-
KICKER KMFC11 HLCD 11" Coaxial Tower System
Vendor:KickerKICKER KMFC11 HLCD 11" Coaxial Tower System — sold as a pair. These factory‑mount (flat, 2.5" bolt spacing) horn‑loaded compression‑driver (HLCD) tower speakers deliver smooth, far‑reaching sound with rugged, true‑marine construction and built‑in RGB LED grilles. Highlights Factory‑mount design: mounts to flat tower‑speaker hardpoints with 2.5" bolt spacing and hidden wires Four‑ohm voice coil per enclosure High‑frequency horn design with titanium‑dome compression driver Stitched polypropylene cone with Santoprene® surround UV‑resistant polymer basket and marine‑grade enclosure 316L stainless mounting hardware included Seven‑color LED grilles included (upgradeable to 20 colors / 19 modes with KMLC remote) Meets/exceeds ASTM G154 (UV) & B117 (salt/fog) standards Specifications Woofer 11" (28 cm) Horn‑Loaded Compression Driver 1.4" (3.5 cm) Dome Material Titanium Rated Impedance 4 Ω Recommended Amplifier Power (RMS) 150–300 W (per enclosure) Peak Power (per ANSI/CTA‑2031‑A) 600 W (per enclosure) Sensitivity (1W/1m) 93 dB Frequency Response 20 Hz – 20 kHz LED Lighting Yes (7‑color; optional KMLC adds 20 colors/19 modes) Warranty 3 years (authorized purchase) What's in the Box 2 loaded enclosures 2 vehicle mounting brackets Hardware pack with anti‑seize compound 2 wiring‑harness pigtails 2 grille‑mounted KICKER badges (loose in poly bag) Manual / Customer Information Card Specs and features summarized from KICKER’s official KMFC11 product pages. -
Kicker KMFC8 Coaxial Tower System
Vendor:KickerKicker Marine KMFC8 Coaxial Tower System (Pair) Available in White or Black Built for real-world boating, the KICKER KMFC8 8″ coaxial tower system brings that Garage Bagger Stereo punch to a flat‑mount can. UV‑treated cones with Santoprene® surrounds, stainless hardware, and integrated RGB LEDs keep the party going from sandbar to sunset. Flat‑surface mounting inserts let you aim the cans flat or angled up/down 5° or 10° for perfect throw. Why you’ll love it Flat‑mount cans with inserts for precise aim (flat / ±5° / ±10°) Seven‑color RGB LED lighting (upgradeable with controller) Marine‑ready build: UV and salt/fog tested with stainless hardware Designed for clean, clear projection across the wake Features 8″ UV‑treated polypropylene woofer with Santoprene® surround 1″ PEI tweeter • 4‑ohm voice coil Recommended power: 150 W RMS (300 W peak) LED lighting pre‑installed (7 colors); controller adds more colors/modes Through‑mount wiring system; adjustable logo Specifications System Type 8″ coaxial, flat‑mount tower can (pair) Impedance 4 Ω Power Handling 150 W RMS (300 W peak) Sensitivity 92 dB (1W/1m) Frequency Response 30 Hz – 21 kHz Dimensions (per can) 9‑7/16″ H × 8‑3/16″ Dia × 11‑5/16″ D Lighting 7‑color RGB (upgradeable to 20 colors/19 modes with KMLC) Environmental Meets/exceeds ASTM G154 (UV) & B117 (salt/fog) What’s in the box (1) Pair KMFC8 speaker enclosures Mounting hardware and angle inserts Documentation -
KICKER KMFC9 HLCD 9" Coaxial Tower System
