-
Beyma Power 10IX - 10” Midrange Speakers
Vendor:BeymaLOW FREQUENCY SPEAKER 10 INCH Sold in Pairs Weather Treated Specifications Nominal Basket Diameter 10" / 250mm Impedance 8 ohms AES Power Rating 500 Watts Program Power 1,000 Watts Frequency Response 40Hz - 3.3kHz Sensitivity (1W/1m) 90dB Voice Coil Diameter 3" / 76.2mm Voice Coil Length 30 mm Air Gap Height 8 mm X Damage (peak to peak) 49 mm BL Factor 19 N/A Mounting Information Overall Diameter 10.3" / 261mm Bolt Circle Diameter 9.6" / 243.5mm Baffle Cutout Diameter- - Front Mount 9" / 228mm No. Of Mounting Holes 8 Overall Depth 5.2" / 133mm Net Weight 18.3 lb. / 6.8 kg. Shipping Weight 16 lb. / 7.25 kg. Materials Basket Die Cast Aluminum Cone Paper Surround Rubber Voice Coil Edgewound Copper Wire Magnet Ferrite Thiele-Small Parameters Resonant Frequency (fs) 41 Hz Impedance (Re) 6.8 ohms Coil Inductance (Le) 1.0 mH Mechanical Q (Qms) 8.1 Electrical Factor (Qes) .46 Total Q (Qts) .43 Comp. Equivelant Vol. (Vas) 1.15 ft3 / 32.5 Liters Voice Coil Overhang (Xmax) 13.0 mm Moving Mass (Mms) 95 Grams Surface Area of Cone (Sd)m2 0.038 Reference Efficiency .5% Displacement Volume (Vd) 505 cm3 -
Beyma 10CX300FE - 10" Pro Coaxial Speaker (Single)
Vendor:BeymaBeyma 10CX300FE 10" Coaxial Speaker (Sold in Singles) THE BEYMA 10CX300FE 10" COAXIAL SPEAKER HAS GOOD PROJECTION & HAS A NICE SMOOTH SOUND! KEY FEATURES High power handling: 600 W / 100 W program power 2,5” / 1,75” voice coil (LF/HF) High sensitivity: 96,5 / 104 dB (1W / 1m) (LF/HF) FEA-optimized common magnet circuit Shorting cap for extended response Weatherproof cone with treatment for both sides of the cone PM4 HF diaphragm 70º conical coverage horn Specifications Low Frequency Woofer Nominal Basket Diameter 10" / 250mm Impedance 8 ohms AES Power Rating 300 Watts Program Power 600 Watts Frequency Response 50Hz - 8.0kHz Sensitivity (1W/1m) 96.5dB Voice Coil Diameter 2.5" / 63.5mm Voice Coil Length 17.5 mm Air Gap Height 10 mm X Damage (peak to peak) 30 mm BL Factor 11.65 N/A High Frequency Driver Impedance 16 ohms AES Power Rating 50 Watts AES @ 2kHz Frequency Response 2kHz to 20kHz Sensitivity (1W/1m) 104dB Dispersion 70° Voice Coil Diameter 1.75" / 44.45mm Mounting Information Overall Diameter 10.26" / 260.5mm Bolt Circle Diameter 9.59" / 243.5mm Baffle Cutout Diameter- - Front Mount 8.98" / 228mm No. Of Mounting Holes 8 Overall Depth 6.02" / 153mm Net Weight 11.24 lb. / 5.1 kg. Shipping Weight 12.13 lb. / 5.5 kg. Materials Low Frequency Woofer Basket Die-Cast Aluminum Cone Waterproof Paper Surround Cloth Voice Coil Aluminum Magnet Ferrite High Frequency Tweeter Diaphragm PM4 Voice Coil Edgewound Aluminum Ribbon Voice Coil Former Kapton Magnet Ferrite Thiele-Small Parameters Resonant Frequency (fs) 48 Hz Impedance (Re) 5.2 ohms Coil Inductance (Le) .4 mH Mechanical Q (Qms) 5.3 Electrical Factor (Qes) .41 Total Q (Qts) .38 Comp. Equivalent Vol. (Vas) 2.21 ft3 / 62.7 Liters Voice Coil Overhang (Xmax) 6.75 mm Surface Area of Cone (Sd)m2 0.038m2 Moving Mass (Mms) 35 Grams Reference Efficiency 1.65% Displacement Volume (Vd) 256 cm3 -
SaleCicada Audio CMB10.S4 10" Pro Sound Midrange Speaker (Single)
