{"product_id":"ds18-2014-2023-harley-2-speaker-plug-and-play-audio-system","title":"2014-2023 Harley-Davidson 2-Speaker Plug and Play Audio System | DS18","description":"\u003c!-- Shopify-Safe GBS Product Sheet\n     2014-2023 Harley-Davidson\n     DS18 2-Speaker Plug-and-Play Audio System\n     Road Glide or Street Glide --\u003e\n\n\u003csection class=\"gbs-flx gbs-locked gbs-ds18-1423-2speaker\" aria-label=\"2014-2023 Harley-Davidson Road Glide and Street Glide DS18 two-speaker plug-and-play audio system\"\u003e\n\n  \u003csection class=\"gbs-hero\"\u003e\n    \u003cdiv class=\"gbs-hero-left\"\u003e\n      \u003cdiv class=\"gbs-eyebrow\"\u003e2014–2023 ROAD GLIDE OR STREET GLIDE\u003c\/div\u003e\n\n      \u003ch1\u003e2014–2023 Harley-Davidson 2-Speaker Plug-and-Play Audio System | DS18\u003c\/h1\u003e\n\n      \u003cp\u003e\n        Upgrade a compatible 2014–2023 Harley-Davidson Road Glide or Street\n        Glide with a complete two-speaker audio system built around a DS18\n        ION1600.4D amplifier, two high-output 6.5-inch hybrid speakers,\n        factory-radio integration and the primary power, mounting and\n        installation components required for the selected motorcycle.\n      \u003c\/p\u003e\n\n      \u003cp\u003e\n        Select Road Glide or Street Glide before ordering so the system can be\n        supplied with the correct fairing-specific amplifier mounting\n        configuration. Two amplifier channels power the included speakers,\n        while two channels remain available for a properly matched future\n        rear-speaker upgrade.\n      \u003c\/p\u003e\n\n      \u003cdiv class=\"gbs-btn-row\"\u003e\n        \u003ca class=\"gbs-btn-primary\" href=\"#gbs-fitment\"\u003eCheck Motorcycle Fitment\u003c\/a\u003e\n        \u003ca class=\"gbs-btn-primary\" href=\"#gbs-included\"\u003eSee Everything Included\u003c\/a\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gbs-hero-right\"\u003e\n      \u003ch2\u003eComplete Two-Speaker Audio System\u003c\/h2\u003e\n\n      \u003cul\u003e\n        \u003cli\u003eRoad Glide and Street Glide options\u003c\/li\u003e\n        \u003cli\u003eCompatible 2014–2023 Harley-Davidson Touring platform\u003c\/li\u003e\n        \u003cli\u003eDS18 ION1600.4D four-channel Class-D amplifier\u003c\/li\u003e\n        \u003cli\u003eTwo DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers\u003c\/li\u003e\n        \u003cli\u003e4-ohm nominal impedance per speaker\u003c\/li\u003e\n        \u003cli\u003e150 watts RMS per included speaker\u003c\/li\u003e\n        \u003cli\u003eBuilt-in 1-inch titanium compression drivers\u003c\/li\u003e\n        \u003cli\u003eDS18 factory-radio plug-and-play harness\u003c\/li\u003e\n        \u003cli\u003e4-AWG amplifier power wiring\u003c\/li\u003e\n        \u003cli\u003eBike-specific amplifier mounting solution\u003c\/li\u003e\n        \u003cli\u003eTwo amplifier channels available for future expansion\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eComplete 2-Speaker Plug-and-Play System Overview\u003c\/h2\u003e\n\n    \u003cp\u003e\n      This Garage Bagger Stereo package combines the amplifier, front fairing\n      speakers, factory-radio signal interface, power wiring and\n      motorcycle-specific mounting components required to build a complete\n      two-speaker audio system in a compatible 2014–2023 Harley-Davidson Road\n      Glide or Street Glide.\n    \u003c\/p\u003e\n\n    \u003cp\u003e\n      The included DS18 PRO-HY6.4MSL speakers combine a shallow 6.5-inch\n      midrange driver with a built-in 1-inch titanium compression driver. The\n      hybrid design delivers the midrange projection and high-frequency output\n      needed to overcome motorcycle, road and wind noise.\n    \u003c\/p\u003e\n\n    \u003cp\u003e\n      The DS18 ION1600.4D provides four channels of full-range Class-D power.\n      Two channels operate the included fairing speakers. The remaining two\n      channels can support a compatible rear-speaker pair after the correct\n      speakers, wiring, mounting hardware and amplifier setup are added.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"gbs-notice\"\u003e\n      \u003cstrong\u003ePlug-and-play clarification:\u003c\/strong\u003e The included\n      RY-HARNESS.HD provides a plug-and-play connection to compatible factory\n      Harley-Davidson radio wiring. The complete installation still requires\n      amplifier power wiring, speaker mounting, secure amplifier mounting and\n      proper gain and crossover setup.\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\" id=\"gbs-fitment\"\u003e\n    \u003ch2\u003eRoad Glide and Street Glide Fitment\u003c\/h2\u003e\n\n    \u003cdiv class=\"gbs-grid gbs-grid-2\"\u003e\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eRoad Glide Option\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Select Road Glide for a compatible 2014–2023 sharknose-fairing\n          motorcycle. This option must include the amplifier rack and\n          front-speaker installation components configured for the Road Glide\n          fairing.\n        \u003c\/p\u003e\n\n        \u003cul class=\"gbs-list\"\u003e\n          \u003cli\u003e2014–2023 Road Glide fairing configuration\u003c\/li\u003e\n          \u003cli\u003eRoad Glide-specific amplifier mounting solution\u003c\/li\u003e\n          \u003cli\u003eTwo front fairing speakers\u003c\/li\u003e\n          \u003cli\u003eFactory-radio integration harness\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eStreet Glide Option\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Select Street Glide for a compatible 2014–2023 batwing-fairing\n          motorcycle. This option must include the amplifier rack and\n          front-speaker installation components configured for the Street\n          Glide fairing.