Vendor:KickerKICKER KMFC9 HLCD 9" Coaxial Tower System — sold as a pair. These factory‑mount (flat, 2.5" bolt spacing) horn‑loaded compression‑driver (HLCD) tower speakers deliver smooth, far‑reaching sound with rugged, true‑marine construction and built‑in RGB LED grilles. Highlights Factory‑mount design: mounts to flat tower‑speaker hardpoints with 2.5" bolt spacing and hidden wires Four‑ohm voice coil per enclosure High‑frequency horn with titanium‑dome compression driver Stitched polypropylene cone with Santoprene® surround UV‑resistant polymer basket and marine‑grade enclosure 316L stainless mounting hardware included Seven‑color LED grilles included (upgradeable to 20 colors / 19 modes with KMLC remote, sold separately) Meets/exceeds ASTM G154 (UV) and B117 (salt/fog) standards Specifications Woofer 9" (23 cm) Horn‑Loaded Compression Driver 1.4" (3.5 cm) Dome Material Titanium Rated Impedance 4 Ω Recommended Amplifier Power (RMS) 150–300 W (per enclosure) Peak Power (per ANSI/CTA‑2031‑A) 600 W (per enclosure) Sensitivity (1W/1m) 92 dB Frequency Response 20 Hz – 20 kHz LED Lighting Yes (multi‑color) What's in the Box 2 loaded enclosures 2 vehicle mounting brackets Hardware pack with anti‑seize compound 2 wiring‑harness pigtails 2 grille‑mounted KICKER badges (loose in poly bag) Manual / Customer Information Card Specs/features summarized from KICKER’s official KMFC9 product pages. -
KICKER KMTC11 HLCD 11" Coaxial Tower System
Vendor:KickerKICKER KMTC11 HLCD 11" Coaxial Tower System — sold as a pair. Smooth, far‑reaching sound from a horn‑loaded compression driver in a rugged, true‑marine enclosure with built‑in RGB LED grilles. Highlights Tube‑clamp mount with near‑full rotation (tool‑less locking cam/toggle) Four‑ohm voice coil per enclosure High‑frequency horn with 1.4" titanium compression driver Stitched polypropylene cone with Santoprene® surround UV‑resistant polymer basket; through‑clamp wiring 316L stainless hardware; clamp fits 1.5"–3.25" tubing Seven‑color LED grilles included (KMLC adds 20 colors/19 modes) Meets/exceeds ASTM G154 (UV) & B117 (salt/fog) standards Specifications Woofer 11" (28 cm) HF Driver 1.4" (3.5 cm) titanium horn compression Impedance 4 Ω Recommended Power (RMS) 150–300 W per speaker Peak Power 600 W per speaker Sensitivity 93 dB (1W/1m) Frequency Response 20 Hz – 20 kHz LED Lighting Yes (multi‑color) Height incl. bracket 15-9/16" (39.6 cm) Height from roll bar 13-5/8" (34.6 cm) Diameter 11-7/8" (30.2 cm) Depth 12-11/16" (32.3 cm) Specs/features summarized from KICKER’s official KMTC11 product pages. -
Kicker KMTC65 Coaxial Tower System
Vendor:KickerKicker Marine KMTC65 Coaxial Tower System (Pair) Available in White or Black Bring big sound to the water with the KICKER KMTC65 6.5″ coaxial tower system. These horn-free coaxials deliver crystal‑clear sound with UV‑treated woofers, PEI tweeters, stainless hardware, and integrated RGB LEDs. A 354° swivel clamp lets you aim the music anywhere on the boat or the shore. Why you’ll love it 354° swiveling clamp design for easy rotation and aiming Seven‑color RGB LED lighting (upgradeable with controller) Marine‑ready build: UV and salt/fog tested with stainless hardware Big, clean coaxial sound that cuts across the water Features 6.5″ UV‑treated polypropylene woofer with Santoprene® surround 3/4″ PEI tweeter • 4‑ohm voice coil Recommended power: 65 W RMS (195 W peak) LED lighting pre‑installed (7 colors); controller adds more colors/modes Stainless swivel clamp system Specifications System Type 6.5″ coaxial, swivel‑clamp tower can (pair) Impedance 4 Ω Power Handling 65 W RMS (195 W peak) Sensitivity ~90 dB Frequency Response 35 Hz – 21 kHz Dimensions (per can) 11‑7/16″ H × 7‑1/16″ Dia × 9‑11/16″ D Lighting 7‑color RGB (upgradeable) Environmental Meets/exceeds ASTM G154 (UV) & B117 (salt/fog) What’s in the box (1) Pair KMTC65 speaker enclosures Swivel clamp system Mounting hardware Documentation -