Vendor:Cicada AudioCicada Audio CMB10.S4 Pro Sound MidBass Driver Features: 600WRMS/1200 MAX Power Handling Ferrite Magnet structure Heavy Duty / Die-cast Aluminum Basket 3.0” 4-Ohm / 6 Layer High Temp Voice Coil (Black Coat) Voice Coil Vented Voice Coil Gap for Maximum Heat dissipation Advanced Voice Coil Heat Sink Design for Better Heat Dissipation Frequency Response: 35Hz -1.75Khz+/-5dB High Sensitivity: 87.2dB (1W/1M ) Total Diameter: 10.24" / 260mm Mounting Depth: 4.31" / 109.5mm Mounting Diameter: 8.98" / 228mm SOLD INDIVIDUALLY The new Cicada Audio CMB10.S4 "MidBass" drivers are a great solution for Harley baggers and other motorcycles striving for the ultimate in midbass response. These are not an easy fit. These are designed for FULL custom builds. Fully custom installed utilizing Jefe or Nagy rings bag rings. These drivers represent the next wave of products from Cicada Audio. These drivers handle more power, are louder, play lower, with more authority, and sound better right out of the box than any other pro-audio-type speaker for Harley applications. We've built these speakers with the best materials we can use and keep sensitivity and sound quality as high as possible. With 3-inch/ 6 Layer 4-ohm voice coils on the MidBass driver and a "Trick" dust cap. We've built in extreme sensitivity for unreal output and High power/High heat dissipation. These are not for the squeamish, and they are not lightweight. These speakers are way beyond all the competition. TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian Chinese Simplified Hungarian Russian Chinese Traditional Indonesian Slovak Czech Italian Slovenian Danish Japanese Spanish Dutch Klingon Swedish English Korean Thai Estonian Latvian Turkish Finnish Lithuanian Ukrainian French Malay Urdu German Maltese Vietnamese Greek Norwegian Welsh Haitian Creole Persian TRANSLATE with COPY THE URL BELOW Back EMBED THE SNIPPET BELOW IN YOUR SITE Enable collaborative features and customize widget: Bing Webmaster Portal BackSale -
Cicada Audio CMB10.S4NEO 10" Pro Mid-Bass Driver w/ CMC™ & NEO Technology - 4Ω (Single)
Vendor:Cicada AudioCicada Audio® 10" CMB10.S4 Pro Mid-Bass Driver w/ CMC™ & NEO Technology Model: CMB10.S4NEO – For Harley-Davidson® & Motorcycle Audio Lightweight. Loud. Legendary. The Cicada Audio® CMB10.S4NEO is the ultimate 10-inch mid-bass driver engineered for Harley-Davidson® motorcycles and high-performance motorcycle audio systems. Featuring our cutting-edge Carbon Matrix Composite™ (CMC™) cone and ultra-efficient NEO motor technology, this speaker delivers powerful, distortion-free mid-bass while keeping weight minimal—perfect for riders who demand loud, clear sound at cruising speeds. Key Features: ✔ Motorcycle-Optimized – Designed specifically for Harley-Davidson® and custom motorcycle sound systems✔ NEO Motor Technology – High-output N42 neodymium magnetic structure for maximum efficiency with minimal weight✔ Carbon Matrix Composite™ (CMC™) Cone – Lightweight, ultra-rigid, and weather-resistant for crisp, powerful mid-bass✔ Rain or Shine™ All-Weather Performance – Built to withstand the elements✔ Proprietary Cicada Audio® “A” Basket Design – Die-cast aluminum with Vortex Flow Venting™ for superior heat dissipation and structural integrity✔ Black Coat™ OFC Copper Voice Coil – Ensures high conductivity, low resistance, and extreme thermal performance✔ Engineered in the U.S.A. – Designed by American audio experts for premium sound✔ Two-Year Warranty – Confidence in quality and durability Specifications: Power Handling: 500W RMS / 1000W MAX Voice Coil: 3-inch / 4Ω / 6-layer OFC Copper with Black Coat™ Magnet: N42 Neodymium Slug Basket: Heavy-duty die-cast aluminum with Vortex Flow Venting™ Cooling: Vented voice coil gap + advanced heat sink design for maximum heat dissipation Frequency Response: 35 Hz – 3 kHz ±5 dB Sensitivity: 90 dB (1W/1M) Total Diameter: 10.24” / 260 mm Mounting Depth: 4.5” / 115 mm Mounting Diameter: 8.98” / 228 mm Recommended Amplifiers: Pair the CMB10.S4NEO with one of these high-performance Cicada Audio® amplifiers for optimal results: BDA1600.1 – Mono Block Amplifier FLX1400.4 – 4-Channel Pro Amplifier (350W x 4) FLX1600.1 – Mono Subwoofer Amplifier (1600W) These amplifiers are a perfect match for the CMB10.S4NEO, delivering the clean, powerful output needed to make your 10s truly shine—whether you’re cruising the highway or parked at the show. TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian Chinese Simplified Hungarian Russian Chinese Traditional Indonesian Slovak Czech Italian Slovenian Danish Japanese Spanish Dutch Klingon Swedish English Korean Thai Estonian Latvian Turkish Finnish Lithuanian Ukrainian French Malay Urdu German Maltese Vietnamese Greek Norwegian Welsh Haitian Creole Persian TRANSLATE with COPY THE URL BELOW Back EMBED THE SNIPPET BELOW IN YOUR SITE Enable collaborative features and customize widget: Bing Webmaster Portal Back -
DB Drive EX10NCD Euphoria XPERT 10″ Pro Coaxial Loudspeaker
Vendor:DB DriveEX10NCD NEODYMIUM Series 10” 2-WAY LOUDSPEAKERS Early on, we have been committed to innovation in all things involving car audio. Experience the passion through audio designed and engineered for that moment you want to raise the bar and set the mood. Features 2.5″ (63.5mm) Midrange Voice Coil Neodymium Ring Magnet Assembly Rear Mounted Full Sized Compression Driver IP52 Rateed Paper Cone With Treated Cloth Surround Die-Cast Aluminum Basket With Radial Venting 1.4″ (36mm) Polyester Tweeter Diaphragm Wide Dispersion Conical HF Waveguide 12dB Passive Crossover Included Protective Grills Included Sold in pairs All weather Specifications Nominal Impedance 5.2Ω Power Handling 500 Watts Dynamic Wattage 1000 Watts Freq Response 70hZ-20kHz Sensitivity (1w/1M) 106.1 DB Voice Coil Diameter 2" -
DB Drive Xpert EXFW10NCF 10" Shallow Subwoofer
Vendor:DB DriveEXFW10NCF 10" Shallow Subwoofer Features • Power AES Handling: 400 Watts• Dynamic Wattage: 1000 Watts• Frequency Response: 35.813• Sensitivity (1w/1m): 84.4dB• Impedance: Dual 4Ω (3.6Ω + 3.6Ω)• 10" Shallow Mount NEO Carbon Subwoofer• 2.5″ (63.5mm) Voice Coil Diameter• Weather Resistant Cone with Treated Surround Dimensions • Mounting Depth: 3.54"• Cutout Diameter: 9.32" Enclosure Specs Sealed .55ft3 Vented .67ft3 Need rings to install get them here! -
DB Drive XPERT EXM10N 10" NEO Midrange
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. Xpert EXM10N 10" NEO Midrange Experience the Power of Precision with XPERT NEO Midrange! Introducing the XPERT NEO MID-RANGE EXM10N, where precision meets power in a 10” structure that redefines your audio experience. Features 2.5″ (63.5mm) Voice Coil Neodymium 10 Piece Radially Equalized Magnet Assembly IP52 Rated Paper Cone With Treated Cloth Surround Die-Cast Aluminum Basket With Radial Venting Specs Resonant Frequency (fs) 71.7Hz D.C. Voice Coil Resistance 3.2Ω Nominal Impedence 4Ω Power Handling 400 Watts Dynamic Wattage 800 Watts Sensitivity (1w/1m) 102.1 dB Voice Coil Diameter 2.5" (63.5mm) Need rings to install get them here! -
