No products found
Use fewer filters or remove all
-
Kicker KMC5 Premium Marine Media Center (Bluetooth)
Vendor:KickerKICKER KMC5 Premium Marine Media Center Your KMC5 comes with a sunlight-viewable full color 3.5-inch LCD screen, rotary encoder and 240 watts of peak power into six channels. Add even more bump to your boat by adding amplifiers to the front, rear, subwoofer and zone-2 RCA outputs. FEATURES AT A GLANCE Charging USB w/Thumb-Drive Playback Bluetooth Connectivity Full-Color LCD Display Ability to control Zone 2 SiriusXM ready 3” Hole Cutout Dedicated Zone 2 speaker outputs NMEA Port Video RCA Input with Remote trigger wire AM/FM and Weather-band Tuner Up to 16 Favorites for each source: AM, FM and SiriusXM Front, Rear, Subwoofer and Zone-2 RCA Outputs AUX RCA Input Day/Night Mode Low Battery alert Loudness control Customizable EQ with Five Presets Voltage Display Specifications: Freq. Response - 20-20k Signal-to-Noise Ratio - 108 dB RCA Outputs - Pre-amp Outputs: Front, Rear, Subwoofer, Zone2 IP Rating - IP66 Outer Trim Ring Dimensions [in, cm] - 3.5 x 5.5, 8.89 x 13.97 Protrusion From Mounting Surface [in, cm] - 1-5/16, 3.33 Required Mounting Depth for Wiring [in, cm] - 5, 12.7 Mounting Hole Diameter [in, cm] - 2.8, 7.19 USB:Playback, Charging, Compatible File System - MP2, MP3, WMA, WAV16, FLAC, AAC, ALAC, M4A, DC 5V 1 Amp, FAT32 Bluetooth Range - 30ft Exclusive to the KMC5, the included video input can be configured in a variety of ways. Monitor your rider at the end of the rope, use it as a backup camera, even use it as a video baby monitor! The video input can be toggled with either a trigger wire or a button push. -
Kicker KMC6 Premium Marine Media Center (Bluetooth)
Vendor:KickerKICKER KMC6 Premium Marine Media Center Connect your Bluetooth to the KMC6, plug into the USB or RCA inputs, or turn on the AM/FM or satellite radio. Add a wired KRC12 Remote Commander or KRC55 Digital Remote Controller for even more control. This durable Media Center is ready for some fun on the water! (IP66) FEATURES AT A GLANCE Charging USB w/Thumb-Drive Playback Bluetooth Connectivity Full-Color LCD Display Ability to control Zone 2 SiriusXM ready 3” Hole Cutout Dedicated Zone 2 speaker outputs NMEA Port Video RCA Input with Remote trigger wire AM/FM and Weather-band Tuner Up to 16 Favorites for each source: AM, FM and SiriusXM Front, Rear, Subwoofer and Zone-2 RCA Outputs AUX RCA Input Day/Night Mode Low Battery alert Loudness control Customizable EQ with Five Presets Voltage Display Specifications: Freq. Response - 20-20k Signal-to-Noise Ratio - 108 dB RCA Outputs - Pre-amp Outputs: Front, Rear, Subwoofer, Zone2 IP Rating - IP66 Outer Trim Ring Dimensions [in, cm] - 3.5 x 5.5, 8.89 x 13.97 Protrusion From Mounting Surface [in, cm] - 1-5/16, 3.33 Mounting Depth [in, cm] - 5, 12.7 Mounting Hole Diameter [in, cm] - 3, 7.62 USB:Playback, Charging, Compatible File System - MP2, MP3, WMA, WAV16, FLAC, AAC, ALAC, M4A, DC 5V 1 Amp, FAT32 Bluetooth Range - 30ft Exclusive to the KMC6, the included video input can be configured in a variety of ways. Monitor your rider at the end of the rope, use it as a backup camera, even use it as a video baby monitor! The video input can be toggled with either a trigger wire or a button push. -
KICKER KMFC11 HLCD 11" Coaxial Tower System
Vendor:KickerKICKER KMFC11 HLCD 11" Coaxial Tower System — sold as a pair. These factory‑mount (flat, 2.5" bolt spacing) horn‑loaded compression‑driver (HLCD) tower speakers deliver smooth, far‑reaching sound with rugged, true‑marine construction and built‑in RGB LED grilles. Highlights Factory‑mount design: mounts to flat tower‑speaker hardpoints with 2.5" bolt spacing and hidden wires Four‑ohm voice coil per enclosure High‑frequency horn design with titanium‑dome compression driver Stitched polypropylene cone with Santoprene® surround UV‑resistant polymer basket and marine‑grade enclosure 316L stainless mounting hardware included Seven‑color LED grilles included (upgradeable to 20 colors / 19 modes with KMLC remote) Meets/exceeds ASTM G154 (UV) & B117 (salt/fog) standards Specifications Woofer 11" (28 cm) Horn‑Loaded Compression Driver 1.4" (3.5 cm) Dome Material Titanium Rated Impedance 4 Ω Recommended Amplifier Power (RMS) 150–300 W (per enclosure) Peak Power (per ANSI/CTA‑2031‑A) 600 W (per enclosure) Sensitivity (1W/1m) 93 dB Frequency Response 20 Hz – 20 kHz LED Lighting Yes (7‑color; optional KMLC adds 20 colors/19 modes) Warranty 3 years (authorized purchase) What's in the Box 2 loaded enclosures 2 vehicle mounting brackets Hardware pack with anti‑seize compound 2 wiring‑harness pigtails 2 grille‑mounted KICKER badges (loose in poly bag) Manual / Customer Information Card Specs and features summarized from KICKER’s official KMFC11 product pages. -
Kicker KMFC8 Coaxial Tower System
Vendor:KickerKicker Marine KMFC8 Coaxial Tower System (Pair) Available in White or Black Built for real-world boating, the KICKER KMFC8 8″ coaxial tower system brings that Garage Bagger Stereo punch to a flat‑mount can. UV‑treated cones with Santoprene® surrounds, stainless hardware, and integrated RGB LEDs keep the party going from sandbar to sunset. Flat‑surface mounting inserts let you aim the cans flat or angled up/down 5° or 10° for perfect throw. Why you’ll love it Flat‑mount cans with inserts for precise aim (flat / ±5° / ±10°) Seven‑color RGB LED lighting (upgradeable with controller) Marine‑ready build: UV and salt/fog tested with stainless hardware Designed for clean, clear projection across the wake Features 8″ UV‑treated polypropylene woofer with Santoprene® surround 1″ PEI tweeter • 4‑ohm voice coil Recommended power: 150 W RMS (300 W peak) LED lighting pre‑installed (7 colors); controller adds more colors/modes Through‑mount wiring system; adjustable logo Specifications System Type 8″ coaxial, flat‑mount tower can (pair) Impedance 4 Ω Power Handling 150 W RMS (300 W peak) Sensitivity 92 dB (1W/1m) Frequency Response 30 Hz – 21 kHz Dimensions (per can) 9‑7/16″ H × 8‑3/16″ Dia × 11‑5/16″ D Lighting 7‑color RGB (upgradeable to 20 colors/19 modes with KMLC) Environmental Meets/exceeds ASTM G154 (UV) & B117 (salt/fog) What’s in the box (1) Pair KMFC8 speaker enclosures Mounting hardware and angle inserts Documentation
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.Â
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.