KICKER KMTC8 Coaxial Tower System
Vendor:KickerKICKER KMTC8 Coaxial Tower System (Black or White) Premium 8-inch marine tower speakers sold as a pair. Rotate the cans nearly 360° without tools, light up the night with built‑in RGB LEDs, and enjoy durable, UV‑resistant construction built to withstand salt/fog exposure. Highlights 4-ohm voice coil with 1" PEI tweeter UV‑treated polypropylene woofer with Santoprene® surround Near full‑rotation swivel with toolless locking cam/toggle system 316L stainless hardware; stainless/ABS clamp fits 1.5"–3.25" tubing Through‑clamp wiring; UV‑resistant polymer basket Grille with 7‑color LED system (upgradeable to 20 colors / 19 modes with KMLC) Meets/Exceeds ASTM G154 (UV) & B117 (salt/fog) Specifications Woofer 8" (20 cm) Tweeter 1" (2.5 cm) PEI dome Impedance 4 Ω Power Handling 300W peak / 150W RMS (per speaker) Sensitivity 92 dB (1W/1m) Frequency Response 30 Hz – 21 kHz Height (incl. bracket) 12-3/8" (31.4 cm) Height from roll bar 9-7/16" (24 cm) Diameter 8-3/16" (20.7 cm) Depth 11-5/16" (28.6 cm) LED Lighting Yes Warranty 3 years (authorized purchase) -
KICKER KMTC9 HLCD 9" Coaxial Tower System
Vendor:KickerKICKER KMTC9 HLCD 9" Coaxial Tower System — sold as a pair. Smooth, far‑reaching sound with a horn‑loaded compression driver and rugged, true‑marine build. LED grilles and 354° tool‑less rotation make install and aiming simple. Highlights Horn‑loaded 1.4" titanium compression driver 9" polypropylene woofer with Santoprene® surround 4‑ohm per enclosure; 150–300 W RMS (600 W peak) Near full‑rotation swivel with locking cam/toggle clamp 316L stainless hardware; clamp fits 1.5"–3.25" tubing Seven‑color LED grilles (upgradeable with KMLC remote) Meets/exceeds ASTM G154 UV & B117 salt/fog standards Specifications Woofer 9" (23 cm) HF Driver 1.4" titanium horn compression Impedance 4 Ω Recommended Power (RMS) 150–300 W per speaker Peak Power 600 W per speaker Sensitivity 92 dB (1W/1m) Frequency Response 20 Hz – 20 kHz LED Lighting Yes (multi‑color) Specs summarized from KICKER’s KMTC9 product pages and manual. -
Kicker KMTCXL65 Horn-Loaded HLCD Tower System
Vendor:KickerKICKER All Weather KMTCXL65 HLCD Tower System (Black or White) Award-winning KMXL Horn-Loaded Speakers, dropped inside a pair of tough black or white KICKER tower cans for any all-weather use. Loud, clear, and convenient. Upgradable to 20 colors and 19 lighting modes with the KICKER LED Remote. General Features: Award-Winning, High-Output, Compression-Horn Design Powerful Lightweight Neodymium Motor Incredible Loud, Smooth Volume from 8-inch or 6.5-inch Drivers Customizable LED Lighting to Match Theme or Mood* UV-Resistant Polymer Enclosure Cans in Black or White Revolutionary 354-Degree Can Rotation and Mounting Bracket Stainless-Steel Mounting Clamp Fits Most Tubing Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure Specifications: Woofers (in, mm): 6.5, 165 Horn Loaded Compression Drivers (in, mm): 1-1/4, 32 Rated Impedance (Ohms) :4 Recommended Amp Power (watts RMS): 15-150 Peak Power (watts): 300 Sensitivity (1W, 1m): 90 Frequency Response (Hz): 90-20k Height including bracket (in, cm): 11-1/8, 28.4 Depth (in, cm): 9-3/4, 24.7 Diameter (in, cm): 7, 17.8 LED Lighting: Yes -