DB Drive XPERT EXM10SN 10" Midrange - Stamped Frame
Vendor:DB DriveTRUE SOUND. TRUE SOURCE. Xpert EXM10SN 10" Midrange - Stamped Frame Experience the Power of Precision with XPERT NEO Midrange! Introducing the XPERT NEO MID-RANGE EXM10SN, where precision meets power in a 10” structure that redefines your audio experience. Features 2.5″ (63.5mm) Voice Coil Neodymium 12 Piece Radially Equalized Magnet Assembly IP52 Rated Paper Cone With Treated Cloth Surround Heavy Gauge Stamped Steel Basket Specs Resonant Frequency (fs) 49.4Hz D.C. Voice Coil Resistance 3.2Ω Nominal Impedence 4Ω Power Handling 400 Watts Dynamic Wattage 800 Watts Sensitivity (1w/1m) 101.8 dB Voice Coil Diameter 2.0" (51mm) Need rings to install get them here! -
SaleDB Drive Xpert EXW10CF 10" Dual 2-Ohm Carbon Fiber Subwoofer
Vendor:DB DriveDB Drive Xpert EXW10CF Dual 2-Ohm Carbon Fiber Subwoofer With Ferrite Magnet Features 10″ Carbon Fiber Ferrite Woofer 3″ voice coil Die-Cast Aluminum Basket Large Gauge Compression Terminals Foam Surround Ferrite Magnet Weather Resistant Carbon Fiber Cone PVC gasket Dual 2Ω 8 Layer Voice Coil Specs: Power Handling: 1000W Dynamic Wattage: 2000W Frequency Response: 41.328Hz Sensitivity: 83.1dB Impedance: 1.8Ω + 1.8Ω Dimensions Overall Diameter: Cutout Diameter: Mounting Depth: Need rings to install get them here!Sale -
Diamond Audio MSMB102NEO 10" Midbass
Vendor:Diamond Audio10" High Power Midbass Neodymium Driver Water Resistant in 2Ω or 4Ω Features: Speaker Size 10" Impedance 2Ω or 4Ω RMS Power Rating 400w Max Power Rating 800w Freq Range 55Hz-4.5KHz Sensitivity (1W/1Mm) 96dB Water-resistant Sold in Pairs Diamond Audio’s new state-of-the-art 10" high-power midbass 2Ω or 4Ω neodymium driver, MSMB102NEO, sets a new benchmark for motorsports midbass driver. It boasts a cast basket, water-resistant carbon fiber cone, exceptional power handling, a wide frequency response ranging from 55Hz to 4.5KHz, and is available in 2 Ohm. With an output sensitivity of over 95dB, the MSMB102NEOs allow for a loud performance with minimal power. However, should you desire to push them to their limits, their high power handling. For those seeking tremendous volume and crystal-clear clarity, the Diamond Audio MSMB10NEO drivers are a must-have in your next motorcycle or mobile audio installation! See the MSMB104NEO for a 4Ω version. -
SaleGround Zero GZCK 250XSPL 10" Midrange Speakers
Vendor:Ground ZeroGround Zero GZCK 250XSPL 10" Driver Low Freq 400 Watts max 250 mm / 10″ high efficient SPL midwoofer with stiff reinforced paper cone and long stroke CCAW voice coil, incl. grill 10″ SPL midwoofer 50 mm / 2″ CCA voice coil Fiber reinforced paper cone Long stroke foam surround Resonance free steel basket Paper dust cap Soldering terminal 1 piece / package Sold in singles Additional Info Model SPL Midwoofer Diameter 9.84" Power Handling 400 Impedance 4Ω Freq Response 40Hz-6KHz Voice Coil 2" CCA Mounting 9.25" Mounting Depth 4.33" Resonance Freq (FS) 44Hz Efficiency 93 DBSale -
SaleGround Zero GZCW 10SPL 10" High-Power mid-woofer
Vendor:Ground ZeroGround Zero GZCW 10SPL High-Power mid-woofer 1000 Watts max Description 10″ mid-woofer Klippel® optimized Non-pressed paper cone W-shape long stroke surround GZ-design aluminum cast housing 75 mm / 3″ copper voice coil Reinforced paper dust cap Compact screw terminals One piece/package Additional Info High-Power SPL mid-woofer Diameter 25 cm / 10″ Power Handling 500 / 1000 Watts Impedance 4Ω Freq Response 30 Hz – 2400 Hz (F-3 in the recommended enclosure) Voice Coil 75 mm / 3″ Copper Mounting 8.94″ Mounting Depth 4.80" Resonance Freq (FS) 33Hz Efficiency 91 DB Equiv. Air volume (Vas) 50 L / 1.77 cu.ft. Owner's ManualSale