\n        \u003c\/p\u003e\n\n        \u003cul class=\"gbs-list\"\u003e\n          \u003cli\u003e2014–2023 Street Glide fairing configuration\u003c\/li\u003e\n          \u003cli\u003eStreet Glide-specific amplifier mounting solution\u003c\/li\u003e\n          \u003cli\u003eTwo front fairing speakers\u003c\/li\u003e\n          \u003cli\u003eFactory-radio integration harness\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gbs-notice\"\u003e\n      \u003cstrong\u003eConfirm the motorcycle before ordering:\u003c\/strong\u003e Verify the\n      model year, exact trim, Road Glide or Street Glide fairing, factory\n      radio, factory amplifier configuration and any existing audio\n      modifications.\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\" id=\"gbs-included\"\u003e\n    \u003ch2\u003eEverything Included in the Audio System\u003c\/h2\u003e\n\n    \u003cdiv class=\"gbs-component-list\"\u003e\n      \u003cdiv class=\"gbs-component\"\u003e\n        \u003ch3\u003eDS18 ION1600.4D Amplifier\u003c\/h3\u003e\n\n        \u003cp\u003e\n          One compact four-channel full-range Class-D amplifier rated for\n          240 watts RMS × 4 at 4 ohms, 400 watts RMS × 4 at 2 ohms and\n          800 watts RMS × 2 bridged at 4 ohms.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-component\"\u003e\n        \u003ch3\u003eTwo DS18 PRO-HY6.4MSL Speakers\u003c\/h3\u003e\n\n        \u003cp\u003e\n          One pair of 6.5-inch shallow hybrid speakers with 4-ohm impedance,\n          150-watt RMS power handling and built-in 1-inch titanium compression\n          drivers.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-component\"\u003e\n        \u003ch3\u003eDS18 RY-HARNESS.HD\u003c\/h3\u003e\n\n        \u003cp\u003e\n          A factory-radio plug-and-play amplifier harness with four-channel\n          RCA pre-output, oxygen-free copper wiring and water-resistant\n          construction.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-component\"\u003e\n        \u003ch3\u003eNVS 4-AWG Amplifier Power Kit\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Heavy-gauge amplifier power and ground wiring with quick-disconnect\n          hardware for cleaner installation, saddlebag removal and future\n          servicing.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-component\"\u003e\n        \u003ch3\u003eFront-Speaker Installation Components\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Fairing-specific speaker spacers, mounting hardware and installation\n          components are supplied according to the selected Road Glide or\n          Street Glide configuration.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-component\"\u003e\n        \u003ch3\u003eBike-Specific Amplifier Rack\u003c\/h3\u003e\n\n        \u003cp\u003e\n          The selected motorcycle option includes a Road Glide- or Street\n          Glide-specific amplifier mounting solution for a secure,\n          vibration-resistant installation.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gbs-notice\"\u003e\n      \u003cstrong\u003eTwo-speaker system:\u003c\/strong\u003e Rear speakers, saddlebag speaker\n      adapters, speaker lids, rear-speaker wiring and rear grilles are not\n      included unless specifically added to the order.\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\" id=\"gbs-channel-layout\"\u003e\n    \u003ch2\u003eSpeaker Impedance and Amplifier Channel Configuration\u003c\/h2\u003e\n\n    \u003cdiv class=\"gbs-grid gbs-grid-3\"\u003e\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eFront-Left Speaker\u003c\/h3\u003e\n\n        \u003cp\u003e\n          One PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its\n          dedicated ION1600.4D amplifier channel.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eFront-Right Speaker\u003c\/h3\u003e\n\n        \u003cp\u003e\n          The second PRO-HY6.4MSL speaker presents a nominal 4-ohm load to its\n          dedicated amplifier channel.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eTwo Available Channels\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Two amplifier channels remain available for compatible future rear\n          speakers after the required wiring and mounting components are\n          installed.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gbs-spec-table\"\u003e\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eIncluded Speaker Count\u003c\/div\u003e\n        \u003cdiv\u003eTwo speakers \/ one pair\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eSpeaker Impedance\u003c\/div\u003e\n        \u003cdiv\u003e4Ω per speaker\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eSpeaker Power Handling\u003c\/div\u003e\n        \u003cdiv\u003e150W RMS \/ 300W maximum per speaker\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eAmplifier Output at 4Ω\u003c\/div\u003e\n        \u003cdiv\u003e240W RMS per channel\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eFront-Left Channel\u003c\/div\u003e\n        \u003cdiv\u003eOne PRO-HY6.4MSL speaker at 4Ω\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eFront-Right Channel\u003c\/div\u003e\n        \u003cdiv\u003eOne PRO-HY6.4MSL speaker at 4Ω\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eLoaded Amplifier Channels\u003c\/div\u003e\n        \u003cdiv\u003eTwo\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eAvailable Amplifier Channels\u003c\/div\u003e\n        \u003cdiv\u003eTwo\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eBridging Required\u003c\/div\u003e\n        \u003cdiv\u003eNo\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gbs-notice\"\u003e\n      \u003cstrong\u003eOutput must be limited correctly:\u003c\/strong\u003e The ION1600.4D can\n      produce more continuous power at 4 ohms than each included speaker is\n      rated to handle. Correct gain, high-pass crossover and maximum clean\n      output settings are required.