Kicker KMTCXL8 HLCD Tower System (White or Black)
Vendor:KickerKICKER KMTCXL8 8" Horn-Loaded Marine Tower Speakers (Pair) Garage Bagger Stereo Marine Series. If you need throw for wake surfing and clean vocals that cut across open water, the KMTCXL8 delivers. These 8-inch, horn-loaded tower cans pack real marine hardware — UV-treated ASA enclosures, stainless mounting, and RGB lighting — all tuned for loud, clear sound without getting harsh. Built for boats that actually get used. Why We Like Them (Installer POV) Horn-Loaded clarity + distance — 1-1/4" aluminum compression driver stays articulate at surfing range. Real marine build — UV-treated, splash-resistant ASA cans and stainless hardware for salt or fresh water duty. Smart mounting — quick-adjust swivel lever lets us aim the pods where your riders are, fast. RGB lighting ready — wire straight or use the Kicker KMLC controller for colors/patterns. Plays nice with amps — 4-ohm load with strong sensitivity so you get loud without crazy power draw. Technical Specs Model KMTCXL8 (51KMTCXL8) Woofer Size 8 in (200 mm) Tweeter 1-1/4 in (32 mm) aluminum compression driver & horn Impedance 4 Ω Sensitivity 93 dB (1W/1m) Freq. Response 60 Hz – 20 kHz Power Peak: 500 W per pair • Recommended amp power: 15–250 W RMS per pair High-Pass (for best performance) 80 Hz @ 12 dB/oct Enclosure Diameter/Width 8-3/16 in (20.8 cm) Enclosure Depth 11-5/16 in (28.7 cm) Height (bottom of roll bar → enclosure bottom) 9-7/16 in (24 cm) Height (bracket top → enclosure bottom) 11-1/2 in (29.2 cm) Construction UV-treated ASA enclosure • Polypropylene + Carbon-Fiber cone • Treated-cloth surround Mounting Stainless-steel brackets with quick-adjust swivel lever; fits most tower tube sizes Lighting RGB LEDs (Kicker KMLC controller optional) Warranty 3-Year (when purchased through an Authorized Kicker Dealer) What’s in the Box (2) KMTCXL8 tower enclosures (left/right) Stainless swivel mounting brackets & hardware Pre-wired RGB pigtails Quick-start / owner’s manual Install Notes (from our bench) Pre-drill a 5/8" (16 mm) wire pass-through in the tube; align with the lower bracket for a clean run. LED wiring: Black = +12V; Red/Green/Blue = grounds. Use a 2-amp fuse within 7" of battery if hard-wiring. Always set a high-pass filter at ~80 Hz (12 dB/oct) to keep the pods clean at volume and preserve amp headroom. Marine / Boat Audio FAQ Will these hold up in salt water? Yes. The ASA enclosures are UV-treated and splash-resistant, and all external hardware is stainless. Rinse with fresh water after salty days and you’re golden. How much power do I really need? They get loud on quality power. We recommend a clean marine amp that can deliver somewhere in the 150–250 W RMS per pair range into 4-ohms. More power is fine if it’s clean and you use the 80 Hz high-pass. Do they swivel so I can aim toward riders? Yes. The quick-adjust swivel lever makes it simple to aim left/right after tightening, so you can focus output at the swim platform or wake. What tube sizes do they fit? The stainless mounting