-
Beyma Power 10IX - 10” Midrange Speakers
Vendor:BeymaLOW FREQUENCY SPEAKER 10 INCH Sold in Pairs Weather Treated Specifications Nominal Basket Diameter 10" / 250mm Impedance 8 ohms AES Power Rating 500 Watts Program Power 1,000 Watts Frequency Response 40Hz - 3.3kHz Sensitivity (1W/1m) 90dB Voice Coil Diameter 3" / 76.2mm Voice Coil Length 30 mm Air Gap Height 8 mm X Damage (peak to peak) 49 mm BL Factor 19 N/A Mounting Information Overall Diameter 10.3" / 261mm Bolt Circle Diameter 9.6" / 243.5mm Baffle Cutout Diameter- - Front Mount 9" / 228mm No. Of Mounting Holes 8 Overall Depth 5.2" / 133mm Net Weight 18.3 lb. / 6.8 kg. Shipping Weight 16 lb. / 7.25 kg. Materials Basket Die Cast Aluminum Cone Paper Surround Rubber Voice Coil Edgewound Copper Wire Magnet Ferrite Thiele-Small Parameters Resonant Frequency (fs) 41 Hz Impedance (Re) 6.8 ohms Coil Inductance (Le) 1.0 mH Mechanical Q (Qms) 8.1 Electrical Factor (Qes) .46 Total Q (Qts) .43 Comp. Equivelant Vol. (Vas) 1.15 ft3 / 32.5 Liters Voice Coil Overhang (Xmax) 13.0 mm Moving Mass (Mms) 95 Grams Surface Area of Cone (Sd)m2 0.038 Reference Efficiency .5% Displacement Volume (Vd) 505 cm3 -
Beyma 10CX300FE - 10" Pro Coaxial Speaker (Single)
Vendor:BeymaBeyma 10CX300FE 10" Coaxial Speaker (Sold in Singles) THE BEYMA 10CX300FE 10" COAXIAL SPEAKER HAS GOOD PROJECTION & HAS A NICE SMOOTH SOUND! KEY FEATURES High power handling: 600 W / 100 W program power 2,5” / 1,75” voice coil (LF/HF) High sensitivity: 96,5 / 104 dB (1W / 1m) (LF/HF) FEA-optimized common magnet circuit Shorting cap for extended response Weatherproof cone with treatment for both sides of the cone PM4 HF diaphragm 70º conical coverage horn Specifications Low Frequency Woofer Nominal Basket Diameter 10" / 250mm Impedance 8 ohms AES Power Rating 300 Watts Program Power 600 Watts Frequency Response 50Hz - 8.0kHz Sensitivity (1W/1m) 96.5dB Voice Coil Diameter 2.5" / 63.5mm Voice Coil Length 17.5 mm Air Gap Height 10 mm X Damage (peak to peak) 30 mm BL Factor 11.65 N/A High Frequency Driver Impedance 16 ohms AES Power Rating 50 Watts AES @ 2kHz Frequency Response 2kHz to 20kHz Sensitivity (1W/1m) 104dB Dispersion 70° Voice Coil Diameter 1.75" / 44.45mm Mounting Information Overall Diameter 10.26" / 260.5mm Bolt Circle Diameter 9.59" / 243.5mm Baffle Cutout Diameter- - Front Mount 8.98" / 228mm No. Of Mounting Holes 8 Overall Depth 6.02" / 153mm Net Weight 11.24 lb. / 5.1 kg. Shipping Weight 12.13 lb. / 5.5 kg. Materials Low Frequency Woofer Basket Die-Cast Aluminum Cone Waterproof Paper Surround Cloth Voice Coil Aluminum Magnet Ferrite High Frequency Tweeter Diaphragm PM4 Voice Coil Edgewound Aluminum Ribbon Voice Coil Former Kapton Magnet Ferrite Thiele-Small Parameters Resonant Frequency (fs) 48 Hz Impedance (Re) 5.2 ohms Coil Inductance (Le) .4 mH Mechanical Q (Qms) 5.3 Electrical Factor (Qes) .41 Total Q (Qts) .38 Comp. Equivalent Vol. (Vas) 2.21 ft3 / 62.7 Liters Voice Coil Overhang (Xmax) 6.75 mm Surface Area of Cone (Sd)m2 0.038m2 Moving Mass (Mms) 35 Grams Reference Efficiency 1.65% Displacement Volume (Vd) 256 cm3 -
Sale
Cicada Audio CMB10.S4 10" Pro Sound Midrange Speaker (Single)