\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eDS18 ION1600.4D Four-Channel Amplifier\u003c\/h2\u003e\n\n    \u003cp\u003e\n      The DS18 ION1600.4D is a compact full-range Class-D amplifier that\n      provides substantial output from a motorcycle-friendly chassis. It can\n      power the included two-speaker system while retaining two channels for a\n      properly designed future expansion.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"gbs-grid gbs-grid-3\"\u003e\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003e240W × 4 at 4Ω\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Published four-channel output for compatible 4-ohm speaker systems.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003e400W × 4 at 2Ω\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Available for separately designed compatible 2-ohm speaker systems.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003e800W × 2 Bridged\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Published bridged output into compatible 4-ohm speaker loads.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eFour Full-Range Channels\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Two channels operate the included speakers while two remain\n          available for future rear-speaker expansion.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eCompact Chassis\u003c\/h3\u003e\n\n        \u003cp\u003e\n          The amplifier is designed to deliver high output from a compact\n          installation footprint.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eSystem Setup Controls\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Gain and crossover controls allow the output to be configured for\n          the included hybrid speakers.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gbs-spec-table\"\u003e\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eAmplifier Model\u003c\/div\u003e\n        \u003cdiv\u003eDS18 ION1600.4D\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eAmplifier Type\u003c\/div\u003e\n        \u003cdiv\u003eFour-channel full-range Class-D amplifier\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eOutput at 4Ω\u003c\/div\u003e\n        \u003cdiv\u003e240W RMS × 4 channels\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eOutput at 2Ω\u003c\/div\u003e\n        \u003cdiv\u003e400W RMS × 4 channels\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eBridged Output at 4Ω\u003c\/div\u003e\n        \u003cdiv\u003e800W RMS × 2 channels\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eMinimum Stereo Impedance\u003c\/div\u003e\n        \u003cdiv\u003e2Ω per channel\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eMinimum Bridged Impedance\u003c\/div\u003e\n        \u003cdiv\u003e4Ω\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eSystem Configuration\u003c\/div\u003e\n        \u003cdiv\u003eTwo channels used and two channels available\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eBuilt-In DSP\u003c\/div\u003e\n        \u003cdiv\u003eNo\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003ePower Wiring\u003c\/div\u003e\n        \u003cdiv\u003e4-AWG amplifier wiring required\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eDS18 PRO-HY6.4MSL 6.5-Inch Hybrid Speakers\u003c\/h2\u003e\n\n    \u003cp\u003e\n      Each PRO-HY6.4MSL combines a shallow 6.5-inch midrange driver with a\n      built-in 1-inch titanium compression driver. The two-way hybrid design\n      provides both midrange and upper-frequency output from the front fairing\n      speaker locations.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"gbs-grid gbs-grid-3\"\u003e\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003e150W RMS\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Each included speaker is rated for 150 watts RMS and 300 watts\n          maximum.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003e4-Ohm Impedance\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Each speaker presents a nominal 4-ohm load to its dedicated\n          amplifier channel.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eHybrid Two-Way Design\u003c\/h3\u003e\n\n        \u003cp\u003e\n          A built-in titanium compression driver supplies high-frequency\n          output without a separately mounted tweeter.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eShallow Mounting Depth\u003c\/h3\u003e\n\n        \u003cp\u003e\n          The 2.82-inch mounting depth supports tighter motorcycle fairing\n          installations.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eIP65 Rated\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Water-resistant construction helps protect the speakers in\n          motorcycle and powersports environments.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003e140Hz High-Pass Reference\u003c\/h3\u003e\n\n        \u003cp\u003e\n          DS18 publishes 140Hz as the recommended high-pass crossover\n          reference for this speaker.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gbs-spec-table\"\u003e\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eSpeaker Model\u003c\/div\u003e\n        \u003cdiv\u003eDS18 PRO-HY6.4MSL\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eQuantity Included\u003c\/div\u003e\n        \u003cdiv\u003eTwo speakers \/ one pair\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eNominal Size\u003c\/div\u003e\n        \u003cdiv\u003e6.5 inches \/ 165.1mm\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eNominal Impedance\u003c\/div\u003e\n        \u003cdiv\u003e4Ω per speaker\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003ePower Handling\u003c\/div\u003e\n        \u003cdiv\u003e150W RMS \/ 300W maximum per speaker\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eSensitivity\u003c\/div\u003e\n        \u003cdiv\u003e93dB, 1W \/ 1m\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eFrequency Response\u003c\/div\u003e\n        \u003cdiv\u003e100Hz–20kHz\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eRecommended High-Pass Crossover\u003c\/div\u003e\n        \u003cdiv\u003e140Hz\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eSpeaker Design\u003c\/div\u003e\n        \u003cdiv\u003eTwo-way shallow hybrid loudspeaker\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eMidrange Voice Coil\u003c\/div\u003e\n        \u003cdiv\u003e1.5 inches \/ 38.6mm\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eCompression Driver\u003c\/div\u003e\n        \u003cdiv\u003e1-inch titanium diaphragm with neodymium magnet\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eCone Material\u003c\/div\u003e\n        \u003cdiv\u003eWater-resistant treated paper\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eWeather Rating\u003c\/div\u003e\n        \u003cdiv\u003eIP65\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eMounting Cutout\u003c\/div\u003e\n        \u003cdiv\u003e5.6 inches \/ 142mm\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eMounting Depth\u003c\/div\u003e\n        \u003cdiv\u003e2.82 inches \/ 72mm\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eProtective Grille\u003c\/div\u003e\n        \u003cdiv\u003eIncluded with each speaker\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gbs-notice\"\u003e\n      \u003cstrong\u003eCheck fairing clearance:\u003c\/strong\u003e Pod modification, magnet-cap\n      clearance work, additional speaker spacing or other installation\n      adjustments may be required depending on the exact motorcycle and\n      factory enclosure.\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eFactory Harley-Davidson Radio Integration\u003c\/h2\u003e\n\n    \u003cp\u003e\n      The DS18 RY-HARNESS.HD connects a compatible 2014–2023 factory\n      Harley-Davidson radio system to the aftermarket amplifier without\n      cutting the primary factory-radio signal wiring.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"gbs-grid gbs-grid-3\"\u003e\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eOEM Plug-and-Play Connection\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Factory-style connections simplify amplifier signal integration.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eFour-Channel RCA Pre-Output\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Four RCA channels support the included four-channel amplifier and\n          future rear-speaker expansion.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eOFC Wiring\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Oxygen-free copper conductors and noise-rejecting RCA connections\n          support reliable signal transfer.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"gbs-list\"\u003e\n      \u003cli\u003eDesigned for compatible 2014–2023 Street Glide and Road Glide models\u003c\/li\u003e\n      \u003cli\u003eFactory-radio plug-and-play connection\u003c\/li\u003e\n      \u003cli\u003eFour-channel RCA pre-output\u003c\/li\u003e\n      \u003cli\u003eOxygen-free copper wiring\u003c\/li\u003e\n      \u003cli\u003eWater-resistant harness construction\u003c\/li\u003e\n      \u003cli\u003eNo cutting of the primary factory-radio signal wiring\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cdiv class=\"gbs-notice\"\u003e\n      \u003cstrong\u003eFactory configuration matters:\u003c\/strong\u003e Motorcycles with a\n      factory amplifier, CVO equipment, aftermarket radio or previous audio\n      modifications may require additional signal-integration work.\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003ePower Wiring and Amplifier Mounting\u003c\/h2\u003e\n\n    \u003cdiv class=\"gbs-grid gbs-grid-2\"\u003e\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003e4-AWG Amplifier Wiring\u003c\/h3\u003e\n\n        \u003cp\u003e\n          The included NVS power kit provides the heavy-gauge power and ground\n          wiring needed for the amplifier, along with quick-disconnect\n          connections for serviceability.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eRoad Glide or Street Glide Rack\u003c\/h3\u003e\n\n        \u003cp\u003e\n          Road Glide and Street Glide fairings use different amplifier\n          mounting layouts. The selected motorcycle option determines the\n          mounting solution supplied with the kit.\n        \u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cul class=\"gbs-list\"\u003e\n      \u003cli\u003eDisconnect the motorcycle battery before installation.\u003c\/li\u003e\n      \u003cli\u003eMount the amplifier securely with adequate airflow.\u003c\/li\u003e\n      \u003cli\u003eInstall the correct fuse protection near the battery connection.\u003c\/li\u003e\n      \u003cli\u003eProtect wiring from steering movement, sharp edges and heat.\u003c\/li\u003e\n      \u003cli\u003eUse clean, secure power and ground connections.\u003c\/li\u003e\n      \u003cli\u003eVerify all rack and fairing hardware before final assembly.\u003c\/li\u003e\n      \u003cli\u003eInspect battery and charging-system condition before high-output use.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eGain and Crossover Setup\u003c\/h2\u003e\n\n    \u003cp\u003e\n      Correct setup is required because the ION1600.4D can produce more\n      continuous power at 4 ohms than each included speaker is rated to\n      handle.\n    \u003c\/p\u003e\n\n    \u003cul class=\"gbs-list\"\u003e\n      \u003cli\u003eConnect one included speaker to each of two amplifier channels.\u003c\/li\u003e\n      \u003cli\u003eDo not bridge the amplifier channels for the included speakers.\u003c\/li\u003e\n      \u003cli\u003eConfigure the two active channels for high-pass operation.\u003c\/li\u003e\n      \u003cli\u003eUse 140Hz as the published speaker high-pass reference.\u003c\/li\u003e\n      \u003cli\u003eAdjust the final crossover for the fairing and intended output level.\u003c\/li\u003e\n      \u003cli\u003eSet amplifier gain using measured clean output.\u003c\/li\u003e\n      \u003cli\u003eDo not use the amplifier gain control as a volume control.