system fits most tower tube diameters. If you’re not sure on your tube size, tell us your boat and tower brand and we’ll confirm fit before we ship. How do the LEDs hook up? Can I control colors? Out of the box you can wire fixed colors (Black = +12V, RGB wires = grounds). For multi-color control and effects, add the Kicker KMLC lighting controller. What about pairing with subs and cabin speakers? We can match the KMTCXL8 with KICKER marine coaxials and a sealed or free-air marine sub stage so the tower pods play clean mid/high while the sub handles low-end. Warranty? Three-year manufacturer warranty when purchased through an Authorized Kicker Dealer — that’s us. Marine Audio Highlights Horn-loaded tower speakers for wake surf and tow-sports UV-treated, splash-resistant ASA enclosures with stainless hardware RGB lighting ready; compatible with KMLC controller Designed for saltwater and freshwater boats: wake, surf, cruiser, pontoon Pro install available by Garage Bagger Stereo Marine -
KICKER KMTDC65 Dual 6.5" Coaxial Tower System
Vendor:KickerKICKER KMTDC65 Dual 6.5" Coaxial Tower System (Black or White) Sold as a pair. Enjoy near full‑rotation aiming, built‑in RGB LEDs, and rugged, UV‑resistant construction for true marine use. Highlights Two‑ohms per enclosure 3/4" PEI dome tweeter for crisp highs UV‑treated polypropylene woofers with Santoprene® surrounds Near full‑rotation swivel with toolless locking cam/toggle system 316L stainless hardware; stainless/ABS clamp fits 1.5"–3.25" tubing Through‑clamp wiring; UV‑resistant polymer basket Grille with 7‑color LED system included (upgradeable to 20 colors / 19 modes with KMLC) Meets or exceeds ASTM G154 (UV) & B117 (salt/fog) standards Specifications Woofer Dual 6.5" (16.5 cm) Tweeter 3/4" (2 cm) PEI dome Rated Impedance 2 Ω per enclosure Peak Power (per ANSI/CTA-2031-A) 390 W (per enclosure) Recommended Amplifier Power (RMS) 130 W (per enclosure) Sensitivity (1W/1m) 93 dB Frequency Response 35 Hz – 21 kHz Height (incl. bracket) 10-1/4" (26 cm) Height from roll bar 8-1/4" (21 cm) Diameter 14-1/16" (35.7 cm) Depth 9-11/16" (24.6 cm) LED Lighting Yes Warranty 3 years (authorized purchase) Specs and features summarized from KICKER’s official product pages. -
KICKER KMXL65 6.5" Marine Horn‑Loaded Coaxial Speakers w/ RGB LEDs
Vendor:KickerKICKER KMXL65 6.5" Marine Horn‑Loaded Coaxial Speakers premium marine horn‑loaded coaxial speakers with integrated RGB LED lighting. Built to REAL MARINE™ standards for long‑lasting performance on the water. Key Features Horn‑Loaded Compression Driver for smooth, high‑output sound Aluminum 1‑1/4″ tweeter domes with lightweight neodymium motor UV‑treated, waterproof poly/carbon‑fiber woofer cones IP66‑style build; Real Marine™ tested Integrated multi‑color RGB LED lighting White & charcoal grilles included; shallow‑mount design Specifications Woofer Size 6‑1/2" (160 mm) Tweeter Size / Dome 1‑1/4" (32 mm) Aluminum Impedance 4 Ω Recommended Amplifier Power (RMS) 15–150 W Peak Power 300 W Sensitivity (1W/1m) 92 dB Frequency Response 90–20,000 Hz Cutout / Mounting Hole 5‑7/16" (139 mm) Mounting Depth 3‑3/16" (81 mm) Crossover (rec.) 12 dB/oct high‑pass @ 80 Hz Grilles Both White & Charcoal Warranty 3 years (authorized purchase) What’s in the Box (2) speakers with white & charcoal grilles Wiring pigtails for audio and RGB Mounting hardware -
