1.5"–3.25" tubing Through‑clamp wiring; UV‑resistant polymer basket Grille with 7‑color LED system included (upgradeable to 20 colors / 19 modes with KMLC) Meets or exceeds ASTM G154 (UV) & B117 (salt/fog) standards Specifications Woofer Dual 6.5" (16.5 cm) Tweeter 3/4" (2 cm) PEI dome Rated Impedance 2 Ω per enclosure Peak Power (per ANSI/CTA-2031-A) 390 W (per enclosure) Recommended Amplifier Power (RMS) 130 W (per enclosure) Sensitivity (1W/1m) 93 dB Frequency Response 35 Hz – 21 kHz Height (incl. bracket) 10-1/4" (26 cm) Height from roll bar 8-1/4" (21 cm) Diameter 14-1/16" (35.7 cm) Depth 9-11/16" (24.6 cm) LED Lighting Yes Warranty 3 years (authorized purchase) Specs and features summarized from KICKER’s official product pages.
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.Â
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.