\u003c\/li\u003e\n      \u003cli\u003eReduce output immediately if distortion or mechanical noise is heard.\u003c\/li\u003e\n      \u003cli\u003eVerify speaker polarity before closing the fairing.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cdiv class=\"gbs-notice\"\u003e\n      \u003cstrong\u003eProfessional setup recommended:\u003c\/strong\u003e Incorrect gain or\n      crossover settings can damage the included speakers even when the\n      system initially appears to play normally.\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eFuture Rear-Speaker Expansion\u003c\/h2\u003e\n\n    \u003cp\u003e\n      The two unused amplifier channels provide a direct path for a future\n      rear-speaker upgrade. Rear expansion must be designed around compatible\n      speaker impedance, RMS power handling, mounting depth, wiring and\n      crossover requirements.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"gbs-grid gbs-grid-2\"\u003e\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eAlready Available in the System\u003c\/h3\u003e\n\n        \u003cul class=\"gbs-list\"\u003e\n          \u003cli\u003eTwo unused amplifier channels\u003c\/li\u003e\n          \u003cli\u003eFour-channel factory-radio interface\u003c\/li\u003e\n          \u003cli\u003eIndependent amplifier channel controls\u003c\/li\u003e\n          \u003cli\u003e4-AWG amplifier power foundation\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-info-box\"\u003e\n        \u003ch3\u003eRequired for Rear Expansion\u003c\/h3\u003e\n\n        \u003cul class=\"gbs-list\"\u003e\n          \u003cli\u003eCompatible rear speakers\u003c\/li\u003e\n          \u003cli\u003eSaddlebag lids, adapters or speaker pods\u003c\/li\u003e\n          \u003cli\u003eRear-speaker wiring and connectors\u003c\/li\u003e\n          \u003cli\u003eCorrect impedance and RMS-power matching\u003c\/li\u003e\n          \u003cli\u003eFinal crossover and gain setup\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gbs-notice\"\u003e\n      \u003cstrong\u003eRear equipment is not included:\u003c\/strong\u003e This remains a\n      two-speaker audio system until compatible rear speakers, mounting\n      components and wiring are purchased and installed.\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\" id=\"gbs-specs\"\u003e\n    \u003ch2\u003eComplete System Specifications\u003c\/h2\u003e\n\n    \u003cdiv class=\"gbs-spec-table\"\u003e\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eSystem Type\u003c\/div\u003e\n        \u003cdiv\u003eTwo-speaker plug-and-play motorcycle audio system\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eMotorcycle Options\u003c\/div\u003e\n        \u003cdiv\u003eRoad Glide or Street Glide\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eVehicle Application\u003c\/div\u003e\n        \u003cdiv\u003eCompatible 2014–2023 Harley-Davidson models\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eAmplifier\u003c\/div\u003e\n        \u003cdiv\u003eDS18 ION1600.4D four-channel Class-D amplifier\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eAmplifier Output at 4Ω\u003c\/div\u003e\n        \u003cdiv\u003e240W RMS × 4 channels\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eIncluded Speakers\u003c\/div\u003e\n        \u003cdiv\u003eTwo DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eSpeaker Impedance\u003c\/div\u003e\n        \u003cdiv\u003e4Ω per speaker\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eSpeaker Power Handling\u003c\/div\u003e\n        \u003cdiv\u003e150W RMS \/ 300W maximum per speaker\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eLoaded Amplifier Channels\u003c\/div\u003e\n        \u003cdiv\u003eTwo channels at 4Ω each\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eAvailable Amplifier Channels\u003c\/div\u003e\n        \u003cdiv\u003eTwo\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eFactory-Radio Interface\u003c\/div\u003e\n        \u003cdiv\u003eDS18 RY-HARNESS.HD\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003ePower Wiring\u003c\/div\u003e\n        \u003cdiv\u003eNVS 4-AWG amplifier power kit with quick disconnect\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eAmplifier Mounting\u003c\/div\u003e\n        \u003cdiv\u003eRoad Glide- or Street Glide-specific mounting solution\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eBuilt-In DSP\u003c\/div\u003e\n        \u003cdiv\u003eNo\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eRear Speakers Included\u003c\/div\u003e\n        \u003cdiv\u003eNo\u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-spec-row\"\u003e\n        \u003cdiv\u003eShopify Option\u003c\/div\u003e\n        \u003cdiv\u003eChoose Road Glide or Street Glide\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eFitment and Ordering Notes\u003c\/h2\u003e\n\n    \u003cdiv class=\"gbs-notice\"\u003e\n      \u003cstrong\u003eSubmit complete motorcycle information:\u003c\/strong\u003e Confirm the\n      year, exact model, fairing style, factory radio, factory amplifier and\n      current speaker configuration before ordering.\n    \u003c\/div\u003e\n\n    \u003cul class=\"gbs-list\"\u003e\n      \u003cli\u003eSelect Road Glide or Street Glide before adding the kit to the cart.\u003c\/li\u003e\n      \u003cli\u003eThe package includes two front fairing speakers.\u003c\/li\u003e\n      \u003cli\u003eEach included speaker has a nominal 4-ohm impedance.\u003c\/li\u003e\n      \u003cli\u003eTwo amplifier channels remain available for future expansion.\u003c\/li\u003e\n      \u003cli\u003eThe amplifier does not include built-in DSP.\u003c\/li\u003e\n      \u003cli\u003eFactory-amplified motorcycles may require additional integration.\u003c\/li\u003e\n      \u003cli\u003eSpeaker pod modification or additional spacing may be required.\u003c\/li\u003e\n      \u003cli\u003eCorrect gain and high-pass crossover setup are required.