KICKER KMXL65G 6.5" Powersports Grilles for KMXL65
Vendor:KickerKMXL65G 6.5" Powersports Grilles protect your KMXL65 horn‑loaded coaxial speakers from debris on the trail or water, while matching the series look. Key Features Made specifically for KICKER KMXL65 speakers Weather‑resistant steel‑mesh design with durable surround Protects against sand, mud, and trail debris Quick, straightforward installation Styled to match KMXL series aesthetics Sold as a pair Specifications Compatibility KICKER KMXL65 Speakers Size 6.5" (fits KMXL65) Finish Black Construction Weather‑resistant metal mesh Sold As Pair Part Number 51KMXL65G What’s in the Box (2) 6.5" Powersports Grilles (black) Mounting hardware
-
SaleKicker KEY500.1 Smart Mono Amplifier (bass revealer/processor)
Vendor:KickerKEY500.1 Smart Mono Subwoofer Amplifier Auto-EQ/processor for 23.5-24 Harley Davidson DETAILS 4Ω = 150 Watts RM 2Ω = 300 Watts RMS 1Ω = 500 Watts RMS It can be made Plug and Play for your Harley Davidson stock radio Will work pn 14-18 stock radios. No flashing required Variable low pass 40-160 Hz, Variable High Pass 10-40 Hz AUTO EQ Using KICKER’s supplied test tones (below), the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp! Start with these FREE TEST TONES for easy setup!Sale -
Kicker KLSR LED Speaker Rings
Vendor:KickerKICKER KLSR Multicolor LED Speaker Rings Rings come in 6.5", 8", 10", and 12" diameters. And now there’s a pair for popular 8.8” mounting hole patterns. Features: Add a custom accent to your ride Perfect for your vehicle, boat or UTV Adjust the color to fit your theme or mood 6.5"- Comes in pairs. 8"- Comes in pairs. 10"- Comes packaged as a single ring for a 10-inch subwoofer. 12"- Comes packaged as a single ring for a 12-inch subwoofer. Comes with two bottom rings, two top rings, two bottom gaskets, and other mounting materials Half-inch spacers that light up! These weather-proof polycarbonate rings come equipped with seven standard color options. Expand your color palette to 20 colors and 19 lighting modes with the optional KMLC LED Remote Controller. model: 50KLSR65 | 47KLSR8 | 47KLSR10 | 47KLSR12 | 51KLSR88 -
Kicker KM 10" Freeair Marine Subwoofer (2Ω or 4Ω)
Vendor:KickerKICKER KM 10" Freeair Marine Subwoofer (2Ω or 4Ω) (All Weather) Features: Two-Ohm Voice Coil Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) sold in singles Specs: Up to 175 watts RMS (350 watts peak power) Frequency response: 30-500 Hz Sensitivity: 86.27 dB Impedance: 4 or 2 ohms Mounting depth: 5" Mounting cutout diameter: 9-3/16" -
Kicker KM 12" Freeair Marine Subwoofer (2Ω or 4Ω)
Vendor:KickerKICKER KM 12" Freeair Marine Subwoofer (2Ω or 4Ω) (All Weather) Features: 12" subwoofer with dual (2Ω or 4Ω) voice coils Injection-Molded Polypropylene Cone Co-molded Santoprene® Surround UniPlate™ Back Plate And Pole Piece Thick Tinsel Leads Large Ceramic Magnet Polymer Basket Resists Corrosion Protective Terminal Cap Stainless Mounting Hardware Included Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test) sold in singles Specs: Up to 175 watts RMS (350 watts peak power) Frequency response: 30-500 Hz Sensitivity: 86.27 dB Impedance: 4 or 2 ohms Mounting depth: 5.5" Mounting cutout diameter: 11"
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.