Vendor:Cicada AudioCicada Audio CMB10.S4 Pro Sound MidBass Driver Features: 600WRMS/1200 MAX Power Handling Ferrite Magnet structure Heavy Duty / Die-cast Aluminum Basket 3.0” 4-Ohm / 6 Layer High Temp Voice Coil (Black Coat) Voice Coil Vented Voice Coil Gap for Maximum Heat dissipation Advanced Voice Coil Heat Sink Design for Better Heat Dissipation Frequency Response: 35Hz -1.75Khz+/-5dB High Sensitivity: 87.2dB (1W/1M ) Total Diameter: 10.24" / 260mm Mounting Depth: 4.31" / 109.5mm Mounting Diameter: 8.98" / 228mm SOLD INDIVIDUALLY The new Cicada Audio CMB10.S4 "MidBass" drivers are a great solution for Harley baggers and other motorcycles striving for the ultimate in midbass response. These are not an easy fit. These are designed for FULL custom builds. Fully custom installed utilizing Jefe or Nagy rings bag rings. These drivers represent the next wave of products from Cicada Audio. These drivers handle more power, are louder, play lower, with more authority, and sound better right out of the box than any other pro-audio-type speaker for Harley applications. We've built these speakers with the best materials we can use and keep sensitivity and sound quality as high as possible. With 3-inch/ 6 Layer 4-ohm voice coils on the MidBass driver and a "Trick" dust cap. We've built in extreme sensitivity for unreal output and High power/High heat dissipation. These are not for the squeamish, and they are not lightweight. These speakers are way beyond all the competition. TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian Chinese Simplified Hungarian Russian Chinese Traditional Indonesian Slovak Czech Italian Slovenian Danish Japanese Spanish Dutch Klingon Swedish English Korean Thai Estonian Latvian Turkish Finnish Lithuanian Ukrainian French Malay Urdu German Maltese Vietnamese Greek Norwegian Welsh Haitian Creole Persian TRANSLATE with COPY THE URL BELOW Back EMBED THE SNIPPET BELOW IN YOUR SITE Enable collaborative features and customize widget: Bing Webmaster Portal BackSale -
Cicada Audio CMB10.S4NEO 10" Pro Mid-Bass Driver w/ CMC™ & NEO Technology - 4Ω (Single)
Vendor:Cicada AudioCicada Audio® 10" CMB10.S4 Pro Mid-Bass Driver w/ CMC™ & NEO Technology Model: CMB10.S4NEO – For Harley-Davidson® & Motorcycle Audio Lightweight. Loud. Legendary. The Cicada Audio® CMB10.S4NEO is the ultimate 10-inch mid-bass driver engineered for Harley-Davidson® motorcycles and high-performance motorcycle audio systems. Featuring our cutting-edge Carbon Matrix Composite™ (CMC™) cone and ultra-efficient NEO motor technology, this speaker delivers powerful, distortion-free mid-bass while keeping weight minimal—perfect for riders who demand loud, clear sound at cruising speeds. Key Features: ✔ Motorcycle-Optimized – Designed specifically for Harley-Davidson® and custom motorcycle sound systems✔ NEO Motor Technology – High-output N42 neodymium magnetic structure for maximum efficiency with minimal weight✔ Carbon Matrix Composite™ (CMC™) Cone – Lightweight, ultra-rigid, and weather-resistant for crisp, powerful mid-bass✔ Rain or Shine™ All-Weather Performance – Built to withstand the elements✔ Proprietary Cicada Audio® “A” Basket Design – Die-cast aluminum with Vortex Flow Venting™ for superior heat dissipation and structural integrity✔ Black Coat™ OFC Copper Voice Coil – Ensures high conductivity, low resistance, and extreme thermal performance✔ Engineered in