\u003c\/li\u003e\n      \u003cli\u003eRear speakers and rear mounting components are not included.\u003c\/li\u003e\n      \u003cli\u003eProfessional installation and system setup are recommended.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eBest For\u003c\/h2\u003e\n\n    \u003cul class=\"gbs-list\"\u003e\n      \u003cli\u003e2014–2023 Harley-Davidson Road Glide audio upgrades\u003c\/li\u003e\n      \u003cli\u003e2014–2023 Harley-Davidson Street Glide audio upgrades\u003c\/li\u003e\n      \u003cli\u003eRiders retaining a compatible factory Harley-Davidson radio\u003c\/li\u003e\n      \u003cli\u003eHigh-output two-speaker fairing systems\u003c\/li\u003e\n      \u003cli\u003eRiders planning to add saddlebag speakers later\u003c\/li\u003e\n      \u003cli\u003eFour-channel systems designed for staged expansion\u003c\/li\u003e\n      \u003cli\u003eProfessional motorcycle audio installations\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eRelated Motorcycle Audio Categories\u003c\/h2\u003e\n\n    \u003cdiv class=\"gbs-link-columns\"\u003e\n      \u003cdiv class=\"gbs-link-card\"\u003e\n        \u003ch3\u003eSpeakers and Amplifiers\u003c\/h3\u003e\n\n        \u003cul class=\"gbs-list\"\u003e\n          \u003cli\u003e\u003ca href=\"https:\/\/garagebaggerstereo.com\/pages\/motorcycle-speakers\"\u003eShop Motorcycle Speakers\u003c\/a\u003e\u003c\/li\u003e\n          \u003cli\u003e\u003ca href=\"https:\/\/garagebaggerstereo.com\/collections\/motorcycle-amplifiers\"\u003eMotorcycle Amplifiers\u003c\/a\u003e\u003c\/li\u003e\n          \u003cli\u003e\u003ca href=\"https:\/\/garagebaggerstereo.com\/collections\/motorcycle-amplifier-parts\"\u003eMotorcycle Amplifier Parts\u003c\/a\u003e\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-link-card\"\u003e\n        \u003ch3\u003eSignal and Electrical Support\u003c\/h3\u003e\n\n        \u003cul class=\"gbs-list\"\u003e\n          \u003cli\u003e\u003ca href=\"https:\/\/garagebaggerstereo.com\/collections\/motorcycle-digital-sound-processors\"\u003eMotorcycle DSP and Signal Integration\u003c\/a\u003e\u003c\/li\u003e\n          \u003cli\u003e\u003ca href=\"https:\/\/garagebaggerstereo.com\/collections\/motorcycle-batteries\"\u003eMotorcycle Audio Batteries\u003c\/a\u003e\u003c\/li\u003e\n          \u003cli\u003e\u003ca href=\"https:\/\/garagebaggerstereo.com\/pages\/get-a-custom-build\"\u003ePlan a Complete Motorcycle Audio System\u003c\/a\u003e\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"gbs-link-card\"\u003e\n        \u003ch3\u003eInstallation Support\u003c\/h3\u003e\n        \u003cul class=\"gbs-list\"\u003e\n          \u003cli\u003e\u003ca href=\"https:\/\/garagebaggerstereo.com\/pages\/motorcycle-audio-installation-taylors-sc\"\u003eMotorcycle Audio Installation in Taylors, SC\u003c\/a\u003e\u003c\/li\u003e\n          \u003cli\u003e\u003ca href=\"https:\/\/garagebaggerstereo.com\/pages\/get-a-custom-build\"\u003eRequest a Custom Audio Build\u003c\/a\u003e\u003c\/li\u003e\n          \u003cli\u003e\u003ca href=\"https:\/\/garagebaggerstereo.com\/collections\/motorcycle-batteries\"\u003eMotorcycle Audio Batteries\u003c\/a\u003e\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-card\"\u003e\n    \u003ch2\u003eDS18 2-Speaker Plug-and-Play Audio System FAQ\u003c\/h2\u003e\n\n    \u003cdiv class=\"gbs-faq\"\u003e\n      \u003ch3\u003eHow many speakers are included?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        The system includes two DS18 PRO-HY6.4MSL 6.5-inch hybrid speakers for\n        the front fairing.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eWhat impedance are the included speakers?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        Each included speaker has a nominal impedance of 4 ohms.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eHow much power can each speaker handle?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        Each PRO-HY6.4MSL is rated for 150 watts RMS and 300 watts maximum.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eHow much power does the amplifier produce at 4 ohms?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        The ION1600.4D is rated for up to 240 watts RMS on each of its four\n        channels at 4 ohms.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eIs the amplifier too powerful for the speakers?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        The amplifier can produce more continuous power than each speaker is\n        rated to handle. It can be used safely when gain, high-pass crossover\n        and maximum clean output are configured correctly.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eAre all four amplifier channels used?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        No. The supplied two-speaker system uses two channels. Two additional\n        channels remain available for a compatible future rear-speaker pair.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eDoes the system work with the factory Harley-Davidson radio?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        The included RY-HARNESS.HD is designed to integrate an aftermarket\n        amplifier with compatible 2014–2023 Harley-Davidson factory radios.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eDoes the factory radio wiring need to be cut?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        The compatible factory-radio signal connection uses a plug-and-play\n        harness and does not require cutting the primary factory signal\n        wiring.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eDoes the amplifier include DSP?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        No. The ION1600.4D provides conventional gain and crossover controls\n        but does not include digital signal processing.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eAre the speakers weather resistant?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        Yes. The speakers are IP65 rated and use a water-resistant treated\n        paper cone. They should not be described as submersible.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eCan rear speakers be added later?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        Yes. The two available amplifier channels can power a properly matched\n        rear-speaker pair after the required speakers, mounting hardware,\n        wiring and system setup are added.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eIs the Road Glide amplifier rack the same as the Street Glide rack?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        No. Road Glide and Street Glide fairings require different amplifier\n        mounting configurations. Select the correct motorcycle option before\n        ordering.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eWill the speakers fit without modification?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        Fitment depends on the exact fairing enclosure and existing equipment.\n        Speaker pod modification, additional spacing or other clearance work\n        may be required.\n      \u003c\/p\u003e\n\n      \u003ch3\u003eAre saddlebag speakers included?\u003c\/h3\u003e\n\n      \u003cp\u003e\n        No. This is a two-speaker audio system. Rear speakers, saddlebag\n        mounting components and rear-speaker wiring must be purchased\n        separately.\n      \u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"gbs-dark-card\" id=\"gbs-help\"\u003e\n    \u003ch2\u003eNeed Help Matching This 2-Speaker Harley Audio System?\u003c\/h2\u003e\n\n    \u003cp\u003e\n      Garage Bagger Stereo can help verify Road Glide or Street Glide\n      fitment, speaker impedance selection, amplifier matching, fairing and\n      amplifier mounting, power and speaker wiring, and factory-radio signal\n      integration before installation.\n    \u003c\/p\u003e\n\n    \u003cdiv class=\"gbs-btn-row gbs-btn-row-center\"\u003e\n      \u003ca class=\"gbs-btn-primary\" href=\"https:\/\/garagebaggerstereo.com\/pages\/motorcycle-audio-installation-taylors-sc\"\u003e\n        Installation Services\n      \u003c\/a\u003e\n\n      \u003ca class=\"gbs-btn-primary\" href=\"https:\/\/garagebaggerstereo.com\/pages\/get-a-custom-build\"\u003e\n        Request a Custom Build\n      \u003c\/a\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n\u003c\/section\u003e\n\n\u003cstyle\u003e\n.gbs-ds18-1423-2speaker{\n  max-width:1400px;\n  margin:auto;\n  clear:both;\n  color:#111;\n  font-family:inherit;\n}\n\n.gbs-ds18-1423-2speaker *,\n.gbs-ds18-1423-2speaker *::before,\n.gbs-ds18-1423-2speaker *::after{\n  box-sizing:border-box;\n}\n\n.gbs-ds18-1423-2speaker .gbs-hero{\n  display:grid;\n  grid-template-columns:minmax(0,1.35fr) minmax(300px,.9fr);\n  margin-bottom:24px;\n  overflow:hidden;\n  border-radius:22px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-hero-left{\n  padding:34px 36px;\n  background:#fff5ec;\n}\n\n.gbs-ds18-1423-2speaker .gbs-eyebrow{\n  margin-bottom:10px;\n  color:#ff5a00;\n  font-size:1rem;\n  font-weight:900;\n  letter-spacing:.08em;\n  line-height:1.2;\n  text-transform:uppercase;\n}\n\n.gbs-ds18-1423-2speaker .gbs-hero-left h1{\n  margin:0 0 14px;\n  color:#111;\n  font-size:clamp(2rem,3.2vw,2.75rem);\n  font-weight:900;\n  line-height:1.08;\n}\n\n.gbs-ds18-1423-2speaker .gbs-hero-left p{\n  margin:0 0 14px;\n  color:#111;\n  font-size:1.28rem;\n  line-height:1.7;\n}\n\n.gbs-ds18-1423-2speaker .gbs-hero-right{\n  padding:34px 30px;\n  background:linear-gradient(135deg,#2a2a2a 0%,#1c1c1c 55%,#111 100%);\n  color:#fff;\n}\n\n.gbs-ds18-1423-2speaker .gbs-hero-right h2{\n  margin:0 0 16px;\n  color:#ff5a00;\n  font-size:2rem;\n  font-weight:900;\n  line-height:1.12;\n}\n\n.gbs-ds18-1423-2speaker .gbs-hero-right ul{\n  margin:0 0 0 1.2em;\n  padding:0;\n}\n\n.gbs-ds18-1423-2speaker .gbs-hero-right li{\n  margin-bottom:8px;\n  color:#fff;\n  font-size:1.18rem;\n  line-height:1.65;\n}\n\n.gbs-ds18-1423-2speaker .gbs-card{\n  margin-bottom:24px;\n  padding:28px;\n  background:#fff;\n  border:1px solid rgba(0,0,0,.12);\n  border-radius:18px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-card h2{\n  position:relative;\n  margin:0 0 16px;\n  padding-bottom:14px;\n  color:#111;\n  font-size:2.15rem;\n  font-weight:900;\n  line-height:1.12;\n}\n\n.gbs-ds18-1423-2speaker .gbs-card h2::after{\n  content:\"\";\n  position:absolute;\n  right:0;\n  bottom:0;\n  left:0;\n  height:4px;\n  background:#ff5a00;\n  border-radius:999px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-card h3,\n.gbs-ds18-1423-2speaker .gbs-component h3{\n  margin:20px 0 10px;\n  color:#111;\n  font-size:1.48rem;\n  font-weight:900;\n  line-height:1.2;\n}\n\n.gbs-ds18-1423-2speaker .gbs-card p,\n.gbs-ds18-1423-2speaker .gbs-card li,\n.gbs-ds18-1423-2speaker .gbs-spec-row div,\n.gbs-ds18-1423-2speaker .gbs-component p{\n  color:#111;\n  font-size:1.28rem;\n  line-height:1.78;\n}\n\n.gbs-ds18-1423-2speaker .gbs-card p{\n  margin:0 0 14px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-list{\n  margin:14px 0 0 1.35em;\n  padding:0;\n}\n\n.gbs-ds18-1423-2speaker .gbs-list li{\n  margin-bottom:8px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-grid{\n  display:grid;\n  gap:18px;\n  margin-top:20px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-grid-2{\n  grid-template-columns:repeat(2,minmax(0,1fr));\n}\n\n.gbs-ds18-1423-2speaker .gbs-grid-3{\n  grid-template-columns:repeat(3,minmax(0,1fr));\n}\n\n.gbs-ds18-1423-2speaker .gbs-info-box,\n.gbs-ds18-1423-2speaker .gbs-link-card,\n.gbs-ds18-1423-2speaker .gbs-component{\n  display:block;\n  padding:22px;\n  background:#fff5ec;\n  border:1px solid rgba(0,0,0,.12);\n  border-radius:16px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-info-box h3,\n.gbs-ds18-1423-2speaker .gbs-link-card h3,\n.gbs-ds18-1423-2speaker .gbs-component h3{\n  margin-top:0;\n}\n\n.gbs-ds18-1423-2speaker .gbs-info-box p,\n.gbs-ds18-1423-2speaker .gbs-component p{\n  margin-bottom:0;\n}\n\n.gbs-ds18-1423-2speaker .gbs-component-list{\n  display:grid;\n  grid-template-columns:repeat(2,minmax(0,1fr));\n  gap:18px;\n  margin-top:20px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-spec-table{\n  margin-top:18px;\n  overflow:hidden;\n  border:1px solid rgba(0,0,0,.12);\n  border-radius:14px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-spec-row{\n  display:grid;\n  grid-template-columns:minmax(190px,34%) minmax(0,66%);\n  border-top:1px solid rgba(0,0,0,.1);\n}\n\n.gbs-ds18-1423-2speaker .gbs-spec-row:first-child{\n  border-top:none;\n}\n\n.gbs-ds18-1423-2speaker .gbs-spec-row div{\n  padding:14px 16px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-spec-row div:first-child{\n  background:#fff5ec;\n  font-weight:900;\n}\n\n.gbs-ds18-1423-2speaker .gbs-notice{\n  margin:18px 0;\n  padding:16px 18px;\n  background:#111;\n  border-left:6px solid #ff5a00;\n  border-radius:14px;\n  color:#fff;\n  font-size:1.15rem;\n  line-height:1.6;\n}\n\n.gbs-ds18-1423-2speaker .gbs-notice strong{\n  color:#ff5a00;\n}\n\n.gbs-ds18-1423-2speaker .gbs-link-columns{\n  display:grid;\n  grid-template-columns:repeat(3,minmax(0,1fr));\n  gap:18px;\n  margin-top:20px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-card a,\n.gbs-ds18-1423-2speaker .gbs-link-card a{\n  color:#111 !important;\n  font-weight:900;\n  text-decoration:none !important;\n  border-bottom:2px solid rgba(255,90,0,.45);\n}\n\n.gbs-ds18-1423-2speaker .gbs-faq h3{\n  padding-left:14px;\n  border-left:5px solid #ff5a00;\n}\n\n.gbs-ds18-1423-2speaker .gbs-btn-row{\n  display:flex;\n  flex-wrap:wrap;\n  gap:12px;\n  margin-top:18px;\n}\n\n.gbs-ds18-1423-2speaker .gbs-btn-row-center{\n  justify-content:center;\n}\n\n.gbs-ds18-1423-2speaker .gbs-btn-primary{\n  display:inline-flex;\n  align-items:center;\n  justify-content:center;\n  padding:13px 20px;\n  background:#ff5a00;\n  border:none !important;\n  border-radius:999px;\n  color:#111 !important;\n  font-size:1.02rem;\n  font-weight:900;\n  line-height:1;\n  text-align:center;\n  text-decoration:none !important;\n}\n\n.gbs-ds18-1423-2speaker .gbs-dark-card{\n  margin-bottom:28px;\n  padding:40px 28px;\n  background:linear-gradient(135deg,#2a2a2a 0%,#1c1c1c 55%,#111 100%);\n  border:1px solid rgba(255,255,255,.12);\n  border-radius:22px;\n  text-align:center;\n}\n\n.gbs-ds18-1423-2speaker .gbs-dark-card h2{\n  margin:0 0 14px;\n  color:#ff5a00;\n  font-size:2.2rem;\n  font-weight:900;\n  line-height:1.12;\n}\n\n.gbs-ds18-1423-2speaker .gbs-dark-card p{\n  max-width:900px;\n  margin:0 auto 18px;\n  color:#fff;\n  font-size:1.35rem;\n  line-height:1.85;\n}\n\n@media(max-width:1100px){\n  .gbs-ds18-1423-2speaker .gbs-grid-3,\n  .gbs-ds18-1423-2speaker .gbs-link-columns{\n    grid-template-columns:1fr;\n  }\n}\n\n@media(max-width:980px){\n  .gbs-ds18-1423-2speaker .gbs-hero{\n    grid-template-columns:1fr;\n    margin-bottom:18px;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-hero-left,\n  .gbs-ds18-1423-2speaker .gbs-hero-right{\n    padding:22px;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-eyebrow{\n    margin-bottom:8px;\n    font-size:.85rem;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-hero-left h1{\n    margin-bottom:10px;\n    font-size:1.85rem;\n    line-height:1.1;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-hero-left p{\n    margin-bottom:10px;\n    font-size:1.05rem;\n    line-height:1.55;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-hero-right h2{\n    margin-bottom:12px;\n    font-size:1.55rem;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-hero-right li{\n    font-size:1.05rem;\n    line-height:1.55;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-card{\n    margin-bottom:18px;\n    padding:22px;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-card h2,\n  .gbs-ds18-1423-2speaker .gbs-dark-card h2{\n    font-size:1.65rem;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-card h3,\n  .gbs-ds18-1423-2speaker .gbs-component h3{\n    font-size:1.28rem;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-card p,\n  .gbs-ds18-1423-2speaker .gbs-card li,\n  .gbs-ds18-1423-2speaker .gbs-spec-row div,\n  .gbs-ds18-1423-2speaker .gbs-component p,\n  .gbs-ds18-1423-2speaker .gbs-dark-card p{\n    font-size:1.08rem;\n    line-height:1.65;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-info-box,\n  .gbs-ds18-1423-2speaker .gbs-link-card,\n  .gbs-ds18-1423-2speaker .gbs-component{\n    padding:18px;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-grid-2,\n  .gbs-ds18-1423-2speaker .gbs-component-list,\n  .gbs-ds18-1423-2speaker .gbs-spec-row{\n    grid-template-columns:1fr;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-spec-row div:first-child{\n    padding-bottom:4px;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-spec-row div:last-child{\n    padding-top:4px;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-notice{\n    font-size:1rem;\n    line-height:1.5;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-btn-primary{\n    padding:12px 16px;\n    font-size:.95rem;\n  }\n}\n\n@media(max-width:720px){\n  .gbs-ds18-1423-2speaker .gbs-btn-row{\n    flex-direction:column;\n  }\n\n  .gbs-ds18-1423-2speaker .gbs-btn-primary{\n    width:100%;\n  }\n}\n\u003c\/style\u003e","brand":"DS18 Motorcycle Audio","offers":[{"title":"Road Glide","offer_id":47174740017378,"sku":"14-23RGPNP","price":1023.68,"currency_code":"USD","in_stock":true},{"title":"Street Glide","offer_id":47174740050146,"sku":"14-23SGPNP","price":1023.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1929\/9923\/files\/ds18-2014-2023-harley-road-street-glide-two-speaker-front-stage-audio-kit.png?v=1784734796","url":"https:\/\/garagebaggerstereo.com\/products\/ds18-2014-2023-harley-2-speaker-plug-and-play-audio-system","provider":"Garage Bagger Stereo","version":"1.0","type":"link"}