the U.S.A. – Designed by American audio experts for premium sound✔ Two-Year Warranty – Confidence in quality and durability Specifications: Power Handling: 500W RMS / 1000W MAX Voice Coil: 3-inch / 4Ω / 6-layer OFC Copper with Black Coat™ Magnet: N42 Neodymium Slug Basket: Heavy-duty die-cast aluminum with Vortex Flow Venting™ Cooling: Vented voice coil gap + advanced heat sink design for maximum heat dissipation Frequency Response: 35 Hz – 3 kHz ±5 dB Sensitivity: 90 dB (1W/1M) Total Diameter: 10.24” / 260 mm Mounting Depth: 4.5” / 115 mm Mounting Diameter: 8.98” / 228 mm Recommended Amplifiers: Pair the CMB10.S4NEO with one of these high-performance Cicada Audio® amplifiers for optimal results: BDA1600.1 – Mono Block Amplifier FLX1400.4 – 4-Channel Pro Amplifier (350W x 4) FLX1600.1 – Mono Subwoofer Amplifier (1600W) These amplifiers are a perfect match for the CMB10.S4NEO, delivering the clean, powerful output needed to make your 10s truly shine—whether you’re cruising the highway or parked at the show. TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian Chinese Simplified Hungarian Russian Chinese Traditional Indonesian Slovak Czech Italian Slovenian Danish Japanese Spanish Dutch Klingon Swedish English Korean Thai Estonian Latvian Turkish Finnish Lithuanian Ukrainian French Malay Urdu German Maltese Vietnamese Greek Norwegian Welsh Haitian Creole Persian TRANSLATE with COPY THE URL BELOW Back EMBED THE SNIPPET BELOW IN YOUR SITE Enable collaborative features and customize widget: Bing Webmaster Portal Back
Upgrade Your Ride with DS18 Audio
Elevate your Harley Davidson’s audio system with DS18 audio speakers and amplifiers. Engineered for motorcycle enthusiasts who crave bold, crystal-clear sound, DS18 speakers bring your favorite music to life. Whether you're cruising down the highway or taking a scenic detour, DS18’s high-quality speakers deliver powerful audio to enhance every ride.
Built to Withstand the Road
DS18 speakers are designed to endure the challenges of the open road while providing exceptional sound quality. Built using durable, weatherproof materials, these speakers are engineered to resist vibrations, impacts, and exposure to the elements without compromising on audio clarity.
Effortless Integration with Your Bagger Motorcycle
Designed for seamless integration, DS18 speakers fit effortlessly into your motorcycle’s audio system without sacrificing space or style. With user-friendly installation and advanced connectivity options, including Bluetooth and RCA inputs, DS18 ensures you can upgrade your sound system without sacrificing functionality.
Customizable Sound for Every Rider
From deep bass to crisp highs, DS18 speakers offer the customization to match your audio preferences. Featuring advanced DSP (Digital Signal Processing) technology, these speakers allow you to fine-tune your sound system for an optimal listening experience. Whether you prefer a balanced sound or a bass-heavy setup, DS18 speakers deliver versatile solutions for your needs.
Shop DS18 Audio at Garage Bagger Stereo
Explore our wide selection of DS18 speakers and motorcycle audio accessories at Garage Bagger Stereo. Whether you’re looking for a minor upgrade or a complete overhaul, we are your trusted destination for premium motorcycle audio gear. With expert guidance and top-notch customer service, we ensure you find the perfect audio solution for your ride.